118
FEATURES All Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility Rigid one-piece neck/body construction for long-term stability Impervious to climate for consistent performance, wherever you go 22.75” scale length 14 fret to the body Carbon fiber neck for consistent playability (No truss rod adjustments needed, EVER!) Proprietary carbon fiber bridge and saddle materials for maximum sound transfer Proprietary Reinforced Polymer Fretboard with 21 medium stainless steel frets, top dots & side dots 15 degree headstock pitch Optional premium electronics for easy and clear amplification Offset sound hole with integrated top bracing technology™ (IBT™) Ultra-Precise tuning machines with 18:1 ratio Handcrafted in the USA by skilled technicians and craftsmen Gig bag included Ships with Elixr ® Nanoweb® strings, .012-.053 Model: Composite Acoustics™ Cargo Available Finishes: High gloss Carbon Burst, Solid Red, Solid Blue, Solid Metallic Charcoal, Solid White or in our Satin Back RAW carbon fiber top finish. Custom Tribal finish available on Red, Blue, White and Charcoal finishes.

Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•

Rigid one-piece neck/body construction for long-term stability•

Impervious to climate for consistent performance, wherever you go•

22.75” scale length•

14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•

Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•

Proprietary Reinforced Polymer Fretboard with 21 medium stainless steel frets, top dots & side dots•

15 degree headstock pitch•

Optionalpremiumelectronicsforeasyandclearamplification•

Offsetsoundholewithintegratedtopbracingtechnology™(IBT™)•

Ultra-Precise tuning machines with 18:1 ratio•

Handcrafted in the USA by skilled technicians and craftsmen•

Gig bag included•

ShipswithElixr• ®Nanoweb® strings, .012-.053

Model: Composite Acoustics™ CargoAvailable Finishes: High gloss Carbon Burst, Solid Red, Solid Blue, Solid Metallic Charcoal,

SolidWhiteorinourSatinBackRAWcarbonfibertopfinish.

CustomTribalfinishavailableonRed,Blue,WhiteandCharcoalfinishes.

Page 2: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONS & STRING HEIGHT SETUP SPECSScale/Length: 22.75”, 21 frets

a.WidthatNut:1.75”(44.45mm)

b.WidthatLastFret:2.25”(57.15mm)

c.Thicknessat1stFret:.81”(20.57mm)

d.Thicknessat12thFret:.86”(21.84mm)

Radius: 14”

SPECIFICATIONSNeckMaterial:CarbonFiber

NeckType:“C”neckshape

HardwareColor:BlackChrome

Fingerboard: Proprietary Reinforced Polymer

Fretboard

Inlays: Side marker, aluminum dot

Frets: 21, 2.13 mm wide, .99mm tall, Stainless

Steel

Bridge:ProprietaryCarbonComposite

Pickup:L.R.BaggsActiveElement*

*Seewww.lrbaggs.comfordetailedspecificationsofon-boardelectronics

CustomTribalfinish

StringHeightSpecification

1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”

Page 3: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

CargoBasicDimensions

Page 4: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•

Rigid one-piece neck/body construction for long-term stability•

Impervious to climate for consistent performance, wherever you go•

14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•

Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•

15 degree headstock pitch•

Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•

AvailablewiththeL.R.BaggsStageProPick-upsystemwithon-boardEQandTuner•

Center sound hole with brushed stainless sound hole ring•

Performancetunedlightweightcarbonfiberbracing•

Ultra-precise tuning machines with 18:1 ratio•

Handcrafted in the USA by skilled technicians and craftsmen•

Lite case included•

ShipswithElixr• ®Nanoweb® strings, .012-.053

Model: Composite Acoustics™ OXAvailable Finishes:

High gloss Carbonburst, Solid Red, Solid Blue, Solid Metallic, Charcoal, Solid White or

inourSatinBackRAWcarbonfibertopfinish

Page 5: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 20 frets

a.WidthatNut:1.75”(44.45mm)

b.WidthatLastFret:2.125”(53.98mm)

c.Thicknessat1stFret:.81”(20.57mm)

d.Thicknessat12thFret:.86”(21.84mm)

Radius: 14”

SPECIFICATIONSNeckMaterial:CarbonFiber

NeckType:“C”neckshape

HardwareColor:BlackChrome

Fingerboard: Proprietary Reinforced Polymer

Inlays: Side marker, aluminum dot

Frets: 2.13 mm wide, .99mm tall, Stainless Steel

Bridge:Proprietary Carbon Composite

Pickup:L.R.BaggsStageProElement*

*Seewww.lrbaggs.comfordetailedspecificationsofon-boardelectronics

StringHeightSpecification

1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”

Page 6: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

OXBasicDimensions

1.757

2.324

14.978

40.772

2.986

11.108

1.804

.885

3.748

.600

3.583

Action at 12th FretApprox. 0.090"

Drawing NTS All Dimensions Approximate

Page 7: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•Rigid one-piece neck/body construction for long-term stability•Impervious to climate for consistent performance, wherever you go•14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•Slenderergonomicdesign,voicedtoextendlowendresponse•15 degree headstock pitch•Availablewith1.75”nutwidthornew“NarrowNeck”1.69”nutwidth•Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•AvailablewiththeFishman®PrefixPlusTorFishmanAura®pickup/preampsystems•Center sound hole with abalone sound hole ring•Performancetunedlightweightcarbonfiberbracing•Ultra-precise tuning machines with 18:1 ratio•Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•Handcrafted in the USA by skilled technicians and craftsmen•Hardshell case included•ShipswithElixr• ®Nanoweb® strings, .012-.053

Model: Composite Acoustics™ GXAvailable Finishes: High gloss Carbon Burst or Wine Red Burst

Page 8: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 20 frets

a.WidthatNut:

Regular:1.75”(44.45mm)

NarrowNeck:1.69”(42.93mm)

b. Width at Last Fret:

Regular:2.25”(57.15mm)

NarrowNeck:2.125”(53.98mm)

c.Thicknessat1stFret:.81”(20.57mm)

d.Thicknessat12thFret:.86”(21.84mm)

Radius: 14”

SPECIFICATIONSNeckMaterial:CarbonFiber

NeckType:“C”neckshape

HardwareColor:BlackChrome

Fingerboard: Proprietary Reinforced Polymer

Inlays: Side marker, aluminum dot

Frets: 2.13 mm wide, .99mm tall, Stainless Steel

Bridge:Proprietary Carbon Composite

Pickup:FishmanPrefixPlusT(standard)

Fishman®Aura®(premiumupgrade)

*Seewww.fishman.comfordetailedspecificationsofon-boardelectronics

The Fishman Aura system includes 6 images of the GX model:

1. DPA 4011 small diaphragm condenser2.NeumannM147largediaphragmcondenser3.Shure®Beta58®dynamiccardioid4.NeumannKM84smalldiaphragmcondenser5.NeumannU87largediaphragmcondenser6. Schoeps CMC64g small diaphragm condenser

TheAuraallowsforseparateEQ’ngofthepickupandimages,aswellasseparatephasecontrol.

StringHeightSpecification

1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”

Page 9: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

GXBasicDimensions

14.14111.386

25.528

5.995

40.600

2.143 1.740

40.600

4.688

20.61219.989

16.014

NarrowNeck

11.386

5.995

40.600

2.268 1.825

25.528

14.141

40.600

4.688

20.61219.989

16.014

WideNeck

Page 10: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•

Rigid one-piece neck/body construction for long-term stability•

Impervious to climate for consistent performance, wherever you go•

14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•

Slenderergonomicdesign,voicedtoextendlowendresponse•

15 degree headstock pitch•

Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•

AvailablewiththeFishman®PrefixPlusTorFishmanAura®pickup/preampsystems•

Offsetsoundholewithintegratedtopbracingtechnology™(IBT™)forimprovedbassresponse•

Ultra-precise tuning machines with 18:1 ratio•

Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•

Handcrafted in the USA by skilled technicians and craftsmen•

Hardshell case included•

ShipswithElixr• ®Nanoweb® strings, .012-.053

Model: Composite Acoustics™ GXiAvailable Finishes: High gloss Solid Red, Solid Blue, Solid Metallic Charcoal, Wine Red Burst or Carbon Burst

Page 11: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 20 frets

a.WidthatNut:

Regular:1.75”(44.45mm)

NarrowNeck:1.69”(42.93mm)

b. Width at Last Fret:

Regular:2.25”(57.15mm)

NarrowNeck:2.125”(53.98mm)

c.Thicknessat1stFret:.81”(20.57mm)

d.Thicknessat12thFret:.86”(21.84mm)

Radius: 14”

SPECIFICATIONSNeckMaterial:CarbonFiber

NeckType:“C”neckshape

HardwareColor:BlackChrome

Fingerboard: Proprietary Reinforced Polymer

Inlays: Side marker, aluminum dot

Frets: 2.13 mm wide, .99mm tall, Stainless Steel

Bridge:Proprietary Carbon Composite

Pickup:FishmanPrefixPlusT(standard)

FishmanAura(premiumupgrade)

*Seewww.fishman.comfordetailedspecificationsofon-boardelectronics

The Fishman Aura system includes 6 images of the GX model:

1. DPA 4011 small diaphragm condenser2.NeumannM147largediaphragmcondenser3.Shure®Beta58®dynamiccardioid4.NeumannKM84smalldiaphragmcondenser5.NeumannU87largediaphragmcondenser6. Schoeps CMC64g small diaphragm condenser

TheAuraallowsforseparateEQ’ngofthepickupandimages,aswellasseparatephasecontrol.

StringHeightSpecification

1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”

Page 12: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

GXi*BasicDimensions

14.14111.386

25.528

5.995

40.600

2.143 1.740

40.600

4.688

20.61219.989

16.014

NarrowNeck

11.386

5.995

40.600

2.268 1.825

25.528

14.141

40.600

4.688

20.61219.989

16.014

WideNeck

*GXidimensionssameasGX(shown)

Page 13: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•Rigid one-piece neck/body construction for long-term stability•Impervious to climate for consistent performance, wherever you go•14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•Slenderergonomicdesign,voicedtoextendlowendresponse•15 degree headstock pitch•Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•AvailablewiththeL.R.BaggsActiveElementpickupsystem•Center sound hole with abalone sound hole ring•Performancetunedlightweightcarbonfiberbracing•Ultra-precise tuning machines with 18:1 ratio•Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•Handcrafted in the USA by skilled technicians and craftsmen•

Hardshell case included•ShipswithElixr• ®Nanoweb® strings, .012-.053

Model: Composite Acoustics™ XAvailable Finishes: High Gloss Carbon Burst, Wine Red Burst, Solid Red and Solid Blue

Page 14: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 20 frets

a.WidthatNut:1.75”(44.45mm)

b.WidthatLastFret:2.25”(57.15mm)

c.Thicknessat1stFret:.81”(20.57mm)

d.Thicknessat12thFret:.86”(21.84mm)

Radius: 14”

SPECIFICATIONSNeckMaterial:CarbonFiber

NeckType:“C”neckshape

HardwareColor:BlackChrome

Fingerboard: Proprietary Reinforced Polymer

Inlays: Side marker, aluminum dot

Frets: 2.13 mm wide, .99mm tall, Stainless Steel

Bridge:Proprietary Carbon Composite

Pickup:L.R.BaggsActiveElement

*Seewww.lrbaggs.comfordetailedspecificationsofon-boardelectronics

StringHeightSpecification

1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”

Page 15: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

X*BasicDimensions

2.986

14.1

4619

.996

40.5

63

1.757

2.269

25.5

39

15.2543.136

*XdimensionssameasXi(shown)

Page 16: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

All Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•Rigid one-piece neck/body construction for long-term stability•Impervious to climate for consistent performance, wherever you go•14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•Slenderergonomicdesign,voicedtoextendlowendresponse•15 degree headstock pitch•Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•AvailablewiththeL.R.BaggsActiveElementpickupsystem•Offsetsoundholewithintegratedtopbracingtechnology™(IBT™)forimprovedbassresponse•Performancetunedlightweightcarbonfiberbracing•Ultra-precise tuning machines with 18:1 ratio•Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•Handcrafted in the USA by skilled technicians and craftsmen•

Hardshell case included•ShipswithElixr• ®Nanoweb® strings, .012-.053

FEATURES

Model: Composite Acoustics™ XiAvailable Finishes: High Gloss Carbon Burst, Wine Red Burst, Solid Red and Solid Blue

Page 17: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 20 frets

a.WidthatNut:1.75”(44.45mm)

b.WidthatLastFret:2.25”(57.15mm)

c.Thicknessat1stFret:.81”(20.57mm)

d.Thicknessat12thFret:.86”(21.84mm)

Radius: 14”

SPECIFICATIONSNeckMaterial:CarbonFiber

NeckType:“C”neckshape

HardwareColor:BlackChrome

Fingerboard: Proprietary Reinforced Polymer

Inlays: Side marker, aluminum dot

Frets: 2.13 mm wide, .99mm tall, Stainless Steel

Bridge:Proprietary Carbon Composite

Pickup:L.R.BaggsActiveElement

*Seewww.lrbaggs.comfordetailedspecificationsofon-boardelectronics

StringHeightSpecification

1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”

Page 18: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

XiBasicDimensions

2.986

14.1

4619

.996

40.5

63

1.757

2.269

25.5

39

15.2543.136

Page 19: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•Rigid one-piece neck/body construction for long-term stability•Impervious to climate for consistent performance, wherever you go•14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•Slenderergonomicdesign,voicedtoextendlowendresponse•15 degree headstock pitch•Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•AvailablewiththeFishman®PrefixPlusTorFishmanAura®pickup/preampsystems•Center sound hole with abalone sound hole ring•Performancetunedlightweightcarbonfiberbracing•Ultra-precise tuning machines with 18:1 ratio•Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•Handcrafted in the USA by skilled technicians and craftsmen•

Hardshell case included•ShipswithElixr• ®Nanoweb® strings, .012-.053

Model: Composite Acoustics™ LegacyAvailable Finishes: High Gloss Carbon Burst, Wine Red Burst, and

SatinbackRAWCarbonFibertop

Page 20: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 20 frets

a.WidthatNut:1.75”(44.45mm)

b.WidthatLastFret:2.25”(57.15mm)

c.Thicknessat1stFret:.81”(20.57mm)

d.Thicknessat12thFret:.86”(21.84mm)

Radius: 14”

SPECIFICATIONSNeckMaterial:CarbonFiber

NeckType:“C”neckshape

HardwareColor:BlackChrome

Fingerboard: Proprietary Reinforced Polymer

Inlays: Side marker, aluminum dot

Frets: 2.13 mm wide, .99mm tall, Stainless Steel

Bridge:Proprietary Carbon Composite

Pickup:FishmanPrefixPlusT(standard)

FishmanAura(premiumupgrade)

*Seewww.fishman.comfordetailedspecificationsofon-boardelectronics

The Fishman Aura system includes 6 images:

1. DPA 4011 small diaphragm condenser2.NeumannM147largediaphragmcondenser3.Shure®Beta58®dynamiccardioid4.NeumannKM84smalldiaphragmcondenser5.NeumannU87largediaphragmcondenser6. Schoeps CMC64g small diaphragm condenser

TheAuraallowsforseparateEQ’ngofthepickupandimages,aswellasseparatephasecontrol.

StringHeightSpecification

1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”

Page 21: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

LegacyBasicDimensions

19.973

25.510

1.75

7

11.35512.746

20.62519.973

40.598

25.510

4.50

915

.989

Page 22: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Composer™ Parlor GuitarAvailableFinishes:Natural,Sunburst

FEATURESParlor style guitar •

Spruce Laminate top•

Rosewood bridge•

Rosewoodfingerboard•

EasternMahoganyneck•

14 degree angled headstock•

24.75” scale•

18 Frets•

Dovetailneckjoint•

NaturalorSunburstfinishes•

Page 23: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length:24.75”(628mm)

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.20”(56mm)

c.Thicknessat1stFret:.83”(21mm)

d.Thicknessat9thFret:.90”(24mm)

Radius: 15.75”

SPECIFICATIONSNeckMaterial:EasternMahogany

Hardware Color: Chrome

Fretboard: Rosewood

Inlays: Perloid dots

Frets: 18, 2.2mm nickel

Bridge:Rosewood

Body:SapeleLaminate

Page 24: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Composer™ MandolinAvailable Finishes: Sunburst

FEATURESExclusivePowerPlateincreasessustain•Exclusivesidewingventforextravolume•MapleNeckandBody•Laminate spruce top•Traditional neck shape•Set neck•13.77” Scale length•Rosewoodfingerboard•Flatfingerboardradius•Nutwidth:1.18”•Chrome hardware•Vintagestyleopenmachineheads•Adjustablefloatingrosewoodbridge•Chrome mandolin bridge•Dualexpandingtrussrod•

Page 25: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length:13.77”(350mm)

a.WidthatNut:1.18”(30mm)

b.WidthatLastFret:2.75”(44.38mm)

c.Thicknessat1stFret:.85”(21.5mm)

d.Thicknessat9thFret:.97”(24.6mm)

Radius: Flat

SPECIFICATIONSNeckMaterial:Maple

Hardware Color: Chrome

Fretboard: Rosewood

Inlays: White dots

Frets: 2 mm

Bridge:Rosewood

Body:Maple

Top: Laminate Spruce

Page 26: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Composer™ Resonator GuitarAvailable Finishes: Sunburst

FEATURESMaple body•Mahogany neck•Rosewoodfingerboard•Body,Neckbinding•Composerstyle“teardrop”soundholes•25 1/2” Scale length•1.69”Nutwidth•15.75” Radius•Aluminum resonator cone•Chrome hardware•Composerstyle“teardrop”12thfretmarkers•

Page 27: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length:25.5”(650mm)

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.2”(56mm)

c.Thicknessat1stFret:.83”(21mm)

d.Thicknessat9thFret:.90”(23mm)

Radius: 15.75”

SPECIFICATIONSNeckMaterial:Mahogany

Hardware Color: Chrome

Fretboard: Rosewood

Inlays: White dots

Frets: 2.3 mm

Bridge:Rosewood

Body:Maple

Top: Laminate Maple

Page 28: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Composer™ GuitaleleAvailableFinishes:Natural

FEATURESMahogany neck•Sapele body•Rosewoodfingerboard•Rosewood bridge•17” Scale length•1.89” nut width•Chrome machine heads•Dualexpandingtrussrod•Intervals tuned like a normal 6 string guitar•1st and 6th strings tuned to A•

Page 29: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length:17”(433mm)

a.WidthatNut:1.89”(30mm)

b.WidthatLastFret:2.75”(48mm)

c.Thicknessat1stFret:.85”(21.5mm)

d.Thicknessat9thFret:.92.5”(23.5mm)

Radius: Flat

SPECIFICATIONSNeckMaterial:Mahogany

Hardware Color: Chrome

Fretboard: Rosewood

Inlays: Abalone dots

Frets: 1.65 mm

Bridge:Rosewood

Body:Sapele

Top: Sapele

Page 30: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Composer™ UkuleleAvailableFinishes:Natural

FEATURESLaminate spruce top•

Sapele back and sides•

Mahogany neck•

Rosewoodfingerboard•

Rosewood bridge•

Chrome die cast tuning machines•

Page 31: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length:15.66”(398mm)

a.WidthatNut:1.5”(38mm)

b.WidthatLastFret:1.75”(44.5mm)

c.Thicknessat1stFret:.63”(16mm)

d.Thicknessat9thFret:.73”(18.5mm)

Radius: Flat

SPECIFICATIONSNeckMaterial:Mahogany

Hardware Color: Chrome

Fretboard: Rosewood

Inlays: White dots

Frets: 1.8mm

Bridge:Rosewood

Body:Sapele

Top: Spruce laminate

Page 32: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Composer™ 3/4 Scale ClassicalAvailableFinishes:Natural

FEATURESMahogany neck•

Sapele back and sides•

Laminate spruce top•

Chrome classical tuning machines•

Rosewood fretboard•

Rosewood bridge•

Naturalsatinfinish•

Dualexpandingtrussrod•

Page 33: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length:231/4””(590mm)

a.WidthatNut:1.89”(48mm)

b.WidthatLastFret:2.37”(60.2mm)

c.Thicknessat1stFret:.846”(21.5mm)

d.Thicknessat9thFret:.90”(23mm)

Radius: Flat

SPECIFICATIONSNeckMaterial:Mahogany

Hardware Color: Chrome

Fretboard: Rosewood

Inlays:None

Frets: 19, 2mm

Bridge:Rosewood

Body:Sapele

Top: Spruce laminate

Page 34: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: DW & DW-1 AcousticAvailableFinishes:Natural

FEATURESMahogany neck•Sapele back and sides•Laminate spruce top•Die cast tuning machines•Rosewood fretboard•Undersaddle Piezo pickup•Rosewood bridge•Naturalfinish•Dualexpandingtrussrod•Passive piezo pickup•25.5” scale length•

Page 35: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length:25.5””(647.7mm)

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.24”(56.9mm)

c.Thicknessat1stFret:.84”(21.5mm)

d.Thicknessat9thFret:.924”(23.5mm)

Radius:15.75”(400mm)

SPECIFICATIONSNeckMaterial:Mahogany

Hardware Color: Chrome

Fretboard: Rosewood

Inlays: White dots

Frets: 20

Bridge:Rosewood

Body:Sapele

Top: Spruce laminate

Page 36: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: DW-2 AcousticAvailableFinishes:Natural

FEATURESMahogany neck•

Sapele back and sides•

Laminate spruce top•

Die cast tuning machines•

Rosewood fretboard•

Rosewood bridge•

Naturalfinish•

Dualexpandingtrussrod•

Active electronics with piezo pickup•

25.5” scale length•

Gig bag included•

Page 37: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length:25.5””(647.7mm)

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.24”(56.9mm)

c.Thicknessat1stFret:.84”(21.5mm)

d.Thicknessat9thFret:.924”(23.5mm)

Radius:15.75”(400mm)

SPECIFICATIONSNeckMaterial:Mahogany

Hardware Color: Chrome

Fretboard: Rosewood

Inlays: White dots

Frets: 20

Bridge:Rosewood

Body:Sapele

Top: Spruce laminate

Onboard electronics includes chromatic tuner.

Page 38: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: DW-3 AcousticAvailableFinishes:Natural

FEATURESMahogany neck•

Rosewood back and sides•

Solid Sitka spruce top•

Gold plated die cast tuning machines•

Rosewood fretboard•

Rosewood bridge•

Naturalfinish•

Dualexpandingtrussrod•

Premium electronics with piezo pickup & internal microphone•

25.5” scale length•

Hardshell Case included•

Page 39: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length:25.5””(647.7mm)

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.24”(56.9mm)

c.Thicknessat1stFret:.84”(21.5mm)

d.Thicknessat9thFret:.924”(23.5mm)

Radius:15.75”(400mm)

SPECIFICATIONSNeckMaterial:Mahogany

Hardware Color: Chrome

Fretboard: Rosewood

Inlays: White dots

Frets: 20

Bridge:Rosewood

Body:Maple

Top: Solid Sitka Spruce

Onboard electronics includes onboard micro-

phone and undersaddle Piezo with blend knob.

Preamp includes chromatic tuner.

Page 40: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: SC™-1AvailableFinishes:Black,Cherryburst,VintageTobaccoburst

FEATURES24.75” scale•22 Jumbo frets•15 degree headstock pitch•RockMapleneckwithRosewoodfingerboard•Chrome plated hardware•2 Peavey custom designed humbucking pickups•Three- a-side, diecast tuners, keystone buttons•1.69” nut width•2 volume and 2 tone controls•D style neck shape•Composite topnut•14” fretboard radius•4 bolt neck attachment with steel plate•Heavy duty tailpiece and bridge•Basswoodbody•Deeply carved top•Bodyandneckcolormatched•Dual action torsion rod•Availablefinishes:Black(BLK),Cherryburst(CHB),VintageTobaccoburst(VTB)•

Page 41: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 24.75”, 22 frets

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.24”(57mm)

c.Thicknessat1stFret:.846”(21.5mm)

d.Thicknessat12thFret:.896”(22.75mm)

Radius: 14”

BRIDGE PICKUPPeavey®USADesignSC™series1voicedforbridgeposition

Construction: Humbucking, dual coil

MagnetType: Ceramic 5 magnet

Description: Output frequency tailored for bridge position, 11.5k dc. Fully shielded with chrome

cover.4conductorshieldedhookupcable.Fullywaxsaturatedtoeliminateunwantednoiseand

feedback.Adjustable6screwpolepiecedesign.Pickupdesignedforclearhighend,evenmidand

bassresponsewithextendedoutputforextrapunchforleadandsoloplayingwithoutharshness.

SPECIFICATIONSNeckMaterial:Maple

NeckType:SC™seriesDneckshape.Bolton

Hardware Color: Chrome

BodyWood:Basswood

Fingerboard: Rosewood

Inlays: Top marker white Dot 6mm, side marker white dot 2mm

Frets: 2.7mm wide,1.1mm tall, nickel silver

Bridge:Tune ‘o matic, chrome die cast top mount tailpiece

NeckPickup:Humbuckerwithchromecover

BridgePickup:Humbuckerwithchromecover

Page 42: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

NECK PICKUP

SC-1 PICKUP SWITCHING

PeaveyUSADesignSC™series1voicedforneckposition

Construction: Humbucking, dual coil

MagnetType: Ceramic 5 magnet

Description: Output frequency tailored for bridge position, 7.2k dc. Fully shielded with chrome cov-

er.4conductorshieldedhookupcable.Fullywaxsaturatedtoeliminateunwantednoiseandfeed-

back.6screwadjustablepolepiecedesign.Pickupdesignedforclearhighend,evenmidandbass

response. Special winding and coil design allows for sweet high end presence even at high volumes

and clarity of pick attack when using tone control.

NECK

BRIDGE

SELECTOR POSITION

B NM B NM B NM

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase

PeaveyPart#00722780NylonGuitarBag

Page 43: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: SC™-2AvailableFinishes:Black,Cherryburst,VintageTobaccoburst

FEATURES

24.75” scale•22 Jumbo frets•15 degree headstock pitch•RockMapleneckwithRosewoodfingerboard•Chrome plated hardware•2- Peavey USA Design SC2 series alnico humbucking pickups•Three- a-side, diecast tuners, keystone buttons, 15-1 Ratio•1.69” nut width •2 volume and 2 tone controls•D style neck shape•14” fretboard radius•Setneckwith“extendedtail”construction•Heavy duty tailpiece and bridge•Basswoodbody•Deeply carved top•Composite topnut•Bodyandneckcolormatched•Dual action torsion rod•Availablefinishes:• Black(BLK),Cherryburst(CHB),VintageTobaccoburst(VTB)

Page 44: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 24.75”, 22 frets

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.25”(57.5mm)

c.Thicknessat1stFret:.846”(21.5mm)

d.Thicknessat12thFret:.896”(22.75mm)

Radius: 14”

SPECIFICATIONSNeckMaterial:Maple

NeckType:SCseriesDneckshape,setneck

Hardware Color: Chrome

BodyWood:Basswood

Fingerboard: Rosewood

Inlays: Top marker white Dot 6mm, side marker white dot 2mm

Frets: 2.7mm wide,1.1mm tall, 18% nickel silver

Bridge:Tune-o-matic, chrome w/die cast top mount tailpiece

NeckPickup:Humbuckerwithchromecover

BridgePickup:Humbuckerwithchromecover

SPECIAL FEATURES

Improved upper fret access. Specially design and calibrated SC series Alnico pickups voiced for

eachposition.Sleek,comfortablebodydesignwithrearwaistcutaway.“ExtendedTailConstruction”

referstothewaytheneckisattachedtothebody.OntheSC™-2,theneckpocketisextendedallthe

way to the pickup cavity, vastly increasing the amount of contact area of the neck to the integral cen-

ter body section of the body. This has the effect of increasing the sustain of the guitar and is a feature

not seen on guitars costing many times as much as the SC-2.

Page 45: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

NECK PICKUP

PeaveyUSADesignSCseries2voicedforneckposition

Construction: Humbucking, dual coil

MagnetType: Calibrated Alnico 2 bar magnet

Description: Output and frequency response tailored for neck position, 7.4k dc. Fully shielded with

chromecover.4conductorshieldedhookupcable,fullywaxsaturatedtoeliminateunwantednoise

andfeedback.6screwadjustablepolepiecedesign.Pickupdesignedforclearhighend,medium

output with smooth, warm low end without being muddy. The combination of a calibrated Alnico 2

barmagnetandprecisecoilwindingprocessmakestheSC-2neckperfectforJazz,Bluesandthe

vintage“womantone”madepopularinthelate60’s.Evenatthehighestvolumelevels,theSC-2

neck pickup will remain articulate, yet warm and smooth. Awesome picking dynamics and full range

ofresponsearetrademarksoftheSC-2neckpickup.Volumecontrolw’rolloffcircuitretainshighend

even at reduced volume levels.

BRIDGE PICKUPPeavey®USADesignSC™series2voicedforbridgeposition

Construction: Humbucking, dual coil

MagnetType: Alnico 5 bar magnet

Description: Output and frequency tailored for SC-2 body/neck construction, 12k dc. Fully shielded

withchromecover.4conductorshieldedhookupcable,fullywaxsaturatedtoeliminateunwanted

noiseandfeedback.Adjustable6screwpolepiecedesign.Pickupdesignedforclearhighend,

increased output and even midrange response. Calibrated Alnico 5 magnet adds warmth and in-

creased output. Frequency tailored coil winding improves high end presence for smooth sustain and

extra“bite”forsoloandleadwork.Volumecontrolwithrolloffcircuitretainshighendwithdecreased

Page 46: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

SC™-2 PICKUP SWITCHING

NECK

BRIDGE

SELECTOR POSITION

B NM B NM B NM

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase

PeaveyPart#00722780NylonGuitarBag

Page 47: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: SC™-3AvailableFinishes:Black,White

FEATURES24.75” Scale•22 Jumbo frets•BlockInlays•Gold Hardware•Dualactionadjustabletorsionrod,15degreeheadstockpitch•MahoganyneckwithRosewoodfingerboard•1.69”(43mm)Compositenut•3-Peavey USA Design custom humbucking pickups•3 a side diecast tuners with 15-1 gear ratio, 24k gold plated•Keystonebuttons•2 volume and 2 tone controls positioned for easier swells•D style neck shape•14”fingerboardradiusforeaseofbendinginupperregisterandimprovedchordinginlowerregister•Heavy duty tailpiece and bridge mounting hardware for improved sustain and tone•Solid Mahogany body with integral center body section•Deeply carved top•Bodyandneckcolormatched•Composite topnut•Pull-pot controls the middle pickup on/off for many tonal options•Availablefinishes:Black(BLK),White(WHT)•

Page 48: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 24.75”, 22 frets

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.25”(57.5mm)

c.Thicknessat1stFret:.846”(21.5mm)

d.Thicknessat12thFret:.896”(22.75mm)

Radius: 14”

SPECIFICATIONSNeckMaterial:Mahogany

NeckType:SCseriesDneckshape,setneck

Hardware Color: 24k Gold Plated

BodyWood:3pcMahogany

Fingerboard: Rosewood

Inlays: Pearloid rectangle blocks, side markers black dot

Frets: 2.7mm wide,1.1mm tall, 18% nickel silver

Bridge:Tune-o-matic, gold plated w/die cast top mount heavy duty tailpiece

NeckPickup:HumbuckerwithGoldcover

Middle Pickup: Humbucker with Gold cover

BridgePickup:HumbuckerwithGoldcover

SPECIAL FEATURES

Improved upper fret access. Specially design and calibrated SC™ series Alnico pickups voiced for

eachposition.Sleek,comfortablebodydesignwithrearwaistcutaway.The“Extendednecktail

construction”combinedwiththeintegralcenterbodysection,allowsformaximumsoniccoupling

of neck and body . The SC-3 has a pull-pot for the on/off switch of the middle pickup. This means

many more times the tonal options than a conventional 3 pickup guitar. With the pickup off, the 3 way

pickup switch operates only the bridge and neck pickups. With the pickup on, 3 brand new tonal op-

tionsareavailable(seethepickupchartattheendofthisdocumentformoredetailedinformation).

Page 49: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUPPeavey®USADesignSC™series3voicedforbridgepositionConstruction: Humbucking, dual coil MagnetType: Alnico 5 bar magnetDescription: Output and frequency response tailored for SC-3 body/neck contruction-11.5kdc. Fully shieldedwithgoldcover.4conductorshieldedhookupcable.Fullywaxsaturatedtoeliminateun-wantednoiseandfeedback.6screwadjustablepolepiecedesign.Pickupdesignedforclearhighend, increased output with even mid range response. Calibrated Alnico 5 magnet adds warmth and increased output. Frequency tailored coil winding improves high end presence for smooth sustain and extra“bite”forsoloandleadwork.Volumecontrolwithrolloffcircuitretainshighendwithdecreasedvolume. The perfect bridge pickup that is hot but articulate with superb dynamics.

MIDDLE PICKUPPeaveyUSADesignSCseries3voicedforbridgepositionConstruction: Humbucking, dual coil MagnetType: Alnico 5 bar magnetDescription: Output and frequency response tailored for SC-3 middle position- -9.2k dc. Fully shieldedwithgoldcover.4conductorshieldedhookupcable.Fullywaxsaturatedtoeliminateunwantednoiseandfeedback.6screwadjustablepolepiecedesign.Pickupdesignedforclearhighend, increased output with even mid range response. Calibrated Alnico 5 magnet adds warmth and increased output. Frequency tailored coil winding improves high end presence for smooth sustain andextra“bite”forsoloandleadwork.Pickupworksindependentlywithpush/pulltonecontrolCanbe used singly or in combination with bridge or neck pickup enabling multiple combinations of tone choices.

NECK PICKUPPeaveyUSADesignSCseries3voicedforneckpositionConstruction: Humbucking, dual coil MagnetType: Calibrated Alnico 2 bar magnetDescription: Output and frequency response tailored for neck position, 7.2k dc. Fully shielded with goldcover.4conductorshieldedhookupcable.Fullywaxsaturatedtoeliminateunwantednoiseandfeedback.6screwadjustablepolepiecedesign.Pickupdesignedforclearhighend,mediumoutputwith smooth, warm low end without being muddy. The combination of a calibrated Alnico 2 bar mag-netandprecisecoilwindingprocessmakestheSC-3neckperfectforJazz,Bluesandthevintage“womantone”madepopularinthelate60’s.Evenatthehighestvolumelevels,theSC-3neckpickupwill remain articulate, yet warm and smooth. Awesome picking dynamics and full range of response are trademarks of the SC-3 neck pickup.

Page 50: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

SC™-3 PICKUP SWITCHING

MIDDLE

NECK

BRIDGE

SELECTOR POSITION (Normal Operation)

B NM B NM B NM

PULL POT TO ENABLE MIDDLE PICK-UP

Thank you for purchasing genuine peavey® producTs!

MIDDLE

NECK

BRIDGE

SELECTOR POSITION (Pot Pulled Selector Operation)

B NM B NM B NM

PULL POT TO ENABLE MIDDLE PICK-UP

AVAILABLE CASES/BAGS

Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase

PeaveyPart#00722780NylonGuitarBag

Page 51: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: AT-200™AvailableFinishes:Black,CandyAppleRed

FEATURESAmazing automatic tuning via Antares• ® Auto-Tune™ for guitar system

25.5” scale•

Three-way switching selector for both the active Auto-Tune system and passive pickups•

Sealed diecast tuners, 15-1 gear ratio•

Master volume with momentary switch to initiate String-tune and Solid-tune™ function•

Master tone control. Pull up to turn off active system and change to passive pickups•

2 Peavey custom designed humbucking pickups•

BasswoodBody•

Dual action torsion rod•

Stringthrubodyformaximumsustain•

1/4”and8pinDINconnectors.8pinDINconnectorincludedforusewithoptionalAT200-Bbreak-•

outbox.(moredetailsonfollowingpages)

Batterypoweredvia4AAcells.CanalsoberemotelypoweredwithAT200-Bbreakoutbox•

Availablefinishes:Black(BLK),CandyAppleRed(CAR)•

Upgrade software packages available through Antares via www.autotuneforguitar.com. Please •

visit the website for a listing of available software upgrades

Black

Candy Apple Red

Page 52: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 24 frets

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.25”(57.5mm)

c.Thicknessat1stFret:.807”(20.5mm)

d.Thicknessat12thFret:.886”(22.5mm)

Radius: 15.75”

SPECIFICATIONS

NeckMaterial:Maple

NeckType:Bolton,5boltdesign,shallowovalshape

HardwareColor:Black

BodyWood:Basswood

Fingerboard: Rosewood

Inlays: 4mm white dots

Frets:24-frets2.5mmwidex1.1mmtall

Bridge:DiecastwithPiezotuners

NeckPickup: Humbucking, dual coil.

BridgePickup: Humbucking, dual coil.

IncludedAntarespickuptones*:

Neckhumbucking,bridgehumbuckingorboth.

*UpgradesoftwarepackagesavailablethroughAntaresviahttp://guitar.auto-tune.com.Pleasevisitthe website for a listing of available software upgrades.

Page 53: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUP

Peavey® USA Design

Construction:Humbucking,DesignedspecificallyfortheAT-200™Bridgeposition

MagnetType:Calibratedceramicmagnet,epoxypottedcoils,solidcovers

Description: High output, harmonically positioned humbucking, dual coil pickup, 16k dc. Terminated

and wound for low noise operation. 2 conductor shielded hookup wire. Alnico 5 magnet calibrated for

bridge position. Coils frequency calibrated and metered to enhance midrange and high end response

with increased output for cutting solo work and tight low end response. High output without harsh-

ness.

NECK PICKUP

Peavey USA Design

Construction:Humbucking,DesignedspecificallyfortheAT-200Neckposition

MagnetType:Calibratedceramicmagnet,epoxypottedcoils,solidcovers

Description: Specificallydesignedforneckposition,12kdc.Terminatedandwoundforlownoise

operation. 2 conductor shielded hookup wire. Medium high output. Harmonically positioned to en-

hance harmonics, presence and attack in neck position. Metered coil winding and matched magnetic

structure allow increased dynamic range without muddiness at higher volume.

Page 54: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

AT-200 PICKUP SWITCHING

NECK

BRIDGE

SELECTOR POSITION

B NM B NM B NM

PULL POT FOR COIL TAP (Middle Position)

(Pull Pot In Down Position)

AVAILABLE CASES/BAGS

Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase

PeaveyPart#00722780NylonGuitarBag

Page 55: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Thank you for purchasing genuine peavey® producTs!

AT200-B Breakout Box--available separately

WiththeAT-200B*,youcangreatlyenhancetheexperienceofplayingyourAT-200guitar.NoneedforbatteriestheAT-200BremotelypowerstheAT-200,ensuringnoproblemswithdeadbatteries!Theincluded8-pinDINcablealsocarriestheguitar’soutputbackdowntothebox,wherea1/4”outputallowsyoutodirectyoursignaltoyoureffectsoramplifier.Inaddition,theMIDIjacksontheAT-200BconnecttheAT-200guitartotheworldofMIDIcontrol!SoftwareupgradepackagesavailablefromAn-tares will offer a myriad of great new features for the AT-200, all of which can be controlled via MIDI. Pleasevisithttp://guitar.auto-tune.comformoreinformationaboutsoftwareupgrades.ByregisteringyourAT-200attheAntares’Auto-TuneforGuitarwebsitehttp://guitar.auto-tune.com,youbecomeeligibletodownloadanyfuturefirmwareupdatesintoyourguitarusingtheAT-200BBreakoutBoxand a MIDI interface for your computer.

*Peaveyitemnumber03016340

Page 56: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Predator™ Plus STAvailable Finishes:

FEATURES

25.5” scale•

Three-way switching selector•

Sealed diecast tuners, 15-1 gear ratio•

Master volume and tone controls with push/pull tone for single coil operation•

2 Peavey custom designed humbucking pickups•

Bindingonbody•

BasswoodBody•

PremiumAAAquiltedmaplecaponTransparentcolors,handstainedusingPeavey’sexclusive4•

step deep stain color process

Dual action torsion rod•

Stringthrubodyformaximumsustain•

Availablefinishes:Black(BLK),CandyAppleRed(CAR),SnowyWhite(SNW)•

andVintageBurst(VBS)

Black Candy Apple Red Vintage BurstSnowy White

Page 57: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 24 frets

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.25”(57.5mm)

c.Thicknessat1stFret:.768”(19.5mm)

d.Thicknessat12thFret:.886”(22.5mm)

Radius: 15.75”

SPECIFICATIONS

NeckMaterial:NorthAmericanRockmaple

NeckType:Bolton,5boltdesign,shallowovalshape

HardwareColor:Black

BodyWood:Basswood

Fingerboard: Rosewood

Inlays: 4mm white dots

Frets:24-frets2.7mmwidex1.1mmtall

Bridge:DiecastTunematicstyle,steelsaddles

NeckPickup:Humbucking,dualcoil,exposedbobbin.

BridgePickup:Humbucking,dualcoil,exposedbobbin.

Single coil mode on both pickups is available thru push pull.

Master tone switching allowing multiple tone combinations.

Page 58: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUP

Peavey® USA Design

Construction:Humbucking,DesignedspecificallyforthePredator™Bridgeposition

MagnetType:CalibratedAlnico5magnet,exposedcoils

Description: High output, harmonically positioned humbucking, dual coil pickup, 16k dc. Terminated

and wound for low noise operation. 4 conductor shielded hookup wire. Alnico 5 magnet calibrated for

bridge position. Coils frequency calibrated and metered to enhance midrange and high end response

withincreasedoutputforcuttingsoloworkandtightlowendresponse.Pickupdesignedspecifically

for Predator body construction. High output without harshness.

NECK PICKUP

Peavey USA Design

Construction:Humbucking,DesignedspecificallyforthePredatorNeckposition

MagnetType:CalibratedAlnico5magnet,exposedcoils

Description: SpecificallydesignedforPredatorneckposition,12kdc.Terminatedandwoundfor

low noise operation. 4 conductor shielded hookup wire. Medium high output. Harmonically po-

sitioned to enhance harmonics, presence and attack in neck position. Metered coil winding and

matched magnetic structure allow increased dynamic range without muddiness at higher volume.

This pickup is perfectly matched to the Predator bridge pickup for balanced tone and response.

Page 59: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

PREDATOR™ ST PICKUP SWITCHING

NECK

BRIDGE

SELECTOR POSITION

B NM B NM B NM

PULL POT FOR COIL TAP (Middle Position)

(Pull Pot In Down Position)

NECK

BRIDGE

SELECTOR POSITION

B NM

PULL POT FOR COIL TAP

B NM B NM

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase

PeaveyPart#00722780NylonGuitarBag

Page 60: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Predator™ PlusAvailable Finishes:

FEATURES

25.5” scale•

Three-way switching selector•

Sealed diecast tuners, 15-1 gear ratio•

Master volume and tone controls with push/pull tone for single coil operation•

2 Peavey custom designed humbucking pickups•

Bindingonbody•

BasswoodBody•

Licensed Floyd Rose® double-locking tremolo•

Dual action torsion rod•

Availablefinishes:Black(BLK),CandyAppleRed(CAR)•

Black

Candy Apple Red

Page 61: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 22 frets

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.25”(57.5mm)

c.Thicknessat1stFret:.768”(19.5mm)

d.Thicknessat12thFret:.846”(21.5mm)

Radius: 15”

SPECIFICATIONSNeckMaterial:NorthAmericanRockmaple

NeckType:Bolton,5boltdesign,shallowovalshape

HardwareColor:Black

BodyWood:Basswood,3pcw’integralcentersection

Fingerboard: Rosewood

Inlays: 4mm white dots

Frets:22-frets2.7mmwidex1.1mmtall

Bridge:Licensed Floyd Rose® double-locking tremolo

NeckPickup: Humbucking,dualcoil,exposedbobbin.

BridgePickup:Humbucking,dualcoil,exposedbobbin.

Single coil mode on both pickups is available thru push pull. Mas-

ter tone switching allowing multiple tone combinations.

Page 62: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUPPeavey® USA Design

Construction:Humbucking,DesignedspecificallyforthePredator™Bridgeposition

MagnetType:Calibratedceramicmagnet,exposedcoils

Description: High output, harmonically positioned humbucking, dual coil pickup, 16k dc. Terminated

and wound for low noise operation. 4 conductor shielded hookup wire. Calibrated for bridge position.

Coils frequency calibrated and metered to enhance midrange and high end response with increased

outputforcuttingsoloworkandtightlowendresponse.PickupdesignedspecificallyforPredator

body construction. High output without harshness.

NECK PICKUP

Peavey USA Design

Construction:Humbucking,DesignedspecificallyforthePredatorNeckposition

MagnetType:Calibratedceramicmagnet,exposedcoils

Description: SpecificallydesignedforPredatorneckposition,12kdc.Terminatedandwoundfor

low noise operation. 4 conductor shielded hookup wire. Medium high output. Harmonically po-

sitioned to enhance harmonics, presence and attack in neck position. Metered coil winding and

matched magnetic structure allow increased dynamic range without muddiness at higher volume.

This pickup is perfectly matched to the Predator bridge pickup for balanced tone and response.

Page 63: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

PREDATOR™ PICKUP SWITCHING

NECK

BRIDGE

SELECTOR POSITION

B NM B NM B NM

PULL POT FOR COIL TAP (Middle Position)

(Pull Pot In Down Position)

NECK

BRIDGE

SELECTOR POSITION

B NM

PULL POT FOR COIL TAP

B NM B NM

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase

PeaveyPart#00722780NylonGuitarBag

Page 64: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: JF™-1 GuitarAvailable Finishes:

FEATURES

24 3/4 inch scale, set-neck guitar with hard rock-maple neck•

Rosewoodfretboardandmaplemulti-laminatebodywithfiguredmaplecap•

Cream binding on body and neck•

22fretswithnewCustomBow-tieinlay•

Die-cast machine heads with tulip buttons•

Tune-o-matic bridge and stop tailpiece•

Two humbucking pickups•

Black/white/blackpickguard•

Two tone and two volume controls with three-way switch•

Gold-plated hardware•

Case available through Peavey Accessory Program•

Dual action torsion rod•

Availablefinishes:Black(BLK),TransparentRed(TRD),Sunburst(SNB)•

Black

Transparent Red

Sunburst

Page 65: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 24 3/4”, 22 frets

a.WidthatNut:1.69”(43mm)

b.WidthatLastFret:2.24”(56.896mm)

c.Thicknessat1stFret:0.825”(20.955mm)

d.Thicknessat12thFret:0.865”(21.971mm)

Radius: 12”

SPECIFICATIONSNeckMaterial:Mahogany

NeckType:Set neck

Hardware Color: Gold Plated

BodyWood:LaminatedMaple

Fingerboard: Rosewood

Inlays: Acrylic pearloid bow-tie

Frets:22-frets2.7mmwidex1.1mmtall,nickelsilver

Bridge:Tune-o-maticstylebridge

NeckPickup:Ceramicloadedhumbucking

BridgePickup:Ceramicloadedhumbucking

Page 66: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUP

Peavey® USA Design

Construction: Humbucking

MagnetType: Ceramic 5 magnet

Description: Dual coil, Harmonically positioned, frequency calibrated for more attack and sustain

duringsolo/leadwork.Ceramicloadedforpunchandedgeathighervolumelevelswithextended

presence.Fullypotted.12KDC.Chromeplatedcoverforaddedshieldingaswellas“vintage”ap-

pearance. 4 conductor shielded hookup cable.

NECK PICKUP

Peavey USA Design

Construction: Humbucking

MagnetType: Ceramic 5 bar

Description: Dual Coil. Harmonically positioned, frequency calibrated for neck position of the JF-

1.Vintagestylewindingallowssmoothmids,warmthandmoresustaininsoloworkinneckposition.

Ceramicloadedforaddedpresenceathighervolumelevels.Fullypotted..7.4KDC.Chromeplated

coverforaddedshieldingaswellas“vintage”appearance.4conductorshieldedhookupcable.

Page 67: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

NECK

BRIDGE

SELECTOR POSITION

B NM B NM B NM

JF™-1 PICKUP SWITCHING

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

Peavey Part #00579430 JF-1 Lite CasePeaveyPart#00580070JF-1NylonBag

Page 68: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Raptor® PlusAvailable Finishes:

FEATURES

25.5” scale, 12” radius, 22 frets•

Basswoodbodyconstruction•

Wide top pole piece single coil pickups for bigger string window with more focus•

Fulcrum tremolo bridge•

Peaveysix-in-a-lineheadstockwithergonomictunerplacement,straightstringpull•

Master volume and tone controls•

5-way pickup selector, hum canceling in second and fourth position•

15:1 ratio die cast tuners•

Dual action torsion rod•

Availablefinishes:Black(BLK),Sunburst(SNB),NortheastRed(NER)•

Cherryburst(CHB),Ivory(IVR)

Black

Sunburst

Northeast Red

Cherryburst

Ivory

Page 69: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 22 frets

a.WidthatNut:1.65”(42mm)

b.WidthatLastFret:2.25”(57.5mm)

c.Thicknessat1stFret:.768”(19.5mm)

d.Thicknessat12thFret:.846”(21.5mm)

Radius: 12”

SPECIFICATIONSNeckMaterial:Maple

NeckType:Bolton

Hardware Color: Chrome

BodyWood:Solidbasswood

Fingerboard: Rosewood

Inlays: 6mm white dots

Frets:22-frets2.5mmwidex1.1mmtall

Bridge:FulcrumTremolo

NeckPickup:SingleCoil

Middle Pickup: Single Coil

BridgePickup:DualCoilHumbucker

Page 70: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUP

Peavey® USA Design

Construction:Dualexposedcoil

MagnetType: Ceramic 5 magnet, wide magnetic pole pieces

Description: 11k dc. 4 conductor shielded hookup wire. High output with enhanced presence. Cali-

brated for bridge position and harmonically placed.

NECK PICKUP

Peavey USA Design

Construction: Single coil

MagnetType: Ceramic 5 bar with wide magnetic pole pieces

Description: 7.5k dc. Calibrated for neck position for enhanced clarity and attack for chording as

wellassolowork.Harmonicallyplacedforneckposition.Inductanceadjustedtoretainvintagetone.

MIDDLE PICKUP

Peavey USA Design

Construction: Single coil

MagnetType: Ceramic 5 bar with wide magnetic pole pieces

Description: 9kdc.Calibratedformidpositionforwarmthandclarity.Adjustedinductanceto

retain vintage tone with more sensitive response.

Page 71: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

RAPTOR® PLUS PICKUP SWITCHING

NECK

BRIDGE

MIDDLE

SELECTOR POSITION

B NMBM MN B NMBM MN B NMBM MN B NMBM MN B NMBM MN

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase

PeaveyPart#00722780NylonGuitarBag

Page 72: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Raptor® CustomAvailable Finishes:

FEATURES

25.5” scale, 12” radius, 22 frets•

Solid basswood body construction•

Wide top pole piece single coil pickups for bigger string window with more focus•

VintageStyleSteelFulcrumtremolobridge•

Peaveysix-in-a-lineheadstockwithergonomictunerplacement,straightstringpull•

Master volume and tone controls•

5-way pickup selector, hum canceling in second and fourth position•

15:1 ratio die cast tuners•

Dual action torsion rod•

Availablefinishes:Black(BLK),Silverburst(SLB),NortheastRed(NER),GulfcoastBlue(GCB)•

Gulfcoast Blue

Northeast Red

Silverburst

Black

Peavey’spatentpendingPowerPlateincreasessustain!

Page 73: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 22 frets

a.WidthatNut:1.65”(42mm)

b.WidthatLastFret:2.25”(57.5mm)

c.Thicknessat1stFret:.768”(19.5mm)

d.Thicknessat12thFret:.846”(21.5mm)

Radius: 12”

SPECIFICATIONSNeckMaterial:Maple

NeckType:Bolton

Hardware Color: Chrome

BodyWood:Solidbasswood

Fingerboard: Rosewoodorfinished

Hard Rock Maple

Inlays: 6mm white dots

Frets:22-frets2.5mmwidex1.1mmtall

Bridge:SteelVintageStyleFulcrumTremolo

NeckPickup:SingleCoil

Middle Pickup: Single Coil

BridgePickup:SingleCoil

Page 74: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUP

Peavey® USA Design

Construction: Single coil

MagnetType: Ceramic 5 magnet, wide magnetic pole pieces

Description: 9k dc. 4 conductor shielded hookup wire. High output with enhanced presence. Cali-

brated for bridge position and harmonically placed.

NECK PICKUP

Peavey USA Design

Construction: Single coil

MagnetType: Ceramic 5 bar with wide magnetic pole pieces

Description: 7.5k dc. Calibrated for neck position for enhanced clarity and attack for chording as

wellassolowork.Harmonicallyplacedforneckposition.Inductanceadjustedtoretainvintagetone.

MIDDLE PICKUP

Peavey USA Design

Construction: Single coil

MagnetType: Ceramic 5 bar with wide magnetic pole pieces

Description: 9kdc.Calibratedformidpositionforwarmthandclarity.Adjustedinductanceto

retain vintage tone with more sensitive response.

Page 75: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

RAPTOR® Custom PICKUP SWITCHING

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase

PeaveyPart#00722780NylonGuitarBag

NECK

BRIDGE

MIDDLE

SELECTOR POSITION

B NMBM MN B NMBM MN B NMBM MN B NMBM MN B NMBM MN

Page 76: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Session™AvailableFinishes:MetallicBlue,MetallicRed,Black,VintageTobaccoburst,Cherryburst

FEATURES25.5” scale with 22 nickel silver frets•

Tone chambered, resonant basswood body with integral center section •

Bolt-onCanadianrockmapleneckwithcomfortablesculptedfiveboltattachment•

GenuineRosewoodfingerboard•

Graphite composite topnut for clarity and sustain•

Two premium Peavey USA design Alnico pickups, coil tapped•

15:1 stable post designed die cast Grover machine heads•

Die cast string-through-body bridge with stainless steel saddles, nickel plated•

Recessed volume & tone controls with push/pull coil tap function•

Recessed high quality 3 way pickup selector switch•

Dual action torsion rod•

Availablefinishes:Black(BLK),MetallicBlue(MBL),MetallicRed(MRD),VintageTobaccoburst•

(VTB),Cherryburst(CHB)

Page 77: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 22 frets

a.WidthatNut:1.659”(42mm)

b.WidthatLastFret:2.187”(55.55mm)

c.Thicknessat1stFret:.826”(21mm)

d.Thicknessat12thFret:.886”(22.5mm)

Radius: 9.5” graduated to 15”

SPECIFICATIONSNeckMaterial:CanadianRockMaple

NeckType:Bolton,5boltattachment

Hardware Color: Chrome

BodyWood:Solidbasswood

Fingerboard: Rosewood

Inlays: 2mm white dots

Frets:22-frets2.7mmwidex1.1mmtall

Bridge:String-through

NeckPickup:Humbucking,coiltapped

BridgePickup:Humbucking,coiltapped

Page 78: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUP

Peavey® USA Design

Construction: Dual coil humbucking

MagnetType: Alnico 5 calibrated

Description: 12.5k dc. Harmonically positioned for added attack and bite for solo work. 4 conduc-

torshieldedhookupwire.Nickelplatedcoverforshieldingandvintageappearance.Dual/Singlecoil

Dual/single coil operation via push/pull pot control. Fully shielded control cavity.

NECK PICKUP

Peavey USA Design

Construction: Dual coil humbucking

MagnetType: Alnico 5 calibrated

Description: 7.5k dc. Harmonically positioned for warm yet clear low end at lower volumes and

sweet,singingmids.Alnico5calibratedmagnetdesign.Nickelplatedcoverforvintageappearance

and shielding. 4 conductor shielded hookup cable. Dual/single coil operation via push/pull pot con-

trol. Fully shielded control cavity.

Page 79: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

NECK

BRIDGE

SELECTOR POSITION

B NM B NM B NM

SESSION™ PICKUP SWITCHING

Thank you for purchasing genuine peavey® producTs!

NECK

BRIDGE

SELECTOR POSITION

B NM B NM B NM

NECK

BRIDGE

SELECTOR POSITION

B NM

PULL POT FOR COIL TAP

B NM B NM

AVAILABLE CASES/BAGS

Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase

PeaveyPart#00722780NylonGuitarBag

Page 80: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Riptide™AvailableFinishes:Black,GulfcoastBlue,ClassicWhite,LauderdaleRed

FEATURES25.5” scale with 22 nickel silver frets•

Alder body •

Bolt-onCanadianrockmapleneckwithcomfortablesculptedfiveboltattachment•

GenuineRosewoodorMaplefingerboard•

Graphite composite topnut for clarity and sustain•

Two premium Peavey USA design single coil pickups•

15:1 stable post designed die cast Grover machine heads•

Compensated tele style bridge•

Volumeandtonecontrols•

High quality 3 way pickup selector switch•

Dual action torsion rod•

Availablefinishes:Black(BLK),ClassicWhite(CLW),LauderdaleRed(LDR),GulfcoastBlue(GCB)•

Page 81: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 25.5”, 22 frets

a.WidthatNut:1.654”(42mm)

b.WidthatLastFret:2.2”(56mm)

c.Thicknessat1stFret:..807”(20.5mm)

d.Thicknessat12thFret:..886”(22.5mm)

Radius:13.78”(350mm)

SPECIFICATIONSNeckMaterial:CanadianRockMaple

NeckType:Bolton,5boltattachment

Hardware Color: Chrome

BodyWood:Alder

Fingerboard: Rosewood

Inlays: 2mm dots

Frets:22-frets2.7mmwidex1.1mmtall

Bridge:String-through

NeckPickup:SingleCoil

BridgePickup:SingleCoil

Page 82: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUP

Peavey® USA Design

Construction: Single Coil

MagnetType: Alnico II

Description:7.8kdc.Vintagevoiced,singleconductorvintagewire.

NECK PICKUP

Peavey USA Design

Construction: Single Coil

MagnetType: Alnico II

Description:8.1kdc.Vintagevoiced,singleconductorvintagewire

Page 83: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

RIPTIDE™ PICKUP SWITCHING

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase

PeaveyPart#00722780NylonGuitarBag

NECK

BRIDGE

SELECTOR POSITION

B NM B NM B NM

Page 84: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Power Slide™Available Finishes:

FEATURESRevolutionarynextgenerationslideinstrument,ergonomicallydesignedformaximumplayability•

Patent pending multi-point strap system allows for multiple vertical and horizontal playing styles•

Unique magnet loaded pickup with patented variable coil mode control•

Radical patent pending design provides unprecedented neck access in vertical playing position•

Nutwidth2.2”(54mm)•

.013 - .053 nickel wound strings•

Speciallydesigned“Y”strapincluded•

Steel slide included•

Specially designed padded bag included•

Availablefinishes:Black(BLK),Burgundy(BGD),Ivory(IVR)•

Black

Burgundy

Ivory

Page 85: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

SPECIFICATIONSNeckMaterial:Basswood

NeckType:NeckThroughconstruction

Hardware Color: Chrome

BodyWood:Basswood

Fingerboard:25”scalelength,2Octavefinger-

board graphic, Nutwidth2.2”(54mm)

Frets: 27, printed graphic

Bridge:Magnetloaded,variablecoilmode

PICKUP

Peavey® USA Design

Construction: Hi output Tappable Humbucking, dual coil

MagnetType: Ceramic 5 bar

Description:DualCoil,extendedmagneticwindow,14DCoutput.Peavey’sversatilerotarytone/

coil cut tone pot with treble bleed circuit allows clarity in both single coil and humbucking modes.

Fullyshielded4conductorcableandchromeplated“exposedcoil”coveraffordsquietoperationand

allowsmaximumadjustability.

Thank you for purchasing genuine peavey® producTs!

Page 86: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Devin Townsend Signature PXD Vicious 7 String Baritone

FEATURES

24 jumbo frets•28” scale•14 degree headstock pitch•Rock Maple Neck Through Body construction•Mahogany body wings w/ maple cap•Ebony fretboard•Striking2tonegunmetalgray/blackfinish•Phosphorescent side markers•EMG 81-7 Bridge Pickup•EMG SA-7 Single Coil Neck Pickup•Single Volume Control with pearl inlay•3 way pickup selector toggle•Special Devin Townsend 12th fret logo•Custom designed locking machine heads•Heavydutyfixedbridge-stringthroughbody•Black TUSQ® topnut•Graphite reinforced neck•Dual action torsion rod•Hardshell Case included•

Page 87: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONS

Scale/Length: 28”, 24 frets

a. Width at Nut: 48mm (1.89”)

b. Width at Last Fret: 60.96mm (2.4”)

c. Thickness at 1st Fret: 20.75mm (.817”)

d. Thickness at 12th Fret: 23.469mm (.924”)

Radius: 14”

SPECIFICATIONS

Neck Material: Hard Rock Maple

Neck Type: Neck Through Body

Hardware Color: Black

Body Wings: Mahogany

Fingerboard: Ebony

Inlays: 12th fret Devin Townsend signature logo

Frets: 18% nickel/silver alloy, 2.7mm wide, 1.39mm tall

Bridge: Heavy duty fixed, string through body

Neck Pickup: EMG SA-7 Single Coil active 7

Bridge Pickup: EMG 81-7 Active

*For full specs and information about the EMG pickups refer to www.emginc.com

Page 88: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

PICKUP SWITCHING

Thank you for purchasing genuine peavey producTs!

NECK

BRIDGE

SELECTOR POSITION

B NM B NM B NM

Page 89: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model:RudySarzoSignatureCirrus®Bass

FEATURES35” scale•Maplebodywingswithflamemapletop•Maple neck with walnut stringers•Snakeeyefingerboardinlays•PauFerrofingerboard•24 Frets•2wayfullyadjustabletorsionrod•String-thru body or top load •String-thru ferrules•19:1 ratio tuning machines•2Peavey®USAdesignVFLactivehumbuckingpickups•Active preamp•18 volt electronics•Volume,pickupblend,bass,midandtreblecontrolswith10dBboost/cut•Satin gold hardware•Milled one piece bridge•Gig bag included•

Peavey’spatentpendingPowerPlateincreasessustainandeliminatesdeadspots!

Page 90: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 35”, 24 frets

a.WidthatNut:1.50”(38.1m)

b.WidthatLastFret:2.50”(63.5mm)

c.Thicknessat1stFret:.825”(20.96mm)

d.Thicknessat12thFret:.900”(22.86mm)

Radius: 12”

SPECIFICATIONSNeckMaterial:MaplewithwalnutStringers

NeckType:Neck-throughthebodydesign

Hardware Color: Satin gold

BodyWood:Maple

Fingerboard: Rosewood

Inlays:AbalonePearlSnakeEye

Frets: 24-frets2.7mmwidex1.1mmtall,18%nickelsilver

Bridge:Milled one piece bridge

NeckPickup:VFLInternallyactive

BridgePickup:VFLInternallyactive

Page 91: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUPPeavey® USA Design VFL Humbucking

Construction:Internallyactive,lowimpedance,extendedfrequencyresponse

MagnetType:Ceramic,extendedmagneticwindow

Description: Internally active, 18 volt powered, frequency balanced for bridge position. Low im-

pedancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesign

enhances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string

vibrationandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.

NECK PICKUP

Peavey USA Design VFL Humbucking

Construction:Internallyactive,lowimpedance,extendedfrequencyresponse

MagnetType:Ceramic,extendedmagneticwindow

Description: Internally active, 18 volt powered, frequency balanced for neck position. Low imped-

ancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesignen-

hances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string vibra-

tionandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.

Page 92: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

SPECIAL FEATURES

MadetoRudySarzo’sexactspecifications.BodywingsmademapleandcappedwithAAAquiltma-

ple.3bandactiveEQallowsforinfinitetonalcombinationssuitedforallstylesofmusic.VFLinter-

nallyactivepickupsrespondtothedynamicsoftheplayerfromJazztoHeavyMetal,fromfingerstyle

playingtothehardestpickstyles.18voltpoweredelectronicsoffercleanestoperationandextended

battery life for trouble free operation.

HARDWARE

Satin Gold

Tuners: 19-1 ratio die cast, enclosed machine heads, 4 in line.

Bridge: Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.

Controls: Volume,pickupblend,bass,midandtreblecontrolswith10dBboost/cut.Knobsarema-

chined brass, black chrome plated with elastomer grip rings.

Thank you for purchasing genuine peavey® producTs!

Page 93: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model:Millennium®4Bass

Available Finishes:

FEATURES34” scale•4-string•Hard rock maple neck with rosewood fretboard•CompositeNut•2wayfullyadjustabletorsionrod•Basswoodbodywithhighlyfiguredquiltmapletopontransmodels•String through body or top load feature•19:1 ratio tuning machines•Two straight single coil pickups, hum canceling when used together•Ergonomicbodydesignwithwaistcutawayforsuperiorbalanceandcomfort•2Volume,1mastertonecontrols•Availablefinishes:Black(BLK),Sunburst(SNB),TigerEye(TGE),TransparentBlue(TBL)•

Black Sunburst Tiger Eye Transparent Blue

Page 94: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 34”, 21 frets

a.WidthatNut:1.5”(38.1mm)

b.WidthatLastFret:2.5”(63.5mm)

c.Thicknessat1stFret:.825”(20.96mm)

d.Thicknessat12thFret:.903”(22.94mm)

Radius: 12”

SPECIFICATIONSNeckMaterial:HardRockmaple

NeckType:Bolton,5boltdesign,extendedaccessheel

HardwareColor:Black

BodyWood:Basswood

Fingerboard: Rosewood

Inlays: Acrylic Dots

Frets: 21-frets2.7mmwidex1.1mmtall,nickelsilver

Bridge:Die cast, string through body or rear load option

NeckPickup:Ceramicloadedsinglecoil

BridgePickup:Ceramicloadedsinglecoil

Page 95: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUPPeavey® USA Design

Construction: Single coil, steel polepiece, 9k dc.

MagnetType: Ceramic 5 bar.

Description: Medium output, frequency tailored for bridge position. Individual polepiece for each

stringtomaximizeoutput,harmonicallypositionedwith4screwheightadjustment.Fullyshielded

hookup wire.

NECK PICKUP

Peavey USA Design

Construction: Single coil, steel polepiece, 8k dc.

MagnetType: Ceramic 5 bar.

Description: Medium output, frequency tailored for neck position. Harmonically positioned to en-

hance low end and retain presence and clarity. Fully shielded hookup wire.

HARDWARE

Blackchromeplated

Tuners: 19-1 ratio die cast, enclosed machine heads, 4 in line.

Bridge:Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.

Controls: 2 volume, 1 master tone, Die cast knobs.

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase

PeaveyPart#00722790NylonBassBag

Page 96: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model:Millennium®4ACBass

Available Finishes:

FEATURES34” scale•Five bolt neck attachment with hard rock maple neck•Basswoodbody,rosewoodfingerboard,highlyfiguredquiltedmaplecapontransmodels•21 Frets•19-1 mini die cast enclosed machine heads•2wayfullyadjustabletorsionrod•Individualfinger-stylebridge•String-thru body or top load •String-thru ferrules•19:1 ratio tuning machines•2Peavey®USAdesignVFLactivehumbuckingpickups•Active preamp•18 volt electronics•Volume,pickupblend,bass,midandtreblecontrolswith12dBboost/cut•Satin black hardware•Availablefinishes:Black(BLK),TigerEye(TGE)•

Black Tiger Eye

Page 97: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 34”, 21 frets

a.WidthatNut:1.50”(38.1m)

b.WidthatLastFret:2.50”(63.5mm)

c.Thicknessat1stFret:.825”(20.96mm)

d.Thicknessat12thFret:.900”(22.86mm)

Radius: 12”

SPECIFICATIONSNeckMaterial:HardRockmaple

NeckType:Bolton,5boltdesign,extendedaccessheel

HardwareColor:Black

BodyWood:Basswood

Fingerboard: Rosewood

Inlays: Acrylic Dots

Frets: 21-frets2.7mmwidex1.1mmtall,18%nickelsilver

Bridge:Diecast,individualfingerstyle.3way

adjustable,string-thrubodyortopload

NeckPickup:VFLInternallyactive

BridgePickup:VFLInternallyactive

Page 98: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUPPeavey® USA Design VFL Humbucking

Construction:Internallyactive,lowimpedance,extendedfrequencyresponse

MagnetType:Ceramic,extendedmagneticwindow

Description: Internally active, 18 volt powered, frequency balanced for bridge position. Low im-

pedancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesign

enhances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string

vibrationandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.

NECK PICKUP

Peavey USA Design VFL Humbucking

Construction:Internallyactive,lowimpedance,extendedfrequencyresponse

MagnetType:Ceramic,extendedmagneticwindow

Description: Internally active, 18 volt powered, frequency balanced for neck position. Low imped-

ancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesignen-

hances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string vibra-

tionandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.

Page 99: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

SPECIAL FEATURES

Ergonomicbodydesignwithwaistcutawayforimprovedbalanceandcomfort.3bandactiveEQ

allowsforinfinitetonalcombinationssuitedforallstylesofmusic.VFLinternallyactivepickupsre-

spondtothedynamicsoftheplayerfromJazztoHeavyMetal,fromfingerstyleplayingtothehardest

pickstyles.18voltpoweredelectronicsoffercleanestoperationandextendedbatterylifefortrouble

free operation.

HARDWARE

Blackchromeplated

Tuners: 19-1 ratio die cast, enclosed machine heads, 4 in line.

Bridge: Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.

Controls: MasterVolume,bass,mid,treble&pickupblendcontrols.Knobsaremachinedbrass,black

chrome plated with elastomer grip rings.

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase

PeaveyPart#00722790NylonBassBag

Page 100: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model:Millennium®5Bass

Available Finishes:

FEATURES34” scale•5-string•15” fretboard radius•Hard rock maple neck with rosewood fretboard•CompositeNut•2wayfullyadjustabletorsionrod•Basswoodbodywithhighlyfiguredquiltmapletopontransmodels•String through body or top load feature•19:1 ratio tuning machines•Two straight single coil pickups, hum canceling when used together•Ergonomicbodydesignwithwaistcutawayforsuperiorbalanceandcomfort•Availablefinishes:Black(BLK),Sunburst(SNB),TigerEye(TGE),TransparentBlue(TBL)•

Black Sunburst Tiger Eye Transparent Blue

Page 101: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 34”, 21 frets

a.WidthatNut:1.76”(44.7mm)

b.WidthatLastFret:2.675”(67.95mm)

c.Thicknessat1stFret:.805”(20.46mm)

d.Thicknessat12thFret:.905”(23mm)

Radius: 15.75”

SPECIFICATIONS

NeckMaterial:HardRockmaple

NeckType:Bolton,5boltdesign,extendedaccessheel

HardwareColor:Black

BodyWood:Basswood

Fingerboard: Rosewood

Inlays: Acrylic Dots

Frets: 21-frets2.7mmwidex1.1mmtall,nickelsilver

Bridge:Die cast, string through body or rear load option

NeckPickup:Ceramicloadedsinglecoil

BridgePickup:Ceramicloadedsinglecoil

Page 102: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUPPeavey® USA Design

Construction: Single coil, steel polepiece, 9k dc.

MagnetType: Ceramic 5 bar.

Description: Medium output, frequency tailored for bridge position. Individual polepiece for each

stringtomaximizeoutput,harmonicallypositionedwith4screwheightadjustment.Fullyshielded

hookup wire.

NECK PICKUP

Peavey USA Design

Construction: Single coil, steel polepiece, 8k dc.

MagnetType: Ceramic 5 bar.

Description: Medium output, frequency tailored for neck position. Harmonically positioned to en-

hance low end and retain presence and clarity. Fully shielded hookup wire.

HARDWARE

Blackchromeplated.

Tuners: 19-1 ratio die cast, enclosed machine heads, 3+2 arrangement.

Bridge:Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.

Controls: 2 volume, 1 master tone, Die cast knobs.

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase

PeaveyPart#00722790NylonBassBag

Page 103: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model:Millennium®5ACBass

Available Finishes:

FEATURES34” scale•Five bolt neck attachment with hard rock maple neck•Basswoodbody,rosewoodfingerboard,highlyfiguredquiltedmaplecapontransmodels•21 Frets•15” fretboard radius•19-1 mini die cast enclosed machine heads•2wayfullyadjustabletorsionrod•Individualfinger-stylebridge•String-thru body or top load •String-thru ferrules•19:1 ratio tuning machines•2Peavey®USAdesignVFLactivehumbuckingpickups•Active preamp•18 volt electronics•Volume,pickupblend,bass,midandtreblecontrolswith12dBboost/cut•Satin black hardware•Availablefinishes:• Black(BLK),TigerEye(TGE)

Black Tiger Eye

Page 104: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

SPECIFICATIONSNeckMaterial:HardRockmaple

NeckType:Bolton,5boltdesign,extendedaccessheel

HardwareColor:Black

BodyWood:Basswood

Fingerboard: Rosewood

Inlays: Acrylic Dots

Frets: 21-frets2.7mmwidex1.1mmtall,18%nickelsilver

Bridge:Diecast,individualfingerstyle.3way

adjustable,string-thrubodyortopload

NeckPickup:VFLInternallyactive

BridgePickup:VFLInternallyactive

NECK DIMENSIONSScale/Length: 34”, 21 frets

a.WidthatNut:1.76”(44.7mm)

b.WidthatLastFret:2.675”(67.95mm)

c.Thicknessat1stFret:.805”(20.46mm)

d.Thicknessat12thFret:.905”(23mm)

Radius: 15.75”

Page 105: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUPPeavey® USA Design VFL Humbucking

Construction:Internallyactive,lowimpedance,extendedfrequencyresponse

MagnetType:Ceramic,extendedmagneticwindow

Description: Internally active, 18 volt powered, frequency balanced for bridge position. Low im-

pedancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesign

enhances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string

vibrationandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.

NECK PICKUP

Peavey USA Design VFL Humbucking

Construction:Internallyactive,lowimpedance,extendedfrequencyresponse

MagnetType:Ceramic,extendedmagneticwindow

Description: Internally active, 18 volt powered, frequency balanced for neck position. Low imped-

ancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesignen-

hances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string vibra-

tionandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.

Page 106: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

SPECIAL FEATURES

Ergonomicbodydesignwithwaistcutawayforimprovedbalanceandcomfort.3bandactiveEQ

allowsforinfinitetonalcombinationssuitedforallstylesofmusic.VFLinternallyactivepickupsre-

spondtothedynamicsoftheplayerfromJazztoHeavyMetal,fromfingerstyleplayingtothehardest

pickstyles.18voltpoweredelectronicsoffercleanestoperationandextendedbatterylifefortrouble

free operation.

HARDWARE

Blackchromeplated

Tuners: 19-1 ratio die cast, enclosed machine heads, 3+2 arrangement.

Bridge:Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.

Controls: MasterVolume,bass,mid,treble&pickupblendcontrols.Knobsaremachinedbrass,black

chrome plated with elastomer grip rings.

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase

PeaveyPart#00722790NylonBassBag

Page 107: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Grind™ 4 string bassAvailable Finishes:

FEATURES35 inch scale•4-string•24 frets•Passive humbucking pickups•Mahogany neck with maple stringers•19:1 ratio tuning machines•Mahogany body wings•Dual action torsion rod•Neck-through-bodydesign•Availablefinishes:Black(BLK),Natural(NAT)•

Natural

Gloss Black

Page 108: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 35”, 24 frets

a.WidthatNut:1.57”(40mm)

b.WidthatLastFret:2.36”(60mm)

c.Thicknessat1stFret:.807”(20.5mm)

d.Thicknessat12thFret:.903”(22.94mm)

Radius: 12”

SPECIFICATIONSNeckMaterial:Mahogany with Maple Stringers

NeckType:Neckthroughthebody

HardwareColor:Black

BodyWood:Mahogany wings

Fingerboard: Rosewood

Inlays: Acrylic Dots

Frets:24NickelSilver,1.3mmtall

Bridge:Die cast, string through body or rear load option

NeckPickup:Ceramic loaded passive humbucking

BridgePickup:Ceramic loaded passive humbucking

Page 109: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUPPeavey® USA Design

Construction: Humbucking

MagnetType: Ceramic 5 bar.

Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for enhanced high

end and attack. 15.5k DC.

NECK PICKUP

Peavey USA Design

Construction: Humbucking

MagnetType: Ceramic 5 bar

Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for neck. 13.5k DC

HARDWARE

Blackchromeplated

Tuners: 19-1 ratio die cast, enclosed machine heads, 2+2 arrangement.

Bridge:Heavydutydiecast,3wayadjustablesaddles,stringthroughbody.

Controls: 2 volume, 2 tone, Die cast knobs.

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase

PeaveyPart#00722790NylonBassBag

Page 110: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model:Grind™Bass5String Available Finishes:

FEATURES35 inch scale•

5-string•

24 frets•

Passive humbucking pickups•

19:1 ratio tuning machines•

Mahogany• neck with maple stringers

Mahogany• body wings

Dual action torsion rod•

Neck-through-bodydesign•

Availablefinishes:• Black(BLK),Natural(NAT)

Natural

Gloss Black

Page 111: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 35”, 24 frets

a.WidthatNut:1.76”(44.7mm)

b.WidthatLastFret:2.76”(70mm)

c.Thicknessat1stFret:.805”(20.46mm)

d.Thicknessat12thFret:.905”(23mm)

Radius: 15”

SPECIFICATIONSNeckMaterial:Mahogany with Maple stringers

NeckType:Neckthroughthebody

HardwareColor:Black

BodyWood:Mahogany wings

Fingerboard: Rosewood

Inlays: Acrylic Dots

Frets: 24-frets 1.3mm tall, nickel silver

Bridge:Die cast, string through body or rear load option

NeckPickup:Ceramicloadedpassivehumbucking

BridgePickup:Ceramicloadedpassivehumbucking

Page 112: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUP

Peavey® USA Design

Construction: Humbucking

MagnetType: Ceramic 5 bar

Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for bridge position,

extendedmagneticwindowforlowBstringresponseandattack,16kDC.

NECK PICKUP

Peavey USA Design

Construction: Humbucking

MagnetType: Ceramic 5 bar

Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for neck position,

extendedmagneticwindowforlowBstringresponse,13.5kDC.

HARDWARE

Blackchromeplated

Tuners: 19-1 ratio die cast, enclosed machine heads, 3+2 arrangement.

Bridge:Heavydutydiecast,3wayadjustablesaddles,stringthroughbody.

Controls: 2 volume, 2 tone, Die cast knobs.

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase

PeaveyPart#00722790NylonBassBag

Page 113: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model: Grind™ 6 string bassAvailable Finishes:

FEATURES35 inch scale•

24 frets•

6-string•

19:1 ratio tuning machines•

Passive humbucking pickups•

Mahogany• neck with maple stringers

Mahogany• body wings

Dual action torsion rod•

Neck-through-bodydesign•

Availablefinishes:• Black(BLK),Natural(NAT)

Natural

Gloss Black

Page 114: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 35”, 24 frets

a.WidthatNut:2.13”(54mm)

b.WidthatLastFret:3.27”(83mm)

c.Thicknessat1stFret:.83”(21mm)

d.Thicknessat12thFret:.91”(23mm)

Radius: 19”

SPECIFICATIONSNeckMaterial:Mahogany with Maple stingers

NeckType:Neckthroughthebodydesign

HardwareColor:Black

BodyWood:Mahogany wings

Fingerboard: Rosewood

Inlays: Acrylic Dots

Frets: 24-frets, 1.3 mm tall, nickel silver

Bridge:Die cast, string through body or rear load option

NeckPickup:Ceramic loaded passive humbucking

BridgePickup:Ceramic loaded passive humbucking

Page 115: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUPPeavey® USA Design

Construction: Humbucking

MagnetType: Ceramic 5 bar

Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for bridge position,

extendedmagneticwindowforimprovedBandCstringresponse,17kDC.

NECK PICKUP

Peavey USA Design

Construction: Humbucking

MagnetType: Ceramic 5 bar

Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for neck position,

extendedmagneticwindowforimprovedBandCstringresponse,16kDC.

HARDWARE

Blackchromeplated

Tuners: 19-1 ratio die cast, enclosed machine heads, 3+3 arrangement

Bridge:Heavydutydiecast,3wayadjustablesaddles,Stringthroughbody.

Controls: 2 volume, 2 tone, Die cast knobs.

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase

PeaveyPart#00722790NylonBassBag

Page 116: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

Model:Milestone®BassAvailable Finishes:

FEATURES34 inch scale•Maple neck with rosewood fretboard•Dual-expandingtrussrod•20 frets•12 inch radius•Balanced,comfortablebodystylingwithsculptedfrontandback,improvedaccessneckjoint•One split and one straight single coil pickups•ExclusivePowerPlateincreasessustainandeliminatesdeadspots•Stamped steel bridge•Chrome hardware•19:1 ratio tuning machines•Two volume, master tone control•Case not included•Availablefinishes:Black(BLK),GulfcoastBlue(GCB),Ivory(IVR),VintageBurst(VTB)•

Black

Vintageburst

Gulfcoast Blue

Ivory

Peavey’spatentpendingPowerPlateincreasessustainandeliminatesdeadspots!

Page 117: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

A

C

D

B

RADIUS

NECK DIMENSIONSScale/Length: 34”, 20 frets

a.WidthatNut:1.5”(38.1mm)

b.WidthatLastFret:2.5”(63.5mm)

c.Thicknessat1stFret:.825”(20.96mm)

d.Thicknessat12thFret:.903”(22.94mm)

Radius: 12”

SPECIFICATIONSNeckMaterial:Maple

NeckType:Bolton

Hardware Color: Chrome

BodyWood:Basswood

Fingerboard: Rosewood

Inlays: Acrylic Dots

Frets:20-frets2.7mmwidex1.1mmtall,nickelsilver

Bridge:StampedSteel

NeckPickup:Ceramicloadedsinglecoil

BridgePickup:Ceramicloadedsinglecoil

Page 118: Model: Composite Acoustics™ CargoFEATURES • All Composite Acoustically Tailored construction for ultimate tone, durability and versatility • Rigid one-piece neck/body construction

BRIDGE PICKUPPeavey® USA Design

Construction: Single coil, steel polepiece, 9k dc.

MagnetType: Ceramic 5 bar.

Description: Medium output, frequency tailored for bridge position. Individual polepiece for each

stringtomaximizeoutput,harmonicallypositionedwith4screwheightadjustment.Fullyshielded

hookup wire.

NECK PICKUPPeavey USA Design

Construction: Split single coil, steel polepiece, 8k dc.

MagnetType: Ceramic 5 bar.

Description: Medium output, frequency tailored for neck position. Harmonically positioned to en-

hance low end and retain presence and clarity. Fully shielded hookup wire.

HARDWARE

Chromeplated

Tuners: 19-1 ratio die cast, enclosed machine heads, 4 in line.

Bridge:Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.

Controls: 2 volume, 1 master tone, Die cast knobs.

Thank you for purchasing genuine peavey® producTs!

AVAILABLE CASES/BAGS

PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase

PeaveyPart#00722790NylonBassBag