2
1 Guide to Assembly & Usage Shelving is safe when used responsibly. If in doubt, contact the supplier. 06/17 Important: This unit is designed to link to another shelving unit. Additional upright kit is required if using as a free-standing unit. If you have any missing components please take note of the part name and contact your supplier COMPONENT CHECK LIST Component Quantity A Footplate 2 B Upright 4 C Side Beam 8 D Front/Back Beam 7 E Upright Joiner 4 F Shelf Support 3 G Chipboard Shelf 3 Modular Garage Shelving - 200SB Information If in doubt, contact the supplier Read this guide thoroughly before commencing assembly and retain for future reference Before commencing assembly, unpack carefully and check that all components ordered are included Tools – Large rubber mallet, flat blade screwdriver and 10mm spanner Assess for floor fixing. Tall narrow bays may require this to ensure stability We recommend products over 2000mm high are fixed to the wall where possible Dispose of packaging materials responsibly Build on a suitable level floor, which is strong enough to support the load and allow adequate working space Warning Rules for the safe use of shelving: Assembly should be undertaken by a minimum of two competent people Never climb on the structure or stand on the shelving Do not lean or support ladders, steps, or other objects against shelving Ensure these instructions are retained for reference and that users are aware of the rules for safe use Take care during assembly and in use, particularly when lifting or stretching & when using tools Wear appropriate safety clothing – protective gloves and footwear are recommended Caution During assembly, ensure to: Do not use in damp or wet conditions Load heavy items on the lower shelves & lighter items on the higher shelves Always use safety steps to reach high shelves Ensure that the maximum load carrying capacities are not exceeded Please refer to the loading information supplied for details This product is designed for hand loading only Loading information Modular Garage Shelving - 200SB For any other layouts, please refer to your supplier for detailed loading capacities Shelf load capacities Maximum permitted shelf capacities are based on UDL . Please note that the bay capacity may limit the maximum load per shelf: WE STRONGLY RECOMMEND THIS PRODUCT IS FIXED TO A SOLID WALL FOR MAXIMUM STABILITY. OPTIONAL WALL BRACKETS ARE AVAILABLE ON REQUEST. UDL = Uniformly Distributed Load 200SB Shelf width mm Load capacity per shelf 700 200kg Maximum load per bay 200SB Up to 1930mm high 600kg C A F B E D

Modular Garage Shelving - 200SB · 2017. 7. 27. · Modular Garage Shelving - 200SB Information If in doubt, contact the supplier Wear appropriate clothing, protective gloves and

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Modular Garage Shelving - 200SB · 2017. 7. 27. · Modular Garage Shelving - 200SB Information If in doubt, contact the supplier Wear appropriate clothing, protective gloves and

1

Guide to Assembly & Usage

Shelving is safe when used responsibly. If in doubt, contact the supplier.

06/17

Important:This unit is designed to link to another shelving unit. Additional upright kit is required if using as a free-standing unit.

If you have any missing components please take note of the part name and contact your supplier

COMPONENT CHECK LIST

Component Quantity

A Footplate2

B Upright 4

C Side Beam 8

D Front/Back Beam7

E Upright Joiner 4

F Shelf Support3

G Chipboard Shelf3

Modular Garage Shelving - 200SBInformationIf in doubt, contact the supplier

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Read this guide thoroughly before commencing assembly and retain for future reference

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Before commencing assembly, unpack carefully and check that all components ordered are included

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Tools – Large rubber mallet, flat bladescrewdriver and 10mm spanner

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Assess for floor fixing. Tall narrow bays may require this to ensure stability

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

We recommend products over 2000mm high are fixed to the wall where possible

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Dispose of packaging materials responsibly

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Build on a suitable level floor, which is strong enough to support the load and allow adequate working space

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

WarningRules for the safe use of shelving:

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Assembly should be undertaken by a minimum of two competent people

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Never climb on the structure or stand on the shelving

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Do not lean or support ladders, steps, or other objects against shelving

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Ensure these instructions are retained for reference and that users are aware of the rules for safe use

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Take care during assembly and in use, particularly when lifting or stretching & when using tools

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Wear appropriate safety clothing – protective gloves and footwear are recommended

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

CautionDuring assembly, ensure to:

Do not use in damp or wet conditions

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Load heavy items on the lower shelves & lighter items on the higher shelves

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Always use safety steps to reach high shelves

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Ensure that the maximum load carrying capacities are not exceeded

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

Please refer to the loading information supplied for details

Wear appropriate clothing, protective gloves and footwear are recommended

If in doubt pleasecontact yoursupplier

Please read these instructions

Inspect all packagesfor damage and checkthat all the components orderedare included

Assembly should be undertakenby at least 2 competent persons

Tools required

We recommendthis product is�xed to the �oor

Caution! During assembly

Take care when handling heavy objects

Build on a suitable level �oor surface

Allow adequate working space and be aware of othersworking around you

Dispose of packagingmaterials responsibly

Warning

Never climb on the structure

Do no lean ladders, steps or other objects against the shelving

Always use safetysteps to reach highshelves

Load heavy itemson the lower shelves

This product is designed for hand loading only

Do not use in dampor wet environments

Ensure that maximumload carrying capacitiesare not exceeded

Please referto the loadingchart suppliedfor details

This product is designed for hand loading only

Loading information

Modular Garage Shelving - 200SBFor any other layouts, please refer to your supplier for detailed loading capacities

Shelf load capacitiesMaximum permitted shelf capacities are based on UDL†. Please note that the bay capacity may limit the maximum load per shelf:

WE STRONGLY RECOMMEND THIS PRODUCT IS FIXED TO A SOLID WALL FOR MAXIMUM STABILITY. OPTIONAL WALL BRACKETS ARE AVAILABLE ON REQUEST.†UDL = Uniformly Distributed Load

200SB

Shelf width mm Load capacity per shelf

700 200kg

Maximum load per bay 200SB

Up to 1930mm high 600kg

C

A

F

B

E

D

Page 2: Modular Garage Shelving - 200SB · 2017. 7. 27. · Modular Garage Shelving - 200SB Information If in doubt, contact the supplier Wear appropriate clothing, protective gloves and

2 Note: Illustrations not to scale

06/17

1 2 3

4 5 6

Fix metal footplates A to both uprights B by locating stud on tab into lowest keyhole and pushing down

Insert a short side beam C into lowest keyholes on side of upright B . Tap to secure with mallet. Repeat on second upright

Add further side beams C to create a frame. If using upright set (200SU), repeat steps 1-3 to create second frame and join both frames with front and back beams D

If joining to an existing unit, add short beams C to side of unit then link to frame with front and back beams D

Bend tabs on shelf support beams E to a right angle by pushing down on floor and slide into slots inside front and back beams D

Then fold tabs back with a screwdriver to prevent the supports from coming loose. Repeat for additional levels

7 8 9Fit a pair of joiners E into top 2 keyholes in both sides of each upright B . Tap into place ensuring they are the correct way up

Take one half upright B and place over the joiners E so the studs fit in the lowest keyholes. Tap with a mallet until the two uprights are touching

Add remaining uprights B then join with side C and front beams D . Add remaining shelf supports as steps 5-6

10 11 12Place chipboard shelves G onto each beam level ensuring they sit inside the grooves on each beam

The unit is now complete and can be positioned ready for use. Place on a solid, load bearing floor and check level

For maximum stability, we recommend using two wall brackets and securing to a solid wall at the top of unit as shown

F

Tip: Check beam is correct way up and fitted to short side of upright as shown

D

Important: Fit back beam to long face of upright with side beams on inside of frames

C

D

B

A

Tip: Ensure upright is correct way up as shown

D

D

F

F

Fit upright joiners this way up

E

E

C

C

B

Assembly – 200SB