Monthly Notifications Register - 31.45.242.21831.45.242.218/pdf/MNR/201007CENmnr.pdf · Title : Eurocode - Basis of structural design - Part 1: ... This standard supplements series

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2010-07-01 to 2010-07-31

Register issued on : 2010-08-02

A list of subsectors can be found at the end of this document.




Sector B : BUILDING AND CONSTRUCTION


Page 3Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 03100749/0001 Project EstablishedICS :National Ref : 03100749Title : Bridges for fire hoses - Part 1: Bridges of rubber for fire hoses

Relatedness :National : New

Subsector : B01 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 03100750/0001 Project EstablishedICS :National Ref : 03100750Title : Fire fighting equipment - Trough


Subsector : B01 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 03100751/0001 Project EstablishedICS :National Ref : 03100751Title : Boxes for fire equipment - Boxes made of wood, light metal and light metal/wood


Subsector : B01 Registration Date : 2010-07-08Organization : NENCountry : NetherlandsProject ID : 50001580/0001 Project EstablishedICS : 13.220.20National Ref : NPR 6095-1:2010 Concept nlTitle : Smoke and heat control systems - Part 1: Guidelines on design and installation of

smoke and heat exhaust installationsScope : In this code of practice design and assessment guidelines forinstallation technical facilities

of smoke and heat exhaust ventilation systems, are given. The requirements for the assesment of smoke and heat exhaust ventilation installations are given in the Dutch standard NEN 6093:1995. This code of practice deals with mechanical as well as natural smoke and heat exhaust ventilation systems.


** End of Subsector **

Page 4Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023334/0001 Project EstablishedICS : 91.010.30National Ref : ÖNORM B 1990-1Title : Eurocode - Basis of structural design - Part 1: Building construction - National

specifications concerning ÖNORM EN 1990Scope : This Austrian Standard specifies national parameters relating to ÖNORM EN 1990 Annex A1

"Application for buildings" and shall be applied jointly with ÖNORM EN 1990.


Subsector : B02 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023335/0001 Project EstablishedICS : 91.010.30National Ref : ÖNORM B 1991-1-5Title : Eurocode 1 - Actions on structures - Part 1-5: General actions - Thermal actions -

National specifications concerning ÖNORM EN 1991-1-5Scope : This Austrian Standard specifies national parameters to ÖNORM EN 1991-1-5 and shall be

applied jointly with ÖNORM EN 1991-1-5 in Austria. EN 1991-1-5 gives principles and rules for calculating thermal actions on buildings, bridges and other structures including their structural elements. Principles needed for cladding and other appendages of buildings are also provided. This Part describes the changes in the temperature of structural elements. Characteristic values of thermal actions are presented for use in the design of structures which are exposed to daily and seasonal climatic changes. Structures not so exposed may not need to be considered for thermal actions. Structures in which thermal actions are mainly a function of their use (e.g. cooling towers, silos, tanks, warm and cold storage facilities, hot and cold services etc) are treated as well.


Subsector : B02 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023336/0001 Project EstablishedICS : 93.040National Ref : ÖNORM B 4021Title : Equipment for bridge bearings - Requirements, manufacturing and production controlScope : In this standard all specific requirements concerning equipment of bridge bearings are

stated. This standard supplements series ÖNORM EN 1337, where general rules for bearings are given. This standard is also valid for bridge bearings which are covered by other technical specifications.


Page 5

Subsector : B02 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023339/0001 Project EstablishedICS : 01.040.91, 91.060.40National Ref : ÖNORM B 8200Title : Chimneys - Terms and definitionsScope : This Austrian Standard specifies terms and definitions of building parts, which act for

combustion gases as well as for the supply or exhaust of air. This standard does not reply to horizontal combustion air without redirection to the outside of gas heating appliances at the exterior wall.


Subsector : B02 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023340/0001 Project EstablishedICS : 91.060.40National Ref : ÖNORM B 8205Title : Chimneys - Planning, execution and maintenanceScope : This Austrian Standard shall be applied for planing and execution of connecting pipes and

chimneys for the exit of combustion gases of heating appliances which operates with solid, liquid or gas fuels as well as e.g. for the exit of combustion gases from heat pumps.


Subsector : B02 Registration Date : 2010-07-22Organization : MSZT Draft Issue Date : 2010-06-29Country : HungaryProject ID : 34811401/0001 Project EstablishedICS : 91.060.40National Ref :Title : Design, installation and inspection of chimneys

Relatedness :National : REV/AMD MSZ 845

Subsector : B02 Registration Date : 2010-07-22Organization : UNICountry : ItalyProject ID : 73032420/0001 Project EstablishedICS : 53.080National Ref : U73032420Title : Steel static storage systems - Cantilever racks - Principles for structural designScope : This standard provides calculation methods for the design of steel cantilever racking.

Technical requirements, particularly referred to unit load types, installation conditions, allowable deflections are also defined.

Relatedness :

Page 6

National : New


Subsector B04: CEMENT

Subsector : B04 Registration Date : 2010-07-29Organization : AENORCountry : SpainProject ID : P0036118/0001 Project EstablishedICS :National Ref : PNE 80220Title : Cement test methods. Chemical analysis. Moisture determination.Scope : This standard defines a method for the moisture determination in common cements and

cements with special characteristics.

Relatedness :National : REV/AMD UNE 80220:2000

Subsector : B04 Registration Date : 2010-07-29Organization : AENORCountry : SpainProject ID : P0036120/0001 Project EstablishedICS :National Ref : PNE 80402/1MTitle : Cement. Delivery conditions.Scope : This project modifies the published standard UNE 80402 with regard the tolerances at

delivery of the bags (when cement is delivered in bags).



Subsector B05: FIRE TESTS

Subsector : B05 Registration Date : 2010-07-23Organization : UNMZ Draft Issue Date : 2010-09-01Country : Czech Republic Latest Date for Comments : 2010-11-30Project ID : 73008610/0001 Draft for public enquiryICS :National Ref :Title : Fire protection of buildings - Assembly roomsScope : The aim of the revision is unification of contemporary legislation and related Czech

Standards. Use of new information for fire safety engineering of buildings.

Relatedness :National : REV/AMD CSN 73 0831 (2001)

Page 7

Subsector : B05 Registration Date : 2010-07-23Organization : UNMZ Draft Issue Date : 2010-07-01Country : Czech Republic Latest Date for Comments : 2010-09-30Project ID : 73008710/0001 Draft for public enquiryICS :National Ref :Title : Fire pretection of buildings - Buildings for dwelling and lodgingScope : The aim of the revision is unification of contemporary legislation and related Czech



Subsector : B05 Registration Date : 2010-07-23Organization : UNMZ Draft Issue Date : 2010-11-01Country : Czech Republic Latest Date for Comments : 2011-02-28Project ID : 73008810/0001 Draft for public enquiryICS :National Ref :Title : Fire protection of buildings - Changes of buildingsScope : The aim of the revision is unification of contemporary legislation and related Czech




Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2010-07-22Organization : MSZT Draft Issue Date : 2010-07-01Country : HungaryProject ID : 34810101/0001 Project EstablishedICS : 91.060.50National Ref :Title : Windows and doors. Requirements for use



Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2010-07-23Organization : UNMZ Draft Issue Date : 2010-03-30Country : Czech Republic Latest Date for Comments : 2010-09-01Project ID : 72009809/0001 Draft for public enquiryICS :National Ref :Title : Thermal insulation products for building application – Part 3: Factory made products of

extruded polystyrene foam (XPS)Scope : The aim is to determine factual parametres of thermal insulation products made of XPS for

specific usage in construction

Page 8

Relatedness :National : REV/AMD CSN 72 7221-3

Subsector : B09 Registration Date : 2010-07-23Organization : UNMZ Draft Issue Date : 2010-06-30Country : Czech Republic Latest Date for Comments : 2010-09-01Project ID : 73009210/0001 Project EstablishedICS :National Ref :Title : Thermal protection of buildings – Part 2: RequirementsScope : Ammending of CSN 73 0540-2 in connection with new technical findings and analyses

Relatedness :National : REV/AMD CSN 73 0540-2 (2007)

Subsector : B09 Registration Date : 2010-07-23Organization : UNMZ Draft Issue Date : 2010-09-30Country : Czech Republic Latest Date for Comments : 2010-12-01Project ID : 73010810/0001 Project EstablishedICS :National Ref :Title : Hygrotermal performance of buildings - Calculation and presentation of climatic data -

Part 4: Hourly data for assesing the annual energy use for heating and cooling (ISO 15927-4:2005)

Scope : Development of national annex to CSN EN ISO 15927-4 that will contain climatic data for the Czech Republic.

Relatedness :National : REV/AMD CSN EN ISO 15927-4 (2006)


Subsector B10: TIMBER STRUCTURES

Subsector : B10 Registration Date : 2010-07-23Organization : UNMZ Draft Issue Date : 2010-05-31Country : Czech Republic Latest Date for Comments : 2010-07-31Project ID : 48000310/0001 Published StandardICS :National Ref :Title : Forest reproductive materialScope : The Amendment 2 of the Czech standard ČSN 48 2115 is based on the new scientific

knowledge and states standard quality of some types of bare-rooting or containerized planting stock more precisely. It newly defines parameters of large-sized planting stock (saplings) and fast-growing tree species (Populus and Salix). Concerning the changes of the standard the appropriate texts were completed.

Relatedness :National : REV/AMD CSN 48 2115:1998

Subsector : B10 Registration Date : 2010-07-08Organization : NEN

Page 9

Country : NetherlandsProject ID : 50001579/0001 Project EstablishedICS : 79.040National Ref : NEN 5461:2010 Concept nlTitle : Requirements for timber (KVH 2000) - Sawn timber and round wood - General partScope : This standard gives terminology and methods of research concerning measurements,

moisture measurement and imperfections of wood. This standard also gives fundamentals of acceptance inspection by sampling or by complete assessment.



Subsector B21: BATHS

Subsector : B21 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023343/0001 Project EstablishedICS : 97.220.10National Ref : ÖNORM M 6219-3Title : Requirements for public and commercial sauna installations, infrared cabins, steam and

other warm chambers - Part 3: Planning and operation of hot air chambers with additional moistening

Scope : These ÖNORM describes requirements for steam and hot air chambers for wellness uses with additional moistening which are not established in timber-frame construction manner. She is not valid for chambers which serve medical-therapeutic purposes.



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2010-07-08Organization : NENCountry : NetherlandsProject ID : 50001572/0001 Project EstablishedICS : 91.140.40National Ref : NPR 3378-20:2010 Concept nlTitle : Guidelines for NEN 1078 - Part 20: Decorative log fire appliancesScope : This code of practice describes an installation mode for gasfired atmospheric heating with

an open or closed heating system. Decorative log fire appliances are open systems. Heating is not the main function of atmospheric appliances.


Subsector : B25 Registration Date : 2010-07-08Organization : NENCountry : NetherlandsProject ID : 50001573/0001 Project EstablishedICS : 91.140.40

Page 10

National Ref : NPR 3378-21:2010 nlTitle : Guidelines for NEN 1078 - Part 21: Gas cooking appliances in a kitchenScope : In this code of practice an installation method is decribes for type A gas cooking appliances

in a kitchen of a dwelling.


Subsector : B25 Registration Date : 2010-07-08Organization : NENCountry : NetherlandsProject ID : 50001574/0001 Project EstablishedICS : 91.140.40National Ref : NPR 3378-22:2010 Concept nlTitle : Guidelines for NEN 1078 - Part 22: Installation spaces of gas appliances, appliance

rooms and boiler roomsScope : This code of practice gives gidelines for installation spaces of gas appliances, appliance

rooms and boiler rooms.



Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2010-07-20Organization : SNV Draft Issue Date : 2010-07-19Country : Switzerland Latest Date for Comments : 2010-09-17Project ID : CH100015/0001 Draft for public enquiryICS : 93.080.01National Ref : SN 507701dTitle : General Conditions for Roads and Traffic, Chapters 17, 18 and appendix B; Changes

and additions in chapters 11, 12 and 20

Relatedness :National : REV/AMD SN 507701c


Subsector B27: WATERPROOFING MATERIALS

Subsector : B27 Registration Date : 2010-07-29Organization : AENORCountry : SpainProject ID : P0036119/0001 Project EstablishedICS :National Ref : PNE 88113Title : Fibre-cement profiled sheets incorporating PUR and polyester coating at the bottom,

and fittings - Requirements and test methodsScope : This document specifies the technical requirements and establishes the test methods for

fibre-cement profiled sheets incorporating PUR and polyester coating at the bottom, and its fittings. This document covers fibre-cement profiled sheets that incorporate in a second production process a PUR layer between the fibre-cement and a polyester coating placed at the

Page 11

Scope : bottom. This is done by means of an individual injection system. The final product is a slab with better mechanical characteristics and more anti-corrosive resistance. For the purpose of this documentm fibre-cement profiled sheets are classified according to their height of corrugation and their mechanical characteristics. This document does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets.



Subsector B29: AGGREGATES

Subsector : B29 Registration Date : 2010-07-02Organization : SUTNCountry : SlovakiaProject ID : 72003710/0001 Project EstablishedICS : 19.060, 91.100.15National Ref : STN 72 1171Title : Determination of mass, porosity and ratio of aggregates

Relatedness :National : REV/AMD STN 72 1171


Subsector B33: BUILDING DESIGN

Subsector : B33 Registration Date : 2010-07-22Organization : MSZT Draft Issue Date : 2010-06-03Country : HungaryProject ID : 34800107/0001 Project EstablishedICS : 91.040.10National Ref :Title : Design requirements of educational institutions. Nurseries



Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001802/0001 Project EstablishedICS :National Ref : BS 1722-2:2006 Corrigendum 1Title : Fences. Part 2. Specification for strained wire and wire mesh netting fences.

Corrigendum


Page 12

Subsector : B99 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001803/0001 Project EstablishedICS :National Ref : BS 1722-5:2006 Corrigendum 1Title : Fences. Part 5. Specification for close-boarded and wooden palisade fences.

Corrigendum



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Page 14Subsector C01: Food products

Subsector : C01 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 05701436/0001 Project EstablishedICS :National Ref : 05701436Title : Sensory analysis - Basic principles


Subsector : C01 Registration Date : 2010-07-16Organization : UNICountry : ItalyProject ID : 59007820/0001 Project EstablishedICS : 67.020National Ref : U59007820Title : Food services - Minimum requirements for the drafting of specifications , tendering

notifications and regulationsScope : This standard specifies the minimum requirements to be reported in specifications ,

tendering notifications and regulations for food services.


Subsector : C01 Registration Date : 2010-07-22Organization : UNICountry : ItalyProject ID : 59007890/0001 Project EstablishedICS : 67.020National Ref : U59007890Title : Fishery products - Requirements of the fishery chainScope : This standard specifies the requirements of the production process in the fishery chain

aiming at the qualification of the fresh fish product intended for human consumption.


Subsector : C01 Registration Date : 2010-07-22Organization : UNICountry : ItalyProject ID : 59007940/0001 Project EstablishedICS : 67.020National Ref : U59007940Title : Agricultural products and foodstuffs - Guidelines for the definition and use of optional

reserved termsScope : This standard specifies guidelines for the definition and use of agricultural products

optional reserved terms.


Page 15


Subsector C13: FERTILIZERS

Subsector : C13 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023342/0001 Project EstablishedICS : 13.080.10National Ref : ÖNORM L 1202Title : Chemical analysis of soils - Decomposition procedure for the determination of total

elementsScope : This ÖNORM describes a method for complete digestion of nutrients and harmful elements

in soils.


Subsector : C13 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023344/0001 Project EstablishedICS : 13.030.40National Ref : ÖNORM S 2027-1Title : Describing the biological reactivity of mechanically-biologically pretreated residual

wastes - Part 1: SamplingScope : This ÖNORM is part of the series ÖNORM S 2027 "stability parameters for the assessment

of waste from mechanical-biological treatment". The studies under this ÖNORM series for the evaluation of biological reactivity as one of the parameters for the assessment of the deposition ability of mechanically-biologically treated waste thereof. This part 1 of this series of standards describes the sampling of waste from mechanical-biological treatment up to the production of the field sample. The objective is a uniform sampling for the determination of all the necessary parameters in accordance with landfill ordinance 2008.


Subsector : C13 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023345/0001 Project EstablishedICS : 13.030.40National Ref : ÖNORM S 2027-2Title : Stability parameters describing the biological reactivity of mechanically-biologically

pretreated residual wastes - Part 2: Gas generation by incubation test (GS21)Scope : This ÖNORM is part of the standard series ÖNORM S 2027 "stability parameters for the

assessment of mechanicalbiological pretreated waste. The studies under this series of standards for the evaluation of biological reactivity as one of the parameters for the assessment of the deposition ability of mechanically-biologically pretreated waste thereof. This part 2 of this series of standards describes the process of determining the gas-sum donations by incubation for 21 days. The gas donations over different periods eg 90 days, but can be determined similarly to this ÖNORM by appropriate extension of the evaluation

Page 16

Scope : period. The extension of the assessment observation period allows a more thorough evaluation of the gas formation potential (eg from source materials lien for the anaerobic treatment).



pretreated residual wastes - Part 3: Gas generation by fermentation test (GB21)Scope : This ÖNORM is part of the series ÖNORM S 2027 "stability parameters for the assessment

of waste from mechanical-biological treatment". The studies under this ÖNORM series for the evaluation of biological reactivity as one of the parameters for the assessment of the deposition ability of mechanically-biologically treated waste thereof. This part 3 of this series of standards describes the process of determining the gas formation in the fermentation test for 21 days. The gas formation over different periods eg 48 days, may be required in the second extension of the reporting period was determined similarly to this ÖNORM. The extension of the evaluation period allows a more accurate assessment of gas generation potential (eg, from source-materials for the anaerobic treatment).



treated residual wastes - Part 4: Respiration activity (AT4)Scope : This ÖNORM is part of the series ÖNORM S 2027 "stability parameters for the assessment

of waste from mechanical-biological treatment". The studies under this ÖNORM series are for the assessment of the biological reactivity as one of the parameters for the assessment of the deposition ability of mechanically-biologically treated waste thereof. Furthermore, this ÖNORM can be to assess progress during the composting of mechanical-biological treatment of waste applied. This part 4 of this series of standards describes the process of determining the respiratory activity over four days in the laboratory. The respiratory activity over different periods, eg 7 days, can be determined similarly to this ÖNORM by appropriate extension of the evaluation period.



Subsector C16: WOOD PRESERVATIVES

Subsector : C16 Registration Date : 2010-07-16

Page 17

Organization : UNICountry : ItalyProject ID : 40005770/0001 Project EstablishedICS : 79.040National Ref : U40005770Title : Durability of wood and wood-based products - Guidelines for use of European standards Scope : This technical report gives a guidelines for the use of European standards published by

CEN/TC 38.



Subsector C17: TREES AND PLANTS

Subsector : C17 Registration Date : 2010-07-08Organization : SUTNCountry : SlovakiaProject ID : 46001210/0001 Project EstablishedICS : 67.060National Ref : STN 46 1300-1Title : Pulses. Part 1: Common regulationsScope : The revision of national Slovak standard will update common regulation for pulses

regarding to latest references of testing methods CEN or ISO.

Relatedness :National : REV/AMD STN 46 1300-1


Subsector C20: EXPLOSIVES AND FIREWORKS

Subsector : C20 Registration Date : 2010-07-08Organization : NENCountry : NetherlandsProject ID : 50001577/0001 Project EstablishedICS : 13.230, 29.260.20National Ref : NPR 7910-1:2010 Concept nlTitle : Classification of hazardous areas with respect to explosion hazard - Part 1: Gas

explosion hazard, based on NEN-EN-IEC 60079-10-1:2009Scope : Describes the conversion procedure for the determination of the thermal performance of

factory made solar domestic hot water systems, based on Dutch refrence conditions. It applies to all types of solar domestic hot water systems (SDHW systems) that can be tested according to ISO 9459-5 or NEN-EN 12976.


Subsector : C20 Registration Date : 2010-07-08Organization : NENCountry : NetherlandsProject ID : 50001578/0001 Project EstablishedICS : 13.230, 29.260.20National Ref : NPR 7910-2:2010 Concept nl

Page 18

Title : Classification of hazardous areas with respect to explosion hazard - Part 2: Dust explosion hazard, based on NEN-EN-IEC 61241-10-2:2009

Scope : This Dutch code of practice gives guidelines to formulate a classification of hazardous areas with respect to explosion hazard. This code of practice is a help for the practical application of NEN-EN-IEC 61241-10 and is to be used in relation to this standard. The application can be in the industrial sector as well as the mining sector.



Subsector C99: UNDETERMINED

Subsector : C99 Registration Date : 2010-07-15Organization : SUTNCountry : SlovakiaProject ID : 46001310/0001 Project EstablishedICS : 65.120National Ref : STN 46 7020Title : Animal feeding stuffs. Determination of calcium content by three different methodsScope : The national Slovak standard will specify three methods of calcium content determination:

by titrimetric manganometric method, by gravimetric method for very low contents and by titrimetric chelatometric method. This method will suport the EC Regulation no. 152/2009.

Relatedness :National : REV/AMD STN 46 7092-12, STN 46 7013-4-7

Subsector : C99 Registration Date : 2010-07-15Organization : SUTNCountry : SlovakiaProject ID : 46001410/0001 Project EstablishedICS : 65.120National Ref : STN 46 7021Title : Animal feeding stuffs. Determination of phosphorus content by gravimetric methodScope : The national Slovak standard will specify the method of phosphorus content determination

by gravimetric method, it can be used for the animal feeding stuffs analyse with high phosphorus content. This method will support the EC Regulation No. 152/2009.

Relatedness :National : REV/AMD STN 46 7092-11

Subsector : C99 Registration Date : 2010-07-15Organization : SUTNCountry : SlovakiaProject ID : 46001510/0001 Project EstablishedICS : 65.120National Ref : STN 46 7022Title : Animal feeding stuffs. Determination of added methioninScope : The national Slovak standard will specify the method of added methionin content

determination. This method will support the EC Regulation no. 152/2009.

Relatedness :National : REV/AMD STN 46 7013-5-2

Page 19

Subsector : C99 Registration Date : 2010-07-15Organization : SUTNCountry : SlovakiaProject ID : 46001610/0001 Project EstablishedICS : 65.120National Ref : STN 46 7023Title : Animal feeding stuffs. Determination of added lysine-hydrochlorid by ITP technicsScope : The national Slovak standard will specify the method of added lysin-hydrochlorid content

determination by ITP technics. This method will support the EC Regulation no. 152/2009.

Relatedness :National : REV/AMD STN 46 7013-5-1


** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Page 21Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 (Secondary Subsector)

Registration Date : 2010-07-01

Organization : BSICountry : United KingdomProject ID : 01001661/0001 Project EstablishedICS :National Ref : BS 2000-0.1Title : Methods of test for petroleum and its products. Part 0.1. General introduction.

Specifications. IP standard for thermometers (Identical with IP-Annex A)



Subsector F08: SURFACES

Subsector : F08 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023341/0001 Project EstablishedICS : 01.100.20National Ref : ÖNORM ISO 10579Title : Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid

partsScope : This International Standard gives rules for dimensioning and tolerancing non-rigid parts

where restraining of features is required during verification of dimensions and tolerances specified on a drawing.



Subsector F19: OPTICS

Subsector : F19 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 02702339/0001 Project EstablishedICS :National Ref : 02702339Title : Production in optical engineering - Diamond impregnated cup wheels - Part 8: With

hollow taper shank connection



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2010-07-16Organization : UNICountry : Italy

Page 22

Project ID : 14C80690/0001 Project EstablishedICS : 35.100.05National Ref : E14C80690Title : Road traffic and transport telematics - Automatic dynamic debiting systems and

automatic access control systems using GNSS/CN - Localization augmentation communication for GNSS/CN systems over UNI 10607 DSRC

Scope : On-board units working with satellite positioning to collect data required for charging for the use of roads operate in an autonomous way, i.e. without relying on dedicated road-side infrastructure. However, some situations (e.g. when satellite signals are not perceived), require that positioning information be updated by road stations via dedicated short range communications. This standard defines the types of data and the DSRC exchanges when the communication medium is based on the UNI 10607:2007, Parts 1 to 4, standard.



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Page 24Subsector H07: SPACE HEATING

Subsector : H07 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001726/0001 Project EstablishedICS :National Ref : BS 6230Title : Specification for installation of gas-fired forced convection air heaters for commercial

and industrial space heating (2nd and 3rd family gases)



Subsector H08: SIZING SYSTEMS

Subsector : H08 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 06233523/0001 Project EstablishedICS :National Ref : 06233523Title : Footwear - Sizes of shoes for children



Subsector H18: CENTRAL HEATING BOILERS

Subsector : H18 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001725/0001 Project EstablishedICS :National Ref : BS 6644Title : Specification for installation of gas-fired hot water boilers of rated inputs between 70kW

(net) and 1.8 MW (net) (2nd and 3rd family gases



Subsector H19: NON-ELECTRIC COOKERS AND BARBECUES

Subsector : H19 Registration Date : 2010-07-01Organization : BSI Draft Issue Date : 2010-06-28Country : United Kingdom Latest Date for Comments : 2010-08-31Project ID : 00902086/0001 Draft for public enquiryICS :National Ref : BS 6172Title : Specification for installation, servicing and maintenance of domestic gas cooking

appliances (2nd and 3rd family gases)

Page 25



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Page 27Subsector I06: PRESSURE VESSELS

Subsector : I06 Registration Date : 2010-07-16Organization : UNICountry : ItalyProject ID : 0203B449/0001 Project EstablishedICS : 23.020.30National Ref : E0203B449Title : Pressure equipment - Putting into service and use of pressure equipment and

assemblies - Part 9: Fitness for Service (FFS)Scope : The standard specifies how to apply Fitness For Service Assessment techniques to pressure

equipment.



Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 12101683/0001 Project EstablishedICS :National Ref : 12101683Title : Hexagon socket screw keys with pilot



Subsector I18: MINING

Subsector : I18 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 00802203/0001 Project EstablishedICS :National Ref : 00802203Title : Preparation of hard coal - Part 1: Survey



Subsector I20: REFRIGERATION

Subsector : I20 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 04400174/0001 Project EstablishedICS :National Ref : 04400174

Page 28

Title : Testing of cooling equipment for insulated means of transportation - Part 3: Transport refrigerating systems with dry ice


Subsector : I20 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 04400175/0001 Project EstablishedICS :National Ref : 04400175Title : Insulated means of transportation - Requirements and testing - Part 1: General


Subsector : I20 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 04400176/0001 Project EstablishedICS :National Ref : 04400176Title : Insulated means of transportation - Requirements and testing - Part 2: Mobile Container


Subsector : I20 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 04400177/0001 Project EstablishedICS :National Ref : 04400177Title : Testing of cooling equipment for insulated means of transportation - Part 4: Controlled

gas refrigerating systems with direct evaporation



Subsector I30: AIR DISTRIBUTION

Subsector : I30 Registration Date : 2010-07-23Organization : UNMZ Draft Issue Date : 2010-10-30Country : Czech Republic Latest Date for Comments : 2011-01-01Project ID : 12001010/0001 Project EstablishedICS :National Ref :Title : Ventilation for buildings - Determining performance criteria for residential ventilation

systemsScope : Development of national annex to CSN EN 15665 including the analysis of requirements on

Page 29

Scope : ventilation in residence buildings

Relatedness :National : REV/AMD CSN EN 15665 (2009)


Subsector I99: UNDETERMINED

Subsector : I99 Registration Date : 2010-07-29Organization : LVS Draft Issue Date : 2010-07-29Country : Latvia Latest Date for Comments : 2010-08-30Project ID : 28100703/0001 Draft for public enquiryICS : 03.100.30National Ref : LVS 343Title : Qualification and certification of experts for assessment of hazardous equipment –

General principlesScope : The standard regulates competence assessment and certification system for personnel who

will conduct inspection for hazardous equipment.

Relatedness :National : REV/AMD LVS 343


** End of Sector **




Sector M : METALLIC MATERIALS


Page 31Subsector M01: STEEL

Subsector : M01 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001727/0001 Project EstablishedICS :National Ref : BS 2853Title : Specification. The design and testing of steel overhead runway beams



Subsector M04: COPPER

Subsector : M04 Registration Date : 2010-07-22Organization : UNICountry : ItalyProject ID : 93043930/0001 Project EstablishedICS : 77.120.20National Ref : U93043930Title : Magnesium and magnesium alloys - Extruded bars, tubes and profiles - Tolerances on

dimensions and formScope : This standard specifies the tolerances on dimensions and form for magnesium and

magnesium alloys extruded bars and profiles. Maximum diameter of circumscribing circle CD is 800 mm (see figure 1). In case of profiles difficult to realize because of complexity of the project, the tolerances shall be agreed between purchaser and supplier.



Subsector M08: LIGHT ALLOYS

Subsector : M08 Registration Date : 2010-07-29Organization : AENORCountry : SpainProject ID : P0035936/0001 Project EstablishedICS :National Ref : PNE-EN 573-3:2009/1MTitle : Aluminium and aluminium alloys - Chemical composition and form of wrought products -

Part 3: Chemical composition and form of productsScope : This amendment includes a national annex (informative) with the correspondence of EN

and former UNE designations for aluminium alloys

Relatedness :National : REV/AMD UNE-EN 573-3:2009


Subsector M18: METAL WIRE PRODUCTS

Subsector : M18 (Secondary Registration Date : 2010-07-01

Page 32

Subsector : Subsector) Registration Date :Organization : BSICountry : United KingdomProject ID : 01001802/0001 Project EstablishedICS :National Ref : BS 1722-2:2006 Corrigendum 1Title : Fences. Part 2. Specification for strained wire and wire mesh netting fences.

Corrigendum



Subsector M21: PRECIOUS METALS

Subsector : M21 Registration Date : 2010-07-23Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-09-30Project ID : BG020001/0001 Draft for public enquiryICS : 39.060National Ref : prBDS 5782Title : Gold. Technical delivery conditions Scope : This standard specifies the technical delivery conditions of gold intended for the

production of gold based alloys, chemicals and other purposes, delivered in the form of cast ingots and strips

Relatedness :National : REV/AMD BDS 5782:1987

Subsector : M21 Registration Date : 2010-07-23Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-09-30Project ID : BG020002/0001 Draft for public enquiryICS : 39.060National Ref : prBDS 5876Title : Silver. Technical delivery conditions Scope : This standard specifies the technical delivery conditions of silver intended for the

production of silver based alloys, chemicals, silver powders and other purposes, delivered in the form of cast ingots

Relatedness :National : REV/AMD BDS 5876:1987


** End of Sector **




Sector N : NON-METALLIC MATERIALS


Page 34Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 07400178/0001 Project EstablishedICS :National Ref : 07400178Title : Paperboard - Terms and grades



Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001642/0001 Project EstablishedICS :National Ref : BS 2000-306Title : Methods of test for petroleum and its products. Part 306. Determination of oxidation

stability of straight mineral oil


Subsector : N03 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001644/0001 Project EstablishedICS :National Ref : BS 2000-455Title : Methods of test for petroleum and its products. Part 455. Determination of manganese

in gasoline. Atomic absorption spectrometry (AAS) method


Subsector : N03 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001645/0001 Project EstablishedICS :National Ref : BS 2000-10Title : Methods of test for petroleum and its products. Part 10. Determination of kerosene

burning characteristics. 24 hour method (Identical with IP 10)


Subsector : N03 Registration Date : 2010-07-01

Page 35

Organization : BSICountry : United KingdomProject ID : 01001646/0001 Project EstablishedICS :National Ref : BS 2000-12Title : Methods of test for petroleum and its products. Part 12. Determination of specific energy

(Identical with IP 12


Subsector : N03 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001647/0001 Project EstablishedICS :National Ref : BS 2000-19Title : Methods of test for petroleum and its products Part 19. Determination of demulsibility

characteristics of lubricating oil (identical with IP 19)


Subsector : N03 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001648/0001 Project EstablishedICS :National Ref : BS 2000-48Title : Methods of test for petroleum and its products. Part 48. Determination of oxidation

characteristics of lubricating oil (identical with IP 48)


Subsector : N03 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001661/0001 Project EstablishedICS :National Ref : BS 2000-0.1Title : Methods of test for petroleum and its products. Part 0.1. General introduction.

Specifications. IP standard for thermometers (Identical with IP-Annex A)



Subsector N04: REFRACTORIES

Subsector : N04 Registration Date : 2010-07-22Organization : UNI

Page 36

Country : ItalyProject ID : 1312C960/0001 Project EstablishedICS : 83.100National Ref : E1312C960Title : Flexible cellular polymeric materials - Determination of resistance to static fatigueScope : The standard describes a method for determining the resistance to static fatigue of a

flexible cellular polymeric materials by determining the percentage change in thickness and the hardness index for penetration after the material compression at room temperature.

Relatedness :National : REV/AMD UNI 6355:1989


Subsector N06: RUBBER

Subsector : N06 Registration Date : 2010-07-29Organization : AENORCountry : SpainProject ID : P0036074/0001 Project EstablishedICS :National Ref : PNE 53616Title : Elastomers. Specification and test methods for elastomer seals used in lightingScope : This standard specifies the characteristics shall met the materials used for manufacture the

elastomeric seals used in lighting

Relatedness :National : REV/AMD UNE 53616:1985 EX

Subsector : N06 Registration Date : 2010-07-29Organization : AENORCountry : SpainProject ID : P0036078/0001 Project EstablishedICS :National Ref : PNE 53539Title : Elastomers. No metallic pipes for connections to installations and devices using 1st, 2nd

y 3rd family gases. Characteristics and test methods.Scope : This standard specifies dimensions, characteristics and test methods shall meet the no

metallic flexible pipes for connections to installations and devices using 1ª, 2ª y 3ª family gases

Relatedness :National : REV/AMD UNE 53539:1990, UNE 53539:1991 ERRATUM, UNE 53539/1M:1996


Subsector N12: TIMBER PRODUCTS

Subsector : N12 (Secondary Subsector)


Organization : BSICountry : United KingdomProject ID : 01001803/0001 Project EstablishedICS :National Ref : BS 1722-5:2006 Corrigendum 1

Page 37

Title : Fences. Part 5. Specification for close-boarded and wooden palisade fences. Corrigendum



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2010-07-19Organization : MSZT Draft Issue Date : 2010-07-20Country : HungaryProject ID : 34871201/0001 Project EstablishedICS : 23.040.01National Ref :Title : Unplasticized poly(vinyl chloride) (PVC-U) plastics piping systems for waste dischange

inside buildings to a maximum discharge temperature of 75 °C

Relatedness :National : REV/AMD MSZ 8000-4

Subsector : N14 Registration Date : 2010-07-29Organization : AENORCountry : SpainProject ID : P0036075/0001 Project EstablishedICS :National Ref : PNE 53367-1Title : Plastics piping systems for water supply for irrigation. Polyethylene (PE). Part 1:

Specifications for pipesScope : This part of the standard specifies characteristics and test methods for polyethylene (PE)

pipes for irrigation


Subsector : N14 Registration Date : 2010-07-29Organization : AENORCountry : SpainProject ID : P0036076/0001 Project EstablishedICS :National Ref : PNE 53367-2Title : Plastics piping systems for water supply for irrigation. Polyethylene (PE). Part 2: Fittings

and the systemScope : This part of the standard specifies characteristics and test methods for fittings for irrigation

and the system



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Page 39Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023349/0001 Project EstablishedICS : 03.080.30, 17.140.01, 91.120.20National Ref : ÖNORM S 5012Title : Acoustic principles for the construction of restaurants, similar establishments and

related installationsScope : The present ÖNORM is for the planning of restaurants, comparable facilities of commercial

and non-commercial kind. She contains bases for the computational calculation of sound appointments from guest of restaurants, comparable facilities as well as with it to linked arrangements to reach the necessary sound insulation to the avoidance from unreasonable neighbor's nuisances by a uniform action by the sound-technical planning as well as implementation and to prove. The calculation of the sound power level of music instruments and ensembles are desribed in ONR 305015.


Subsector : S01 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023350/0001 Project EstablishedICS : 17.140.01, 97.200.20National Ref : ONR 305015Title : Calculation of the sound power level of music instruments and ensemblesScope : In this ONR the calculation of the sound power level is shown for music ensembles with

different instruments. The acoustic irradiation occurs outside or in closed rooms without electric acoustic irradiation arrangement.



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023337/0001 Project EstablishedICS : 13.060.20, 91.140.65National Ref : ÖNORM B 5019Title : Hygienic aspects of the planning, construction, operation, surveillance and rehabilitation

of central heating installations for drinking waterScope : This ÖNORM describes measures for the avoidance of legionella growth and for the

prevention of infections by heated drinking water. The points relevant for hygiene by planning, implementation, operation, supervision and reconstruction of central drinking water heating installations and distribution systems are described. The implementation in this ÖNORM is valid in particular for sick person's institutions and health resort institutions, nursing facilities, bath facilities, accommodation operations, communal facilities, public buildings and dwelling house equipments.

Page 40


Subsector : S09 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023338/0001 Project EstablishedICS : 13.060.25, 91.140.30National Ref : ÖNORM B 5020Title : Hygienic aspects of the planning, construction, operation, maintenance, surveillance

and rehabilitation of evaporative cooling installationsScope : This ÖNORM describes demands for the water quality for the avoidance of legionella

growth in evaporative cooling installations. The points relevant for hygiene by planning, implementation, operation, supervision and reconstruction of open wet cooling towers and vaporisation cooler with closed circulations are described.


Subsector : S09 Registration Date : 2010-07-14Organization : UNMZ Draft Issue Date : 2010-08-30Country : Czech Republic Latest Date for Comments : 2010-09-30Project ID : 75003810/0001 Draft for public enquiryICS :National Ref :Title : Water quality - Determination of humic substancesScope : The Standard specifies the method for the determination of humic substances in the range

0,5 mg/l to 15 mg/l. The method is used for the analysis of surface water from peat basins which is used for treatment for human consumption.


Subsector : S09 Registration Date : 2010-07-14Organization : UNMZ Draft Issue Date : 2010-08-30Country : Czech Republic Latest Date for Comments : 2009-09-30Project ID : 75003910/0001 Draft for public enquiryICS :National Ref :Title : Water quality - Determination of oxidation-reduction potentialScope : The Standard specifies the method for the determination of oxidation-reduction potential

in drinking water, surface water, ground water and waste water. The method measures the oxidation-reduction potential in the range ± 1 500 mV.


Subsector : S09 Registration Date : 2010-07-14Organization : UNMZ Draft Issue Date : 2010-08-30Country : Czech Republic Latest Date for Comments : 2010-09-30

Page 41

Project ID : 75004010/0001 Draft for public enquiryICS :National Ref :Title : Water quality - Pretreatment of waste water samples before chemical analysisScope : The Standard specifies pretreatment of waste water samples before chemical analysis with

the target to facilitate obtaining of comparable analytical results even for samples containing suspended solids.


Subsector : S09 Registration Date : 2010-07-14Organization : UNMZ Draft Issue Date : 2010-08-30Country : Czech Republic Latest Date for Comments : 2010-10-30Project ID : 75004909/0001 Draft for public enquiryICS :National Ref :Title : Water quality - Determination of dissolved reactive silisium using ammonium molybdateScope : The Standard specifies the method for the determination of dissolved reactive silicon using

ammonium molybdate(VI) in surface water, ground water and service water in the range 0,25 mg/l to 15 mg/l.



Subsector S13: ERGONOMICS

Subsector : S13 Registration Date : 2010-07-16Organization : UNICountry : ItalyProject ID : 48000900/0001 Project EstablishedICS : 13.180National Ref : U48000900Title : The contribution of technical standards ergonomic analysis and assessment of

psychosocial risk factors and work-related stressScope : This Technical Report proposes to take account of psychosocial factors and the mental

work-load, with particular reference to work-related stress risk.



Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION

Subsector : S20 Registration Date : 2010-07-22Organization : UNICountry : ItalyProject ID : 53002120/0001 Project EstablishedICS : 13.030.40National Ref : U53002120Title : Maintenance - Maintenance ratios for the waste managementScope : The standard is intended to provide indicators of waste management services to assess the

Page 42

Scope : activities made by the maintenance services and the relevant costs incurred to define the indices useful to compare the internal services company and between companies of the same sector.



Subsector S26: ENVIRONMENTAL MANAGEMENT

Subsector : S26 Registration Date : 2010-07-22Organization : UNICountry : ItalyProject ID : 53002130/0001 Project EstablishedICS : 13.020.10National Ref : U53002130Title : Environmental management systems - Application of UNI EN ISO 14001 in Public

AdministrationScope : This technical report aims to provide information on the application in Italy of

environmental management systems in accordance with UNI EN ISO 14001:2004 applied to public administration with specific powers provided by legislation incorporating and/or statutes, territorial government.



Subsector S27: WASTE - CHARACTERIZATION, TREATMENT AND STREAMS

Subsector : S27 Registration Date : 2010-07-13Organization : ASICountry : AustriaProject ID : 00023348/0001 Project EstablishedICS : 13.030.10National Ref : ÖNORM S 2097-4Title : Sorting analysis of waste - Part 4: Evaluation of measuring results and analysis reportScope : The ÖNORM S 2097-1 to -4 "sorting analysis of waste" is concerned with the identification

and investigation of the composition of solid waste, including used materials/reusable materials using physical methods. This part four applies for the evaluation of the analytical results of manually sortable waste (lump size, piece size).


Subsector : S27 Registration Date : 2010-07-15Organization : ASICountry : AustriaProject ID : 00023354/0001 Project EstablishedICS : 13.080.05National Ref : ÖNORM S 2126Title : Basic characterization of dredged material prior to excavation or removal of activitiesScope : This ÖNORM applies to basic characterization of dredged material prior to excavation or

removal of activities, which is obtained after the excavation or removal of as waste and

Page 43

Scope : recycling or disposal is to be fed.


Subsector : S27 Registration Date : 2010-07-16Organization : UNICountry : ItalyProject ID : 53002100/0001 Project EstablishedICS : 13.030.01National Ref : U53002100Title : Wastes - Manual sampling and preparation of sample and analysis of eluatesScope : The standard describes: - The process of defining a sampling plan - Manual sampling of

liquid, granular, past-like, coarse, monolithic and sludge in relation to their different physical and short-term storage; - Procedures for reducing the size of the samples of the waste collected in the field, to facilitate transport in the laboratory; - Documentation for the traceability of sampling operations; - Procedures for packaging, preservation, sample short-term storage and transport of samples of waste; - Procedures for reducing the size of samples for laboratory analysis; - Procedures for preparation and analysis of eluates. It applies to all types of waste such as liquid waste, liquefied by heating, liquid sludge, past-like sludge, powders or granular waste, coarse waste and monolithic waste.



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2010-07-22Organization : MSACountry : MaltaProject ID : 00003500/0001 Project EstablishedICS : 97.200.40, 97.200.40National Ref : MSA 3500Title : Public Playground – Requirements for Public Playground Safety and Their Management Scope : This National Standard specifies the minimum requirements for a public outdoor

playground facility to: a) consistently provide a safe environment that meets user and applicable regulatory requirements, and b) aim to enhance user satisfaction. It aims to provide also general guidelines for the design and proper management of a playground.

Relatedness :National : REV/AMD MSA 3500:2010

Subsector : S99 (Secondary Subsector)


Organization : MSACountry : MaltaProject ID : 00003500/0001 Project EstablishedICS : 97.200.40, 97.200.40National Ref : MSA 3500Title : Public Playground – Requirements for Public Playground Safety and Their Management Scope : This National Standard specifies the minimum requirements for a public outdoor

Page 44

Scope : playground facility to: a) consistently provide a safe environment that meets user and applicable regulatory requirements, and b) aim to enhance user satisfaction. It aims to provide also general guidelines for the design and proper management of a playground.

Relatedness :National : REV/AMD MSA 3500:2010

Subsector : S99 Registration Date : 2010-07-22Organization : MSZT Draft Issue Date : 2010-07-08Country : HungaryProject ID : 34871903/0001 Project EstablishedICS : 13.280National Ref :Title : Protection against ionizing radiation. Radiation protection at the application of unsealed

radioactive products

Relatedness :National : REV/AMD MSZ 62-7

Subsector : S99 Registration Date : 2010-07-16Organization : UNICountry : ItalyProject ID : 53002090/0001 Project EstablishedICS : 13.020National Ref : U53002090Title : Environmental impact sudies - TerminologyScope : This standard specifies the definition of the terms adopted in most environmental impact

studies.


Subsector : S99 Registration Date : 2010-07-16Organization : UNICountry : ItalyProject ID : 53002110/0001 Project EstablishedICS : 13.030National Ref : U53002110Title : Guidelines for end of life vehicles treatment and environmental problems consequencesScope : The rule defines operational procedures for the treatment of end of life vehicles by

operators of authorised facilities. The rule identifies, from the acceptance procedures of the vehicle in the settlement, the procedures for safeguarding and dismantling, storage of materials and parts and environmental issues related to the activity.


Subsector : S99 Registration Date : 2010-07-22Organization : UNICountry : ItalyProject ID : 62000010/0001 Project Established

Page 45

ICS : 03.100.01National Ref : U62000010Title : Guidelines for Equal OpportunitiesScope : The technical report provides guidance to organizations in order to administer the issue of

equal opportunities, considered of particular importance in the field of social responsibility. The document will help to grow the corporate culture on equal opportunities, in line with what is defined in the Charter for Equal Opportunities and the particulars of the European Commission "Equality between men and women -2009".



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Page 47Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 05202452/0001 Project EstablishedICS :National Ref : 05202452Title : Retro-reflective registration plates for motor vehicles and trailers


Subsector : T03 Registration Date : 2010-07-29Organization : AENORCountry : SpainProject ID : P0035994/0001 Project EstablishedICS :National Ref : PNE 26524Title : Test procedure for vehicle evaluation in wet proving ground with medium adherence.Scope : This standard specifies one open-loop test method for passenger car evaluation in wet

proving ground with medium adherence. It includes straight aquaplaning, cornering aquaplaning, and steady state corning behaviour and lap time in a circuit.



Subsector T08: CRANES

Subsector : T08 (Secondary Subsector)


Organization : BSICountry : United KingdomProject ID : 01001727/0001 Project EstablishedICS :National Ref : BS 2853Title : Specification. The design and testing of steel overhead runway beams


Subsector : T08 Registration Date : 2010-07-29Organization : LVS Draft Issue Date : 2010-07-29Country : Latvia Latest Date for Comments : 2010-08-30Project ID : 28100701/0001 Draft for public enquiryICS : 53.020.20National Ref : LVS 267Title : Technical examination of cranesScope : The purpose of this standard is to establish unified procedure to inspect cargo cranes. The

standard defines minimal inspection amount and requirements for cargo cranes technical condition to ensure safe use.

Page 48



Subsector T16: LIFTS & ESCALATORS

Subsector : T16 Registration Date : 2010-07-01Organization : BSICountry : United KingdomProject ID : 01001601/0001 Project EstablishedICS :National Ref : BS 5655-6Title : Lifts and service lifts. Part 6. Code of practice for the selection and installation of new

lifts



Subsector T17: BUILDERS HOISTS

Subsector : T17 Registration Date : 2010-07-29Organization : LVS Draft Issue Date : 2010-07-29Country : Latvia Latest Date for Comments : 2010-08-30Project ID : 28100702/0001 Draft for public enquiryICS : 53.020.20National Ref : LVS 268Title : Technical examination of hoists for lifting of peopleScope : The purpose of this standard is to establish unified procedure to inspect hoists for lifting of

people. The standard defines minimal inspection amount and requirements for hoists technical condition to ensure safe use



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2010-07-29Organization : AENORCountry : SpainProject ID : P0036114/0001 Project EstablishedICS :National Ref : PNE 199152-1Title : Road equipment. Data quality. Data analysis. Part 1: Traffic dataScope : This standard constitutes a system for the exchange of information between Traffic Control

Centres of an area or region (Zonal Traffic Control Centre) and other systems or Institutions. The goal is to have a standard platform delivering the real-time publication of traffic, meteorological and signalling parameters, enabling several systems to exchange information and consult historical and statistical information. Hereinafter the information exchange system which is the subject of this standard will be

Page 49

Scope : referred to as Sistema INTERCENTROS. The procedure for exchange is based on the use of centralised databases where the management systems will upload both real-time information (equipment states and alarms and the parameters provided by them, detailed road traffic information, etc.) and historical information (only data). As one example of use, based on the information exchange method described by this standard, the information updated in real time by the Zonal Traffic Control Centres could be displayed on the operation interfaces of the Traffic Management System at the Centre of Centres.



Subsector T99: UNDETERMINED

Subsector : T99 Registration Date : 2010-07-13Organization : DINCountry : GermanyProject ID : 13202176/0001 Project EstablishedICS : 21.140National Ref : DIN 83106Title : Profile Gaskets for heavy hinged doors on ships and for hatches



** End of Sector **

2010-05

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180,

373

A11 Security Services / CEN/BT/TF 167;

391; 384; 370;

CEN/WS 044

A12 Consultancy Services / 395; 381

A99 Undetermined / CEN/WS 002 CEN/WS 004 CEN/WS 037 CEN/WS 039 CEN/WS 041 CEN/WS 051 375; 374; 376; 385

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277;

346; 349 284; 288; 297; 340;

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371

CEN/BT WG 173 CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229 B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360 307; 327; 338; 387 CEN/WS 008 CEN/WS 018

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 3 CEN/CLC/JWG 4 CEN/WS 027

F99 Undetermined / 389

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2

65, 157

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30 CEN/BT/TF 196

378

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383 CEN/WS 019

N03 Petroleum products 28 19; 336 CEN/WS 038

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238

N22 Feather and related materials / 222

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162 CEN/WS 026

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC WG/CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC JWG/AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316 CEN/CLC/TC 3 CEN/WS 031 CEN/WS 053

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; 403 CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS 377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC WG/FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS DFA CEN/WS DIR CEN/WS EBES CEN/WS ECH CEN/WS ECO CEN/ES EFI CEN/WS ESI CEN/WS FAS CEN/WS FUN CEN/WS IEC CEN/WS JXF CEN/WS LCT CEN/WS LTS CEN/WS MDC CEN/WS MET CEN/WS POR CEN/WS URI CEN/WS XFS CEN/WS ORC CEN/WS CTC CEN/WS XML CEN/WS MEE CEN/WS SCE CEN/WS MES CEN/WS UDP CEN/WS MMI CEN/WS FS2 CEN/WS AUT CEN/WS ICT CEN/WS KMA CEN/WS TEX CEN/WS SAN CEN/WS DPP CEN/WS HIC CEN/WS MLX CEN/WS eGO CEN/WS BII CEN/WS ADN CEN/WS CAT CEN/WS CST CEN/WS DIS CEN/WS ESR CEN/WS EUR CEN/WS FIN CEN/WS GEN CEN/WS ISD CEN/WS NEA CEN/WS NOM

CEN/WS QIS CEN/WS TWE CEN/WS WAC CEN/WS eIN CEN/WS ePR

Documents

Monthly Notifications Register - 31.45.242.21831.45.242.218/pdf/MNR/201007CENmnr.pdf · Title : Eurocode - Basis of structural design - Part 1: ... This standard supplements series