Monthly Notifications Register - iss.rs · European : Modified BS 1881-207:1992 Subsector : B02 Registration Date : 2013-04-11 Organization : TSE Country : Turkey Project ID : tst91945/0001

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2013-04-01 to 2013-04-30

Register issued on : 2013-05-08

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Page 3Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2013-04-25Organization : ASRO Draft Issue Date : 2013-05-01Country : Romania Latest Date for Comments : 2013-06-15Project ID : 31100011/0001 Project EstablishedICS :National Ref : SR BS 31100:2013Title : Risk management — Code of practice and guidance for implementation of ISO 31000Scope : This standard provides a basis for understanding, developing, implementing and

maintaining proportionate and effective risk management throughout an organization, in order to enhance the organization’s likelihood of achieving its objectives.

Relatedness :National : REV/AMD BS 31100:2011

Subsector : A11 Registration Date : 2013-04-02Organization : TSECountry : TurkeyProject ID : tst12426/0001 Project EstablishedICS : 03.080.30National Ref :Title : Authorized services – for medical devices - RulessScope : This standard includes rules for management technical equipment structrural

characteristics and personnel characteristics of the compenent services of medical equipments

Relatedness :National : New

Subsector : A11 Registration Date : 2013-04-04Organization : TSECountry : TurkeyProject ID : tst91675/0001 Project EstablishedICS : 03.080.30, 97.200.40National Ref :Title : Competent services – Binding Machines, Laminating Machines and Spine Binding

Machines – RulesScope : This standard includes rules for operating, physical characteristics, managership, technical

equipment, personnel specifications and certification of Competent services for Binding Machines, Laminating Machines and Spine Binding Machines.


** End of Subsector **

Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2013-04-18Organization : UNICountry : ItalyProject ID : 5000B920/0001 Project EstablishedICS : 03.040

Page 4

National Ref : U5000B920Title : Non-regulated professions - Professional locksmiths - Knowledge, skill and competence

requirementsScope : This standard specifies the requirements for the activity of professional locksmith, i.e. the

expert who professionally works in activities which in scientific, technical and commodity point of view, concern locks and safes in general, in any civil and industrial application and use. These requirements are specified, starting from the identified tasks and specific activities, in terms of knowledge, skill and competence, in accordance with the European Qualification Framework (EQF) and they’re expressed in order to facilitate the processes of assessment and validation of learning outcomes.


Subsector : A99 Registration Date : 2013-04-18Organization : UNICountry : ItalyProject ID : 71002120/0001 Project EstablishedICS : 03.040National Ref : U71002120Title : Qualification of road accident reconstructionistsScope : This standard specifies a minimum set of competences for the qualification of road

accidents reconstructionists, so that they can reconstruct what happened, its technical causes and the behavior of those involved in the road accident.

Relatedness :National : REV/AMD UNI 11294:2008

Subsector : A99 Registration Date : 2013-04-25Organization : TSECountry : TurkeyProject ID : t1012998/0002 Project EstablishedICS : 03.080.30National Ref :Title : Work places - Flower shops - General rulesScope : This standard includes, general rules for managemenet, structural properties, personnel of

flower shops



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Page 6Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2013-04-05Organization : LVSCountry : LatviaProject ID : 00024005/0001 Project EstablishedICS : 13.220.20National Ref : prLVS/TS 453Title : Design and installation of hypoxy (oxygen reduced) environment fire prevention

equipment Scope : This technical specification refers to fire initiation prevention devices operating on the

oxygen concentration reduction principle. Oxygen concentration is reduced by controlled entering of gasiform nitrogen in protected area


Subsector : B01 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 03100918/0001 Project EstablishedICS :National Ref : 03100918Title : Firefighting equipment - Permanently installed generators (generating sets) less than 12

kVA for the use in firefighting vehicles; Amendment A1


Subsector : B01 Registration Date : 2013-04-04Organization : NENCountry : NetherlandsProject ID : 50001810/0001 Project EstablishedICS : 13.220.20National Ref : NEN 2077 Concept nlTitle : Fixed firefighting systems - Residential sprinkler systems - Design, installation and

maintenance Scope : NEN 2077 specifies requirements and gives recommendations for the design, installation

and maintenance for solid sprinkler systems in resdental buildings or dwellings. The standard includes the construction of water supply, the required parts, installation and testing, maintenance and extention of existing installations and the description of constructional details of buildings.


Subsector : B01 Registration Date : 2013-04-04Organization : NENCountry : NetherlandsProject ID : 50001811/0001 Project EstablishedICS : 13.220.50, 91.060.10National Ref : NEN 6079:2013 Concept nlTitle : Fire control and fire restriction

Page 7

Scope : This standard helps with the interpretation of the functional specifications for fire limitations and fire control in new estate and existing buildings.



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025680/0001 Project EstablishedICS : 91.060.40National Ref : ÖNORM B 8206Title : Relining of chimneys - Design and constructionScope : This Austrian Standard applies to the design and constructions of relining of chimneys for

the evacuation of flue gases from burning appliances. This Austrian Standard does not apply to the relining of free-standing chimneys according to ÖNORM EN 13084.


Subsector : B02 Registration Date : 2013-04-29Organization : TSECountry : TurkeyProject ID : tst91582/0001 Project EstablishedICS :National Ref :Title : Standard Practice for Measuring Delaminations in Concrete Bridge Decks by SoundingScope : This practice covers procedures for surveying concrete bridge decks by sounding to

determine delaminations in the concrete. It is not intended that the procedures described herein are to be used on bridge decks that have been overlaid with bituminous mixtures. The procedures may be used on bridge decks that have been overlaid with portland cement concrete mixtures; however, areas indicated to be delaminated may have a lack of bond between the overlay and the underlying bridge deck

Relatedness :National : NewInternational : Modified ASTM D 4580-03:2012

Subsector : B02 Registration Date : 2013-04-29Organization : TSECountry : TurkeyProject ID : tst91584/0001 Project EstablishedICS : 93.080.20National Ref :Title : Standard Test Method for Determining the Thickness of Bound Pavement Layers Using

Short-Pulse Radar Scope : This test method covers the nondestructive determination

of thickness of bound pavement layers using short-pulse radar. Bound pavement layers are defined as the upper layers of a pavement, consisting of materials such as bituminous, concrete, portland-cement concrete, roller-compacted

Page 8

Scope : concrete, and stabilized bases. Bound pavement layers does not include granular base and subbase materials.

Relatedness :National : NewInternational : Modified ASTM D 4748:2010

Subsector : B02 Registration Date : 2013-04-29Organization : TSECountry : TurkeyProject ID : tst91620/0001 Project EstablishedICS : 91.080.40National Ref :Title : Standard test method for tensile strength of concrete surfaces and the bond strength or

tensile strength of concrete repair and overlay materials by direct tension (pull-off method)

Scope : This test method is suitable for both field and laboratory use to determine one or more of the following:The near-surface tensile strength of the substrate as an indicator of the adequacy of surface preparation before application of a repair or overlay materialThe bond strength of a repair or an overlay material to the substrate.The tensile strength of a repair or overlay material, or an adhesive used in repairs, after the material has been applied to a surface.

Relatedness :National : NewInternational : Modified ASTM C 1583:2004

Subsector : B02 Registration Date : 2013-04-08Organization : TSECountry : TurkeyProject ID : tst91662/0001 Project EstablishedICS : 91.100.30National Ref :Title : Load Tests of Concrete Structures: Methods, Magnitude, Protocols, and Acceptance

CriteriaScope : This report provides the recommendations regarding selection of test load magnitudes,

protocol, and acceptance criteria to be used when performing load testing as a means of evaluating safety and serviceability of concrete structural members and systems.


Subsector : B02 Registration Date : 2013-04-22Organization : TSECountry : TurkeyProject ID : tst91663/0001 Project EstablishedICS :National Ref :Title : Standard test method for detecting delaminations in bridge decks using infrared

thermographyScope : This test method covers the determination of delaminations in portland-cement concrete

bridge decks using infrared thermography. This test method is intended for use on exposed and overlaid concrete bridge decks.

Relatedness :

Page 9

National : NewInternational : Modified ASTM D 4788:2007

Subsector : B02 Registration Date : 2013-04-22Organization : TSECountry : TurkeyProject ID : tst91664/0001 Project EstablishedICS : 91.080.40National Ref :Title : Standard test method for evaluating asphalt-covered concrete bridge decks using

ground penetrating radarScope : This test method covers several ground penetrating radar (GPR) evaluation procedures that

can be used to evaluate the condition of concrete bridge decks overlaid with asphaltic concrete wearing surfaces. These procedures can also be used for bridge decks overlaid with portland cement concrete and for bridge decks without an overlay.


Subsector : B02 Registration Date : 2013-04-11Organization : TSECountry : TurkeyProject ID : tst91943/0001 Project EstablishedICS : 91.100.30National Ref :Title : Recommendations for determination of strain in concreteScope : This guide gives recommendations on methods and devices which can be used to

determine strain in concrete.

Relatedness :National : NewEuropean : Modified BS 1881-206:1986

Subsector : B02 Registration Date : 2013-04-11Organization : TSECountry : TurkeyProject ID : tst91944/0001 Project EstablishedICS : 91.100.30National Ref :Title : Recommendations for the assessment of concrete strength by near-to-surface non-

destructive testsScope : This guide gives recommendations on tests that are designed to assess the strength of

concrete by causing localized failure in a small zone, typically up to 75 mm from the surface, according to the method.


Subsector : B02 Registration Date : 2013-04-11Organization : TSECountry : TurkeyProject ID : tst91945/0001 Project EstablishedICS : 91.100.30

Page 10

National Ref :Title : Recommendations for the determination of the initial surface absorption of concreteScope : This recommendations provides guidance on application, influencing factors and

interpretation of results for low pressure assessment of surface absorption of concrete.



Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2013-04-25Organization : SNV Draft Issue Date : 2013-04-17Country : Switzerland Latest Date for Comments : 2013-06-15Project ID : CH130008/0001 Draft for public enquiryICS : 91.080.10National Ref : SIA 264Title : Composite Steel and Concrete Structures

Relatedness :National : REV/AMD SIA 264 (2003

Subsector : B03 Registration Date : 2013-04-25Organization : SNV Draft Issue Date : 2013-04-17Country : Switzerland Latest Date for Comments : 2013-06-15Project ID : CH130009/0001 Draft for public enquiryICS : 91.080.10National Ref : SIA 264/1Title : Composite Steel and Concrete Structures - Supplementary Specifications

Relatedness :National : REV/AMD SIA 264/1 (2003)


Subsector B04: CEMENT

Subsector : B04 Registration Date : 2013-04-30Organization : AENORCountry : SpainProject ID : P0041213/0001 Project EstablishedICS :National Ref : PNE 80103Title : Test methods of cements. Physical analysis. Actual density determination.Scope : This standard specifies three test methods (Le Chatelier and air and liquid pycnometer) for

the determination of the actual density of the cements covered by the European and national standards.

Relatedness :National : REV/AMD UNE 80103:1986, UNE 80104:1986, UNE 80105:1986

Subsector : B04 Registration Date : 2013-04-30

Page 11

Organization : AENORCountry : SpainProject ID : P0041214/0001 Project EstablishedICS :National Ref : PNE 80113Title : Test methods of cements. Physical analysis. Determination of the autoclave expansionScope : This standard revises the current version and defines a test method for the determination

of the expansion or shrinkage of cement specimens by the autoclave method.

Relatedness :National : REV/AMD UNE 80113:1986


Subsector B07: GLASS

Subsector : B07 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025681/0001 Project EstablishedICS : 01.040.81, 81.040.20National Ref : ÖNORM B 3710Title : Glass in building - Terms with definitions for types of glass and glass productsScope : The present Austrian Standard includes terms with definitions for glass and glass products

used for civil engineering, as far as these products are inorganic melting products solidified without crystallization.



Subsector B10: TIMBER STRUCTURES

Subsector : B10 Registration Date : 2013-04-01Organization : AENORCountry : SpainProject ID : P0041043/0001 Project EstablishedICS :National Ref : PNE 56547Title : Visual classification for wood overhead poles.Scope : This standard establishes a visual grading system of wood poles for overhead lines mainly

intended for telecommunication and power transport. The standard applies only to wood of Spanish sources. This standard is based on the features related in EN 14229 and gives characteristic values for bending strength and MOE.



Subsector B12: MASONRY

Subsector : B12 Registration Date : 2013-04-15

Page 12

Organization : ASICountry : AustriaProject ID : 00025682/0001 Project EstablishedICS : 91.010.20, 91.180National Ref : ÖNORM B 3113Title : Planning and execution of masonry of natural stone and artificial stoneScope : This ÖNORM specifies masonry works using natural and artificial stone. Requirements for

laying of natural and artificial stone on heating floor screeds can be found in ÖNORMEN B 2242-1, -2, -4 and -5.


Subsector : B12 Registration Date : 2013-04-16Organization : TSECountry : TurkeyProject ID : t1000202/0001 Project EstablishedICS : 81.060.20, 91.100.25National Ref :Title : Ceramic tiles-Çini tiles (Anatolian tiles)Scope : This standard specifies the çini tiles (Anatolian tiles) for indoor and outdoor uses which are

nat effected by the atmospheric conditions



Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY

Subsector : B17 Registration Date : 2013-04-11Organization : UNMZCountry : Czech RepublicProject ID : 36007013/0001 Project EstablishedICS : 29.140.40, 73.100.20National Ref :Title : Underground lighting in mining – Lighting-technological planning principles – Part 1:

General requirementsScope : This project aims to revise general requirements on the design of electrical stationary

underground ligting in mining.

Relatedness :National : REV/AMD CSN 36 0050-1

Subsector : B17 Registration Date : 2013-04-11Organization : UNMZCountry : Czech RepublicProject ID : 36007113/0001 Project EstablishedICS : 29.140.40, 73.100.20National Ref :Title : Underground lighting in mining – Lighting-technological planning principles – Part 2:

Coalfaces with shield supportScope : This project aims to revise technical principles for the design of stationary underground

lighting in coalfaces with shield support in mechanized coal mining with reference to the

Page 13

Scope : revised CSN 36 0050-1.


Subsector : B17 Registration Date : 2013-04-11Organization : UNMZCountry : Czech RepublicProject ID : 36007213/0001 Project EstablishedICS : 29.140.40, 73.100.20National Ref :Title : Underground lighting in mining – Lighting-technological planning principles – Part 3: T-

junctionsScope : This project aims to revise technical and ergonomic principles for the design of stationary

underground lighting in the area of T-junctions in coal mines with reference to the revised CSN 36 0050-1.


Subsector : B17 Registration Date : 2013-04-11Organization : UNMZCountry : Czech RepublicProject ID : 36007313/0001 Project EstablishedICS : 17.180.20, 91.160.01National Ref :Title : Lihting measurement – Part 4: Measurement of artificial lighting in outdoor spacesScope : This project aims to create a new part of the series of standards for lighting measurement

with specific requirements for the measurement of the artificial lighting conditions in outdoor spaces in relation with general requirements given in CSN 36 0011-1.


Subsector : B17 Registration Date : 2013-04-11Organization : UNMZCountry : Czech RepublicProject ID : 36007413/0001 Project EstablishedICS : 17.180.20, 91.160.01National Ref :Title : Lihting measurement – Part 3: Measurement of artificial lighting in indoor spacesScope : This project aims to revise specific requirements for the measurement of the artificial

lighting conditions and the additional lighting in case of integral lighting of indoor spaces in buildings in relation with general requirements given in CSN 36 0011-1.

Relatedness :National : REV/AMD ČSN 36 0011-3

Subsector : B17 Registration Date : 2013-04-11Organization : UNMZCountry : Czech Republic

Page 14

Project ID : 36007513/0001 Project EstablishedICS : 17.180.20, 91.160.01National Ref :Title : Lihting measurement – Part 2: Measurement of daylightingScope : This project aims to revise specific requirements for the measurement of daylight

conditions and daylight component of the integral lighting in buildings in relation with general requirements given in CSN 36 0011-1.


Subsector : B17 Registration Date : 2013-04-11Organization : UNMZCountry : Czech RepublicProject ID : 36007613/0001 Project EstablishedICS : 17.180.20, 91.160.01National Ref :Title : Lihting measurement – Part 1: General regulationsScope : This project aims to revise general requirements in the field of measurement of daylight,

artificial lighting and integral lighting indoors and newly outdoors, including measurement procedures, measurement equipment properties, measurement results evaluation and the content of the measurement report. Detailed procedures for measurement of dayligh and artificial light will be dealt with in separate parts.



Subsector B19: CERAMIC TILES

Subsector : B19 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301307/0001 Project EstablishedICS :National Ref : BS 5385-3Title : Wall and floor tiling. Design and installation of internal andexternal ceramic and mosaic

floor tiling in normal conditions. Code of practice



Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 11903699/0001 Project EstablishedICS :National Ref : 11903699Title : Wastewater treatment plants - Principles for the design of structures and technical

equipment - Part 12: Conveying equipment

Page 15


Subsector : B20 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 11903710/0001 Project EstablishedICS : 93.080.30National Ref : DIN 1229Title : Gully tops and manhole tops for vehicular and pedestrian areas - Mass per unit area

and pull-out force



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025679/0001 Project EstablishedICS : 91.140.40National Ref : ONR 131749Title : Classification of gas appliances according to the method of evacuation of combustion

products and information for the use in AustriaScope : This ONR contains the classification system for gas appliances from CEN/TR 1749:2009 and

gives additional information for the application for Austria. Furthermore hints for the purchase of gas appliances are given


Subsector : B25 Registration Date : 2013-04-04Organization : NENCountry : NetherlandsProject ID : 50001812/0001 Project EstablishedICS : 91.140.40National Ref : NPR 3378-5:2012/A1:2013 Concept nlTitle : Guidelines for gas installations - Section gas pipework - Part 5: Gas pipework -

Installation general - Guidelines for NEN 1078 and NEN 8078Scope : This document amends NPR 3378-5:2012


Subsector : B25 Registration Date : 2013-04-04Organization : NENCountry : NetherlandsProject ID : 50001813/0001 Project EstablishedICS : 91.140.40

Page 16

National Ref : NPR 3378-6:2012/A1:2013 Concept nlTitle : Guidelines for gas installations - Section gas pipe work - Part 6: Gas pipe work above

ground - Guidelines for NEN 1078 en NEN 8078Scope : This document amends NPR 3378-6



Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301308/0001 Project EstablishedICS :National Ref : BS 594987:2010Title : Asphalt for roads and other paved areas. Specification for transport,laying,

compaction and type testing protocols


Subsector : B26 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301309/0001 Project EstablishedICS :National Ref : PD 6691:2010Title : Guidance on the use of BS EN 13108 Bituminous mixtures.

Material specifications


Subsector : B26 Registration Date : 2013-04-10Organization : ISTCountry : Iceland Latest Date for Comments : 2013-06-10Project ID : 07510000/0001 Draft for public enquiryICS : 93.080National Ref : ÍST 75Title : Production of Bituminous mixtures

Relatedness :National : NewEuropean : Not Equivalent to EN 13108-5, EN 13108-21

Subsector : B26 Registration Date : 2013-04-02Organization : SNV Draft Issue Date : 2013-03-25Country : Switzerland Latest Date for Comments : 2013-05-06Project ID : CH130007/0001 Draft for public enquiryICS : 93.080.10National Ref : SN 640215

Page 17

Title : Design of road space - multipurpose strip



Subsector B29: AGGREGATES

Subsector : B29 Registration Date : 2013-04-03Organization : EVSCountry : EstoniaProject ID : 00113537/0001 Project EstablishedICS : 91.100.15National Ref : prEVS 901-20Title : Road construction - Test methods - Part 20: Determination of permeabilityScope : This Estonian Standard specifies laboratory test method to determine the coefficient of

permeability of water through water-saturated soils and natural fine aggregate used for filter layer in road construction and civil engineering works. The test is carried out for specimens with lower sieve size (d) = 0 and upper sieve size (D) = 4 mm, which are compacted at the optimum water content that is based on (relationship between the water content and the dry density of) Proctor compaction under specified test conditions of aggregate or soil particles passing sieve size 4 mm.


Subsector : B29 Registration Date : 2013-04-10Organization : ISTCountry : Iceland Latest Date for Comments : 2013-06-10Project ID : 07610000/0001 Draft for public enquiryICS : 91.100National Ref : ÍST 76Title : Production of aggregates

Relatedness :National : NewEuropean : Not Equivalent to EN 12620, EN 13242, EN 13043


Subsector B31: HEATING SYSTEMS IN BUILDINGS

Subsector : B31 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025683/0001 Project EstablishedICS : 71.100.45, 91.140.10National Ref : ÖNORM H 5195-2Title : Heat transfer fluids for technical building equipment - Part 2: Antifreezing protection in

heating systems and other systems using heat transfer fluids with antifreezing protectionScope : This Austrian Standard specifies requirements for new-built installations with heat transfer

fluids with antifreezing protection and thermal solar systems.


Page 18

Subsector : B31 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025684/0001 Project EstablishedICS : 91.140.30National Ref : ÖNORM H 5195-3Title : Heat transfer fluids for technical building equipment - Part 3: Closed cold and cooling

water systems for air conditioning systems and industrial useScope : This Austrian Standard specifies requirements for heat transfer fluids for protection against

corrosion damages and deposits. It applies to planning, installation and operation of closed cold and cooling water systems for air conditioning systems and industrial applications.



Subsector B33: BUILDING DESIGN

Subsector : B33 Registration Date : 2013-04-10Organization : ISTCountry : Iceland Latest Date for Comments : 2013-06-10Project ID : 06830000/0001 Draft for public enquiryICS : 91.140National Ref : ÍST 68Title : Sanitary Drainage - Wastewater Installations



Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2013-04-10Organization : ISTCountry : Iceland Latest Date for Comments : 2013-06-10Project ID : 06730000/0001 Draft for public enquiryICS : 91.140National Ref : ÍST 67Title : Domestic water supply installations


Subsector : B99 Registration Date : 2013-04-04Organization : NENCountry : NetherlandsProject ID : 50001807/0001 Project EstablishedICS : 91.020National Ref : NEN 8021:2013 Concept nlTitle : Performance measurement real estate

Page 19

Scope : The performance measurement of real estate is used for the objective establishment of the usability of real estate for certain aims.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Page 21Subsector C01: Food products

Subsector : C01 Registration Date : 2013-04-29Organization : ASRO Draft Issue Date : 2012-12-15Country : Romania Latest Date for Comments : 2013-02-28Project ID : 01355901/0001 Project EstablishedICS :National Ref : SR 13559:2013Title : Marmalade of plums. Quality requirementsScope : This standard reffers to the marmalade of plums obtained by the boiling of plums, whithout

addition of sugar.

Relatedness :National : REV/AMD SP 334/1996

Subsector : C01 Registration Date : 2013-04-04Organization : NENCountry : NetherlandsProject ID : 50001808/0001 Project EstablishedICS : 67.100.01National Ref : NEN 6807:2013 Concept nlTitle : Milk and milk products - Determination of the content of thermoduric micro-organismsScope : This standard describes a determination method of the number of mesophile aerobe

thermoduric micro organisms in milk and milk products.


Subsector : C01 Registration Date : 2013-04-04Organization : NENCountry : NetherlandsProject ID : 50001809/0001 Project EstablishedICS : 67.100.01National Ref : NEN 6808:2013 Concept nlTitle : Milk and milk products - Determination of the content of thermoduric streptococciScope : This standard describes a determination method of the number of thermoduric

streptococci in milk and milk products.


Subsector : C01 Registration Date : 2013-04-18Organization : UNICountry : ItalyProject ID : 59528790/0001 Project EstablishedICS : 67.250National Ref : U59528790Title : Metallic closures in contact with foodsuffs - Determination of Epoxidised SoyaBean Oil

(ESBO) in food and food simulantsScope : This standard specifies two methods using respectively CG/MS and LC for the determination

of Epoxidised SoyaBean Oil (ESBO) migration from metallic closures in contact with foodsuffs to food simulants.

Page 22


Subsector : C01 Registration Date : 2013-04-08Organization : TSECountry : TurkeyProject ID : t1007420/0001 Project EstablishedICS : 67.080.10National Ref :Title : DatesScope : This standard applies to dates with stones. It does not apply to pipless, pressed sliced and

frozen dates. This standard also applies to cleaned, dried and pastorized and similarly processed dates which do not effect of marketing and commercial qualinty of dates.


Subsector : C01 Registration Date : 2013-04-17Organization : TSECountry : TurkeyProject ID : t2003190/0001 Project EstablishedICS : 67.080.20National Ref :Title : Dry Soup MixScope : This standard specifies the requirements for dry soup mix. It does not cover instant soup

which is a kind of dry soup mix.


Subsector : C01 Registration Date : 2013-04-17Organization : TSECountry : TurkeyProject ID : t2005312/0002 Project EstablishedICS : 67.080.20National Ref :Title : Canned MushroomsScope : This standard applies to canned mushrooms which is produced with cultered mushroom.


Subsector : C01 Registration Date : 2013-04-17Organization : TSECountry : TurkeyProject ID : t2007800/0001 Project EstablishedICS : 67.140.30National Ref :Title : ChocolateScope : This standard specifies chocolate.

Page 23


Subsector : C01 Registration Date : 2013-04-11Organization : TSECountry : TurkeyProject ID : t3000796/0001 Project EstablishedICS : 67.080.20National Ref :Title : OnionsScope : This standard applies to dried onions to be supplied as dry to the consumer. It does not

apply to green leafy fresh onions and anions kept for sowing.


Subsector : C01 Registration Date : 2013-04-04Organization : TSECountry : TurkeyProject ID : tst01279/0001 Project EstablishedICS : 67.080.20National Ref :Title : Unshelled Pistachio NutsScope : This standard applies to unshelled pistachio nuts described in clause 0.2.1 It does not apply

to salted, fried and other kind of processed pistachio nuts


Subsector : C01 Registration Date : 2013-04-10Organization : TSECountry : TurkeyProject ID : tst02409/0001 Project EstablishedICS : 67.120.20National Ref :Title : Poultry CarcassScope : This standard includes the poultry carcass marketed as fresh, chilled and frozen forms. It

doesn't include dissected, cooked and other processed poultry carcass and their pieces.


Subsector : C01 Registration Date : 2013-04-10Organization : TSECountry : TurkeyProject ID : tst05925/0001 Project EstablishedICS : 67.120.20National Ref :Title : Poultry-Rules for Slaughtering and Carcass PreparingScope : This standard applies to the rules concerning transportation, killing, feathering, dressing,

Page 24

Scope : packaging of carcasses of poultry and also applies to poultry slaughter hauses, every kind of equipments used in slaughter hauses and workers and all of the persons.


Subsector : C01 Registration Date : 2013-04-10Organization : TSECountry : TurkeyProject ID : tst12325/0001 Project EstablishedICS : 67.120.20National Ref :Title : Processed poultry carcass-ThighScope : This standard includes the processed poultry carcass breasts.


Subsector : C01 Registration Date : 2013-04-10Organization : TSECountry : TurkeyProject ID : tst12326/0001 Project EstablishedICS : 67.120.20National Ref :Title : Processed poultry carcass-BreastScope : This standard includes the processed poultry carcass breasts.


Subsector : C01 Registration Date : 2013-04-17Organization : TSECountry : TurkeyProject ID : tst12397/0002 Project EstablishedICS : 67.160.20National Ref :Title : Blackberry NectarScope : This standard covers blackbarry nectar.


Subsector : C01 Registration Date : 2013-04-17Organization : TSECountry : TurkeyProject ID : tst12536/0002 Project EstablishedICS : 67.160.20National Ref :Title : Cornelian cherry nectarScope : This standard is specifiy to cornellian sherry nectar.

Relatedness :

Page 25

National : New


Subsector C02: PAINTS AND RELATED PRODUCTS

Subsector : C02 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025686/0001 Project EstablishedICS : 91.010.30, 91.180National Ref : ÖNORM B 3430-1Title : Planing and execution of painting and coating work - Part 1: Painting on wood, metal,

plastic, masonry, plaster, concrete and lightweight building boards Scope : This ÖNORM specifies the planning and execution of comprehensive and non-opaque

coatings with liquid and paste coatings on wood and wood products, metal, plastic, masonry, plaster, concrete and lightweight building boards. Arts and craft paint work, as well as industrial coatings are not the subject of this ÖNORM.



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2013-04-08Organization : TSECountry : TurkeyProject ID : t3002974/0001 Project EstablishedICS : 67.060National Ref :Title : WheatScope : This standard comprise wheat. It doesn't comprise the wheat mentioned seed in the

document



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Page 27Subsector F01: TECHNICAL DRAWINGS

Subsector : F01 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025675/0001 Project EstablishedICS : 01.100.30National Ref : ÖNORM A 6240-1Title : Technical drawings for civil engineering - Part 1: General specifications and principles of

presentation for building constructionScope : This Austrian Standard specifies principles of presentation for building construction and

related, space building constructions for civil engineering, except construction drawings according to ÖNORM A 6220 and ÖNORM EN ISO 3766.


Subsector : F01 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025677/0001 Project EstablishedICS : 01.100.30National Ref : ÖNORM A 6240-2Title : Technical drawings for civil engineering - Part 2: Marking, dimensioning and

presentationScope : This Austrian Standard specifies all fields concerning the presentation of plans for technical

drawings of building construction and related, space building constructions for civil engineering, except construction drawings according to ÖNORM A 6220 and ÖNORM EN ISO 3766.



Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 Registration Date : 2013-04-10Organization : UNMZ Draft Issue Date : 2013-06-30Country : Czech Republic Latest Date for Comments : 2013-09-30Project ID : 75003313/0001 Project EstablishedICS :National Ref :Title : Hydrological data on surface waterScope : Standard revision with having regard on new methods in hydrometrology.

Relatedness :National : REV/AMD Revision of ČSN 75 1400 (1997)

Subsector : F05 Registration Date : 2013-04-10Organization : UNMZ Draft Issue Date : 2013-04-30Country : Czech Republic Latest Date for Comments : 2013-05-31Project ID : 75003413/0001 Project EstablishedICS :

Page 28

National Ref :Title : Crossing and convergence of watercourse with railways, roadways and linesScope : The aim of the amendment Z1 is changing subclauses with electrical lines signation over

waterways.

Relatedness :National : REV/AMD Amendment of ČSN 75 2340 (2012)


Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2013-04-04Organization : NENCountry : NetherlandsProject ID : 50001806/0001 Project EstablishedICS : 03.120.01National Ref : NTA 8545:2013 Concept nlTitle : Maintenance - Knowledge managementScope : NTA 8545 offers a roadmap for knowledge management to the process industry as well as a

guideline for individual companies and collectives for the implementation of the MKM-roadmap and for future maintenance of the terminology and methods set in this technical agreement.


Subsector : F20 Registration Date : 2013-04-16Organization : TSECountry : TurkeyProject ID : tst10000/0001 Project EstablishedICS : 03.120.10National Ref :Title : Mutual acecceptance of government quality assurance and usage of the allied quality

assurance publicationsScope : This standard is about mutual acecceptance of NATO governments quality assurance and

usage of the allied quality assurance


Subsector : F20 Registration Date : 2013-04-16Organization : TSECountry : TurkeyProject ID : tst10001/0001 Project EstablishedICS : 03.120.10National Ref :Title : Quality assurance requirements for design development and productionScope : This standard is about quality assurance requirements for design development and

production


Page 29** End of Subsector **

Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK

Subsector : F21 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301278/0001 Project EstablishedICS :National Ref : BS 5760-25Title : Specification of a Prior for Bayesian Reliability Demonstration Tests



Subsector F22: LOGISTICS

Subsector : F22 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301112/0001 Project EstablishedICS :National Ref : BS 10501Title : Guide to implement procurement fraud controls



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Page 31Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 00516795/0001 Project EstablishedICS :National Ref : 00516795Title : Sport halls - Halls for gymnastics and games - Part 6: Provisions for installation and

anchorage of sporting equipment



Subsector H13: JEWELLERY

Subsector : H13 Registration Date : 2013-04-04Organization : TSECountry : TurkeyProject ID : tst07000/0002 Project EstablishedICS : 39.060, 77.120.70National Ref :Title : Articles Made of Gold and Gold Alloys.Scope : This standard specifies the jewelry articles made from gold. Articles in the form of bullion,

sheet, rod, tube, scrap etc.are not scope of this standard. Dental implants made from gold and scientific purpose goods are not also covered in this standard.



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Page 33Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301276/0001 Project EstablishedICS :National Ref : BS 3692Title : ISO metric precision hexagon bolts, screws and nuts. Specification



Subsector I11: MACHINE TOOLS

Subsector : I11 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 03100916/0001 Project EstablishedICS :National Ref : 03100916Title : Firefighting equipment - Portable generating set - Part 1: Portable generating set

<größer => 5 kVA; Amendment A1



Subsector I13: GAS CONTAINERS

Subsector : I13 Registration Date : 2013-04-25Organization : TSECountry : TurkeyProject ID : tst11939/0001 Project EstablishedICS : 03.080.30National Ref :Title : Liquefied petroleum gases (LPG) -Automotive refuelling stations - Safety rulesScope : This standard covers safety rules of refueling station for automotives for liquefied

petroleum gases.



Subsector I15: EQUIPMENT FOR PETROLEUM INDUSTRY

Subsector : I15 Registration Date : 2013-04-18Organization : SUTNCountry : SlovakiaProject ID : 38300713/0001 Project EstablishedICS :National Ref : STN 38 6460

Page 34

Title : Pressure gas stations and pipework for liquified petroleum gas (LPG).Technical requirements and safety

Relatedness :National : REV/AMD STN 38 6460

Subsector : I15 Registration Date : 2013-04-18Organization : SUTNCountry : SlovakiaProject ID : 38300813/0001 Project EstablishedICS :National Ref : STN 38 6462Title : Automotive filling stations for liquefied petroleum gas (LPG).Technical requirements and

safety

Relatedness :National : REV/AMD STN 38 6462


Subsector I18: MINING

Subsector : I18 (Secondary Subsector)

Registration Date : 2013-04-11

Organization : UNMZCountry : Czech RepublicProject ID : 36007013/0001 Project EstablishedICS : 29.140.40, 73.100.20National Ref :Title : Underground lighting in mining – Lighting-technological planning principles – Part 1:

General requirementsScope : This project aims to revise general requirements on the design of electrical stationary

underground ligting in mining.




Organization : UNMZCountry : Czech RepublicProject ID : 36007113/0001 Project EstablishedICS : 29.140.40, 73.100.20National Ref :Title : Underground lighting in mining – Lighting-technological planning principles – Part 2:

Coalfaces with shield supportScope : This project aims to revise technical principles for the design of stationary underground

lighting in coalfaces with shield support in mechanized coal mining with reference to the revised CSN 36 0050-1.


Page 35



Organization : UNMZCountry : Czech RepublicProject ID : 36007213/0001 Project EstablishedICS : 29.140.40, 73.100.20National Ref :Title : Underground lighting in mining – Lighting-technological planning principles – Part 3: T-

junctionsScope : This project aims to revise technical and ergonomic principles for the design of stationary

underground lighting in the area of T-junctions in coal mines with reference to the revised CSN 36 0050-1.



Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 06234183/0001 Project EstablishedICS :National Ref : 06234183Title : Nuclear facilities - Protection of metallic surfaces of structural parts from damage from

assembly aids, gaskets, packings, packaging material and thermal insulating materials


Subsector : I19 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 08000200/0001 Project EstablishedICS :National Ref : 08000200Title : Operation of medical MR equipment



Subsector I23: PUMPS

Subsector : I23 Registration Date : 2013-04-25Organization : TSECountry : TurkeyProject ID : tst02522/0001 Project EstablishedICS : 23.040.60National Ref :Title : Flanges for Hand Pumps and Motor Vehicles With Two Connection Holes Scope : This standard covers flanges for hand pumps and motor vehicles with two holes, working

Page 36

Scope : pressure being 2,5 Kgl/cmı.

Relatedness :National : NewEuropean : Not Equivalent to DIN 5435:1980


Subsector I28: FLUID POWER

Subsector : I28 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301052/0001 Project EstablishedICS :National Ref : BS 4518:1982+A1Title : Specification for metric dimensions of toroidal sealing rings('O'-rings) and their housings.

Amendment



Subsector I30: AIR DISTRIBUTION

Subsector : I30 Registration Date : 2013-04-30Organization : AENORCountry : SpainProject ID : P0041258/0001 Project EstablishedICS :National Ref : PNE 100166Title : Air conditioning. Ventilation for parking.Scope : This standard establishes the criteria to be followed for the calculation and design of

ventilation systems for parking and garages. It deals with ventilation systems in parkings and garages whose main objectives: - Maintain concentration levels of gaseous pollutants below limits harmful to health. -Remove the smoke generated by the fire, helping to reduce the density and temperature of the fumes during it, and allow for faster removal of smoke after fire is out.



Subsector I31: VALVES

Subsector : I31 Registration Date : 2013-04-18Organization : UNICountry : ItalyProject ID : 78000770/0001 Project EstablishedICS : 13.240National Ref : U78000770Title : Devices acts to decrease the spring force of a known quantity and controllable for

checking the calibration of the safety valves in operation

Scope : The standard defines the application, the characteristics, the limits of use and methods for

Page 37

Scope : the use of devices designed to decrease the force of the springs of the safety valves of a known and controllable quantity to determine the pressure calibration at the installation site during normal operation. The standard applies to the verification of the set pressure of the safety valves , placed to protect pressure equipment containing fluids in the state of saturated or superheated water vapor, non-corrosive gases or vapors, non-flammable or non-hazardous.



Subsector I32: FLANGES

Subsector : I32 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 08201230/0001 Project EstablishedICS : 23.040.80National Ref : DIN 28090-2Title : Static gaskets for flange connections - Gaskets made from sheets - Part 2: Special test

procedures for quality assurance


Subsector : I32 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 08201231/0001 Project EstablishedICS : 23.040.80National Ref : DIN 28090-3Title : Static gaskets for flange connections - Gaskets made from sheets - Part 3: Chemical

resistance test procedures


Subsector : I32 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 08201232/0001 Project EstablishedICS : 21.140National Ref : DIN 28091-1Title : Technical delivery conditions for gasket sheets - Part 1: General requirements for

gasket materials


Subsector : I32 Registration Date : 2013-04-12Organization : DINCountry : Germany

Page 38

Project ID : 08201233/0001 Project EstablishedICS : 21.140National Ref : DIN 28091-2Title : Technical delivery conditions for gasket sheets - Part 2: Requirements and testing for

fibre-based gasket materials (FA)


Subsector : I32 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 08201234/0001 Project EstablishedICS : 21.140National Ref : DIN 28091-3Title : Technical delivery conditions for gasket sheets - Part 3: Requirements and testing for

PTFE-based gasket materials (TF)


Subsector : I32 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 08201235/0001 Project EstablishedICS : 21.140National Ref : DIN 28091-4Title : Technical delivery conditions for gasket sheets - Part 4: Requirements and testing for

expanded graphite-based gasket materials (GR)



** End of Sector **




Sector M : METALLIC MATERIALS


Page 40Subsector M01: STEEL

Subsector : M01 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301294/0001 Project EstablishedICS :National Ref : BS 8597Title : Reinforcement couplers. Requirements and test methods



Subsector M15: METALLIC CORROSION

Subsector : M15 Registration Date : 2013-04-30Organization : AENORCountry : SpainProject ID : P0041308/0001 Project EstablishedICS :National Ref : PNE 112086Title : Tribocorrosion testing procedure for passivating materials.Scope : The primary objective of this standard is to address the 'why' and 'how' of performing

tribocorrosion tests, as well as the need for a well-described testing concept and protocol for passivating materials. This protocol provides: - A description of the physical, chemical and electrochemical background necessary for the correct application of experimental tools and techniques allowing a qualitative and/or quantitative analysis of tribocorrosion tests. - A way to characterize the impact of tribocorrosion on the reliability and durability of tribological systems, and to prevent and to deal with risks. - A detailed description of a testing protocol for passivating metallic materials that will allow an interlaboratory comparison of experimental data. This includes a detailed description of sample preparation before testing, the selection of appropriate testing conditions, the performance of tests, and the post-testing data handling.



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Page 42Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2013-04-18Organization : PKNCountry : PolandProject ID : 222.1103/0001 Project EstablishedICS : 75.100National Ref : prPN-C-96016Title : Testing of Lubricants - Determination of oil separation from lubricating grease under

static conditionsScope : This Standard specifies a method for the determination of oil separation of lubricating

greases, with the exception of free-flowing greases (which pass unchanged through the sieve of the test cell during the test)


Subsector : N03 Registration Date : 2013-04-04Organization : TSECountry : TurkeyProject ID : tst02739/0001 Project EstablishedICS : 75.100National Ref :Title : Determination of leakage tendencies of automotive whell bearing greases Scope : This standard specifies a test method for the determination of leakage tendencies of

automotive whell bearing greases


Subsector : N03 Registration Date : 2013-04-02Organization : TSECountry : TurkeyProject ID : tst91590/0001 Project EstablishedICS : 75.100National Ref :Title : Petroleum gases - Determination of sulfur by oxidative microcoulometryScope : This standard specifies a method for the determination of sulfur by oxidative

microcoulometry in petreoleum gases.

Relatedness :National : NewInternational : Modified ASTM D3246:2011


Subsector N04: REFRACTORIES

Subsector : N04 Registration Date : 2013-04-25Organization : TSECountry : TurkeyProject ID : tst04974/0001 Project EstablishedICS : 81.080National Ref :Title : Bazik Refrakter Malzemeler- Hidratasyon Derecesi Tayini

Page 43

Scope : This standard specifies the autoclave method for hydration degrees of basic refractory materials.

Relatedness :National : NewEuropean : Modified ASTM C 456-93:2008


Subsector N07: SAWN TIMBER

Subsector : N07 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025654/0001 Project EstablishedICS : 79.040National Ref : ÖNORM L 1021Title : Measurement of round timberScope : This ÖNORM defines relevant terms for the measurement of timber, it describes the

methods of measurement with the slide caliper, and the electronic measurement business and determines the interpretation of results. New methods for the determination of the taper and curvature are described normatively using electronic logs measuring systems. In addition, the information required in measurement protocols and used in the measurement protocols abbreviations are defined.



Subsector N12: TIMBER PRODUCTS

Subsector : N12 Registration Date : 2013-04-19Organization : BDSCountry : BulgariaProject ID : BG033001/0001 Project EstablishedICS : 79.040National Ref : prBDS 3722Title : Timber for production of cellulose, semicellulose and wood-based panelsScope : This standard refers to round and split timbers and waste from the woodworking and

furniture industry designed for production of cellulose, semicellulose and wood-based panels. The revised edition of the standard will incorporate Amendment 1/1999 and requirements for sorting, storage, rules for measurement and acceptance of timber.

Relatedness :National : REV/AMD BDS 3722:1997


Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025674/0001 Project EstablishedICS : 23.040.20, 23.040.45, 91.140.80

Page 44

National Ref : ÖNORM EN 1519-1/ATitle : Plastics piping systems for soil and waste discharge (low and high temperature) within

the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system (Amendment)

Scope : This European Standard specifies the requirements for pipes, fittings and the system of polyethylene (PE) solid wall piping systems in the field of soil and waste discharge - inside buildings and - for both inside buildings and buried in ground within the building structure. It also specifies the test parameters for the test methods referred to in this standard. This standard is applicable to PE pipes and fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for the following purposes: a) soil and waste discharge pipework for the conveyance of domestic waste waters (low and high temperature); b) ventilation pipework associated with a); c) rainwater pipework within the building structure.


Subsector : N14 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025687/0001 Project EstablishedICS : 23.040.20, 23.040.45, 91.140.80National Ref : ÖNORM EN 1451-1/ATitle : Plastics piping systems for soil and waste discharge (low and high temperature) within

the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system (Amendment)

Scope : This European Standard specifies the requirements for pipes, fittings and the system of polypropylene (PP) solid-wall piping systems in the field of soil and waste discharge (low and high temperature) inside buildings and for soil and waste discharge systems for both inside buildings and buried in ground within the building structure.



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Page 46Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 00516763/0001 Project EstablishedICS :National Ref : 00516763Title : Sound insulation in buildings - Part 2: Verification of compliance with the requirements

by calculation


Subsector : S01 Registration Date : 2013-04-18Organization : UNICountry : ItalyProject ID : 20012480/0001 Project EstablishedICS : 91.120.20National Ref : U20012480Title : Building acoustics - Internal acoustical characteristics of confined spaces Scope : This standard specifies, based on the different rooms’ purpose, the acoustical parameters

that better describe the acoustical qualities of a room. For each function and each parameters a suggested value is defined.



Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2013-04-18Organization : UNICountry : ItalyProject ID : 53002930/0001 Project EstablishedICS : 13.040National Ref : U53002930Title : Stationary source emissions - Determination of hydrogen sulphide (H2S) in flue Scope : The standard specifies a sampling method and gas analysis for the determination of H2S

concentration in emissions. The method applies to conveyed gas flows from industrial plants and, more generally, as residual gases in which the concentration of H2S may vary from 1 mg m-3 to 500 mg m-3 in normal conditions of pressure and temperature.



Subsector S09: WATER QUALITY AND WATER SUPPLY

Page 47

Subsector : S09 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301111/0001 Project EstablishedICS :National Ref : BS 8554Title : Sampling and monitoring of hot and cold water services in buildings -Code of

Practice


Subsector : S09 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 11903706/0001 Project EstablishedICS :National Ref : 11903706Title : Mechanical filters for drinking water installations - Application of mechanical filters

according to DIN EN 13443-1


Subsector : S09 Registration Date : 2013-04-02Organization : TSECountry : TurkeyProject ID : t2007886/0001 Project EstablishedICS : 13.060.01, 13.060.50National Ref :Title : Water Quality-Determination of Orthophosphate With Stannous Chloride MethodScope : This standard is about the determination of orthophosphate in water by using stannous

chloride method.



Subsector S12: GAS ANALYSIS

Subsector : S12 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301306/0001 Project EstablishedICS :National Ref : BS 8485Title : Code of practice for the characterization and remediation from ground gas in

affected developments



Page 48Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION

Subsector : S20 Registration Date : 2013-04-18Organization : UNICountry : ItalyProject ID : 53002810/0001 Project EstablishedICS : 13.030.40National Ref : U53002810Title : Refuse collection vehicles - Safety controls for vehicles and equipment in the sector of

waste management to guarantee an adequate safety level during operationScope : This technical specification defines methods to carry out safety controls for vehicles and

equipment in the sector of waste management, in order to guarantee an adequate safety level during operation.



Subsector S23: PERSONAL & PROPERTY PROTECTION AGAINST AGGRESSION/ BURGLARY

Subsector : S23 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301113/0001 Project EstablishedICS :National Ref : BS 8473Title : Intruder and hold-up alarm systems. Management of false alarms. Code of

practice



Subsector S24: SOIL QUALITY

Subsector : S24 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025685/0001 Project EstablishedICS : 13.030.99, 65.020.99National Ref : ÖNORM S 2202Title : Guidelines for application of compostScope : In the present ÖNORM the utilisation of compost is determined.


Subsector : S24 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301053/0001 Project EstablishedICS :National Ref : BS 10175:2011+A1

Page 49

Title : Investigation of potentially contaminated sites. Code of practice. Amendment



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Page 51Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 13202467/0001 Project EstablishedICS :National Ref : 13202467Title : Gates in fixed guard rails on the deck of sea-going vessels


Subsector : T01 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 13202468/0001 Project EstablishedICS :National Ref : 13202468Title : Handrails on superstructures and deckhouses on seagoing vessels


Subsector : T01 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 13202469/0001 Project EstablishedICS :National Ref : 13202469Title : Removable railings for sea-going vessels


Subsector : T01 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 13202470/0001 Project EstablishedICS :National Ref : 13202470Title : Ladders on ships, medium type


Subsector : T01 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 13202471/0001 Project EstablishedICS :National Ref : 13202471

Page 52

Title : Ladders on ships, heavy type


Subsector : T01 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 13202472/0001 Project EstablishedICS :National Ref : 13202472Title : Footholds on bulwark


Subsector : T01 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 13202473/0001 Project EstablishedICS :National Ref : 13202473Title : Resting podests at ladders on ships



Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2013-04-12Organization : DINCountry : GermanyProject ID : 05100775/0001 Project EstablishedICS :National Ref : 05100775Title : Roller contact tipper vehicles, roller containers - Part 1: Roller contact tipper vehicles up

to 26 t, roller containers type 1570 made from steel




Relatedness :

Page 53

National : New





Subsector T08: CRANES

Subsector : T08 Registration Date : 2013-04-26Organization : BSI Draft Issue Date : 2013-04-24Country : United Kingdom Latest Date for Comments : 2013-06-30Project ID : 01200370/0001 Draft for public enquiryICS :National Ref : BS 7121-2-9Title : Code of practice for the safe use of cranes. Part 2-9. Inspection,

maintenance and thorough examination. Cargo handling and container cranes



Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT

Subsector : T09 Registration Date : 2013-04-15Organization : ASICountry : AustriaProject ID : 00025678/0001 Project EstablishedICS : 55.180.99National Ref : ÖNORM B 4920-4Title : Terminals for transshipments of goods - Planning - Part 4: Connection to waterwaysScope : This Austrian standard applies to the planning of terminals for transshipments of goods

with connection to waterways and shall be used together with ÖNORM B 4920-1 to -3, -5 and -6. The standard is primarily for the conditions on the Danube but also applicable for other navigable waters.



Subsector T12: INDUSTRIAL TRUCKS

Subsector : T12 Registration Date : 2013-04-30Organization : AENOR

Page 54

Country : SpainProject ID : P0041253/0001 Project EstablishedICS :National Ref : PNE 58451Title : Training for operators of industrial trucks till 10 000 kg.Scope : Training program for operators of industrial trucks till 10 000 kg in order to assure a safe

use. This second edition cancels and replaces the first edition (UNE 58451:2012). Some clauses have been revised in order to clarify and interpret the text correctly.



Subsector T16: LIFTS & ESCALATORS

Subsector : T16 Registration Date : 2013-04-18Organization : UNMZ Draft Issue Date : 2013-03-31Country : Czech Republic Latest Date for Comments : 2013-05-31Project ID : 27000713/0001 Project EstablishedICS :National Ref :Title : Safety rules for the construction and installation of passenger and goods lifts - Essential

changes of lifts and requirements for solving of insufficient safety spaces in elevator schafts in the lifts in the existing buildings

Scope : Revision of this standard is made by reason of bring into harmony clauses of this standard, which pertain to safety rules for construction and installation of passenger and goods lifts and their essential changes, with harmonised european standards. ISO 1996-2:2009.

Relatedness :National : REV/AMD ČSN 274011 (2004)

Subsector : T16 (Secondary Subsector)


Organization : UNMZ Draft Issue Date : 2013-03-31Country : Czech Republic Latest Date for Comments : 2013-05-31Project ID : 27000713/0001 Project EstablishedICS :National Ref :Title : Safety rules for the construction and installation of passenger and goods lifts - Essential

changes of lifts and requirements for solving of insufficient safety spaces in elevator schafts in the lifts in the existing buildings

Scope : Revision of this standard is made by reason of bring into harmony clauses of this standard, which pertain to safety rules for construction and installation of passenger and goods lifts and their essential changes, with harmonised european standards. ISO 1996-2:2009.


Page 55

Subsector : T16 Registration Date : 2013-04-18Organization : UNMZ Draft Issue Date : 2013-03-31Country : Czech Republic Latest Date for Comments : 2013-05-31Project ID : 27000813/0001 Project EstablishedICS :National Ref :Title : Safety rules for lifts - Testing and inspections of lifts in operationScope : Revision of this standard is made by reason of bring into harmony clauses of this standard,

which deal with testing and inspections of lifts in operation, with european harmonised standards.

Relatedness :National : REV/AMD ČSN 274007(2004)



Organization : UNMZ Draft Issue Date : 2013-03-31Country : Czech Republic Latest Date for Comments : 2013-05-31Project ID : 27000813/0001 Project EstablishedICS :National Ref :Title : Safety rules for lifts - Testing and inspections of lifts in operationScope : Revision of this standard is made by reason of bring into harmony clauses of this standard,

which deal with testing and inspections of lifts in operation, with european harmonised standards.

Relatedness :National : REV/AMD ČSN 274007(2004)

Subsector : T16 Registration Date : 2013-04-18Organization : UNMZ Draft Issue Date : 2013-03-31Country : Czech Republic Latest Date for Comments : 2013-05-31Project ID : 27000913/0001 Project EstablishedICS :National Ref :Title : Safety rules for lifts - Operation and service of liftsScope : Revision of this standard is made by reason of bring into harmony clauses of this standard,

which deal with saferty rules for lifts and its operation, with european harmonised standards.




Organization : UNMZ Draft Issue Date : 2013-03-31Country : Czech Republic Latest Date for Comments : 2013-05-31Project ID : 27000913/0001 Project EstablishedICS :National Ref :Title : Safety rules for lifts - Operation and service of liftsScope : Revision of this standard is made by reason of bring into harmony clauses of this standard,

Page 56

Scope : which deal with saferty rules for lifts and its operation, with european harmonised standards.


Subsector : T16 Registration Date : 2013-04-02Organization : MSZT Draft Issue Date : 2013-05-02Country : Hungary Latest Date for Comments : 2013-06-03Project ID : 34831545/0001 Project EstablishedICS : 91.140.90National Ref : MSZ 15698Title : Certain additional requirements of lifts, escalators and moving walks



Subsector T18: ELEVATING PLATFORMS

Subsector : T18 Registration Date : 2013-04-01Organization : AENORCountry : SpainProject ID : P0041138/0001 Project EstablishedICS :National Ref : PNE 58923Title : Mobile elevating work platforms (MEWP). Operator trainingScope : This Standard specifies the requirements and procedure for the training of Mobile Elevating

Work Platforms operator. It covers all the type Platforms included and manufactured according to EN 280.



Subsector T20: TRAM- AND RAILWAY ENGINEERING

Subsector : T20 Registration Date : 2013-04-26Organization : BSICountry : United KingdomProject ID : 01301295/0001 Project EstablishedICS :National Ref : BS 376-2Title : Railway signalling symbols. Part 2: Wiring symbols and written circuits



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

Documents

Monthly Notifications Register - iss.rs · European : Modified BS 1881-207:1992 Subsector : B02 Registration Date : 2013-04-11 Organization : TSE Country : Turkey Project ID : tst91945/0001