-
RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE
ALWUSA.COM
ETL Listed2108
MOONDISHRPD06/R2 | SUSPENDED, SURFACE
STANDARD SIZESRing diameters of 2, 3, or 4 feet
LAMPINGLED - 90+ CRI - 2700K/3000K/3500K/4000KOutput Options:
Standard/RGB/RGBWDimming down to 0%
FINISH18 standard finishes available at no extra chargeRAL
classic colors, TCI / Tiger Drylac catalog colors, and custom
colormatch also available
CONSTRUCTIONIndustrial Strength Extruded Aluminum Frame
-
RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE
ALWUSA.COM2 of 6
SS010720-A.0
PRODUCT SUBMITTAL WORKSHEET
1. BASE MODEL (CHOOSE ONE)
RPD06-R2PRPD06-R2S
Ceiling PendantCeiling or Wall Surface Mount
SAMPLE PRODUCT CODERPD06-R2P — D4 — 3500 — 0/10V/1% — LENS— BK —
BAL — UNV — EMB 1 2 3 4 5 6 7 8 9
3. LED LAMPING (CHOOSE ONE)
2700300035004000RGBRGBW
2700K (very warm)3000K (warm)3500K (slightly warm)4000K
(neutral)Red, Green, and Blue LEDRed, Green, Blue, and White
(4000K) LED
2. SIZE (CHOOSE ONE)
D2D3D4
2' (24") outer diameter3' (36") outer diameter4' (48") outer
diameter
SIZE DELIVEREDLUMENS (LM) WATTS (W)APPROX. WEIGHT
(LBS.)
D2 1547 lm 57W 10 lbs.
D3 2312 lm 85W 15 lbs.
D4 3201 lm 104W 20 lbs.
Performance data is measured at 3100K CCT.
4. REMOTE DRIVER (CHOOSE ONE .STD & RGB(W) TABLE INDICATES
COMPATIBLE LED LAMPING)
0/10V/S0/10V/1%0/10V/0%ECOSYS1LTEADMX
0-10V dimming down to 10% (Standard Dimming)0-10V dimming down
to 1%0-10V premium dimming down to 0%(L3DA) Lutron Hi-lume 1%
EcoSystem 24V LED DriverLutron Hi-lume 1% 2-wire TRIAC dimming
(120V forward-phase only), constant voltageDMX flicker-free dimming
down to 0%
*Driver specifications provided upon request.
●●●●●●
STD
RG
B(W
)
●
5. LENS
LENS Sandblasted clear lexan lens
-
RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE
ALWUSA.COM3 of 6
SS010720-A.0
8. VOLTAGE
UNV Universal Voltage (120VAC-277VAC)
9. EMERGENCY OPTIONS (OPTIONAL)
EMB Emergency Battery Pack
6. FINISH — EXTERIOR (CHOOSE ONE. SEE PAGE 5 FOR LARGER SWATCHES
AND ADDITIONAL INFORMATION)
BA Brushed Aluminum
STANDARD FINISHES
SPECIAL ORDER FINISHES
RAL____CAT____CCM____
Specify RAL Classic Color (Ex: RAL 3003) - Most RAL Colors are
available for powder coat. See www.alwusa.com/finishesSpecify
Catalog Colors - Specify colors from the Tiger Drylac and TCI
catalogsCustom Color Match - Specify a custom powder coat color
match
ALUMINUM
GW SW AWTWTB
Gloss WhiteSatin WhiteAntimicrobial Satin WhiteTextured Matte
WhiteTextured Matte Black
BASIC POWDER COAT
CSOBDBSB
Clear SilverOil-Rubbed BronzeDark BronzeSatin Black
SATIN ANODIZED EFFECT POWDER COAT
SGCGCUBR
Silver GrayCharcoal GrayCopperBrass
METALLIC POWDER COAT
GOGRGMGB
Orange (RAL 2003)Red (RAL 3020)Magenta (RAL 4010)Blue (RAL
5015)
GLOSS POWDER COAT (80-95% GLOSS)
7. FINISH — INTERIOR (CHOOSE ONE. SEE PAGE 5 FOR LARGER SWATCHES
AND ADDITIONAL INFORMATION)
BA Brushed Aluminum
STANDARD FINISHES
SPECIAL ORDER FINISHES
RAL____CAT____CCM____
Specify RAL Classic Color (Ex: RAL 3003) - Most RAL Colors are
available for powder coat. See www.alwusa.com/finishesSpecify
Catalog Colors - Specify colors from the Tiger Drylac and TCI
catalogsCustom Color Match - Specify a custom powder coat color
match
ALUMINUM
GW SW AWTWTB
Gloss WhiteSatin WhiteAntimicrobial Satin WhiteTextured Matte
WhiteTextured Matte Black
BASIC POWDER COAT
CSOBDBSB
Clear SilverOil-Rubbed BronzeDark BronzeSatin Black
SATIN ANODIZED EFFECT POWDER COAT
SGCGCUBR
Silver GrayCharcoal GrayCopperBrass
METALLIC POWDER COAT
GOGRGMGB
Orange (RAL 2003)Red (RAL 3020)Magenta (RAL 4010)Blue (RAL
5015)
GLOSS POWDER COAT (80-95% GLOSS)
https://www.alwusa.com/finisheshttps://www.tiger-coatings.us/https://www.tcipowder.com/https://www.alwusa.com/finisheshttps://www.tiger-coatings.us/https://www.tcipowder.com/
-
RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE
ALWUSA.COM4 of 6
SS010720-A.0
MECHANICAL DIAGRAMS
72 inches
Cable: One aircraft cable loops round the
stem to two swivel griplock grippers on
the fixture
LEDs: High performance LED
boards shine thru a sandblasted clear
lexan lens for perfect illumination.
RPD06 R2-P: Section A-A side cut view
RPD06 R2-S 4ft (48in)Seen here in white paint
RPD06 R2-S 2ft (24in)Seen here in silver paint
RPD06 R2-S 3ft (36in)Seen here in blue paint
RPD06 R2-P: bottom view
2 feet (24 inches)3 feet (36 inches)4 feet (48 inches)
0.625 inch Dia Stem
AA
1.625 inches
Interior & Exterior Surfaces: The inside surfaces can have a
color
difference than the exterior surfaces.
RPD06 R2-P: cut view
WIREGAUGE
D2 (White)57W
D2 (RGB/W)32W
D3 (White)85W
D3 (RGB/W)48W
D4 (White)52W (x2)
D4 (RGB/W)29W (x2)
18 AWG 50 ft. 34 ft. 35 ft. 20 ft. 25 ft. 38 ft.
16 AWG 85 ft. 59 ft. 55 ft. 36 ft. 40 ft. 66 ft.
14 AWG 130 ft. 98 ft. 90 ft. 63 ft. 65 ft. 109 ft.
12 AWG 210 ft. 162 ft. 140 ft. 105 ft. 105 ft. 179 ft.
10 AWG 335 ft. 262 ft. 220 ft. 172 ft. 170 ft. 290 ft.
MOONDISH VOLTAGE DROP CHART FOR REMOTE DRIVERS — 24VDCFor best
performance, ensure proper wire gauge is installed between the
remote LED driver and canopy that is dropping power to your
fixture. This chart only applies to RPD06/R2 at 24VDC. Do not use
this chart to calculate voltage drop for other fixtures. Estimated
9 Watts per linear foot (W/lf) for White LEDs, and 5 W/lf for
RGB/RGBW LEDs.
Dimension as reference D2 : 12.7 " D3 : 16 " D4 : 19.5 "
-
RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE
ALWUSA.COM5 of 6
SS010720-A.0
STANDARD FINISHES
ALUMINUM
BrushedAluminum
Standard finishes are available at no additional charge.
METALLIC POWDER COAT
SilverGray
CharcoalGray
Copper Brass
BASIC POWDER COAT
GlossWhite
SatinWhite
AntimicrobialSatinWhite
TexturedMatteWhite
GLOSS POWDER COAT (80-95% GLOSS)
OrangeRAL 2003
RedRAL 3020
MagentaRAL 4010
BlueRAL 5015
SATIN ANODIZED EFFECT POWDER COAT
ClearSilver
Oil-RubbedBronze
DarkBronze
SatinBlack
CS OB DB SB
SG CG CU BRGW SW
GO GR GM GB
TexturedMatteBlack
TB
SPECIAL ORDER FINISHES*
AW TW
Most RAL Classic Colors are available for a minimum setup fee.
On your specification submittal choose your RAL color by entering
the 4-digit RAL code (Ex: RAL 3003). See
www.alwusa.com/finishes
RAL CLASSIC COLORS (80-95% GLOSS): RAL_ _ _ _
The complete range of powder coat colors from Tiger Drylac and
TCI catalogs are available for a minimum setup fee. Consult ALW for
a catalog color you would like to specify.
CATALOG COLORS: CAT_ _ _ _
Custom powder coat color matching is available for a premium
setup fee. Consult ALW for additional information.
CUSTOM COLOR MATCH: CCM_ _ _ _
BA
*An individual setup fee will apply to each unique Special Order
Finish per purchase order. (ex: RAL 5023 and RAL 2008 are specified
for multiple line items on a purchase order. 2x setup fees will
apply)
https://www.alwusa.com/finisheshttps://www.tiger-coatings.us/https://www.tcipowder.com/
-
RPD06/R2 – SPECIFICATIONSSUSPENDED, SURFACE
ALWUSA.COM6 of 6
SS010720-A.0
LENS
Sandblasted clear lexan lens
HOUSING
100% recyclable, extruded architectural grade aluminum
SAFETY & REGULATORY ETL Listed (U.S. & Canada). Suitable
for dry or damp locations.Conforms to UL std. 2108, Low Voltage
Luminaires / Low Voltage Lighting Systems.Certified to CSA std.
C22.2#250.0:2008 Ed. 3+G1;G2.
OPERATING TEMPERATURE
Luminaire should be installed and operated ONLY in dry or damp
environments where the ambient temperature ranges from -4°F to
122°F ( -20°C to 50°C). Luminaire operation in environments outside
the listed temperature range voids the warranty AND may damage the
product or adversely impact lamp life, lumen output and color
consistency.
ADDITIONAL OPTIONS & SPECIFICATIONS
