Moulding Dentil

Special Order

Profiles below are a few of our

non-stock designs. See

www.bbwood.com for a complete list.

P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplarNot to Scale

32

DE171 3/4” X 2” Teeth 1”; Gap 3/4”

More Dentils pictured on pages 31-35.

DE168 P 1/2” x 1/2” Teeth 1/2”, Gap 1/4”

1/2”

DE169 P 3/4” x 1” Teeth 1”, Gap 3/8”

1”

DE170 P 5/8” x 1-1/2” Teeth 3/4”, Gap 3/8”

1-1/2”

BB1200 P-O-M-C 3/4” x 2” Teeth 1”, Gap 1/2”

2”

DE172 P 1/2” x 1-5/8” Teeth 1”, Gap 1/4”

1-5/8”

DE173 P 3/8” x 1” Teeth 7/8”, Gap 1/4”

1”

Dental Mould - Stock Profiles

Not to ScaleP = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplar 33

LCD8097 10 1/2” Drop x 6” ProjectionFeaturing CR800, DE171 (alt BB1200), B469

LCD8032 8” Drop x 5” ProjectionFeaturing CM83, DE169, CR65

LCD8090 9” Drop x 9” ProjectionFeaturing CR882, CDS1x4, S4S1x4, CM72, DE172, PM50

CDS1x4

LCD8031 9 3/8” Drop x 8 5/8” ProjectionFeaturing CM85, CDS1x4, S4S1x4, CM89, DE170, PM569

CDS1x4

Shipped Unassembled

Foracompletelistof LCD designs

Seewww.bbwood.com

Crown/Dentil Combinations

Special Order

Not to ScaleMouldings on this page are European Beech or similar Hardwoods

1381 3/8” x 3/4” x 34-1/2”1385 1/2” x 1-1/8” x 34-1/2”8-5/8” between knuckles

Turned Bamboo

Pearls also available in : 1/4”, 3/8”, 1/2”. Full rounds in 3/16”, 1/4”, 3/8”.

Special Beading

1702 5/16” x 5/8” x 34-1/2”

Rope

1703 3/16” x 3/8” x 48”1704 3/8” x 3/4” x 48”1705 1/2” x 1” x 48”

See page 27 for 8’ lengths of Rope and more sizes.

1711 1/2” x 1” x 48”Pattern repeats 11/16”

1712 3/16” x 1” x 48”Pattern repeats 1-3/8”


1701 3/16” x 3/8” x 34-1/2”

Pearl Beading


1715 1/4” x 1-1/4” x 48”Pattern repeats 3-1/4”

1707 5/16” x 11/16” x 48”Pattern repeats 1”

1708 3/8” x 3/4” x 48”Pattern repeats 1-9/16”

1709 3/8” x 5/8” x 48”Pattern repeats 5/8”

1716 3/16” x 1-1/2” x 48”Pattern repeats 7/8”

34

Carved Dentil & PanelCabinet Moulding -

Stock Profiles

Not to ScaleMouldings on this page are European Beech or similar Hardwoods

35








1732 1/4” x 1-3/8” x 48”Pattern repeats 2-3/4”




Carved Dentil & PanelCabinet Moulding -

Stock Profiles

Special Order





BB1164 P-O 5/8” x 2-1/4”

BB1163 P-O-M-C 1-1/16” x 3-1/4”

DH99 P1-1/16” X 5-1/4”

36

TC150 P 1-3/4” X 2-1/4” DH190 P 1-1/16” X 5-1/4”

TC150

DH190

DH190 & TC150 are sold separately

BB1165 P-O-M 3/4” x 3-1/4”

Embossed

Door Header & Cap - Stock Profiles

Rabbeted Stool - Stock Profiles

TC140 1” X 2-1/8” Bottom projection 1-1/16”

TC120 1” X 2-1/8” Bottom projection 1-5/8”

P = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplar

Special Order





1/2”

37

BB990 P-O-M-C 5/16” x 3-7/16”

Reversible - Beaded or V-Joint

Philadelphia Fence

Can be custom quoted in any width

Bead Board - Stock Profile

BB800 P-O 1-5/16” x 5-1/2”

Mantle Mould - Stock Profile

BB8200 O-M 1-3/4” x 5-3/4”

Bar Mould - Stock Profile

BR1CS O-P 1-3/4” x 6-1/4” Cut out for 1/2” Plywood

Cut out for 3/4” Plywood

MM187 P 1-1/4” x 4-3/8”

BR12WR 1-5/16” X 4-1/4”


38

PVC boards are stocked in 3/4” (18’0” long) & 1” (20’0” long). Widths range from 3-1/2” to 47-1/2”. Sheets also stocked in 4’0” x 9’0” in 3/8”, 3/4” & 1”.

S4S FLEX is available and shown on page 45.

Frames Jambs Oak Sill Brickmold

Oak Threshold

BB254 P-O-M-C1/2” x 3/4”

Parting Stop

BB265P-O-M-C

3/8” x 1-3/4”

BB267P-O-M-C

3/8” x 1-3/8”

Lattice

BB235 1-3/4” x 1-3/4”BB236 1-1/2” x 1-1/2”BB237 1-1/4” x 1-1/4”BB239 3/4” x 3/4”

P-O-M-C

Squares

BB956 1/4” x 2”BB957A 1/4” x 1-3/8”BB957 1/4” x 1-3/4”BB958 1/4” x 2-1/2”BB959 1/4” x 5-1/2”

P-O-M-C

Mullions

Boards are moulded on 4-sides (some current stock is surfaced 3-sides ripped 1 edge)S4S Boards - Stock

Frames, Jambs, Sills & Brickmould - Stock

Boards are stocked in: Special Order:Red Oak Mahogany Hard Maple Douglas FirPoplar Hickory Walnut SapeleSoft Maple Ash Alder European BeechCherry White Oak Knotty Alder

Lengths (depending on specie) are from 8’ to 16’. Thicknesses include 3/4”, 1-1/16”, 1-5/16” and 1-3/4”; Widths from 1-5/8”, 2-1/2”, 3-1/2”, 5-1/2”, 7-1/4”, 9-1/4” and 11-1/4” (11-1/4” boards may be glued up in some species). All species are not stocked in all sizes. Custom sizes are available.


Special Order





BB145P-O

3/8” x 7/16”

BB146P-O

3/8” x 11/16”

BB147P-O-M-C

1/2” x 9/16”

BB148P-O-M

1/2” x 11/16”

BB132P-O-M

5/8” x 3/4”BB144 P-O-M-C7/16” x 19/32”

BB149 P-O-M-C 13/32” x 11/32”

PM537 P1/2” x 1/2”

39

BB100 P-O-M-C11/16” x 11/16”

Cove

BB129 P-O-M-C7/16” x 11/16”

BB21 F

Shoe

BB918 P-O-M-C9/16” x 1-1/16”

Stringer

BB205P-O-M-C

1-1/8” x 1-1/8”

BB206P-O-M-C3/4” x 3/4”

OS102 P13/16” x 1 3/8”

OS101 P13/16” x 13/16”

Outside Corner

BB160 P-O-M-C9/16” x 1-3/16”

Head Mould

BB105 P-O-M-C3/4” x 3/4”

QuarterRound

BB120 P-O1/2” x 1”

BB123 P-O5/16” x 5/8”

HalfRound

BB142 P-O-M-C1/4” x 3/4”

Screen

Glass Beads/Panel Mould

1/4”BC2CS 1” x 2”

13/16”

1-1/16” x 2-1/4”BC3CS

Panel Mold

B8095 O 1/2” X 3/4”

BB204 1-1/8” X 1-1/8”

PM530 P 3/4” x 1-1/8”

PM561 P 3/4” x 3/4”

Full Round

MLD series 8’ long

MLD5824 M-C1/2” x 1”

MLD5822 M-C3/4” x 1-1/2”

MLD5820 M-C1” x 2”

PM586 P3/4” x 1-1/2”


Special Order

PB192 P-O3” x 5”

PB193 P-O4” x 7”

PB185 P-O4-1/2” x 8”

PB186 P-O5-1/2” x 8”

Above Blocks 9-1/4” HP-O-M-C

B238 15/16” x 2-3/8”B258 15/16” x 2-5/8”B358 1-1/8” x 3-5/8”B4 1-1/8” x 4”B538 1-1/8” x 5-3/8”

PB171 P-O3” x 5”

PB170 P-O4” x 7”

PB183 P-O4-1/2” x 8”

PB187 P-O5-1/2” x 8”

40

CB1 Allow 4” over base height. For bases up to 3/4” thick

CB2 Allow 4” over base height. For bases up to 1” thick

CB3 Allow 2-3/4” over base height.For bases up to 1-1/8” thick

CB4 Allow 2” over base height. For bases up to 1-1/8” thick

B-series base blocks can be ordered with

a circle design. Specify B#-CIR

Base/Plinth Blocks - Stock Profile

Top View

Inside Corner (IC)

Outside Corner (OC)

for use with 3/4” radius drywall

P-O

R610 (BB610, BB614) P-O R620 (BB620, BB622) P-OLBR001 P (accepts bases up to 3/4” x 8”)

Base Corner Blocks

Base Corners

Model Base Block Size HeightIC/OC-35 3½” 4”IC/OC-42 4¼” 4¾”IC/OC-55 5½” 6”

Custom Corners Standard & 3/4” Radius



Special Order

for use with BB356 Casing

41

E6

E2

E-8

E1

E-SQ

ROS162 P-O 1” x 2-3/4”

ROS169 P-O 1” x 3-1/2”

ROS160 P-O 1” x 3-3/4”

ROS158 P-O 1” x 4”

ROS164 P-O 1” x 4-1/2”

ROS165 P-O 1” x 5-1/2”

ROS161 P-O 7/8” x 2-3/4”

ROS159 P-O 7/8” x 3-1/2”ROS163 P-O

7/8” x 3-3/4”

ROS166 P-O 1” x 3-3/4” x 5-3/4”ROS167 P-O

1” x 4-1/2” x 6-1/2”ROS168 P-O

1” x 5-1/2” x 7-1/2”

C538-C 1-1/8” x 5-3/8”

P-O-M-C

Corner Blocks - Stock Profile

P-O-M-C

C358-C 1-1/8” x 3-5/8”C4-C 1-1/8” x 4”

P-O-M-C

C238-C 15/16” x 2-3/8”C258-C 15/16” x 2-5/8”

P-O-M-C

P-O-M-C

For PLAIN “C” series with edge detail only.

Specify (-P). ex. C538-P

Blocks are made as shadow corners (made thicker & wider than casing). Call for quote for blocks that match casing.

R356 P-O 11/16” x 2-3/8” for use with BB371 Casing

R371 P-O 11/16” x 2-5/8”for use with BB371 Casing

R445 P-O 11/16” x 3-3/8”for use with BB445 Casing

Rainbow Corner Blocks

Special Order





D

C

BA

KEY 034 Resin Keystone

Available in standard and Oak Grain B=4”;

C=6-1/2”; D=8” will fit casings up to 1-1/2” x 4-1/2” to 7”

Fits casings up to 1-1/2” x 4” to 5-1/2”

A=1”; B=2”; C=4”; D=4-1/2”

A=1”; B=2-1/2”; C=4-1/2”; D=5”

A=1-3/4”; B=3”; C=5-1/2”; D=6”

Key 031 P-O

Key 032 P-O

Key 033 P-O

Fits casings up to 13/16” x 2-1/2” to 3-1/2”

Fits casings up to 13/16” x 3-1/2” to 4”

42

CRV5127 2-1/2" x 8" x 9-1/2"accepts casings up to 6-1/2" wide

Stock Urethane KeystonesK6: A=1-7/8; B=2-3/4; C=4-1/2; D=6-3/8K7: A=2-1/2; B=4; C=5-7/8; D=7-1/4K8: A=1-1/4; B=5-3/4; C=9-3/4; D=7-3/4K11: A=2-3/4; B=6-1/4; C=8-1/4; D=10-7/8K12: A=1-1/4; B=6; C=12; D=11-3/4K14: A=3; B=6; C=11-3/4; D=14

Keystones - Stock Profile

Special - MiterLESS Parts

Crown (Pinch) Blocks - for CR810 & CR800

KEY with CIRCLE

KEY with FLUTES

Crown Radius Inside Corner

Crown Radius Outside Corner

Special Order




Not to ScaleP = Poplar O = Red Oak C = Cherry M = Soft Maple F =PrimeFJPoplar

Crown (Pinch) Blocks - for CR810 & CR800

SCB will accept the following crowns (also can be made with these crowns for extra cost):Embossed: CM70; CM71; CM72; CM74; CM77; CM81; CM85; CM87Plain: CR810; CR820; CR864; CR866; CR872; CR881; CO707

LCB will accept the following crowns (also can be made with these crowns for extra cost):Embossed:CM73; CM75; CM76; CM80; CM82; CM83; CM84; CM86Plain: CR800; CR806; CR830; CR841; CR860; CR862; CR880, CO705

A = crown height; B = block height; C = total height; D = Projection from wall

LCB - Large Crown Blocks with CR800A B C D Face

LCB040 Inside Corner 5-1/2 6 11-1/2 4-1/2 -LCB041 Outside Corner 5-1/2 6 11-1/2 4-1/2 9LCB042 Center 5-1/2 6 11-1/2 4-1/2 9

SCB - Small Crown Blocks with CR810A B C D Face

SCB045 Inside Corner 3-3/4 4-1/4 8 3-1/4 -SCB046 Outside Corner 3-3/4 4-1/4 8 3-1/4 6-1/2SCB047 Center 3-3/4 4-1/4 8 3-1/4 6-1/2

43

Carved Crown Block

CRV5095 5-1/2" x 5-1/2" x 12-1/8"Accepts crowns 5-1/4 to 7-1/2"

CRV5099 3-1/2" x 3-1/2" x 8-1/2"Accepts crowns up to 5"

CUSTOM

Your Choice

of crown and block

size

SCB

CR810

LCB

B

A

C

D

CR800

Crown (Pinch) Blocks - for BB40, BB46, BB49

CP (center)IP (inside) OP (outside)

Current stock (not pictured) has a generic crown. A running change will make Size 3 with BB49, Size 5 with BB46 and Size 7 with BB40. Chart below reflects the new blocks that will be made.

A B C D Face Accepts up to

IP3 Inside Corner 2-7/8" 2-5/8" 5-1/2" 2-7/8"OP3 Outside Corner 2-7/8" 2-5/8" 5-1/2" 2-7/8" 5-3/4"CP3 Center Room 2-7/8" 2-5/8" 5-1/2" 2-7/8" 5-3/4"

IP5 Inside Corner 3-11/16" 4" 7-11/16" 4-1/16"OP5 Outside Corner 3-11/16" 4" 7-11/16" 4-1/16" 8-1/8"CP5 Center Room 3-11/16" 4" 7-11/16" 4-1/16" 8-1/8"

IP7 Inside Corner 5" 5-3/16" 10-3/16" 5-13/16"OP7 Outside Corner 5" 5-3/16" 10-3/16" 5-13/16" 11-5/8"CP7 Center Room 5" 5-3/16" 10-3/16" 5-13/16" 11-5/8"

3-5/8” Crown

5-1/4” Crown

7-1/4” Crown

Flexible Resin Mouldings for Curved Applications

II. Crown MouldingsA. Is face of crown convex or concave?B. Indicate radius of curved wall to face of sheet rock. Alternate: Specify width of curve (B) & depth of curve (A)C. Indicate length of Mould (sold by the foot) - Min. 5’ long; Max. 12’ per piece for most profiles

D. Specify Oak Grain or No Grain (check availability)E. Which side of crown is against wallF. Crown resin is not returnable

44

A. Indicate Length of Molding (sold by the foot) - Min. 5’ long; Max. 12’ per piece for most profilesB. Specify type of curve (Half Circle, Eyebrow, Ellipse, Gothic, Oval or Round) C. Half Circle-Specify Radius; Eyebrow (segment): Specify height & width of arch. All other designs require a template.

I. Casing - by the Lineal Foot

D. Specify Oak Grain or No Grain (all molds are not available in both grain and no-grain )E. Order wood Corner blocks. (Mitered Flex to Wood casing may not exactly match)F. Many more profiles are available than are shown on the preceding pages. See our web site for a complete list.

INSIDERADIUS

OVAL

PAPER or CARD BOARD TEMPLATE NEEDEDLength = Measure Template

WIDTH

(SEGMENT)

B

A

Interior or Exterior Applications

FLEX is a high density polyurethane resin with a cellular composition structure similar to wood and may be handled the same as wood. FLEX is made in two formulations. Original FLEX is priced in our catalog. ZFlex is an upgrade which is stronger, more durable and offers greater flexibility. Pricing is by quote. Either may be used in interior or exterior applications. FLEX is pre-primed for superior paint and stain adhesion. Many of the profiles are available in long lineal footage. Small, non-radius profiles up to 2” wide can be ordered up to 100’ lengths. Profiles up to 3-1/2” wide are available up to 75’ lengths. Profiles not available in long lineal are mostly available in 12’ lengths with some exceptions. FLEX has an excellent memory. After laying on a flat surface for a short pe-riod of time, depending on temperature, it will return to the shape in which it was originally molded, allowing for ease of installation.

III. Baseboards, Shoe, Chair Rails & DentilA. If resin baseboards, chair rails or dentils are being used as a base or below crown moulding on a wall, then they do not need to be precast to any radius. They are sold as “straights” and only lineal footage is needed.

B. Indicate length (sold by the foot) - Min. 5’ long; C. Specify Oak Grain or No Grain (check for availability)

STOCK LIST BB610 & BB620 No Grain BB105* & BB100* No Grain BB129* No Grain & Oak BB299 No Grain BB907 No Grain *these profiles are not an exact match to our wood profiles

Finishing Flex Mouldings

Flexible Resin Mouldings for Curved Applications

45

Finishing Flex MouldingsTo Paint Wipe surface clean with paint thinner or mild solvent. Sand lightly. If using filler use hard plastic resin filler and sand. Do not paint before installation. All paints work well. To Stain

Stain-Grade is the same composition as the smooth paint grade. The wood grain pattern allows FLEX to be finished to match wood mouldings in various hardwoods. Gelled stains or those with heavy pigments work best. Some traditional wood stains will not provide a quality job. We strongly recommend that first-time users practice on a piece of scrap FLEX before applying a finished coat. 1. Clean surface prior to staining2. Fill nail holes prior to staining with resin filler.3. Wipe on stain and remove excess with cloth and dry brush color light or dark.4. Clear coat over stain using spray application only.5. Do not brush or sand between coats.6. Achieving light natural wood colors may require stain tinting and glazing techniques.

V. Backbands A. Indicate diameter or radius of main casing and type of curve.B. Indicate length of Mould (sold by the foot) - Min. 5’ long; Max. 12’ per piece for most profilesC. Specify Oak Grain or No Grain (check for availability)

IV. S4S

S4S - may be used in curved jamb, baseboard or chair rail applications. For radius S4S see bbwood.com for sizes.No Grain is available up to 2” thick (minimum 3/8”), 12” wide (mini-mum 1/2” wide) and 12’0” long. Order widths and thicknesses in 1/16” increments. Please call for a quote for Oak grain sizes that are not listed below. STOCK SIZES S4S:

3/4 X 2 (no grain & oak grain)3/4 X 4 (no grain & oak grain)3/4 X 4½ (no grain only)3/4 X 5¼ (no grain & oak grain)3/4 X 6-9/16 (no grain only)

A. Specify Thickness,Width, Length (min 5’)

Order widths and thicknesses in 1/4” increments. Thickness other than 1/4” increments can be quoted for an additional milling charge. Special Order. Machinable Blanks - may be run through your moulder. No Grain only: Available up to 2” thick (min 1/2”), 12” wide (min 2” wide) and 5’ to 12’0” long. Call for quotation.

CONVEXViewed on a flat surface

CONCAVEViewed on a flat surface

All flexible mouldings are sensitive to tem-perature. At temperatures below 70 degrees, the mould-ing will become more rigid. At temperatures above one hundred degrees, the material will soften and tear more easily than normal. Once installed, the product will not be affected by extreme temperatures. Extra care is advisable when installing at very high or low tempera-tures. Flex Mouldings can be nailed without pre-drill-ing.It is necessary to use a quality construction adhesive before nailing. Run a continuous line of adhesive when applying. When parts are received at the job site they should be removed from the carton, bent backwards and put in the sun, heated room or oven. FLEX parts have an excellent memory. After thirty to forty-five minutes the part will return to the shape it was originally formed and be easier to install. When flattened, base and case mouldings are easy to identify. Crown mouldings have proven to be confusing for the first time user. Below you will find a drawing showing how to tell concave from convex pre-formed crown mouldings. Concave pre-formed crown mouldings appear to be formed upside down. Upon installation you will discover they are made correctly and will fit properly. • Using adhesive, mastic or resin epoxy glue alone pro-duces best fastening results• The best fastening way is to nail through a block of wood placed over face of moulding and remove nail and block after adhesive cures• Surface protrusion defects can occur if nails are paced too close to edges.• Surface depression defects can occur if nails are not deep enough or at least 1/3 of material thickness depth.• Glue joints with any fast cure resin or epoxy glue• Do not use wood glue• Repair cracks or breaks with epoxy glue

Installation Instructions

For a convex application the detail going against the wall will be on the bottom of the arch, when viewed as illustrated below.

For a concave application the detail will be on the top of the arch, when viewed as illustrated below.

Special Order




Not to Scale

Urethane Mouldings - Interior or Exterior: Stock

MLD207-16 1” x 5-1/4” x 16’0”

MLD220-12 1-3/4” x 5-1/2” x 12’0”

MLD224-12 1-1/2” x 5-1/2” x 12’0”

MLD226-16 1-1/2” x 5-1/2” x 16’0”

MLD231-12 1” x 1-3/4” x 12’0”

MLD246-16 3-3/8” x 9-1/8” X 16’0”

MLD208-16 1” x 7-1/4” x 16’0”

Urethane mouldings have an exterior grade white primer paint with a built-in ultraviolet stabilizer. May be painted with any good quality latex or oil base paint. One coat is typically all that is needed.

Cut and trim with typical woodworking tools. Install similar to any premium wood trim with these exceptions. To minimize expansion/contraction cut moulding 1/4” longer for each 10’ of length. Use butt joints on seams and miter joints at the corners. Do not store in extreme heat. Acclimate before installation (at least 10 hours)

Use a top quality, urethane construction adhesive such as PL Premium Adhesive for installation. Use on all joints (covering the joints completely) and along the back of the moulding. Use corrosion-resistant mechanical fasteners (nails or screws) and fasten every 16” or less for exterior applica-tions. Countersink fasteners about 1/8” and fill with exterior grade white spackle. Finish Exterior installations using a quality exterior grade silicone caulk to prevent water infiltrations behind siding, windows and doors. J-channel and/or flashing may be required to prevent water infiltration. Installers must determine which installation technique is best for their situation. Wood or automotive filler can be used to fill dents or gashes. Check local building codes for altered installation procedures.

MLD247-16 1-3/8 x 8-11/16” X 16’0”

MLD215-121-3/4” x 3-1/2”

MLD227-161-1/2” x 9”

46

Special Order




Not to Scale

MLD331-16 1-5/8” x 9-1/2” X 16’0”

2-1/4” Tooth & Space

MLD333-12 1-3/16” x 11-1/2” X 12’0”


MLD355-8 5/8” x 2-1/2” x 8’0”

1-3/8” Tooth; 3/4” Space

MLD350-8 7/8” x 3-1/2” x 8’0”

2-3/16” Tooth; 1-1/2” Space

MLD351-8 1-1/4” x 3-1/4” x 8’0”


MLD335-12 3-3/8” x 6-1/8” x 12’0”

3-11/16” Tooth; 3-9/16” Space

MLD303-5 5/8” x 1-1/4” x 5’0”

3/4” Tooth & Space

MLD310-16 1-1/4” x 4-1/2” x 16’0”


MLD313-8 2-1/4” x 2-3/8” x 8’0”

1” Tooth & Space

MLD320-16 1-5/8” x 5-3/4” x 16’1”


MLD330-12 1-5/8” x 7” x 12’0”

2” Tooth & Space

MLD304-8 5/8” x 1-1/4” x 8’0”


47

MLD332-81-5/8” x 5”

MLD336-163-1/8” x 9-3/8”

Pitched Dentil MLD310 in 9/12, 10/12,

12/12; MLD320 in 10/12; MLD330 in 10/12;

MLD351 in 10/12, 12/12


Special Order




Not to Scale

MLD542-16 2-3/4” x 5-1/2” x 16’0”

MLD527-16 3-1/2” x 7-1/2” x 16’0”

MLD460-12 4-3/8” x 5-1/8” x 12’0”

MLD456-16 3” x 4-7/16” x 16’0”

MLD454-12 3-25/32” x 3-15/16” x 12’0”

MLD453-16 4-11/16” x 6-11/16” x 16’0”

MLD452-12 2” x 3” X 12’0”

MLD410-12 3-3/4” x 6-7/8” X 12’0”


MLD406-16 3-3/8” x 4” x 16’0”

3/4” Tooth; 1-1/4” Space

MLD404-16 2-1/2” x 3-3/4” x 16’0”

3/4” Tooth & Space

MLD253-162-3/8” x 7-5/8”

48

MLD561-121-1/2” x 3-1/4”


Special Order




Not to Scale

MLD626-8 1-1/32” x 1-3/16” X 8’0”

MLD618-16 15/16” x 1-9/16” X 16’0”

MLD612-12 3/4” x 1-3/8” x 12’0”

MLD611-12 1-1/8” x 2-1/4” x 12’0”

MLD648-16 1-1/2” x 1-1/16” x 16’0”

MLD570-12 5-1/2” x 6-7/8” X 12’0”

MLD552-12 2-1/8” x 3-7/16” X 12’0”

MLD610-8 1-1/2” x 2-3/8” x 8’0”

MLD602-8 13/16” x 13/16” x 8’0”

MLD603-8 1/2” x 1/2” x 8’0”

49

MLD230-163/4” x 3-1/4”

MLD244-121-5/16” x 5-5/8”

MLD250-8,121-3/4” x 4-1/2”


NUMERICAL INDEX

50

Item Page

1381 34

1385 34

1701 34

1702 34

1703 34

1704 34

1705 27

1705 34

1707 34

1708 34

1709 34

1710 34

1711 34

1712 34

1713 34

1715 34

1716 34

1718 35

1719 35

1722 35

1723 35

1724 35

1730 35

1731 35

1732 35

1733 35

1734 35

1766 35

B15CS 11

B17CS 11

B238 40

B258 40

B358 40

B4 40

B400 11

B401 12

B435 10

B442 12

B462 12

B464 12

B468 11

B4CS 12

B538 40

B7CS 11

BA42 13

BA43-C 13

BA44 13

BA46 13

BA47 13

BB15 9

BB16 9

BB17 9

Item Page

BB18 9

BB21 39

BB40 20

BB45 17

BB46 18

BB49 16

BB54 16

BB75 16

BB95 39

BB100 39

BB102 4

BB105 39

BB120 39

BB123 39

BB129 39

BB132 39

BB142 39

BB144 39

BB145 39

BB146 39

BB147 39

BB148 39

BB149 39

BB150 27

BB152 27

BB153 9

BB154 27

BB155 9

BB156 27

BB160 39

BB204 39

BB205 39

BB206 39

BB219 26

BB220 10

BB235 38

BB236 38

BB237 38

BB239 38

BB254 38

BB265 38

BB267 38

BB278 9

BB280 9

BB282 9

BB283 9

BB297 14

BB299 14

BB300 14

BB312 10

BB324 4

BB340 4

Item Page

BB350 14

BB356 4

BB361 4

BB371 4

BB400 8

BB400 15

BB412 8

BB445 4

BB448 4

BB450 7

BB460 4

BB471 4

BB472 4

BB475 7

BB480 5

BB490 5

BB500 7

BB575 7

BB610 11

BB614 10

BB620 10

BB622 10

BB640 11

BB645 12

BB664 10

BB675 11

BB685 4

BB695 11

BB700 11

BB714 10

BB750 5

BB750 11

BB753 5

BB753 10

BB775 12

BB800 37

BB886 8

BB907 8

BB918 39

BB956 38

BB957 38

BB957A 38

BB958 38

BB959 38

BB990 37

BB1163 36

BB1164 36

BB1165 36

BB1200 32

BB7613 12

BB7615 12

BB8109 9

Item Page

BB8110 9

BB8111 9

BB8120 9

BB8122 9

BB8200 37

BC2CS 39

BC3CS 39

BOARD 38

BR1CS 37

C238-C 41

C258-C 41

C358-C 41

C4-C 41

C538-C 41

CA30 6

CA31 6

CA33 6

CA36 6

CA37 6

CA38 6

CA39 6

CA40 6

CA41 6

CA300 4

CA302 5

CA323 7

CA325 7

CA326 7

CA327 7

CA328 8

CA329 8

CA335 4

CA342 5

CA344 5

CA360 5

CA363 5

CA368 5

CA380 5

CA388 5

CA8320 6

CA8322 6

CA8338 6

CB1 40

CB2 40

CB3 40

CB4 40

CDS1X4 33

CH5CS 15

CH610 14

CH640 14

CH650 14

CH659 14

Item Page

CH690 14

CH693 15

CH7CS 15

CH8CS 15

CM69 17

CM70 17

CM71 17

CM72 17

CM73 19

CM74 17

CM75 19

CM76 19

CM77 17

CM80 19

CM81 17

CM82 19

CM83 19

CM84 19

CM85 17

CM86 19

CM87 19

CM88 17

CM89 17

CM90 19

CM91 17

CM8801 21

CM8808 21

CM8810 21

CM8812 21

CM8820 21

CM8823 21

CM8825 21

CM8830 21

CM8834 21

CM8837 21

CM8840 21

CM8850 21

CM8852 21

CM8854 21

CM8856 21

CM8857 21

CM8858 21

CM8859 21

CM8860 21

CO705 18

CO707 16

CO730 16

CP-3 43

CP-5 43

CP-7 43

CR61 15

CR63-A 15

Item Page

CR64 15

CR65 15

CR66 15

CR67 14

CR68 9

CR69 14

CR800 20

CR810 17

CR820 16

CR830 18

CR840 16

CR841 20

CR850 16

CR860 20

CR862 19

CR864 19

CR866 17

CR872 16

CR880 18

CRV5095 43

CRV5099 43

CRV5127 42

CSCR59 20

DE168 32

DE169 32

DE170 32

DE171 32

DE172 32

DE173 32

DH190 36

DH99 36

DS110 8

DS111 8

E1 41

E2 41

E6 41

E8 41

E-SQ 41

FR8920 23

FR8921 23

FR8922 23

FR8923 23

FR8940 23

FR8950 23

FR8953 23

FR8954 23

FR8955 23

FR8956 23

FR8957 23

FR8960 23

FR8965 23

FR8967 23

51

FR8968 23

FR8970 23

FR8971 23

HABA062 12

HABA066 12

HABA218 12

HABA264 12

HABA304 12

HACA052 4

HACA082 4

HACA091 5

HACA101 11

HACA115 7

HACA134 5

HACA221 4

HACA288 5

HACA305 7

HACA346 4

HAMA165 26

IC/OC-35 40

IC/OC-42 40

IC/OC-55 40

IP-3 43

IP-5 43

IP-7 43

K11 42

K12 42

K14 42

K6 42

K7 42

K8 42

KEY 031 42

KEY 032 42

KEY 033 42

KEY 034 42

LBR001 40

LCB040 43

LCB041 43

LCB042 43

LCD8031 33

LCD8032 33

LCD8097 33

LCD8090 33

LM90 24

LM91 24

LM92 24

LM93 24

M312 5

M313 7

M3TB 4

MA20 4

MA30 5

MD4316 17

Item Page

MLD207-16 46

MLD208-16 46

MLD215-12 46

MLD220-12 46

MLD224-12 46

MLD226-16 46

MLD227-16 46

MLD230-16 49

MLD231-12 46

MLD244-12 49

MLD246-16 46

MLD247-16 46

MLD250-8,12 49

MLD253-16 48

MLD303-5 47

MLD304-8 47

MLD310-16 47

MLD313-8 47

MLD320-16 47

MLD330-12 47

MLD331-16 47

MLD332-8 47

MLD333-12 47

MLD335-12 47

MLD336-16 47

MLD350-8 47

MLD351-8 47

MLD355-8 47

MLD404-16 48

MLD406-16 48

MLD410-12 48

MLD452-12 48

MLD453-16 48

MLD454-12 48

MLD456-16 48

MLD460-12 48

MLD527-16 48

MLD542-16 48

MLD552-12 49

MLD561-12 48

MLD5610 27

MLD5612 27

MLD5614 27

MLD5616 27

MLD570-12 49

MLD5800 27

MLD5802 27

MLD5804 27

MLD5810 27

MLD5812 27

MLD5814 27

MLD5820 39

NUMERICAL INDEXItem Page

MLD5822 39

MLD5824 39

MLD5840 22

MLD5842 22

MLD5844 22

MLD5846 22

MLD5848 22

MLD5860 22

MLD5864 16

MLD5866 16

MLD5900 24

MLD5902 24

MLD5903 24

MLD5910 24

MLD5912 24

MLD5914 25

MLD5916 25

MLD5918 25

MLD5920 25

MLD5922 24

MLD5924 25

MLD5926 25

MLD5928 25

MLD5940 31

MLD5942 31

MLD5944 31

MLD5946 25

MLD5949 31

MLD5950 31

MLD5952 31

MLD5954 31

MLD5956 31

MLD5958 25

MLD5960 31

MLD5962 24

MLD5964 31

MLD5966 31

MLD5968 31

MLD5970 31

MLD5972 31

MLD5976 31

MLD5978 31

MLD5979 31

MLD5980 31

MLD5982 31

MLD5986 31

MLD6000 31

MLD6002 31

MLD6004 31

MLD6005 31

MLD602-8 49

MLD603-8 49

Item Page

MLD610-8 49

MLD611-12 49

MLD612-12 49

MLD618-8 49

MLD626-8 49

MLD648-16 49

MM187 37

OP-3 43

OP-5 43

OP-7 43

OS101 39

OS102 39

PB170 40

PB171 40

PB183 40

PB185 40

PB186 40

PB187 40

PB192 40

PB193 40

PM07 28

PM08 28

PM09 28

PM10 28

PM11 28

PM12 28

PM14 28

PM20 28

PM22 28

PM22-PL 13

PM22-PL 28

PM23-B 28

PM24 28

PM25 29

PM26 29

PM27 29

PM28 29

PM29 29

PM50 29

PM52 29

PM54 29

PM55 29

PM57 29

PM58 29

PM59 29

PM70 29

PM71 29

PM72 29

PM73 29

PM74 29

PM484 27

PM485 26

Item Page

PM486 27

PM490 27

PM492 27

PM494 27

PM495 27

PM500 27

PM505 26

PM511 26

PM525 26

PM526 26

PM529 26

PM530 39

PM535 26

PM537 39

PM539 26

PM561 39

PM56-B 29

PM570 26

PM580 26

PM586 39

PM590 26

PM593 26

PM597 26

PM8511 30

PM8520 30

PM8522 30

PM8523 30

PM8524 30

PM8525 30

PM8528 30

PM8532 30

PM8535 30

PM8536 30

PM8540 30

PM8541 30

PM8545 30

PM8546 30

PM8552 30

PM8553 30

PM8555 30

PM8557 30

PM8558 30

PM8560 30

PM8561 30

PM8564 30

PM8565 30

PM8568 30

PM8569 30

PM8572 30

R356 41

R371 41

R445 41

Item Page

R610 40

R620 40

RB3 5

RE104 27

RE107 27

Rope038 27

Rope012 27

Rope034 27

Rope100 27

Rope114 27

Rope112 27

Rope200 27

Rope214 27

Rope300 27

Rope400 27

ROS158 41

ROS159 41

ROS160 41

ROS161 41

ROS162 41

ROS163 41

ROS164 41

ROS165 41

ROS166 41

ROS167 41

ROS168 41

ROS169 41

SCB045 43

SCB046 43

SCB047 43

TC120 36

TC140 36

TC150 36

Documents

Moulding Dentil