MOVITRANS® / System Descriptions / 2011-02The THM pick-ups transfer the energy contactlessly from the line cable to the TPM mobile converter. Different mechanical designs and electrical

Drive Technology \ Drive Automation \ System Integration \ Services

System Description

Contactless Energy TransferMOVITRANS®

Edition 02/2011 17079217 / EN

SEW-EURODRIVE—Driving the world

System Description – MOVITRANS® 3

Contents

Contents1 Introduction ......................................................................................................... 4

1.1 What is MOVITRANS®?.............................................................................. 41.2 System benefits .......................................................................................... 41.3 Areas of application .................................................................................... 41.4 Theory of operation..................................................................................... 6

2 Technical Description of the MOVITRANS® Components .............................. 82.1 MOVITRANS® TPS stationary converter .................................................... 82.2 MOVITRANS® TAS transformer module .................................................... 92.3 MOVITRANS® TLS line cable................................................................... 102.4 MOVITRANS® TLS supply cable .............................................................. 112.5 MOVITRANS® TIS installation plate ......................................................... 122.6 MOVITRANS® TIS profile section system ................................................ 132.7 MOVITRANS® TCS compensation box .................................................... 142.8 MOVITRANS® TVS connection distributor ............................................... 152.9 MOVITRANS® THM pick-ups ................................................................... 162.10 MOVITRANS® TPM mobile converter ...................................................... 18

3 Overview and functions of the MOVITRANS® components.......................... 193.1 Stationary components ............................................................................. 193.2 Mobile components................................................................................... 213.3 Installation equipment .............................................................................. 22

4 Regulations, certifications and standards...................................................... 254.1 CE marking ............................................................................................... 254.2 UL approval............................................................................................... 254.3 Electromagnetic compatibility (EMC) ........................................................ 254.4 Electromagnetic fields (EMF).................................................................... 26

5 Application examples ....................................................................................... 295.1 Conveyor trolleys ...................................................................................... 295.2 Push-skid conveyor system ...................................................................... 305.3 Floor conveyor system (FCS) / automated guide vehicle system (AGV).. 315.4 Overhead trolley system ........................................................................... 32

6 External Communication.................................................................................. 346.1 Data light barriers...................................................................................... 346.2 Radio systems .......................................................................................... 36

7 Documentation ................................................................................................. 387.1 Available documentation .......................................................................... 387.2 Additional documentation.......................................................................... 38

8 Address List ...................................................................................................... 39

4

1 hat is MOVITRANS®?troduction

1 Introduction1.1 What is MOVITRANS®?

MOVITRANS® is a system consisting of stationary and mobile components that contact-lessly supplies energy to mobile electrical consumers.

The required energy is transferred inductively (without contact) from an insulatedstationary conductor to the mobile consumers (vehicles) via an air gap.

1.2 System benefitsMajor advantages of the MOVITRANS® contactless technology compared to thetraditional method of energy transfer:

• Wear-free energy transfer– Components are not subject to wear and do not require maintenance

• Isolated cables– Cables are not impaired by contamination, moisture or temperature.

• High mechanical tolerances– More flexible design with curves and points.

– High speeds due to contactless energy supply.

– Simple track segmentation

1.3 Areas of application1.3.1 Requirements

Contactless supply systems are preferably used instead of the traditional methods ofenergy transfer

• when the mobile equipment has to cover long distances,

• when a variable, extendable track layout is required

• when energy has to be transmitted at high speeds

• when the energy transfer has to be maintenance-free

• when operation takes place in wet and humid areas

• when additional environmental contaminants are not permitted in sensitive areas

WIn

System Description – MOVITRANS®

1Areas of applicationIntroduction

1.3.2 Areas of application today

The MOVITRANS® system is preferably used in materials handling technology inthe following sectors:• Automotive industry

• Transportation and storage logistics

• Sorting technology

1.3.3 Typical applicationsThe MOVITRANS® system is preferably used in following applications:• Conveyor trolleys

• Push-skid conveyor systems

• Guided floor conveyor systems

• Automated guided vehicle systems

• Storage and retrieval units

• Overhead trolley systems

• Pallet transportation systems

• Baggage handling systems

• Panel gantries

• Elevator technology (construction elevators, electrical supply for elevators)

• Rides in amusement parks

• Battery charging stations

5

6

1 heory of operationtroduction

1.4 Theory of operation1.4.1 Energy transfer

Electrical energy is transferred without contact from a fixed conductor to one or moremobile consumers. The principle of inductive energy transfer is used in the process. Theelectromagnetic connection is made via an air gap and is not subject to wear, making itmaintenance-free.

1.4.2 System overviewThe MOVITRANS® system is divided into stationary and mobile components:

1.4.3 Stationary components [A]• MOVITRANS® TPS stationary converter [1]

The TPS converter, which is based on the MOVIDRIVE® series, converts theincoming low frequency alternating voltage (50/60 Hz) from the three-phase systeminto an alternating voltage with a constant frequency of 25 kHz.

• MOVITRANS® TAS transformer module [2]The TAS transformer module converts the output voltage from the TPS stationaryconverter into a constant sinusoidal alternating current. The output current is isolatedfrom the AC power supply via a matching transformer. An adjustment of the trans-mission line takes place via compensation components.

137714827

[A] Stationary components[B] Mobile components

[1] MOVITRANS® TPS stationary converter[2] MOVITRANS® TAS transformer module[3] MOVITRANS® TCS, TIS, TLS, TVS installation equipment (transmission line)[4] MOVITRANS® THM pick-up[5] MOVITRANS® TPM mobile converter[6] Mobile consumer

Einspeisestelle

TPS

Gyrator

+Trafo

TAS

TPS TAS THM

[A] [B]

[1] [2] [3] [4] [5] [6]

I = const.

L1L2

L3TPM UDC

DC-24-V

DC-500-V

UAC

TIn


1Theory of operationIntroduction

• MOVITRANS® TLS, TIS, TCS, TVS installation equipment [3] (transmission line)The TLS supply cable is used in 60-A systems between transformer module andtransmission line as well as for the interconnection of several transmission lines.

The line TLS conductor conducts the impressed alternating current from the TAStransformer module. It forms a conductor loop with supply and return cable.

The line cable is supported by the TIS profile system when U-shaped pick-ups areused for energy transfer. When flat THM pick-ups are used, the line cables are castin the floor, installed on the floor with TIS installation plates, or installed in the floorwith the TIS rubber profile (in preparation).

The TCS compensation box is used for compensating the inductive reactance of theTLS line cable. Each TCS compensation box compensates a particular track section.

The TVS connection distributor can be used to connect individual track parts and toconnect the TLS supply cable to the track.

1.4.4 Mobile components [B]• MOVITRANS® THM pick-up [4]

The THM pick-ups transfer the energy contactlessly from the line cable to the TPMmobile converter. Different mechanical designs and electrical performance ratingsare available for the different transmission concepts. The TPM mobile convertersmust match the THM pick-ups.

The power that can be transmitted per THM pick-up depends on the size of the TLSline cable current and the electromagnetic connection between the TLS line cableand the THM pick-up.

• MOVITRANS® TPM mobile converter [5]The TPM mobile converter converts the current impressed from the pick-up into DCvoltage. The system is optimized for use of inverters from SEW-EURODRIVE suchas MOVIDRIVE®, MOVITRAC® 07 and MOVIMOT®.

7

8

2 OVITRANS® TPS stationary converterechnical Description of MOVITRANS® Components

2 Technical Description of MOVITRANS® Components2.1 MOVITRANS® TPS stationary converter2.1.1 Sizes

The figure shows the TPS10A stationary converter in the available sizes 2 (4 kW) and 4(16 kW):

2.1.2 DescriptionThe TPS10A stationary converter is available in two sizes with 4kW or 16kW ratedoutput power.

The TPS10A stationary converter has following technical characteristics:

• The compact unit design requires only a minimum of control cabinet space andmakes optimum use of the existing control cabinet size.

• Wide input voltage range: 3 × AC 380 – 500 V ± 10%

• Line filters are required for compliance with limit class A according to EN 55011.

• The stationary converter has one analog input, 5 isolated binary inputs and 2 binaryoutputs for control.

• Operating statuses, setpoint modes and error messages are indicated by threeLEDs.

• The units have removable electronics terminals (removable connection unit).

• Fault diagnostics is possible using the MOVITOOLS® MotionStudio software.

• The units are equipped with a measuring device to determine the compensationvalue.

462047499

MT

Pi

fkVA

Hz

n

Pi

fkVA

Hz

n


2MOVITRANS® TAS transformer moduleTechnical Description of MOVITRANS® Components

2.2 MOVITRANS® TAS transformer module2.2.1 Sizes

The following figure shows the TPS10A transformer module in the available sizes2 (4 kW) and 4 (16 kW):

2.2.2 DescriptionThe TAS10A transformer module is available in two sizes with 4kW or 16kW rated out-put power. The units form an ideal combination with the matching TPS10A stationaryconverter.

The TAS10A transformer module comprises the following components:

• Voltage / current converter (gyrator)

• Matching transformer

• Compensation components

The TAS10A tranformer module has following technical characteristics:

• A conductor loop can be connected to each of the TAS10A transformer modules with4kW and 16kW rated output power.

• Both units are available in a design with 60 A or 85 A line cable current.

462024843


Pi

fkVA

Hz

n

Pi

fkVA

Hz

n

9

10

2 OVITRANS® TLS line cableechnical Description of MOVITRANS® Components

2.3 MOVITRANS® TLS line cable2.3.1 Version

The following figure shows the TLS10E line cable:

2.3.2 DescriptionThe TLS10E lines cables are laid along the transmission line.

The TLS10E line cable has the following technical characteristics:

• All line cable types are designed as fine, medium-frequency litz wires and are usedfor energy transfer.

The core of the cable is made up of several thin wires isolated against one anotherby a coating. They are protected against contact with a double cable jacket.

• The supply and return cables must be routed in parallel as a current loop.

• The line cables are available with cross sections of 8mm2, 16 mm2, 25 mm2 and41 mm2.

Large cross sections are suitable for long distances. The transmission efficiency islower for cables with small cross sections.

• Fore a line cable current of 60 A, SEW-EURODRIVE recommends cross sections of16 mm2 and 25 mm2 and for a line cable current of 85 A crosse sections of 25 mm2

and 41 mm2.

441285131

MT

Pi

fkVA

Hz

n

Pi

fkVA

Hz

n


2MOVITRANS® TLS supply cableTechnical Description of MOVITRANS® Components

2.4 MOVITRANS® TLS supply cable2.4.1 Version

The following figure shows the TLS10E supply cable:

2.4.2 DescriptionThe TLS10E power supply cable connects the supply cabinet to the energy transmissionline.

The TLS10E supply cable has the following technical characteristics:

• This cable type is designed as six-core fine litz wires.

• Two installation types are available: Fixed installation, for example in the cable duct,or flexible installation in a cable carrier.

• The cable cross section is 2 × 3 × 6 mm2.

• At present, one design for 60 A line cable current is available.

138634123


Pi

fkVA

Hz

n

Pi

fkVA

Hz

n

11

12

2 OVITRANS® TIS installation plateechnical Description of MOVITRANS® Components

2.5 MOVITRANS® TIS installation plate2.5.1 Version

The following figure shows the TIS10A installation plate with inserted TLS line cable:

2.5.2 DescriptionThe TIS10A installation plates are mounted to the floor along the transmission line. TheTLS line cable is inserted into the TIS installation plate.

The TIS10A installation plate has the following technical characteristics:

• The installation plate is suitable for TLS line cables with a cross section of 25 mm2

and for line cable currents of 60 A and 85 A.

• The installation plate is suitable for the use with the flat THM10E pick-ups.

• Straight tracks can be implemented.

• The installation plates are very easy to mount.

• The installation plates can be crossed by forklifts.

441307915

MT

Pi

fkVA

Hz

n

Pi

fkVA

Hz

n


2MOVITRANS® TIS profile section systemTechnical Description of MOVITRANS® Components

2.6 MOVITRANS® TIS profile section system2.6.1 Version

The following figure shows the TIS10A profile section system:

2.6.2 DescriptionThe TIS10A profile section system is a fixture for the TLS10E line cable and is mountedalong the transmission line.

The TIS10A profile section system has the following technical characteristics:

• The profile section system is suitable for MOVITRANS® systems with 60 A line cablecurrent for use with U-shaped pick-ups.

• 2 x 8 mm2 line cables have to be installed for both, supply and return lines.

• Straight tracks and curves can be implemented.

• Holding fixtures for OTS profiles by AFT and Dürr are available.

• Universal holding fixtures for the installation on machines are available.

• Cable bushings are available at track ends.

142784267


Pi

fkVA

Hz

n

Pi

fkVA

Hz

n

13

14

2 OVITRANS® TCS compensation boxechnical Description of MOVITRANS® Components

2.7 MOVITRANS® TCS compensation box2.7.1 Version

The following figure shows the connected TCS10A compensation box:

2.7.2 DescriptionThe TCS10A and TCS10B stationary connection components (compensation boxes)are used to compensate the track inductance.

The TCS10A and TCS10B compensation boxes have the following technical character-istics:

• The housing has compact dimensions.

• Optimally dimensioned compensation capacitors are integrated.

• There are versions available for 60 A and/or 85 A line cable current.

• Different assembly options are available.

• The compensation boxes are available in protection classes I and II.

138651531

MT

Pi

fkVA

Hz

n

Pi

fkVA

Hz

n


2MOVITRANS® TVS connection distributorTechnical Description of MOVITRANS® Components

2.8 MOVITRANS® TVS connection distributor2.8.1 Version

The following figure shows the connected TVS10A connection distributor for a 60 A linecable current:

The following figure shows the connected TVS10A connection distributor for a 85 A linecable current:

2.8.2 DescriptionThe TVS10A and TVS10B stationary connection components (connection distributors)are used to connect the medium-frequency cables to the track.

The TVS10A and TVS10B connection distributors have the following technical charac-teristics:

• The housing has compact dimensions.

• Delivered with terminal board and jumpers.

• There are versions available for 60 A and 85 A line cable current.

• Different assembly options are available.

• The connection distributors are available in protection classes I and II.

441166091

441168267


Pi

fkVA

Hz

n

Pi

fkVA

Hz

n

15

16

2 OVITRANS® THM pick-upsechnical Description of MOVITRANS® Components

2.9 MOVITRANS® THM pick-ups2.9.1 THM10C pick-upVersion The following figure shows the U-shaped THM10C pick-up:

Description The U-shaped THM10C pick-up has following technical characteristics:

• The connection cable (max. length 6m) with HAN® Q4/2M connector is installed.

• The pick-up can be mounted using the 4 M6 threaded holes.

• With a line cable current of 60 A, the

– rated output power is 800 W

– the peak output power is 900 W.

138656779

MT

Pi

fkVA

Hz

n

Pi

fkVA

Hz

n


2MOVITRANS® THM pick-upsTechnical Description of MOVITRANS® Components

2.9.2 THM10E pick-upVersion The following figure shows the flat THM10E pick-up:

Description The THM10E flat pick-ups have the following technical characteristics:

• The connection cable (max. length 6m) with HAN® Q4/2M connector is installed.

• The pick-up can be mounted using the 4 M8 threaded holes.

• The rated output power is 1500 W (for a 85 A line cable current) or 950 W (for a 60 Aline cable current).

138658315


Pi

fkVA

Hz

n

Pi

fkVA

Hz

n

17

18

2 OVITRANS® TPM mobile converterechnical Description of MOVITRANS® Components

2.10 MOVITRANS® TPM mobile converter2.10.1 Version

The following figure shows the TPM12B mobile converter with four connections:

2.10.2 DescriptionThe TPM12B mobile converter converts the energy taken from the pick-ups intoDC 500 V and DC 24 V.

Following connection variants are possible at the input:

• 1 or 2 THM flat pick-ups

• 2 oder 4 THM U-shaped pick-ups

The output power differs depending on the variant.

The TPM10B mobile converter has the following technical characteristics:

• A direct voltage output of 500 V is used to supply power to the load.

• Class limit A to EN 55011 is met as standard.

• Two isolated binary inputs and one binary output are available to control the mobileconverter.

• LEDs are used to indicate operating states and fault conditions.

• A DC 24 V auxiliary voltage output with a maximum current carrying capacity of 2 Ais used to supply the control and communication components.

138718859

INFORMATIONThe DC 24 V auxiliary voltage is not suitable to supply a DC 24 V motor brake. If amotor brake is to be controlled, you require an additional DC 500 V/DC 24 V converteror a MOVIMOT® to connect an electric motor connection.

MT

Pi

fkVA

Hz

n

Pi

fkVA

Hz

n


3Stationary componentsOverview and Functions of MOVITRANS® Components

3 Overview and Functions of MOVITRANS® Components3.1 Stationary components

The following table gives an overview of the MOVITRANS® stationary components:

Unit type Type designation Power Functional description

Stationary converter

TPS10A040-NF0-503-1 4 kW

• Built-in unit• IP20• 4 kW/cdf 100%• Integrated fan• connection AC 380 - 500 V +/-10%

TPS10A160-NF0-503-1 16 kW

• Built-in unit• IP20• 16 kW/cdf 100%• Integrated fan• connection AC 380 - 500 V +/-10%

Transformer module

TAS10A040-N06-4x1-1 4 kW

• Built-in unit• IP20• 4 kW/cdf 100%• Output 60 A / 25 kHz• incl. gyrator, transformer • Without compensation capacitors

TAS10A040-N08-4x1-1 4 kW

• Built-in unit• IP20• 4 kW/cdf 100%• Output 85 A / 25 kHz• incl. gyrator, transformer• Without compensation capacitors

TAS10A160-N06-4x1-1 16 kW


TAS10A160-N08-4x1-1 16 kW


Line filter

NF014-503 4 kW

• Built-in unit• IP20• 14 A• used for TPS10A040

NF035-503 16 kW

• Built-in unit• IP20• 35 A• Used for TPS10A160


Pi

fkVA

Hz

n

19

20

3 tationary componentsverview and Functions of MOVITRANS® Components

Unit type Type designation Line cable current

Functional description

Compensation capacitor,(for TAS10A transformer module)

TCS10A-008-XXX-060 A

or85 A

• Complete set of compensation capacitors for TAS10A to adjust all possible track lengths to the first compensation box.

• The complete set consists of:– 1 pc. TCS10A -008-020-0– 1 pc. TCS10A -008-040-0– 1 pc. TCS10A -008-080-0– 1 pc. TCS10A -008-160-0– 1 pc. TCS10A -008-320-0

TCS10A -008-020-060 A

or85 A

• Compensation capacitor,• Capacity 2 µF• with setscrew for installation in TAS10A• Capacitive resistance at 25 kHz = 3.2 Ω

TCS10A -008-040-060 A

or85 A


TCS10A -008-080-060 A

or85 A


TCS10A -008-160-060 A

or85 A


TCS10A -008-320-060 A

or85 A


SO

Pi

fkVA

Hz

n


3Mobile componentsOverview and Functions of MOVITRANS® Components

3.2 Mobile componentsThe following table shows the mobile MOVITRANS® components for the use with flatpick-ups:

The following table shows the mobile MOVITRANS® components for the use withU-shaped pick-ups:


Flat pick-up THM10E015-009-000-1

1.5 kW(at 85 A)0.9 kW

(at 60 A)

• Flat pick-up with UL approval• IP65• 1.5 kW/cdf 100%• T (ambient) 40 °C• up to 6 m cable (Ölflex-Classic) and Han®Q4/2 plug

connector (please specify when placing your order)

Mobile converter TPM12B030-ENE-5A2-2 up to 3 kW

• Connection of 1 or 2 flat THM10E pick-ups• IP65• 3 kW/cdf 100%• Output DC 500 V + DC 24 V up to 2 A

Mobile converter connection cable – –

• Hybrid cable with T1 connector for connection to TPM12B mobile converter output.

• Cable open at one end with conductor end sleeves (specify the cable length in m in your order)


U-shaped pick-up THM10C008-022-076-1

800 W (at 60 A)

(900 W peak

power)

• U-shaped pick-up with UL approval• IP65• 800 W/cdf 100%, 900 W peak power• Line cable current 60 A• T (ambient) 50 °C• up to 6 m cable (Ölflex-Classic) and Han®Q4/2 plug

connector (please specify when placing your order)

Mobile converter TPM12B036-ENC-5A2-2 up to 3.6 kW

• Connection of 2 or 4 U-shaped THM10C pick-ups,• IP65• 3.6 kW/cdf 100%• Output DC 500 V + DC 24 V up to 2 A

Mobile converter connection cable – –

• Hybrid cable with T1 connector for connection to TPM12B output

• Cable open at one end with conductor end sleeves (specify the cable length in m in your order)


Pi

fkVA

Hz

n

21

22

3 stallation equipmentverview and Functions of MOVITRANS® Components

3.3 Installation equipment The following table gives an overview of the MOVITRANS® installation equipment forfloor routing:



Line cable

TLS10E-016-01-1 60 A

• Conductor loop for flat pick-ups• MF litz wires• Floor routing• Cable cross section 16 mm2

• Outer diameter 10.9 mm,• reduced transmission power

TLS10E-025-01-1 85 A

• Conductor loop for flat pick-ups• MF litz wires• Floor routing• Cable cross section 25 mm2

• Outer diameter 12.5 mm,

TLS10E-041-01-1 85 A

• Conductor loop for flat pick-ups• MF litz wires• Floor routing for longer track distances• Cable cross section 41 mm2

• Outer diameter 15 mm,

Power supply cable TLS10E-006-06-1 60 A

• Power supply cable from supply cabinet to energy transmission line

• fine litz wires• Routing in cable duct• Cable cross section 2 × 3 × 6 mm2


Connection distributor

TVS10A-E08-000-1 60 A

• Stationary connection components (connection distributor)• to connect MF cables• flange plate 2 x M32 / 4 x M25• Protection class I

TVS10A-E08-000-160 Aand85 A


TVS10A-E08-000-260 Aand80 A


TVS10B-E06-000-1 60 A

• Stationary connection components (connection distributor)• to connect MF cables• flange plate 2 x M32 / 4 x M25• Protection class II (no PE connection required)

TVS10B-E08-000-160 Aand80 A


TVS10B-E08-000-260 Aand80 A


InO

Pi

fkVA

Hz

n


3Installation equipmentOverview and Functions of MOVITRANS® Components

The following table gives an overview of the MOVITRANS® installation equipment forthe installation in the profile section system:

Compensation box

TCS10A-E06-090-1 60 A

• Stationary connection components• to connect MF cables• Capacative reactance at 25 kHz = 7.1 Ω• flange plate 4 x M25 / 4 x M25• Protection class I

TCS10A -E08-120-160 A

or85 A


TCS10A -E08-120-360 A

or85 A


TCS10B-E06-090-1 60 A

• Stationary connection components• to connect MF cables• Capacative reactance at 25 kHz = 7.1 Ω• flange plate 4 x M25 / 4 x M25• Protection class II (no PE connection required)

TCS10B-E08-120-160 A

or85 A


TCS10B-E08-120-360 A

or85 A


Installation plate TIS10A025-V00-0 –• Installation plate with cover and 6 rubber studs for flat pick-

ups• Cable cross section 25 mm2





Line cable TLS10E-008-01-1

30 A (60 A for double installa-

tion)

• Conductor loop for U-shaped pick-ups• MF litz wires• Installation in TIS10A-008 profile sections• Cable cross section 8 mm2


Power supply cable TLS10E-006-06-1 60 A

• Power supply cable from supply cabinet to energy transmission line

• fine litz wires• Routing in cable duct• Cable cross section 2 × 3 × 6 mm2


Compensation box

TCS10A-E06-090-1 60 A


TCS10B-E06-090-1 60 A



Pi

fkVA

Hz

n

23

24

3 stallation equipmentverview and Functions of MOVITRANS® Components

Connection distributor

TVS10A-E08-000-1 60 A

• Stationary connection components (wiring box)• to connect MF cables• flange plate 2 x M32 / 4 x M25• Protection class I

TVS10B-E06-000-1 60 A

• Stationary connection components (wiring box)• to connect MF cables• flange plate 2 x M32 / 4 x M25• Protection class II (no PE connection required)

Unit type Type designation Packag-ing unit


Holding fixture

TIS10A008-H00-0 1 item

• Holding fixture with 2 rotary supports• matching AFT profile 180• for U-shaped pick-ups• MF litz wire, laid in plastic profile• Cable cross section 8 mm2

TIS10A008-H02-0 1 item

• Holding fixture with 2 rotary supports• matching Dürr profile 180 and universal holding fixtures• for U-shaped pick-ups• MF litz wire, laid in plastic profile• Cable cross section 8 mm2

Profile section

TIS10A008-P33-0 1 item, 3 m

• Profile section, rigid• Installation dimension 33 mm• 3 m long• for U-shaped pick-ups• MF litz wire, laid in plastic profile• Cable cross section 8 mm2

TIS10A008-P74-0 1 item, 3 m

• Profile section, rigid• Installation dimension 74 mm• 3 m long• for U-shaped pick-ups• MF litz wire, laid in plastic profile• Cable cross section 8 mm2

TIS10A008-F33-0 1 item,2.2 m

• Profile section, flexible• Installation dimension 33 mm• 2.2 m long• for U-shaped pick-ups• MF litz wire, laid in plastic profile• Cable cross section 8 mm2

TIS10A008-F74-0 1 pc, 2.2 m

• Profile section, flexible• Installation dimension 74 mm• 2.2 m long• for U-shaped pick-ups• MF litz wire, laid in plastic profile• Cable cross section 8 mm2

Cable opening

TIS10A008-A00-0 1 pc.

• cable bushing grommet• for U-shaped pick-ups• MF litz wire, laid in plastic profile• Cable cross section 8 mm2

TIS10A008-A74-0 1 pc.

• Cable entry frame • for U-shaped pick-ups• MF litz wire, laid in plastic profile• Cable cross section 8 mm2

Holding plate

TIS10A-008-X00-0 1 pc.

• retaining plate with two M6x25 socket head screws• matching AFT profile 180• for mounting the TVS connection distributor and the TCS

compensation box

TIS10A008-X02-0 1 pc.

• retaining plate with two M6x25 socket head screws• matching Dürr profile 180• for mounting the TVS connection distributor and the TCS

compensation box

Universal retaining plate TIS10A008-XH2-0 1 pc. Universal retaining plate for mounting the TIS10A008-H02-0

holding fixture



InO

Pi

fkVA

Hz

n


4CE markingRegulations, Certifications and Standards

4 Regulations, Certifications and Standards4.1 CE marking

MOVITRANS® components comply with the regulations of the low voltage directive2006/95/EC.

4.2 UL approval

4.3 Electromagnetic compatibility (EMC)4.3.1 Introduction

The MOVITRANS® system allows for contactless energy transfer to mobile consumers.

With respect to electromagnetic compatibility, SEW-EURODRIVE applies the EMCproduct standard EN 61800-3 for the MOVITRANS® system. This standard specifies therequirements for interference immunity and interference emission for electrical drivetechnology units. A large number of tests ensures that the MOVITRANS® componentsmeet these requirements.

During installation, make sure that the regulations and recommendations for EMC-compliant installation described in this documentation are observed to ensure smoothoperation of the system.

This section details the level of electromagnetic compatibility (EMC) for MOVITRANS®

systems in control cabinet installation.

4.3.2 TPS stationary converter and TAS transformer moduleThe MOVITRANS® TPS stationary converter and TAS transformer module are powerelectronics components that operate with switching frequencies that are also commonin the switched-mode power supply and inverter technology.

The magnetic fields that occur on the TAS transformer module are sufficiently shieldedby the control cabinet.

Limit value class A in accordance with EN 55011 is achieved by using anupstream line filter.

The CE mark on the nameplate indicates conformity with the LowVoltage Directive 2006/95/EC and the EMC Directive 89/336/EEC.

We can provide a declaration of conformity on request.

UL and cUL approval has been granted for all MOVITRANS®

components. cUL is equivalent to CSA approval. UL®C UL®

25

26

4 lectromagnetic fields (EMF)egulations, Certifications and Standards

4.4 Electromagnetic fields (EMF)4.4.1 Introduction

SEW-EURODRIVE had measurements taken for systems with MOVITRANS® compo-nents for contactless energy transmission. The goal of the measurements was to checkthat the systems comply with the permitted values.

Topologies with THM10E flat pick-up and THM10C U-shaped pick-up had beenchecked.

4.4.2 Flat THM10E pick-upStandards and guidelines

The standards and directives in force are:

• BGV B11 06/2001 (VBG 25)

• DIN VDE 0848 part 1 08/2000

• ICNIRP 1998

• IEEE Std. C95.1, Edition 1999

Field of application Systems comprising a TPS stationary converter, a TAS transformer module, transmis-sion lines with TLS line cables, a THM pick-up, a TPM mobile converter and mobileconsumers were checked.

The following transmission line designs were tested:

• Line cable

• Distance between line cables = 140 mm

The line cable was operated with 85 A in order to measure and evaluate the permittedlimit values (magnetic medium-frequency fields at 25 kHz sinusoidal current).

International an professional association limit values

The measured values were compared eith the values permitted according to BGV B11(06/01). The comparison showed, that the measured values (200 mm distance to theline cable) were significantly below the permitted values.

The permitted values in the ICNIRP standard are complied with a distance of 0.3 m fromthe line cables.

For the US-American market, the measured values were significantly below the permit-ted distance values of the "IEEE standard C95.1 Edition 1999" in the systems tested.

Exposure situation The system sections examined can be assigned exposure area 1. Permanent exposurewas assumed during the tests.

INFORMATIONA risk to health is ruled out.

ER


4Electromagnetic fields (EMF)Regulations, Certifications and Standards

Protective measures

Comply with the following instructions and take any measures necessary:

4.4.3 U-shaped THM10C pick-upStandards and guidelines

The standards and directives in force are:

• BGV B11 exposure area 1 and 2

Field of application Systems comprising a TPS stationary converter, a TAS transformer module, transmis-sion lines with TLS line cables, a THM pick-up, a TPM mobile converter and mobileconsumers were checked.

The following transmission line designs were tested:

• TLS10E008-01-1 line cable

• Line cable routing in TIS profile section system

• Profile section system mounted on aluminum carrier plate

The line cable was operated with 60 A in order to measure and evaluate the permittedlimit values (magnetic medium-frequency fields at 25 kHz sinusoidal current).

Professional association limit values

The measured values were compared eith the values permitted according to BGV B11.The comparison showed, that the measured values (100 mm distance to the line cable)were below the permitted values.

Exposure situation The system sections examined can be assigned exposure area 1. Permanent exposurewas assumed during the tests.

INFORMATIONSpecial protective measures are not required for persons without medical devices.

WARNINGElectromagnetic fields might pose a health risk to persons with medical devices, suchas pacemakers.

Severe or fatal injuries• Persons with medical devices, such as pacemakers, must keep a minimum

distance of 60 cm (23.6 in) to the line cable.• This information must be documented in the operating instructions and suitable

signs must be attached to the system as described in BGV A8 (VBG 125).

INFORMATIONA risk to health is ruled out.

27

28

4 lectromagnetic fields (EMF)egulations, Certifications and Standards

Protective measures

Comply with the following instructions and take any measures necessary:

INFORMATIONSpecial protective measures are not required for persons without medical devices.

WARNINGElectromagnetic fields might pose a health risk to persons with medical devices, suchas pacemakers.

Severe or fatal injuries• Persons with medical devices, such as pacemakers, must keep a minimum

distance of 32 cm (12.6 in) to the line cable.• This information must be documented in the operating instructions and suitable

signs must be attached to the system as described in BGV A8 (VBG 125).

ER


5Conveyor trolleysApplication Examples

5 Application Examples5.1 Conveyor trolleys5.1.1 Use

The following figure shows the pallet transportation and distribution with a conveyortrolley in transportation logistics and the MOVITRANS® energy supply for travel andchain drives:

5.1.2 Requirements• Moving pallets transversely over longer distances

• Replacing cable carriers with contactless energy transfer

• Reducing downtimes by eliminating repairs (cable breaks)

• Extending travel distance without having to use complicated holders for drag-chains

5.1.3 Benefits of MOVITRANS®

• Permanently high level of availability

• Long travel distances

• Simple installation

• High mechanical tolerances

• Easy to extend (e.g. extending / changing the travel distance)

• Simple to integrate in existing systems

• Wear-free system (no wear from bending or torsion)

• High travel speeds

• Compact dimensions in transfer area

336240523

29

30

5 ush-skid conveyor systempplication Examples

5.2 Push-skid conveyor system5.2.1 Use

The following figure shows a push-skid conveyor system with elevating table in theautomotive industry and the MOVITRANS® energy supply for the elevating table:

5.2.2 Requirements• Wear-free power supply system for the elevating table mounted on the push-skid

conveyor

• High mechanical tolerances (air gap) between the line cable and pick-up ensure thatthe individual conveyor platforms can be integrated smoothly into the conveyorsystem


• Wear-free system (slide line does not have to be opened for maintenance work)

• Compact unit (all MOVITRANS® components can be installed in the intermediatespace of the push-skid conveyor platform. This means that the entire surface of thepush-skid conveyor is accessible)

• The compact dimensions of the pick-ups make it possible to convert existing systemswith conductor rails

336255499

PA


5Floor conveyor system (FCS) / automated guide vehicle system (AGV)Application Examples

5.3 Floor conveyor system (FCS) / automated guide vehicle system (AGV)5.3.1 Use

The following figure shows a floor conveyor system (FCS)/automated guide vehiclesystem (AGV) in final assembly and the application and installation of the MOVITRANS®

components in FCS/AGV systems:

5.3.2 Requirements• Provide energy without a battery (short cycle times) or contact wires/trailing cables

(no channels under the vehicle)

• Flat accessible areas (due to transverse traffic) without grooves for track guidance

• Flexible track layout (with points if required)


• Wear-free and maintenance-free energy transfer

• Line cables are laid in the floor (up to 15 mm effective air gap) allows other transportsystems to cross (e.g. forklifts)

• The individual power supply of the vehicles allows for a separation of rigging stationand assembly line

• The electromagnetic field emitted from the line cables can be used to guide thevehicle along the track

• Easy to change the track layout by relaying the line cable

336249867

31

32

5 verhead trolley systempplication Examples

5.4 Overhead trolley system5.4.1 Use

The following figure shows the material feed with an overhead trolley system (OTS) forlight loads in the automotive industry and the contactless MOVITRANS® energy transferto mobile OTS vehicles:

5.4.2 Requirements• Reduce downtimes caused by maintenance or malfunctions such as a short circuit

due to contamination or moisture

• Flexible system due to simple modification or extension

• Lower operating noise of the OTS

336245003

OA


5Overhead trolley systemApplication Examples


• Trolleys are integrated smoothly into the conveyor system

• High mechanical tolerances due to large airgap

• High availability (particularly important when used in assembly lines)

• Flexible system due to modular system

• Wear-free system

• No rail sections required. Line cables are laid continuously

• System is completely insulated

33

34

6 ata light barriersxternal Communication

6 External Communication6.1 Data light barriers6.1.1 Introduction

Photoelectric data beams are used for communication on straight track sections. Theyare available for all common fieldbus systems. A cascading function is available withsome photoelectric data beam types. This function can be used to address severalstations.

6.1.2 CascadingCascading is when several transmission lines are connection in series. The followingfigure gives an example of cascading photoelectric data beams for two trolleys:

6.1.3 SystemsThe following table gives an overview of the suppliers and their systems:

138757131

Manufacturer Lase Leuze Leuze Pepperl+Fuchs

Type DDLS200 DDLS200 DDLS78 LS610

Operational range Up to 300 m (500 m) (984 ft (1640 ft))

Up to 500 m (1640 ft) Up to 200 m (656 ft) Up to 240 m (787 ft)

Light source IR LED IR LED Red light / IR LED IR LED

Max. transmission rate Up to 2 MBit/s Up to 2 MBit/s Up to 38.4. kBit/s Up to 2 MBit/s

Fieldbus systems PROFIBUS, Interbus (Cu), Interbus (Lwl)

PROFIBUS,Ethernet,Interbus (Cu), Interbus (Lwl), DeviceNet, CANopen

PROFIBUS PROFIBUS, Interbus (Cu)

Voltage supply DC 18 – 30 V DC 18 – 30 V DC 12 – 30 V DC 18 – 30 V

Operating temperature –5 °C – +50 °C (+23 °F – +122 °F)

–5 – +50 °C(+23 °F – +122 °F)

–20 – +60 °C(–4 °F – +140 °F)

–10 – +50 °C(+14 °F – +122 °F)

With heater –30 °C – +50 °C(–22 °F – +122 °F)

–30 – +50 °C(–22 °F – +122 °F)

–35 – +60 °C(–22 °F – +140 °F)

–

Other – Cascading possible Cascading possible –

DE

Pi

fkVA

Hz

n

Pi

fkVA

Hz

n


6Data light barriersExternal Communication

Manufacturer Sick Sick Sick

Type ISD300 ISD280 ISD400

Operational range Up to 300 m (984 ft) Up to 150 m (492 ft) Up to 180 m (591 ft)

Light source IR IR LED IR LED

Max. transmission rate Up to 2 MBit/s Up to 1.5 MBit/s Up to 3 MBit/s

Fieldbus systems PROFIBUS,Ethernet,Interbus (Cu), Interbus (Lwl), DeviceNet, CANopen

PROFIBUS PROFIBUS,Ethernet

Voltage supply DC 18 – 30 V DC 20 – 28 V DC 18 – 30 V

Operating temperature +5 °C – +50 °C(+41 °F – +122 °F)

0 °C – +40 °C(+32 °F – +104 °F)

–25 °C – +55 °C(–13 °F – +131 °F)

With heater –30 °C – +50 °C(–22 °F – +122 °F)

–38 °C – +40 °C(–36 °F – +104 °F)

–40 °C – +55 °C(–40 °F – +131 °F)

Other Cascading possible – –

INFORMATIONThe information given in the manufacturers' data sheets must be used for projectplanning. The list of systems is not exhaustive. It is simply an extract of the systemscurrently available on the market.


Pi

fkVA

Hz

n

Pi

fkVA

Hz

n

35

36

6 adio systemsxternal Communication

6.2 Radio systems6.2.1 Introduction

Radio systems are another alternative for communication in systems that use contact-less energy transfer.

A wide variety of radio systems is available on the market. The performance ranges frompoint-to-point transfer of individual I/Os to PROFIBUS radio connections through toWLAN networks (Ethernet).

6.2.2 SystemsThe following table gives an overview of the suppliers and their systems:

Manufacturer Götting Phoenix Phoenix

Type G 76300-A ILB BT ADIO MUX-OMNI

PSI-WL-RS232-RS485/BT

Operational range Not specified Up to 100 m (328 ft) Up to 150 m (492 ft)

Frequency 400 MHz 2.4 GHz 2.4 GHz

Max. transmission rate Up to 9.6 kBit/s Not specified Up to 187.5 kBit/s

Fieldbus systems RS485 2 x analog I/Os16 x digital I/Os

RS485

Voltage supply DC 9 – 36 V DC 19.2 – 30 V DC 10 – 30 V

Operating temperature 0 °C – +50 °C(+32 °F – +122 °F)

–25 °C – +60 °C(–13°F – +140 °F)

–20 °C – +60 °C(–4 °F – +140 °F)

Number of participants Up to 127 Bidirectional 2 Up to 7

Manufacturer Phoenix ELPRO Technologies Westermo

Type FLM BT ... 805U-D RM 240

Operational range Up to 50 m (160 ft) Up to 5 km (16400 ft) Up to 1 km (3281 ft)

Frequency 2.4 GHz 868 MHz 2.4 GHz

Max. transmission rate Not specified Up to 76.8 kBit/s Up to 115 kBit/s (100 MBit/s)

Fieldbus systems 8 x digital I/Os RS485 RS485, Ethernet

Voltage supply DC 19.2 – 30 V DC 10 – 30 V DC 9 – 30 V

Operating temperature Not specified –30 °C – +60 °C(–22 °F – +140 °F)

–35 °C – +65 °C(–31 °F – +149 °F)

Number of participants Up to 3 Up to 255 Not specified

Manufacturer SATEL Schildknecht Schildknecht

Type 3AS DE3... DE1...

Operational range Not specified Up to 100 m (328 ft) Up to 100 m (328 ft)

Frequency Various Various Various

Max. transmission rate Up to 38.4 kBit/s Up to 1 MBit/s Up to 1 MBit/s

Fieldbus systems RS485 (PROFIBUS) PROFIBUS, PROFIsafe RS485

Voltage supply DC 9 – 30 V DC 9 – 33 V DC 9 – 33 V

Operating temperature –25 °C – +55 °C(–13 °F – +131 °F)

–10 °C – +60 °C(14 °F – +140 °F)

–10 °C – +60 °C(14 °F – +140 °F)

Number of participants Not specified Not specified Not specified


RE

Pi

fkVA

Hz

n

Pi

fkVA

Hz

n


6Radio systemsExternal Communication

WLAN (Ethernet) The following table gives an overview of the suppliers and their systems:

Manufacturer ELPRO Technologies ADSTec Phoenix

Type 245U-E 240U-E RAP1000 FL WLAN ...

Frequency 2.4 / 5 GHz 2.4 GHz 2.4 / 5 GHz 2.4 / 5 GHz

WLAN standard IEEE 802.11a / b / g

IEEE 802.11b IEEE 802.11a / b / g

IEEE 802.11a / b / g

Max. transmission rate 108 MBit/s 11 MBit/s 54 MBit/s 54 Mbit/s

Fieldbus system Ethernet Ethernet Ethernet Ethernet

Voltage supply DC 9 – 30 V DC 9 – 30 V DC 24 V DC 18.5 – 30.5 V

Operating temperature

–40 °C – +60 °C(–40 °F – +140 °F)

–35 °C – +60 °C(–31 °F – +140 °F)

–10 °C – +60 °C(14 °F – +140 °F)

–10 °C – +60 °C(14 °F – +140 °F)



Pi

fkVA

Hz

n

Pi

fkVA

Hz

n

37

38

7 vailable documentationocumentation

7 Documentation 7.1 Available documentation

The following documents are available on contactless energy transfer withMOVITRANS® in addition to this system description:

A folder containing all the publications above is available on request:

7.2 Additional documentationIn addition to the instructions listed above, SEW-EURODRIVE offers extensive docu-mentation covering the entire topic of electrical drive engineering. These are mainly thepublications of the "Drive Engineering - Practical Implementation" series as well as themanuals and catalogs for electronically controlled drives.

A wide selection of our documentation is available in many languages for download onour website (www.sew-eurodrive.de). If required, you can also order printed andbound copies of the documentation from SEW-EURODRIVE.

DocumentationMOVITRANS® TPS10A stationary converter operating instructionsMOVITRANS® TAS10A transformer operating instructionsMOVITRANS® THM10C/THM10E Pick-Ups operating instructionsMOVITRANS® TPM12B Mobile Converter operating instructionsMOVITRANS® Installation Material TCS, TVS, TLS, TIS operating instructionsMOVITRANS® Project Planning manualEngineering software module MotionStudio MOVITRANS® Parameter Tree manualMOVITRANS® Installation of Transmission Lines with Casting Resin for THM10E Pick-Ups manualMOVITRANS® Installation of Transmission Lines with TIS Installation Plate for THM10E Pick-Ups manual

Documentation collectionMOVITRANS® system manual

AD

Pi

fkVA

Hz

n


8Address List

8 Address List

Germany

HeadquartersProductionSales

Bruchsal SEW-EURODRIVE GmbH & Co KGErnst-Blickle-Straße 42 D-76646 BruchsalP.O. BoxPostfach 3023 • D-76642 Bruchsal

Tel. +49 7251 75-0Fax +49 7251 75-1970http://[email protected]

Production / Indus-trial Gears

Bruchsal SEW-EURODRIVE GmbH & Co KGChristian-Pähr-Str.10D-76646 Bruchsal

Tel. +49 7251 75-0Fax +49 7251 75-2970

Service Compe-tence Center

Central SEW-EURODRIVE GmbH & Co KGErnst-Blickle-Straße 1 D-76676 Graben-Neudorf

Tel. +49 7251 75-1710Fax +49 7251 [email protected]

North SEW-EURODRIVE GmbH & Co KGAlte Ricklinger Straße 40-42 D-30823 Garbsen (near Hannover)


East SEW-EURODRIVE GmbH & Co KGDänkritzer Weg 1D-08393 Meerane (near Zwickau)


South SEW-EURODRIVE GmbH & Co KGDomagkstraße 5D-85551 Kirchheim (near München)


West SEW-EURODRIVE GmbH & Co KGSiemensstraße 1D-40764 Langenfeld (near Düsseldorf)


Electronics SEW-EURODRIVE GmbH & Co KGErnst-Blickle-Straße 42 D-76646 Bruchsal


Drive Service Hotline / 24 Hour Service +49 180 5 SEWHELP+49 180 5 7394357

Additional addresses for service in Germany provided on request!

France

ProductionSalesService

Haguenau SEW-USOCOME 48-54 route de Soufflenheim B. P. 20185F-67506 Haguenau Cedex

Tel. +33 3 88 73 67 00 Fax +33 3 88 73 66 00http://[email protected]

Production Forbach SEW-USOCOME Zone industrielle Technopôle Forbach SudB. P. 30269F-57604 Forbach Cedex

Tel. +33 3 87 29 38 00

AssemblySalesService

Bordeaux SEW-USOCOME Parc d'activités de Magellan62 avenue de Magellan - B. P. 182F-33607 Pessac Cedex

Tel. +33 5 57 26 39 00Fax +33 5 57 26 39 09

Lyon SEW-USOCOME Parc d'affaires RooseveltRue Jacques TatiF-69120 Vaulx en Velin

Tel. +33 4 72 15 37 00Fax +33 4 72 15 37 15

Nantes SEW-USOCOME Parc d’activités de la forêt4 rue des FontenellesF-44140 Le Bignon

Tel. +33 2 40 78 42 00Fax +33 2 40 78 42 20

39

40

8 ddress List

Paris SEW-USOCOME Zone industrielle 2 rue Denis Papin F-77390 Verneuil I'Etang

Tel. +33 1 64 42 40 80Fax +33 1 64 42 40 88

Additional addresses for service in France provided on request!

Algeria

Sales Alger REDUCOM Sarl 16, rue des Frères ZaghnouneBellevue16200 El Harrach Alger

Tel. +213 21 8214-91Fax +213 21 [email protected]://www.reducom-dz.com

Argentina


Buenos Aires SEW EURODRIVE ARGENTINA S.A.Centro Industrial Garin, Lote 35Ruta Panamericana Km 37,51619 Garin

Tel. +54 3327 4572-84Fax +54 3327 [email protected]://www.sew-eurodrive.com.ar

Australia


Melbourne SEW-EURODRIVE PTY. LTD.27 Beverage DriveTullamarine, Victoria 3043


Sydney SEW-EURODRIVE PTY. LTD.9, Sleigh Place, Wetherill Park New South Wales, 2164


Austria


Wien SEW-EURODRIVE Ges.m.b.H. Richard-Strauss-Strasse 24A-1230 Wien

Tel. +43 1 617 55 00-0Fax +43 1 617 55 00-30http://[email protected]

Belarus

Sales Minsk SEW-EURODRIVE BYRybalkoStr. 26BY-220033 Minsk

Tel.+375 17 298 47 56 / 298 47 58Fax +375 17 298 47 54http://[email protected]

Belgium


Brussels SEW Caron-VectorResearch park HaasrodeEvenementenlaan 7BE-3001 Leuven


Service Compe-tence Center

Industrial Gears SEW Caron-VectorRue de Parc Industriel, 31BE-6900 Marche-en-Famenne


Antwerp SEW Caron-VectorGlasstraat, 19BE-2170 Merksem

Tel. +32 3 64 19 333Fax +32 3 64 19 336http://[email protected]

Brazil

ProductionSalesService

Sao Paulo SEW-EURODRIVE Brasil Ltda.Avenida Amâncio Gaiolli, 152 - Rodovia Presi-dente Dutra Km 208Guarulhos - 07251-250 - SPSAT - SEW ATENDE - 0800 7700496


France

A


8Address List

Bulgaria

Sales Sofia BEVER-DRIVE GmbHBogdanovetz Str.1BG-1606 Sofia

Tel. +359 2 9151160Fax +359 2 [email protected]

Cameroon

Sales Douala Electro-ServicesRue Drouot AkwaB.P. 2024Douala


Canada


Toronto SEW-EURODRIVE CO. OF CANADA LTD. 210 Walker Drive Bramalea, ON L6T 3W1


Vancouver SEW-EURODRIVE CO. OF CANADA LTD.Tilbury Industrial Park7188 Honeyman Street Delta, BC V4G 1G1


Montreal SEW-EURODRIVE CO. OF CANADA LTD.2555 Rue Leger Lasalle, PQ H8N 2V9


Additional addresses for service in Canada provided on request!

Chile


Santiago de Chile

SEW-EURODRIVE CHILE LTDA.Las Encinas 1295Parque Industrial Valle GrandeLAMPARCH-Santiago de ChileP.O. BoxCasilla 23 Correo Quilicura - Santiago - Chile


China

ProductionAssemblySalesService

Tianjin SEW-EURODRIVE (Tianjin) Co., Ltd.No. 46, 7th Avenue, TEDATianjin 300457

Tel. +86 22 25322612Fax +86 22 [email protected]://www.sew-eurodrive.com.cn


Suzhou SEW-EURODRIVE (Suzhou) Co., Ltd.333, Suhong Middle RoadSuzhou Industrial ParkJiangsu Province, 215021


Guangzhou SEW-EURODRIVE (Guangzhou) Co., Ltd.No. 9, JunDa RoadEast Section of GETDDGuangzhou 510530


Shenyang SEW-EURODRIVE (Shenyang) Co., Ltd.10A-2, 6th RoadShenyang Economic Technological Develop-ment AreaShenyang, 110141


Wuhan SEW-EURODRIVE (Wuhan) Co., Ltd.10A-2, 6th RoadNo. 59, the 4th Quanli Road, WEDA430056 Wuhan


41

42

8 ddress List

Xi'An SEW-EURODRIVE (Xi'An) Co., Ltd.No. 12 Jinye 2nd RoadXi'An High-Technology Industrial Development ZoneXi'An 710065


Additional addresses for service in China provided on request!

Colombia


Bogotá SEW-EURODRIVE COLOMBIA LTDA. Calle 22 No. 132-60Bodega 6, Manzana BSantafé de Bogotá


Croatia

SalesService

Zagreb KOMPEKS d. o. o.Zeleni dol 10HR 10 000 Zagreb


Czech Republic

Sales Prague SEW-EURODRIVE CZ S.R.O.Business Centrum Praha Lužná 591CZ-16000 Praha 6 - Vokovice

Tel. +420 255 709 601Fax +420 220 121 237http://[email protected]

Denmark


Copenhagen SEW-EURODRIVEA/SGeminivej 28-30DK-2670 Greve


Egypt

SalesService

Cairo Copam Egypt for Engineering & Agencies33 EI Hegaz ST, Heliopolis, Cairo

Tel. +20 2 22566-299 + 1 23143088Fax +20 2 22594-757http://www.copam-egypt.com/ [email protected]

Estonia

Sales Tallin ALAS-KUUL ASReti tee 4EE-75301 Peetri küla, Rae vald, Harjumaa

Tel. +372 6593230Fax +372 [email protected]

Finland


Lahti SEW-EURODRIVE OYVesimäentie 4FIN-15860 Hollola 2


ProductionAssembly

Karkkila SEW Industrial Gears OyValurinkatu 6, PL 8FI-03600 Karkkila, 03601 Karkkila

Tel. +358 201 589-300Fax +358 201 [email protected]://www.sew-eurodrive.fi

Gabon

Sales Libreville ESG Electro Services GabunFeu Rouge Lalala1889 LibrevilleGabun


China

A


8Address List

Great Britain


Normanton SEW-EURODRIVE Ltd.Beckbridge Industrial Estate P.O. Box No.1Normanton, West-Yorkshire WF6 1QR


Greece

SalesService

Athens Christ. Boznos & Son S.A.12, K. Mavromichali StreetP.O. Box 80136GR-18545 Piraeus

Tel. +30 2 1042 251-34 Fax +30 2 1042 251-59http://[email protected]

Hong Kong


Hong Kong SEW-EURODRIVE LTD.Unit No. 801-806, 8th FloorHong Leong Industrial ComplexNo. 4, Wang Kwong Road Kowloon, Hong Kong


Hungary

SalesService

Budapest SEW-EURODRIVE Kft.H-1037 BudapestKunigunda u. 18

Tel. +36 1 437 06-58Fax +36 1 437 [email protected]

India

Registered OfficeAssemblySalesService

Vadodara SEW-EURODRIVE India Private LimitedPlot No. 4, GIDCPOR Ramangamdi • Vadodara - 391 243Gujarat

Tel. +91 265 3045200, +91 265 2831086Fax +91 265 3045300, +91 265 2831087http://[email protected]@seweurodriveindia.com


Chennai SEW-EURODRIVE India Private LimitedPlot No. K3/1, Sipcot Industrial Park Phase IIMambakkam VillageSriperumbudur - 602105Kancheepuram Dist, Tamil Nadu


Ireland

SalesService

Dublin Alperton Engineering Ltd. 48 Moyle RoadDublin Industrial EstateGlasnevin, Dublin 11

Tel. +353 1 830-6277Fax +353 1 [email protected]://www.alperton.ie

Israel

Sales Tel-Aviv Liraz Handasa Ltd. Ahofer Str 34B / 22858858 Holon

Tel. +972 3 5599511Fax +972 3 5599512http://[email protected]

Italy


Solaro SEW-EURODRIVE di R. Blickle & Co.s.a.s.Via Bernini,14 I-20020 Solaro (Milano)


43

44

8 ddress List

Ivory Coast

Sales Abidjan SICASociété industrielle & commerciale pour l'Afrique165, Boulevard de Marseille26 BP 1115 Abidjan 26

Tel. +225 21 25 79 44Fax +225 21 25 88 [email protected]

Japan


Iwata SEW-EURODRIVE JAPAN CO., LTD 250-1, Shimoman-no,IwataShizuoka 438-0818


Kazakhstan

Sales Almaty ТОО "СЕВ-ЕВРОДРАЙВ"пр.Райымбека, 348050061 г. АлматыРеспублика Казахстан

Тел. +7 (727) 334 1880Факс +7 (727) 334 1881http://[email protected]

Latvia

Sales Riga SIA Alas-KuulKatlakalna 11CLV-1073 Riga


Lebanon

Sales Beirut Gabriel Acar & Fils sarlB. P. 80484Bourj Hammoud, Beirut

Tel. +961 1 510 532Fax +961 1 494 [email protected]

JordanKuwaitSaudi ArabiaSyria

Beirut Middle East Drives S.A.L. (offshore)Sin El Fil.B. P. 55-378Beirut

Tel. +961 1 494 786Fax +961 1 494 [email protected]://www.medrives.com

Lithuania

Sales Alytus UAB IrsevaStatybininku 106CLT-63431 Alytus

Tel. +370 315 79204Fax +370 315 [email protected]://www.sew-eurodrive.lt

Luxembourg


Brussels SEW Caron-VectorResearch park HaasrodeEvenementenlaan 7BE-3001 Leuven


Malaysia


Johore SEW-EURODRIVE SDN BHD No. 95, Jalan Seroja 39, Taman Johor Jaya81000 Johor Bahru, JohorWest Malaysia


Mexico


Quéretaro SEW-EURODRIVE MEXICO SA DE CVSEM-981118-M93Tequisquiapan No. 102Parque Industrial QuéretaroC.P. 76220Quéretaro, México


A


8Address List

Morocco

Sales Casablanca AfitRoute D’El JadidaKM 14 RP8Province de NouaceurCommune Rurale de BouskouraMA 20300 Casablanca

Tel. +212 522633700Fax +212 [email protected]://www.groupe-premium.com

Netherlands


Rotterdam VECTOR Aandrijftechniek B.V. Industrieweg 175 NL-3044 AS RotterdamPostbus 10085NL-3004 AB Rotterdam


New Zealand


Auckland SEW-EURODRIVE NEW ZEALAND LTD. P.O. Box 58-428 82 Greenmount driveEast Tamaki Auckland


Christchurch SEW-EURODRIVE NEW ZEALAND LTD. 10 Settlers Crescent, FerrymeadChristchurch


Norway


Moss SEW-EURODRIVE A/SSolgaard skog 71N-1599 Moss


Pakistan

Sales Karachi Industrial Power DrivesAl-Fatah Chamber A/3, 1st Floor Central Com-mercial Area,Sultan Ahmed Shah Road, Block 7/8, Karachi

Tel. +92 21 452 9369Fax +92-21-454 [email protected]

Peru


Lima SEW DEL PERU MOTORES REDUCTORES S.A.C.Los Calderos, 120-124Urbanizacion Industrial Vulcano, ATE, Lima


Poland


Lodz SEW-EURODRIVE Polska Sp.z.o.o.ul. Techniczna 5 PL-92-518 Łódź


24 Hour Service Tel. +48 602 739 739(+48 602 SEW SEW)

[email protected]

Portugal


Coimbra SEW-EURODRIVE, LDA.Apartado 15 P-3050-901 Mealhada


45

46

8 ddress List

Romania

SalesService

Bucharest Sialco Trading SRL str. Madrid nr.4 011785 Bucuresti

Tel. +40 21 230-1328Fax +40 21 230-7170 [email protected]

Russia


St. Petersburg ZAO SEW-EURODRIVE P.O. Box 36 195220 St. Petersburg Russia

Tel. +7 812 3332522 +7 812 5357142Fax +7 812 3332523http://[email protected]

Senegal

Sales Dakar SENEMECA Mécanique GénéraleKm 8, Route de Rufisque B.P. 3251, Dakar

Tel. +221 338 494 770Fax +221 338 494 [email protected]://www.senemeca.com

Serbia

Sales Beograd DIPAR d.o.o.Ustanicka 128aPC Košum, IV floorSCG-11000 Beograd

Tel. +381 11 347 3244 / +381 11 288 0393Fax +381 11 347 [email protected]

Singapore


Singapore SEW-EURODRIVE PTE. LTD. No 9, Tuas Drive 2 Jurong Industrial Estate Singapore 638644

Tel. +65 68621701Fax +65 68612827http://[email protected]

Slovakia

Sales Bratislava SEW-Eurodrive SK s.r.o.Rybničná 40SK-831 06 Bratislava

Tel. +421 2 33595 202Fax +421 2 33595 [email protected]://www.sew-eurodrive.sk

Žilina SEW-Eurodrive SK s.r.o.Industry Park - PChZulica M.R.Štefánika 71SK-010 01 Žilina


Banská Bystrica SEW-Eurodrive SK s.r.o.Rudlovská cesta 85SK-974 11 Banská Bystrica


Košice SEW-Eurodrive SK s.r.o.Slovenská ulica 26SK-040 01 Košice


Slovenia

SalesService

Celje Pakman - Pogonska Tehnika d.o.o.UI. XIV. divizije 14SLO - 3000 Celje

Tel. +386 3 490 83-20Fax +386 3 490 [email protected]

South Africa


Johannesburg SEW-EURODRIVE (PROPRIETARY) LIMITEDEurodrive House Cnr. Adcock Ingram and Aerodrome RoadsAeroton Ext. 2Johannesburg 2013P.O.Box 90004Bertsham 2013


A


8Address List

Cape Town SEW-EURODRIVE (PROPRIETARY) LIMITED Rainbow ParkCnr. Racecourse & Omuramba RoadMontague GardensCape TownP.O.Box 36556Chempet 7442 Cape Town

Tel. +27 21 552-9820Fax +27 21 552-9830Telex 576 [email protected]

Durban SEW-EURODRIVE (PROPRIETARY) LIMITED2 Monaco PlacePinetownDurbanP.O. Box 10433, Ashwood 3605


Nelspruit SEW-EURODRIVE (PTY) LTD.7 Christie CrescentVintoniaP.O.Box 1942Nelspruit 1200


South Korea


Ansan-City SEW-EURODRIVE KOREA CO., LTD. B 601-4, Banweol Industrial Estate 1048-4, Shingil-DongAnsan 425-120


Busan SEW-EURODRIVE KOREA Co., Ltd.No. 1720 - 11, Songjeong - dongGangseo-kuBusan 618-270


Spain


Bilbao SEW-EURODRIVE ESPAÑA, S.L. Parque Tecnológico, Edificio, 302E-48170 Zamudio (Vizcaya)


Sweden


Jönköping SEW-EURODRIVE ABGnejsvägen 6-8S-55303 JönköpingBox 3100 S-55003 Jönköping


Switzerland


Basel Alfred lmhof A.G.Jurastrasse 10 CH-4142 Münchenstein bei Basel


Thailand


Chonburi SEW-EURODRIVE (Thailand) Ltd.700/456, Moo.7, DonhuarohMuang Chonburi 20000


Tunisia

Sales Tunis T. M.S. Technic Marketing ServiceZone Industrielle Mghira 2Lot No. 392082 Fouchana


South Africa

47

48

8 ddress List

Turkey


Istanbul SEW-EURODRIVE Hareket Sistemleri San. ve Tic. Ltd. Sti. Bagdat Cad. Koruma Cikmazi No. 3 TR-34846 Maltepe ISTANBUL

Tel. +90 216 4419163 / 4419164Fax +90 216 3055867http://[email protected]

Ukraine

SalesService

Dnepropetrovsk SEW-EURODRIVEStr. Rabochaja 23-B, Office 40949008 Dnepropetrovsk


United Arab Emirates

SalesService

Sharjah Copam Middle East (FZC)Sharjah Airport International Free ZoneP.O. Box 120709Sharjah


USA

ProductionAssemblySalesServiceCorporate Offices

Southeast Region

SEW-EURODRIVE INC. 1295 Old Spartanburg Highway P.O. Box 518Lyman, S.C. 29365

Tel. +1 864 439-7537Fax Sales +1 864 439-7830Fax Manufacturing +1 864 439-9948Fax Assembly +1 864 439-0566Fax Confidential/HR +1 864 949-5557http://[email protected]


Northeast Region

SEW-EURODRIVE INC. Pureland Ind. Complex 2107 High Hill Road, P.O. Box 481Bridgeport, New Jersey 08014


Midwest Region SEW-EURODRIVE INC.2001 West Main Street Troy, Ohio 45373


Southwest Region

SEW-EURODRIVE INC.3950 Platinum Way Dallas, Texas 75237


Western Region SEW-EURODRIVE INC. 30599 San Antonio St.Hayward, CA 94544


Additional addresses for service in the USA provided on request!

Venezuela


Valencia SEW-EURODRIVE Venezuela S.A.Av. Norte Sur No. 3, Galpon 84-319Zona Industrial Municipal NorteValencia, Estado Carabobo

Tel. +58 241 832-9804Fax +58 241 838-6275http://[email protected]@cantv.net

Vietnam

Sales Ho Chi Minh City Nam Trung Co., Ltd91 - 93 Tran Minh Quyen Street,District 10, HCMC


A


SEW-EURODRIVE—Driving the world

SEW-EURODRIVEDriving the world

www.sew-eurodrive.com

SEW-EURODRIVE GmbH & Co KGP.O. Box 3023D-76642 Bruchsal/GermanyPhone +49 7251 75-0Fax +49 7251 [email protected]

Documents

MOVITRANS® / System Descriptions / 2011-02The THM pick-ups transfer the energy contactlessly from the line cable to the TPM mobile converter. Different mechanical designs and electrical