Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Ideal solution for up to 6 floors
MRL liftGreen Lift Fluitronic
Leader with more than 750,000 lifts worldwide using GMV technology
LIF
T S
YS
TEM
S
* S
ee n
ote
on p
age
3.
2
MRL liftGreen Lift Fluitronic
3 GOOD REASONS TO CHOOSE GREEN LIFT FLUITRONIC for up to 6 floors
Safety
OUR FLUITRONIC GREEN LIFT
COMPARISON WITH GEARLESS MRL TRACTION LIFTS
Black outThe automatic system of return to floor with door opening is very reliable (based on the force of gravity) and is already installed.
COMPETITORS MRL GEARLESSTRACTION LIFTS
Black outThe automatic system of return to floor with door opening is an expensive option and often requires an auxiliary energy supply.
Emergency operationIt is equipped with a simple and efficient rescue system, based on the force of gravity.
Emergency operationThe emergency operation system is more complicated and often requires an auxiliary energy supply.
There are no permanent magnetsRisk of motor malfunction due to the de-magnetization of the permanent magnets.
Low seismicvulnerability
There are no hung loads(the engine is in the cabinet casing and there is no counterweight). Safer and less vulnerable in the event of an earthquake.
There are hung loads (engine and counterweight). The hanging loads may cause damage to the lift and to the passengers in the event of an earthquake.
EcologyNo environmental problemsEcological lift thanks to the use of biodegradable eco-fluids.
Environmental problemsDue to the production and the disposal of the permanent magnets (with high costs).
Less energyconsumption
during stand-by
The absence of frequency converters permits reduced energy consumption during stand-by.
The use of the frequency converters requires high energy consumption in stand-by.
Economy Competitive price performance being equal, spare parts are easily available on the market hence less maintenance costs.
Higher maintenance costs
WarrantyUp to 10 years warrantyGMV offers an extension of the warranty up to 10 years as proof of the quality of its products.
Legal warrantyNormally 2 years warranty according to the law.
1. TECHNICAL ADvANTAGES • No noise at top floor • Small shaft size required (also pit and headroom) • Low seismic vulnerability
2. 10 yEARS WARRANTy • Quality guaranteed by strong GMV experience acquired thanks to: √ Over 750,000 lifts handled by GMV technology throughout the world. √ Over 100 million people per day using lifts equipped with GMV technology. √ Production units in three continents.
3. UP TO 30% SAvING ON THE TOTAL PRICE: • For the buyer of the lift. • For the end users, thanks to the all inclusive maintenance costs, without extra charges.
3
LIF
T S
YS
TEM
S
HYDRAULIC OIL? NO, FLUITRONIC
NGV Valve
Eco-Fluid
ECO-FLUID Used instead of common mineral oil.No pollution risks in the event of oil leakage. Biodegradability index > 90% in compliance with standard CEC L33-A-93. in compliance with Directive 2006/118/EC on the environment. It is classified HEES (acceptable from an eco-friendly point of view) as per ISO-UNI 6743-4 regulation.
AvERAGE yEARLy CONSUMPTION OF A RESIDENTIAL LIFT (€)
HIGH PERFORMANCESNGV electronic valve with digital technology allows high ride performance, with gradual and undetected acceleration and deceleration and accurate floor levelling (± 10 mm as per EN 81.70 standard concerning disabled people).
The Green Lift Fluitronic is already designed to comply with the latest safety rules. It complies with the A3 Amendment to the EN 81.2 rules, compulsory for all Final Tests starting from 01/01/2012.
Thanks particularly to the NGV digital electronic valve and to the very efficient, non oil-immersed new power units with «dry motor», the Green Lift Fluitronic guarantees the lowest energy consumption. As you can see from the above example, the consumption of the lift running for the condominium on average does not exceed 300 – 400 €.
Ave
rag
e ye
arly
co
nsu
mp
tio
no
f a r
esid
enti
al li
ft (€
)
MRL tractionlifts
Green LiftFluitronic
RunStand-by
* Option to extend your warranty up to 10 year. For further information, please, call the phone number on the backside.
4
MRL liftGreen Lift Fluitronic
TMC Lift Car - Examples
Example 1Walls: Faced – 001 BeigeStructure and corners: Pre-painted sheetmetal (Polimod) Dark GreyCeiling: Ceiling with irregular holes (neon) Floor: PVC – 501 Light grey Mirror: Half wall
Example 2Walls: Faced – 006 Cherry woodStructure and corners: Pre-painted sheetmetal (Polimod) Dark GreyCeiling: Ceiling with led spot lightsFloor: PVC-501 Light greyMirror: Full wall
Example 3Walls: Faced – 005 WhiteStructure and corners: Scotch britestainless steelCeiling: Ceiling with led spot lights Floor: PVC – 502 Dark greyMirror: Full wall
Example 4Walls: Pre-painted sheet metal (Polimod) – 204 Light grey Structure and corners: Pre-painted sheet metal (Polimod) Dark greyCeiling: Neon with led light pipeFloor: Coconut – 602 Red Mirror: Half wall
Example 6Walls: Plastic laminated – 102 WengeStructure and corners: Pre-painted sheetmetal (Polimod) Dark GreyCeiling: Ceiling with led spot lightsFloor: Coconut – 601 NaturalMirror: Full wall
Example 5Walls: Plastic laminated – 103 Whitened oakStructure and corners: Scotch Britestainless steelCeiling: Ceiling with led spot lights Floor: PVC – 502 Dark greyMirror: Full wall
5
LIF
T S
YS
TEM
S
Example 7Walls: Plastic laminated – 112 Yellow ochreStructure and corners: Pre-painted sheetmetal (Polimod) Dark GreyCeiling: Neon with led light pipeFloor: PVC – 502 Dark greyMirror: Full wall
Example 8Walls: Plastic laminated – 110 Water green Structure and corners: Pre-painted sheetmetal (Polimod) Dark GreyCeiling: Ceiling with led spot lights Floor: Coconut – 601 NaturalWithout mirror
Example 9Walls: Plastic laminated – 113 BlueStructure and corners: Pre-painted sheetmetal (Polimod) Dark GreyCeiling: Ceiling with led spot lights Floor: Coconut – 602 RedMirror: Full wall
Example 10Walls: Plastic laminated108 Dark cherry woodStructure and corners: Scotch Britestainless steelCeiling: Ceiling with irregular holes (neon) Floor: PVC – 502 Dark greyMirror: Full wall
Example 11 Walls : Plastic laminated – 109 Pearl aluminiumStructure and corners: Scotch Brite stainless steelCeiling: Neon with led light pipeFloor: Coconut – 602 RedGlass wall panels
Example 12Walls: Scotch Brite stainless steelStructure and corners: Scotch Britestainless steelCeiling: Ceiling with led spot lights Floor: PVC – 501 Light greyMirror: Full wall
6
MRL liftGreen Lift Fluitronic
Colours and Materials
Faced
Car Panels
001 Beige 004 Light grey 005 White
112 Yellow ochre 110 Water green 113 Blue
109 Pearl aluminium 106 Stone silver frost finish 111 White grey stone
Plastic laminated
Glass
801 Glass
Stainless steel
301 Scotch brite*
Floor coatings
501 Light grey 502 Dark grey 601 Natural coconut 602 Red coconut
PvC COCONUT
302 Checkers 303 Linen
201 Beige 204 Light grey 205 Dark grey
Pre-painted sheet metal(Polimod)
7
LIF
T S
YS
TEM
S
006 Cherry wood 007 Oak
103 Whitened oak 101 Birch 107 Light cherry wood
102 Wenge 104 Ebony 105 Whitened Walnut
701 Grey 702 Black
DOTTED RUBBER
304 Leather 305 5WL
108 Dark cherry wood
*Available in AISI 430 or AISI 304
8
MRL liftGreen Lift Fluitronic
Colours & MaterialsCar structure and corners
Ceilings
Ceiling with irregular holes (neon) Standard delivery
Neon with led light pipeCeiling with led spot lights
Landing doors and car door panels
201 Beige 204 Light grey 205 Dark grey
301 Scotch brite* 302 Checkers 303 Linen
304 Leather 305 5WL
Glass
801 Glass
Stainless steel
205 Dark grey 301 Scotch brite*
Stainless steel
*Available in AISI 430 or AISI 304
*Available in AISI 430 or AISI 304
Pre-painted sheet metal(Polimod)
Pre-painted sheet metal(Polimod)
9
LIF
T S
YS
TEM
S
DOORSEasy assembly and adjustment of landing doors.Doors manufactured in Pre-painted sheet metal (Polimod), Scotch Brite stainless steel or anti-vandal stainless steelVery quiet running due to a ball bearing roller on zinc-plated guides to avoid paint residues.Fire-rated landing doors, tested in compliance with EN 81 –58- class E 120 – EI 30 – EI 60 – EI 90 – EI 90 – EI 120Smaller door sills available
HANDRAILHand rail with epoxy painted alloy alluminium junctions.Chromed steel hand rail, 30 mm diameter, complying with EN 81.70 lift rules.
GLASS WALL PANELS Panoramic glass walls withhandrail available
TMC LIFT CAR (tailor made)A tailor made car, with solid but lightweight structure, providing the ideal product for low energy consumption lifts. The simple assembly system allows easy insertion of the car panels, enabling a quick and economic restyling.
LANDING DOORS PUSH-BUTTON
CAR PUSH-BUTTON IN COMPLIANCE WITH EN 81.70 LIFT RULES
CARPUSH-BUTTON
10
MRL liftGreen Lift Fluitronic
A
PL
C
B
D
350
450
450
450
480
480
630
630
4
6
6
6
6
6
8
8
800
950
1000 (*)
1100 (**)
950
1200
1300
1250 (*)
1100 (**)
1300
750
800/850/900
800/850/900
800/850/900
800/850/900
1330
1450/1480/1550
1500/1500/1550
1600
1450/1480/1550
1550
1630
1600
1500
1800
1000 (*)
1100 (*)
1100 (*)
1250 (*)
1400 (*)
1400 (*)
800/850/900
800/900
800/900
1500/1500/1550
1600
1600
1750
1750
1900
A B C DPL
N. of passengers
Payload [kg]
Car dimensions[mm]
Clear door opening [mm]
Min. shaft dimensions with doors opening at side [mm]
1
1
1
1
2 opposite
2 opposite
1
2 opposite
Entrances [No.]
1600
1750/1800/1900
1720/1800/1900
1750/1800/1920
1750/1800/1900
1500
1600
1600
1500
1750
1720/1800/1900
1750/1920
1750/1920
1690
1750
1850
C D
Min. shaft dimensions with central doors opening [mm]
GREEN LIFT FLUITRONIC MRL-T
Standard speeds for each payload
Upward
Downward
Standard speed [m/s]
0,40 0,52 0,62 0,86
0,40 0,48 (***) 0,52 0,62 (***) 0,62 0,74 (***) 0,86 1,00 (***)
(*) Complies with EN 81.70 rules(**) Power unit placed in the shaft rear wall at the car frame side(***) Possibility of downward speed different from upward speed only with electronic valve
MRL-T version: All material is situated in the shaft. Ideal solution when space is very important. Remote controls to be operated outside the shaft.
Available with reduced pit and/or head room
Attention the measurements given in the table are indicative. For any feasibility contact our technical department
Max car travel 17 m
FRONT vIEW(on the bottom floor)
SHAFT PLAN
Standard position of remote controls box
Landing push-button
Alternative position of remote controls box
Cle
ar d
oor o
peni
ng 2
000
mm
Fram
es h
eigh
t 222
5 m
m
Power unit
Controller
Standard position of remote controls box
Landing push-button
Alternative position of remote controls box
SHAFT SECTIONC
lear
doo
r wid
th 2
000
mm
Fram
es h
eigh
t 222
5 m
m
Min
. Hea
droo
m 3
300
mm
max
car
trav
el 1
7 m
Min
. pit
1100
Red
uced
pit
450
mm
Red
uced
hea
droo
m 2
750
mm
Controller placed at first served level
Power unittype MRL-T
11
LIF
T S
YS
TEM
S
Width Depth
Dimensions [mm]Cabinet type
MACHINERy CABINETPayload
[Kg]Height
Hau
teur
Pro
fond
eur
PL
C
DB
A
A B C DPL C D
N. of passengers
Payload [kg]
MRL-MC version: Control panel and drive unit in a cabinet to be positioned in any place at the lowest floor, in order to simplify emergency and maintenance operations. This solution is still a MRL solution, but more convenient.
SHAFT SECTION
(*) In compliance with EN 81.70 rules(**) Possibility of downward speed different from upward speed only with electronic valve.(***) For capacity loads 900/1000 kg: minimum pit 500 mm – minimum headroom 2800 mm
GREEN LIFT FLUITRONIC MRL-MCAvailable with reduced pit and/or head room
Car dimensions[mm]
Clear door opening[mm]
Min. shaft dimensions with doors opening at side [mm]Entrances
[No.]Min. shaft dimensions with central doors opening [mm]
320350450450450480480480630630900 900 920
1000 1000 1025
4466666688121212131313
11111
2 opposite2 opposite2 opposite
12 opposite
12 opposite2 opposite
12 opposite2 opposite
900800950
1000 (*)1100950
1000 (*)1100
1100 (*)1100 (*)
140014001400110011001100
100012001300
1250 (*)11001300
1250 (*)1100
1400 (*)1400 (*)
150015001500211021102110
700/800750
800/850/900800/850/900800/850/900800/850/900800/850/900800/850/900
800/900800/900900/1000900/1000900/1000900/1000900/1000900/1000
1330/14001350
1400/1500/15501450/1500/15501530/1550/15501400/1500/15501450/1500/15501530/1550/1550
155015501850
-1850
1600/1700-
1600/1700
1550/17501600
1750/1800/19001720/1800/19001750/1850/19001750/1800/19001720/1800/19001750/1850/1900
1750/19001750/19002000/21502000/2150
-1950/21501950/2150
-
130015001600155014001740169015501700185018501950
-24202550
-Attention the measurements given in the table are indicative. For any feasibility contact our technical department
13501550165016001450180017501600175019001850
-20002450
-2610
Standard speed [m/s]
Standard speed for each payload up to 630 kg (for other payloads call GMV Technical Office)0,40 0,52 0,62 0,86
0,40 0,48 (**) 0,52 0,62 (**) 0,62 0,74 (**) 0,86 1,00 (**)
UpwardDownward
Controller
Power unit
Hei
ght
Cle
ar d
oor o
peni
ng 2
000
mm
Doo
r fra
mes
hei
ght 2
225
mm
Min
hea
droo
m 3
300
mm
With
redu
ced
head
room
275
0 m
m**
*
Min
. pit
1100
With
redu
ced
pit
450
mm
***
Dep
th
Width
Max car travel: 19 m up to 630 kg - 16 m for higher payloads
870
780
1000
400
350
650
2100
2060
2100
C
D
F
320-630
320-630
900-1025
950 570 2100B 900-1025
max
car
trav
el 1
9 m
This document is for information purposes only. We reserve the right to modify the reported specifications, in any part, without notice. It is recommended that you view actual samples of car finishes, as there may be slight differences than shown in literature.
Partners Distributors*
12.09.2012
ITALIA - GMV S.p.A.20016 Pero (MI) - Via Don Gnocchi, 10Tel. +39 02 339301 - Fax +39 02 3390379e-mail: [email protected]
GMV in the World LIF
T S
YS
TEM
S
BRAZILGMv LATINO AMERICA ELEvADORES LtdaTel. +55 413 3459139www.gmvla.com.br
CANADAOLS-NA Inc.Tel. +1 519 6214563www.oillift.com
CHINABEIJING GMvHyDRAULIC ELEvATOR COMPONENTS Co. LtdTel. +86 10 68032707 / 68578812
CZECH REPUBLICGMV MARTINI CZ s.r.o.Tel/Fax: +420 549211593www.hlc-gmv.cz
FRANCEGMv FRANCETel. +33 [email protected]
GERMANyOILDINAMIC GMv AUFZUGSANTRIEBE GmbHTel. +49 899048352www.oildinamic.de
GREECEOILIFT S.A.Tel. +30 2102756867
QATARAL MAAMOURA LIFTS&ESCALATORS W.L.L.* Tel. +974 4427 1635 / +974 5587 [email protected]
SPAINGMV EUROLIFT, S.A.Tel. +34 937745455www.gmveurolift.es
SWEDENGMv SWEDEN ABTel: +46 47245600www.gmv.se
TURKEyGMv TURKEyTel. +90 212 279 2400www.gmv-turkey.com
BULUT MAKINA ASANSOR*Tel. +90 216 394 5050www.bulutmakina.com
UNITED ARAB EMIRATESGULF ELEVATORS CO. L.L.C.*Tel. +9714 3526599/3524226
UNITED KINGDOMGMv (UK) LtdTel. 0044(0)1912529350www.gmvlifts.co.uk
HUNGARyITALIFT K.F.T.*Tel/Fax. +36 14645263
INDIACOMPONENTO MANUFACTURING& TRADING [email protected]
ISRAELAMBAR FORUM INTERNATIONAL LTD*Tel. +972 39039444
ITALyTECHNOLIFT S.r.l.Tel. +39 0461240786
KOREAEL - TECH LTD.*Tel. +82 25646734
LEBANONNICE LIFT SARL*Tel. +961 3 195793www.nice-lift.com
POLANDGMv POLSKA Sp. z o.o.Tel: +48 226519145www.gmv.pl
PORTUGALSICMALEvA LdaTel. +351 214489350www.sicmaleva.pt