MS01 Version 3 New Print Size Setup Procedure Produced by

MS01 V.3 NEW PRINT SIZE SET-UP

Access the MS01 Maintenance screen

Press the “Windows” Button on the

keyboard then click

Start

Programs

Fes

Maintenance

To access the full product table

and new Print Size Setup

Select:

08 Products

0802 Print Size Setup

Select the unit of measurement to

work with i.e millimeters or inches.

Click 08 Products > 0808 Product

Setup Units

Select mm or inches from the drop

down. Click OK.

For this example we will select

inches.

MS01 ver 3.0 print size setupIssued July 2010 Ver 1.0

Copyright FUJIFILM TECHNICAL SERVICES 2010 2 of 4

Click the New button

The Print Size Setup Dialog Box

will appear in the lower half of the

screen.

Fill in the required fields:

Name: Print size name e.g 6x9

Paper Width: the width of the

paper roll e.g 6 inches

Paper Length: Print size length

e.g 9 inches

Select the required Paper

Surface from the drop down

menu.

Tick the Optional Software

and FDIAB selection boxes.

Ensure you have entered the

correct values into all fields.

Click the Apply button to save the

New Print Size Setup and update

the Products list.

If the print size is required on

theSP3000/SP500 film scanners

choose a scan channel and index

and promo print sizes to complete

the setup

MS01 ver 3.0 print size setupIssued July 2010 Ver 1.0

Copyright FUJIFILM TECHNICAL SERVICES 2010 3 of 4

You will need to restart

your system to access the

new print size in MS01

Close out of the MS01

Maintenance Application

Go back to MS01 View Orders

Screen

Click on Tools

Click the LOG OFF Button and type

the password: operator and click OK

This will exit and re-boot MS01

You will need to repeat this

process to setup the full range

of sizes and surfaces for this

product.

Eg: 6x9B – Glossy Bordered

6x9M – Lustre

6x9S – Lustre and Bordered

MS01 ver 3.0 print size setupIssued July 2010 Ver 1.0

Copyright FUJIFILM TECHNICAL SERVICES 2010 4 of 4