OPERATION OF SINGLE ACTING CYLINDER

OPERATION OF SINGLE ACTING CYLINDER

AIM

To operate single acting cylinder using pneumatic.

APPARATUS REQUIRED

1. Single acting cylinder

2. FRL unit

3. Junction box with slide valve

4. 5/2 hand lever operated spring return valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the single acting cylinder is operated.

OPERATION OF DOUBLE ACTING CYLINDER

OPERATION OF DOUBLE ACTING CYLINDER

AIM

To operate double acting cylinder using pneumatic.

APPARATUS REQUIRED

1. Single acting cylinder

2. FRL unit

3. Junction box with slide valve

4.5/2 hand lever operated spring return valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the double acting cylinder is operated.

IMPULSE PILOT OPERATION OF SINGLE ACTING CYLINDER

IMPULSE PILOT OPERATION OF SINGLE ACTING CYLINDER

AIM

To operate a single acting cylinder using pilot operation.

APPARATUS REQUIRED

1. Single acting cylinder

2. FRL unit

3. Junction box with slide valve

4.5/2 external pilot operated spring return valve

5. Push button valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the impulse pilot operation of single acting cylinder is operated.

OPERATION OF SINGLE ACTING CYLINDER CONTROLLED FROM DIFFERENT POSITIONS USING SHUTTLE VALVE

OPERATION OF SINGLE ACTING CYLINDER CONTROLLED FROM DIFFERENT POSITIONS USING SHUTTLE VALVE

AIM

To operate a single acting cylinder controlled from different positions using shuttle valve.

APPARATUS REQUIRED

1. Single acting cylinder

2. FRL unit

3. Junction box with slide valve

4.5/2 external pilot operated spring return valve

5. Push button valve

6. Shuttle valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the single acting cylinder is controlled from different positions using shuttle valve.

OPERATION OF DOUBLE ACTING CYLINDER USING MEMORY VALVE

OPERATION OF DOUBLE ACTING CYLINDER USING MEMORY VALVE

AIM

To operate a double acting cylinder using memory valve

APPARATUS REQUIRED

1. Double acting cylinder

2. FRL unit

3. Junction box with slide valve

4.5/2 external pilot operated spring return valve

5. Push button valve

6. Flow control valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the to operate a double acting cylinder using memory valve

CONTROLLING THE SPEED OF DAC USING METERING IN VALVE

CONTROLLING THE SPEED OF DAC USING METERING IN VALVE

AIM

To control the speed of DAC using METERING IN valve

APPARATUS REQUIRED

1. FRL unit

2. Junction box with slide valve

3. 5/2 hand lever operated spring return valve

4. Double acting cylinder end position cushioning adjustable on one end

5. Flow control valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the speed of DAC using METERING IN valve is controlled

AUTOMATIC OPERATION OF DOUBLE ACTING CYLINDER IN SINGLE CYCLE USING LIMIT SWITCH AND MEMORY VALVE

AUTOMATIC OPERATION OF DOUBLE ACTING CYLINDER IN SINGLE CYCLE USING LIMIT SWITCH AND MEMORY VALVE

AIM

To operate automatic operation of double acting cylinder in single cycle using limit switch and memory valve.

APPARATUS REQUIRED

1. Double acting cylinder

2. FRL unit

3. Junction box with slide valve

4. 5/2 double external pilot operated valve

5. 3/2 roller lever operated valve with spring return

6. Limit switch

7. Memory valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the double acting cylinder in single cycle using limit switch and memory valve is operated automatically

AUTOMATIC OPERATION OF DOUBLE ACTING CYLINDER IN MULTI CYCLE USING LIMIT SWITCH AND MEMORY VALVE

AUTOMATIC OPERATION OF DOUBLE ACTING CYLINDER IN MULTI CYCLE USING LIMIT SWITCH AND MEMORY VALVE

AIM

To operate automatic operation of double acting cylinder in multi cycle using limit switch and memory valve.

APPARATUS REQUIRED

1. Double acting cylinder

2. FRL unit

3. Junction box with slide valve

4. 5/2 double external pilot operated valve

5. 3/2 roller lever operated valve with spring return

6. Limit switch

7. Memory valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the double acting cylinder in single cycle using limit switch and memory valve is operated automatically

PNEUMATIC SEQUENTIAL OPERATION A+B+A-B-

PNEUMATIC SEQUENTIAL OPERATION A+B+A-B-

AIM

To operate DAC in A+ B+A-B- sequence using pneumatic

APPARATUS REQUIRED

1. Double acting cylinder

2. FRL unit

3. Junction box with slide valve

4. Double solenoid pilot operated valve

5. Switch mode power supply

6. Flow control valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Connect as per the circuits

6. Open the valve and operate cylinder

RESULT

Thus the DAC in A+B+A-B- sequence is operated using pneumatic unit

PNEUMATIC SEQUENTIAL OPERATION A+B+B-A-

PNEUMATIC SEQUENTIAL OPERATION A+B+B-A-

AIM

To operate DAC in A+ B+B-A- sequence using pneumatic

APPARATUS REQUIRED

1. Double acting cylinder

2. FRL unit

3. Junction box with slide valve

4. Double solenoid pilot operated valve

5. Switch mode power supply

6. Flow control valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Connect as per the circuits

6. Open the valve and operate cylinder

RESULT

Thus the DAC in A+B+B-A- sequence is operated using pneumatic unit

OPERATION OF DOUBLE ACTING CYLINDER USING SINGLE SOLENOID VALVE

OPERATION OF DOUBLE ACTING CYLINDER USING SINGLE SOLENOID VALVE

AIM

To operate double acting cylinder using single solenoid valve .

APPARATUS REQUIRED

1. Double acting cylinder

2. FRL unit

3. Junction box with slide valve

4. 5/2 way single solenoid pilot operated valve with spring return valve

5. Flow control valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the double acting cylinder using solenoid valve is operated.

OPERATION OF DOUBLE ACTING CYLINDER USING DOUBLE SOLENOID VALVE

OPERATION OF DOUBLE ACTING CYLINDER USING DOUBLE SOLENOID VALVE

AIM

To operate double acting cylinder using double solenoid valve .

APPARATUS REQUIRED

1. Double acting cylinder

2. FRL unit

3. Junction box with slide valve

4. 5/2 way double solenoid pilot operated valve with spring return valve

5. Flow control valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the double acting cylinder using double solenoid valve is operated.

MULTI CYCLE OPERATION OF DOUBLE ACTING CYLINDER

MULTI CYCLE OPERATION OF DOUBLE ACTING CYLINDER

AIM

To operate double acting cylinder by multi cycle operation.

APPARATUS REQUIRED

1. Single acting cylinder

2. FRL unit

3. Junction box with slide valve

4.5/2 hand lever operated spring return valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the double acting cylinder is operated.

OPERATION OF SINGLE ACTING CYLINDER USING PLC

OPERATION OF SINGLE ACTING CYLINDER USING PLC

AIM

To operate single acting cylinder using pneumatic.

APPARATUS REQUIRED

5. Single acting cylinder

6. FRL unit

7. Junction box with slide valve

8. 5/2 hand lever operated spring return valve

PROCEDURE

6. Connect FRL to main air supply

7. The various components are connected as per the circuits

8. Block the valve openings if necessary

9. Check the leakage of air and correct it

10.Open the valve and operate cylinder

RESULT

Thus the single acting cylinder is operated.

OPERATION OF DOUBLE ACTING CYLINDER USING PLC

OPERATION OF DOUBLE ACTING CYLINDER USING PLC

AIM

To operate double acting cylinder using pneumatic.

APPARATUS REQUIRED

1. Single acting cylinder

2. FRL unit

3. Junction box with slide valve

4.5/2 hand lever operated spring return valve

PROCEDURE

1. Connect FRL to main air supply

2. The various components are connected as per the circuits

3. Block the valve openings if necessary

4. Check the leakage of air and correct it

5. Open the valve and operate cylinder

RESULT

Thus the double acting cylinder is operated.