Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
HZM10 / HZM10LFX Rigging Manual
v1.1 en.
M-SERIES
CONTENTS
General information
HZM10 / HZM10LFX Rigging Manual
Version 1.1 en, 11/2018
Retain this manual for future reference
Hill Pro Audio LTD reserve the right to alter any details or specifications of this product without notice.
Although every attempt has been made to make this manual as concise as possible, no responsibility is taken for errors or omissions.
Hill Pro Audio LTD
Unit 2, Fryor’s court, Murton, York, YO19 5UY
Tel : 03333 445 441 Email : [email protected], www.hillproaudio.co.uk
1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1.1. General safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1.2.1.2. Warnings and symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1.3. Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1.4. User responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 1.5. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2. Operation & Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2.1. Operation & practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2.2. Dispersion setup and rigging options . . . . . . .5 3. Component parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3.1. Component parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 3.2. M10FLY125 Light-duty frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 3.3. M10FLY450 Medium-duty frame . . . . . . . . . . . . . . . . . . . . . .6
4. M10FLY125 (Light-duty) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4.1. Flying mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.2. Pole mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.3. Ground mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. M10FLY450 (Medium-duty) . . . . . . . . . . . . . . . . . . . . . . . . . 11 5.1. Flying mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5.2. Ground mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
6. User Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6.1. Warranty terms & conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6.2. Warranty exclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6.3. Warranty voidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
CONTENTS
3.1. Component Parts
3.2. M10FLY125 Light-duty frame
3 COMPONENT PARTS
6
M10FLYTHOne pole converter + Two 45x8mm pin and ring
M10FLYFLOne 40x8mm quick release pin with shackle converter
M10FLYTPTwo 30x10mm + one 40x8mm quick release pins
3.3. M10FLY450 Medium-duty frame
REF 1Two Crosby 1 1/2t G-209 screw pin bow shackle
M10FLYTPTwo 30x10mm + one 40x8smm quick release pins
Contact your local distributor for replacements or spares.
Hill Pro Audio LTD. Rigging Manual v1.1 en
5,0 - M10FLY4504,0 - M10FLY125
4,1 - Flying mode4,2 - Pole mode4,3 - Ground mode
Hill Pro Audio LTD. Rigging Manual v1.1 en
4 M10FLY125
4. M10FLY125 - Light-duty frame
A versatile way to rig, the M10FLY125 allows a total of 6 HiZ M10 cabinets to hang or ground stack. It is also possible to mount the frame to a pole with the M10FLYTH converter for a total of 4 cabinets.
Fig1 Above: M10FLYTH - In use in the rear hole set.
Fig4 Above: M10FLY125 - Stack on each other or on top of cabinets.
Fig2 Above: M10FLY125 - Ground stack ready with rear foot locked
Fig3 Above: M10FLYFL - In use under standard parameters.
7
4 M10FLY125
5,0 - M10FLY4505,0 - M10FLY450
5,1 - Flying mode5,2 - Ground mode
10
5 M10FLY450
5,1 - Flying mode5,2 - Ground mode
5 M10FLY450
5. M10FLY450 - Medium-duty frame
The M10FLY450 is capable of hanging up to 24 HiZ M10 modules.
Fig17 Above: M10FLYTP - In use in the front hole set.
Fig18 Above: M10FLY125 - Stack on each other or on top of cabinets.
Fig19 Above: M10FLY450 - Ground stack ready locked
Fig20 Above: M10FLYFL - In use under standard parameters.
Hill Pro Audio LTD. Rigging Manual v1.1 en 11
6 USER WARRANTY
6.1. Warranty terms & conditions
All products manufactured by Hill Pro Audio Ltd. are warranted against defects in material and workmanship. The term of the Hill Pro Audio Ltd. Warranty is 5 years from date of the original sale, with the following exception: electro mechanical components, including woofers and compression drivers, which are warranted for 2 years. If any defects are found in the materials or workmanship or if the product fails to function properly during the applicable warranty period, Hill Pro Audio Ltd, at its option, will repair or replace the product.The Hill Pro Audio Ltd. Warranty solely covers the replacement of defective parts and/or the repair of parts as deemed necessary by Hill Pro Audio Ltd. Hill Pro Audio Ltd. does not accept responsibility for the loss of use while the equipment is being repaired nor costs incurred for repairs. Return of products under warranty claim must first be authorized by Hill Pro Audio Ltd. and freight must be paid by the sender.This warranty is not transferable to a second user.
6.2. Warranty Exclusions
1. Damage by improper use and improper or incorrect installation. This includes damage to any parts due to over amplification or connection to an incorrect supply voltage
2. Any damage caused by connection to or operation in conjunction with a signal processing device or amplifier that does not meet the specifications or a device that does not have prior written approval from Hill Pro Audio Ltd.
3. Damage occurring during shipment.
4. Damage caused by neglect or abuse. This includes accidental dropping, penetration of water, incorrect mounting or exposure to excessive temperatures or humidity
5. Damage to any unit, which has been altered or on which the serial number has been defaced, modified or removed
6. Damage from normal wear and tear sustained during normal use
6.3. Warranty Voidance
1. The warranty shall be void by any act of attempted service, alteration, or removal of parts by any third party not specifically authorized by Hill Pro Audio Ltd.
2. The warranty shall be void if it is found that the instructions and procedures for initial start-up and running of the product or equipment have not been followed precisely or that the security procedures have not been fully adhered to
3. The warranty shall be void if parts or accessories not supplied, manufactured or authorized, in writing by the manufacturer, are found to be incorporated in or connected to the product or equipment at any time
4. The warranty shall be void if parts or accessories not supplied, manufactured or authorized, in writing by the manufacturer, are found to be incorporated in or connected to the product or equipment at any time.
Final determination of warranty coverage lies solely with Hill Pro Audio Ltd.
Please refer all warranty claims to your distributor.
14 Hill Pro Audio LTD. Rigging Manual v1.1 en