Procedure for installing Service Manual data

MUT3.pdf

Contents

Chapter 1 System requirements for installation of Service Manual Viewer -- 2 Chapter 2 Procedure for Installing ------------------------------------------------------- 3 2.1 Flow of installation ------------------------------------------------------------ 3 2.2 Installation of Service Manual data --------------------------------------- 4

1

Chapter 1 System requirements for installation of Service Manual Viewer

(1) Hardware · Operating system : Windows2000 or WindowsXP

Caution: The recommended OS is English version in this installer. When you use OS in other languages, some characters may be garbled. There is no problem on the system, so you can keep installing.

· RAM : More than recommended value of operating system · Hard disk : Service Manual Viewer system

10MB of available hard-disk space Hard drive utilization of the Service Manual data

(1)Database for the Service Manual search approx. 20MB (2)Service Manual data approx. 250MB

· Display : Greater than 800X600 pixels resolution and 256 colors

(2) Software · Microsoft Internet Explorer 5.5 or 6.0 · Acrobat Reader 5.0 or later

Caution: A basic software version of M.U.T.-3 should be 1.04.12.01.0 or later, and

a software version of a viewer system should be 1.04.02.27.0 or later.

Trademarks · Microsoft, Windows2000, WindowsXP and Internet Explorer are registered trademarks of

Microsoft Corporation in the United States and/or other countries. · Acrobat ® Reader Copyright © 1987-2001 Adobe Systems Incorporated. All rights reserved.

Adobe, Adobe logo, Adobe Acrobat, and Adobe Acrobat logo are trademarks of Adobe Systems Incorporated.

2

2.1 Flow of installation

Chapter 2 Procedure for installing

Caution: In case of Windows2000 and WindowsXP, installation must be started after login by a user who has authority of the Administrator.

2.2. Installing ServiceManual data

Start

Complete

M.U.T.-3 basic software :1.04.12.01.0

Viewer software :1.04.02.27.0 Installing the same versions

of these softwaresin advance

M.U.T.-3 main menu -Maintenance

- Confirm System Informationin Data update screen.

No

Yes

3

2.2 Installation of Service Manual data

Caution: Confirm that there is enough space in the disk drive before installing.

Required disk space for installation of Service Manual data (S/M) is as follows. (Refer to Chart1)

Chart 1: Required disk space for installation Required disk space

Table for search S/M data Remarks Approx. 20MB - Install only DB data *2 Approx. 20MB Approx. 250MB

*1: It roughly doubles hard drive utilization if the file system on Windows98 is FAT16. *2: In case that only DB data is installed, CD-ROM is required to browse the S/M data.

Caution: Exit all of other applications before installing. (1) When you set CD-ROM in CD drive, installation is automatically started.

Go to (2) on page 5.

In case that installation is not started, right-click Start at the lower-left corner of the desktop and click Explore. (Refer to Figure1)

Figure 1: Running Explore

Then double-click AUTORUN.exe in the CD-ROM. (Refer to Figure 2)

Figure 2: Running AUTORUN.exe

4

(2) Dialog box for confirmation of Service Manual Viewer installation (Figure 3) appears. Click Yes.

Figure 3: Dialog box for confirmation of S/M Viewer installation

Figure 4: InstallShield Wizard

(3) The dialog box for preparation (Figure 4) appears, and then the next dialog box (Figure 5)

for welcome appears.

Start to install Service Manual data. Click Next. (Refer to Figure 5)

Figure 5: Starting installation

5

(4) When you select a model year for installing the Service Manual data, the selected model is highlighted as Figure 6.

After selecting, click Next. (Refer to Figure 6)

Figure 6: Selecting a model year for installation

(5) Select location for installing the Service Manual data.

Select one of the following options. a) Install the DB data and the Service Manual data into a local drive. (Recommended setting)

Install all data (the DB and the S/M) into a disk drive. When you browse the S/M data, CD-ROM is not required. Select this basically. (except if there is not enough space in a disk drive.)

Go to page 7.

b) Install only the DB data into a local drive.

Install only the DB data into a disk drive. In this case, make reference to the S/M data in CD-ROM. When you browse the S/M data, CD-ROM must be set.

Go to page 10.

Figure 7: Selecting location for installation

6

(6) Case 1 - selecting ‘All, DB data and HTML documents will be installed on the Local.’ The image of the Service Manual data is as follows. (Refer to Figure 8)

Figure 9: Selecting location for Installation

a) Select ‘All, DB data and HTML documents will be installed on the Local ’, and click Next. (Refer to Figure 9)

Figure 8DATA

003

5850202020202020

2004 DB

HTML

CSS

SCRIPT

IMG

VER

Destination code

Model code (GRANDIS in this case)

Storage location of the DB data

Appointed e.g. : C:\Program files

MUT3

7

b) Confirm that the directory for installation is displayed properly, and click Next. (Refer to Figure 10)

Figure 10: Indicating the directory for installation

c) After copying files (Refer to Figure 11), Setup Status window appears. (Refer to Figure 12) It takes a few minutes.

Figure 11: Copying files Figure 12: Setup Status window Caution: Just after Setup Status window (Figure 12) is closed, InstallShield Wizard is still

displayed on the task bar. (Refer to Figure 13) It does not mean PC freezing, so wait for a while.

Figure.13 : InstallShield Wizard (task bar indication)

8

d) When the window for completion appears, click Finish.

Figure 14: Completing installation

You complete installing the Service Manual data.

9

(6) Case 2 - selecting ‘Only DB data will be installed on the Local.’ The image of installing the Service Manual data is as follows. (Refer to Figure 15)

Figure 15DATA

003

5850202020202020

2004 DB

VER

Destination code

Model code (GRANDIS in this case)

Storage location of the DB data

Appointed location e.g. : C:\Program files

MUT3

a) Select ‘Only DB data will be installed on the Local.’, and click Next. (Refer to Figure 16)

Figure 16: Selecting location for installing

b) Confirm that the directory for installation is displayed properly, and click NEXT. (Refer to Figure 17)

Figure 17: Indicating the directory for installation

10

c) After copying files (Refer to Figure 18), Setup Status window appeares (Refer to Figure 19). It takes a few minutes.

Figure 18: Copying files

Figure 19: Setup Status window

d) When the window for completion appears, click Finish. (Refer to Figure 20)

Figure 20: Completing installation You complete installing the Service Manual data.

11