Instructions1. Remove packaging from the � re pit on the pallet. 2. Prepare the � replace location by establishing a

level surface about 45” x 45”.

4. Transfer the second layer. Note the 11-inch side of the corner block will now be over the 6.5” side of the corner block beneath.

5. Transfer the third layer. 6. Fill the inside of the � re pit with gravel or base rock a minimum 2 inches deep.

Size: Outside Diameter: 39"x 39" Inside Diameter: 23"x23"

Piece Count: 12" Tapered Units: 24 Corner Units: 12

Fire pits should only be built over a non-combustible surface like concrete patios or a compacted gravel base. Never install a � re pit over a wood deck.

3. Transfer the top layer of the � replace to desired location. This will become the bottom layer of the � re pit. Note: Transferring one layer at a time be-fore the next layer will help maintain the proper orientation of the corner pieces.

MUTUAL MATERIALS INSTALLATION INSTRUCTIONS Mutual Fire Pit Kits

Mutual Square 39" Fire Pit