Instructions1. Remove packaging from the � re pit on the pallet.
2. Prepare the � replace location by establishing a
level surface about 45” x 45”.
4. Transfer the second layer. Note the 11-inch side of the
corner block will now be over the 6.5” side of the corner block
beneath.
5. Transfer the third layer. 6. Fill the inside of the � re pit
with gravel or base rock a minimum 2 inches deep.
Size: Outside Diameter: 39"x 39" Inside Diameter: 23"x23"
Piece Count: 12" Tapered Units: 24 Corner Units: 12
Fire pits should only be built over a non-combustible surface
like concrete patios or a compacted gravel base. Never install a �
re pit over a wood deck.
3. Transfer the top layer of the � replace to desired location.
This will become the bottom layer of the � re pit. Note:
Transferring one layer at a time be-fore the next layer will help
maintain the proper orientation of the corner pieces.
MUTUAL MATERIALS INSTALLATION INSTRUCTIONS Mutual Fire Pit
Kits
Mutual Square 39" Fire Pit
