Embed Size (px)
Citation preview
Gradhermetic
Gateway
Motor Control
Product Informations
Via G.Toniolo, 28
30030 Vigonovo (VE)
www.stitalia.com – [email protected]
Connected to the Gradhermetic Somfy world :
This device allows you to interface your blinds
type Gradhermetic equipped with Somfy motor,
to My home Bticino building automation plant.
The main function is to control, with commands
from an actuator Bticino, the ISG type com-
mands like ISG 80 ISG 83 with very precise timing.
Take advantage of Gradhermetic technology :
General commands can be sent from IP H4684
touch screen using a specific firmware, provided
as an accessory and a cost aside from St italia,
which adds to both the capabilities of single com-
mand, using a convenient General Management
page.
What is required for use with My Home :
You use a command button 3477 propelled by a
double H/NT/L/a, actuator F411 4036/2 connected
to ST half cords ITALY orange and yellow in the en-
trance to the interface and middle white pink grey
cables 3 leaving the interface to the contacts A
and B of the Somfy command.
3477 command configures and manages the
mode PUL F411/2 so that it can be posted on clos-
ing control of relay 2 contemporary. 3477 and
commands the actuators F411/2 must be mounted
on a branch of independent bus, connected to
the rest of the plant of F422 interface.
Example of Gradhermetic firmware for Touch 3,5”
Inputs
Outputs
Power
Product Informations
Via G.Toniolo, 28
30030 Vigonovo (VE)
www.stitalia.com – [email protected]
Gradhermetic Gateway connections :
Inputs:
Input 1 Yellow/Yellow, the cables are connected to contacts 1 and 2 of
article F411/2.
Input 2 Orange/Orange, the cables are connected to contacts 3 and 4 of
article F411/2.
Power supply:
Blue/Blue cables will be connected indiscriminately to PSU, if you use the
PSU Bticino Art. 346000 do not connect more than 20 interfaces, if it ex-
ceeds is not guaranteed the correctly operation of the devices.
Outputs:
Output 1 Gray will be connected to contact 1 of Somfy command.
Output 2 Rose will be connected to contact 2 of Somfy command. Com-
mon White Outputs will be connected to contact 3 of Somfy command.
Technical data:
Power : DC 27 V
Absorption : Max 50mA
Temp. : 0 °C - +55 °C
Humidity : 80%
IP Grade : IP 42
Dimensions : 50 x 70 x 22 mm
Colour : Black RAL 7011
Input : Need Clean contact
Output : Clean contact
Diffusion :
Sell in all world from September 2007
Gradhermetic
Gateway
Motor Control
Inputs
Outputs
