Nat Type Change

Speed Touch and Thomson Modems

Steps

• Disable uPNP• Static Ip on Console• Putty Download• Telnet Procedure

Disable uPNP

• Type 192.168.10.254 on browser• Go to Toolbox and then to Game and

Application Sharing• Click Configure• Uncheck uPNP and click apply

Screenshots

uPNP Screenshots

Steps

Static Ip On Console• Click on Home Network• Click on your device (This can be either on

Wireless or Ethernet , and normally it should start with unknown.)

• Click on Configure• Check the option “Always use the same ip

address.• Write down the ip address (e.g

192.168.10.1)• Click Apply to save the settings

Screenshots

Static Ip On Console

Next

Static Ip On Console 2

Next

Static Ip On Console 3

Back

Putty Download

• Search Google for Putty Download• Click on the Putty Download Page• Under the Windows x86 , click on the

putty.exe to download and save it in the computer

• Linkhttp://www.chiark.greenend.org.uk/

~sgtatham/putty/download.html

Steps

Telnet Procedure

• Open Putty.exe• Input on Host Name the address

192.168.10.254 (1)• Click on Telnet (2)• Click on Open (3)• When the program opens , put

“cytadsl” for username• For Password input “cytaspeed”

Next

Telnet Procedure 2

• When the telnet open completely , we need to input the command nat tmpladd intf=pppInternet type=nat outside_addr=0.0.0.1 inside_addr=192.168.10.4 , changing the number 4 with the number of the ip address we had on the modem and clicking enter after that

• Write saveall• Write exit

Screenshots

Telnet Procedure Screenshots

Putty Interface

1

2

3

Put cytadsl as username ,press enter ,cytaspeed as password press enter .Follow the instructions on slide 11

Steps