Embed Size (px)
Citation preview
GRUNDFOS DATA BOOKLET
NB, NBG, NK, NKG125-400/150-125-400/150-315.1/ 200-150-315.1
According to EN 733 or ISO 285860 Hz
Ta
ble
of c
on
ten
ts
2
NB, NBG, NK, NKG
1. Introduction 3Introduction 3
2. Performance range 4NB, 2-pole 4NK, 2-pole 5NBG, 2-pole 6NKG, 2-pole 7NB, 4-pole 8NK, 4-pole 9NBG, 4-pole 10NKG, 4-pole 11NB, 6-pole 12NK, 6-pole 13NBG, 6-pole 14NKG, 6-pole 15
3. Product range 16NBG, NKG, 2-pole 16NB, NK, 4-pole 17NBG, NKG, 4-pole 17NB, NK, 6-pole 18NBG, NKG, 6-pole 18
4. NK/NKG bare shaft pumps 19NK/NKG, centre-line outlet 19Overview 19
5. Performance curves and technical data 20NBG, NKG 2-pole 20NB, NK 4-pole 22NBG, NKG 4-pole 26NB, NK 6-pole 30NBG, NKG 6-pole 34
6. Base frames 39Dimensional sketches forNK, NKE, NKG, NKGE base frames 39NB base frames 40
7. Further product documentation 41WebCAPS 41WinCAPS 42
Intr
od
uc
tio
n
NB, NBG, NK, NKG 1
1. Introduction
IntroductionThis data booklet describes an extension of the NB, NBG, NK, NKG product range and thus of the complete end-suction performance range. The new pumps are designed according to EN 733 or ISO 2858. Information not specified in this data booklet can be found in the NB, NBE, NK, NKE data booklet, product no 96695638, and the NBG, NBGE, NGK, NKGE data booklet, product no 96695640.
The NB/NK 125-400 and the NBG/NKG 150-125-400 performance curves in this data booklet are updated with regard to efficiency and NPSH.
The NB/NK 150-315.1 and the NBG/NKG 200-150-315.1 are new pump models featuring improved duty points.
The pumps can be seen as a supplement to the existing NB/NK 150-315 and NBG/NKG 200-150-315 as all installation dimensions are same.
3
Pe
rform
an
ce
ran
ge
4
NB, NBG, NK, NKG2
2. Performance range
NB, 2-pole
TM
05
43
02
22
12
TM
05
43
03
22
12
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
10
12
15
20
30
40
50
60
70
80
100
120
150
200
[m]H
NB2-pole, 60 Hz
Cast Iron
125-250
100-250
80-160
65-200
50-200
40-250 65-250
150-200
125-200
100-200
80-25032-250
80-200
65-160
65-125
50-160
50-125
40-200
40-160
40-125
32-200
32-160
32-125
32-200.1
32-160.1
32-125.1
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
10
12
15
20
30
40
50
60
70
80
100
120
150
200
[m]H
NB2-pole, 60 Hz
Stainless Steel
65-250
125-250
100-250
80-160
65-200
50-200
40-250
150-200
125-200
100-200
80-25032-250
80-200
65-160
65-125
50-160
50-125
40-200
40-160
40-125
32-200
32-160
32-125
32-200.1
32-160.1
32-125.1
Pe
rfo
rma
nc
e r
an
ge
NB, NBG, NK, NKG 2
NK, 2-pole
TM
05
43
04
22
12
TM
05
43
05
22
12
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
10
12
15
20
30
40
50
60
70
80
100
120
150
200
[m]H
NK2-pole, 60 Hz
Cast Iron
65-250
125-250
150-200
125-200
100-250
100-200
100-160
80-25050-25040-25032-250
80-200
80-160
65-200
65-160
65-125
50-200
50-160
50-125
40-200
40-160
40-125
32-200
32-160
32-125
32-200.1
32-160.1
32-125.1
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
10
12
15
20
30
40
50
60
70
80
100
120
150
200
[m]H
NK2-pole, 60 Hz
Stainless Steel
125-250
65-250
150-200
125-200
100-250
100-200
100-160
80-25050-25040-25032-250
80-200
80-160
65-200
65-160
65-125
50-200
50-160
50-125
40-200
40-160
40-125
32-200
32-160
32-125
32-200.1
32-160.1
32-125.1
5
Pe
rform
an
ce
ran
ge
6
NB, NBG, NK, NKG2
NBG, 2-pole
TM
05
43
06
22
12
TM
05
43
07
22
12
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
10
12
15
20
30
40
50
60
70
80
100
120
150
200
[m]H
NBG2-pole, 60 Hz
Cast Iron
150-125-250125-100-250
125-80-160
100-65-200
80-50-200
65-40-250
200-150-200
150-125-200
125-100-200
125-80-250100-65-25050-32-250
125-80-200
100-80-160
100-80-125
80-65-160
80-65-125
65-40-200
65-50-160
65-50-125
50-32-200
50-32-160
50-32-125
50-32-200.1
50-32-160.1
50-32-125.1
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
10
12
15
20
30
40
50
60
70
80
100
120
150
200
[m]H
NBG2-pole, 60 Hz
Stainless Steel
125-80-250100-65-250
150-125-250125-100-250
125-80-160
100-65-200
80-50-200
65-40-250
200-150-200
150-125-200
125-100-200
50-32-250
125-80-200
100-80-160
100-80-125
80-65-160
80-65-125
65-40-200
65-50-160
65-50-125
50-32-200
50-32-160
50-32-125
50-32-200.1
50-32-160.1
50-32-125.1
Pe
rfo
rma
nc
e r
an
ge
NB, NBG, NK, NKG 2
NKG, 2-pole
TM
05
43
08
22
12
TM
05
43
09
22
12
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
10
12
15
20
30
40
50
60
70
80
100
120
150
200
[m]H
NKG2-pole, 60 Hz
Cast Iron200-150-315.1
200-150-250
200-150-200
150-125-250
150-125-200
125-100-250
125-100-200
125-100-160
125-80-250100-65-25080-50-25065-40-25050-32-250
125-80-200
125-80-160
100-65-200
100-80-160
100-80-125
80-50-200
80-65-160
80-65-125
65-40-200
65-50-160
65-50-125
50-32-200
50-32-160
50-32-125
50-32-200.1
50-32-160.1
50-32-125.1
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
10
12
15
20
30
40
50
60
70
80
100
120
150
200
[m]H
NKG2-pole, 60 Hz
Stainless Steel200-150-315.1
150-125-250125-100-250
125-80-250100-65-250
200-150-250
200-150-200
150-125-200
125-100-200
125-100-160
80-50-25065-40-25050-32-250
125-80-200
125-80-160
100-65-200
100-80-160
100-80-125
80-50-200
80-65-160
80-65-125
65-40-200
65-50-160
65-50-125
50-32-200
50-32-160
50-32-125
50-32-200.1
50-32-160.1
50-32-125.1
7
Pe
rform
an
ce
ran
ge
8
NB, NBG, NK, NKG2
NB, 4-pole
TM
05
43
10
22
12
TM
05
43
11 2
21
2
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500Q [m³/h]
4
5
6
7
8
10
12
15
20
30
40
50
60
70
80
100
120
150
[m]H
NB4-pole, 60 Hz
Cast Iron
125-400
150-315.1
200-450
250-400
150-400
125-500
200-400
250-350
150-315
150-250
150-200
125-315
125-200
100-400
100-160
80-400
65-250
50-31540-315
32-250 125-250
100-315
100-250
100-200
80-315
80-250
80-200
80-160
65-315
65-200
65-160
65-125
50-250
50-200
50-160
50-125
40-250
40-200
40-160
40-125
32-200
32-160
32-125
32-200.1
32-160.1
32-125.1
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500Q [m³/h]
4
5
6
7
8
10
12
15
20
30
40
50
60
70
80
100
120
150
[m]H
NB4-pole, 60 Hz
Stainless Steel
125-400
150-315.1
150-400
125-500
150-315
150-250
150-200
125-315
125-200
100-400
100-160
80-400
65-250
50-31540-315
32-250 125-250
100-315
100-250
100-200
80-315
80-250
80-200
80-160
65-315
65-200
65-160
65-125
50-250
50-200
50-160
50-125
40-250
40-200
40-160
40-125
32-200
32-160
32-125
32-200.1
32-160.1
32-125.1
Pe
rfo
rma
nc
e r
an
ge
NB, NBG, NK, NKG 2
NK, 4-pole
TM
05
43
12
22
12
TM
05
43
13
22
12
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500Q [m³/h]
4
5
6
7
8
10
12
15
20
30
40
50
60
70
80
100
120
150
[m]H
NK4-pole, 60 Hz
Cast Iron
125-400
150-315.1
250-450
250-400
200-450
200-400
250-350
150-400
150-315
150-250
150-200
125-500
125-315
125-200
100-400
100-160
80-400
65-250
50-31540-315
32-250 125-250
100-315
100-250
100-200
80-315
80-250
80-200
80-160
65-315
65-200
65-160
65-125
50-250
50-200
50-160
50-125
40-250
40-200
40-160
40-125
32-200
32-160
32-125
32-200.1
32-160.1
32-125.1
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500Q [m³/h]
4
5
6
7
8
10
12
15
20
30
40
50
60
70
80
100
120
150
[m]H
NK4-pole, 60 Hz
Stainless Steel
125-400
150-315.1
150-400
150-315
150-250
150-200
125-500
125-315
125-200
100-400
100-160
80-400
65-250
50-31540-315
32-250 125-250
100-315
100-250
100-200
80-315
80-250
80-200
80-160
65-315
65-200
65-160
65-125
50-250
50-200
50-160
50-125
40-250
40-200
40-160
40-125
32-200
32-160
32-125
32-200.1
32-160.1
32-125.1
9
Pe
rform
an
ce
ran
ge
10
NB, NBG, NK, NKG2
NBG, 4-pole
TM
05
43
14
22
12
TM
05
43
15
22
12
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500Q [m³/h]
4
5
6
7
8
10
12
15
20
30
40
50
60
70
80
100
120
150
[m]H
NBG4-pole, 60 Hz
Cast Iron
150-125-400
200-150-315.1
300-250-400
250-200-450200-150-400
150-125-500
300-250-350
250-200-400
200-150-315
200-150-250
200-150-200
150-125-315
150-125-200
125-100-400
125-100-160
125-80-400
100-65-250
80-50-31565-40-315
50-32-250 150-125-250
125-100-315
125-100-250
125-100-200
125-80-315
125-80-250
125-80-200
125-80-160
100-65-315
100-65-200
100-80-160
100-80-125
80-50-250
80-50-200
80-65-160
80-65-125
65-40-250
65-40-200
65-50-160
65-50-125
50-32-200
50-32-160
50-32-125
50-32-200.1
50-32-160.1
50-32-125.1
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500Q [m³/h]
4
5
6
7
8
10
12
15
20
30
40
50
60
70
80
100
120
150
[m]H
NBG4-pole, 60 Hz
Stainless Steel
150-125-400
200-150-315.1
250-200-450
150-125-500
200-150-315
200-150-250
200-150-200
150-125-315
150-125-200
125-100-400
125-100-160
125-80-400
100-65-250
80-50-31565-40-315
50-32-250 150-125-250
125-100-315
125-100-250
125-100-200
125-80-315
125-80-250
125-80-200
125-80-160
100-65-315
100-65-200
100-80-160
100-80-125
80-50-250
80-50-200
80-65-160
80-65-125
65-40-250
65-40-200
65-50-160
65-50-125
50-32-200
50-32-160
50-32-125
50-32-200.1
50-32-160.1
50-32-125.1
Pe
rfo
rma
nc
e r
an
ge
NB, NBG, NK, NKG 2
NKG, 4-pole
TM
05
43
16
22
12
TM
05
43
17
22
12
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500Q [m³/h]
4
5
6
7
8
10
12
15
20
30
40
50
60
70
80
100
120
150
[m]H
NKG4-pole, 60 Hz
Cast Iron
150-125-400
200-150-315.1
300-250-350
300-250-500
300-250-450
300-250-400
250-200-450
250-200-400
200-150-500
200-150-400
200-150-315
200-150-250
200-150-200
150-125-500
150-125-315
150-125-200
125-100-400
125-100-160
125-80-400
100-65-250
80-50-31565-40-315
50-32-250 150-125-250
125-100-315
125-100-250
125-100-200
125-80-315
125-80-250
125-80-200
125-80-160
100-65-315
100-65-200
100-80-160
100-80-125
80-50-250
80-50-200
80-65-160
80-65-125
65-40-250
65-40-200
65-50-160
65-50-125
50-32-200
50-32-160
50-32-125
50-32-200.1
50-32-160.1
50-32-125.1
4 5 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000 1500Q [m³/h]
4
5
6
7
8
10
12
15
20
30
40
50
60
70
80
100
120
150
[m]H
NKG4-pole, 60 Hz
Stainless Steel
150-125-400
200-150-315.1
200-150-500
200-150-400
200-150-315
200-150-250
200-150-200
150-125-500
150-125-315
150-125-200
125-100-400
125-100-160
125-80-400
100-65-250
80-50-31565-40-315
50-32-250 150-125-250
125-100-315
125-100-250
125-100-200
125-80-315
125-80-250
125-80-200
125-80-160
100-65-315
100-65-200
100-80-160
100-80-125
80-50-250
80-50-200
80-65-160
80-65-125
65-40-250
65-40-200
65-50-160
65-50-125
50-32-200
50-32-160
50-32-125
50-32-200.1
50-32-160.1
50-32-125.1
11
Pe
rform
an
ce
ran
ge
12
NB, NBG, NK, NKG2
NB, 6-pole
TM
05
43
18
22
12
TM
05
43
19
22
12
10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
2
3
4
5
6
7
89
10
15
20
30
40
50
60
70
80
[m]H
NB6-pole, 60 Hz
Cast Iron
125-400
150-315.1
250-500
250-450
250-400
200-450
200-400
250-350
150-500
150-400
150-315
150-250
150-200
125-500
125-315
125-200
100-400
100-160
125-250
100-315
100-250
100-200
10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
2
3
4
5
6
7
89
10
15
20
30
40
50
60
70
80
[m]H
NB6-pole, 60 Hz
Stainless Steel
125-400
150-315.1
150-500
150-400
150-315
150-250
150-200
125-500
125-315
125-200
100-400
100-160
125-250
100-315
100-250
100-200
Pe
rfo
rma
nc
e r
an
ge
NB, NBG, NK, NKG 2
NK, 6-pole
TM
05
43
20
22
12
TM
05
43
21
22
12
10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
2
3
4
5
6
7
89
10
15
20
30
40
50
60
70
80
[m]H
NK6-pole, 60 Hz
Cast Iron
125-400
150-315.1
250-500
250-450
250-400
200-450
200-400
250-350
150-500
150-400
150-315
150-250
150-200
125-500
125-315
125-200
100-400
100-160
125-250
100-315
100-250
100-200
10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
2
3
4
5
6
7
89
10
15
20
30
40
50
60
70
80
[m]H
NK6-pole, 60 Hz
Stainless Steel
125-400
150-315.1
150-500
150-400
150-315
150-250
150-200
125-500
125-315
125-200
100-400
100-160
125-250
100-315
100-250
100-200
13
Pe
rform
an
ce
ran
ge
14
NB, NBG, NK, NKG2
NBG, 6-pole
TM
05
43
22
22
12
TM
05
43
23
22
12
10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
2
3
4
5
6
7
89
10
15
20
30
40
50
60
70
80
[m]H
NBG6-pole, 60 Hz
Cast Iron
150-125-400
200-150-315.1
300-250-350
300-250-500
300-250-400
300-250-450250-200-450
250-200-400
200-150-500
200-150-400
200-150-315
200-150-250
200-150-200
150-125-500
150-125-315
150-125-200
125-100-400
125-100-160
150-125-250
125-100-315
125-100-250
125-100-200
10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
2
3
4
5
6
7
89
10
15
20
30
40
50
60
70
80
[m]H
NBG6-pole, 60 Hz
Stainless Steel
150-125-400
200-150-315.1
200-150-500
200-150-400
200-150-315
200-150-250
200-150-200
150-125-500
150-125-315
150-125-200
125-100-400
125-100-160
150-125-250
125-100-315
125-100-250
125-100-200
Pe
rfo
rma
nc
e r
an
ge
NB, NBG, NK, NKG 2
NKG, 6-pole
TM
05
43
24
22
12
TM
05
43
25
22
12
10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
2
3
4
5
6
7
89
10
15
20
30
40
50
60
70
80
[m]H
NKG6-pole, 60 Hz
Cast Iron
150-125-400
200-150-315.1
300-250-350
300-250-500
300-250-400
300-250-450250-200-450
250-200-400
200-150-500
200-150-400
200-150-315
200-150-250
200-150-200
150-125-500
150-125-315
150-125-200
125-100-400
125-100-160
150-125-250
125-100-315
125-100-250
125-100-200
10 15 20 30 40 50 60 80 100 150 200 300 400 500 600 800 1000Q [m³/h]
2
3
4
5
6
7
89
10
15
20
30
40
50
60
70
80
[m]H
NKG6-pole, 60 Hz
Stainless Steel
150-125-400
200-150-315.1
200-150-500
200-150-400
200-150-315
200-150-250
200-150-200
150-125-500
150-125-315
150-125-200
125-100-400
125-100-160
150-125-250
125-100-315
125-100-250
125-100-200
15
Pro
du
ct ra
ng
e
16
NB, NBG, NK, NKG3
3. Product range
The tables on the following pages show the product ranges of NB, NK 125-400, NBG, NKG 150-125-400, NB, NK 150-315.1 and NBG, NKG 200-150-315.1 pumps.
NBG, NKG, 2-pole
1) F = fixed flange. L = loose flange.
60 Hz, 2-pole NBG pumps NKG pumps Cast iron pumpStainless steel
pump
d5
[m
m]
Sh
aft
se
al
dia
me
ter
[mm
]
Pu
mp
ty
pe
P2
[k
W]
E-s
olu
tio
n
Ov
ers
ize
sh
aft
NB
G d
es
ign
Material code
OptionsMaterial
codeOptions
Flange rating 1)
Flange standard
Flange rating 1)
Flange standard
A,
B,
C,
D,
S
E,
F,
G,
H
K,
L,
M
N,
R,
P
Do
ub
le s
ea
l a
rra
ng
em
en
t
Ca
rtri
dg
e s
ea
l -
sin
gle
/do
ub
le
Pu
mp
ho
us
ing
wit
h f
ee
t
Pu
mp
wit
h b
as
e f
ram
e
A,
B,
C,
D,
S
E,
F,
G,
H
K,
L,
M
N,
R,
P
Stu
ffin
g b
ox
, c
as
t ir
on
on
ly
Do
ub
le s
ea
l a
rra
ng
em
en
t
Ca
rtri
dg
e s
ea
l -
sin
gle
/do
ub
le
Sta
nd
ard
be
ari
ng
bra
ck
et
He
av
y d
uty
be
ari
ng
bra
ck
et
PN
10
PN
16
DIN
(c
od
e F
)
AN
SI
(co
de
G)
JIS
(c
od
e J
)
PN
16
PN
25
PN
40
DIN
(c
od
e F
)
AN
SI
(co
de
G)
JIS
(c
od
e J
)
200-150-315.1353 - - - - - - - - - - - ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 48 55
398 - - - - - - - - - - - ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 48 55
Pro
du
ct
ran
ge
NB, NBG, NK, NKG 3
NB, NK, 4-pole
1) F = fixed flange. L = loose flange.
NBG, NKG, 4-pole
1) F = fixed flange. L = loose flange.
60 Hz, 4-pole NB pumps NK pumps Cast iron pumpStainless steel
pump
d5
[m
m]
Sh
aft
se
al
dia
me
ter
[mm
]
Pu
mp
ty
pe
P2
[k
W]
E-s
olu
tio
n
Ov
ers
ize
sh
aft
NB
de
sig
n
Material code
OptionsMaterial
codeOptions
Flange rating 1)
Flange standard
Flange rating 1)
Flange standard
A,
B,
C,
D,
S
E,
F,
G,
H
K,
L,
M
N,
R,
P
Do
ub
le s
ea
l a
rra
ng
em
en
t
Ca
rtri
dg
e s
ea
l -
sin
gle
/do
ub
le
Pu
mp
ho
us
ing
wit
h f
ee
t
Pu
mp
wit
h b
as
e f
ram
e
A,
B,
C,
D,
S
E,
F,
G,
H
K,
L,
M
N,
R,
P
Stu
ffin
g b
ox
(o
nly
ca
st
iro
n v
ers
ion
s)
Do
ub
le s
ea
l a
rra
ng
em
en
t
Ca
rtri
dg
e s
ea
l -
sin
gle
/do
ub
le
Sta
nd
ard
be
ari
ng
bra
ck
et
He
av
y-d
uty
be
ari
ng
bra
ck
et
PN
10
PN
16
DIN
(c
od
e F
)
AN
SI
(co
de
G)
JIS
(c
od
e J
)
PN
10
PN
16
DIN
(c
od
e F
)
AN
SI
(co
de
G)
JIS
(c
od
e J
)
125-400
55 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F F ● - - L L ● - - 42 48
75 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F F ● - - L L ● - - 42 48
90 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F F ● - - L L ● - - 42 48
110 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F F ● - - L L ● - - 42 48
132 CUE - C ● - ● - - - - ● ● - ● - - - - ● - F F ● - - L L ● - - 42 48
150-315.1
30 CUE - C ● - ● ● - - - - ● - ● ● - - - ● - F - ● - - L L ● - - 42 48
37 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F - ● - - L L ● - - 42 48
45 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F - ● - - L L ● - - 42 48
55 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F - ● - - L L ● - - 42 48
75 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F - ● - - L L ● - - 42 48
60 Hz, 4-pole NBG pumps NKG pumps Cast iron pumpStainless steel
pump
d5
[m
m]
Sh
aft
se
al
dia
me
ter
[mm
]
Pu
mp
ty
pe
P2
[k
W]
E-s
olu
tio
n
Ov
ers
ize
sh
aft
NB
G d
es
ign
Material code
OptionsMaterial
codeOptions
Flange rating 1)
Flange standard
Flange rating 1)
Flange standard
A,
B,
C,
D,
S
E,
F,
G,
H
K,
L,
M
N,
R,
P
Do
ub
le s
ea
l a
rra
ng
em
en
t
Ca
rtri
dg
e s
ea
l -
sin
gle
/do
ub
le
Pu
mp
ho
us
ing
wit
h f
ee
t
Pu
mp
wit
h b
as
e f
ram
e
A,
B,
C,
D,
S
E,
F,
G,
H
K,
L,
M
N,
R,
P
Stu
ffin
g b
ox
, (c
as
t ir
on
on
ly)
Do
ub
le s
ea
l a
rra
ng
em
en
t
Ca
rtri
dg
e s
ea
l -
sin
gle
/do
ub
le
Sta
nd
ard
be
ari
ng
bra
ck
et
He
av
y d
uty
be
ari
ng
bra
ck
et
PN
10
PN
16
DIN
(c
od
e F
)
AN
SI
(co
de
G)
JIS
(c
od
e J
)
PN
16
PN
25
PN
40
DIN
(c
od
e F
)
AN
SI
(co
de
G)
JIS
(c
od
e J
)
150-125-400
55 CUE - C ● - ● ● - - - ● ● - ● ● - ● ● ● ● F F ● - - L L L ● ● ● 42 48
75 CUE - C ● - ● ● - - - ● ● - ● ● - ● ● ● ● F F ● - - L L L ● ● ● 42 48
90 CUE - C ● - ● ● - - - ● ● - ● ● - ● ● ● ● F F ● - - L L L ● ● ● 42 48
110 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● F F ● - - L L L ● ● ● 42 48
110 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● F F ● - - L L L ● ● ● 42 48
132 CUE - C ● - ● - - - - - ● - ● - - ● ● ● ● F F ● - - L L L ● ● ● 42 48
200-150-315.1
30 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 48 55
37 CUE - C ● - ● ● - - - ● ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 48 55
45 CUE - C ● - ● ● - - - ● ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 48 55
55 CUE - C ● - ● ● - - - ● ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 48 55
75 CUE - C ● - ● ● - - - ● ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 48 55
17
Pro
du
ct ra
ng
e
18
NB, NBG, NK, NKG3
NB, NK, 6-pole
1) F = fixed flange. L = loose flange.
NBG, NKG, 6-pole
1) F = fixed flange. L = loose flange.
60 Hz, 6-pole NB pumps NK pumps Cast iron pumpStainless steel
pump
d5
[m
m]
Sh
aft
se
al
dia
me
ter
[mm
]
Pu
mp
ty
pe
P2
[k
W]
E-s
olu
tio
n
Ov
ers
ize
sh
aft
NB
de
sig
n
Material code
OptionsMaterial
codeOptions
Flange rating 1)
Flange standard
Flange rating 1)
Flange standard
A,
B,
C,
D,
S
E,
F,
G,
H
K,
L,
M
N,
R,
P
Do
ub
le s
ea
l a
rra
ng
em
en
t
Ca
rtri
dg
e s
ea
l -
sin
gle
/do
ub
le
Pu
mp
ho
us
ing
wit
h f
ee
t
Pu
mp
wit
h b
as
e f
ram
e
A,
B,
C,
D,
S
E,
F,
G,
H
K,
L,
M
N,
R,
P
Stu
ffin
g b
ox
(o
nly
ca
st
iro
n v
ers
ion
s)
Do
ub
le s
ea
l a
rra
ng
em
en
t
Ca
rtri
dg
e s
ea
l -
sin
gle
/do
ub
le
Sta
nd
ard
be
ari
ng
bra
ck
et
He
av
y-d
uty
be
ari
ng
bra
ck
et
PN
10
PN
16
DIN
(c
od
e F
)
AN
SI
(co
de
G)
JIS
(c
od
e J
)
PN
10
PN
16
DIN
(c
od
e F
)
AN
SI
(co
de
G)
JIS
(c
od
e J
)
125-400
18.5 CUE - C ● - ● ● - - - - ● - ● ● - - - ● - F F ● - - L L ● - - 42 48
22 CUE - C ● - ● ● - - - - ● - ● ● - - - ● - F F ● - - L L ● - - 42 48
30 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F F ● - - L L ● - - 42 48
37 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F F ● - - L L ● - - 42 48
45 CUE - C ● - ● ● - - - ● ● - ● ● - - - ● - F F ● - - L L ● - - 42 48
150-315.1
7.5 CUE - C ● - ● ● - - - - ● - ● ● - - - ● - F - ● - - L L ● - - 42 48
11 CUE - C ● - ● ● - - - - ● - ● ● - - - ● - F - ● - - L L ● - - 42 48
15 CUE - C ● - ● ● - - - - ● - ● ● - - - ● - F - ● - - L L ● - - 42 48
18.5 CUE - C ● - ● ● - - - - ● - ● ● - - - ● - F - ● - - L L ● - - 42 48
22 CUE - C ● - ● ● - - - - ● - ● ● - - - ● - F - ● - - L L ● - - 42 48
60 Hz, 6-pole NBG pumps NKG pumps Cast iron pumpStainless steel
pump
d5
[m
m]
Sh
aft
se
al
dia
me
ter
[mm
]
Pu
mp
ty
pe
P2
[k
W]
E-s
olu
tio
n
Ov
ers
ize
sh
aft
NB
G d
es
ign
Material code
OptionsMaterial
codeOptions
Flange rating 1)
Flange standard
Flange rating 1)
Flange standard
A,
B,
C,
D,
S
E,
F,
G,
H
K,
L,
M
N,
R,
P
Do
ub
le s
ea
l a
rra
ng
em
en
t
Ca
rtri
dg
e s
ea
l -
sin
gle
/do
ub
le
Pu
mp
ho
us
ing
wit
h f
ee
t
Pu
mp
wit
h b
as
e f
ram
e
A,
B,
C,
D,
S
E,
F,
G,
H
K,
L,
M
N,
R,
P
Stu
ffin
g b
ox
, c
as
t ir
on
on
ly
Do
ub
le s
ea
l a
rra
ng
em
en
t
Ca
rtri
dg
e s
ea
l -
sin
gle
/do
ub
le
Sta
nd
ard
be
ari
ng
bra
ck
et
He
av
y d
uty
be
ari
ng
bra
ck
et
PN
10
PN
16
DIN
(c
od
e F
)
AN
SI
(co
de
G)
JIS
(c
od
e J
)
PN
16
PN
25
PN
40
DIN
(c
od
e F
)
AN
SI
(co
de
G)
JIS
(c
od
e J
)
150-125-400
18.5 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● F F ● - - L L L ● ● ● 42 48
22 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● F F ● - - L L L ● ● ● 42 48
30 CUE - C ● - ● ● - - - ● ● - ● ● - ● ● ● ● F F ● - - L L L ● ● ● 42 48
37 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● F F ● - - L L L ● ● ● 42 48
45 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● F F ● - - L L L ● ● ● 42 48
200-150-315.1
7.5 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 42 48
11 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 42 48
15 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 42 48
18.5 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 42 48
22 CUE - C ● - ● ● - - - - ● - ● ● - ● ● ● ● - F ● - - L L L ● ● ● 42 48
NK
/NK
G b
are
sh
aft
pu
mp
s
NB, NBG, NK, NKG 4
4. NK/NKG bare shaft pumps
NK/NKG, centre-line outlet
Overview
TM
01
92
74
46
06
f xa
w S2
d5
DN
s
c
h
b
S1
l
t
n
n2
n3
n1
M
MDNt
m2
m1
2h
1
M Drain plug/priming plug
TypePump [mm] Supporting feet [mm] Shaft [mm] Weight [kg]
DNs DNt a f h1 h2 M b m1 m2 n1 n2 n3 w S1 S2 c d5 l x t n CI 1) SS 2)
NK 125-400 150 125 140 530 315 400 1/2" 100 200 150 500 400 110 370 M20 M12 38 42 110 140 45 12 250 243
NK 150-315.1 200 150 160 530 280 400 1/2" 100 200 150 550 450 110 370 M20 M12 33 42 110 140 45 12 252 255
NKG 150-125-400 150 125 140 530 315 400 1/2” 100 200 150 500 400 110 370 M20 M12 38 42 110 140 45 12 254 247
NKG 200-150-315.1 200 150 160 670 315 400 1/2” 100 200 150 550 450 140 500 M20 M16 22 48 110 180 51.5 14 326 330
1) CI: Cast iron version2) SS: Stainless steel version
X is the minimum pull-back length of the bearing bracket required for service of impeller and shaft seal.
2-pole 4-pole 6-pole
Pump type See page Pump type See page Pump type See page
NBG, NKG 200-150-315.1 20 NB, NK 125-400 22 NB, NK 125-400 30
NB, NK 150-315.1 24 NB, NK 150-315.1 32
NBG, NKG 150-125-400 26 NBG, NKG 150-125-400 34
NBG, NKG 200-150-315.1 28 NBG, NKG 200-150-315.1 36
19
Pe
rform
an
ce
cu
rve
s a
nd
tec
hn
ica
l da
ta
20
5NBG, NKG 200-150-315.1
2-pole
5. Performance curves and technical data
NBG, NKG 2-pole
TM
05
42
73
22
12
TM
03
80
10
01
07
TM
03
80
13
01
07
0 100 200 300 400 500 600 700 800 900 Q [m³/h]
40
60
80
100
120
140
160
180
200
H[m]
400
800
1200
1600
2000
p[kPa]
0
10
20
NPSH[m]
NBG/NKG 200-150-315.12-pole, 60 Hz
ISO 9906 Annex A
/279 (NPSH)/288 (NPSH)
/279
/28870 %
86.4 %
75 % 78 % 81 %84 %
84.8 %
0 100 200 300 400 500 600 700 800 900 Q [m³/h]
100
200
300
400
P2[kW]
0 50 100 150 200 250 Q [l/s]
/279/288
Pe
rfo
rma
nc
e c
urv
es
an
d t
ec
hn
ica
l d
ata
5NBG, NKG 200-150-315.1
2-pole
1) Data of pump with standard coupling / spacer coupling.2) Dimension of pump with IE2 range standard motor / dimension of pump with E-motor (built-in frequency converter).3) For information about NKG base frames, see section 6. Base frames.4) For information about NBG designs, see NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 38.
For number of support blocks needed, see NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 295.
Note: For NBG pumps with a motor frame size of 225 or above a base frame is available as an option. See NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 267.
Pump type 200-150-315.1/279 200-150-315.1/288
Motor typeStandard Motor Siemens 353 Siemens 398
E-Motor - -
Common data NBG/NKG
P2 [kW] 353 398
PN [bar] 16 16
DNs [mm] 200 200
DNd [mm] 150 150
a [mm] 160 160
h2 [mm] 400 400
Ss [mm] 12 x ∅22 12 x ∅23
Sd [mm] 8 x ∅22 8 x ∅23
NKG data
L NKG 1) [mm] 2206/2382 2449/2615
L NKGE 1) [mm] -/- -/-
l1 [mm] 2250 2250
l2 [mm] 150 150
l3 [mm] 2000 2000
b1 [mm] 740 740
b2 [mm] 1120 1120
b3 [mm] 1060 1060
d [mm] 28 28
a2 [mm] 110 110
h [mm] 140 140
h3 [mm] 460 500
h4 2) [mm] 928/- 1041/-
Base frame no. 3) 11C 11C
NBG data
Design 4) - -
L NBG [mm] - -
L NBG SS [mm] - -
h1 [mm] - -
G1 [mm] - -
G2 [mm] - -
m1 [mm] - -
m2 [mm] - -
n1 [mm] - -
n2 [mm] - -
b [mm] - -
s1 [mm] - -
H [mm] - -
LB 2) [mm] - -
AD 2) [mm] - -
AG 2) [mm] - -
LL 2) [mm] - -
P [mm] - -
C [mm] - -
B [mm] - -
A [mm] - -
K [mm] - -
Weight data
Weight NKG, CI 1) [kg] 2467/2467 2903/2898
Weight NKGE, CI 1) [kg] -/- -/-
Weight NBG, CI [kg] - -
Weight NBGE, CI [kg] - -
Weight diff. SS [kg] 3 3
21
Pe
rform
an
ce
cu
rve
s a
nd
tec
hn
ica
l da
ta
22
5NB, NK 125-400
4-pole
NB, NK 4-pole
TM
05
23
49
49
11T
M0
3 4
18
2 4
10
6T
M0
3 4
05
1 1
80
6
0 40 80 120 160 200 240 280 320 360 400 440 Q [m³/h]
20
30
40
50
60
70
80
90
100
110
120
130
H[m]
200
400
600
800
1000
1200
p[kPa]
0
2
4
6
8
NPSH[m]
NB/NK 125-4004-pole, 60 Hz
ISO 9906 Annex A
/333 (NPSH)
/438 (NPSH)/333
/369
/389
/414
/43865 % 68 % 71 %
74 %
74 %
76.9 %
78.0 %
76.4 %
74.7 %
72.8 % 70 %
68 %
0 40 80 120 160 200 240 280 320 360 400 440 Q [m³/h]
0
40
80
120
P2[kW]
0 20 40 60 80 100 120 Q [l/s]
/333/369
/389/414
/438
Pe
rfo
rma
nc
e c
urv
es
an
d t
ec
hn
ica
l d
ata
5NB, NK 125-400
4-pole
1) Data of pump with standard coupling / spacer coupling.2) Dimension of pump with IE2 range standard motor / dimension of pump with E-motor (built-in frequency converter).3) For information about NK base frames, see section 6. Base frames.4) For information about NB designs, see NB, NBE, NK, NKE data booklet prod. no 96695638, page 33.
For number of support blocks needed, see NB, NBE, NK, NKE data booklet prod. no 96695638, page 284.
Note: For NB pumps with a motor frame size of 225 or above a base frame is available as an option. See NB, NBE, NK, NKE data booklet prod. no 96695638, page 257.
Pump type 125-400/333 125-400/369 125-400/389 125-400/414 125-400/438
Motor typeStandard Motor Siemens 250M Siemens 280S Siemens 280M Siemens 315.1S Siemens 315.1MA
E-Motor - - - - -
CommondataNB/NK
P2 [kW] 55 75 90 110 132
PN [bar] 16 16 16 16 16
DNs [mm] 150 150 150 150 150
DNd [mm] 125 125 125 125 125
a [mm] 140 140 140 140 140
h2 [mm] 400 400 400 400 400
Ss [mm] 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23
Sd [mm] 8 x ∅19 8 x ∅19 8 x ∅19 8 x ∅19 8 x ∅19
NK data
L NK 1) [mm] 1631/1767 1634/1770 1744/1880 1776/1912 1936/2072
L NKE 1) [mm] -/- -/- -/- -/- -/-
l1 [mm] 1800 2000 2000 2000 2000
l2 [mm] 300 330 330 330 330
l3 [mm] 1200 1340 1340 1340 1340
b1 [mm] 600 750 750 750 750
b2 [mm] 730 890 890 890 890
b3 [mm] 670 830 830 830 830
d [mm] 28 28 28 28 28
a2 [mm] 110 110 110 110 110
h [mm] 100 130 130 130 130
h3 [mm] 415 445 445 450 450
h4 2) [mm] 807/- 877/- 877/- 945/- 945/-
Base frame no. 3) 9 10 10 10 10
NB data
Design 4) C C C C C
L NB [mm] 441 441 441 471 471
L NB SS [mm] 441 441 441 471 471
h1 [mm] 315.1 315.1 315.1 315.1 315.1
G1 [mm] 284 284 284 284 284
G2 [mm] 320 320 320 320 320
m1 [mm] 200 200 200 200 200
m2 [mm] 150 150 150 150 150
n1 [mm] 500 500 500 500 500
n2 [mm] 400 400 400 400 400
b [mm] 100 100 100 100 100
s1 [mm] M20 M20 M20 M20 M20
H [mm] 250 280 280 315.1 315.1
LB 2) [mm] 817/- 820/- 930/- 932/- 1092/-
AD 2) [mm] 392/- 432/- 432/- 495/- 495/-
AG 2) [mm] 300/- 300/- 300/- 379/- 379/-
LL 2) [mm] 236/- 236/- 236/- 307/- 307/-
P [mm] 550 550 550 660 660
C [mm] 168 190 190 216 216
B [mm] 349 368 419 406 457
A [mm] 406 457 457 508 508
K [mm] 24 24 24 28 28
Weight data
Weight NK. CI 1) [kg] 968/967 1200/1194 1304/1298 1412/1414 1567/1570
Weight NKE. CI 1) [kg] -/- -/- -/- -/- -/-
Weight NB. CI [kg] 715 830 930 1107 1262
Weight NBE. CI [kg] - - - - -
Weight diff. SS [kg] -7 -7 -7 -7 -7
23
Pe
rform
an
ce
cu
rve
s a
nd
tec
hn
ica
l da
ta
24
5NB, NK 150-315.1
4-pole
TM
05
42
74
22
12
TM
03
41
82
41
06
TM
03
40
51
18
06
0 50 100 150 200 250 300 350 400 450 500 550 600 Q [m³/h]
0
10
20
30
40
50
60
70
H[m]
0
200
400
600
p[kPa]
0
10
20
NPSH[m]
NB/NK 150-315.14-pole, 60 Hz
ISO 9906 Annex A
/251 (NPSH)
/333 (NPSH)
/251
/265
/278
/301
/333 74 % 77 % 80 % 83 %86 %
81.4 %
83.7 %
83.7 %
86.1 %
87.9%
80 %83 %
86 %
77 %
0 50 100 150 200 250 300 350 400 450 500 550 600 Q [m³/h]
0
20
40
60
80
P2[kW]
0 20 40 60 80 100 120 140 160 Q [l/s]
/251/265
/278/301
/333
Pe
rfo
rma
nc
e c
urv
es
an
d t
ec
hn
ica
l d
ata
5NB, NK 150-315.1
4-pole
1) Data of pump with standard coupling / spacer coupling.2) Dimension of pump with IE2 range standard motor / dimension of pump with E-motor (built-in frequency converter).3) For information about NK base frames, see section 6. Base frames.4) For information about NB designs, see NB, NBE, NK, NKE data booklet prod. no 96695638, page 33.
For number of support blocks needed, see NB, NBE, NK, NKE data booklet prod. no 96695638, page 284.
Note: For NB pumps with a motor frame size of 225 or above a base frame is available as an option. See NB, NBE, NK, NKE data booklet prod. no 96695638, page 257.
Pump type 150-315.1/251 150-315.1/265 150-315.1/287 150-315.1/301 150-315.1/333
Motor typeStandard Motor Siemens 200L Siemens 225S Siemens 225M Siemens 250M Siemens 280S
E-Motor - - - - -
CommondataNB/NK
P2 [kW] 30 37 45 55 75
PN [bar] 10 10 10 10 10
DNs [mm] 200 200 200 200 200
DNd [mm] 150 150 150 150 150
a [mm] 160 160 160 160 160
h2 [mm] 400 400 400 400 400
Ss [mm] 8 x ∅21 8 x ∅21 8 x ∅22 8 x ∅23 8 x ∅24
Sd [mm] 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23
NK data
L NK 1) [mm] 1463/1599 1483/1619 1653/1679 1651/1787 1654/1790
L NKE 1) [mm] -/- -/- -/- -/- -/-
l1 [mm] 1800 1800 1800 1800 2000
l2 [mm] 300 300 300 300 330
l3 [mm] 1200 1200 1200 1200 1340
b1 [mm] 600 600 600 600 750
b2 [mm] 730 730 730 730 890
b3 [mm] 670 670 670 670 830
d [mm] 28 28 28 28 28
a2 [mm] 110 110 110 110 110
h [mm] 100 100 100 100 130
h3 [mm] 380 380 380 380 415
h4 2) [mm] 685/- 705/- 705/- 772/- 847/-
Base frame no. 3) 9 9 9 9 10
NB data
Design 4) C C C C C
L NB [mm] 431 461 461 461 461
L NB SS [mm] 431 461 461 461 461
h1 [mm] 280 280 280 280 280
G1 [mm] 264 264 264 264 264
G2 [mm] 334 334 334 334 334
m1 [mm] 200 200 200 200 200
m2 [mm] 150 150 150 150 150
n1 [mm] 550 550 550 550 550
n2 [mm] 450 450 450 450 450
b [mm] 100 100 100 100 100
s1 [mm] M20 M20 M20 M20 M20
H [mm] 200 225 225 250 280
LB 2) [mm] 659 649 709 817/- 820/-
AD 2) [mm] 305 325 325 392/- 432/-
AG 2) [mm] 260 260 260 300/- 300/-
LL 2) [mm] 192 192 192 236/- 236/-
P [mm] 400 450 450 550 550
C [mm] 133 149 149 168 190
B [mm] 305 286 311 349 368
A [mm] 318 356 356 406 457
K [mm] 19 19 19 24 24
Weight data
Weight NK. CI 1) [kg] 628/634 747/742 787/782 909/908 1159/1153
Weight NKE. CI 1) [kg] -/- -/- -/- -/- -/-
Weight NB. CI [kg] 425 522 562 702 817
Weight NBE. CI [kg] - - - - -
Weight diff. SS [kg] 3 3 3 3 3
25
Pe
rform
an
ce
cu
rve
s a
nd
tec
hn
ica
l da
ta
26
5NBG, NKG 150-125-400
4-pole
NBG, NKG 4-pole
TM
05
23
45
49
11T
M0
3 8
01
0 0
10
7T
M0
3 8
01
3 0
10
7
0 40 80 120 160 200 240 280 320 360 400 440 Q [m³/h]
20
30
40
50
60
70
80
90
100
110
120
130
H[m]
200
400
600
800
1000
1200
p[kPa]
0
2
4
6
8
NPSH[m]
NBG/NKG 150-125-4004-pole, 60 Hz
ISO 9906 Annex A
/333 (NPSH)
/438 (NPSH)/333
/369
/389
/414
/43865 % 68 % 71 %
74 %
74 %
76.9 %
78.0 %
76.4 %
74.7 %
72.8 % 70 %
68 %
0 40 80 120 160 200 240 280 320 360 400 440 Q [m³/h]
0
40
80
120
P2[kW]
0 20 40 60 80 100 120 Q [l/s]
/333/369
/389/414
/438
Pe
rfo
rma
nc
e c
urv
es
an
d t
ec
hn
ica
l d
ata
5NBG, NKG 150-125-400
4-pole
1) Data of pump with standard coupling / spacer coupling.2) Dimension of pump with IE2 range standard motor / dimension of pump with E-motor (built-in frequency converter).3) For information about NKG base frames, see section 6. Base frames.4) For information about NBG designs, see NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 38.
For number of support blocks needed, see NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 295.
Note: For NBG pumps with a motor frame size of 225 or above a base frame is available as an option. See NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 267.
Pump type 150-125-400/333 150-125-400/369 150-125-400/389 150-125-400/414 150-125-400/438
Motor typeStandard Motor Siemens 250M Siemens 280S Siemens 280M Siemens 315.1S Siemens 315.1MA
E-Motor - - - - -
Commondata NBG/NKG
P2 [kW] 55 75 90 110 132
PN [bar] 16 16 16 16 16
DNs [mm] 150 150 150 150 150
DNd [mm] 125 125 125 125 125
a [mm] 140 140 140 140 140
h2 [mm] 400 400 400 400 400
Ss [mm] 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23
Sd [mm] 8 x ∅19 8 x ∅19 8 x ∅19 8 x ∅19 8 x ∅19
NKG data
L NKG 1) [mm] 1631/1767 1634/1770 1744/1880 1776/1912 1936/2072
L NKGE 1) [mm] -/- -/- -/- -/- -/-
l1 [mm] 1800 2000 2000 2000 2000
l2 [mm] 300 330 330 330 330
l3 [mm] 1200 1340 1340 1340 1340
b1 [mm] 600 750 750 750 750
b2 [mm] 730 890 890 890 890
b3 [mm] 670 830 830 830 830
d [mm] 28 28 28 28 28
a2 [mm] 110 110 110 110 110
h [mm] 100 130 130 130 130
h3 [mm] 415 445 445 450 450
h4 2) [mm] 807/- 877/- 877/- 945/- 945/-
Base frame no. 3) 9 10 10 10 10
NBG data
Design 4) C C C C C
L NBG [mm] 441 441 441 471 471
L NBG SS [mm] 441 441 441 471 471
h1 [mm] 315.1 315.1 315.1 315.1 315.1
G1 [mm] 284 284 284 284 284
G2 [mm] 320 320 320 320 320
m1 [mm] 200 200 200 200 200
m2 [mm] 150 150 150 150 150
n1 [mm] 500 500 500 500 500
n2 [mm] 400 400 400 400 400
b [mm] 100 100 100 100 100
s1 [mm] M20 M20 M20 M20 M20
H [mm] 250 280 280 315.1 315.1
LB 2) [mm] 817/- 820/- 930/- 932/- 1092/-
AD 2) [mm] 392/- 432/- 432/- 495/- 495/-
AG 2) [mm] 300/- 300/- 300/- 379/- 379/-
LL 2) [mm] 236/- 236/- 236/- 307/- 307/-
P [mm] 550 550 550 660 660
C [mm] 168 190 190 216 216
B [mm] 349 368 419 406 457
A [mm] 406 457 457 508 508
K [mm] 24 24 24 28 28
Weight data
Weight NKG, CI 1) [kg] 970/969 1202/1196 1306/1300 1414/1416 1570/1572
Weight NKGE, CI 1) [kg] -/- -/- -/- -/- -/-
Weight NBG, CI [kg] 716 831 931 1108 1263
Weight NBGE, CI [kg] - - - - -
Weight diff. SS [kg] -7 -7 -7 -7 -7
27
Pe
rform
an
ce
cu
rve
s a
nd
tec
hn
ica
l da
ta
28
5NBG, NKG 200-150-315.1
4-pole
TM
05
42
75
22
12
TM
03
80
10
01
07
TM
03
80
13
01
07
0 50 100 150 200 250 300 350 400 450 500 550 600 Q [m³/h]
0
10
20
30
40
50
60
70
H[m]
0
200
400
600
p[kPa]
0
10
20
NPSH[m]
NBG/NKG 200-150-315.14-pole, 60 Hz
ISO 9906 Annex A
/251 (NPSH)
/333 (NPSH)
/251
/265
/278
/301
/333 74 % 77 % 80 % 83 %86 %
81.4 %
83.7 %
83.7 %
86.1 %
87.9%
80 %83 %
86 %
77 %
0 50 100 150 200 250 300 350 400 450 500 550 600 Q [m³/h]
0
20
40
60
80
P2[kW]
0 20 40 60 80 100 120 140 160 Q [l/s]
/251/265
/278/301
/333
Pe
rfo
rma
nc
e c
urv
es
an
d t
ec
hn
ica
l d
ata
5NBG, NKG 200-150-315.1
4-pole
1) Data of pump with standard coupling / spacer coupling.2) Dimension of pump with IE2 range standard motor / dimension of pump with E-motor (built-in frequency converter).3) For information about NKG base frames, see section 6. Base frames.4) For information about NBG designs, see NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 38.
For number of support blocks needed, see NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 295.
Note: For NBG pumps with a motor frame size of 225 or above a base frame is available as an option. See NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 267.
Pump type 200-150-315.1/251 200-150-315.14/265 200-150-315.1/278 200-150-315.1/301 200-150-315.1/333
Motor typeStandard Motor Siemens 200L Siemens 225S Siemens 225M Siemens 250M Siemens 280S
E-Motor - - - - -
Commondata NBG/NKG
P2 [kW] 30 37 45 55 75
PN [bar] 16 16 16 16 16
DNs [mm] 200 200 200 200 200
DNd [mm] 150 150 150 150 150
a [mm] 160 160 160 160 160
h2 [mm] 400 400 400 400 400
Ss [mm] 12 x ∅23 12 x ∅23 12 x ∅23 12 x ∅23 12 x ∅23
Sd [mm] 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23
NKG data
L NKG 1) [mm] 1603/1779 1621/1797 1683/1859 1791/1967 1794/1970
L NKGE 1) [mm] -/- -/- -/- -/- -/-
l1 [mm] 1800 1800 1800 1800 2000
l2 [mm] 300 300 300 300 330
l3 [mm] 1200 1200 1200 1200 1340
b1 [mm] 600 600 600 600 750
b2 [mm] 730 730 730 730 890
b3 [mm] 670 670 670 670 830
d [mm] 28 28 28 28 28
a2 [mm] 110 110 110 110 110
h [mm] 100 100 100 100 130
h3 [mm] 415 415 415 415 445
h4 2) [mm] 720/- 740/- 740/- 807/- 877/-
Base frame no. 3) 9 9 9 9 10
NBG data
Design 4) C C C C C
L NBG [mm] 444 474 474 474 474
L NBG SS [mm] 444 474 474 474 474
h1 [mm] 315 315 315 315 315
G1 [mm] 264 264 264 264 264
G2 [mm] 331 331 331 331 331
m1 [mm] 200 200 200 200 200
m2 [mm] 150 150 150 150 150
n1 [mm] 550 550 550 550 550
n2 [mm] 450 450 450 450 450
b [mm] 100 100 100 100 100
s1 [mm] M20 M20 M20 M20 M20
H [mm] 200 225 225 250 280
LB 2) [mm] 659 649 709 817/- 820/-
AD 2) [mm] 305 325 325 392/- 432/-
AG 2) [mm] 260 260 260 300/- 300/-
LL 2) [mm] 192 192 192 236/- 236/-
P [mm] 400 450 450 550 550
C [mm] 133 149 149 168 190
B [mm] 305 286 311 349 368
A [mm] 318 356 356 406 457
K [mm] 19 19 19 24 24
Weight data
Weight NKG, CI 1) [kg] 728/729 816/813 856/853 1033/1033 1265/1260
Weight NKGE, CI 1) [kg] -/- -/- -/- -/- -/-
Weight NBG, CI [kg] 435 533 573 720 835
Weight NBGE, CI [kg] - - - - -
Weight diff. SS [kg] 3 3 3 3 3
29
Pe
rform
an
ce
cu
rve
s a
nd
tec
hn
ica
l da
ta
30
5NB, NK 125-400
6-pole
NB, NK 6-pole
TM
05
23
50
49
11T
M0
3 4
18
2 4
10
6T
M0
3 4
17
9 1
80
6
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300Q [m³/h]
5
10
15
20
25
30
35
40
45
50
55
H[m]
100
200
300
400
500
p[kPa]
0
2
4
6
NPSH[m]
NB/NK 125-4006-pole, 60 Hz
ISO 9906 Annex A
/346 (NPSH)
/438 (NPSH)
/346
/367
/404
/432
/438 65 % 68 % 71 %74 %
74 %71 %
76.1 %
76.4 %75.1 %
73.7 %
71.7 %
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300Q [m³/h]
0
10
20
30
40
P2[kW]
0 10 20 30 40 50 60 70 80 Q [l/s]
/346/367
/404/432/438
Pe
rfo
rma
nc
e c
urv
es
an
d t
ec
hn
ica
l d
ata
5NB, NK 125-400
6-pole
1) Data of pump with standard coupling / spacer coupling.2) Dimension of pump with IE2 range standard motor / dimension of pump with E-motor (built-in frequency converter).3) For information about NK base frames, see section 6. Base frames.4) For information about NB designs, see NB, NBE, NK, NKE data booklet prod. no 96695638, page 33.
For number of support blocks needed, see NB, NBE, NK, NKE data booklet prod. no 96695638, page 284.
Note: For NB pumps with a motor frame size of 225 or above a base frame is available as an option. See NB, NBE, NK, NKE data booklet prod. no 96695638, page 257.
Pump type 125-400/346 125-400/367 125-400/404 125-400/432 125-400/438
Motor typeStandard Motor Siemens 200LA Siemens 200LB Siemens 225M Siemens 250M Siemens 280S
E-Motor - - - - -
CommondataNB/NK
P2 [kW] 18.5 22 30 37 45
PN [bar] 16 16 16 16 16
DNs [mm] 150 150 150 150 150
DNd [mm] 125 125 125 125 125
a [mm] 140 140 140 140 140
h2 [mm] 400 400 400 400 400
Ss [mm] 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23
Sd [mm] 8 x ∅19 8 x ∅19 8 x ∅19 8 x ∅19 8 x ∅19
NK data
L NK 1) [mm] 1443/1579 1443/1579 1523/1659 1561/1697 1634/1770
L NKE 1) [mm] -/- -/- -/- -/- -/-
l1 [mm] 1800 1800 1800 1800 2000
l2 [mm] 300 300 300 300 330
l3 [mm] 1200 1200 1200 1200 1340
b1 [mm] 600 600 600 600 750
b2 [mm] 730 730 730 730 890
b3 [mm] 670 670 670 670 830
d [mm] 28 28 28 28 28
a2 [mm] 110 110 110 110 110
h [mm] 100 100 100 100 130
h3 [mm] 415 415 415 415 445
h4 2) [mm] 720/- 720/- 740/- 807/- 877/-
Base frame no. 3) 9 9 9 9 10
NB data
Design 4) C C C C C
L NB [mm] 411 411 441 441 441
L NB SS [mm] 411 411 441 441 441
h1 [mm] 315.1 315.1 315.1 315.1 315.1
G1 [mm] 284 284 284 284 284
G2 [mm] 320 320 320 320 320
m1 [mm] 200 200 200 200 200
m2 [mm] 150 150 150 150 150
n1 [mm] 500 500 500 500 500
n2 [mm] 400 400 400 400 400
b [mm] 100 100 100 100 100
s1 [mm] M20 M20 M20 M20 M20
H [mm] 200 200 225 250 280
LB 2) [mm] 659/- 659/- 709/- 747/- 820/-
AD 2) [mm] 305/- 305/- 325/- 392/- 432/-
AG 2) [mm] 260/- 260/- 260/- 300/- 300/-
LL 2) [mm] 192/- 192/- 192/- 236/- 236/-
P [mm] 400 400 450 550 550
C [mm] 133 133 149 168 190
B [mm] 305 305 311 349 368
A [mm] 318 318 356 406 457
K [mm] 19 19 19 24 24
Weight data
Weight NK. CI 1) [kg] 633/628 664/659 782/778 914/913 1146/1140
Weight NKE. CI 1) [kg] -/- -/- -/- -/- -/-
Weight NB. CI [kg] 418 449 568 661 776
Weight NBE. CI [kg] - - - - -
Weight diff. SS [kg] -7 -7 -7 -7 -7
31
Pe
rform
an
ce
cu
rve
s a
nd
tec
hn
ica
l da
ta
32
5NB, NK 150-315.1
6-pole
TM
05
42
76
22
12
TM
03
41
82
41
06
TM
03
41
79
18
06
0 40 80 120 160 200 240 280 320 360 400 440 Q [m³/h]
0
4
8
12
16
20
24
28
H[m]
0
80
160
240
p[kPa]
0
10
20
NPSH[m]
NB/NK 150-315.16-pole, 60 Hz
ISO 9906 Annex A
/239 (NPSH)
/341 (NPSH)
/239
/271
/296
/315
/341 70 % 74 % 78 %82 %
86 %
86 %
78 %
87.3 %
85.0 %
82.4 %
76.5 %
86.3 %
74 %70 %
82 %
0 40 80 120 160 200 240 280 320 360 400 440 Q [m³/h]
0
5
10
15
20
P2[kW]
0 20 40 60 80 100 120 Q [l/s]
/239/271
/296/315
/341
Pe
rfo
rma
nc
e c
urv
es
an
d t
ec
hn
ica
l d
ata
5NB, NK 150-315.1
6-pole
1) Data of pump with standard coupling / spacer coupling.2) Dimension of pump with IE2 range standard motor / dimension of pump with E-motor (built-in frequency converter).3) For information about NK base frames, see section 6. Base frames.4) For information about NB designs, see NB, NBE, NK, NKE data booklet prod. no 96695638, page 33.
For number of support blocks needed, see NB, NBE, NK, NKE data booklet prod. no 96695638, page 284.
Note: For NB pumps with a motor frame size of 225 or above a base frame is available as an option. See NB, NBE, NK, NKE data booklet prod. no 96695638, page 257.
Pump type 150-315.1/239 150-315.1/271 150-315.1/296 150-315.1/315 150-315.1/341
Motor typeStandard Motor Siemens 160M Siemens 160L Siemens 180L Siemens 200LA Siemens 200LB
E-Motor - - - - -
CommondataNB/NK
P2 [kW] 7.5 11 15 18.5 22
PN [bar] 10 10 10 10 10
DNs [mm] 200 200 200 200 200
DNd [mm] 150 150 150 150 150
a [mm] 160 160 160 160 160
h2 [mm] 400 400 400 400 400
Ss [mm] 8 x ∅23 8 x ∅24 8 x ∅25 8 x ∅26 8 x ∅27
Sd [mm] 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23
NK data
L NK 1) [mm] 1463/1599 1322/1458 1406/1542 1463/1599 1463/1599
L NKE 1) [mm] -/- -/- -/- -/- -/-
l1 [mm] 1800 1800 1800 1800 1800
l2 [mm] 300 300 300 300 300
l3 [mm] 1200 1200 1200 1200 1200
b1 [mm] 600 600 600 600 600
b2 [mm] 730 730 730 730 730
b3 [mm] 670 670 670 670 670
d [mm] 28 28 28 28 28
a2 [mm] 110 110 110 110 110
h [mm] 100 100 100 100 100
h3 [mm] 380 380 380 380 380
h4 2) [mm] 577/- 577/- 641/- 685/- 685/-
Base frame no. 3) 9 9 9 9 9
NB data
Design 4) C C C C C
L NB [mm] 431 431 431 431 431
L NB SS [mm] 431 431 431 431 431
h1 [mm] 280 280 280 280 280
G1 [mm] 264 264 264 264 264
G2 [mm] 334 334 334 334 334
m1 [mm] 200 200 200 200 200
m2 [mm] 150 150 150 150 150
n1 [mm] 550 550 550 550 550
n2 [mm] 450 450 450 450 450
b [mm] 100 100 100 100 100
s1 [mm] M20 M20 M20 M20 M20
H [mm] 160 160 180 200 200
LB 2) [mm] 478 518 602 659/- 659/-
AD 2) [mm] 197 197 258 305/- 305/-
AG 2) [mm] 165 165 152 260/- 260/-
LL 2) [mm] 165 165 132 192/- 192/-
P [mm] 350 350 350 400 400
C [mm] - 108 121 133 133
B [mm] - 254 279 305 305
A [mm] - 254 279 318 318
K [mm] - 15 15 19 19
Weight data
Weight NK. CI 1) [kg] 511/515 531/526 676/569 614/609 645/640
Weight NKE. CI 1) [kg] -/- -/- -/- -/- -/-
Weight NB. CI [kg] 307 321 359 405/- 436/-
Weight NBE. CI [kg] - - - - -
Weight diff. SS [kg] 4 3 3 3 3
33
Pe
rform
an
ce
cu
rve
s a
nd
tec
hn
ica
l da
ta
34
5NBG, NKG 150-125-400
6-pole
NBG, NKG 6-pole
TM
5 2
34
6 4
911
TM
03
80
10
01
07
TM
03
80
12
01
07
Information about bare-shaft pump dimensions, see page 19.
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300Q [m³/h]
5
10
15
20
25
30
35
40
45
50
55
H[m]
100
200
300
400
500
p[kPa]
0
2
4
6
NPSH[m]
NBG/NKG 150-125-4006-pole, 60 Hz
ISO 9906 Annex A
/346 (NPSH)
/438 (NPSH)
/346
/367
/404
/432
/438 65 % 68 % 71 %74 %
74 %71 %
76.1 %
76.4 %75.1 %
73.7 %
71.7 %
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300Q [m³/h]
0
10
20
30
40
P2[kW]
0 10 20 30 40 50 60 70 80 Q [l/s]
/346/367
/404/432/438
Pe
rfo
rma
nc
e c
urv
es
an
d t
ec
hn
ica
l d
ata
5NBG, NKG 150-125-400
6-pole
1) Data of pump with standard coupling / spacer coupling.2) Dimension of pump with IE2 range standard motor / dimension of pump with E-motor (built-in frequency converter).3) For information about NKG base frames, see section 6. Base frames.4) For information about NBG designs, see NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 38.
For number of support blocks needed, see NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 295.
Note: For NBG pumps with a motor frame size of 225 or above a base frame is available as an option. See NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 267.
Pump type 150-125-400/346 150-125-400/367 150-125-400/404 150-125-400/432 150-125-400/438
Motor typeStandard Motor Siemens 200LA Siemens 200LB Siemens 225M Siemens 250M Siemens 280S
E-Motor - - - - -
Commondata NBG/NKG
P2 [kW] 18.5 22 30 37 45
PN [bar] 16 16 16 16 16
DNs [mm] 150 150 150 150 150
DNd [mm] 125 125 125 125 125
a [mm] 140 140 140 140 140
h2 [mm] 400 400 400 400 400
Ss [mm] 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23
Sd [mm] 8 x ∅19 8 x ∅19 8 x ∅19 8 x ∅19 8 x ∅19
NKG data
L NKG 1) [mm] 1443/1579 1443/1579 1523/1659 1561/1697 1634/1770
L NKGE 1) [mm] -/- -/- -/- -/- -/-
l1 [mm] 1800 1800 1800 1800 2000
l2 [mm] 300 300 300 300 330
l3 [mm] 1200 1200 1200 1200 1340
b1 [mm] 600 600 600 600 750
b2 [mm] 730 730 730 730 890
b3 [mm] 670 670 670 670 830
d [mm] 28 28 28 28 28
a2 [mm] 110 110 110 110 110
h [mm] 100 100 100 100 130
h3 [mm] 415 415 415 415 445
h4 2) [mm] 720/- 720/- 740/- 807/- 877/-
Base frame no. 3) 9 9 9 9 10
NBG data
Design 4) C C C C C
L NBG [mm] 411 411 441 441 441
L NBG SS [mm] 411 411 441 441 441
h1 [mm] 315.1 315.1 315.1 315.1 315.1
G1 [mm] 284 284 284 284 284
G2 [mm] 320 320 320 320 320
m1 [mm] 200 200 200 200 200
m2 [mm] 150 150 150 150 150
n1 [mm] 500 500 500 500 500
n2 [mm] 400 400 400 400 400
b [mm] 100 100 100 100 100
s1 [mm] M20 M20 M20 M20 M20
H [mm] 200 200 225 250 280
LB 2) [mm] 659/- 659/- 709/- 747/- 820/-
AD 2) [mm] 305/- 305/- 325/- 392/- 432/-
AG 2) [mm] 260/- 260/- 260/- 300/- 300/-
LL 2) [mm] 192/- 192/- 192/- 236/- 236/-
P [mm] 400 400 450 550 550
C [mm] 133 133 149 168 190
B [mm] 305 305 311 349 368
A [mm] 318 318 356 406 457
K [mm] 19 19 19 24 24
Weight data
Weight NKG, CI 1) [kg] 636/630 667/661 785/780 916/915 1148/1142
Weight NKGE, CI 1) [kg] -/- -/- -/- -/- -/-
Weight NBG, CI [kg] 418 449 568 662 777
Weight NBGE, CI [kg] - - - - -
Weight diff. SS [kg] -7 -7 -7 -7 -7
35
Pe
rform
an
ce
cu
rve
s a
nd
tec
hn
ica
l da
ta
36
5NBG, NKG 200-150-315.1
6-pole
TM
05
42
77
22
12
TM
03
80
10
01
07
TM
03
80
12
01
07
Information about bare-shaft pump dimensions, see page 19.
0 40 80 120 160 200 240 280 320 360 400 440 Q [m³/h]
0
4
8
12
16
20
24
28
H[m]
0
80
160
240
p[kPa]
0
10
20
NPSH[m]
NBG/NKG 200-150-315.16-pole, 60 Hz
ISO 9906 Annex A
/239 (NPSH)
/341 (NPSH)
/239
/271
/296
/315
/341 70 % 74 % 78 %82 %
86 %
86 %
78 %
87.3 %
85.0 %
82.4 %
76.5 %
86.3 %
74 %70 %
82 %
0 40 80 120 160 200 240 280 320 360 400 440 Q [m³/h]
0
5
10
15
20
P2[kW]
0 20 40 60 80 100 120 Q [l/s]
/239/271
/296/315
/341
Pe
rfo
rma
nc
e c
urv
es
an
d t
ec
hn
ica
l d
ata
5NBG, NKG 200-150-315.1
6-pole
1) Data of pump with standard coupling / spacer coupling.2) Dimension of pump with IE2 range standard motor / dimension of pump with E-motor (built-in frequency converter).3) For information about NKG base frames, see section 6. Base frames.4) For information about NBG designs, see NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 38.
For number of support blocks needed, see NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 295.
Note: For NBG pumps with a motor frame size of 225 or above a base frame is available as an option. See NBG, NBGE, NKG, NKGE data booklet prod. no 96695640, page 267.
Pump type 200-150-315.1/239 200-150-315.1/271 200-150-315.1/296 200-150-315.1/315 200-150-315.1/341
Motor typeStandard Motor Siemens 160M Siemens 160L Siemens 180L Siemens 200LA Siemens 200LB
E-Motor - - - - -
Commondata NBG/NKG
P2 [kW] 7.5 11 15 18.5 22
PN [bar] 16 16 16 16 16
DNs [mm] 200 200 200 200 200
DNd [mm] 150 150 150 150 150
a [mm] 160 160 160 160 160
h2 [mm] 400 400 400 400 400
Ss [mm] 12 x ∅23 12 x ∅23 12 x ∅23 12 x ∅23 12 x ∅23
Sd [mm] 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23 8 x ∅23
NKG data
L NKG 1) [mm] 1422/1598 1462/1638 1546/1722 1603/1779 1603/1779
L NKGE 1) [mm] -/- -/- -/- -/- -/-
l1 [mm] 1800 1800 1800 1800 1800
l2 [mm] 300 300 300 300 300
l3 [mm] 1200 1200 1200 1200 1200
b1 [mm] 600 600 600 600 600
b2 [mm] 730 730 730 730 730
b3 [mm] 670 670 670 670 670
d [mm] 28 28 28 28 28
a2 [mm] 110 110 110 110 110
h [mm] 100 100 100 100 100
h3 [mm] 415 415 415 415 415
h4 2) [mm] 612/- 612/- 673/- 720/- 720/-
Base frame no. 3) 9 9 9 9 9
NBG data
Design 4) C C C C C
L NBG [mm] 444 444 444 444 444
L NBG SS [mm] 444 444 444 444 444
h1 [mm] 315 315 315 315 315
G1 [mm] 264 264 264 264 264
G2 [mm] 331 331 331 331 331
m1 [mm] 200 200 200 200 200
m2 [mm] 150 150 150 150 150
n1 [mm] 550 550 550 550 550
n2 [mm] 450 450 450 450 450
b [mm] 100 100 100 100 100
s1 [mm] M20 M20 M20 M20 M20
H [mm] 160 160 180 200 200
LB 2) [mm] 478 518 602 659/- 659/-
AD 2) [mm] 197 197 258 305/- 305/-
AG 2) [mm] 165 165 152 260/- 260/-
LL 2) [mm] 165 165 132 192/- 192/-
P [mm] 350 350 350 400 400
C [mm] 108 108 121 133 133
B [mm] 210 254 279 305 305
A [mm] 254 254 279 318 318
K [mm] 15 15 15 19 19
Weight data
Weight NKG, CI 1) [kg] 618/619 613/611 657/650 698/694 729/725
Weight NKGE, CI 1) [kg] -/- -/- -/- -/- -/-
Weight NBG, CI [kg] 320 333 372 415/- 446/-
Weight NBGE, CI [kg] - - - - -
Weight diff. SS [kg] 4 3 3 3 3
37
Ba
se
fram
es
38
NB, NBG, NK, NKG6
6. Base frames
Dimensional sketches for NK, NKE, NKG, NKGE base framesThe sketches below show the base frame dimensions for NK, NKE, NKG, NKGE pumps.
The base frame number is stated for each NK, NKE, NKG, NKGE pump mentioned in section 5. Performance curves and technical data.
Base frame number
Dimensions
2T
M0
3 7
71
4 4
80
6
3
TM
03
77
15
48
06
4
TM
03
77
16
48
06
5
TM
03
77
17
48
06
6
TM
03
77
18
48
06
7
TM
03
77
19
48
06
8
TM
03
77
20
48
06
9
TM
03
77
21
48
06
10
TM
03
77
22
08
07
10D
TM
04
41
66
51
09
10E
TM
04
41
67
51
09
Base frame number
Dimensions
Ba
se
fra
me
s
NB, NBG, NK, NKG 6
NB base framesSome NB pumps are available with base frames as an option. These must be configured as part of the pump.
10F
TM
04
43
62
27
09
10GT
M0
4 4
36
3 2
70
9
10H
TM
04
511
2 2
70
9
11
TM
03
77
23
08
07
11 (grout)
TM
04
20
69
19
08
12A
TM
04
611
4 5
00
9
Base frame number
Dimensions
39
Fu
rthe
r pro
du
ct d
oc
um
en
tatio
n
40
NB, NBG, NK, NKG7
7. Further product documentation
WebCAPSWebCAPS is a Web-based Computer Aided Product Selection program available on www.grundfos.com.
WebCAPS contains detailed information on more than 220,000 Grundfos products in more than 30 languages.
Information in WebCAPS is divided into six sections:
• Catalogue
• Literature
• Service
• Sizing
• Replacement
• CAD drawings.
Catalogue
Based on fields of application and pump types, this section contains the following:• technical data• curves (QH, Eta, P1, P2, etc.) which can be adapted to the
density and viscosity of the pumped liquid and show the number of pumps in operation
• product photos• dimensional drawings• wiring diagrams• quotation texts, etc.
Literature
This section contains all the latest documents of a given pump, such as• data booklets• installation and operating instructions• service documentation, such as Service kit catalogue and
Service kit instructions• quick guides• product brochures.
Service
This section contains an easy-to-use interactive service catalogue. Here you can find and identify service parts of both existing and discontinued Grundfos pumps.Furthermore, the section contains service videos showing you how to replace service parts.
Fu
rth
er
pro
du
ct
do
cu
me
nta
tio
n
NB, NBG, NK, NKG 7
WinCAPS
Fig. 1 WinCAPS DVD
WinCAPS is a Windows-based Computer Aided Product Selection program containing detailed information on more than 220,000 Grundfos products in more than 30 languages.
The program contains the same features and functions as WebCAPS, but is an ideal solution if no internet connection is available.
WinCAPS is available on DVD and updated once a year.
Sizing
This section is based on different fields of application and installation examples and gives easy step-by-step instructions in how to size a product:• Select the most suitable and efficient pump for your
installation.• Carry out advanced calculations based on energy,
consumption, payback periods, load profiles, life cycle costs, etc.
• Analyse your selected pump via the built-in life cycle cost tool.• Determine the flow velocity in wastewater applications, etc.
Replacement
In this section you find a guide to selecting and comparing replacement data of an installed pump in order to replace the pump with a more efficient Grundfos pump. The section contains replacement data of a wide range of pumps produced by other manufacturers than Grundfos.
Based on an easy step-by-step guide, you can compare Grundfos pumps with the one you have installed on your site. When you have specified the installed pump, the guide will suggest a number of Grundfos pumps which can improve both comfort and efficiency.
CAD drawings
In this section, it is possible to download 2-dimensional (2D) and 3-dimensional (3D) CAD drawings of most Grundfos pumps.
These formats are available in WebCAPS:
2-dimensional drawings:• .dxf, wireframe drawings• .dwg, wireframe drawings.
3-dimensional drawings:• .dwg, wireframe drawings (without surfaces)• .stp, solid drawings (with surfaces)• .eprt, E-drawings.
0 1
Subject to alterations.
41
42
43
GRUNDFOS A/S . DK-8850 Bjerringbro . DenmarkTelephone: +45 87 50 14 00www.grundfos.com
The name Grundfos, the Grundfos logo, and the payoff Be–Think–Innovate are registrated trademarks owned by Grundfos Management A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
Being responsible is our foundationThinking ahead makes it possible
Innovation is the essence
98255748 0812
ECM: 1098007
