Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
ElectricalSnap action electrical switchrecognized by Underwriters’Laboratories, Inc. and CSAInternational
Electrical Connection1/2 NPT male conduit connectionwith PVC insulated 18 AWG,18" long leads
Process Connection1/2 NPT Male Direct mount
System Pressure1500 psig maximum
Proof Pressure2250 psigAdjustmentInternal, slotted adjustment nut with range scale
Temperature RangeAmbient: -40°F to +180°F
(-40°C to +82°C)Shipping WeightApproximately 2.5 pounds
Neo-Dyn® Series 132T Temperature Switch/ Internal Adjustment
Operating Temperature Data
Standard Specifications Ordering Sequence — Select desired option for each category
Compact, adjustable, direct mount temperature switch featuring the efficient Nega-Rate® Belleville disc spring for set pointstability and vibration resistance.
When factory presetting is desired,stipulate set point, increasing ordecreasing
Insert available option letterdesignation as required
SeriesWetted MaterialAdjustable RangeElectrical FormEnclosureMiscellaneous
132T
OPTIONSWetted Material4 300 Series stainless steel port and probe assembly, Teflon seal
Adjustable RangeB -69°F dec. to +30°F inc.D +7°F dec. to +125°F inc.F +70°F dec. to +200°F inc.H +89°F dec. to +230°F inc.J +146°F dec. to +300°F inc.L +236°F dec. to +360°F inc.N +263°F dec. to +395°F inc.
Electrical FormC 11 amp, 1/4 hp at 125 or 250 VAC; 5 amp resistive, 3 amp inductive at 28 VDC;
.5 amp resistive at 125 VDCCC 11 amp, 1/4 hp at 125 or 250 VAC; 5 amp resistive, 3 amp inductive at 28 VDC;
.5 amp resistive at 125 VDC
Enclosure3 Meets or exceeds the requirements of NEMA Type 3, 3R, 3S, 4, 4X and 13
MiscellaneousA Epoxy paint exterior — extra protection for severe environmentsD SIL approval and marking, per IEC61508 (includes FMEA report)I 3/4 NPT conduit box with terminal stripJ Annealed stainless steel port screws for H2S environmentsM Gold electrical contacts for extremely low current applicationsR 72" Electrical free leadsX CE Mark
Special (Consult representative or factory)• Thermowells• Non-catalog adjustable range and/or set point and deadband• Non-standard probe lengths
AdjustableRange
BDFHJLN
Adjustable Set Point Range
Increasing °F-50 to +30+30 to +125+95 to +200
+115 to +230+175 to +300+260 to +360+290 to +395
Decreasing °F-69 to +26+7 to +121
+70 to +196+89 to +224
+146 to +294+236 to +356+263 to +391
†Deadband decreases as the adjustable set point is increased. For narrow deadband select set point in upper half of adjustable range.
4B CC3 _
Ordering Procedure Example
Weather Proof(NEMA 4 and 13)
19/423/425/426/629/624/427/4
250300400400500500500
11 / 213 / 214 / 214 / 316 / 313 / 215 / 2
121149204204260260260
Proof TemperatureDeadband† (approx) Bottom/Top
(-56°C dec. to -1°C inc.)(-14°C dec. to 52°C inc.)(21°C dec. to 93°C inc.)(32°C dec. to 110°C inc.)(63°C dec. to 149°C inc.)(113°C dec. to 182°C inc.)(128°C dec. to 202°C inc.)
°F °C °F °C
Neo-Dyn®
Order MiscellaneousOption “D”
132T_132T.QXD 1/18/2018 2:34 PM Page 1
1.50 SQ
.56
.25
1.12
Pressure Port¹⁄x NPT
Conduit Connection¹⁄x NPT
.209 Dia. Mtg.Holes (2 places)
Free Leads18 AWG18" Long
5.92Max.
1.6 AdjustmentCover
3.5
Temperature Probe
Negative RateBellevilleDisc Spring
Snap ActionElectricalElement
AdjustmentActuator
Minimum Bearing Points
aá~éÜê~Öã
mêÉëëìêÉ=mä~íÉ
Series 132TField Adjustable -69°F to +395°F
Envelope Dimensions
Electrical Form
Basic Principles of Design
FORM "C"(SPDT)
RED
BRN
BLU
NC1
INCT
C1
NO1
(X-Option) GRN
FORM "CC" (DPDT)
RED
BRN
BLU
BLK
YEL
VIO
NC1
INC T
C1
NO1
NC2
C2
NO2
GRN
Pressure Port½ NPT
Conduit Connection½ NPT
Neo-Dyn®
28150 Industry DriveValencia, CA 91355tel: 864-647-9521fax: 864-647-9574www.neodyn.com Specifications and dimensions subject to change.
AER0935_26 7/13
132T_132T.QXD 1/18/2018 2:35 PM Page 2