Upload
hollie-smith
View
215
Download
0
Tags:
Embed Size (px)
Citation preview
NETWORKING COMPONENTS
Buddy Steele
Assignment 3, Part 1
CECS-5460: Summer 2014
HUB
How it Works: Operating at various OSI Level1, a hub connects
computers in a network and allows information to be sent between them. A hub is not able to identify the source or destination of information sent through it, so it delivers the information sent to every computer/device connected to it.
Typical Use: Typically, hubs would be used to link all
computers in a network so they can all send and/or receive data to one another. But, hub-like capabilities are commonly built in to routers and other devices, so a stand-alone hub is rarely useful for the consumer.
Cost: $20 - $100 Cost increases as number of ports increases.
SWITCH
How it Works: Operating at OSI Level 2, a switch also sends
and receives information between computers in a network. But, a switch is able to identify the destination for the information sent and is therefore able to send information only to specific computers that are connected. Also, a switch is able to send and receive information at the same time.
Typical Use: Because it can send and receive simultaneously,
switches are good for environments where one needs to share information quickly in real time, such as: local gaming, media sharing, etc.
Cost: $40 - $250 Cost increases as number of ports increases.
ROUTER
How it Works: Operating at OSI Level 3, a router connects two
existing networks. The router directs network traffic and enables all computers on a network to connect to the internet through one modem.
Typical Use: Routers are generally used to allow multiple
devices to connect to the internet. Offering both wired and wireless connections, routers are good for connecting multiple devices in the home or office to a single internet connection.
Cost: $65 - $200 Higher priced models often include wireless AP,
bridge, and multiple ports.
BRIDGE
How it Works: Operating at OSI Levels 1 and 2, a bridge is
used to connect two or more networks so that networks of different types can communicate with one another (i.e. a wired network and a wireless network.)
Typical Use: A bridge is often used when file sharing is
needed between multiple networks. In an office environment, a bridge is helpful in that wireless network users can share files and communicate with wired network users.
Cost: $45 - $100
GATEWAY
How it Works: Capable of operating at any OSI Level, a gateway
is a node which allows computer networks to communicate despite operating at different protocols. The gateway will retrieve information that is accessed outside of the local network.
Typical Use: Gateways are typically used as the source for
accessing and retrieving information on the internet. A gateway allows a user to access websites and other content that is not accessible on their local network.
Cost: $250 - $3,500 Cost increases as available options and
capabilities increase.
FIREWALL
How it Works: Operating at various OSI Levels, depending on the
implementation, a firewall acts as a security device to filter and control what is sent and received by a computer or network. A firewall can be either a hardware or software tool and can be configured to allow or block specific content.
Typical Use: In most cases, a router contains a built in firewall
for a home or small office network. But, software firewalls on individual computers can also help keep a computer protected when accessing the internet outside of their usual network.
Cost: Free - $3,500 Some software firewall solutions are pre-installed on
devices or exist at the ISP level. Dedicated firewall solutions increase in price as their capabilities and customization potential increases.
WIRELESS ACCESS POINT
How it Works: Operating at OSI Level 2, a wireless access
point connects devices to a wired network via wireless connection. A device can locate the access point wirelessly and connect to the network to which the AP is connected.
Typical Use: An access point is typically used to connect
devices to a network without having to be in close proximity to the network. Many routers have built in AP’s allowing a user to connect directly with it, but AP’s can also be added to existing modems with built in routers.
Cost: $40 - $1,000 Cost increases as speed and device support
potential increases.
ALL DEVICES IN NETWORK DIAGRAM
Switch or Hub
Bridge
Wireless AP
FirewallGateway
Router
Internet