21
New Features in New Features in DeltaV SimulatePro DeltaV SimulatePro Available in DeltaV v7.2

New Features in DeltaV SimulatePro Available in DeltaV v7.2

Embed Size (px)

Citation preview

Page 1: New Features in DeltaV SimulatePro Available in DeltaV v7.2

New Features in New Features in DeltaV SimulateProDeltaV SimulateProAvailable in DeltaV v7.2

Page 2: New Features in DeltaV SimulatePro Available in DeltaV v7.2

DeltaV SimulatePro – DeltaV v7.2DeltaV SimulatePro – DeltaV v7.2DeltaV SimulatePro – DeltaV v7.2DeltaV SimulatePro – DeltaV v7.2

New DeltaV SimulatePro features for operator training and control development and checkout.

Save and Restore – Allows a snapshot to be created of the control modules assigned to one or more PC nodes.

Convert – Automatically transforms blocks assigned to fieldbus to to their equivalent DeltaV function block. Also, changes external I/O reference parameters so that applications may read and write these parameters.

Page 3: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Background - DeltaV Simulate and DeltaV SimulatePro Background - DeltaV Simulate and DeltaV SimulatePro Environment for Operator Training and Engineering DevelopmentEnvironment for Operator Training and Engineering DevelopmentBackground - DeltaV Simulate and DeltaV SimulatePro Background - DeltaV Simulate and DeltaV SimulatePro Environment for Operator Training and Engineering DevelopmentEnvironment for Operator Training and Engineering Development

Multi-Node Environment Single-PC Environment

OPTIONAL

DeltaV SimulatePro License for ProPlus

or Application Station

Page 4: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Background - DeltaV Simulate/SimulatePro Background - DeltaV Simulate/SimulatePro Supports System Configuration and ExecutionSupports System Configuration and ExecutionBackground - DeltaV Simulate/SimulatePro Background - DeltaV Simulate/SimulatePro Supports System Configuration and ExecutionSupports System Configuration and Execution

Modules may be assigned and downloaded to a ProPlus or Application Station node for execution i.e. no hardware controller is required.

Operator displays, Control Studio on-line, alarming, historian, etc function as in the operating plant without any configuration changes.

Support provided for both continuous and batch control.

Page 5: New Features in DeltaV SimulatePro Available in DeltaV v7.2

OPC Read of

OUT

OPC Write to Simulate

Process Simulation

OPC Client Driver

DeltaV Module

Background - Process Simulation Packages May Background - Process Simulation Packages May be Integration Using OPCbe Integration Using OPCBackground - Process Simulation Packages May Background - Process Simulation Packages May be Integration Using OPCbe Integration Using OPC

Page 6: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Background - DeltaV Simulate Pro Adds Features for Background - DeltaV Simulate Pro Adds Features for Operator Training and Engineering DevelopmentOperator Training and Engineering DevelopmentBackground - DeltaV Simulate Pro Adds Features for Background - DeltaV Simulate Pro Adds Features for Operator Training and Engineering DevelopmentOperator Training and Engineering Development

All inputs blocks assigned to a node may be changed to Simulate Enable or Disable, Setup or Normal mode with a single request.

Initialization of all dynamic blocks to steady state with a single request.

Faster or Slower than real-time execution of all modules assigned to a node.

Page 7: New Features in DeltaV SimulatePro Available in DeltaV v7.2

New Feature - On-Demand Save RequestNew Feature - On-Demand Save RequestNew Feature - On-Demand Save RequestNew Feature - On-Demand Save Request

Choose the node(s) and provide Save file description

Page 8: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Auto Save OptionAuto Save OptionAuto Save OptionAuto Save Option

Choose period, nodes, description

Page 9: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Restoring All or Parts of SnapshotRestoring All or Parts of SnapshotRestoring All or Parts of SnapshotRestoring All or Parts of Snapshot

1

2 3

Page 10: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Updating a Save FileUpdating a Save FileUpdating a Save FileUpdating a Save File

The following procedure should be followed to allow previous save file values to be retained

Load the configuration used when the last save file was created. Request a Restore (with option to resume execution NOT selected)  

Import new or modified modules, assign to PC nodes and do a partial download.

Set the desired initial value of the parameters in the modules that were downloaded

Request a Save to create an updated Save file

Page 11: New Features in DeltaV SimulatePro Available in DeltaV v7.2

New Feature - SimulatePro ConvertNew Feature - SimulatePro ConvertNew Feature - SimulatePro ConvertNew Feature - SimulatePro Convert Convert may be

accessed by right clicking on the PC node in DeltaV Explorer.

All blocks assigned to fieldbus are changed to their equivalent controller blocks

All external I/O references are redefined as external parameter references

Page 12: New Features in DeltaV SimulatePro Available in DeltaV v7.2

After Executing SimulatePro ConvertAfter Executing SimulatePro ConvertAfter Executing SimulatePro ConvertAfter Executing SimulatePro Convert A new module whose tag is “M_PC name” appears in the

list of assigned modules.

Converted modules show up as needing to be downloaded since the modules have been changed.

New Module Automatically

Created

Page 13: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Devices Referenced in Example ModulesDevices Referenced in Example ModulesDevices Referenced in Example ModulesDevices Referenced in Example Modules Foundation

Fieldbus transmitter and valve

PLC with data sets defined for input and holding registers

Page 14: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Conversion of Blocks Assigned to FieldbusConversion of Blocks Assigned to FieldbusConversion of Blocks Assigned to FieldbusConversion of Blocks Assigned to Fieldbus Blocks

assigned to fieldbus are automatically changed to their equivalent DeltaV block.

Conversion is one way and thus should be done using a copy of the primary database.

Page 15: New Features in DeltaV SimulatePro Available in DeltaV v7.2

On-line Execution of Converted Module On-line Execution of Converted Module Containing Fieldbus BlocksContaining Fieldbus BlocksOn-line Execution of Converted Module On-line Execution of Converted Module Containing Fieldbus BlocksContaining Fieldbus Blocks

All blocks execute as they would in fieldbus.

Control logic may be checked out by enabling Simulate in input blocks

Blocks execute exactly as they will in fieldbus devices.

Page 16: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Example of Module Using External I/O ReferencesExample of Module Using External I/O ReferencesExample of Module Using External I/O ReferencesExample of Module Using External I/O References External I/O references

are commonly used in modules.

Provide a means of including input/output from PLC’s, sub-systems, and fieldbus e.g. Asi, DeviceNet, Profibus.

In a simulation environment, these external I/O references are invalid. DeltaV SimulatePro Convert addresses this issue.

Page 17: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Reference Module

Conversion of Modules with I/O ReferencesConversion of Modules with I/O ReferencesConversion of Modules with I/O ReferencesConversion of Modules with I/O References I/O references are

automatically converted to external parameter references – no impact on displays that use these parameters.

A new module is automatically created that contains all parameter referenced by modules assigned to the node

The new module’s name is “M_ PC machine name”

Converted Module

Page 18: New Features in DeltaV SimulatePro Available in DeltaV v7.2

On-line Execution of Converted ModuleOn-line Execution of Converted ModuleOn-line Execution of Converted ModuleOn-line Execution of Converted Module Referenced

parameters in the new modules may be read and written from control studio – allowing control logic to be checked out.

Process Simulate packages may read and write these reference parameters using OPC.

Modules may be created that use these parameters to duplicate the logic contained in the PLC, subsystem etc.

Page 19: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Converted Reference May be Viewed and Converted Reference May be Viewed and Values Changed from SimulateProValues Changed from SimulateProConverted Reference May be Viewed and Converted Reference May be Viewed and Values Changed from SimulateProValues Changed from SimulatePro

Page 20: New Features in DeltaV SimulatePro Available in DeltaV v7.2

Convert is One-WayConvert is One-WayConvert is One-WayConvert is One-Way Always import

modules into the training or development system from the plant’s DeltaV control system.

Periodically Import any changes or updates in the modules or displays.

Control System

Import

Operator Training or Engineering Test System

Page 21: New Features in DeltaV SimulatePro Available in DeltaV v7.2

SummarySummarySummarySummary

The DeltaV SimulatePro Save and Restore features are useful for operator training and in engineering development and control checkout.

The SimulatePro Convert feature allows blocks assigned Fieldbus and External I/O references to be automatically modified so they can be utilized in the DeltaV Simulate environment