New Products2013 - 2014

Clippard New Products 2014

Table of Contents Table of Contents ......................................................................................................................................... 1

SCPV .............................................................................................................................................................. 2

Stepper-Controlled Proportional Valve – Tech Data Bulletin 3.11 .................................................... 2 - 3

SCPV Cartridge & Manifold Configurations .............................................................................................. 4

Hi-Flow Proportional Valve Control Data (SCPV-1-3) ................................................................................ 5

HV ............................................................................................................................................................ 6 - 7

HV Toggle & Stem Valve Series ................................................................................................................ 6

HV-HTV Toggle & Stem Valve (PR) ........................................................................................................... 7

GV ......................................................................................................................................................... 8 - 10

GV Series High Flow Poppet Valves .................................................................................................... 8 - 9

GV-GTV Series High Flow Poppet Valves (PR) ........................................................................................ 10

EGV Series Electronic High Flow Poppet Valves ....................................................................................... 11

Analytical Series Electronic Solenoid Valves ..................................................................................... 12 - 13

2-Way Normally Closed High Flow Valves ................................................................................................ 14

3-Way Modular Check Valves ................................................................................................................... 15

MAR-2 Series Pressure Regulators ............................................................................................................ 16

In-Line Fixed Orifice Air Chokes ................................................................................................................ 17

PQ Flow Control Series ........................................................................................................................ 18 - 19

PQ Flow Control Series ........................................................................................................................... 18

PQ Flow Control Series (PR) ................................................................................................................... 19

Polypropylene Air Volume Tanks .............................................................................................................. 20

Utilizing the industry’s most robust and powerful linear actu-ator, the high-flow stepper-controlled proportional valve out-performs the competition in performance and durability.

The bonded elastomeric seat achieves excellent sealingensuring smooth opening and fine control at low flow for mil-lions of cycles.

This valve is ideal in critical applications such as gas deliv-ery, medical, analytical, and industrial automation requiringhigh resolution, high flow, and low hysteresis. In addition,the unique design allows for custom flow profiles whenrequired.

Technical Data Bulletin 3.11

Clippard Instrument Laboratory, Inc. 7390 Colerain Avenue • Cincinnati, OH 45239 • 877-245-6247 • Fax 513-521-4464 • www.clippard.com/scpv

Valve Type: 2-Way Proportional Needle Valve

Configuration: 1 1/8” square body with 1/8” NPT ports

Typical Cycle Time 0.95 seconds at 100% duty cycle;

for Full Travel: 0.55 seconds at 25% duty cycle

(full open to full close or full close to full

open)

Medium: Compatible gases and liquids

Wetted Material: Stainless steel, aluminum, brass, and

FKM*

Pressure Range: Vac to 100 psig (Vac to 7 bar)*

Flow Range: 0 to 300 slpm*

Flow Resolution: 0.56 slpm/step

Position Resolution: 0.001” per step

Temperature Range: 32 to 184°F (0 to 84°C)

Driver: Bipolar chopper drive required

Supply Voltage: 12 to 40 VDC (40 VDC optimal)

Response Time: 0.95 sec. fully-open to fully-closed*

Mounting: In-line

Power Consumption: 3.85 watts nominal only during

adjustment

Zero power consumption to maintain

position

Ports: 1/8” NPT. Others available upon request.

Seals: FKM standard. Others available.

* This product is highly modifiable for OEM applications including alternate body materials, flow profiles, cartridge styles, manifold mounting, etc. Please consult factory.

Stepper-Controlled Proportional Valve

• 2% hysteresis• Excellent linearity — 2.5% of full-scale• 2 ms reaction time• Millions of cycles• Holds position for power savings or at loss

of power

Characteristic CurveFlow Rate for SCPV-1-3 @ 100 psig

SCPV-1-3OEM Custom Application Possibilities

Brass housingand internals

Anodized aluminum body

Customizable stainlesssteel needle 3.0° taperstandard

Viton bondedelastomer seat

Stepper-controlled linear actuator with acme lead screw

1/8” NPT inletand outlet ports

Clippard Instrument Laboratory, Inc. 7390 Colerain Avenue • Cincinnati, OH 45239 • 877-245-6247 • Fax 513-521-4464 • www.clippard.com/scpv

Control DataA Bipolar Chopper Drive (not included) is a power-efficient method ofusing current to drive a stepping motor to obtain high stepping rates. Thechopper gets its name from the technique of rapidly turning the outputvoltage on and off (chopping) to control motor current.

Stepper motors require some external electrical components in order tooperate. These components typically include a power supply, logicsequencer switching components and a clock pulse source to determinethe step rate. Many commercially available drives have integrated thesecomponents into a complete package. See www.clippard.com/scpv formore information.

Salient CharacteristicsLinear Actuator

Wiring: BipolarCurrent/Phase: 385 mAMotor Voltage: 5 VDCResistance/Phase: 13 ohmsInductance/Phase: 8.08 mHPower Consumption: 3.85 WattsRotor Inertia: 1.07 gcm2Temperature Rise: 135°F (75°C)Insulation Resistance: 20M ohms

Wiring Harness (included)

Maximum Step Pulse Frequency vs. Operating Pressure

Distributed ByWarranty See www.clippard.com/warranty

Order No. DescriptionSCPV-1-3 Proportional Valve, 3° Needle

Potential Applications

• Medical/Analytical/Industrial Gas Mixing• Anesthesia Equipment• Precision Flow Control• Cuff/Bladder Pressure Control• Process Flow Control• Variable Speed Control• Automation of Needle Valve

Functional Diagram

Clippard New Products 2013

Clippard SCPV Cartridge & Manifold Configurations Clippard‘s SCPV Stepper-Controlled Proportional Valve Series now includes two new configurations. The new SCPV valves combine the same excellent linearity, hysteresis and repeatability of the SCPV-1-3 with the added benefits of even more compact, easy-to-assemble cartridge and manifold styles.

Utilizing the industry's most robust and powerful linear actuator, the high-flow, stepper-controlled 2-way proportional SCPV valve is unsurpassed in performance and durability. It is ideal in critical applications requiring high resolution, high flow and low hysteresis such as gas delivery, medical, analytical and industrial automation applications.

Features

• Less than 2% hysteresis • Excellent linearity—2.5% of full-scale • 2 ms reaction times • Millions of cycles • Holds position for power savings or at a loss of power • Acetal seat for customizable flow curve characteristics • FKM seat option also available

Hi-Flow Proportional Valve Control Data (SCPV-1-3)

Salient CharacteristicsLinear Actuator, 1” (25 mm)

Wiring: BipolarCurrent/Phase: 385 mAMotor Voltage: 5 VDCResistance/Phase: 13 ohmsInductance/Phase: 8.08 mHPower Consumption: 3.85 WattsRotor Inertia: 1.07 gcm2Temperature Rise: 135°F (75°C)Insulation Resistance: 20M ohms

Wiring Diagram

Clippard Instrument Laboratory, Inc.513-521-4261 • www.clippard.com/scpv

A Bipolar Chopper Drive (not included) isa power-efficient method of using currentto drive a stepping motor to obtain highstepping rates. The chopper gets its namefrom the technique of rapidly turning theoutput voltage on and off (chopping) tocontrol motor current.

Stepper motors require some external elec-trical components in order to operate.These components typically include apower supply, logic sequencer switchingcomponents and a clock pulse source todetermine the step rate. Many commer-cially available drives have integratedthese components into a complete pack-age. See www.clippard.com/scpv for moreinformation.

12.00 0.500

100

90

80

70

60

50

40

30

20

10

0

psig

545 550 555 560 565 570 575 580 585 590 595 hertz

Stepping Sequence

Maximum Step Pulse Frequencyvs. Operating Pressure

Black (A-)

Blue (B+)Green (B-)Red (A+)

Q3 Q4

Q1 Q2

Q7 Q8

Q5 Q6

+V+V

Bipolar

N SBlack (A-)

Bipolar Step 1 On Off On Off 2 Off On On Off 3 Off On Off On 4 On Off Off On 1 On Off On Off

CW

Rot

atio

n

Q2-Q3 Q1-Q4 Q6-Q7 Q5-Q8

Pin Color 1 Red (A+) 2 Black (A-)

Pin Color 3 Green (B-) 4 Blue (B+)

Red (A+)

Black (A-)

Blue (B+)

Green (B-)

ProgrammableLogic

Controller

12 to 40 VDC Unregulated

Power Supply

SCPV Driver

SCPV-1-3

step (PLC Output Signal)

direction (PLC Output Signal)

Functional Diagram

• Small, compact size, lightweight• Design flexibility and fast response• Clippard standard stem option available for use with inter-

changeable actuators (see www.clippard.com for complete line)• 15/32-32 male thread for panel mounting• Bright dipped brass construction for long life and corrosion

resistance• Stainless steel stems and springs for corrosion resistance• HV-3 can be used as a Normally-Open or Closed 3-way valve• 4-way valves exhaust to atmosphere

Available in 3-way and 4-way configurations, these valves featurethe same benefits available with other Minimatic® brass valves:proven reliability, compact size, economical pricing, precisionmachining and more. These valves feature #10-32 inlet and out-let ports and are available as toggle or stem actuated, in additionto offering cartridge styles.

The HV-3 Series is a fully-ported 3-way valve. This can be used asa selector valve choosing between two separate pressures or flu-ids (port 2 or 4) going to a single output (port 1). Being fully-port-ed, the inverse will work as well using the valve as a diverter send-ing a fluid (port 1) to two separate outputs (port 2 or 4). Also, thevalve may be used as a Normally-Closed or Normally-Open 3-way valve. The HV-4 series is a 4-way valve that vents its exhaustports to atmosphere and is ideal for powering simple cylinderapplications.

HV Toggle & Stem Valve Series

Medium: 3-Way: Air, Water or Oil; 4-Way: Air

Input Pressure: 150 psig max.

Air Flow: 6.5 scfm @ 50 psig; 11.8 scfm @ 100 psig

Temperature Range: 32 to 230°F (0 to 110°C)

Ports: #10-32 / Cartridge

Force for Full Stem Travel: 4 1/2 lb. nominal

Stem Travel: 1/8”

Mounting (Cartridge Style): Inserts into a 1/2” bore (see details below)

Stem: Stainless Steel

Seals: Buna-N, Fluorocarbon optional

Toggle: Electroless Nickel-Plated Steel or Plastic

Clippard Instrument Laboratory, Inc. 7390 Colerain Avenue • Cincinnati, OH 45239 • 877-245-6247 • 513-521-4261 • Fax 513-521-4464 • www.clippard.com

Technical Data Bulletin 6.13

0.5861.8430.761

HV-3C & HV-4C HTV-3C(F) & HTV-4C(F)

HV-3 & HV-4 HTV-3(F) & HTV-4(F)

Part No. DescriptionHV-3 Selector/Diverter Stem ValveHV-3C Selector/Diverter Stem Cartridge ValveHTV-3 Selector/Diverter Valve, ENP Steel ToggleHTV-3F Selector/Diverter Valve, Plastic ToggleHTV-3C Selector/Diverter Cartridge Valve, ENP Steel ToggleHTV-3CF Selector/Diverter Cartridge Valve, Plastic ToggleHV-4 4-Way Stem ValveHV-4C 4-Way Stem Cartridge ValveHTV-4 4-Way Valve, ENP Steel ToggleHTV-4F 4-Way Valve, Plastic ToggleHTV-4C 4-Way Cartridge Valve, ENP Steel ToggleHTV-4CF 4-Way Cartridge Valve, Plastic Toggle

Distributed by:

exhaust(4-way only)

0.495 dia.

0.124 dia.

0.063

0.312

1.375

1

4 2

exhaust(4-way only)

60°

1.697 0.6050.761

® Minimatic is a registered trademark of Clippard Instrument Laboratory, Inc.

1.469

±0.0020.530 dia.

±0.0010.500 dia.

0.045

+0.003-0.0000.039

0.4590.7090.959

0.096dia.

0.250

pin locationfor anti-rotationof valve0.250

0.7841.0341.284

1.791

15/32-32 thd.

1.875

0.250

0.312

0.124 dia.0.688 dia.

0.7501

4 2

exhaust(4-way only)

exhaust(4-way only)

7 3 9 0 C o l e r a i n Av e n u e • C i n c i n n a t i , O h i o 4 5 2 3 9 • 5 1 3 . 5 2 1 . 4 2 6 1 • w w w. c l i p p a r d . c o m

C • I • L COMMUNICATIONS

New Clippard HV-HTV Toggle & Stem Valve

Series Including Cartridge Styles Available Now!

Cincinnati, Ohio -- Available in 3-way and 4-way configurations, Clippard’s new HV-HTV valves feature

the same benefits available with other Minimatic® brass valves: proven reliability, compact size, economical

pricing, precision machining and more. These valves feature #10-32 inlet and outlet ports and are available

as toggle or stem actuated, in addition to offering cartridge styles. Flows to 15 scfm @ 100 psig.

The HV-3 Series is a fully-ported 3-way valve. This can be used as a selector valve choosing between two

separate pressures or fluids going to a single output. Being fully-ported, the inverse will work as well using

the valve as a diverter sending a fluid to two separate outputs. Also, the valve may be used as a Normally-

Closed or Normally-Open 3-way valve. The HV-4 series is a 4-way valve that vents its exhaust ports to

atmosphere and is ideal for powering simple cylinder applications.

• Design flexibility and fast response

• Clippard standard stem option available for use with inter-changeable actuators (see www.clippard.com

for complete line)

• Bright dipped brass construction for long life and corrosion resistance

For more information about these control valves or any of Clippard’s 5,000 other pneumatic products, call

513-521-4261 or visit www.clippard.com.

Clippard Instrument Laboratory, Inc.

7390 Colerain Avenue | Cincinnati, OH 45239

877-245-6247 | 513-521-4261

www.clippard.com

# # #

Clippard Instrument Laboratory, Inc. 7390 Colerain Avenue • Cincinnati, OH 45239 • 513-521-4261 • 877-245-6247 • Fax 513-521-4464 • www.clippard.com

Technical Data Bulletin 7.2.13

GTV-2Q-P12 & GTV-3Q-P12 GTV-2-P12 & GTV-3-P12

GTV-2 & GTV-3 GTV-2Q & GTV-3Q

• Will accept a variety of manual, air pilot, electrical ormechanical actuators

• Small, compact size, lightweight• Design flexibility and fast response• Electroless nickel plated brass and anodized aluminum

construction for long life and corrosion resistance• Stainless steel stems and springs for corrosion resistance• Optional Corrosion-Resistant Series also available that

incorporates ENP brass replacing the annodized aluminumto provide enhanced protection for valves used with mildly corrosive media such as moisture in air or gases. Add “CR-” to the beginning of each part number.

Clippard is known as the pioneer of miniaturepneumatic products. The MAV series poppetvalves were introduced in 1958 and were knownfor their bubble tight design with large flow for theirsmall #10-32 threaded ports.

Clippard’s GV series valves offer the same char-acteristics of its original line with flow 10 timesmore than the MAV series and 2.5 times the flow ofthe MJV series. These 2-way and 3-way valves areoffered in 1/4” NPT and 3/8” push-quick portsalong with a cartridge mounted version. WithClippard’s versatile 15/32-32 nose thread, a largevariety of buttons and valve actuators can be usedwith the GV stem operated valves. The GTV seriesare toggle valves with panel mounting capabilities(5/8-32 nose thread). The outlet port on all GVvalves can be easily positioned to any orientationfor mounting convenience.

Medium: 2-Way: Air, Water or Oil; 3-Way: Air

Input Pressure: 150 psig max.

Air Flow: 38 scfm @ 50 psig; 67 scfm @ 100 psig

Temperature Range: 32 to 230°F (0 to 110°C)

Ports: 1/4” NPT, 3/8” Push-Quick, Cartridge

Force for Full Stem Travel: 9 lb. nominal @ 100 psig

Stem Travel: 1/8”

Mounting (Cartridge Style): Inserts into a 0.687” bore

Stem: Stainless Steel

Toggle: Electroless Nickel-Plated Steel

Seals: Nitrile, FKM optional

GV Series High Flow Poppet ValvesToggle, Stem & Cartridge Styles

50°

1/4” NPTinlet

exhaust

0.9842.161

0.375

5/8-32 thd.

1.313

1/4” NPToutlet

1/4” NPToutlet

2.286

0.375

1/4” NPTinlet

3/8” O.D.push-quickoutlet

1.633

1/4” NPTinlet

3/8” O.D.push-quickoutlet

3/8” O.D.push-quickinlet

2.490

0.875

Order InformationPart No. DescriptionGTV-2 2-Way Toggle Valve, 1/4” NPT FemaleGTV-2Q 2-Way Toggle Valve, 1/4” NPT MaleGTV-2Q-P12 2-Way Toggle Valve, 1/4” NPT, 3/8” PQ FittingGTV-2-P12 2-Way Toggle Valve, 3/8” Push-Quick FittingsGTV-3 3-Way Toggle Valve, 1/4” NPT FemaleGTV-3Q 3-Way Toggle Valve, 1/4” NPT MaleGTV-3Q-P12 3-Way Toggle Valve, 1/4” NPT, 3/8” PQ FittingGTV-3-P12 3-Way Toggle Valve, 3/8” Push-Quick Fittings

For optional Corrosion-Resistant Series, add “CR-” to the beginning of each part number

Professionally Distributed by:

1.636

0.186 dia.

0.312

0.063

0.793

inlet exhaustoutlet

1.633

1/4” NPTinlet

3/8” O.D.push-quickoutlet

3/8” ODpush-quickinlet

3/8” O.D.push-quickoutlet

2.340

0.875

1/4” NPToutlet

0.186 dia.

1/4” NPTinlet

1.313

0.312

exhaust

2.0110.375

15/32-32 thd.

0.678 dia.

1/4” NPToutlet

1/4” NPTinlet

0.3752.136

GV-2C & GV-3C

GV-2Q-P12 & GV-3Q-P12 GV-2-P12 & GV-3-P12GV-2 & GV-3 GV-2Q & GV-3Q

Clippard Instrument Laboratory, Inc. 7390 Colerain Avenue • Cincinnati, OH 45239 • 513-521-4261 • 877-245-6247 • Fax 513-521-4464 • www.clippard.com

Technical Data Bulletin 7.2.13

Order InformationPart No. DescriptionGV-2C 2-Way Stem Cartridge ValveGV-2 2-Way Stem Valve, 1/4” NPT FemaleGV-2Q 2-Way Stem Valve, 1/4” NPT MaleGV-2Q-P12 2-Way Stem Valve, 1/4” NPT, 3/8” Push-Quick FittingGV-2-P12 2-Way Stem Valve, 3/8” Push-Quick Fittings

For optional Corrosion-Resistant Series, add “CR-” to the beginning of each part number

Stem & Cartridge Styles

Order InformationPart No. DescriptionGV-3C 3-Way Stem Cartridge ValveGV-3 3-Way Stem Valve, 1/4” NPT FemaleGV-3Q 3-Way Stem Valve, 1/4” NPT MaleGV-3Q-P12 3-Way Stem Valve, 1/4” NPT, 3/8” Push-Quick FittingGV-3-P12 3-Way Stem Valve, 3/8” Push-Quick Fittings

Single-Acting, Spring Return AirPilot ActuatorsClippard’s MPA Series are ideal actuators forthe GV valves offering numerous threads,bore sizes and force factors.

• Input Pressure: 250 psig

• Constructed of brass, stainless steel, nitrile rubber and Acetal

• Mounting via 15/32-32 female thread

Order InformationPart No. Thread Bore Size Min. Pilot Pressure*MPA-3 #10-32 0.375” 100 psigMPA-3P 1/8” NPT 0.375” 100 psigMPA-5 #10-32 0.625” 40 psigMPA-5P 1/8” NPT 0.625” 40 psigMPA-7 1/8” NPT 0.875” 25 psigMPA-10P #10-32 1.250” 15 psig

* with 100 psig to valve inlet

Any 15/32-32 adapter or actuator canbe used on all stem-operated GVSeries valves

±0.0020.732 dia

0.066

1.7450.847

±0.0010.687 dia

+0.003-0.0000.039

7 3 9 0 C o l e r a i n Av e n u e • C i n c i n n a t i , O h i o 4 5 2 3 9 • 5 1 3 . 5 2 1 . 4 2 6 1 • w w w. c l i p p a r d . c o m

C • I • L COMMUNICATIONS

Clippard GV-GTV Series High Flow Poppet Valves

Including Cartridge Styles Available Now!

Cincinnati, Ohio -- Clippard’s GV series valves offer a bubble tight design with high flow

rates of 38 scfm @ 50 psig; 67 scfm @ 100 psig. These compact 2-way and 3-way valves

are offered in 1/4” NPT and 3/8” push-quick ports along with a cartridge mounted version.

With Clippard’s versatile 15/32-32 nose thread, a large variety of buttons and valve

actuators can be used with the GV stem operated valves. The GTV series are toggle valves

with panel mounting capabilities. The outlet port on all GV valves can be easily posi-

tioned to any orientation for mounting convenience.

• Will accept a variety of manual, air pilot, electrical or mechanical actuators

• Design flexibility and fast response

• Stainless steel stems and springs for long life and corrosion resistance

• Corrosion-resistant series also available

For more information about these control valves or any of Clippard’s 5,000 other

pneumatic products, call 513-521-4261 or visit www.clippard.com.

Clippard Instrument Laboratory, Inc.

7390 Colerain Avenue | Cincinnati, OH 45239

877-245-6247 | 513-521-4261

www.clippard.com

# # #

EGV Series Electronic High Flow Poppet Valves Clippard ‘s EGV Series valves are an electronically piloted version of the new GV series valves, ideal for large flow, low leak applications. Available in 1/8" NPT and manifold mount, they utilize Clippard 10 mm valves and offer both 12 & 24 VDC with special configurations available. These 2-way and 3-way valves provide 10x more flow than the MAV Series and 2.5x more flow than the MJV series! An externally piloted option is available for lower pressures and medias.

Features • Small, compact size, lightweight with high

flow • Design flexibility and fast response • Electroless nickel plated brass and anodized

aluminum construction for long life and corrosion resistance

• Proven poppet design

Minimum Pressure: 35 psig* Medium: Air* Input Pressure: 150 psig max. Air Flow: 38 scfm @ 50 psig; 67 scfm @ 100 psig Temperature Range: 32 to 230˚F (0 to 110˚C) Ports: 1/8" NPT, manifold mount Power Consumption: 1.3 watts Seals: Nitrile, FKM optional

*Other pressures and media are available with externally piloted versions. Contact Clippard for more information.

• Industry standard for leak-free operation

• 1,000,000,000 cycles

• Design flexibility and fast response

• Low heat rise/low power

• Enhanced cleaning procedures

For additional valve specifications and order information, visit www.clippard.com or

request a full-line catalog.

Clippard Minimatic electronic valves are precision-built 2-way or 3-way control valves, utilizing a unique, patentedvalving principle. There are no sliding parts. Completepoppet travel is a mere 0.007”. As a result, low powerconsumption, quiet operation and exceptionally long lifeare major benefits of this design.

The Analytical Series Valve (A-) combines the proven fea-tures of Clippard’s “Mouse” series with the specific needsof the analytical industry, and for applications wherecleanliness is especially important. Special materials,manufacturing and assembly processes make this valveperfectly-suited for applications where internal cleanli-ness, bubble-tight operation, and long life are imperative.

Analytical Series Electronic Solenoid Valves

Integral fitting eliminatesmany leak points

No anaerobic sealant used

Electroless nickel-plated steel housing and core Buna-N seals standard

Cleaned per Clippard Standard ES-3.43

(see details at www.clippard.com/analytical)

Medium: Clean, dry air or non-corrosive gas (40 micronfilter)

Power Consumption: 0.67 watt

Temperature Range: 32 to 180°F (0 to 82°C)

Response: 5 to 10 milliseconds (nominal)

Operating Range: 90 to 150% of rated voltage

Voltage: 12 or 24 VDC

Mounting: Manifold only

Larger cross section O-ring improves sealing

One-piece base eliminates many leak points

One-piece base and one-piece core combine with specific design enhancements to create the "industry standardfor leak-free operation" in analytical and other scientific applications. Coil housing o-ring cross sections are alsoincreased from Clippard’s standard valve to add compression to these static seals. Elastomeric seals undergo special procedure for outgassing. These features and the removal of all anaerobic sealants and grease in theassembly process result in a valve uniquely suited for gas analytical systems and any application where leakageis a vital concern.

Clippard Instrument Laboratory, Inc. 7390 Colerain Avenue • Cincinnati, OH 45239 • 877-245-6247 • Fax 513-521-4464 • www.clippard.com/analytical

Technical Data Bulletin 4.12

Clippard’s “spider” is the only movingpart and its motion to operate the

valve is a mere 0.007” travel!

Material: ENP brass Option: Add -MR for metric version

Manifolds

1/8" NPT(external)

inlet port#10-32

(internal)

0.437

0.375

0.875

0.250

0.500

outlet port #10-32

0.125

0.218

0.125

0.437

0.875

““

#10-32 [M5] Inlet 1/8” NPT (R1/8) Outlet

1/8” NPT (R1/8) Inlet #10-32 [M5] Outlet

Dual Outlet1/8” NPT (R1/8) Inlet #10-32 [M5] Outlet

Part No.15490-1 Single Outlet Manifold

Part No.15490-2 Single Outlet Manifold

Part No.15490-3 Dual Outlet Manifold

Clippard Instrument Laboratory, Inc. 7390 Colerain Avenue • Cincinnati, OH 45239 • 877-245-6247 • Fax 513-521-4464 • www.clippard.com/analytical

Technical Data Bulletin 4.12 • For Warranty & Disclaimer Information, Visit www.clippard.com/warranty

0

5(10.6)

10(21.2)

15(31.8)

20(42.4)

25(53.0)

30(63.6)

35(74.2)

40(84.8)

0 10 20 30 40 50 60 70 80 90 100

Flow

, slp

m (

scfh

)

ECR, ETR, EVR, EWR Series, -H SeriesECR, ETR, EVR, EWR Series, -Low SeriesECR, ETR, EVR, EWR SeriesEC/ECO, ET/ETO, EV/EVO, EW/EWO Series, -H SeriesEC/ECO, ET/ETO, EV/EVO, EW/EWO Series, -L SeriesEC/ECO, ET/ETO, EV/EVO, EW/EWO Series

Note: Add “A-” prefix to any Clippard EC, ET, EV or EW standard series electronic valves where an Analytical version is available.

(Example: A-ET-2-12-L)For additional information, visit www.clippard.com/analytical.

Pressure (psig)

Electronic Valve Series Flow Chart

Distributed by:

Clippard New Products 2013

Clippard 2-Way Normally Closed High Flow Valves These new, higher flow electronic valves are available in in-line or manifold mount and allow for more than 2x higher flow in 2-way, normally-closed applications. With a low power consumption of only 1.2 watts, a response time of 10 milliseconds, and voltages of 12 or 24 VDC, these compact, lightweight valves offer unlimited flexibility in design.

Clippard Minimatic electronic valves are precision-built 2-way or 3-way control valves, utilizing a unique, patented valving principle. There are no sliding parts. Complete poppet travel is a mere 0.007”. As a result, low power consumption, quiet operation and exceptionally long life are major benefits of this design.

Features

• Industry standard for leak-free operation

• 1,000,000,000 cycles • Design flexibility and fast response • Low heat rise/low power • More than 2x higher flow

Medium: Clean, dry air (40 micron filter)

Power Consumption: 1.2 watts

Temperature Range: 32 to 150°F (0 to 66°C)

Response: 10 milliseconds (nominal)

Voltage: +/- 10% of rated voltage

Ports: #10-32 (M5 optional), in-line only

Clippard New Products 2013

Clippard 3-Way Modular Check Valves The R-337 is a 3-way, spring-return, fully-ported, piloted valve with an independent check valve in the same body. It can be used Normally-Open, Normally-Closed, as a diverter or as a selector.

The R-338 is a 2-position, 3-way, double-piloted, fully-ported valve also with an independent check valve. It can be used Normally-Open, Normally-Closed, as a 2-position diverter or as a 2-way selector.

Both valves can be used independently in a circuit or as 2-way valves by plugging the exhaust ports.

The R-612 integrates two independent check valves in one compact body, and the R-614 integrates four check valves in one compact valve body.

Features

• Easy manifold-mounted design • Integrated circuitry • Octoport outlet design • Multiple porting speeds piping • Micro gap construction - snap action &

no blow by

Flow: 9 scfm @ 100 psig Pilot Pressure Minimum: R-337: 40 psig; R-338: 20 psig Temperature: 32 to 180˚F Working Pressure: Vacuum to 150 psig

Clippard New Products 2013

MAR-2 Series Clippard’s new MAR-2 Series pressure regulators are robust, compact and reliable, with 10x greater accuracy than the MAR-1 Series!

Clippard regulators are offered in either relieving or non-relieving versions. Relieving regulators maintain constant pressure output even when downstream conditions change, while non-relieving regulators do not automatically compensate for changes in downstream flow or pressure. There is no vent to atmosphere with non-relieving regulators, and the output pressure can increase due to a downstream event.

Features

• Robust, compact & reliable • Excellent repeatability (+/- 0.5 psig) • 10x greater accuracy than the MAR-1 Series • Also available in cartridge & manifold mount

styles

Medium: Air Materials: Brass body, Nitrile seals, stainless steel stem & spring Air Flow: 3 scfm @ 50 psig; 5 scfm @ 100 psig; 120 lpm @ 6 bar Input Pressure: 125 psig Mounting: #15/32-32 thread, cartridge style, or manifold mount Adjustment: By means of a knob with micro-adjustment

Clippard New Products 2013

Clippard In-Line Fixed Orifice Air Chokes Clippard's Line of Minimatic® Fittings now includes a full family of orifice fittings from 0.004" up. Used in diagnostic, fixed flow control and bleeding applications, Clippard's reputation for craftsmanship and quality brings high value to even the simplest of pneumatic components.

Medium: Air Material: Brass Working Range: 0 to 300 psig max. Temperature Range: 32 to 230°F Length: 0.470" Hex Size: 5/16" Ports: #10-32 thread

• Small, compact size• Design flexibility and fast response• Complete rotation of the valve body around the bolt allows

for optimum positioning of tubing• Special adjustment needle design allows large adjustment

ranges with high precision• Ideal for use with polyurethane, nylon, polyethylene and

polypropylene tubing (see www.clippard.com)

PQ Flow Control Series

Medium: Air

Pressure Range: 0 to 150 psig

Vacuum: 0 to 29.5” Hg

Ports: #10-32, 1/8” NPT, 1/4” NPT, 3/8” NPT, 1/2” NPT

Adjustment: Knurled knob

Material: Nickel plated brass, plastic resin, stainless steel gripper ring, Nitrile seals

Clippard Instrument Laboratory, Inc. 7390 Colerain Avenue • Cincinnati, OH 45239 • 877-245-6247 • 513-521-4261 • Fax 513-521-4464 • www.clippard.com

Technical Data Bulletin 7.4.13

PQ-CV & PQ-CI PQ-FV

Professionally Distributed by:

PQ-FV In-Line Flow Controls can be easily added to existing circuitry and are lightweight and compact in size. Since it is atube-to-tube connection, in-line flow controls may be installedas a meter-in or meter-out device.

The PQ-C Elbow Controls are ideal for low cost and lightweightapplications when mounting directly to an NPT port on a cylinder or valve is required.

In the meter-out versions, intake air flows freely through the flowcontrol; exhaust air is metered out through an adjustment screw.With the meter-in series, air is metered in through an adjustmentscrew; exhaust air flows freely. Control is varied through a finely threaded adjustment screw. A locking nut is provided so it can be secured in its final setting.

"A"max. "T"

"W"

“H” hex

"A"

"G"

“D”dia.thruhole

"W"

Right Angle Meter-Out ControlsPart No. Tubing Size Thread “T” “H” Hex. “A” Max. “W”PQ-CV04N 1/8” #10-32 5/16” 1.230 0.990PQ-CV04P 1/8” 1/8” NPT 7/16” 1.630 1.165PQ-CV05N 5/32” #10-32 5/16” 1.210 0.990PQ-CV05P 5/32” 1/8” NPT 7/16” 1.570 1.130PQ-CV08N 1/4” #10-32 5/16” 1.240 1.090PQ-CV08P 1/4” 1/8” NPT 7/16” 1.615 1.215PQ-CV08Q 1/4” 1/4” NPT 9/16” 1.900 1.360PQ-CV12Q 3/8” 1/4” NPT 9/16” 1.950 1.610PQ-CV12W 3/8” 3/8” NPT 3/4” 2.395 1.690PQ-CV16Q 1/2” 3/8” NPT 3/4” 2.270 1.745

Right Angle Meter-In ControlsPart No. Tubing Size Thread “T” “H” Hex. “A” Max. “W”PQ-CI04N 1/8” #10-32 5/16” 1.230 0.990PQ-CI04P 1/8” 1/8” NPT 7/16” 1.630 1.165PQ-CI05N 5/32” #10-32 5/16” 1.210 0.990PQ-CI05P 5/32” 1/8” NPT 7/16” 1.570 1.130PQ-CI08N 1/4” #10-32 5/16” 1.240 1.090PQ-CI08P 1/4” 1/8” NPT 7/16” 1.615 1.215PQ-CI08Q 1/4” 1/4” NPT 9/16” 1.900 1.360PQ-CI12Q 3/8” 1/4” NPT 9/16” 1.950 1.610PQ-CI12W 3/8” 3/8” NPT 3/4” 2.395 1.690PQ-CI16W 1/2” 3/8” NPT 3/4” 2.270 1.745

In-Line Controls Part No. Tubing Size “D” Dia. “G” “A” “W”PQ-FV04 1/8” 0.125 0.550 1.087 1.570PQ-FV05 5/32” 0.125 0.550 1.250 1.570PQ-FV06M 6 mm 0.170 0.787 1.683 1.952PQ-FV08 1/4” 0.170 0.787 1.739 2.010PQ-FV08M 8 mm 0.170 0.860 1.744 2.173PQ-FV12 3/8” 0.170 1.023 2.105 2.520PQ-FV16 1/2” 0.170 1.260 2.156 2.881

dimensions are in inch increments

7 3 9 0 C o l e r a i n Av e n u e • C i n c i n n a t i , O h i o 4 5 2 3 9 • 5 1 3 . 5 2 1 . 4 2 6 1 • w w w. c l i p p a r d . c o m

C • I • L COMMUNICATIONS

Clippard Introduces New PQ Flow Control Series

Cincinnati, Ohio – Clippard’s new PQ-FV In-Line Flow Controls can be easily added to existing circuitry and are lightweight and compact in size. Since it is a tube-to-tube connection, in-line flowcontrols may be installed as a meter-in or meter-out device.

The PQ-C Elbow Controls are ideal for low cost and lightweight applications when mounting directlyto an NPT port on a cylinder or valve is required.

In the meter-out versions, intake air flows freely through the flow control; exhaust air is metered outthrough an adjustment screw. With the meter-in series, air is metered in through an adjustment screw;exhaust air flows freely. Control is varied through a finely threaded adjustment screw. A locking nutis provided so it can be secured in its final setting.

• Available in over 25 different models: #10-32, 1/8” NPT, 1/4” NPT, 3/8” NPT.• Design flexibility and fast response• Complete rotation of the valve body around the bolt allows for optimum positioning of tubing• Special adjustment needle design allows large adjustment ranges with high precision• Ideal for use with polyurethane, nylon, polyethylene and polypropylene tubing

For more information about these control valves or any of Clippard’s 5,000 other pneumatic products,call 513-521-4261 or visit www.clippard.com.

Clippard Instrument Laboratory, Inc.7390 Colerain AvenueCincinnati, OH 45239

513-521-4261 • 877-245-6247www.clippard.com

# # #

Clippard New Products 2013

Polypropylene Air Volume Tanks Clippard's new AVT-PP-35 Polypropylene Air Volume Tanks designed for the FIRST® Robotics Competition (FRC®) feature 1/4" push-quick connections, eliminating the need for threaded fittings.

Additional Information

Max PSI 125

Mount AVT-PP-CL

Ports 1/4 OD Tube Connector

Temperature Range 35-100F