www.copperrecovery.com

Wire Recycling Mini-Plant

The PHOENIX is a professional turn-key mini-plant with the substantial capacity to process *1,200-2,500 input lb/per hour with mixed cable, depending on size and yield. Process approximately 120,000 lb/per month with a one-shift operation. This estimate includes maintenance downtime for blade changing and lubrication. The cable granulator is equipped with a 50 hp motor but

can be upgraded to a 60 hp motor. The power requirement is 100 amps, three phase 480V circuit. The mini-plant is shipped in a 20 ft. container, with minimal on-site assembly required. Final installation assistance and training is provided by a Copper Recovery representative. Although compact in size, the granulator has an inner width of 20 inches, which facilitates easy conveyor feeding.

The cable should be pre-sorted for maximum output and in certain cases pre-cut, if not flexible by means of a hand cutter or alligator shears. Smaller plastic cable spools, coils, bundles, and rats nests can be fed directly onto the in-feed belt conveyor.

www.copperrecovery.com

Models Throughput* Free Space Requirements Plant HPPhoenix 2000 20’ x 20’ or 400 sq ft 75Phoenix + 2000 20’ x 30’ or 600 sq ft 125Phoenix XD 4000 30’ x 40’ or 1200 sq ft 150Phoenix XD+ 4000 40’ x 40’ or 1600 sq ft 200

HEADQUARTERS18072 Gothard StreetHuntington Beach, CA 92648

Wire Recycling Mini-Plant

All data information, statements, photographs and graphic illustrations in this leaflet are without any obligation and raise no liabilities to or form part of any sates contracts of  COPPER RECOVERY, INC. or any affiliates for equipment and/or systems referred to herein. © COPPER RECOVERY, INC. 2016. All rights reserved. No part of this copyrighted work may be reproduced, modified or distributed in any form or by any means, or stored in any database or retrieval system, without the prior written permission of COPPER RECOVERY, INC. Any such unauthorized use for any purpose is a violation of the relevant copyright laws. COPPER RECOVERY, INC., 18072 Gothard Street, Huntington Beach, CA 92648

CM50 cutting mill is available without upper & lower hopper or with custom hoppers to suit you application.

CM50 cutting mill is available as “stand alone” units, which can increase throughput by apporximately up to 25%*.

Heavy duty construction, including special alloy rotor and alloy knives featuring removable wear parts, make the CM50 the ultimate mill for wire processing.

GS94 Gravity Separator offers signif-icant throughput and flexibility with 4 output fractions. Process wire with copper & aluminum at the same time with one table! Available as a stand alone unit.

Strong magnetic separator conveyor included to ensure product quality & purity.

*Throughput depends on variable conditions, including material type & characteristics, screen size, etc. Figures provided are representative of real world achievable capacities.