New Materials and Processes

PART 3

Selected, peer reviewed papers from the

3rd International Conference on

Manufacturing Science and Engineering(ICMSE 2012),

March 27-29, 2012, Xiamen, China

Edited by

Wenzhe Chen, Qiang Li, Yonglu Chen,

Pinqiang Dai and Zhengyi Jiang

civ New Materials and Processes

PART 3

Chapter 8: New Energy Materials

The Research of Electrolyte on Lithium/Sulfur BatteryM.S. Zheng, J.J. Chen and Q.F. Dong 1763

Inkjet Printing Technology for Dye-Sensitized Solar Cells

Y.L. Lin, C.Y. Hsu and C.L. Tai 1767

Advanced Materials Research Vols. 476-478 cv

Investigation on the Electrochemical Cycle Stability of La-Mg-Ni-based A2B7-type AlloysPrepared by Melt Spinning

Y.H. Zhang, T. Yang, Z.H. Hou, G.F. Zhang, Y. Cai and D.L. Zhao 1771

Study on High Quality Polycrystalline Silicon p/n Films Fabrication throughRecrystallization by RTP

L.W. Zhang, X.L. Mei, J.X. Lu, R. Zhang, S.Y. Chu and ST. Wen 1776

Research on the Influence of Electron Beam Parameters on Molten Pool Morphologies duringElectron Beam Melting Silicon

F.M. Xu, Z. Gu, S. Shi, Y. Tan, D.C. Jiang and W. Dong 1781

Applicability of Gdo..jCa<uAI03.s Ceramic Electrolyte for Intermediate Temperature Solid

Oxide Fuel Cells

G.H. Liu, F. Wang and R.Q. Yan 1785

Kinematics and Dynamics Simulation of Key Components of Wind Turbine

Z.X. Liu, G.H. Zhang, B. Wang, X.W. Zhang, T.B. Yu and W.S. Wang 1790

Preparation of Porous Silicon and Effect of Gettering on the Resistivity

S.X. Guo, Y. Tan, J.Y. Li, Y.Q. Li and C.G. Liu 1794

Silicon Wafer Microstructure Fabrication Using Nanosecond Laser Pulses

D.F. Xu, S.Q. Yin, Z.G. Xiao and X. Xiao 1798

Development of Solid Oxide Electrolyzer Cell (SOEC) Cathode Materials

X.G. Cao and H.Y. Zhang 1802

Characterization and Preparation of Well-Dispersed Ti02 Nanoparticles by Ultrasonic

Microemulsion Method

B.Y. Jiang, F.M. Feng, C. Li, M. Wang and J.Q. Xie 1806

High-Temperature C02 Capture Using MgO/y-A^Oj Materials as Adsorbent

X. Fu 1811

Preparation of Large Size Pyramidal Texture on N-Type Monocrystalline Silicon Using TMAH

Solution for Heterojunction Solar Cells

J.W. Chen, L. Zhao, S. Zhou, H.W. Diao, Y.H. Tang, B.J. Yan and W.J. Wang 1815

Preparation and Luminescence Characteristics of Li2Y4.xEux(W04)7 Red-Emitting PhosphorJ.J. Ru, J. Guo, W.K. Luo, N. Ye and Y.C. Xiao 1820

Membrane Potentials across the Cation Exchange Membrane in Aqueous Mixed

Electrolyte Solutions

D.C. Liu andY.P. Zhang 1825

Preparation and Performance of Gypsum Matrix Phase Change Energy-Storage Material

Q.J. LiandG.Z. Li 1829

Design and Implementation ofAssembly Resources Management System Based on Knowledge

D.W. Wu, E.Y. Zheng and B.R. Du 1833

A Simple Hydrothermal Process Based on FeP04«2H20 to Synthesize Spherical LiFeP04/C

Cathode Material

W.Q. Wang, J.J. Hao, Z.M. Guo and Q. Ye 1837

A Study on Anti-Collision RFID Algorithm Based on Interval Estimate Method

Z.G. Cheng, S.X. Chen and G.N. Chen 1841

Chapter 9: Environmental Friendly Materials

Removal of Copper-Cyanide Complexes from Electroplating Industry Effluents by Ion-

Exchange Fiber

Z.Q. Cao, M.Y. Li, Y.R. Sun and Q.X. Zeng 1847

Research Advances of Element-Doped Nanocrystalline Titanium Dioxide Thin Films

B. Zhang, F. Wen and Y. Cao 1851

cvi New Materials and Processes

The Study of Sodium Alginate Adsorption with PAE as Environmental Friendly Additive for

Paper StrengthX.L. Song, C.L. Yao and X.J. Jin 1855

Preparation and Adsorption Property of Modified Activated Carbon for Purification of HCN in

Closed Carbide Furnace Tail Gas

M. Jiang, P. Ning, Z.H. Wang, Y.W. Bai, W. Chen, W. Zhang and R.B. Wang 1862

Locally Adjusting Operation on Concave Vertexes of Planar PolygonH.B. Wang, W.J. Liu and H.Y. Bian 1867

Study on Division ofNatural Bamboo Fibers by Steam ExplosionY.S. Zhang, J.X. Xie and Y.C. Jiang 1873

Analysis and Prevention of Pulling Inhibition and Stagnation of Slab Casters

Y.F. Wang, Z.Z. Yang, J.P. Rao, J. Cheng, Z.G. Peng and X. Hong 1877

Effect of Calcination Temperature on the Photocatalytic Activity of Spiel Zn2Sn04

K.L. Zhang, R.J. Zhao, Q.K. Lei and Y.C. Hu 1882

Effect of Thermal Modification on the Physical Properties ofPopulus ussuriensis

D, Xing, M. Xu, J.T. Shi and J. Li 1889

Application of Fuzzy Statistical Analysis to Middle School Students' Perceptions on

School Climate

H.M. Huang 1893

Dissolution of Cellulose and Synthesis of Cellulose-Graft-Poly (L-Lactide) via Ring-OpeningPolymerization in an Ionic Liquid

S.Xiao, L. Dai and J. He 1897

Preparation of PLA/Nano-ZnO CompositesH.J. Zheng, Z.W. Zhao, Y.L. Liu, X.F. Zhao and K.H. Xi 1901

Analysis on Mechanical Properties of Lotus Fibers

X.H. Yuan, Y.J. Gan, D.S. Chen and Y.J. Ye 1905

Photocatalytic Degradation ofMethylene Blue Using Nano-ZnO at Air Lift Circulating Reactor

H. Xu, M. LiandJ.K. Wang 1910

High Performance Iron-Rich Magnesia-Spinel Composite for Burning Zone of Cement

Rotary Kiln

G.X. Yin, Y. Li, J.H. Chen and B. Pan 1915

A Study on the Liquid Mulching Film of LigninZ. Wang, J.W. Xue and W.X. Liu 1920

Study on the Photocatalytic Degradation of Diesel Pollutants over a Sol-Gel Prepared Ti02X.C. Yu, D.D. Hu, Q. Du, X. Zheng and J.Y. Guo 1926

Physical and Mechanical Properties of Inorganic Particles Filled Individual Bamboo Fibers

J. Gao, G. Wang, H.T. Cheng and S.Q. Shi 1930

Study on the Correlation between the Property of Akund Fiber and its Growing ConditionsX. Yang, L.D. Cheng, L.Q. Huang and W.H. Fan 1934

Study on the Photocatalytic Degradation of Diesel Pollutants in Seawater by a SonochemicallyPrepared Nano Zinc Oxide

D.D. Hu, X.C. Yu, M. Zhang, J.Y. Guo and X. Zheng 1939

Study on Carding Processing Length ofAkund

Q. Wang, L.D. Cheng, X. Jiang and E. Stojanovska 1943

Research on Structure and Properties of Lotus FibersD.S. Chen, Y.J. Gan and X.H. Yuan 1948

Efficient Destruction of Chlorophenols by Ultraviolet Irradiation

X.C. Li, J. Ma and S.Y. Yue 1955

Study on Compression Behaviour of AZ3I Magnesium Alloy at Room-TemperatureJ.L. Sun, R.C. Li, G.F. Quan and Z.M. Liu 1960

Advanced Materials Research Vols. 476-478 cvii

Adsorption of As (v) from Water by Activated Aluminum Oxide

D.L. Zhang, F. Qiao, M. Lv, Y.J. Sun and Q.Y. Guo 1965

One-Pot Synthesis ofMesoporous MCM-41 with Different Functionalization Levels and their

Adsorption Abilities to PhosphateW.Y. Huang, J. Yang and Y.M. Zhang 1969

Research on Special Cement for the Concrete with Ultra-Fine Iron TailingsW.Y. Liu, S. Yan, Y.Y. An and H.J. Li 1974

Synthesis and Performance of NaA/MCM-48 Micro-Mcsoporous Composite Molecular Sieve

J.M.Pan, Y.Cheng and Y.Y. Wei 1979

Optimal Design of Rotation Shaft Torque Testing SystemY.Q.Jin and Y.L. Zang 1987

The Wear Mechanism Comparison between MgO-Based Chrome-Free Brick and MgO-Cr203Brick in the Lower Part of RH Vacuum Degasser

G.X. Yin, Y. Li, J.H. Chen and X.K. Gao 1991

Synthesis and Application of Water-Borne Nontoxic Emulsion from Wasted Polystyrene FoamX.W. Kong and X.D. Fan 1997

Study on the Photocatalytic Degradation of Ammonia Nitrogen in Aquaculture Wastewater by

Fe3+-Doped Nano-Ti02 under UV Irradiation

X.C. Yu, P.F. Zhu, K.S. Song, D.D. Hu and Q. Du 2001

Preparation of Visible Light Response K6SiWn039Sn" for Photocatalytic Degradation of Acid

Brilliant Scarlet

X.H. Zhu, J.H. Liu, L.L. Zhao and P.Y. Wang 2005

A Study on Engineering Properties of Self-Compacting Concrete Containing Waste LCD Glass

H.Y. Wang, T.T. Chen and C.S. Hsieh 2009

Relationship between Akund Fibers' Carding and Sliver QualityX. Jiang, L.D. Cheng, J.Y. Yu, Q. Wang, E. Stojanovska and S.W. Xu 2014

Chapter 10: Earthquake Materials and Design

Intelligent Job Shop Scheduling in Auto Blanking Plant

N.S. Cheng 2023

Clamping Deformation Analysis Research Based on a Flexible Clamping Fixture of Thin-

Walled Curved Surface Parts

L.G. Qu and H.B. Liu 2028

Remote Monitoring in Distributed Measurement System Using DataSocket JavaBean and

Java AppletJ.W. Li andB.Y. Ma 2032

Axial Compressive Experimental Study on Full-Scale Square Concrete Columns Confined by

High-Strength Spiral HoopsZ.B. Li, W.J. Wang, W.J. Zhang, Y.D. Shao, B. Zhang, M.G. Fan and S.P. Lin 2036

Path Optimization in Hull Part Cutting Based on Seven Bridges Problems

J.J. Wu, Z.S. Ji and H.Q. Chang 2042

cviii New Materials and Processes

Chapter 11: Biomaterials

The Effects ot'adhE Deletion on the Metabolism for D-Lactic Acid Production by the

Escherichia coli JH11

J.F. Zhao, L.Y. Xu, Y.Z. Wang, J.H. Wang and S.D. Zhou 2051

Preparation and Characterization of a Bio-Composites Scaffold Containing Nano-

Hydroxyapatite /Carboxymethyl Chitosan

Z.H. Lu, D.M. Zhao and K.N. Sun 2055

Preparation of Borosilicate Xerogel and Research on its Mineralization

C. Wang, Y.D. Li and G.Q. Ding 2059

Fabrication Methods of Porous Tantalum Metal Implants for Use as Biomaterials

CJ. Chen and M. Zhang 2063

Study on Chain Extension and Modification of ?o\y(Lactic Acid) by IsophoroneDiisocyanate /Polyethylene Glycol

Z. Zhang, G.D. Fan and H.Y. Yang 2067

Reinforcement of Hydrogen Peroxide Bleaching of Bamboo Pulp

P.Y. Li, M.Y. Zhang, X.X. Xia and C.T. Lin 2071

Synthesis and Characterization of a Biodegradable Poly (Glycerol-glycol-sebacate) TerpolymerL.L. Liu, F.C. Yi and W. Cai 2075

Simulation Analysis of Drive System ofWind Turbine Gearboxes

Z.X. Liu, F.K. Chen, B. Wang, G.D. Zhou, T.B. Yu and W.S. Wang 2079

Effects of Water Vapor on the Oxidation Behaviors of Cr-Al-N CoatingsM. Zhu and Z.H. Wang 2083

Effects of Vacuum Infusion on Dried Nata Rehydration Ratio

Y.J. Long, C.F. Li, M.H. Yu and S.X. Liu 2087

An Optimized Dynamic Join Query Method for Multi-Hop Wireless Sensor Networks

M.S. Ge, C.Y. Fu, X.L. Tai and J.P. Guo 2091

Trapping Yeast Cells on PDMS Micropillar ArrayW. Zhang, B. Zhang, Y.L. Zhang, D. Han and Y.L. Zhou 2096

Preparation and Properties of Pullulan Composite Films

J.J. Yan, Z. Li, J.F. Zhang and C.S. Qiao 2100

Effect of Inter-Rod Coupling on 1-3 Piezocomposite High-Power Ultrasonic Transducers

Y.L. Lin, G.S. Chen, H.C. Liu and Y.C. Lin 2105

Structural Characteristics of a New Original Bamboo Structure Composite Boards

C. He, J.Y. Wang, L.F. Zhao and Y. Liu 2109

Influence of the 2,2-Dimethylol Propionic Acid Content on the Structure-Properties of

Waterborne PolyurcthaneZ.X. Wang, J.L. Wang and L.Z. Gu 2116

Chapter 12: Smart/Intelligent Materials/Intelligent Systems

Towards Web-Based Adaptive Learning Assistant ApproachH.Wang 2125

Using Mahalanobis Clustering Algorithm for College Student LearningFundamental Mathematics

C.C. Chen 2129

Advanced Materials Research Vols. 476-478 cix

The Application of Infrared Sensors Integrating Stepper Motor Based on C8051F120

Z.H. Xin, L.Y. Hu and H. Li 2133

Research on Teaching Strategy Based on Individual Requirements under

E-Learning Environment

H.Wang 2137

Synthesis and Shape Memory Effect of Vo\y(Glycerol-Sebacate) Elastomer

L.L. Liu, F.C. Yiand W. Cai 2141

Rcserach on the Feeding Model and Residual Error Model of a New Polishing Device

Y.C. Li, J.Q. Lin, M.M. Lu and F. Li 2145

Rheological Behaviors of Polyacrylonitrile Melt Using Ionic Liquids as a Plasticizer

Y.C. Tian, K.Q. Han, H.L. Qin, H.P. Rong, B. Yan, D. Wang, S.P. Liu and M.H. Yu 2151

Formation Mechanism and Simulation Research on Innovation Clusters

F. Q. Wu 2158

Shape Memory Effect Improvement and Study of the Corrosion Resistance ofthe

Fe-8Mn-6Si-13Cr-6Ni-12Co AlloyA. Charfi, F. Gamaoun, T. Bouraoui, C. Bradai and B. Normand 2162

Chapter 13: Polymeric Materials

Microstructure Study on Optimization of High Strength Fly Ash Based GeopolymerA.M.M. Al Bakri, H. Kamarudin, M. Binhussain, I. Khairul Nizar, A.R. Razak and Y. Zarina 2173

Influence of Three Diffusion Paths on the Pump Signal in Zr02-Based NOx Sensor

H.Q. Huang, G.Y. Xie, Y.M. Gao and Y.J. Pan 2181

The Study on the Reverse Atom Transfer Radical Polymerization of MMA Catalyzed by

Acetylacetonate Cobolt(II) Complex Supported by Ionic LiquidJ. Cai, T. Chen, G.Z. Wang, J. Gao, R. Ma and C.J. Yan 2188

Slice Spectrum of AR Trispectrum for the Fault Diagnosis of the Hydraulic Control Valves

B. S. Chen, J.B. Jiang and C.Y. Li 2193

In Situ FT-IR Studies on the Catalytic Reaction of Isophorone Diisocyanatc with Benzyl Alcohol

P.F. Yang 2197

Electronic Effect of Fluoro Substituents on Chromium(III) Complexes bearing p-Diketiminate

Ligands for Ethylene PolymerizationG.Y. Xie, X. Zhang, X.H. Xu, T.C. Li and A.Q. Zhang 2201

Preparation of Highly Conductive Polyaniline in Carbamide Aqueous Solution Using

SnCLi as Initiator

G. N. Lin, Q. Yu, W. Wang and G.B. Wang 2205

Theoretical and Experimental Study on the Crimp Mechanism of Bi-Component Filament

Y. Fang, C.H. Wang, H.F. Liang, L.L. Bao and X.H. Zhou 2209

Study on the Relationship between Nominal Filtration Accuracy and Absolute Filtration

Accuracy of the Automobile Engine Oil Filter Materials

J.Y. Feng, J.C. Zhang, H. Zhang and D.X. Yang 2213

Real-Time Monitoring Device and Method of the Compression Stress of Rubber Materials

M.Y. Yang, W.F. Zhang, Y. Chen, L. Zhao and M.L. Ding 2219

In Situ FTIR Spectroscopy Study on the Crystallization Process of Isotactic Polypropylene in

Isotactic Polypropylene/Polyethylene-Glycol Blends

X.Y. Li, L. Yang and D.C. Liu 2223

The Two-Stage Curing Method for Shape-Memory Materials

H. Sun, Y.Y. Liu, H.F. Tan and C.G. Wang 2227

cx New Materials and Processes

Effect of Shear Intensity on Structure and Properties of PA1010/CaCl2 CompositesS.J. Lu, H.H. Gan, M. He, Z. Hu and J. Yu 2231

Biosorption of Food Dye onto Gelatin Microspheres: Equilibrium Isotherm and

Thermodynamic AnalysisH.Y. Xue, F. Han and B.Y. He 2239

Relationship between Sequence Length and Thermal Properties of Poly(ethylene Terephthalate-

Co-4,4'-Bibenzoate) (PETBB)J.M. Jiang, J.M. Dai, S.L. Yang and G. Li 2243

Preparation of Sealing Gasket Resistant to High Temperature and Conducting Oil

M. Tian and Q. Qiao 2248

The Formation Mechanism of CH, on Nitrile Butadience Rubber in Transformer Oil

S. Zhang, L.W. Tang, M.R. Sun, F. Hu, C.H. Zhang and Y.H. Miao 2252

Synthesis of Star Cationic Polyacrylamide and its Application in the Retention and DrainageSystem ofPapermaking

Y.Y. Shan, Y.J. Fu and M.H. Qin 2256

NBR's Storage Life Prediction Based on the Accelerated Life Test

L. Zhao, W.F. Zhang, Y. Chen, M.L. Ding and M.Y. Yang 2260

Test on Indoor Thermal Environment of Haidong Region in Qinghai Province China in Winter

X.P. Zhao, Y. Liu and M.Z. Gao 2266

Radial Orientation Mechanism and Research of Short Fiber in Extrusion Die

C.J. Liu 2271

Effect ofGamma Irradiation Crosslinking on PA6 Fibers

S.F. Zhu, M.W. Shi and G.L. Dai 2280

Application as Papermaking Organic Particulate Retention Agent of Cationic PolymethylAcrylate Emulsion in Bleached Wheat Straw Pulp

Y.S. Ma, L.T. Wang, X.H. Sun, Y.F. Chen and Z. Liu 2284

Preparation and Characterization of a Novel Mixed Functional Cationic Exchange CopolymerMicrosphere as Drug Carrier

K. Wongsermsin, P. Opanasopit, T. Ngawhirunpat and P. Akkaramongkolporn 2288

Theory Study for Moving Force Identification

Z. Chen 2292

Adsorption of Food Dye onto Gelatin Microspheres: pH Effect in Kinetics and Mechanism

H.Y. Xue, F. Han and B.Y. He 2296

Morphologies and Properties of Epoxy Resin-Low Molecular Weight Polyamide Curing SystemModified with Expanded Graphite

G.X. Hou, S.W. Yao, X.M. Sang and S.W. Yu 2300

An High-Performance Water-Based Drilling Fluid and its ApplicationK.H. Lv, X.D. Wu, T. Shi, K.L. Ren and Y.X. Liu 2304

Synthesis, Characterization, and Flocculation Properties of Branched PolyacrylamideW.M. Sun, G.C. Zhang, H.L. Li, D.D. Li, P.P. Li, B.C. Liu, D. Zhang, X. Lei and Q.R. Zhao 2311

Preparation and Uranium Sorption Performance of Amidoximated

Polyacrylonitrile/Organobentonite Nano CompositeJ.N. Shen, J. Yu, Y.X. Chu, Y. Zhou and W.J. Chen 2317

Effect ofCarbon Fiber Reinforcement on the Mechanical and Tribological Properties of

PA6/PPS CompositesS.F. Zhou, C.Q. Wu, L.H. Chen and Q.X. Zhang 2323

Study on Synthesis ofCationic Polymethyl Acrylate EmulsionY.S. Ma, L.T. Wang, X.H. Sun, Y.F. Chen, Z.F. Dou and G.Q. Lu 2328

Advanced Materials Research Vols. 476-478 cxi

Chapter 14: Thin Films

Soft Magnetic Property of [Fe8oNi2rO/ZnO)n Multilayer Thin Films for

High-Frequency ApplicationY. Wang, H. Geng, S.J. Nie, J.Q. Wei, L.S. Wang, G.H. Yue, Y.Z. Chen and D.L. Peng 2335

Analysis of Wet Etching Characteristics of a-IGZO Thin Film

L.L. Chen, X.F. Li, J.F. Shi, H. Zhang, C.Y. Li and J.H. Zhang 2339

Effects ofSubstrate Bias on the Microstructurc and Properties of a-C:H Films

Deposited by MFPUMST

H.Y. Dai, F.X. Zhai, X.R. Cheng, L. Su and Z.P. Chen 2344

Preparation and Characterization of Electrospun Poly (3, 3'S, 5'-Tetramethyl-4, 4'-

Diaminodiphenyl-Butyltoluene-Co- 3, 3', 4, 4'-Biphenyltetracarboxylicdianhydridc)Nanofiber Membranes

Y. Peng, J.H. Jin, S.L. Yang and G. Li 2348

Effect of Deposition Temperature on Surface Roughness of Nanocrystallinc Diamond Film

W.Q. Dai, L.J. Wang, J. Huang, Y.F. Liu, K. Tang and Y.B. Xia 2353

Effects of Pulsed Negative Bias and Current Density on Properties of N-Doped TiO* Films

Deposited by Arc Ion Plating

S.J. Zhang, M.S. Li, Z.Q. Chen and Y.Z. Fan 2357

Preparation of Ultra-High Molecular Weight Polyethylene Microporous Membranes via

Thermally Induced Phase SeparationL.L. Zhu, Z.M. Hu, J.R. Yu, G.P. Tang, L. Chen and J. Zhu 2363

Microstructure and Properties of Laser Clad Nonmagnetic WC-FeNiCr Metal-Matrix

Composite CoatingJ.X. Yang, X.H. Miao and F.L. Liu 2368

First-Principles Study of Electronic Structure of V-Si-N Nanocomposite Thin Film

H.L. Jia, Z.X. Li and XJ. Liu 2374

Research on the Experiment ofZnO Thin Film by Pulsed Laser Deposition

Q. Ke, Y.F. Wang and J.J. Hu 2379

A Method of Fault Detection and Diagnosis for Electromagnetic Direction Valve Based on

Artificial Neural Network

M.Q. Dai, W. Cai and S.D. Zhao 2384

Post-Processing and Properties of Polyethersulfone Hollow Fiber Membrane

P. Lan, W. Wang and J.D. Cao 2389

Study on the Tensile Fracture Characteristics of Cars Oil Filter Materials

J.Y. Feng, J.C. Zhang and H. Zhang 2393

Preparation and Characterization of Ti02 Photocatalytic Thin Film Prepared bySol-Gel Dip Coating

J.J. Wang, K. Zheng, C. RUssel and W. Liang 2398

Effects of Ce Doping on the Properties ofZnO Thin Films Prepared by DC Reactive

Magnetron Sputtering

Q. Luo, L.S. Wang, Z.W. Wang, Y.Z. Chen, G.H. Yue and D.L. Peng 2403

The Characterization ofTi02 Films Prepared by PyrolysisX.T. Hu, B. Xie and S.H. Zhang 2407

Wuxi Hui-Quan Substation Three-Dimensional Modeling and CIS System Implementation

Q.L. LiuandW.S. Hu 2411

Buffer Layer Effects on the Structure and Morphology of SmCo/Cu Thin Films

Q.P. Zhang, Q.Q. Fang, W.N. Wang, Q.R. Lv, Y.M. Liu and H.M.Zhang 2415

cxii New Materials and Processes

Preparation and Mechanical Characterization of Nanocrystalline Diamond Films on Aluminum

Oxide Substrates

X.Q. Meng, W.J, Fu, B. Wang and C.T. Yang 2419

Chapter 15: Mechanical Behavior & Fracture

An Integrated Evaluative Function and Water Bloom Predicting and Prewarning SystemZ.W. Liu, X.Y. Wang and Q.M. Wu 2427

Grey Relational Grade Analysis between Vickers Hardness and Fatigue Crack Growth Data of

2024-T351 Aluminum AlloyC.C. Ni 2435

Studies of Ti-15V-3Cr-3Al-3Sn after Thermohydrogen ProcessingR.T. Huang, P.C. Tsay and W.H. Chen 2440

A Fractal Study on Collective Evolution of Short Fatigue Cracks under Various

Strain AmplitudesZ. Wang, W.Y. Xie, L. Wang and J.X. Liu 2444

Effect of Energy Input of Welding Thermal Cycles on the Cryogenic Toughness of the CGHAZ

in Steel 9Ni

D. J. Wang, L.G. Liu, Y.H. Wang, X.Q. Zhao, W.J. Liu and Q.F. Wang 2449

An Investigation on the Shear Toughness for Sn/3.0Ag/0.5Cu and Sn/37Pb Solder Ball Joints

CM. Hsu, T.P. Hung, A.D. Lin and J.H. Kuang 2455

Size Effects on Biaxially Compressed Stability ofTriaxial Weave Fabric CompositesN. Rasin, A.B.H. Kueh, M.N.H. Mahat and A.Y. Mohd Yassin 2459

Study on Mechanism of L-Shaped Concrete-Filled Steel Tubular Columns Subjected to

Axial CompressionJ.C. Zhang and J. Yang 2463

Effect of Y and Zn Substitution on Tensile Properties of 6H-Type LPSO Phase in

Mg^Zn^i AlloyP.Y. Tang, B.Y. Tang, L.M. Peng and W.J. Ding 246V)

Hardness of Rapidly Solidified Al-High Si AlloysF. Alshmri and H.V. Atkinson 2476

In-Plane Crushing of Triangular Honeycomb Cores, Part II: Under Dynamic Loadings

D.Q. Sun, Y.F. Guo and R.H. Xia 2481

An Investigation to Added Mass Force on the Wing of Insect Inspired from a RigidSphere Model

M.J. Hu, X.Y. Yan and J.Y. Yan 2485

GIS-Based Environmental Sensitivity Evaluation for Supporting Scenic Area Planning: Case

Study of Lushan-Xihai International Art Park

Z. Yang, W.X. Xin and Y. Li 2489

Correlation between NDT and Tensile Strength of Structural Larch Sawn Lumber

Y. Chen, W.N. Li, X.J. Wang and S.J. Shen 2496

In-Plane Crushing of Triangular Honeycomb Cores, Part I: Under Quasi-Static LoadingsD.Q. Sun, Y.F. Guo and G.T. Xu 2501

Mechanical Analysis for Laying Thermal Insulation PipeJ.H. Chen, M.L. Duan and J. Zhang 2505

Numerical Analysis ofThermally-Induced Residual Stresses in Beryllium Caused by BcOJ. Mao, L.J. He and D.M. Xu 2510

Nonlinear Stability Analysis for FGM Shallow Conical Shells Subjected to Thermal and

Mechanical United Loads

J.C. Xu, C. Deng and H. Wang 2515

Advanced Materials Research Vols. 476-478 cxiii

First-Principles Study on the Ideal Strengths of Typical Hep Metals

L. Fu, Q. Zhang and B.Y. Tang 2523

The Influence of Pore Defects Distribution Characteristic on Casting Service Performance and

Fatigue Life

L. Rao, L.B. Zhu, Q.Y. Hu and X.L. Li 2530

Mechanical Properties of High Strength Concrete Filled Steel Tubular Columns Part 2: Slender

Columns and Eccentrically Loaded Columns

L.B. Liu, K.F. Tan and H.L. Yu 2534

Failure Prediction of Laminated Composites with the Hole under in-Plane Compressive Loading

Y.H.Yang 2539

Numerical Simulation for Mechanical Behavior of Carbon Black Filled Rubber CompositesBased on Plane Stress Model

Q. Li and X.X.Yang 2543

Three-Dimensional Elastic-Plastic Constraint Analysis for Side Crack Tension SpecimenZ.X. Wang and G.C. Jiao 2548

Reliability Design for Allowable Stress of Creep Rupture Strength of 4Cr25Ni3S Steel

IB. Pei, Y.F. Zhao, S.P. Yu and J. Zhao 2552

The Two Dimensions Analysis of Localzation Bandwidth in Material Distortion

T.J. Dong and O. Cheng 2556

Simulation of First Mode Crack Propagation in a Viscoelastic Solid System Fuel Structure

Using Crack Length-Temperature SuperimpositionM. Omair, K. Parvez and M. Azam 2561

Design for Manufacture and Integrated Manufacturability Evaluation System

H.J. Liu, X.Y. Tong, S.L. Lv and Q.M. Fan 2567

Microstructure and Mechanical Characteristics of the CrN/Si3N4 Multilaycred Films

Prepared by SputteringC.C. Liu, K.I. Liu, H.T. Lin and Y.M. Cheng 2571

Chapter 16: Tooling Testing and Evaluation of Materials

Analysis on Test Method of Metal Magnetic Memory Mechanism of Ferromagnetic Materials

Based Plastic Deformation

R.B. Gou and Y.L. Zhang 2577

Damage Evaluation of Supercritical C02 for Hydronibrile Nitrile(HNBR)X.L. Yang, F. Wang, Q. Li, D.P. Zhang, D.Z. Zeng, H.J. Zhu, Y.H. Lin and S.O. Li 2582

The Application of Multiaxial Fabric Blower Blade and its Strength Theory Check

Z.Y. Wu and C.F. Zhang 2586

Application of Ultrasonic Guided Wave Method for Flaw Detection in Coal-Fired Power Plants

S.T. Li, U.S. Cai and J. Yang 2590

Monitoring and Characterization of Chemical Shrinkage during Curing in a RTM Resin

X.Q. Li, Z.L. Zhang and X.S. Yi 2594

Failure Analysis of Hard Alloy Roll Rings and their Repairing TechnologyL.R. Huang, F.F. Liu and Y.H. Chen 25W

Characterization of Wafer Surface Topography after CMP

R. Wang, J. Wang, M. Sun, B.H. Gao, R.X. Yang and Y.L. Liu 2603

The Deduction and Application of Correction Formulas of Three-Dimensional Residual Stress

with Layer Stripping MethodH.R. Huang and X.Y. Li 2608

cxiv New Materials and Processes

Equilibrium Automatic Wind Door and Electronic Control SystemG.Z. Cheng, H.F. Lin and Y.T. Zheng 2613

Spectroscopy Methods in Analysis of Mineral CompositionT. He 2617

Preparation and Activity of Ionic Liquid Catalysts Grafted on Hydrophobic Silica Gel

X.L. Zhang and D.F. Wang 2621

Analysis of Volatile Organic Compounds in Disposable Food Packages at Three

Types of TemperatureL. Xie, J. Yu, S. Li and S.S. Diao 2625

An Improved Standard Addition Method for Material Components AnalysisR.B. Ning, S.N. Xu and Q. Li 2630

Study on Behavior of Geosynthetic Reinforcement in GRPS Embankment

L. Yan and J.S. Yang 2634

Keyword Index 2639

Author Index 2657