New Materials and Processes
PART 3
Selected, peer reviewed papers from the
3rd International Conference on
Manufacturing Science and Engineering(ICMSE 2012),
March 27-29, 2012, Xiamen, China
Edited by
Wenzhe Chen, Qiang Li, Yonglu Chen,
Pinqiang Dai and Zhengyi Jiang
civ New Materials and Processes
PART 3
Chapter 8: New Energy Materials
The Research of Electrolyte on Lithium/Sulfur BatteryM.S. Zheng, J.J. Chen and Q.F. Dong 1763
Inkjet Printing Technology for Dye-Sensitized Solar Cells
Y.L. Lin, C.Y. Hsu and C.L. Tai 1767
Advanced Materials Research Vols. 476-478 cv
Investigation on the Electrochemical Cycle Stability of La-Mg-Ni-based A2B7-type AlloysPrepared by Melt Spinning
Y.H. Zhang, T. Yang, Z.H. Hou, G.F. Zhang, Y. Cai and D.L. Zhao 1771
Study on High Quality Polycrystalline Silicon p/n Films Fabrication throughRecrystallization by RTP
L.W. Zhang, X.L. Mei, J.X. Lu, R. Zhang, S.Y. Chu and ST. Wen 1776
Research on the Influence of Electron Beam Parameters on Molten Pool Morphologies duringElectron Beam Melting Silicon
F.M. Xu, Z. Gu, S. Shi, Y. Tan, D.C. Jiang and W. Dong 1781
Applicability of Gdo..jCa<uAI03.s Ceramic Electrolyte for Intermediate Temperature Solid
Oxide Fuel Cells
G.H. Liu, F. Wang and R.Q. Yan 1785
Kinematics and Dynamics Simulation of Key Components of Wind Turbine
Z.X. Liu, G.H. Zhang, B. Wang, X.W. Zhang, T.B. Yu and W.S. Wang 1790
Preparation of Porous Silicon and Effect of Gettering on the Resistivity
S.X. Guo, Y. Tan, J.Y. Li, Y.Q. Li and C.G. Liu 1794
Silicon Wafer Microstructure Fabrication Using Nanosecond Laser Pulses
D.F. Xu, S.Q. Yin, Z.G. Xiao and X. Xiao 1798
Development of Solid Oxide Electrolyzer Cell (SOEC) Cathode Materials
X.G. Cao and H.Y. Zhang 1802
Characterization and Preparation of Well-Dispersed Ti02 Nanoparticles by Ultrasonic
Microemulsion Method
B.Y. Jiang, F.M. Feng, C. Li, M. Wang and J.Q. Xie 1806
High-Temperature C02 Capture Using MgO/y-A^Oj Materials as Adsorbent
X. Fu 1811
Preparation of Large Size Pyramidal Texture on N-Type Monocrystalline Silicon Using TMAH
Solution for Heterojunction Solar Cells
J.W. Chen, L. Zhao, S. Zhou, H.W. Diao, Y.H. Tang, B.J. Yan and W.J. Wang 1815
Preparation and Luminescence Characteristics of Li2Y4.xEux(W04)7 Red-Emitting PhosphorJ.J. Ru, J. Guo, W.K. Luo, N. Ye and Y.C. Xiao 1820
Membrane Potentials across the Cation Exchange Membrane in Aqueous Mixed
Electrolyte Solutions
D.C. Liu andY.P. Zhang 1825
Preparation and Performance of Gypsum Matrix Phase Change Energy-Storage Material
Q.J. LiandG.Z. Li 1829
Design and Implementation ofAssembly Resources Management System Based on Knowledge
D.W. Wu, E.Y. Zheng and B.R. Du 1833
A Simple Hydrothermal Process Based on FeP04«2H20 to Synthesize Spherical LiFeP04/C
Cathode Material
W.Q. Wang, J.J. Hao, Z.M. Guo and Q. Ye 1837
A Study on Anti-Collision RFID Algorithm Based on Interval Estimate Method
Z.G. Cheng, S.X. Chen and G.N. Chen 1841
Chapter 9: Environmental Friendly Materials
Removal of Copper-Cyanide Complexes from Electroplating Industry Effluents by Ion-
Exchange Fiber
Z.Q. Cao, M.Y. Li, Y.R. Sun and Q.X. Zeng 1847
Research Advances of Element-Doped Nanocrystalline Titanium Dioxide Thin Films
B. Zhang, F. Wen and Y. Cao 1851
cvi New Materials and Processes
The Study of Sodium Alginate Adsorption with PAE as Environmental Friendly Additive for
Paper StrengthX.L. Song, C.L. Yao and X.J. Jin 1855
Preparation and Adsorption Property of Modified Activated Carbon for Purification of HCN in
Closed Carbide Furnace Tail Gas
M. Jiang, P. Ning, Z.H. Wang, Y.W. Bai, W. Chen, W. Zhang and R.B. Wang 1862
Locally Adjusting Operation on Concave Vertexes of Planar PolygonH.B. Wang, W.J. Liu and H.Y. Bian 1867
Study on Division ofNatural Bamboo Fibers by Steam ExplosionY.S. Zhang, J.X. Xie and Y.C. Jiang 1873
Analysis and Prevention of Pulling Inhibition and Stagnation of Slab Casters
Y.F. Wang, Z.Z. Yang, J.P. Rao, J. Cheng, Z.G. Peng and X. Hong 1877
Effect of Calcination Temperature on the Photocatalytic Activity of Spiel Zn2Sn04
K.L. Zhang, R.J. Zhao, Q.K. Lei and Y.C. Hu 1882
Effect of Thermal Modification on the Physical Properties ofPopulus ussuriensis
D, Xing, M. Xu, J.T. Shi and J. Li 1889
Application of Fuzzy Statistical Analysis to Middle School Students' Perceptions on
School Climate
H.M. Huang 1893
Dissolution of Cellulose and Synthesis of Cellulose-Graft-Poly (L-Lactide) via Ring-OpeningPolymerization in an Ionic Liquid
S.Xiao, L. Dai and J. He 1897
Preparation of PLA/Nano-ZnO CompositesH.J. Zheng, Z.W. Zhao, Y.L. Liu, X.F. Zhao and K.H. Xi 1901
Analysis on Mechanical Properties of Lotus Fibers
X.H. Yuan, Y.J. Gan, D.S. Chen and Y.J. Ye 1905
Photocatalytic Degradation ofMethylene Blue Using Nano-ZnO at Air Lift Circulating Reactor
H. Xu, M. LiandJ.K. Wang 1910
High Performance Iron-Rich Magnesia-Spinel Composite for Burning Zone of Cement
Rotary Kiln
G.X. Yin, Y. Li, J.H. Chen and B. Pan 1915
A Study on the Liquid Mulching Film of LigninZ. Wang, J.W. Xue and W.X. Liu 1920
Study on the Photocatalytic Degradation of Diesel Pollutants over a Sol-Gel Prepared Ti02X.C. Yu, D.D. Hu, Q. Du, X. Zheng and J.Y. Guo 1926
Physical and Mechanical Properties of Inorganic Particles Filled Individual Bamboo Fibers
J. Gao, G. Wang, H.T. Cheng and S.Q. Shi 1930
Study on the Correlation between the Property of Akund Fiber and its Growing ConditionsX. Yang, L.D. Cheng, L.Q. Huang and W.H. Fan 1934
Study on the Photocatalytic Degradation of Diesel Pollutants in Seawater by a SonochemicallyPrepared Nano Zinc Oxide
D.D. Hu, X.C. Yu, M. Zhang, J.Y. Guo and X. Zheng 1939
Study on Carding Processing Length ofAkund
Q. Wang, L.D. Cheng, X. Jiang and E. Stojanovska 1943
Research on Structure and Properties of Lotus FibersD.S. Chen, Y.J. Gan and X.H. Yuan 1948
Efficient Destruction of Chlorophenols by Ultraviolet Irradiation
X.C. Li, J. Ma and S.Y. Yue 1955
Study on Compression Behaviour of AZ3I Magnesium Alloy at Room-TemperatureJ.L. Sun, R.C. Li, G.F. Quan and Z.M. Liu 1960
Advanced Materials Research Vols. 476-478 cvii
Adsorption of As (v) from Water by Activated Aluminum Oxide
D.L. Zhang, F. Qiao, M. Lv, Y.J. Sun and Q.Y. Guo 1965
One-Pot Synthesis ofMesoporous MCM-41 with Different Functionalization Levels and their
Adsorption Abilities to PhosphateW.Y. Huang, J. Yang and Y.M. Zhang 1969
Research on Special Cement for the Concrete with Ultra-Fine Iron TailingsW.Y. Liu, S. Yan, Y.Y. An and H.J. Li 1974
Synthesis and Performance of NaA/MCM-48 Micro-Mcsoporous Composite Molecular Sieve
J.M.Pan, Y.Cheng and Y.Y. Wei 1979
Optimal Design of Rotation Shaft Torque Testing SystemY.Q.Jin and Y.L. Zang 1987
The Wear Mechanism Comparison between MgO-Based Chrome-Free Brick and MgO-Cr203Brick in the Lower Part of RH Vacuum Degasser
G.X. Yin, Y. Li, J.H. Chen and X.K. Gao 1991
Synthesis and Application of Water-Borne Nontoxic Emulsion from Wasted Polystyrene FoamX.W. Kong and X.D. Fan 1997
Study on the Photocatalytic Degradation of Ammonia Nitrogen in Aquaculture Wastewater by
Fe3+-Doped Nano-Ti02 under UV Irradiation
X.C. Yu, P.F. Zhu, K.S. Song, D.D. Hu and Q. Du 2001
Preparation of Visible Light Response K6SiWn039Sn" for Photocatalytic Degradation of Acid
Brilliant Scarlet
X.H. Zhu, J.H. Liu, L.L. Zhao and P.Y. Wang 2005
A Study on Engineering Properties of Self-Compacting Concrete Containing Waste LCD Glass
H.Y. Wang, T.T. Chen and C.S. Hsieh 2009
Relationship between Akund Fibers' Carding and Sliver QualityX. Jiang, L.D. Cheng, J.Y. Yu, Q. Wang, E. Stojanovska and S.W. Xu 2014
Chapter 10: Earthquake Materials and Design
Intelligent Job Shop Scheduling in Auto Blanking Plant
N.S. Cheng 2023
Clamping Deformation Analysis Research Based on a Flexible Clamping Fixture of Thin-
Walled Curved Surface Parts
L.G. Qu and H.B. Liu 2028
Remote Monitoring in Distributed Measurement System Using DataSocket JavaBean and
Java AppletJ.W. Li andB.Y. Ma 2032
Axial Compressive Experimental Study on Full-Scale Square Concrete Columns Confined by
High-Strength Spiral HoopsZ.B. Li, W.J. Wang, W.J. Zhang, Y.D. Shao, B. Zhang, M.G. Fan and S.P. Lin 2036
Path Optimization in Hull Part Cutting Based on Seven Bridges Problems
J.J. Wu, Z.S. Ji and H.Q. Chang 2042
cviii New Materials and Processes
Chapter 11: Biomaterials
The Effects ot'adhE Deletion on the Metabolism for D-Lactic Acid Production by the
Escherichia coli JH11
J.F. Zhao, L.Y. Xu, Y.Z. Wang, J.H. Wang and S.D. Zhou 2051
Preparation and Characterization of a Bio-Composites Scaffold Containing Nano-
Hydroxyapatite /Carboxymethyl Chitosan
Z.H. Lu, D.M. Zhao and K.N. Sun 2055
Preparation of Borosilicate Xerogel and Research on its Mineralization
C. Wang, Y.D. Li and G.Q. Ding 2059
Fabrication Methods of Porous Tantalum Metal Implants for Use as Biomaterials
CJ. Chen and M. Zhang 2063
Study on Chain Extension and Modification of ?o\y(Lactic Acid) by IsophoroneDiisocyanate /Polyethylene Glycol
Z. Zhang, G.D. Fan and H.Y. Yang 2067
Reinforcement of Hydrogen Peroxide Bleaching of Bamboo Pulp
P.Y. Li, M.Y. Zhang, X.X. Xia and C.T. Lin 2071
Synthesis and Characterization of a Biodegradable Poly (Glycerol-glycol-sebacate) TerpolymerL.L. Liu, F.C. Yi and W. Cai 2075
Simulation Analysis of Drive System ofWind Turbine Gearboxes
Z.X. Liu, F.K. Chen, B. Wang, G.D. Zhou, T.B. Yu and W.S. Wang 2079
Effects of Water Vapor on the Oxidation Behaviors of Cr-Al-N CoatingsM. Zhu and Z.H. Wang 2083
Effects of Vacuum Infusion on Dried Nata Rehydration Ratio
Y.J. Long, C.F. Li, M.H. Yu and S.X. Liu 2087
An Optimized Dynamic Join Query Method for Multi-Hop Wireless Sensor Networks
M.S. Ge, C.Y. Fu, X.L. Tai and J.P. Guo 2091
Trapping Yeast Cells on PDMS Micropillar ArrayW. Zhang, B. Zhang, Y.L. Zhang, D. Han and Y.L. Zhou 2096
Preparation and Properties of Pullulan Composite Films
J.J. Yan, Z. Li, J.F. Zhang and C.S. Qiao 2100
Effect of Inter-Rod Coupling on 1-3 Piezocomposite High-Power Ultrasonic Transducers
Y.L. Lin, G.S. Chen, H.C. Liu and Y.C. Lin 2105
Structural Characteristics of a New Original Bamboo Structure Composite Boards
C. He, J.Y. Wang, L.F. Zhao and Y. Liu 2109
Influence of the 2,2-Dimethylol Propionic Acid Content on the Structure-Properties of
Waterborne PolyurcthaneZ.X. Wang, J.L. Wang and L.Z. Gu 2116
Chapter 12: Smart/Intelligent Materials/Intelligent Systems
Towards Web-Based Adaptive Learning Assistant ApproachH.Wang 2125
Using Mahalanobis Clustering Algorithm for College Student LearningFundamental Mathematics
C.C. Chen 2129
Advanced Materials Research Vols. 476-478 cix
The Application of Infrared Sensors Integrating Stepper Motor Based on C8051F120
Z.H. Xin, L.Y. Hu and H. Li 2133
Research on Teaching Strategy Based on Individual Requirements under
E-Learning Environment
H.Wang 2137
Synthesis and Shape Memory Effect of Vo\y(Glycerol-Sebacate) Elastomer
L.L. Liu, F.C. Yiand W. Cai 2141
Rcserach on the Feeding Model and Residual Error Model of a New Polishing Device
Y.C. Li, J.Q. Lin, M.M. Lu and F. Li 2145
Rheological Behaviors of Polyacrylonitrile Melt Using Ionic Liquids as a Plasticizer
Y.C. Tian, K.Q. Han, H.L. Qin, H.P. Rong, B. Yan, D. Wang, S.P. Liu and M.H. Yu 2151
Formation Mechanism and Simulation Research on Innovation Clusters
F. Q. Wu 2158
Shape Memory Effect Improvement and Study of the Corrosion Resistance ofthe
Fe-8Mn-6Si-13Cr-6Ni-12Co AlloyA. Charfi, F. Gamaoun, T. Bouraoui, C. Bradai and B. Normand 2162
Chapter 13: Polymeric Materials
Microstructure Study on Optimization of High Strength Fly Ash Based GeopolymerA.M.M. Al Bakri, H. Kamarudin, M. Binhussain, I. Khairul Nizar, A.R. Razak and Y. Zarina 2173
Influence of Three Diffusion Paths on the Pump Signal in Zr02-Based NOx Sensor
H.Q. Huang, G.Y. Xie, Y.M. Gao and Y.J. Pan 2181
The Study on the Reverse Atom Transfer Radical Polymerization of MMA Catalyzed by
Acetylacetonate Cobolt(II) Complex Supported by Ionic LiquidJ. Cai, T. Chen, G.Z. Wang, J. Gao, R. Ma and C.J. Yan 2188
Slice Spectrum of AR Trispectrum for the Fault Diagnosis of the Hydraulic Control Valves
B. S. Chen, J.B. Jiang and C.Y. Li 2193
In Situ FT-IR Studies on the Catalytic Reaction of Isophorone Diisocyanatc with Benzyl Alcohol
P.F. Yang 2197
Electronic Effect of Fluoro Substituents on Chromium(III) Complexes bearing p-Diketiminate
Ligands for Ethylene PolymerizationG.Y. Xie, X. Zhang, X.H. Xu, T.C. Li and A.Q. Zhang 2201
Preparation of Highly Conductive Polyaniline in Carbamide Aqueous Solution Using
SnCLi as Initiator
G. N. Lin, Q. Yu, W. Wang and G.B. Wang 2205
Theoretical and Experimental Study on the Crimp Mechanism of Bi-Component Filament
Y. Fang, C.H. Wang, H.F. Liang, L.L. Bao and X.H. Zhou 2209
Study on the Relationship between Nominal Filtration Accuracy and Absolute Filtration
Accuracy of the Automobile Engine Oil Filter Materials
J.Y. Feng, J.C. Zhang, H. Zhang and D.X. Yang 2213
Real-Time Monitoring Device and Method of the Compression Stress of Rubber Materials
M.Y. Yang, W.F. Zhang, Y. Chen, L. Zhao and M.L. Ding 2219
In Situ FTIR Spectroscopy Study on the Crystallization Process of Isotactic Polypropylene in
Isotactic Polypropylene/Polyethylene-Glycol Blends
X.Y. Li, L. Yang and D.C. Liu 2223
The Two-Stage Curing Method for Shape-Memory Materials
H. Sun, Y.Y. Liu, H.F. Tan and C.G. Wang 2227
cx New Materials and Processes
Effect of Shear Intensity on Structure and Properties of PA1010/CaCl2 CompositesS.J. Lu, H.H. Gan, M. He, Z. Hu and J. Yu 2231
Biosorption of Food Dye onto Gelatin Microspheres: Equilibrium Isotherm and
Thermodynamic AnalysisH.Y. Xue, F. Han and B.Y. He 2239
Relationship between Sequence Length and Thermal Properties of Poly(ethylene Terephthalate-
Co-4,4'-Bibenzoate) (PETBB)J.M. Jiang, J.M. Dai, S.L. Yang and G. Li 2243
Preparation of Sealing Gasket Resistant to High Temperature and Conducting Oil
M. Tian and Q. Qiao 2248
The Formation Mechanism of CH, on Nitrile Butadience Rubber in Transformer Oil
S. Zhang, L.W. Tang, M.R. Sun, F. Hu, C.H. Zhang and Y.H. Miao 2252
Synthesis of Star Cationic Polyacrylamide and its Application in the Retention and DrainageSystem ofPapermaking
Y.Y. Shan, Y.J. Fu and M.H. Qin 2256
NBR's Storage Life Prediction Based on the Accelerated Life Test
L. Zhao, W.F. Zhang, Y. Chen, M.L. Ding and M.Y. Yang 2260
Test on Indoor Thermal Environment of Haidong Region in Qinghai Province China in Winter
X.P. Zhao, Y. Liu and M.Z. Gao 2266
Radial Orientation Mechanism and Research of Short Fiber in Extrusion Die
C.J. Liu 2271
Effect ofGamma Irradiation Crosslinking on PA6 Fibers
S.F. Zhu, M.W. Shi and G.L. Dai 2280
Application as Papermaking Organic Particulate Retention Agent of Cationic PolymethylAcrylate Emulsion in Bleached Wheat Straw Pulp
Y.S. Ma, L.T. Wang, X.H. Sun, Y.F. Chen and Z. Liu 2284
Preparation and Characterization of a Novel Mixed Functional Cationic Exchange CopolymerMicrosphere as Drug Carrier
K. Wongsermsin, P. Opanasopit, T. Ngawhirunpat and P. Akkaramongkolporn 2288
Theory Study for Moving Force Identification
Z. Chen 2292
Adsorption of Food Dye onto Gelatin Microspheres: pH Effect in Kinetics and Mechanism
H.Y. Xue, F. Han and B.Y. He 2296
Morphologies and Properties of Epoxy Resin-Low Molecular Weight Polyamide Curing SystemModified with Expanded Graphite
G.X. Hou, S.W. Yao, X.M. Sang and S.W. Yu 2300
An High-Performance Water-Based Drilling Fluid and its ApplicationK.H. Lv, X.D. Wu, T. Shi, K.L. Ren and Y.X. Liu 2304
Synthesis, Characterization, and Flocculation Properties of Branched PolyacrylamideW.M. Sun, G.C. Zhang, H.L. Li, D.D. Li, P.P. Li, B.C. Liu, D. Zhang, X. Lei and Q.R. Zhao 2311
Preparation and Uranium Sorption Performance of Amidoximated
Polyacrylonitrile/Organobentonite Nano CompositeJ.N. Shen, J. Yu, Y.X. Chu, Y. Zhou and W.J. Chen 2317
Effect ofCarbon Fiber Reinforcement on the Mechanical and Tribological Properties of
PA6/PPS CompositesS.F. Zhou, C.Q. Wu, L.H. Chen and Q.X. Zhang 2323
Study on Synthesis ofCationic Polymethyl Acrylate EmulsionY.S. Ma, L.T. Wang, X.H. Sun, Y.F. Chen, Z.F. Dou and G.Q. Lu 2328
Advanced Materials Research Vols. 476-478 cxi
Chapter 14: Thin Films
Soft Magnetic Property of [Fe8oNi2rO/ZnO)n Multilayer Thin Films for
High-Frequency ApplicationY. Wang, H. Geng, S.J. Nie, J.Q. Wei, L.S. Wang, G.H. Yue, Y.Z. Chen and D.L. Peng 2335
Analysis of Wet Etching Characteristics of a-IGZO Thin Film
L.L. Chen, X.F. Li, J.F. Shi, H. Zhang, C.Y. Li and J.H. Zhang 2339
Effects ofSubstrate Bias on the Microstructurc and Properties of a-C:H Films
Deposited by MFPUMST
H.Y. Dai, F.X. Zhai, X.R. Cheng, L. Su and Z.P. Chen 2344
Preparation and Characterization of Electrospun Poly (3, 3'S, 5'-Tetramethyl-4, 4'-
Diaminodiphenyl-Butyltoluene-Co- 3, 3', 4, 4'-Biphenyltetracarboxylicdianhydridc)Nanofiber Membranes
Y. Peng, J.H. Jin, S.L. Yang and G. Li 2348
Effect of Deposition Temperature on Surface Roughness of Nanocrystallinc Diamond Film
W.Q. Dai, L.J. Wang, J. Huang, Y.F. Liu, K. Tang and Y.B. Xia 2353
Effects of Pulsed Negative Bias and Current Density on Properties of N-Doped TiO* Films
Deposited by Arc Ion Plating
S.J. Zhang, M.S. Li, Z.Q. Chen and Y.Z. Fan 2357
Preparation of Ultra-High Molecular Weight Polyethylene Microporous Membranes via
Thermally Induced Phase SeparationL.L. Zhu, Z.M. Hu, J.R. Yu, G.P. Tang, L. Chen and J. Zhu 2363
Microstructure and Properties of Laser Clad Nonmagnetic WC-FeNiCr Metal-Matrix
Composite CoatingJ.X. Yang, X.H. Miao and F.L. Liu 2368
First-Principles Study of Electronic Structure of V-Si-N Nanocomposite Thin Film
H.L. Jia, Z.X. Li and XJ. Liu 2374
Research on the Experiment ofZnO Thin Film by Pulsed Laser Deposition
Q. Ke, Y.F. Wang and J.J. Hu 2379
A Method of Fault Detection and Diagnosis for Electromagnetic Direction Valve Based on
Artificial Neural Network
M.Q. Dai, W. Cai and S.D. Zhao 2384
Post-Processing and Properties of Polyethersulfone Hollow Fiber Membrane
P. Lan, W. Wang and J.D. Cao 2389
Study on the Tensile Fracture Characteristics of Cars Oil Filter Materials
J.Y. Feng, J.C. Zhang and H. Zhang 2393
Preparation and Characterization of Ti02 Photocatalytic Thin Film Prepared bySol-Gel Dip Coating
J.J. Wang, K. Zheng, C. RUssel and W. Liang 2398
Effects of Ce Doping on the Properties ofZnO Thin Films Prepared by DC Reactive
Magnetron Sputtering
Q. Luo, L.S. Wang, Z.W. Wang, Y.Z. Chen, G.H. Yue and D.L. Peng 2403
The Characterization ofTi02 Films Prepared by PyrolysisX.T. Hu, B. Xie and S.H. Zhang 2407
Wuxi Hui-Quan Substation Three-Dimensional Modeling and CIS System Implementation
Q.L. LiuandW.S. Hu 2411
Buffer Layer Effects on the Structure and Morphology of SmCo/Cu Thin Films
Q.P. Zhang, Q.Q. Fang, W.N. Wang, Q.R. Lv, Y.M. Liu and H.M.Zhang 2415
cxii New Materials and Processes
Preparation and Mechanical Characterization of Nanocrystalline Diamond Films on Aluminum
Oxide Substrates
X.Q. Meng, W.J, Fu, B. Wang and C.T. Yang 2419
Chapter 15: Mechanical Behavior & Fracture
An Integrated Evaluative Function and Water Bloom Predicting and Prewarning SystemZ.W. Liu, X.Y. Wang and Q.M. Wu 2427
Grey Relational Grade Analysis between Vickers Hardness and Fatigue Crack Growth Data of
2024-T351 Aluminum AlloyC.C. Ni 2435
Studies of Ti-15V-3Cr-3Al-3Sn after Thermohydrogen ProcessingR.T. Huang, P.C. Tsay and W.H. Chen 2440
A Fractal Study on Collective Evolution of Short Fatigue Cracks under Various
Strain AmplitudesZ. Wang, W.Y. Xie, L. Wang and J.X. Liu 2444
Effect of Energy Input of Welding Thermal Cycles on the Cryogenic Toughness of the CGHAZ
in Steel 9Ni
D. J. Wang, L.G. Liu, Y.H. Wang, X.Q. Zhao, W.J. Liu and Q.F. Wang 2449
An Investigation on the Shear Toughness for Sn/3.0Ag/0.5Cu and Sn/37Pb Solder Ball Joints
CM. Hsu, T.P. Hung, A.D. Lin and J.H. Kuang 2455
Size Effects on Biaxially Compressed Stability ofTriaxial Weave Fabric CompositesN. Rasin, A.B.H. Kueh, M.N.H. Mahat and A.Y. Mohd Yassin 2459
Study on Mechanism of L-Shaped Concrete-Filled Steel Tubular Columns Subjected to
Axial CompressionJ.C. Zhang and J. Yang 2463
Effect of Y and Zn Substitution on Tensile Properties of 6H-Type LPSO Phase in
Mg^Zn^i AlloyP.Y. Tang, B.Y. Tang, L.M. Peng and W.J. Ding 246V)
Hardness of Rapidly Solidified Al-High Si AlloysF. Alshmri and H.V. Atkinson 2476
In-Plane Crushing of Triangular Honeycomb Cores, Part II: Under Dynamic Loadings
D.Q. Sun, Y.F. Guo and R.H. Xia 2481
An Investigation to Added Mass Force on the Wing of Insect Inspired from a RigidSphere Model
M.J. Hu, X.Y. Yan and J.Y. Yan 2485
GIS-Based Environmental Sensitivity Evaluation for Supporting Scenic Area Planning: Case
Study of Lushan-Xihai International Art Park
Z. Yang, W.X. Xin and Y. Li 2489
Correlation between NDT and Tensile Strength of Structural Larch Sawn Lumber
Y. Chen, W.N. Li, X.J. Wang and S.J. Shen 2496
In-Plane Crushing of Triangular Honeycomb Cores, Part I: Under Quasi-Static LoadingsD.Q. Sun, Y.F. Guo and G.T. Xu 2501
Mechanical Analysis for Laying Thermal Insulation PipeJ.H. Chen, M.L. Duan and J. Zhang 2505
Numerical Analysis ofThermally-Induced Residual Stresses in Beryllium Caused by BcOJ. Mao, L.J. He and D.M. Xu 2510
Nonlinear Stability Analysis for FGM Shallow Conical Shells Subjected to Thermal and
Mechanical United Loads
J.C. Xu, C. Deng and H. Wang 2515
Advanced Materials Research Vols. 476-478 cxiii
First-Principles Study on the Ideal Strengths of Typical Hep Metals
L. Fu, Q. Zhang and B.Y. Tang 2523
The Influence of Pore Defects Distribution Characteristic on Casting Service Performance and
Fatigue Life
L. Rao, L.B. Zhu, Q.Y. Hu and X.L. Li 2530
Mechanical Properties of High Strength Concrete Filled Steel Tubular Columns Part 2: Slender
Columns and Eccentrically Loaded Columns
L.B. Liu, K.F. Tan and H.L. Yu 2534
Failure Prediction of Laminated Composites with the Hole under in-Plane Compressive Loading
Y.H.Yang 2539
Numerical Simulation for Mechanical Behavior of Carbon Black Filled Rubber CompositesBased on Plane Stress Model
Q. Li and X.X.Yang 2543
Three-Dimensional Elastic-Plastic Constraint Analysis for Side Crack Tension SpecimenZ.X. Wang and G.C. Jiao 2548
Reliability Design for Allowable Stress of Creep Rupture Strength of 4Cr25Ni3S Steel
IB. Pei, Y.F. Zhao, S.P. Yu and J. Zhao 2552
The Two Dimensions Analysis of Localzation Bandwidth in Material Distortion
T.J. Dong and O. Cheng 2556
Simulation of First Mode Crack Propagation in a Viscoelastic Solid System Fuel Structure
Using Crack Length-Temperature SuperimpositionM. Omair, K. Parvez and M. Azam 2561
Design for Manufacture and Integrated Manufacturability Evaluation System
H.J. Liu, X.Y. Tong, S.L. Lv and Q.M. Fan 2567
Microstructure and Mechanical Characteristics of the CrN/Si3N4 Multilaycred Films
Prepared by SputteringC.C. Liu, K.I. Liu, H.T. Lin and Y.M. Cheng 2571
Chapter 16: Tooling Testing and Evaluation of Materials
Analysis on Test Method of Metal Magnetic Memory Mechanism of Ferromagnetic Materials
Based Plastic Deformation
R.B. Gou and Y.L. Zhang 2577
Damage Evaluation of Supercritical C02 for Hydronibrile Nitrile(HNBR)X.L. Yang, F. Wang, Q. Li, D.P. Zhang, D.Z. Zeng, H.J. Zhu, Y.H. Lin and S.O. Li 2582
The Application of Multiaxial Fabric Blower Blade and its Strength Theory Check
Z.Y. Wu and C.F. Zhang 2586
Application of Ultrasonic Guided Wave Method for Flaw Detection in Coal-Fired Power Plants
S.T. Li, U.S. Cai and J. Yang 2590
Monitoring and Characterization of Chemical Shrinkage during Curing in a RTM Resin
X.Q. Li, Z.L. Zhang and X.S. Yi 2594
Failure Analysis of Hard Alloy Roll Rings and their Repairing TechnologyL.R. Huang, F.F. Liu and Y.H. Chen 25W
Characterization of Wafer Surface Topography after CMP
R. Wang, J. Wang, M. Sun, B.H. Gao, R.X. Yang and Y.L. Liu 2603
The Deduction and Application of Correction Formulas of Three-Dimensional Residual Stress
with Layer Stripping MethodH.R. Huang and X.Y. Li 2608
cxiv New Materials and Processes
Equilibrium Automatic Wind Door and Electronic Control SystemG.Z. Cheng, H.F. Lin and Y.T. Zheng 2613
Spectroscopy Methods in Analysis of Mineral CompositionT. He 2617
Preparation and Activity of Ionic Liquid Catalysts Grafted on Hydrophobic Silica Gel
X.L. Zhang and D.F. Wang 2621
Analysis of Volatile Organic Compounds in Disposable Food Packages at Three
Types of TemperatureL. Xie, J. Yu, S. Li and S.S. Diao 2625
An Improved Standard Addition Method for Material Components AnalysisR.B. Ning, S.N. Xu and Q. Li 2630
Study on Behavior of Geosynthetic Reinforcement in GRPS Embankment
L. Yan and J.S. Yang 2634
Keyword Index 2639
Author Index 2657