Upload
rajyalakshmi-jammalamadaka
View
3
Download
1
Embed Size (px)
DESCRIPTION
multiple choice questions
Citation preview
1. The function of geometric modeling doesn’t include…A. ManufacturingB. QualityC. MarketingD. Design
[ ]
2. Which fallowing cannot be used for finite element analysisA. Surface modellingB. Wireframe modellingC. Solid modellingD. Drafting
[ ]
3. The core product model required for any cad/cam modeling…A. Data modelB. Solid modelC. PrototypeD. Geometric model
[ ]
4. Ambiguous representation of real object is seen in …A. Surface modellingB. Wireframe modellingC. Solid modellingD. Drafting
[ ]
5. Number of lines required to represent a cube in wire frame model are ..A. 8B. 12 C. 16D. 24
[ ]
6. Which is not a analytical entity in the fallowingA. LineB. Circle C. FilletD. Arc
[ ]
7. One of the fallowing is not a synthetic entity…A. B-splineB. Bezier curveC. Cubic splineD. Hyperbola
[ ]
8. C1 continuity of curve refers to …common
A. PointB. TangentC. NormalD. Curvature
[ ]
9. The minimum order polynomial that has C0, C1,C2 continuity….A. B-SplineB. Bezier curveC. Hermite cubic splineD. Quadratic polynomial
[ ]
DATE: REG.NO:
PVP SIDDHARTHA INSTITUTE OF TECHNOLOGY, KANURUDEPARTMENT OF MECHANICAL ENGINNERING
IV B.TECH (Mech – S1 & S2) 1st Objective Examination-1 2015-16 Sem-1
SUBJECT: CAD/CAMMax Marks:09 Time: 20 min.
10. The actual size of the drawing area is specified by the commandA. LimitsB. LineC. UnitsD. Point
[ ]
11. In AUTOCAD the resolution of the movement can be effectively controlled by A. SnapB. LimitsC. OrthoD. Units
[ ]
12. In AUTOCAD ELEVATION command is used to maintain same level of…A. X valueB. Y valueC. Z valueD. A value
[ ]
13. In AUTOCAD when incremental values are used to specify a point , fallowing is to be expected A. All X,Y,Z are in incremental B. Both X,Y only in incrementalC. Both Y,Z only in incrementalD. Both X,Z only in incremental
[ ]
14. Default layer name given by AUTOCAD is A. 0B. 1C. 2D. 3
[ ]
15. All the information entered would go in to the ----- layer A. InactiveB. OnC. OffD. Current
[ ]
16. In AUTOCAD, -----command is used to draw new drawings on the existing drawingsA. PANB. OSNAP C.ROTATED. ARRAY
[ ]
17. In AUTOCAD, -----command constructs an entity parallel to other entity A. FILLETB. CHAMFERC. OFFSETD. ARRAY
[ ]
18. Geometric modeling has the facility of revolving about an axis with axis or radial offset for generating….A. Helical shapesB. linear shapesC. RectanglesD. Squares
[ ]