Many of the budget lubricants use cut rate ingredients to achieve a certain price point. Evinrude/Johnson lubricants are blended with the highest quality base stock and additive packages. Our choice of ingredients is driven by the demands of the 2-cycle engine. From vintage technology engines to the latest computer controlled models, Evinrude/Johnson has your lubricant needs covered.

DRIVEN BY THEDEMANDS OF YOUR ENGINE.

XD100™ – FOR USE IN EVINRUDE® E-TEC®, EVINRUDE DIRECT INjECTION AND OIl INjECTION OUTBOARDS.XD100 synthetic formula oil provides uncompromised lubrication and superior performance - even in extreme conditions (works down to 0°F). XD100 oil is a premium synthetic formula that delivers ultimate performance and lubricity for reduced oil consumption and minimal friction and wear. When you allow an authorized dealer to program your Evinrude E-TEC outboard EMM to use XD100 oil, you can reduce normal oil consumption compared to using conventional oil*. And, you’ll get maximum detergency for reduced combustion deposits, while having no smoke, odor or ash.

XD50™ – FOR USE IN EVINRUDE E-TEC, EVINRUDE DIRECT INjECTION, OIl INjECTED, AND CARBURETED 2-CYClE OUTBOARDS. XD50 is a performance enhanced synthetic blend oil that meets the specific demands of direct injection outboards and 2-cycle outboards that specify TC-W3 certified oils. XD50 reduces smoke for cleaner operation and protects against wear with superior lubricity - even in extreme condi-tions (works down to 0°F). Contains combustion cleaner to keep carbon in suspension and away from critical engine components. XD50 should be used in high load and performance applications for greater dependability, reliability and reduced maintenance.

XD30™ – FOR USE IN CARBURETED 2-CYClE OUTBOARDS. XD30 is formulated for water-cooled 2-cycle outboards and other 2-cycle engines that specify TC-W3, API TC, JASO FB certified oils. This exclusive performance enhanced blend provides greater lubrication and detergency than the minimum TC-W3 requirements. It minimizes carbon and deposit buildup, while protecting against wear with premium lubricity. Use XD30 in general and light load applications for dependability and value. And, XD30 is approved for pre-mix and oil injection.

*Not available on certain models

©2012 BRP US Inc. (BRP). All rights reserved. ®™ Trademarks of Bombardier Recreational Products Inc. or its affiliates. Terms and conditions apply. Offer may not be assigned, traded, sold or combined with any other offer unless expressly stated herein. OFFER VOID WHERE RESTRICTED OR OTHERWISE PROHIBITED BY LAW.

©2012 BRP US Inc. (BRP). All rights reserved. ®™ Trademarks of Bombardier Recreational Products Inc. or its affiliates. P/N 766859Terms and conditions apply. Offer may not be assigned, traded, sold or combined with any other offer unless expressly stated herein. OFFER VOID WHERE RESTRICTED OR OTHERWISE PROHIBITED BY LAW.

2+4® FUEL CONDITIONER. New Ethanol Protection Formula. Encourage your customers to use Evinrude Johnson 2+4 Fuel Conditioner in every tank of fuel. Give them peace of mind knowing that their engine has maximum protection from the potentially harmful effects of Ethanol enhanced fuels.

HPF PRO is the factory fill gearcase lubricant for Evinrude E-TEC outboards. Use HPF PRO gearcase lubricant for high performance outboards, commercial fleets, rental operations and stern drives. A high-viscosity blend of enhanced friction reducers, anti-foam agents, and synthetic E-P additives systematically deliver exceptional durability and reliability with ultimate film strength. Marine-specific inhibitors and emulsifiers deliver unequaled protection against corrosion and lubricant breakdowns caused by water intrusion.

A tough grease that stays in place and is unaffected by vibration, saltwater, or cold temperatures. New, reformulated Triple-Guard has higher water resistance and improved adhesion to metal. It is ideal for owner engine maintenance and won’t swell seals, packing or O-rings. Although not for use in wheel bearings or universal joints, Triple-Guard is compatible with other greases. Totally waterproof to prevent water wash-off, and can even be used on spark plug wire leads.

Helps to remove excessive carbon deposits from rings, pistons, valves and ports. Spray through the air intake of 2 and 4 cycle engines for improved performance.

Spray through air intake of a running engine to protect against internal corrosive acids or rust during storage. Protects all external areas from saltwater and moisture. Use on controls, connectors, linkages, and tools.

ADD INSURANCE TO EVERY TANK OF FUEl.

HPF PRO™ GEARCASE lUBRICANT

TRIPlE-GUARD® MARINE GREASE

ENGINE TUNER

STORAGE FOGGING OIl

NEW!