Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
*If the pumping liquid is heavy oil B, C and others, please contact us.
■Standard specifications
■Specification table
■Standard accessories
■Special specifications
■Special accessories
* Please note that the paint color, etc, of the actual unit may partially differ from the photo.
■Applications
■Features
●For industry and for transfer of kerosene used in various facilities
(buildings, housings, etc.)
●For transfer of various fuel oils
●For lubrication of various machines
●For transfer of various viscous solutions
①As the gear is a one-point continuous contact and segmental gear, no liquid is trapped and neither high pressure nor high vacuum is generated, resulting in no noise or vibration.②The bearing requires no lubrication because of a two-point support
structure of a needle bearing and an internal plain bearing and forced self-lubrication.③As a mechanical seal is used for the shaft seal part, no liquid leak or air
suction occurs.④As the pump has a built-in safety valve, abnormal pressure does not rise.
Sluice valve, Check valve, Pressure gauge, Compound gaugeStrainer (Y type, single, duplex)
Motor ……………………………………………………………………………1Common base …………………………………………………………………1Safety valve ……………………………………………………………………1Companion flange (20mm or more) ……………………………………2 setsCoupling ……………………………………………………………………1 setCoupling cover …………………………………………………………………1
0.2 0.30.30.30.30.30.30.3
160.2 160.4 290.75 461.5 672.2 1053.7 155
0.4 140.4 140.75 261.5 422.2 633.7 1005.5 150
Note) This specifications table shows the values when kerosene is used as a sample liquid.Note) This specifications table shows the values when kerosene is used as a sample liquid.
●GPLⅡ ●GPMⅡ
Type
Specifications
Type
Specifications
Discharge rateL/min
Discharge pressureMPa
Discharge rateL/min
Discharge pressureMPa
Borediameter
mm
OutputkW
Borediameter
mm
OutputkW
GPMⅡ-10VGPMⅡ-15VGPMⅡ-20VGPMⅡ-25VGPMⅡ-32VGPMⅡ-40VGPMⅡ-50V
GPLⅡ-10VGPLⅡ-15VGPLⅡ-20VGPLⅡ-25VGPLⅡ-32VGPLⅡ-40VGPLⅡ-50V
0.4 - 0.50.4 - 0.50.4 - 0.50.4 - 0.50.4 - 0.50.4 - 0.50.4 - 0.5
10(⅜)15(½)20(¾)25(1)32(1¼)40(1½)50(2)
10(⅜)15(½)20(¾)25(1)32(1¼)40(1½)50(2)
■Description of types
①Model②Head type L: Low head M: High head
③Nominal suction/discharge diameter (25mm)④Internal code
①
②
③ ④GPLⅡ - 25 V
kerosene, light oil, heavy oil AViscous liquid (1 - 300mm2/s)
0 - 80°C
−5m
0.10MPaGear
Mechanical sealNeedle bearing
S45CS45CFC200
Standard efficiency (equivalent to IE1)Direct-on-Line start
Increased-safety explosion-proof indoor type3-phase 200V
1500min-1
Screwed type: 10 - 15mmFlange type, JIS 10K standard type: 20 - 50mm
Liquid qualityViscosity
Liquid temperature
ImpellerShaft sealBearingImpeller
Motor shaftCasing
EfficiencyStarting method
TypePower source
Synchronous rotation speed
Pumpingliquid
Structure
Material
Motor
Total suction head(In case of 20°C)
Allowable push-in pressure
Connection
MotorType
Power supply
Totally enclosed fan-cooled type, explosion-proof type
Voltage change: single-phase / 100V, 3-phase / 400V
Oil pumps Direct-coupledGear-type
GPMⅡGPLⅡ
2
0.4 65 125 165 335 444 175 120 420 300 200 230 3320
0.75 65 125 165 335 476 181 140 420 300 200 230 400.75 70 140 175 350 496 181 140 470 350 220 250 44
251.5 70 140 175 350 550 195 169 470 350 220 250 52
Type A B D H L KL MR BL BM BP BXBore diameterd
OutputkW
Approx. masskg
0.2 415 165 103 290.4 444 175 120 310.2 415 165 103 290.4 444 175 120 31
Type L KL MRBore diameterd
OutputkW
Approx. masskg
●Bore diameter 10 - 15mm
Flange dimensions: JIS 10K standard type or equivalent
(Unit: mm)
(Unit: mm)
Rc⅜Rc⅜Rc½Rc½
GPLⅡ-10VGPMⅡ-10VGPLⅡ-15VGPMⅡ-15V
GPLⅡ-20VGPMⅡ-20VGPLⅡ-25VGPMⅡ-25V
Coupling cover
4×φ15 Foundation bolt hole
■Assembly drawing
■Dimensions
●Bore diameter 20 - 25mm
■Assembly drawing
■Dimensions
Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer.
Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer.
13L
Coupling cover
4×φ15 Foundation bolt hole
20d
d
6060 200
230
300
420
125 65
165
335
150KL
MR
D
AB13L
60BM60BL
H
MR
BPBX
20
200KL
φd
φd
Oil pumpsDirect-coupledGear-type
GPMⅡGPLⅡ
3
■Assembly drawingFlange dimensions: JIS 10K standard type or equivalent
Flange dimensions: JIS 10K standard type or equivalent
GPLⅡ-40V 2.2 85 160 207 218 35 425 240 629 18 210 193 7840
GPMⅡ-40V 3.7 85 160 207 218 35 425 240 646 18 227 200 92GPLⅡ-50V 3.7 105 190 227 263 30 490 250 700 22 227 200 102
50GPMⅡ-50V 5.5 105 190 227 263 40 490 250 766 22 271 239 124
Type A B D E F H K L S
---12.5
P KL MRBore
diameterd
OutputkW
Approx. masskg
(Unit: mm)
Coupling cover
4×φ15 Foundation bolt hole
■Assembly drawing
■Dimensions
●Bore diameter 40 - 50mm
●Bore diameter 32mm
Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer.
1.5 580 195 169 592.2 619 210 193 66
Type L KL MROutput
kWApprox. mass
kg
520535
BL
85100
BN
(Unit: mm)
GPLⅡ-32VGPMⅡ-32V
■Dimensions
Note) Total length dimension, approximate mass and terminal box position may be slightly different depending on motor manufacturer.
Coupling cover
4×φ15 Foundation bolt hole200
BL
20
60350 85
240KL
250
45
18 150 85MRL
207
415
15
φ32
φ32
BN
B
LS
DH
25 F50100400
600
220250
P260
40
KKL
MR A
E
φd
φd
Oil pumps Direct-coupledGear-type
GPMⅡGPLⅡ
4
■Example of sectional drawing
■Parts list
●Bore diameter 10 - 15mm ●Bore diameter 20 - 25mm
21 181916 20 1715612
1311 95 7 310 4 814 2
1
313978512214410
171819212016151611
No. Part name Qty Material1234567891011
CasingGland caseSide coverMain drive shaftDriven shaftMain drive gearDriven gearKeyKeyKeyHousing
11111111113
FC200FC200FC200S45CS45CS45CS45CS50CS50CS50CFC200
No. Part name Qty Material12131415161718192021
HousingNeedle bearingMechanical sealRelief valve bodyRelief valve coverRelief valveRelief valve springSpring retainerAdjusting screwCap
1411111111
FC200SUJ2
Ceramic vs CarbonFC200FC200
CAC403SWPASS400SS400FC200
Oil pumpsDirect-coupledGear-type
GPMⅡGPLⅡ
5
,
TERAL INC.Head Office 230, Moriwake, Miyuki-cyo, Fukuyama-city, Hiroshima, 720-0003, Japan
Tel.+81-84-955-1111 Fax.+81-84-955-5777www.teral.net
Teral Asia LimitedRoom 1001,10/F, Olympia Plaza, 255 King's Road, North Point, Hong Kong
Tel.+852-2571-0935 Fax.+852-2571-0619
TERAL THAI CO.,LTD.150 Moo 16 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 13160 Thailand
Tel.+66-3535-2148-9 Fax.+66-3535-2150
TERAL TRADING & SERVICE CO.,LTD. 150 Moo 16 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 13160 Thailand
Tel.+66-3535-2145-7 Fax.+66-3535-8549
Teral Malaysia Sdn.Bhd. 10, Jalan SS13/6A, Subang Jaya Industrial Estate, 47500, Subang Jaya, Selangor D.E, Malaysia
Tel.+60-3-5611 5775 Fax.+60-3-5612 5775
PT.Teral Indonesia Pumps and Fans Jalan BSD Sektor XI Taman Tekno, Block G3 No.8, Setu Tangerang Selatan, Banten, Indonesia 15314
Tel.+62-21-29665778 Fax.+62-21-75673913
Teral Vietnam Limited Liability Company 9th Floor, LADECO Building, No. 266 Doi Can Street, Lieu Giai Ward,Ba Dinh District, Hanoi City, Vietnam
Tel.+84-24-393-52-790 Fax.+84-24-393-52-289
Teral General Machine (Shanghai) Co.,Ltd. No.285, Yuan Qu Road(N), Bei Qiao, Min Hang District, Shanghai 201109, China
Tel.+86-21-6490-9128 Fax.+86-21-6490-9126
Teral-Aerotech Fans Private Ltd. Plot No.188-189, Ecotech Extension-1, Surajpur Kasna Road, Greater Noida-201306, Uttar Pradesh, India
Tel.+91-9810162210, +91-9310162210
Teral Middle East F.Z.C. 1806-002, 18th floor, BB1, Mazaya Business Avenue, JLT, Dubai, UAE. PO Box 414781
Tel.+971-4369 9039
Teral Pumps & Fans North America Ltd. Suite # 197, 800-15355 24 Ave Surrey, B.C., CANADA V4A 2H9
Tel.+1-604-839-1008
Please note that product specifications are subject to change for improvement without prior notice.
2018 10
E-CAT5-P-GPLM-01-A