Om Bb Maxi Fixarm En

8/6/2019 Om Bb Maxi Fixarm En

1/11

Owners manualManual de montajeNotice de montageManual do utilizador

BUGGYBOARD-MAXI

With xed arms Con brazos jos Bras xes Com braos xos

Control no.

BuggyBoard is a registered trade-mark and is protected by patent.

EN ES FR PT

80510


2/11- 2 -

Franais

Cher utilisateur, merci davoir choisi le BUGGYBOARD-MAXI de Lascal. Nous esprons quece produit vous satisfera et vous souhaitons bonne route avec votre BUGGYBOARD-MAXI.

ATTENTION!Lisez attentivement ces instructions avant toute utilisation, et conservez-les

pour un usage ultrieur.

Espaol

Estimado cliente, gracias por elegir el BUGGYBOARD-MAXI de Lascal. Esperamos que sucompra le satisfaga y que haga un buen uso de su BUGGYBOARD-MAXI .

ADVERTENCIA!Lea estas instrucciones cuidadosamente antes de su uso y gurdelas parafuturas referencias.

EnglishDear customer, thank you for choosing a BUGGYBOARD-MAXI from Lascal. We hope youwill be satised with your purchase and will get good use for your BUGGYBOARD-MAXI.

WARNING!Read these instructions carefully before use and keep for future reference.

INDEX

Portugus

Caro cliente, obrigado por escolher o BUGGYBOARD-MAXI da Lascal. Esperamos que quesatisfeito com a sua compra e que faa bom uso do seu BUGGYBOARD-MAXI.

ADVERTNCIA!Leia estas instrues cuidadosamente antes de utilizar e guarde-as parareferncia futura.


3/11- 3 -

E Content ........................... 4 Wheels .............................5 Connectors ..........................5Arms ............................... 6 Connecting .......................8 Disconnecting ......................8When not in use ................ 9 Accessories .......................9 Recycling ............................10Tests ............................... 10 Warnings .......................... 10 Warranty ............................11Other Lascal products ........ 35 Contact information ........... 37 Product registration card .......39

E Contenido de la caja .......... 12 Rueda .............................. 13 Acoples...............................13Los brazos ........................ 14 Montaje ............................16 Desmontar ..........................16Posicin de plegado ........... 17 Accesorios ........................17 Reciclaje .............................18Tests ............................... 18 Advertencias ..................... 18 Garanta .............................19Otros productos de Lascal .. 35 Puntos de informacin ........ 37 Tarjeta de reg. del producto...39

E Contenu ........................... 20 Roues .............................. 21 Connecteurs ........................21Bras ................................ 22 Attacher ...........................24 Dtacher .............................24Position de repos ............... 25 Accessoires .......................25 Recyclage ...........................26Tests ............................... 26 Mises en garde ..................26 Garantie .............................27Autres produits Lascal ........ 35 Contact ............................ 37 Carte denregistr. du produit ..39

English

Espaol

Por

tugus

Franais

INDEX

E Contedo ......................... 28 As rodas ..........................29 Os elementos de xao .......29Os braos ......................... 30 Montagem .......................32 Desmontagem .....................32Posio de descanso .......... 33 Acessrios ........................33 Reciclagem..........................34Testes .............................. 34 Advertncias ..................... 34 Garantia .............................35Outros produtos Lascal ...... 35 Informao para contacto ...37 Carto de registo de produto..39

ands

Visit www.buggyboard.info/index for additional tting advice.


4/11- 4 -

Part no. Description Pre-assembled

part

Qty.

80100 - 80106 Platform with xed arms 1

80200 Wheel locking catch 2

80220 Suspension housing, left 1

80221 Suspension housing, right 1

80241 Height adjuster 1

80249 Reector 2

80300 Arm support, left 1

80301 Arm support, right 1

80318 Strap with hook 1

80360 Fixed arm, left 1

80361 Fixed arm, right 1

80381 Cotter pin 2

80388 Arm support screw 2

80410 Connector80390 Connector cover80395 Connector bolt80400 Connector strap

2

80421 Wheel 2

80500 Owner manual 1

CONTENT

80100..80106

80380

80318

80400

80390

80395

80301

80221

80360

80361

80388

80220

80300

80249

80421

80410

80200

80241

KEEP FOR FUTURE REFERENCE

Control no.

GebrauchsanleitungNoticedemontageManualedellutenteGebruiksaanwijzing

UGGY OARD- AXI

Mat Mat

D E F R I T N L

BuggyBoardisa registeredtrademarkandisprotectedbypatent.

80501

li

h

80500


5/11- 5 -

1. Attaching the wheels

Place the platform (80100-80106) upsidedown on a sturdy surface. Push the wheels(80420) rmly into the suspension housing(80220) until the wheels click into place.

1.

a

a = max . 20 cm / 8 in.

2

1

2.2. Positioning the connectors

The connectors (80410) can be attachedfacing forward or backwards. The connectors

can be tted onto different shapes of tubingwith a maximum circumference of 20 cm (8in.). Position the connectors so that the arms(80360/80361) will be able to reach the con-nectors (maximum 35 cm (14 in.) above theground). Try to attach the connectors as lowas possible on the stroller. Position the con-nectors so that they do not interfere with thestrollers folding mechanism. The arms needto stay clear of both the braking mechanismsand the wheels of the stroller.

3. Attaching the connectors

Bend the strap (80400) around the tubing.Then feed the strap through the slot in theconnector cover (80390) and pull the strapuntil tight. Secure the connector by turningthe connector-bolt (80395) clockwise. Checkthat the stroller folds properly; if not, youmay need to reposition the connectors.

Max.

35cm/

14in.

Max.

35cm/

14in.

3.

THE WHEELS

Tip!Detaching the wheels.Pull the red wheel lockingclip out 1 cm (1/2 in.) with

a small screwdriver.

THE CONNECTORS

English


6/11- 6 -

6. Rotate the arms forward

Turn the platform on to its wheels.(A) Unlock the arms by twisting the heightadjuster (80241) until they are just released.(B) Rotate the arms forward then lock inposition.

1

2A

B

B

4.

5.

4. Tightening the connectors

The connectors must be rmly attached tothe stroller. To further tighten the connectors,only use a cotter-pin (80381) as a lever. Oncetightened, release the cotter pin by pushingthe red release button on the end of the con-nector bolt (80395).

5. Before you cut the strap

There is no need to cut the strap if it does notinterfere with attaching the BuggyBoard orstrollers folding mechanism. The strap couldbe used on a different stroller in the future.

6.

THE ARMS

li

h


7/11- 7 -

7. Positioning the cotter pins

Measure the distance between the middle ofeach of the connectors.

Deciding the cotter pin direction

If the measured distance is between:

25-40 cm (10-16 in.) Alt. A below. 40-50 cm (16-20 in.) Alt. B below.

7.

B

A

12

3

Alt. A

25-40cm 40-50cm

Alt. B

8. Choosing the correct hole

There are three holes in each arm. To choosethe hole which best suits your stroller, mountthe BuggyBoard as close as possible to yourstroller but also make sure your child canstand comfortably.Once decided, screw the cotter pin into yourchosen hole, tighten with a coin.If the arms are too short to t your stroller,there is an Extender Kit available as anaccessory, see g 13.

8.

English


8/11- 8 -

DISCONNECTING

11.

CONNECTING

9-10. Connecting the BuggyBoard

Hold the base of the arms (80300/80301)and push both red buttons. Adjust the widthof the arms and click them in to the con-nectors then release the buttons. Make sure

the arms are set an equal distance from thecenter of the board and the cotter pins arelocked in the connectors.

Levelling the platform

Unlock the height adjuster and rotate theplatform until level, then lock.

9.

10.

11. Disconnect the BuggyBoard

At the end of each connector-bolt, slide thered release buttons down, whilst lifting thearms up and out of the connectors.

li

h

IMPORTANT !

The BuggyBoard must be discon-nected from the stroller beforefolding the stroller.Do not fold the stroller with theBuggyBoard attached


9/11- 9 -

WHEN NOT IN USE

12.

Click

ACCESSORIES

6cm

3,5

cm

13. Accessory: Extender KitItem no. 11310

In order to attach the BuggyBoard to certainstrollers, an Extender Kit might be needed.

The extender prolongs the arm up to 6 cm (21/3). The Extenders Kit contains a pairs.

14. Accessory: Expandable Arm KitItem no. 11311

If the arms provided with the BuggyBoard istoo short or too narrow an Expandable Arms

Kit is available. The Expandable Arms Kit ex-tends th arms 8,5 cm (3 1/3) and also addwidth to the standard arms. The ExpandableArms Kit contains a pairs.

13.

14.

15.15. Accessory: Extra Connector KitItem no. 11313

If you want to attach the BuggyBoard to ano-

ther stroller/pram without having to removethe connectors, there is an Extra ConnectorKit available. The Extra Connectors Kit con-tains a pair.

12. When not in use

If the BuggyBoard is temporarily not in use, itcan be placed in a resting position. Clip thehook (80318) to the platform, then attachthe strap to a higher point on your stroller.

English

The use of any accessories with the BuggyBoard Basic that have not been approvedby the manufacturer is not recommended.


10/11- 10 -

Cleaning instructions: Use warm water with a soft cloth and a mild non-abresive cleanser.All parts and packaging of the BuggyBoard are made of recyclable raw materials.

CLEANING AND RECYCLING

We are committed to ensuring that this product is of the highest quality. The manu-

facturing process is regularly checked by both internal and external (TV) controllers.Samples of parts and completed products are also taken out regularly for testing in ourown testing laboratory.The BuggyBoard is tested by the test institute below.

SP Swedish National Testing and Research Institute

TESTS

Intended for use with only one child at a time fromapproximately 2 years of age and with a maximum weightof 20 kg (44 lb).

Always keep your hands on the pram when your child isstanding on the BuggyBoard. Never leave your child unat-tended while he/she is standing on the BuggyBoard. Make sure your child is always standing with both feet onthe anti-slip rear portion of the BuggyBoard. Never use the strollers parking brake while your child is

standing on the BuggyBoard. Before each use, check the connectors and tighten ifnecessary.

Do not use the BuggyBoard if any part is broken, torn ormissing.

Never let children play with the BuggyBoard.

li

h

WARNING


11/11

WARRANTY

WARRANTY

Your BuggyBoard is warranted to be free from manufacturing defects for a period of

one year from date of purchase under normal use and in compliance with the ope-rating instructions. This warranty extends only to the original retail purchaser and isonly valid when supplied with proof of purchase.

ESPAOL

Documents

Om Bb Maxi Fixarm En