Open Access proceedings Journal of Physics: Conference series - … · 2017-12-01 · Message from the President of TSME In 2010, TSME started to hold yearly international conferences

Abstract Book

The 8th TSME International Conference on Mechanical Engineering

12-15 December 2017

Arnoma Grand Hotel, Bangkok, Thailand

Host by

Department of Mechanical and Aerospace Engineering

Faculty of Engineering

King Mongkut's University of Technology North Bangkok Bangkok, Thailand

Message from the President of TSME

In 2010, TSME started to hold yearly international conferences under the name of the International

Conference on Mechanical Engineering (ICoME) with collaboration from the American Society of

Mechanical Engineers (ASME), the Japan Society of Mechanical Engineers (JSME), and the United

Kingdom's Institute of Mechanical Engineers (IMechE).

The conference is a key mechanism to develop the researches from the knowledge exchanging which

has contributed association networks and constituted a unique research community. The Mechanical

Engineering research is an important role to enhance the growth of country especially in the industry

sectors. This cooperation made a great opportunity of representing Mechanical Engineering to make the

difference and success of engineering society.

In this regard, I would like to express my congratulation and appreciation to the department of

Mechanical and Aerospace Engineering, Faculty of Engineering, King Mongkut's University of

Technology North Bangkok for the dedication to organize the 8th TSME–ICoME where will be held at

Anoma Grand, Bangkok from 12–15 December 2017. Thank you for your supporting team and all staff

for hard working to make this conference possible.

I hope the conference will be success and belief that this collaboration will be further strengthened

to the Mechanical Engineering in the years to come.

Asst. Prof. Dr. Chinda Charoenphonphanich

President of Thai Society of Mechanical Engineers (TSME)


12-15 December 2017

Bangkok, Thailand

http://www.asme.org/

http://www.jsme.or.jp/English

http://www.imeche.org/

Welcoming Message from the Conference Co-chairs

It is our greatest pleasure to welcome you all to the 8th TSME International Conference on Mechanical

Engineering, TSME–ICoME 2017, Bangkok, Thailand. The TSME–ICoME 2017 is a leading

conference of the Thai Society of Mechanical Engineering (TSME) and represents one of the only

exclusive events in Thailand where everyone "mechanically-engineering-related" can share their

profession thought, variety of knowledge, collaborations, and networks.

This year conference has brought us together more than 200 delegates from Asia, Europe, Australia

and North America to exchange knowledge by in-depth discussions and promote the international and

multi-disciplinary collaboration under the theme of “Industry 4.0 : Challenges and Solutions” The

organizing committee members of the TSME–ICoME 2017 are dedicated to arrange this event as both

memorable and impressive experiences. We hope you have an enjoyable time while staying here at our

conference.

Last but not least, we would like to thank our partners, sponsors, supporters, staff and participants

for their contribution to the conference, and wish you all a pleasant experience and wonderful time in

Thailand.

Assoc. Prof. Dr. Sinchai Chinvorarat

Prof. Dr. Suwat Kuntanapreeda

Conference Co-chairs of TSME–ICoME 2017


12-15 December 2017

Bangkok, Thailand

Contents

Page

Members of Thai Society of Mechanical Engineering (TSME) 1

Conference Program Committee 2

Host and Organizing Committee 4

Academic and Industrial Partners 6

List of Reviewers 7

Honorary Speakers 13

Keynote Speakers 13

Invited Speakers 19

Conference Program 20

Conference Venue 23

Abstract Contents 25

- Alternative Energy and Combustion (AEC) 37

- Automotive, Aerospace and Marine Engineering (AME) 56

- Applied Mechanics, Materials and Manufacturing (AMM) 71

- Biomechanics and Bioengineering (BME) 96

- Computation and Simulation Techniques (CST) 107

- Dynamic Systems, Robotics and Controls (DRC) 133

- Engineering Education (EDU) 162

- Energy Technology and Management (ETM) 167

- Industrial Entrepreneurship (IEI) 179

- Thermal System and Fluid Mechanics (TSF) 180

- ASEAN Session (ASEAN) 205


12-15 December 2017

Bangkok, Thailand

Details of Parallel Session Program 213

Members of Thai Society of Mechanical Engineering (TSME)

1. Chulalongkorn University

2. Thammasat University

3. Mahidol University

4. Kasetsart University

5. Chiang Mai University

6. Prince of Songkla University

7. King Mongkut's University of Technology Thonburi

8. King Mongkut's University of Technology North Bangkok

9. King Mongkut's Institute of Technology Ladkrabang

10. Mahanakorn University of Technology

11. Silpakorn University

12. Khon Kaen University

13. Suranaree University of Technology

14. Ubon Ratchathani University

15. Mahasarakham University

16. Rajamangala University of Technology Thanyaburi

17. Sripatum University

18. Navaminda Kasatriyadhiraj Royal Air Force Academy

19. Naresuan University

20. Pathumwan Institute of Technology

21. Burapha University

22. Rajamangala University of Technology Rattanakosin

23. Chulachomklao Royal Military Academy

24. Pathumthani University

25. Siam University

26. Rangsit University

27. Thai-Nichi Institute of Technology

28. Srinakharinwirot University

29. Rajamangala University of Technology Isan

30. Rajamangala University of Technology Lanna

31. Kasetsart University Sriracha Campus

32. Saint John's University

The 8th TSME International Conference on Mechanical Engineering 12-15 December 2017

Bangkok, Thailand

1

Conference Program Committee

Honorary Chair

Asst. Prof. Dr. Chinda Charoenphonphanich President, Thai Society of Mechanical Engineers (TSME)

General Conference Co-chairs Assoc. Prof. Dr. Sinchai Chinvorarat King Mongkut's Univ. of Technology North Bangkok, Thailand

Prof. Dr. Suwat Kuntanapreeda King Mongkut's Univ. of Technology North Bangkok, Thailand

General Conference Secretariat Asst. Prof. Dr. Petch Jearanaisilawong King Mongkut's Univ. of Technology North Bangkok, Thailand

International Scientific Committee Prof. Dr.-Ing. Heinz Peter Berg Brandenburg University of Technology Cottbus-

Senftenberg, Germany

Prof. Dr. Ashim K. Datta Cornell University, USA

Prof. Dr. Ashwani K. Gupta University of Maryland, USA

Prof. Dr. Katsunori Hanamura Tokyo Institute of Technology, Japan

Prof. Dr.-Ing. Lothar Kroll Chemnitz University of Technology, Germany

Prof. Dr. Ocktaeck Lim University of Ulsan, Korea

Prof. Dr. Jau-Huai Lu National Chung Hsing University, Taiwan

Prof. Dr. Naoki Maruyama Mie University, Japan

Prof. Dr. Shinichi Nakasuka University of Tokyo, Japan

Prof. Dr. Hironori Saitoh Sojo University, Japan

Prof. Dr. Marco P. Schoen Idaho State University, USA

Prof. Dr. Ning Zhu Shizuoka Institute of Science and Technology, Japan

Assoc. Prof. Dr. Elmi Abu Bakar Universiti Sains Malaysia, Malaysia

Assoc. Prof. Dr. Huynh Thanh Cong Ho Chi Minh City University of Technology, Vietnam

Assoc. Prof. Dr. Seokwoo Jeon Korea Advanced Institute of Science and Technology, Korea

Assoc. Prof. Dr. lman K. Reksowardojo Institute of Technology Bandung, Indonesia

Assoc. Prof. Dr. Hendri Syamsudin Institute of Technology Bandung, Indonesia

Assoc. Prof. Dr. Le Anh Tuan Hanoi University of Science and Technology, Vietnam

Assoc. Prof. Dr. Pham Huu Tuyen Hanoi University of Science and Technology, Vietnam

Asst. Prof. Dr. Pham Tuan Anh Ho Chi Minh City University of Technology, Vietnam


Bangkok, Thailand

2

Local Scientific Committee Prof. Dr. Viboon Sangveraphunsiri Chulalongkorn University

Prof. Dr. Tanongkiat Kiatsiriroat Chiang Mai University

Prof. Dr. Somchai Wongwises King Mongkut's University of Technology Thonburi

Prof. Dr. Sumrerng Jugjai King Mongkut's University of Technology Thonburi

Prof. Dr. Phadungsak Rattanadecho Thammasat University

Prof. Dr. Chaosuan Kanchanomai Thammasat University

Prof. Dr. Somchai Hanklar Navaminda Kasatriyadhiraj Royal Air Force Academy

Prof. Dr. Suwat Kuntanapreeda King Mongkut's Univ. of Technology North Bangkok

Assoc. Prof. Dr. Withaya Yongcharoen Chulalongkorn University

Assoc. Prof. Dr. Kanit Wattanavichien Chulalongkorn University

Assoc. Prof. Dr. Worawut Wisutmetthangoon Prince of Songkla University

Assoc. Prof. Dr. Jarruwat Charoensuk King Mongkut’s Institute of Technology Ladkrabang

Assoc. Prof. Dr. Ratchaphon Suntivarakorn Khon Kaen University

Assoc. Prof. Dr. Smith Eiamsa-ard Mahanakorn University of Technology

Assoc. Prof. Dr. Sinchai Chinvorarat King Mongkut's Univ. of Technology North Bangkok

Asst. Prof. Dr. Jackrit Suthakorn Mahidol University

Asst. Prof. Dr. Petch Jearanaisilawong King Mongkut's Univ. of Technology North Bangkok

Asst. Prof. Dr. Tonkid Chantrasmi King Mongkut's Univ. of Technology North Bangkok

3

Host and Organizing Committee

Host

Department of Mechanical and Aerospace Engineering (MAE)

Faculty of Engineering

King Mongkut’s University of Technology North Bangkok (KMUTNB), Bangkok, Thailand

Organizing Committee Advisory Board

Prof. Dr.-Ing. Suchart Siengchin President, King Mongkut’s University of Technology North Bangkok (KMUTNB)

Assoc. Prof. Dr. Somrerk Chandra-Ambhon Vice President for Research and Technology Development, KMUTNB

Assoc. Prof. Dr. Udomkiat Nontakaew Dean, Faculty of Engineering, KMUTNB

Dr. Temsiri Sapsaman Associate Dean for Research and Innovation, Faculty of Engineering, KMUTNB

Asst. Prof. Dr. Boonchai Watjatrakul Head, Department of Mechanical and Aerospace Engineering, Faculty of Engineering, KMUTNB

Co-chairs

Assoc. Prof. Dr. Sinchai Chinvorarat

Prof. Dr. Suwat Kuntanapreeda

Secretariat

Asst. Prof. Dr. Petch Jearanaisilawong

Secretariat Assistant Asst. Prof. Dr.-Ing. Krongkaew Laohalidanond

Finance, Registration and Exhibits Asst. Prof. Dr. Chak Chantalakhana

Asst. Prof. Dr. Patcharin Saechan

Publicity and Public Relations Asst. Prof. Dr. Tonkid Chantrasmi

Dr. Thada Suksila


Bangkok, Thailand

4

Members Assoc. Prof. Dr. Thanakom Soontornchainacksaeng Assoc. Prof. Dr. Somrat Kerdsuwan

Assoc. Prof. Dr. Pudit Laksanacharoen

Assoc. Prof. Dr. Chanyut Kolitawong

Asst. Prof. Dr. Pumyos Vallikul

Asst. Prof. Dr. Suthum Patumsawad

Asst. Prof. Dr. Suvanit Chitsiriphanit

Asst. Prof. Dr. Chinarong Srikunwong

Asst. Prof. Dr. Arisara Chaikittiratana

Asst. Prof. Dr. Pongsak Nimdum

Asst. Prof. Dr. Pisit Yongyingsakthavorn

Asst. Prof. Tosaporn Soontornpasatch

Asst. Prof. Manop Kongkaniti

Dr. Wiboon Lertwimolnun

Dr. Sawangtit Srikitsuwan

Dr. Phongsatorn Saisutjarit

Dr. Theerapol Sriyubol

Dr. Ekkarin Phongphinittana

Dr. Baramee Patamaprohm

Dr. Teerawat Sangpet

Dr. Khemapat Tontiwattanakul

Dr. Piyalux Phetang

Ms. Chutchanok Tanchaturong

Ms. Siriporn Soodkaew

Ms. Nopparat Klayklueng

Ms. Savitee Viboonchaicheep

Mr. Anan Pratangtanee

Mr. Aswin Sukhavachana

Mr. Chaiwat Piwbang

Mr. Thanapat Puttasri

Mr. Chananun Bunkong

Mr. Sarawut Sinmun

5

Academic and Industrial Partners

Brandenburg University of Technology Cottbus-Senftenberg, Germany

Chemnitz University of Technology, Germany

The Waste Incineration Research Center (WIRC), KMUTNB, Thailand

Michelin Siam Co., Ltd., Thailand


Bangkok, Thailand

6

List of Reviewers Prof. Dr. Sujin Bureerat Khon Kaen University, Thailand

Prof. Dr.-Ing. Heinz Peter Berg

Brandenburg University of Technology Cottbus-Senftenberg, Germany

Prof. Dr. Sakamon Devahastin King Mongkut's Univ. of Technology Thonburi, Thailand

Prof. Dr. Ashwani K. Gupta University of Maryland, USA

Prof. Dr. Somchai Hanklar Navaminda Kasatriyadhuraj Royal Air Force Academy, Thailand

Prof. Dr. Chaosuan Kanchanomai Thammasat Univeristy, Thailand

Prof. Dr.-Ing. Lothar Kroll Chemnitz University of Technology, Germany

Prof. Dr. Suwat Kuntanapreeda King Mongkut's Univ. of Technology North Bangkok, Thailand

Prof. Dr. Navadol Laosiripojana King Mongkut's Univ. of Technology Thonburi, Thailand

Prof. Dr. Thananchai Leephakpreeda Thammasat University, Thailand

Prof. Dr. Shinichi Nakasuka

University of Tokyo, Japan

Prof. Dr. Marco P. Schoen

Idaho State University, USA

Prof. Dr. Apichai Therdthianwong King Mongkut's Univ. of Technology Thonburi, Thailand

Assoc.Prof. Dr. Nopdanai Ajavakom Chulalongkorn University, Thailand

Assoc.Prof. Dr. Wanchai Asvapoositkul King Mongkut's Univ. of Technology Thonburi, Thailand

Assoc.Prof. Dr. Asi Bunyajitradulya Chulalongkorn University, Thailand

Assoc.Prof. Dr. Somchai Chanchaona King Mongkut's Univ. of Technology Thonburi, Thailand

Assoc.Prof. Dr. Jarruwat Charoensuk King Mongkut Institute of Technology Ladkrabang, Thailand

Assoc.Prof. Dr. Sinchai Chinvorarat King Mongkut's Univ. of Technology North Bangkok, Thailand

Assoc.Prof. Dr. Dulyachotk Cholaseu Thammasat Univeristy, Thailand


Bangkok, Thailand

7

Assoc.Prof. Dr. Supachart Chungpaibulpatana Thammasat University, Thailand

Assoc.Prof. Dr. Smith Eiamsa-ard Mahanakorn University of Technology, Thailand

Assoc.Prof. Dr. Chonlathis Eiamworawutthikul Sripatum University, Thailand

Assoc.Prof. Dr. Thira Jearsiripongkul Thammasat Univeristy, Thailand

Assoc.Prof. Dr. Pattaramon Jongpradist King Mongkut's Univ. of Technology Thonburi, Thailand

Assoc.Prof. Dr. Varangrat Juntasaro Kasetsart University, Thailand

Assoc.Prof. Dr. Ekachai Juntasaro King Mongkut's Univ. of Technology North Bangkok, Thailand

Assoc.Prof. Dr. Vejapong Juttijudata Kasetsart University, Thailand

Assoc.Prof. Dr. Pudit Laksanacharoen King Mongkut's Univ. of Technology North Bangkok, Thailand

Assoc.Prof. Dr. Anirut Matujak Uborajathani University, Thailand

Assoc.Prof. Dr. Pinit Ngamsom Rangsit University, Thailand

Assoc.Prof. Dr. Otsin Nilubol Navaminda Kasatriyadiraj Royal Air Force Academy, Thailand

Assoc.Prof. Dr. Sutthisak Phongthanapanich King Mongkut's Univ. of Technology North Bangkok, Thailand

Assoc.Prof. Dr. Gumpon Prateepchaikul Prince of Songkla University, Thailand

Assoc.Prof. Dr. Rungthip Puntumetakul Khon Kaen University, Thailand

Assoc.Prof. Dr. Pairod Singhatanadgid Chulalongkorn University, Thailand

Assoc.Prof. Dr. Thanakom Soontornchainacksaeng King Mongkut's Univ. of Technology North Bangkok, Thailand

Assoc.Prof. Dr. Thanarath Sriveerakul Ubon Ratchathani University, Thailand

Assoc.Prof. Dr. Ratchaphon Suntivarakorn Khon Kaen University, Thailand

Assoc.Prof. Dr. Vitoon Uthaisangsuk King Mongkut's Univ. of Technology Thonburi, Thailand

Asst.Prof. Dr. Sappinandana Akamphon Thammasat Univeristy, Thailand

Asst.Prof. Dr. Panya Aroonjarattham Mahidol University, Thailand

8

Asst.Prof. Dr. Julaporn Benjapiyaporn Khon Kaen University, Thailand

Asst.Prof. Dr. Arisara Chaikittiratana King Mongkut's Univ. of Technology North Bangkok, Thailand

Asst.Prof. Dr. Chawin Chantharasenawong King Mongkut's Univ. of Technology Thonburi, Thailand

Asst.Prof. Dr. Tonkid Chantrasmi King Mongkut's Univ. of Technology North Bangkok, Thailand

Asst.Prof. Dr. Sarocha Charoenvai Rajamangaly Univ. of Technology Thanyaburi, Thailand

Asst.Prof. Dr. Surapong Chatpun Prince of Songkla University, Thailand

Asst.Prof. Dr. Suvanit Chitsiriphanit King Mongkut's Univ. of Technology North Bangkok, Thailand

Asst.Prof. Dr. Sathaporn Chuepeng Kasetsart University, Thailand

Asst.Prof. Dr. Kunnayut Eiamsa-ard Kasetsart University, Thailand

Asst.Prof. Dr. Jaruwat Jareanjit Rajamangala University of Technology Srivijaya, Thailand

Asst.Prof. Dr. Petch Jearanaisilawong King Mongkut's Univ. of Technology North Bangkok, Thailand

Asst.Prof. Dr. Puttha Jeenkour Burapha University, Thailand

Asst.Prof. Dr. Krit Jiamjiroch Thammasat University, Thailand

Asst.Prof. Dr. Jirapong Kasivitamnuay Chulalongkorn University, Thailand

Asst.Prof. Dr. Thosapon Katejanekarn Silpakorn University, Thailand

Asst.Prof. Dr. Pornthip Keangin Mahidol University, Thailand

Asst.Prof. Dr. Preecha Khantikomol Rajamangala University of Technology Isan, Thailand

Asst.Prof. Dr. Kittisak Khuwaranyu Silpakorn University, Thailand

Asst.Prof. Dr. Bundit Krittacom Rajamangala University of Technology Isan, Thailand

Asst.Prof. Dr. Apiwat Muttamara Thammasat University, Thailand

Asst.Prof. Dr. Suthum Patumsawad King Mongkut's Univ. of Technology North Bangkok, Thailand

Asst.Prof. Dr. Alognkorn Pimpin Chulalongkorn University, Thailand

9

Asst.Prof. Dr. Monsak Pimsarn King Mongkut Institute of Technology Ladkrabang, Thailand

Asst.Prof. Dr. Boonrit Prasartkaew Rajamangaly University of Technology Thanyaburi, Thailand

Asst.Prof. Dr. Chamras Promptmas Mahidol University, Thailand

Asst.Prof. Dr. Chanat Ratanasumawong Chulalongkorn University, Thailand

Asst.Prof. Dr. Annop Ruangviset King Mongkut's Univ. of Technology Thonburi, Thailand

Asst.Prof. Dr. Bunyong Rungroungdouyboon Thammasat Univeristy, Thailand

Asst.Prof. Dr. Mana Saedan Chiang Mai University, Thailand

Asst.Prof. Dr. Suwimon Saneewong Na Ayuttaya Chulachomklao Royal Military Academy, Thailand

Asst.Prof. Dr. Malee Santikunaporn Thammasat Univeristy, Thailand

Asst.Prof. Dr. Prasan Sathitruangsak Mahanakorn University of Technology, Thailand

Asst.Prof. Dr. Wirapan Seehanam Ubon Ratchatani University, Thailand

Asst.Prof. Dr. Werayut Srituravanich Chulalongkorn University, Thailand

Asst.Prof. Dr. Anotai Suksangpanomrung Thammasat University, Thailand

Asst.Prof. Dr. Jackrit Suthakorn Mahidol University, Thailand

Asst.Prof. Dr. Chakrit Suvanjumrat Mahidol University, Thailand

Asst.Prof. Dr. Nuchida Suwapaet Mahasarakham University, Thailand

Asst.Prof. Dr. Sirivit Taechajedcadarungsri Ubon Ratchathani University, Thailand

Asst.Prof. Dr. Prachasanti Thaiyasuit Ubonratchathani University, Thailand

Asst.Prof. Dr. Kampanart Theinnoi King Mongkut's Univ. of Technology North Bangkok, Thailand

Asst.Prof. Dr. Ananchai Ukaew Naresuan University, Thailand

Asst.Prof. Dr. Pumyos Vallikul King Mongkut's Univ. of Technology North Bangkok, Thailand

Asst.Prof. Dr. Thanapat Wanichanon Mahidol University, Thailand

10

Asst.Prof. Dr. Sarawoot Watechagit Mahidol University, Thailand

Asst.Prof. Dr. Boonchai Watjatrakul King Mongkut's Univ. of Technology North Bangkok, Thailand

Asst.Prof. Dr. Teerapot Wessapan Eastern Asia University, Thailand

Asst.Prof. Dr. Prasatporn Wongkamchang Royal Thai Air Force Academy, Thailand

Asst.Prof. Dr. Hataitep Wongsuwarn Kasetsart University Kampangsean Campus, Thailand

Asst. Prof. Dr. Pisit Yongyingsakthavorn King Mongkut's Univ. of Technology North Bangkok, Thailand

Dr. Rattana Borrisutthekul Suranaree University of Technology

Dr. Sumet Heamawatanachai Naresuan University, Thailand

Dr. Pakpong Jantapremjit Burapha University, Thailand

Dr. Amornrat Kaewpradap King Mongkut's Univ. of Technology Thonburi, Thailand

Dr. Waraporn Klinbun Panyapiwat Institute of Management, Thailand

Dr. Pramote Laipradit Burapha University, Thailand

Dr. Punyawan Lumpaopong Naresuan University, Thailand

Dr. Usa Makmool King Mongkut's University of Technology Thonburi, Thailand

Dr. Sukit Nitinai Rajamangala University of Technology Krungthep, Thailand

Dr. Jitti Pattavanitch Burapha University, Thailand

Dr. Piyamon Poapongsakorn Suranaree University of Technology, Thailand

Dr. Montana Rungsiyopas Burapha University, Thailand

Dr. Saran Salakij Chulalongkorn University, Thailand

Dr. Thada Suksila King Mongkut's Univ. of Technology North Bangkok, Thailand

Dr. Nattawut Suwannapum Rajamangala University of Technology Rattanakosin, Thailand

Dr. Mason Thammawichai Royal Thai Air Force Academy, Thailand

11

Dr. Makatar Wae-hayee Prince of Songkla University, Thailand

Dr. Denchai Woradechjumroen Sripatum University, Thailand

Dr. Thanan Yomchinda Defence Technology Institute, Thailand

Mr. Ratthasak Prommas Rajamangla University of Technology Rattanakosin, Thailand

Mr. Niwat Suksam Rajamangala University of Technology Rattanakosin, Thailand

12

Honorary Speaker

The Role of DAAD Support in Fostering Mechanical Engineering Capacity for Development 13 December 2017, 09:00-09:20, Arnoma Grand Room

Mr. Stefan Bienefeld Head of Development Cooperation and Transregional Programs German Academic Exchange Service (DAAD)

Keynote Speakers

Microturbine- and Turbo-Fuel-Cell Technology for Highly Effective Generation of Electricity -- Example of an International Technology Transfer Supported by the DAAD 13 December 2017, 09:35-10:00, Arnoma Grand Room

Univ.-Prof. Dr.-Ing. Heinz Peter Berg Chair of Combustion Engines and Flight Propulsion, Brandenburg University of Technology Cottbus-Senftenberg, Germany

Abstract. The development of decentralized energy supply systems and structures has received an increasingly important role in the recent years. Construction of new large-scale and base-load power plants will no longer take place in liberalized energy markets because of economic and political reasons and for the sake of acceptance. In this context, the development of flexible power plants with maximum efficiencies is inevitable. Hybridization of energy production processes is a very promising approach, because the various pros and cons of each individual process are in this case optimally combined and thus the disadvantages are decreased. One possibility is the combination of the electrochemical SOFC (Solid Oxide Fuel Cell) process with the recuperated Joule-process. The possible potential of this combination has been shown in various papers and is not the focus of this presentation. In the examples presented, the international technological transfer supported by DAAD (German Academic Exchange Service) and the cooperation with KMUTNB (King Mongkut's University of Technology North Bangkok) is shown on the field of MGT (Micro Gas Turbine), which provides the basic technology for the hybrid application of future MGT-SOFC systems. This future highly efficient energy converters are called by the network partners “Turbo-Fuel-Cell”.

The international cooperation between the Department of Mechanical and Aerospace Engineering (MAE) at KMUTNB, Brandenburg University of Technology (BTU) and industrial partners is also presented in the research and education field of MGT-Technology and the planed Turbo-Fuel Cell system. This team is working closely together in the education, research and technology realization supported by the DAAD in the University-Business-Partnership Program with a focal on the MGT-Technology.


Bangkok, Thailand

13

The developed MGT is an advanced turbo machinery technology in combination with foil bearing. This technology is necessary for the realization of a “Turbo-Fuel-Cell”-process (MGT-SOFC system) with a long life time and less operating costs. Foil bearings are an innovative solution for small size, high speed high temperature turbo machinery. In addition, the SOFC-technology is another important key technology. Here, the SOFC stacks are integrated instead of the combustion chamber in the MGT process. Because of the combination between this advanced turbo machinery process and embedded SOFC stacks, the system has a high dynamic response (100kW/s) and a very high effective efficiency of 68% with a future potential of nearly 80%.

The presentation also highlights the importance of this technology for the future of habitats and mobility. Biography. Heinz Peter Berg founded the Chair Combustion Engines and Flight Propulsion and the Institute of Transport Engineering at the Brandenburg Technical University in 1997. Since then he has been a full university professor and company founder.

He has worked in various executive functions of cooperating development companies and research institutes for 25 years. He started his professional career as an academic associate and scientist at the Technical University Darmstadt in 1982. After the degree as an Dr.-Ing. of the Technical University Darmstadt, he was a founding team member of BMW Rolls Royce GmbH (now Rolls-Royce Deutschland). At BMW Rolls-Royce (from 1991), he directed the test program area, the fluid dynamic test department, the aerothermal test department and the whole section for engine component testing of all international divisions. During this period the first German turbojet engine (BR 700 family) after the second world war was designed, developed, built and certified.

In the time periode 1997-2005 Prof. Dr. Berg was Vice-President of the Brandenburg Research & Development Company and Engineering Cooperation Center GmbH. From 2005 until now he was founder and share-holder in a variety number of technology-oriented companies, which are integrated into a technology network. Since 1997 he is a full Univ.-Professor, a member of various technology organizations, an expert (e.g. DFG, SFB) and entrepreneur.

In addition to the research and development field of combustion engines and flight propulsion systems, Prof. Berg is very concerned with future technologies in the field of energy conversion and the network creation of international institutions.

Micro/nano/pico-satellite Challenge for Novel Space Development and Utilization 13 December 2017, 10:00-10:25, Arnoma Grand Room

Prof. Dr. Shinichi Nakasuka Department of Aeronautics and Astronautics, University of Tokyo, Japan

Abstract. University of Tokyo already developed 8 satellites, and seven of them were launched and operated successfully in space. Two CubeSat “XI-IV (2003)” and “XI-V (2005)” were primarily for space engineering education and pico-bus demonstration, but from the third satellite “PRISM” we have been challenging towards more practical applications. PRISM aimed at obtaining 30 m GSD Earth remote sensing images, which was actually achieved in 2009. Our fourth satellite “Nano-JASMINE,” which is now waiting for launch, has “astrometry” mission to obtain very precise 3D map of more than 400,000 stars in space. From 2010, I lead a nationwide micro-satellite project named “Hodoyoshi Project,” through which, three Earth remote sensing satellites “Hodoyoshi-1,3,4” were launched in 2014 by Russian rocket “DNEPR,” which showed excellent performance of taking Earth images of 6m, 40m and 240m GSD. We are now seeking practical applications of these images for agriculture, forestry, fishery, disaster monitoring, etc. Based on the bus technologies developed in Hodoyoshi Project, in December 2014, we launched the world first 50kg class deep space probe “PROCYON,” which escaped from the Earth gravitational field, and various observation and experiment were conducted successfully in deep space. Based on the obtained deep space technologies, we started development of 6U CubeSat “EQUULEUS” targeting towards Earth Lunar Lagrange Point 2, with the planned launch by NASA’s SLS rocket in 2019.

14

In my talk, I will first show the features of micro/nano/pico-satellites, followed by the University of Tokyo’s history of development and in-orbit operation results of series of micro/nano/pico-satellites. In the latter part, I will describe current and future visions of applying these satellites to various practical missions, including space science and exploration, Earth observation, entertainment, and education support program. Biography. Prof. Nakasuka graduated from University of Tokyo in 1983 and got Ph.D in 1988. He joined IBM Research during 1988-1990, and then worked for Department of Aeronautics and Astronautics, University of Tokyo as a lecturer in 1990, as an Associate Professor in 1993, and became a Professor in 2004. He developed and launched seven micro/nano/pico-satellites successfully. He is a member of JSASS, SICE, and IAA, and the Chairperson of IFAC Aerospace Technical Committee and UNISEC-GLOBAL. He has been a member of Space Policy Committee of Japanese Cabinet Office since 2012.

Kaizen Approach to Smart Manufacturing for Connected Industries 13 December 2017, 10:45-11:10, Arnoma Grand Room

Prof. Dr. Yasuyuki Nishioka Department of Engineering and Design Faculty of Engineering and Design, Hosei University, Japan President of the Industrial Value Chain Initiative

Abstract. Manufacturing industry is facing tremendous changes in digitization. From a system integration viewpoint, approaches toward manufacturing digitization are usually on a top-down basis. It could be true that an optimized production system can be specified in the cyber world. However, factory floor’s reality sometime refuses such sophisticated systems. On the other hand, Japanese production management usually make a decision based on fact-based reality. This fact-based and case-based system thinking creates valuable outcomes with respect to quality and productivity. So-called Kaizen is a typical example of a bottom-up approach for smart manufacturing.

This talk, first, shows the Industrial Value Chain Reference Architecture (IVRA), which various kinds of factories can refer to improve performance with respect to digitized manufacturing. IVRA consists of Smart Manufacturing Units (SMUs) and Portable Loading Units (PLUs). SMU has three views: asset view, management view, activity view. Kaizen approach can be realized in the activity view of an SMU where PDCA cycles perform for continuous improvement.

In order to implement IoT/ICT system in a manufacturing enterprise, it is necessary to keep interoperability among IoT devices, applications, data storages, and related tools. In order to achieve interoperability among such digital components, IVRA also addresses reference models of IVI platforms. The concept of Loosely Defined Standard (LDS) is applied in management of interoperability between IVI components, in which data commonality cannot be fixed unless improvement of the system as a whole is terminated. Using LDS, IVRA allows the factory managers to describe scenarios of daily operations and inter-relations between actors. Then an SMU can be defined as a set of models including Actor, Activity, Thing, Information, Logic and Data. The talk also illustrates the procedure of bottom-up system improvement of a cyber-physical SMU. Factory floor managers, production engineers and chiefs of workers make some operational scenarios from their actual concerns. Then the scenarios are redesigned using data and logics in the cyber world. Assigning appropriate services provided by platform component suppliers to the data and logics, an IVI platform gives interoperability framework to those components.

Industrial Value Chain Initiative (IVI) provides a software tool, IVI modeler, to all the members for describing and sharing scenario models, IVI modeler is used by working groups to draw four kinds of diagrams. This tool performs well for facilitating common understanding and defining scenarios and terms. Models defined by the IVI modeler can play a key role in integrating the physical world and cyber world. In other words, a matching system between platform components and the practical operational scenarios is implemented by those models.

Finally, this talk discusses a platform ecosystem framework. In order to make collaboration and win-win relation among platformers, component suppliers, system integrators and factory managers, general rules of profile specification and distribution are identified. Since the platformers and component suppliers have their own data models and interfaces, IVI proposes a profile publication framework and a common dictionary for specifying the

15

profiles in accordance with the concept of LDS. Many future possibilities of cross industrial collaboration are also discussed in the concluding remarks. Biography. Yasuyuki Nishioka received Bachelor of Engineering from Waseda University in 1985, Master of Engineering from University of Tsukuba in 1992 and Doctor of Philosophy from University of Tokyo in 1996. He is currently a professor in the Department of Engineering and Design at Hosei University, Japan. Since 2015, Prof. Nishioka has been President of the Industrial Value Chain Initiative.

Technology Fusion in Series Production of Lightweight Structures 13 December 2017, 11:10-11:35, Arnoma Grand Room Dipl.-Ing. Michael Heinrich Federal Cluster of Excellence “MERGE Technologies for Multifunctional Lightweight Structures,” Chemnitz University of Technology, Germany Director of Competence Centre for Lightweight Structures, Chemnitz, Germany

Abstract. Research in production technology is currently being driven by mega-trends such as industry 4.0, resource efficiency, circular economy, human-machine interaction and demographic change. Therefore, issues relating to economic sustainability, future working and living environments, big data and human effected production processes are at the forefront of this research. The creative scope for possible technology combinations and interactions has in-creased significantly due to the paradigm shift that is occurring in production technology with regard to holistic approaches and sustainability. Therefore, the newly developed technology variants investigated in MERGE provide an excellent basis for new research approaches. For example, the sensor integration technologies tested in MERGE open up new paths of communication to aid greater understanding of material, energy and information flows with the involvement of people across the entire life cycle of lightweight structures.

Networking digital functionalisation technologies with existing analogue production processes pursued in the MERGE Cluster aim to equip components with sensors across the board to depict the entire life cycle. A configurable information feedback between production parameters and the resulting component properties in the use phase provides the basis for detailed product and process optimisation for multifunctional lightweight structures. To expand upon this, interfaces between virtual and real-life processes will be researched, based on multi-criteria algorithms with a view to creating self-learning systems.

Biography. Michael Heinrich, became his diploma (Dipl.-Ing.) for mechanical engineering, especially for lightweight structure and polymer technology, in 2004 at the Chemnitz University of Technology (CUT), Germany. He stays at the Institute of Lightweight Structures (Head: Prof. Dr.-Ing. habil. Lothar Kroll) at the CUT and make his Ph.D.-thesis on the effects of micro injection molded composites based on carbon nano tubes for electrical contacting of piezo ceramics. Furthermore, since 2008, he is leader of Competence Centre for Lightweight Structures. Since 2015, he is research assistant at the Research Centre for Textile Semi-finished Products and Preforms (STEX) at Fraunhofer-Institute for Machine Tools and Forming Technology (IWU), Germany. He also has been in the Scientific Management Board of the Federal Cluster of Excellence “MERGE Technologies for Multifunctional Lightweight Structures” (MERGE), established at CUT, since 2017. From 2004 until now, more than 50 articles, proceedings and patents have been published.

16

Lessons Learned from KNACKSAT Satellite 13 December 2017, 11:35-12:00, Arnoma Grand Room

Prof. Dr. Suwat Kuntanapreeda Department of Mchanical and Aerospace Engineering, Faculty of Engineering, King Mongkut’s University of Technology North Bangkok, Thailand

Abstract. KNACKSAT, an acronym for KMUTNB Academic Challenge of Knowledge SATellite, is a 1U-CubeSat satellite (roughly 10 x 10 x 10 cm, 1.3 kg) developed by King Mongkut’s University of Technology North Bangkok (KMUTNB). Since September 2015, the KNACKSAT project has been funded by Broadcasting and Telecommunications Research and Development Fund for the Public Interest, Office of The National Broadcasting and Telecommunications Commission (NBTC), Thailand. It’s the first satellite entirely built in Thailand, entirely by a university team. The satellite will be launched into a 575-km sun-synchronous orbit in 2018. The communication between the satellite station and the ground station is based on amateur radio frequencies. The main mission of KNACKSAT include (1) developing a communication system using amateur radio frequencies, (2) taking images from space, (3) testing 3-axis attitude control algorithms by using magnetic torquers, (4) verifying a deorbit technology by a magnetic torque and (5) confirming the uses of Commercial Off-The-Shelf (COTS) components in space. But the larger objectives of the KNACKSAT project might be even more important: the educational and technology demonstration objectives. The educational objectives is to enhance the knowledge and experience of the students in satellite design and construction. On a national level, the project inspires and promotes interest in science and technology for young Thais.

The KNACKSAT project started without prior in-house experience. However, from developing all subsystems in-house, the team has gained valuable experiences that can be considered as fundamentals for development of larger satellites in Thailand in the near future.

In my talk, I will first present some relevant histories and then introduce the KNACKSAT project. Last, I will share the lessons learned from more than two years of development. The lessons are identified from both point of view of engineering and management. Biography. Suwat Kuntanapreeda received the B. Eng. degree in Mechanical Engineering from King Mongkut’s University of Technology North Bangkok (KMUTNB), Thailand in 1990, and the M.S. and Ph.D. degrees in Mechanical Engineering from Utah State University, USA in 1992 and 1995, respectively. He is currently a professor in the Department of Mechanical and Aerospace Engineering at KMUTNB.

Fuel Upgrading to Cleaner and High Value Fuels 14 December 2017, 10:40-11:00, Arnoma II

Prof. Dr. Ashwani K. Gupta Department of Mechanical Engineering University of Maryland, College Park, MD 20742, USA

Abstract. Clean energy harvesting from various kinds of feedstocks is a challenge but recent research and development efforts show a novel fuel reforming path that can be used in a wide variety of industries extending from commercial to aerospace application. Fuels of different physical and chemical properties could be made available, however, they must be tailored for specific applications. In addition it is important that we effectively and efficiently use low grade fuels and reform them to cleaner fuels, such as wastes and biomass to hydrogen and methane. Carbon dioxide is a greenhouse gas that is known to contribute to global warming. Although there are other contributors to global warming but the share of CO2 is significant. Most of the CO2 is produced from the combustion of fossil fuels and our use of fossil fuels has been increasing due to increased activity and population.

17

The carbon during the combustion process is converted to CO2 with the subsequent release of thermal energy. In many parts of the world most of the electricity is produced from fossil fuels, with coal being the highest. The demand for electricity continues to grow in the developed countries with significant more in some of the developing countries. This has resulted in dramatic increase in global ambient concentrations of CO2. Significant efforts are being pursued to curtail the emission of CO2 or capture and store it in order to maintain the ambient concentrations to some acceptable levels.

This talk will focus on reforming wastes and biomass to clean energy with due consideration to energy sustainability, global climate change and mitigation of greenhouse gases emission to the environment. The emphasis will be on sustainability with due considerations to efficiency and fuels used in different energy using sectors. Carbon emissions continue to increase through the increase use of fossil fuels but fossil fuels offer are near carbon neutral. . Gasification and pyrolysis are important steps to reform the fuel properties so that they can be used in the current energy conversion systems for various energy and power use with due consideration to environmental impact. Gasification results from a lab scale reactor and its effect on syngas yield and characteristics will be provided using different feedstock materials. Biography. Ashwani Gupta is a Distinguished University Professor at the University of Maryland, College Park, USA. He received his PhD from the University of Sheffield, and higher doctorate (DSc) from the University of Sheffield and also from the University of Southampton, UK. He received Honorary doctorate from the University of Wisconsin Milwaukee, King Mungkut University of Technology North Bangkok, and University of Derby, UK. He is Honorary Fellow of ASME and Fellow of AIAA, SAE, AAAS and RAeS (UK). He is co-editor of Environmental and Energy Science book series by CRC Press and Associate editor of 4 journals. He served as Director of Propulsion and Energy group at AIAA and also a member of Board of Directors at AIAA. He has received several honors and awards and several best paper awards from AIAA, ASME. At the University of Maryland he received President Kirwan award and College of engineering research award. He has published over 700 technical papers, 3 books and edited 13 books. His research interests include high intensity distributed combustion, HiTAC, swirl flows, combustion, sulfur chemistry, wastes and biomass to energy, biofuels, high speed flows and mixing, advanced diagnostics and miniature sensors, and air pollution.

18

Invited Speakers

Topic Speaker

An Innovative Porous Medium Burner: A Disruptive Technology for Combustion in the 21st Century 13 December 2017, 15:00-15:20, Arnoma II

Prof. Dr. Sumrerng Jugjai King Mongkut's University of Technology Thonburi, Thailand

Minimally Invasive Surgical Training System with Force Feedback 13 December 2017, 15:00-15:20, Thip-ubol

Asst. Prof. Dr. Jackrit Suthakorn Mahidol University, Thailand

Serveillance by Aerial Gimbal 13 December 2017, 15:00-15:20, Pathummas

Assoc. Prof. Dr. Prasatporn Wongkamchang Navaminda Kasatriyadhiraj Royal Air Force Academy, Thailand

Waste to Fuel : The use of diesel from municipal waste plastic in BMTA buses 14 December 2017, 09:00-09:20, Arnoma II

Assoc. Prof. Dr. Kanit Wattanavichien Chulalongkorn University, Thailand

Optimum Allocation of Heating Surfaces in Sugar Juice Evaporation System 14 December 2017, 09:00-09:20, Arnoma III

Prof. Dr. Somchart Chantasiriwan Thammasat University, Thailand

Biomass Gasification Research for Thai Ceramic Industry 14 December 2017, 09:00-09:20, Pathummas

Prof. Dr. Nakorn Tippayawong Chiang Mai University, Thailand

Gas-Liquid Two-Phase Flows in Micro and Mini Channels 14 December 2017, 09:00-09:20, Sarocha

Prof. Dr. Somchai Wongwises King Mongkut's University of Technology Thonburi, Thailand

Numerical Heat Transfer Analysis in Heat Exchangers with Vortex Generators 14 December 2017, 13:00-13:20, Arnoma III

Assoc. Prof. Dr. Pongjet Promvonge King Mongkut’s Institute of Technology Ladkrabang, Thailand


Bangkok, Thailand

19

Conference Program

12 December 2017 Registration @ 1st Floor Foyer

13:00 - 18:00 Registration/Networking

13 December 2017 Registration @ 3rd Floor Foyer

08:00 - 08:30 Registration/Networking

Conference Opening and Keynote Speeches @ Arnoma Grand Room

08:30 - 09:00

Welcome Speech by Prof. Dr. Suwat Kuntanapreeda and Assoc. Prof. Dr. Sinchai Chinvorarat

Conference Co-chairs Department of Mechanical and Aerospace Engineering,

King Mongkut's University of Technology North Bangkok (KMUTNB) Prof. Dr.-Ing.habil. Suchart Siengchin

President, King Mongkut's University of Technology North Bangkok (KMUTNB) Asst. Prof. Dr. Chinda Charoenphonphanich

President, Thai Society of Mechanical Engineers (TSME) Prof. Dr. Mari Oshima

President, Japan Society of Mechanical Engineers (JSME)

09:00 - 09:20

Honorary Speaker Mr. Stefan Bienefeld

Head of Development Cooperation and Transregional Programs German Academic Exchange Service (DAAD)

The role of DAAD support in fostering Mechanical Engineering Capacity for Development

09:20 - 09:35 Ribbon Cutting Ceremony

09:35 - 10:00

Keynote Speaker Univ.-Prof. Dr.-Ing. Heinz Peter Berg

Chair of Combustion Engines and Flight Propulsion Brandenburg University of Technology Cottbus-Senftenberg, Germany

Microturbine- and Turbo-Fuel-Cell Technology for Highly Effective Generation of Electricity -- Example of an International Technology Transfer

Supported by the DAAD


Bangkok, Thailand

20

13 December 2017 (Cont.)

10:00 - 10:25

Keynote Speaker Prof. Dr. Shinichi Nakasuka

Department of Aeronautics and Astronautics University of Tokyo, Japan

Micro/nano/pico-satellite Challenge for Novel Space Development and Utilization

10:25 - 10:45 Coffee Break

10:45 - 11:10

Keynote Speaker Prof. Dr. Yasuyuki Nishioka

Department of Engineering and Design, Faculty of Engineering and Design Hosei University, Japan

Kaizen Approach to Smart Manufacturing for Connected Industries

11:10 - 11:35

Keynote Speaker Dipl.-Ing. Michael Heinrich

Federal Cluster of Excellence “MERGE Technologies for Multifunctional Lightweight Structures”

Chemnitz University of Technology, Germany Technology Fusion in Series Production of Lightweight Structures

11:35 - 12:00

Keynote Speaker Prof. Dr. Suwat Kuntanapreeda

Department of Mechanical and Aerospace Engineering, Faculty of Engineering King Mongkut's University of Technology North Bangkok, Thailand

Lessons Learned from KNACKSAT Satellite

12:00 - 13:00 Lunch Session 1 (See Program Details on Page 213)

@ Arnoma I Arnoma II Arnoma III Thip-ubol Pathummas Sarocha

13:00 - 13:20 AMM0005 AEC0002 CST0001 DRC0002 AME0004 TSF0001




14:20 - 14:40 AMM0004 AEC0019 CST0005 DRC0008 AME0009


Session 2 (See Program Details on Page 214)@ Arnoma I Arnoma II Arnoma III Thip-ubol Pathummas Sarocha

15:00 - 15:20 AMM0010 Invited Spkr. CST0009 Invited Spkr. Invited Spkr. TSF0006





16:40 - 17:00 AMM0002 CST0015 DRC0029 AMM0020 TSF0011

21

14 December 2017 Session 3 (See Program Details on Page 216)


09:00 - 09:20 BME0001 Invited Spkr. Invited Spkr. DRC0017 Invited Spkr. Invited Spkr.

09:20 - 09:40 BME0002 AEC0013 CST0016 DRC0019 ETM0002 TSF0012




Session 4 (See Program Details on Page 218) @ Arnoma I Arnoma II Arnoma III Thip-ubol Pathummas Sarocha

10:40 - 11:00 AMM0017 Keynote Spkr. BME0003 DRC0005 AME0001 TSF0015

11:00 - 11:20 AMM0018 AEC0015 BME0007 DRC0021 AME0003 TSF0017

11:20 - 11:40 AMM0019 AEC0017 BME0006 CST0020 AME0013 TSF0019

11:40 - 12:00 AMM0022 BME0011 CST0022 AME0014 TSF0025

12:00 - 13:00 Lunch

Session 5 (See Program Details on Page 219) @ Arnoma I Arnoma II Arnoma III Thip-ubol Pathummas Sarocha

13:00 - 13:20 AMM0021 IEI0001 Invited Spkr. DRC0004 ETM0007 TSF0022

13:20 - 13:40 AMM0023 EDU0002 CST0023 DRC0022 ETM0008 TSF0020



14:20 - 14:40 AMM0026 EDU0001 CST0024 DRC0026 ETM0012

14:40 - 15:00 EDU0005 CST0025 DRC0027 ETM0005

15:00 - 16:00 Poster Session @ 3rd Floor Foyer (ASEAN0001-0010, DRC0014)/Coffee Break

16:30 - 18:00 Move to Pier: Buses leave from the hotel parking lot

18:00 - 21:00 TSME Annual General Meeting & Banquet Dinner on a Cruise

15 December 2017 Session 6 (See Program Details on Page 222)


09:00 - 09:20 AMM0003 AEC0008 CST0003 DRC0001 BME0004 TSF0002



10:00 - 10:20 AMM0014 AEC0001 CST0021 DRC0012 ETM0006 TSF0021

10:20 - 10:40 AME0002 AEC0016 CST0004 DRC0015 ETM0004

10:40 - 11:00 AME0007 DRC0018 ETM0011


11:20 - 12:00 Closing Remarks and Awarding Ceremony @ Arnoma II

12:00 - 13:00 Farewell Lunch

13:00 - 16:00 Excursion Trip (Registered Participants)

22

Conference Venue

Arnoma Grand Hotel 99 Ratchadamri Road, Pathumwan

Bangkok 10330, Thailand


Bangkok, Thailand

23

24

Abstract Contents

Page

Alternative Energy and Combustion (AEC)

AEC0001 Parametric optimization of application of 2 Ethyl Hexyl-Nitrate on partial substitution of ethanol in diesel for fuel economy and emission control

37

AEC0002 Production of charcoal briquettes from biomass for community use 38

AEC0003 Study on the micro direct ethanol fuel cell (Micro-DEFC) performance 39

AEC0004 Numerical modeling of down draft gasification process using specified temperature profile.

40

AEC0005 Research of interaction between technological and material parameters during densification of sunflower hulls

41

AEC0006 Effect of fuel injection ratio on partially premixed combustion of ethanol blends

42

AEC0007 Effect of temperature and steam on hydrogen production and producer gas quality from MSW steam gasification

43

AEC0008 The Turbo-Fuel-Cell 1.0-family concept: Compact Micro Turbine-Solid Oxide Fuel Cell (SOFC) energy converters in the 100-500 kW electrical power range for the future

44

AEC0009 Performance and emission analysis of single cylinder SI engine using bioethanol-gasoline blend produced from Salvinia Molesta

45

AEC0010 Ignition improvement by injector arrangement in a multi-fuel-combustor for micro gas turbine

46

AEC0011 Phase behavior and important fuel properties of diesel-palm fatty acid distillate-anhydrous ethanol blends

47

AEC0012 Microwave pre-heating of Asphalt recycling process 48

AEC0013 Investigation of methane combustion flames diluted by carbon dioxide on non-premixed burner

49


Bangkok, Thailand

25

Page

AEC0014 A study on comparison of flame speed in combustion the biomass fuels in a fixed-bed

50

AEC0015 Hydrothermal carbonization of rice husk for fuel upgrading 51

AEC0016 Effect of bluff body and swirl plate on pulverized biomass combustion performance

52

AEC0017 Bio-diesel fuel (BDF) synthesis by using solid catalyst based on ultrasonic irradiation

53

AEC0018 Catalytic hydrothermal liquefaction of sugar cane leaf in an ethanol -water Co-Solvent

54

AEC0019 Development of the compaction machine for the production of new shapes of pressed biofuels

55

Automotive, Aerospace and Marine Engineering (AME)

AME0001 Experimental investigation of solid rocket motors for small sounding rockets

56

AME0002 Design of Power System for KNACKSAT Satellite 57

AME0003 Development of a hardware-in-loop attitude control simulator for a CubeSat satellite

58

AME0004 Measurement of the NOx emission of light diesel vehicles in real road driving by PEMS

59

AME0005 On verifying magnetic dipole moment of a magnetic torquer by experiments 60

AME0006 Deterioration diagnosis of Li-ion battery with AC impedance measurement analysis

61

AME0007 Morphology and oxidation kinetics of particulate matters using TGA 62

AME0008 Viscous investigation on a flapping-foil propulsor 63

AME0009 Effects of carbon fiber stacking sequence on torsional stiffness per weight ratio of formula student semi-monocoque chassis structure.

64

AME0010 Vision-based target geo-location using a multirotor vehicle 65

AME0011 The combustion characteristics of diesel engine burned with auxiliary gaseous fuels

66

AME0012 Design of optimum contra-rotating propellers under slipstream contraction condition

67

26

Page

AME0013 An investigation on the spray characteristics of an 800KPa CNG injector 68

AME0014 Development of forward collision warning system using laser scanner with camera to detect and estimate object headway distance

69

AME0016 Investigation of horizontal-axis wind turbine wake phenomena 70

Applied Mechanics, Materials and Manufacturing (AMM)

AMM0002 Application of grey-fuzzy approach in parametric optimization of EDM process in machining of MDN 300 steel

71

AMM0003 Fatigue behavior of resistance spot welded high strength steel sheets with different nugget sizes

72

AMM0004 Dynamic properties modeling of carbon black filled rubber 73

AMM0005 Development and comparison of processing maps of Mg-3Sn-1Ca alloy from data obtained in tension versus compression

74

AMM0006 Compressive behavior of Sulcata Tortoise's carapace at high rate of deformation

75

AMM0007 Nanoindentation tests of Sulcata Tortoise's carapace 76

AMM0008 Evaluation of tensile strength and consideration of the rope structure of net for super-pressure balloon.

77

AMM0009 Characteristics of acoustic emission from corrosion in anticorrosive coated steel

78

AMM0010 Development of the novel non-contact AE sensor using air-coupled ultrasonic transducer for plates and cylinders

79

AMM0011 Development of the evaluation method for the surface condition of spur gears using AE method

80

AMM0012 The method for detecting damages of wire cables using guided waves 81

AMM0013 Development of feedback-speed-control system of fixed-abrasive tool for mat-surface fabrication

82

AMM0014 Study of heating and cooling temperature of injection molding to effect on gloss of plastic injection parts

83

AMM0015 Dry sliding wear behavior of Fe-Cr-Mo-C steel by nickel addition 84

27

Page

AMM0016 Roughness and compressive strength of FDM 3D printed specimens affected by acetone vapour treatment

85

AMM0017 Study on tool wear characteristics of precision cutting in the ductile iron FCD600

86

AMM0018 Examination of drilling for small-diameter holes in aluminum alloys 87

AMM0019 Examination of cutting edges shape on multi-facet-tool in ultra-precision cutting

88

AMM0020 Material selection and assembly method of battery pack for compact electric vehicle

89

AMM0021 Changes in the hardness and microstructures of severely deformed β-titanium alloys

90

AMM0022 Characterization of hemp yarn with alkaline surface treatment for polymer matrix composite applications

91

AMM0023 Experimental investigations of density-induced segregation in binary granular mixtures under vertical vibrations

92

AMM0024 A comparison of mechanical properties between plasma arc welding (PAW) and four popular type of welding process (SMAW GMAW FCAW GTAW) on dissimilar materials

93

AMM0025 Surface roughness determination and comparison of parts printed using different additive manufacturing techniques

94

AMM0026 Compressive deformation behavior of meso pillar fabricated from magnesium Alloy AZ 80

95

Biomechanics and Bioengineering (BME) BME0001 The evaluation of labral repair affect hip joint by finite element analysis 96

BME0002 Numerical modeling of the influence of stromal cells on tumor growth and angiogenesis

97

BME0003 Numerical simulation of the hair formation - modeling of hair cycle 98

BME0004 Particle simulation on the skin formation: -melanin transportation and formation freckles -

99

BME0005 The development of lab-on-a-chip fabricated from two different molds 100

BME0006 Kinematic analysis and trajectory of a dog-like robot 101

BME0007 Performance study of knee supports by electromyography (EMG) testing 102

28

Page

BME0008 Mass diffusion coefficient measurement for vitreous humor using FEM and MRI

103

BME0009 The strain distribution on varus knee corrected by close wedge High Tibial Osteotomy (HTO) and supplemented by closing-wedge Distal Femoral Osteotomy (DFO)

104

BME0010 Improved design of a cone-shaped rotating disk for shear force loading in a cell culture plate

105

BME0011 A Potential approach to prepare virtual iris and sclera for custom-made ocular prosthesis using UV-printer

106

Computation and Simulation Techniques (CST) CST0001 Analysis of thermo-mechanical stress on welding electrode by using finite

element method 107

CST0002 Comparison of two methods to determine fan performance curves using computational fluid dynamics

108

CST0003 Comparison of thermal degradation area on a small automotive lamp by using ray tracing method and Monte Carlo radiation model

109

CST0004 Numerical investigation of saw-toothed and sine-curved tailing edge shape of NACA0012 aerofoil

110

CST0005 Influence of saw-toothed and sine-curved tailing edge shape to the asymmetric aerofoil

111

CST0006 Free vibration analysis of functionally graded sandwich beams with elastically constrained ends

112

CST0007 CFD model of a packed-bed reactor with sulfide oxidizing bacteria 113

CST0008 Modification and Validation of a Rigid Hybrid III 50th Male Dummy Model under Crash Test

114

CST0009 CFD modelling of a membrane reactor for hydrogen production from ammonia

115

CST0010 Large Eddy Simulation of turbulence induced secondary flows in stationary and rotating straight square ducts

116

CST0011 Prediction of thermal characteristics of turbulent spot using Large Eddy Simulation

117

CST0012 A rotary drum dryer for palm sterilization: preliminary study of flow and heat transfer using CFD

118

29

Page

CST0013 Numerical investigation into segregation of agricultural seeds during filling and discharge flow in silos

119

CST0014 The development of rotary drum dryer for palm fruit sterilization 120

CST0015 Performance and accuracy investigation of the closed form quadrilateral element for heat conduction problem

121

CST0016 The evolution of homogeneous isotropic turbulence in background rotation 122

CST0017 The wavelet-based artificial neural network for state of charge estimation in lithium ion battery

123

CST0018 Prediction and validation of underwater shock wave peak pressure generated by explosion and electrical discharge methods

124

CST0019 Investigation on performance of two-stage ejector in the steam ejector refrigeration by CFD simulation

125

CST0020 Parametric system identification of catamaran for improving controller design

126

CST0021 Innovative engineering systems design using adaptive multi-fidelity concepts

127

CST0022 Multi-body dynamics simulation of tension on chain link plate under basic conveyor chain system for rubber gloves industry

128

CST0023 Experimental and numerical investigations of heat transfer and thermal efficiency of an infrared gas stove

129

CST0024 Hot air impingement on a flat plate using Large Eddy Simulation (LES) technique

130

CST0025 CFD modeling of wall heat transfer inside a combustion chamber using ANSYS-forte

131

CST0026 Analysis of temperature profile and electric field in natural rubber glove due to microwave heating : effects of waveguide position

132

Dynamic Systems, Robotics and Controls (DRC) DRC0001 Finite-time stabilization of chaotic gyros based on a homogeneous

supertwisting-like algorithm 133

DRC0002 An analytical comparison of optimal output transition and polynomial trajectories

134

DRC0003 Development of a standing up mechanism during falling down for small size home robots

135

30

Page

DRC0004 Two models for identification and predicting behavior of an induction motor system

136

DRC0005 System identification using Nuclear Norm & Tabu Search optimization 137

DRC0006 A dynamic neural network based implementation of an MPC algorithm applied in the control system of an electromechanical plant

138

DRC0007 Spherical beamforming for spherical array with impedance surface 139

DRC0008 Software-in-the-loop simulation of a quad-copter portion for hybrid aircraft control

140

DRC0009 Railway bogie vibration analysis by mathematical simulation model and a scaled four-wheel railway bogie set

141

DRC0010 Adjustable magnetic force system for climbing robot 142

DRC0011 Design and development of grasping behavior control strategy for EMG-controlled robotic hand

143

DRC0012 Enhanced control of a flexure-jointed micromanipulation system using a vision-based servoing approach

144

DRC0013 Backstepping boundary control: an application to vibration suppression of flexible beam

145

DRC0014 Study on design of light-weight super-abrasive wheel 146

DRC0015 Interface for electric wheelchair with tension athetosis type cerebral palsy 147

DRC0016 Study of 3D-printed robot with mobility 148

DRC0017 Development master arm of 2-DOF planar parallel manipulator for In-Vitro Fertilizations

149

DRC0018 Vibration analysis of baby carriage running on a road having grooves at regular intervals

150

DRC0019 Lane detection using Randomized Hough Transform 151

DRC0020 External force/velocity control for an autonomous rehabilitation robot 152

DRC0021 Gesture-based interface of robot arm "Udero" for upper limb dysfunction 153

DRC0022 Multiple products management system with sensors arrays in automated storage and retrieval systems

154

DRC0023 Guidance system for mobile robot 155

DRC0024 PID control for one dimensional magnetic levitation 156

31

Page

DRC0025 Optimal trajectory design for robotic arm 157

DRC0026 A study on parameter optimization for passive vibration damping system by giant magnetostrictive material

158

DRC0027 Study on controller design of a flexible link manipulator using wave based control method

159

DRC0028 Localized damping identification using relative phase of nearfield acoustics

160

DRC0029 Speech controlled RoboQuad 161

Engineering Education (EDU) EDU0001 Multicultural design education 162

EDU0002 Project collaboration between art and science students as a venue for engineering design education

163

EDU0003 Transferring experience labs for production engineering students to universities in newly industrialized countries

164

EDU0004 Mind maps learning for advanced engineering study: case study in system synamics

165

EDU0005 Comparing the engineering program feeders from SiF and convention models

166

Energy Technology and Management (ETM) ETM0001 Performance characteristics of the Savonius turbine 167

ETM0002 A parametric simulation of solar chimney power plant 168

ETM0003 Energy consumption analysis for electric campus tram design based on real university driving cycle pattern in Thailand

169

ETM0004 A novel direct-fired porous-medium boiler 170

ETM0005 Efficiency improvement of a concentrated solar receiver for water heating system using porous medium

171

ETM0006 Optimum building performance scores when applying different ECM sorting schemes

172

ETM0007 Electric motorcycle charging station powered by solar energy 173

32

Page

ETM0008 Controlling of aggregate split-type air-conditioners under the thermal comfort conditions for energy management

174

ETM0009 Experimental study on the drying of natural latex medical gloves 175

ETM0010 Investigations of faulty interaction effect to refrigeration system operations 176

ETM0011 Possibility study of gasifier with axial circulating flue gas for reducing Tar 177

ETM0012 Study on light and thermal energy of illumination device for plant factory design

178

Industrial Entrepreneurship (IEI) IEI0001 Improvement for enhancing effectiveness of universal power system

(UPS) continuous testing process 179

Thermal System and Fluid Mechanics (TSF) TSF0001 Experimental study on the heat transfer enhancement of the effect of

teardrop protrusion-to-protrusion spacing 180

TSF0002 Flows developing around a finite rotating disk enclosed by a cylindrical casing

181

TSF0003 Design and development of a demonstration unit for the magnetic refrigeration system

182

TSF0004 Adhesive effect of polymer solutions in filament stretching flow 183

TSF0005 Multi-flow modes between co-rotating disks in casing by numerical analysis and experiment

184

TSF0006 Validation of CFD simulation of recoilless EOD water cannon by firing experiments with high speed camera

185

TSF0007 Analysis on thermal condition for a person sitting near a glass window 186

TSF0008 Empirical modeling of liquid film thickness in vertical annular gas-liquid two-phase flow

187

TSF0009 Heat transfer enhancement underneath the inline merging turbulent spots 188

TSF0010 On characteristics of jet from two-dimensional nozzle with a lip 189

TSF0011 Thermal performance improvement in a heat exchanger tube using punched delta-winglet vortex generators

190

33

Page

TSF0012 Flow and heat transfer around the flat plate installed in a pulsating duct flow with intermittent flow rate fluctuation

191

TSF0013 Fundamental study on flow-deflector performance for diffuser 192

TSF0014 Effect of seawater flow rate and evaporation temperature on performance of Sherbet type ice making machine

193

TSF0015 Performance characteristics of hybrid cooling system based on cooling pad and evaporator

194

TSF0016 Influence of superheated steam flow rate on improved degreasing of oily metal waste

195

TSF0017 Calcium granules drying using air flow through technic 196

TSF0018 Effects of mesh type on a non-premixed model in a flameless combustion simulation

197

TSF0019 Study on a Stirling cycle machine as a household refrigerator - the technical points and prospects for practical use

198

TSF0020 Heat transfer characteristics of a cooling jacket with double spiral paths for ball screws

199

TSF0021 The study of aerodynamic transition phenomenon of a finite wing at low Reynolds number

200

TSF0022 Optical diagnostics for fluid mechanics research from planar (2D3C PIV) to volumetric (Tomo-PIV) measurements

201

TSF0023 Dynamic behavior of vortices rolled up from a heaving elastic airfoil by a FSI simulation

202

TSF0024 Heat transfer enhancement of flow insulator by combined stainless steel fibrous and wire net porous materials

203

TSF0025 Numerical analysis of rectangular two phase natural circulation loop 204

ASEAN Session (ASEAN) ASEAN01 Optimal trajectory design for robotic arm 157

ASEAN02 Surface roughness determination and comparison of parts printed using different additive manufacturing techniques

94

ASEAN03 Optimization of biodiesel production from mixed waste cooking oil with Calophyllum inophyllum

205

ASEAN04 Evaluation of the periodicity of inaccessible rough surfaces by ultrasonic backscatter

206

34

Page

ASEAN05 Spark ignition timing controller to actuate artificial misfire condition 207

ASEAN06 New urban bus transport in Yangon, Myanmar 208

ASEAN07 The elder alarm product for better communication 209

ASEAN08 Vehicle acceleration controller design based on parallel neural network PID 210

ASEAN09 Car detection and classification using cascaded method 211

ASEAN10 A study on catalytic converter for emission reduction of motorcycle engine 212

35

36

-

-

. . .

.

* : - . . . . . ( ) . ( )

. - .

( ) - . U U ) . . .

. - . / . -

. %

U = . / . .

% - .

-

-

’.

. . . . : .:

.

-

.

.

.

-

65

,

,

-

-

119

-

: . . . .

. -- . -

.

. - - .

-.

-

-

.

E_RMS

E_RMS

7

*

*

* : . .

.

( ) . ( ) .

- .

.

.

.

.

.

-

-

Experimental study on the drying of natural latex medical gloves

Mano Chankrachang1, Pisit Yongyingsakthavorn1, Atitaya Tohsan2, and Udomkiat Nontakaew1, *

1 Department of Mechanical & Aerospace Engineering, Faculty of Engineering, King Mongkut's University of Technology North Bangkok, Bangkok, 10800, Thailand 2 Department of Materials and Production Technology Engineering, Faculty of Engineering, King Mongkut's University of Technology North Bangkok Bangkok, 10800, Thailand

* Corresponding Author: [email protected]

Abstract. The purpose of this research was to study latex film drying at 70 ºC using a laboratory drying oven. Two different total solid content (TSC) latex compounds, which 45% TSC and 35% TSC were used. The undried latex films were prepared according to the common procedures used in latex gloves manufacturers, that is, by dry coagulant dipping process. The experimental results such as initial moisture content, the amount of moisture and drying time of latex films in each latex compound formula were determined. After that, the results were projected to calculate on the production capacity expand by 1 million piece/day of natural latex medical gloves. Finally, the rate of moisture entering the latex drying oven and the energy consumption of the drying oven were estimated. The results indicated that when the 35% TSC of latex compound was used. The initial moisture content of latex film was higher than 45% TSC of latex compound about 7%. The drying time of 35% TSC was longer than 45% TSC for 2.5 min and consume more energy about 10%. As a result, the 45% TSC latex compound was the better way to saving energy and managing humidity in the production line. Therefore, it was found to very useful to an approximate design length and size of actual of latex drying oven and the rate of moisture entering the oven as well.


Bangkok, Thailand

ETM0009

175

-

r- r-z

et al

h h h h h hh h

Flow and heat transfer around the flat plate installed in a pulsating duct flow with intermittent flow rate fluctuation

M. Kotani1 and H. Saitoh2,*

1 Graduate School of Engineering, Division of Mechanical Engineering, Sojo University, Ikeda 4-22-1, West Ward, Kumamoto City, 860-0082 Japan 2 Department of Mechanical Engineering, Sojo University, Ikeda 4-22-1, West Ward,

Kumamoto City, 860-0082 Japan * Corresponding Author: E-mail: [email protected], Tel: +81-96-326-3729, Fax: +81-96-323-1351

Abstract. This study deals with flow behavior and associated heat transfer in a pulsating duct flow. In our previous studies, effect of continuous sinusoidal flow rate fluctuation on heat transfer and flow behavior around the flat plate installed in a duct was experimentally investigated. In these papers the authors concluded that heat transfer enhancement or no impact of pulsation effect on heat transfer depends on the increase or constant of time-averaged local flow rate around the flat plate induced by flow pulsation. Based on this knowledge obtained in the previous studies, heat transfer rate on the flat plate installed in pulsating duct flow can be controlled under several parameters combination. As the next step, focusing on the pulsation mode, we examined a pulsating duct flow with intermittent flow rate fluctuation. Flow rate change was realized by valve motions inside the flow passage that electronically controlled by a servo motor connected with a ball screw actuator. Combined effects of time averaged flow rate, pulsating amplitude and pulsating frequency on flow and heat transfer around the flat plate in a duct was experimentally investigated. Heat transfer characteristics on the flat plate were evaluated based on both the temperature measurement and visualization of thermal boundary layer. Within the examined conditions, results showed no impact on heat transfer in the case of intermittent flow rate change. In order to make clear what sort of flow behavior attributed to such heat transfer characteristics, flow visualization and PIV analysis were carried out. Time averaged velocity around the flat plate was approximately the same as steady flow even when strong flow instabilities at the inlet of the passage was occurred.


Bangkok, Thailand

TSF0012

191

. * . .

’( )

-

* : - : . : +

. .

. .

.

. .

.

. .

.

-

VenueTime Paper ID

13:00 - 13:20 AMM0005

13:20 - 13:40 AMM0008

13:40 - 14:00 AMM0009

14:00 - 14:20 AMM0015

14:20 - 14:40 AMM0004

VenueTime Paper ID

13:00 - 13:20 AEC0002

13:20 - 13:40 AEC0003

13:40 - 14:00 AEC0005

14:00 - 14:20 AEC0004

14:20 - 14:40 AEC0019

VenueTime Paper ID

13:00 - 13:20 CST0001

13:20 - 13:40 CST0002

13:40 - 14:00 CST0006

14:00 - 14:20 CST0007

14:20 - 14:40 CST0005

VenueTime Paper ID

13:00 - 13:20 DRC0002

13:20 - 13:40 DRC0003

13:40 - 14:00 DRC0006

14:00 - 14:20 DRC0011

14:20 - 14:40 DRC0008

VenueTime Paper ID

13:00 - 13:20 AME0004

13:20 - 13:40 AME0005

13:40 - 14:00 AME0006

14:00 - 14:20 AME0008

14:20 - 14:40 AME0009

VenueTime Paper ID

13:00 - 13:20 TSF0001

13:20 - 13:40 TSF0003

13:40 - 14:00 TSF0004

14:00 - 14:20 TSF0005

14:20 - 14:40

14:40 - 15:00

VenueTime Paper ID

15:00 - 15:20 AMM0010

15:20 - 15:40 AMM0011

15:40 - 16:00 AMM0012

16:00 - 16:20 AMM0013

16:20 - 16:40 AMM0016

16:40 - 17:00 AMM0002

VenueTime Paper ID

15:00 - 15:20 Invited Spkr.

15:20 - 15:40 AEC0006

15:40 - 16:00 AEC0009

16:00 - 16:20 AEC0010

16:20 - 16:40 AEC0007

16:40 - 17:00

VenueTime Paper ID

15:00 - 15:20 CST0009

15:20 - 15:40 CST0011

15:40 - 16:00 CST0012

16:00 - 16:20 CST0013

16:20 - 16:40 CST0014

16:40 - 17:00 CST0015

VenueTime Paper ID


15:20 - 15:40 DRC0013

15:40 - 16:00 DRC0007

16:00 - 16:20 DRC0016

16:20 - 16:40 DRC0028

16:40 - 17:00 DRC0029

VenueTime Paper ID


15:20 - 15:40 AME0010

15:40 - 16:00 AME0011

16:00 - 16:20 AME0012

16:20 - 16:40 AME0016

16:40 - 17:00 AMM0020

VenueTime Paper ID

15:00 - 15:20 TSF0006

15:20 - 15:40 TSF0007

15:40 - 16:00 TSF0008

16:00 - 16:20 TSF0009

16:20 - 16:40 TSF0010

16:40 - 17:00 TSF0011

On characteristics of jet from two-dimensional nozzle with a lip

S. Ysasuda, R. Ogura, Y. Otomine and K. Hirata

Performance improvement in a tubular heat exchanger by punched delta-winglet vortex generators

C. Khanoknaiyakarn, P. Promvonge, C. Thianpong, and S. Skullong

Analysis on thermal condition for a person sitting near a glass window

Somsak Chaiyapinunt1, and Nopparat Khamporn

Empirical modeling of liquid film thickness in vertical annular gas-liquid two-phase flow

Netchanok Thiabsi and Saran Salakij

Heat transfer enhancement underneath inline merging turbulent spots

Sudarat Srichan, Jirachai Mingbunjerdsuk, and Weerachai Chaiworapuek

Material selection and assembly method of battery pack for compact electric vehicle

N. Lewchalermwong, M. Masomtob, V. Lailuck and C. Charoenphonphanich

SarochaTitle Authors

Validation of CFD simulation of recoilless EOD water cannon by firing experiments with high speed camera

Tonkid Chantrasmi, Premsiri Hongthong and Manop Kongkaniti

The combustion characteristics of diesel engine burned with auxiliary gaseous fuels

Ruei-Huan Tsai, Ren Chi Liao and Jau-Huai Lu

Design of optimum contra-rotating propellers under slipstream contraction condition

Nattanun Subsamart, Chirdpun Vitooraporn

Investigation of horizontal-axis wind turbine wake phenomena

Ryo Amano, R.S. Jackson

PathummasTitle Authors

Serveillance by Aerial Gimbal Assoc. Prof. Dr. Prasatporn Wongkamchang

Vision-based target geo-location using a multirotor vehicle

Jeerasak Moudpoklang

Study of 3D-printed robot with mobility Hiroyuki Momoki and Daigo Misaki

Localized damping identification of a flat plate using relative phase of nearfield acoustics

Pitiphong Atibodhi, Chak Chantalakhana

Speech controlled RoboQuadNay Thaw Htoo, Than Lin,Htet Phone Naing, Palavinnege Cumaranatunga and Manukid Parnichkun

Minimally Invasive Surgical Training System with Force Feedback

Asst. Prof. Dr. Jackrit Suthakorn

Backstepping boundary control: an application to the suppression of flexible beam vibration

Nipon Boonkumkrong, Pichai Asadamongkon, Sinchai Chinvorarat

Spherical beamforming for spherical array with impedance surface

Khemapat Tontiwattanakul

The development of rotary drum dryer for palm fruit sterilization

S. Hanifarianty, A. Legwiriyakul, A. Alimalbari, C. Nuntadusit, T. Theppaya, and M. Wae-Hayee

Performance and accuracy investigation of the closed-form quadrilateral element for heat conduction problem

Benjapa Yontsakul, Pramote Dechaumphai, and Niphon Wansophark

Thip-ubolTitle Authors

Prediction of thermal characteristics of turbulent spot using Large Eddy Simulation

Warakorn Pichitpreecha, Jirachai Mingbunjerdsuk, and Weerachai Chaiworapuek

A rotary drum dryer for palm sterilization: preliminary study of flow and heat transfer using CFD

S. Hanifarianty, A. Legwiriyakul, A. Alimalbari, C Nuntadusit, T. Theppaya, and M. Wae-Hayee

Numerical investigation into the segregation of agricultural seeds during filling and discharge flow in silos

Sathaphon Wangchai

Arnoma IIITitle Authors

CFD modelling of a membrane reactor for hydrogen production from ammonia

San Shwe Hla and Michael D. Dolan

Performance and emission analysis of single cylinder SI engine using bioethanol-gasoline blend produced from Salvinia Molesta

Priyank Gupta, Partha Protim Das, M. Mubarak, A. Shaija

Ignition improvement by injector arrangement in a multi-fuel combustor for micro gas turbine

O. Antoshkiv, T. Poojitganont, S. Jeansirisomboon and H. P. Berg

Effect of temperature and steam on hydrogen production and producer gas quality from MSW steam gasification

N. Sirirermrux, K. Laohalidanond, and S. Kerdsuwan

Title AuthorsAn Innovative Porous Medium Burner: A Disruptive Technology for Combustion in the 21st Century

Prof. Dr. Sumrerng Jugjai

Effect of fuel injection ratio on partially premixed combustion of ethanol blends

Ronnachart Munsin, Pietro Pinazzi, Fabrice Foucher, Ida Truedsson and Christine Mounaïm-Rousselle

Application of grey-fuzzy approach in parametric optimization of EDM process in machining of MDN 300 steel

Partha Protim Das, P. Gupta1, S Das, B. B. Pradhan, S. Chakraborty

Roughness and compressive strength of FDM 3D printed specimens affected by acetone vapour treatment

Juraj Beniak, Peter Križan, Ľubomír Šooš and Miloš Matúš

Arnoma II

Development of the evaluation method for the surface condition of spur gears using AE method

K. Sugiyama, and T. Matsuo

The method for detecting damages of wire cables using guided waves

S. Ozono and T. Matsuo

Development of feedback-speed-control system of fixed-abrasive tool for mat-surface fabrication

K. Yanagihara and R. Kita

Session 2Arnoma I

Title AuthorsDevelopment of the novel non-contact AE sensor using air-coupled ultrasonic transducer for plates and cylinders

Taiki Oki , Daisuke Hatanaka , and Takuma Matsuo

Adhesive effect of polymer solutions in filament stretching flow

Takashi Koshiba and Takehiro Yamamoto

Multi-flow modes between co-rotating disks in casing by numerical analysis and experiment

R. Uenishi, T. Watanabe, H. Tanigawa, and K. Hirata

Coffee Break


Experimental study on the heat transfer enhancement of the effect of teardrop protrusion-to-protrusion spacing

O. Yemin, M. Wae-Hayee, and C. Nuntadusit

Design and development of a demonstration unit for the magnetic refrigeration system

R.Prapainop and S.Jarungthammachote

Deterioration diagnosis of Li-ion battery with AC impedance measurement analysis

Toshiyuki Sakamoto

Viscous investigation of a flapping foil propulsor Attapol Posri, Surasak Phoemsapthawee, and Nonthipat Thaweewat

Effects of carbon fiber stacking sequence on torsional stiffness per weight ratio of formula student semi-monocoque chassis structure.

Tanic Leunanonchai, Kitchanon Ruangjirakit, and Surachate Chutima


Measurement of the NOx emission of light diesel vehicles in real road driving by PEMS

Deng-Siang Jhang, and Jau-Huai Lu

On verifying magnetic dipole moment of a magnetic torquer by experiments

Aekjira Kuyyakanont, Suwat Kuntanapreeda and Nisai H. Fuengwarodsakul

A neural network based implementation of an MPC algorithm applied in the control systems of electromechanical plants

Piotr M. Marusak and Suwat Kuntanapreeda

Design and development of grasping behaviour control strategy for EMG-controlled robotic hand

Anwar Rajawana, Paramin Neranon, Pornchai Phukpattaranont, and Kittikhun Thongpull

Software-in-the-loop simulation of a quad-copter portion for hybrid aircraft control

Shoaib Mansoor, Mana Saedan


An analytical comparison of optimal output transition and Polynomial trajectories

Arom Boekfah

Development of a standing up mechanism during falling down for small size home robots

Nobuhiro Ushimi, Masafumi Honda, and Rikuki Ikeda

Free vibration analysis of functionally graded sandwich beams with elastically constrained ends

Prapot Tossapanon, Nuttawit Wattanasakulpong

CFD model of a packed-bed reactor with sulfide oxidizing bacteria

Chatchai Udomsomboonphol, Saroch Boonvakitsombut, and Wishsanuruk Wechsatol

Influence of saw-toothed and sine-curved trailing edge shape to asymmetric aerofoil

Pakpong Jantapremjit, Pareecha Rattanasiri,Alongkod Tipsiri, Tana arkadumnuay, Wannachat Truekhakit and Philip A. Wilson


Analysis of thermo-mechanical stress on welding electrode by using finite element method

Suphaphon S., Keerati S.

Comparison of two methods to determine fan performance curves using computational fluid dynamics

Patinya Onma, and Tonkid Chantrasmi

Research of interaction between technological and material parameters during densification of sunflower hulls

Peter Križan, Miloš Matúš,Juraj Beniak and Ľubomír Šooš

Numerical modeling of down draft gasification process using specified temperature profile

Kasemsil Onthong, Dachdanai Boobchauy, Kittipass Wasinarom and Jarruwat Charoensuk

Development of the compaction machine for the production of new shapes of pressed biofuels

Ľubomír Šooš , Miloš Matúš, Juraj Beniak and Peter Križan

Details of Parallel Session Program13 December 2017

Session 1

Arnoma IITitle Authors

Production of charcoal briquettes from biomass for community use

Suttibak S. and Loengbudnark. W.

Study on the micro direct ethanol fuel cell (Micro-DEFC) performance

Penyarat Saisirirat, and Bordindech Joommanee

B. Nakornpun, V. Uthaisangsuk, M. Morakotjinda, P. Wila, N. Tosangthum, T. Yotkaew, N. Ohtake and R. Tongsri

Dynamic properties modeling of carbon black filled rubber

Kasem Janma and Niwat Moonpa

Arnoma IAuthorsTitle

Development and comparison of processing maps of Mg-3Sn-1Ca alloy from data obtained in tension versus compression

K.P. Rao, K. Suresh, Y.V.R.K. Prasad and N. Hort

Evaluation of tensile strength and consideration of the rope structure of net for super-pressure balloon

R. Tanaka, T. Matsuo, Y. Saito, D. Akita, K. Nakashino, and K. Goto

Characteristics of acoustic emission from corrosion in anticorrosive-coated steel

T. Kagami, and T. Matsuo

Dry sliding wear behavior of Fe-Cr-Mo-steel by nickel addition

213

VenueTime Paper ID

13:00 - 13:20 AMM0005

13:20 - 13:40 AMM0008

13:40 - 14:00 AMM0009

14:00 - 14:20 AMM0015

14:20 - 14:40 AMM0004

VenueTime Paper ID

13:00 - 13:20 AEC0002

13:20 - 13:40 AEC0003

13:40 - 14:00 AEC0005

14:00 - 14:20 AEC0004

14:20 - 14:40 AEC0019

VenueTime Paper ID

13:00 - 13:20 CST0001

13:20 - 13:40 CST0002

13:40 - 14:00 CST0006

14:00 - 14:20 CST0007

14:20 - 14:40 CST0005

VenueTime Paper ID

13:00 - 13:20 DRC0002

13:20 - 13:40 DRC0003

13:40 - 14:00 DRC0006

14:00 - 14:20 DRC0011

14:20 - 14:40 DRC0008

VenueTime Paper ID

13:00 - 13:20 AME0004

13:20 - 13:40 AME0005

13:40 - 14:00 AME0006

14:00 - 14:20 AME0008

14:20 - 14:40 AME0009

VenueTime Paper ID

13:00 - 13:20 TSF0001

13:20 - 13:40 TSF0003

13:40 - 14:00 TSF0004

14:00 - 14:20 TSF0005

14:20 - 14:40

14:40 - 15:00

VenueTime Paper ID

15:00 - 15:20 AMM0010

15:20 - 15:40 AMM0011

15:40 - 16:00 AMM0012

16:00 - 16:20 AMM0013

16:20 - 16:40 AMM0016

16:40 - 17:00 AMM0002

VenueTime Paper ID


15:20 - 15:40 AEC0006

15:40 - 16:00 AEC0009

16:00 - 16:20 AEC0010

16:20 - 16:40 AEC0007

16:40 - 17:00

VenueTime Paper ID

15:00 - 15:20 CST0009

15:20 - 15:40 CST0011

15:40 - 16:00 CST0012

16:00 - 16:20 CST0013

16:20 - 16:40 CST0014

16:40 - 17:00 CST0015

VenueTime Paper ID


15:20 - 15:40 DRC0013

15:40 - 16:00 DRC0007

16:00 - 16:20 DRC0016

16:20 - 16:40 DRC0028

16:40 - 17:00 DRC0029

VenueTime Paper ID


15:20 - 15:40 AME0010

15:40 - 16:00 AME0011

16:00 - 16:20 AME0012

16:20 - 16:40 AME0016

16:40 - 17:00 AMM0020

VenueTime Paper ID

15:00 - 15:20 TSF0006

15:20 - 15:40 TSF0007

15:40 - 16:00 TSF0008

16:00 - 16:20 TSF0009

16:20 - 16:40 TSF0010

16:40 - 17:00 TSF0011














































Sathaphon Wangchai


















Arnoma II







Session 2Arnoma I







Coffee Break







Toshiyuki Sakamoto

















Arom Boekfah





















Session 1

















214

VenueTime Paper ID

13:00 - 13:20 AMM0005

13:20 - 13:40 AMM0008

13:40 - 14:00 AMM0009

14:00 - 14:20 AMM0015

14:20 - 14:40 AMM0004

VenueTime Paper ID

13:00 - 13:20 AEC0002

13:20 - 13:40 AEC0003

13:40 - 14:00 AEC0005

14:00 - 14:20 AEC0004

14:20 - 14:40 AEC0019

VenueTime Paper ID

13:00 - 13:20 CST0001

13:20 - 13:40 CST0002

13:40 - 14:00 CST0006

14:00 - 14:20 CST0007

14:20 - 14:40 CST0005

VenueTime Paper ID

13:00 - 13:20 DRC0002

13:20 - 13:40 DRC0003

13:40 - 14:00 DRC0006

14:00 - 14:20 DRC0011

14:20 - 14:40 DRC0008

VenueTime Paper ID

13:00 - 13:20 AME0004

13:20 - 13:40 AME0005

13:40 - 14:00 AME0006

14:00 - 14:20 AME0008

14:20 - 14:40 AME0009

VenueTime Paper ID

13:00 - 13:20 TSF0001

13:20 - 13:40 TSF0003

13:40 - 14:00 TSF0004

14:00 - 14:20 TSF0005

14:20 - 14:40

14:40 - 15:00

VenueTime Paper ID

15:00 - 15:20 AMM0010

15:20 - 15:40 AMM0011

15:40 - 16:00 AMM0012

16:00 - 16:20 AMM0013

16:20 - 16:40 AMM0016

16:40 - 17:00 AMM0002

VenueTime Paper ID


15:20 - 15:40 AEC0006

15:40 - 16:00 AEC0009

16:00 - 16:20 AEC0010

16:20 - 16:40 AEC0007

16:40 - 17:00

VenueTime Paper ID

15:00 - 15:20 CST0009

15:20 - 15:40 CST0011

15:40 - 16:00 CST0012

16:00 - 16:20 CST0013

16:20 - 16:40 CST0014

16:40 - 17:00 CST0015

VenueTime Paper ID


15:20 - 15:40 DRC0013

15:40 - 16:00 DRC0007

16:00 - 16:20 DRC0016

16:20 - 16:40 DRC0028

16:40 - 17:00 DRC0029

VenueTime Paper ID


15:20 - 15:40 AME0010

15:40 - 16:00 AME0011

16:00 - 16:20 AME0012

16:20 - 16:40 AME0016

16:40 - 17:00 AMM0020

VenueTime Paper ID

15:00 - 15:20 TSF0006

15:20 - 15:40 TSF0007

15:40 - 16:00 TSF0008

16:00 - 16:20 TSF0009

16:20 - 16:40 TSF0010

16:40 - 17:00 TSF0011














































Sathaphon Wangchai


















Arnoma II







Session 2Arnoma I







Coffee Break







Toshiyuki Sakamoto

















Arom Boekfah





















Session 1

















215

VenueTime Paper ID

13:00 - 13:20 AMM0005

13:20 - 13:40 AMM0008

13:40 - 14:00 AMM0009

14:00 - 14:20 AMM0015

14:20 - 14:40 AMM0004

VenueTime Paper ID

13:00 - 13:20 AEC0002

13:20 - 13:40 AEC0003

13:40 - 14:00 AEC0005

14:00 - 14:20 AEC0004

14:20 - 14:40 AEC0019

VenueTime Paper ID

13:00 - 13:20 CST0001

13:20 - 13:40 CST0002

13:40 - 14:00 CST0006

14:00 - 14:20 CST0007

14:20 - 14:40 CST0005

VenueTime Paper ID

13:00 - 13:20 DRC0002

13:20 - 13:40 DRC0003

13:40 - 14:00 DRC0006

14:00 - 14:20 DRC0011

14:20 - 14:40 DRC0008

VenueTime Paper ID

13:00 - 13:20 AME0004

13:20 - 13:40 AME0005

13:40 - 14:00 AME0006

14:00 - 14:20 AME0008

14:20 - 14:40 AME0009

VenueTime Paper ID

13:00 - 13:20 TSF0001

13:20 - 13:40 TSF0003

13:40 - 14:00 TSF0004

14:00 - 14:20 TSF0005

14:20 - 14:40

14:40 - 15:00

VenueTime Paper ID

15:00 - 15:20 AMM0010

15:20 - 15:40 AMM0011

15:40 - 16:00 AMM0012

16:00 - 16:20 AMM0013

16:20 - 16:40 AMM0016

16:40 - 17:00 AMM0002

VenueTime Paper ID


15:20 - 15:40 AEC0006

15:40 - 16:00 AEC0009

16:00 - 16:20 AEC0010

16:20 - 16:40 AEC0007

16:40 - 17:00

VenueTime Paper ID

15:00 - 15:20 CST0009

15:20 - 15:40 CST0011

15:40 - 16:00 CST0012

16:00 - 16:20 CST0013

16:20 - 16:40 CST0014

16:40 - 17:00 CST0015

VenueTime Paper ID


15:20 - 15:40 DRC0013

15:40 - 16:00 DRC0007

16:00 - 16:20 DRC0016

16:20 - 16:40 DRC0028

16:40 - 17:00 DRC0029

VenueTime Paper ID


15:20 - 15:40 AME0010

15:40 - 16:00 AME0011

16:00 - 16:20 AME0012

16:20 - 16:40 AME0016

16:40 - 17:00 AMM0020

VenueTime Paper ID

15:00 - 15:20 TSF0006

15:20 - 15:40 TSF0007

15:40 - 16:00 TSF0008

16:00 - 16:20 TSF0009

16:20 - 16:40 TSF0010

16:40 - 17:00 TSF0011














































Sathaphon Wangchai


















Arnoma II







Session 2Arnoma I







Coffee Break







Toshiyuki Sakamoto

















Arom Boekfah





















Session 1

















Venue

Time Paper ID

09:00 - 09:20 BME0001

09:20 - 09:40 BME0002

09:40 - 10:00 BME0009

10:00 - 10:20 BME0010

Venue

Time Paper ID


09:20 - 09:40 AEC0013

09:40 - 10:00 AEC0014

10:00 - 10:20 AEC0012

Venue

Time Paper ID


09:20 - 09:40 CST0016

09:40 - 10:00 CST0017

10:00 - 10:20 CST0018

Venue

Time Paper ID

09:00 - 09:20 DRC0017

09:20 - 09:40 DRC0019

09:40 - 10:00 DRC0020

10:00 - 10:20 DRC0024

Venue

Time Paper ID


09:20 - 09:40 ETM0002

09:40 - 10:00 ETM0003

10:00 - 10:20 ETM0001

Venue

Time Paper ID


09:20 - 09:40 TSF0012

09:40 - 10:00 TSF0013

10:00 - 10:20 TSF0014

10:20 - 10:40

Venue

Time Paper ID

10:40 - 11:00 AMM0017

11:00 - 11:20 AMM0018

11:20 - 11:40 AMM0019

11:40 - 12:00 AMM0022

Venue

Time Paper ID

10:40 - 11:00 Keynote Spkr.

11:00 - 11:20 AEC0015

11:20 - 11:40 AEC0017

11:40 - 12:00

Venue

Time Paper ID

10:40 - 11:00 BME0003

11:00 - 11:20 BME0007

11:20 - 11:40 BME0006

11:40 - 12:00 BME0011

Venue

Time Paper ID

10:40 - 11:00 DRC0005

11:00 - 11:20 DRC0021

11:20 - 11:40 CST0020

11:40 - 12:00 CST0022

Venue

Time Paper ID

10:40 - 11:00 AME0001

11:00 - 11:20 AME0003

11:20 - 11:40 AME0013

11:40 - 12:00 AME0014

Venue

Time Paper ID

10:40 - 11:00 TSF0015

11:00 - 11:20 TSF0017

11:20 - 11:40 TSF0019

11:40 - 12:00 TSF0025

12:00 - 13:00

VenueTime Paper ID

13:00 - 13:20 AMM0021

13:20 - 13:40 AMM0023

13:40 - 14:00 AMM0024

14:00 - 14:20 AMM0025

14:20 - 14:40 AMM0026

14:40 - 15:00

VenueTime Paper ID

13:00 - 13:20 IEI0001

13:20 - 13:40 EDU0002

13:40 - 14:00 EDU0003

14:00 - 14:20 EDU0004

14:20 - 14:40 EDU0001

14:40 - 15:00 EDU0005

VenueTime Paper ID


13:20 - 13:40 CST0023

13:40 - 14:00 CST0026

14:00 - 14:20 CST0019

14:20 - 14:40 CST0024

14:40 - 15:00 CST0025

VenueTime Paper ID

13:00 - 13:20 DRC0004

13:20 - 13:40 DRC0022

13:40 - 14:00 DRC0023

14:00 - 14:20 DRC0025

14:20 - 14:40 DRC0026

14:40 - 15:00 DRC0027

VenueTime Paper ID

13:00 - 13:20 ETM0007

13:20 - 13:40 ETM0008

13:40 - 14:00 ETM0009

14:00 - 14:20 ETM0010

14:20 - 14:40 ETM0012

14:40 - 15:00 ETM0005

VenueTime Paper ID

13:00 - 13:20 TSF0022

13:20 - 13:40 TSF0020

13:40 - 14:00 TSF0023

14:00 - 14:20 TSF0024

14:20 - 14:40

14:40 - 15:00

Paper ID

DRC0014

ASEAN01

ASEAN02

ASEAN03

ASEAN04

ASEAN05

ASEAN06

ASEAN07

ASEAN08

ASEAN09

ASEAN10

16:30 - 18:00

18:00 - 21:00

Performance characteristic of hybrid cooling system based on cooling pad and evaporator

J I Yoon, C H Son1, K H Choi, Y.B. Kim,Y H Sung, S J Roh, Y M Kim, S H Seol

Calcium granules drying using air flow through technicG. Prayutta, W. Kaensup, and A. Boonyaprapasorn

Study on a Stirling cycle machine as a household refrigerator - the technical points and prospects for practical use

Toshio Otaka

Numerical analysis of rectangular two phase natural circulation loop

S. Venkata Sai Sudheer, K. Kiran Kumar, and Karthik Balasubramanian

Gesture based interface of robot arm “Udero” for upper limb dysfunction

Tomoya Ichikawa, Ken’ichi Yano, Ryota Sakamoto, Shintaro Shimada, Tsutomu Shimada, and Panya Minyong

Parametric system identification of catamaran for improving controller design

Surasak Timpitak, Pradya Prempraneerach, and Eakkachai Pengwang

Multi-body dynamics simulation of tension on chain link plate under basic conveyor chain system for rubber gloves industry

Chaiyapont Techapatrak, Chainarong Srikunwong

Authors


Experimental investigation of solid rocket motors for small sounding rockets

Thada Suksila

Development of a hardware-in-loop attitude control simulator for a CubeSat satellite

Wittawat Tapsawat, Teerawat Sangpet and Suwat Kuntanapreeda

An investigation on the spray characteristics of an 800kPa CNG injector

Sakda Thongchai and Ocktaeck Lim

Development of forward collision warning system using laser scanner with camera to detect and estimate object headway distance

Kanin Kiataramgul, and Nuksit Noomwongs

SarochaTitle

Authors

System identification using Nuclear Norm & Tabu Search optimization

Asif A. Ahmed, Marco P. Schoen, and Ken W. Bosworth

Title Authors

Numerical simulation of the hair formation –modeling of hair cycle

Narumichi Kajihara and Katsuya Nagayama

Performance study of knee supports by electromyography (EMG) testing

Kidsadawut Noochoochad, Nattha Jindapetch, Satta Srewaradachpisal, Suppanut Bunjongturakarn, Wiriya Thongruang,

Kinematic analysis and trajectory of a dog-like robot

Thip-ubolTitle

Arnoma III


Fuel Upgrading to Cleaner and High Value Fuels Prof. Dr. Ashwani K. Gupta

Hydrothermal carbonization of rice husk for fuel upgrading

Amornphun Phunopas, and Narisara Suwichien

A potential approach for custom-made ocular prosthesis using UV-printer

Amakorn Poommoon, Bunyong Rungroungdouyboon, Sakchai Vongkittirux

Bio-diesel fuel (BDF) synthesis by using solid catalyst based on ultrasonic irradiation

Ning Zhu, Mingchi Kuo and Tiancheng Zhang

Effects of seawater flow rate and evaporation temperature on performance of Sherbet type ice making machine

C H Son, J I Yoon, K H Choi, H K Lee, K S Lee, C G Moon and S H Seol

Coffee BreakSession 4

Arnoma ITitle Authors

N. Suteerawattananonda, N. Kongkaew, and S. Patumsawad

Study on tool wear characteristic of precision cutting in the ductile iron FCD600

Yaning Zou, Yukio Maeda, Kazuya Kato, Hideki Tanaka, Takanori Yazawa, and Tatsuki Otsubo

Examination of drilling for small-diameter holes in aluminum alloys

Shin Nakai, Yukio Maeda1, Kazuya Kato, Hideaki Tanaka, Takanori Yazawa, and Tatsuki Otsubo

Examination of cutting edge shape on multi-facet tool in ultra-precision cutting

Keisuke Amaki, Yukio Maeda, Kazuya Kato, Hideki Tanaka, Takanori Yazawa, and Tatsuki Otsubo

Characterization of hemp yarn with alkaline surface treatment for polymer matrix composite applications

A. Kittilaksanon, K. Rungjirakit1, and S. Aimmanee

Fundamental Study on Flow-Deflector Performance for Diffuser

T. Ozaki, T. Inoue and K. Hirata

Biomass Gasification Research for Thai Ceramic Industry Prof. Dr. Nakorn Tippayawong

A parametric simulation of solar chimney power plantLim Beng Hooi, and Saravana Kannan Thangavelu

Energy consumption analysis for electric campus tram design based on real university driving cycle pattern in Thailand

Duangsrikaew B., Mongkoltanatas J., Karin P., Hanamura K. and Benyajati C.

Performance characteristics of the Savonius turbine Supakit Worasinchai1, Kiatkong Suwannakij


Gas-Liquid Two-Phase Flows in Micro and Mini Channels

Prof. Dr. Somchai Wongwises


M. Kotani and H. Saitoh

Authors


Development master arm of 2-DOF planar parallel manipulator for In-Vitro Fertilization

Kitti Thamrongaphichartkul1, Supachai Vongbunyong, and Lalana Nuntakarn

Lane detection using Randomized Hough TransformPeerawat Mongkonyong, Chaiwat Nuthong, Supakorn Siddhichai and Masaki Yamakita

External force/velocity control for an autonomous rehabilitation robot

Peerayuth Saekow, Paramin Neranon and Pruittikorn Smithmaitrie

PID control for one dimensional magnetic levitationSarayut Laphaout, Patcharapol Pholin, Wattanasit Seesaentor and Sinchai Chinvorarat

PathummasTitle

Session 3Arnoma I

Title Authors

The evaluation of labral repair affect hip joint by finite element analysis

Chanatkarn Angsutanasombat, Nadhaporn Saengpetch, Kitti Aroonjarattham, Chompunut Somtua and Panya Aroonjarattham

Numerical modelling of the influence of stromal cells on tumor growth and angiogenesis

Nobuyuki Sakiyama and Katsuya Nagayama

Arnoma III

Improved design of a cone-shaped rotating disk for shear force loading in a cell culture plate

Boonrit Keawprachum, Nuttapol Limjeerajarus, Chalida Nakalekha, and Pornsak Srisungsitthisunti


Investigation of methane combustion flames diluted by carbon dioxide on non-premixed burner

M. Angsuchoti, A. Kaewpradap and S. Jugjai

A study on comparison of flame speed in combustion the biomass fuels in a fixed-bed

S. Laaongnaun, N. Kongkaew and S. Patumsawad

Microwave pre-eating of Asphalt recycling procesRatthasak Prommas, Thaweesak Rungsakthaweekul, and Piyapong Kesawadkorn

Changes in the hardness and microstructures of severely deformed β-titanium alloys

Ayao Ishikawa, Isao Kuboki, and Tetsuro Yanaseko

Experimental investigations of density-induced segregation in binary granular mixtures under vertical vibrations

Tanapon Yachai, Itthichai Preechawuttipong, and Pawarut Jongchansitto

A comparison of mechanical properties between plasma arc welding (PAW) and three popular type of welding process (SMAW GMAW GTAW) on dissimilar materials

Sumeth Nuchim, Ganwarich Pluphrach, and Prayoon Surin

The strain distribution on varus knee corrected by closing-wedge High Tibial Osteotomy (HTO) and supplemented by closing-wedge Distal Femoral Osteotomy (DFO)

Peeranat Kijthaworn, Kitti Aroonjarattham, Panya Aroonjarattham, Chompunut Somtua and Chanatkarn Angsutanasombat

Session 5Arnoma I

Title Authors

Waste to Fuel : The use of diesel from municipal waste plastic in BMTA buses

Assoc. Prof. Dr. Kanit Wattanavichien

The wavelet-based artificial neural network for state of charge estimation in lithium ion battery

W. Phusakulkajorn, C. Benyajati, T. Phraewphiphat, and J. Mongkoltanatas

Prediction and validation of underwater shock wave pressure generated by explosion and electrical discharge method

Paramet Suttiprapa, Wirapan Seehanam, and Kulachate Pianthong

Title Authors

Optimum Allocation of Heating Surfaces in Sugar Juice Evaporation System

Prof. Dr. Somchart Chantasiriwan

The evolution of homogeneous isotropic turbulence in background rotation

Jiratrakul Tunkeaw and Watchapon Rojanaratanangkule

Improvement for enhancing effectiveness of universal power system (UPS) continuous testing process

Lerdlekha Sriratana

Project collaboration between art and science students as a venue for engineering design education

Akito Sekiguchi and Daigo Misaki

Transferring experience labs for production engineering students to universities in newly industrialized countries

A. Leiden, G. Posselt, V. Bhakar, R. Singh, K. S. Sangwan and C. Herrmann

Surface roughness determination and comparison of parts printed using different additive manufacturing techniques

Wahid Z., Mohd M. K. A. A, Baharudin B.T.H.T , Mustapha F. and Ismail M.I.S

Compressive deformation behavior of meso pillar fabricated from magnesium alloy AZ 80

T. Nakamura, T. Kakiuchi, Y. Yogo, T. Suzuki, M. Wakasugi, Y. Uematsu


Numerical Heat Transfer Analysis in Heat Exchangers with Vortex Generators

Assoc. Prof. Dr. Pongjet Promvonge

Experimental and numerical investigations of heat transfer and thermal efficiency of an infrared gas stove

A. Charoenlerdchanya, P. Rattanadecho, and P. Keangin

Analysis of temperature profile and electric field in natural rubber glove due to microwave heating: effects of waveguide position

P. Keangin, U. Narumitbowonkul and P. Rattanadecho

Mind map learning for advanced engineering study: case study in system dynamics

Denchai Woradechjumroen

Multicultural design educationFrancis E.H Tay, W.F Lu and Stanley C.H Thian


Comparing the engineering program feeders from SiF and convention models

Warawaran Roongruangsri, Niwat Moonpa, Janyawat Vuthijumnonk and Kampanart Sangsuwan

Two models for identification and predicting behaviour of an induction motor system

Chien-Hsun Kuo

Multiple products management system with sensors array in automated storage and retrieval systems

Supachai Vongbunyong, Perawat Roengritronnachai, Savanut Kongsanit, Chawisa Chanok-owat, Pongsakorn Polchankajorn

Guidance system for mobile robots Masashi Yokota, Tadashi Masuda, and Takashi Nozaki

Investigation on performance of two-stage ejector in the steam ejector refrigeration by CFD simulation

N. Suvarnakuta, K. Pianthong, T. Sriveerakul, and W. Seehanam

Hot air impingement on a flat plate using Large Eddy Simulation (LES) technique

Plengsa-ard C. and Kaewbumrung M.


CFD modelling wall heat transfer inside a combustion chamber using ANSYS forte


Optimal trajectory design for robotic arm Mohamad Khairi Ishak, Muhammad Izzat Roslan and Elmi Abu Bakar

A study on parameter optimization for passive vibration damping system by giant magnetostrictive material

Yuichiro Watanabe, Yoshiki Sugawara


Study on controller design of a flexible link manipulator using wave based control method

Ikki Ando, Yoshiki Sugawara, and Sayako Sakama

A. Yoshida, K. Moriuchi, Y. Ueda and S. Kinoshita


Efficiency improvement of a concentrated solar receiver for water heating system using porous medium

Boonrit Prasartkaew

Electric motorcycle charging station powered by solar energy

Akarawat Siriwattanapong, Chawin Chantharasenawong

Controlling of aggregate split-type air-conditioners under the thermal comfort conditions for energy management

Surasit Thiangchanta, and Chatchawan Chaichana


Mano Chankrachang, Pisit Yongyingsakthavorn, Atitaya Tohsan, and Udomkiat Nontakaew

Xu Chen, Liang Jun, Chen Long and Zhu Ning

Lunch

Heat transfer enhancement of flow insulator by combined stainless steel fibrous and wire net porous materials

Khantikomol P., Polsongkram M., Apisitpinyo W. and Poowadin T.

Move to Pier: Buses leave from the hotel parking lotTSME Annual General Meeting & Banquet Dinner on a Cruise

A study on catalytic converter for emission reduction of motorcycle engine

Huynh Thanh Cong, Le Phuc Nguyen and Nguyen Ho Xuan Duy

Optical diagnostics for fluid mechanics research from planar (2D3C PIV) to volumetric (Tomo-PIV) measurements

Carsten Meier, Arun Raj Ethi Raj

Heat transfer characteristics of a cooling jacket with double spiral paths for ball screws


Dynamic behavior of vortices rolled up from a heaving elastic airfoil by a FSI simulation

Masaki Fuchiwaki, and Aphaiwong Junchangpood

Investigations of faulty interaction effect to refrigeration system operations


Study on light and thermal energy of illumination device for plant factory design

14 December 2017

15:00 - 16:00

Poster Session @ 3rd Floor Foyer/Coffee Break

Title Authors

Study on design of light-weight super-abrasive wheel K. Nohara, K. Yanagihara and M. Ogawa




Optimization of biodiesel production from mixed waste cooking oil with Calophyllum inophyllum

Jassinnee Milano, Hwai Chyuan Ong, H.H. Masjuki and A.S. Silitonga

Evaluation of the periodicity of inaccessible rough surfaces by ultrasonic backscatter

Chanh Nghia Nguyen, Yu Kurokawa and Hirotsugu Inoue

Spark ignition timing controller to actuate artificial misfire condition

Ajmir Mohd Saill, Elmi Abu Bakar and Mohammad Nazir Abdullah

New urban bus transport in Yangon, Myanmar Phyo Zin Ko Ko

The elder alarm product for better communication Tial Cuai Man

Vehicle acceleration controller design based on parallel neural network PID

Wang Wensa, Cong Sensen, Wang Jun, Xu Peng, Yu Yang, Liang Jun, Chen Long and Zhu Ning

Car detection and classification using cascaded method

216

Venue

Time Paper ID

09:00 - 09:20 BME0001

09:20 - 09:40 BME0002

09:40 - 10:00 BME0009

10:00 - 10:20 BME0010

Venue

Time Paper ID


09:20 - 09:40 AEC0013

09:40 - 10:00 AEC0014

10:00 - 10:20 AEC0012

Venue

Time Paper ID


09:20 - 09:40 CST0016

09:40 - 10:00 CST0017

10:00 - 10:20 CST0018

Venue

Time Paper ID

09:00 - 09:20 DRC0017

09:20 - 09:40 DRC0019

09:40 - 10:00 DRC0020

10:00 - 10:20 DRC0024

Venue

Time Paper ID


09:20 - 09:40 ETM0002

09:40 - 10:00 ETM0003

10:00 - 10:20 ETM0001

Venue

Time Paper ID


09:20 - 09:40 TSF0012

09:40 - 10:00 TSF0013

10:00 - 10:20 TSF0014

10:20 - 10:40

Venue

Time Paper ID

10:40 - 11:00 AMM0017

11:00 - 11:20 AMM0018

11:20 - 11:40 AMM0019

11:40 - 12:00 AMM0022

Venue

Time Paper ID


11:00 - 11:20 AEC0015

11:20 - 11:40 AEC0017

11:40 - 12:00

Venue

Time Paper ID

10:40 - 11:00 BME0003

11:00 - 11:20 BME0007

11:20 - 11:40 BME0006

11:40 - 12:00 BME0011

Venue

Time Paper ID

10:40 - 11:00 DRC0005

11:00 - 11:20 DRC0021

11:20 - 11:40 CST0020

11:40 - 12:00 CST0022

Venue

Time Paper ID

10:40 - 11:00 AME0001

11:00 - 11:20 AME0003

11:20 - 11:40 AME0013

11:40 - 12:00 AME0014

Venue

Time Paper ID

10:40 - 11:00 TSF0015

11:00 - 11:20 TSF0017

11:20 - 11:40 TSF0019

11:40 - 12:00 TSF0025

12:00 - 13:00

VenueTime Paper ID

13:00 - 13:20 AMM0021

13:20 - 13:40 AMM0023

13:40 - 14:00 AMM0024

14:00 - 14:20 AMM0025

14:20 - 14:40 AMM0026

14:40 - 15:00

VenueTime Paper ID

13:00 - 13:20 IEI0001

13:20 - 13:40 EDU0002

13:40 - 14:00 EDU0003

14:00 - 14:20 EDU0004

14:20 - 14:40 EDU0001

14:40 - 15:00 EDU0005

VenueTime Paper ID


13:20 - 13:40 CST0023

13:40 - 14:00 CST0026

14:00 - 14:20 CST0019

14:20 - 14:40 CST0024

14:40 - 15:00 CST0025

VenueTime Paper ID

13:00 - 13:20 DRC0004

13:20 - 13:40 DRC0022

13:40 - 14:00 DRC0023

14:00 - 14:20 DRC0025

14:20 - 14:40 DRC0026

14:40 - 15:00 DRC0027

VenueTime Paper ID

13:00 - 13:20 ETM0007

13:20 - 13:40 ETM0008

13:40 - 14:00 ETM0009

14:00 - 14:20 ETM0010

14:20 - 14:40 ETM0012

14:40 - 15:00 ETM0005

VenueTime Paper ID

13:00 - 13:20 TSF0022

13:20 - 13:40 TSF0020

13:40 - 14:00 TSF0023

14:00 - 14:20 TSF0024

14:20 - 14:40

14:40 - 15:00

Paper ID

DRC0014

ASEAN01

ASEAN02

ASEAN03

ASEAN04

ASEAN05

ASEAN06

ASEAN07

ASEAN08

ASEAN09

ASEAN10

16:30 - 18:00

18:00 - 21:00





Toshio Otaka









Authors



Thada Suksila







SarochaTitle

Authors



Title Authors






Thip-ubolTitle

Arnoma III


































Authors








PathummasTitle

Session 3Arnoma I

Title Authors





Arnoma III

















Session 5Arnoma I

Title Authors







Title Authors






Lerdlekha Sriratana























Chien-Hsun Kuo




















Boonrit Prasartkaew








Lunch















14 December 2017

15:00 - 16:00


Title Authors
















217

Venue

Time Paper ID

09:00 - 09:20 BME0001

09:20 - 09:40 BME0002

09:40 - 10:00 BME0009

10:00 - 10:20 BME0010

Venue

Time Paper ID


09:20 - 09:40 AEC0013

09:40 - 10:00 AEC0014

10:00 - 10:20 AEC0012

Venue

Time Paper ID


09:20 - 09:40 CST0016

09:40 - 10:00 CST0017

10:00 - 10:20 CST0018

Venue

Time Paper ID

09:00 - 09:20 DRC0017

09:20 - 09:40 DRC0019

09:40 - 10:00 DRC0020

10:00 - 10:20 DRC0024

Venue

Time Paper ID


09:20 - 09:40 ETM0002

09:40 - 10:00 ETM0003

10:00 - 10:20 ETM0001

Venue

Time Paper ID


09:20 - 09:40 TSF0012

09:40 - 10:00 TSF0013

10:00 - 10:20 TSF0014

10:20 - 10:40

Venue

Time Paper ID

10:40 - 11:00 AMM0017

11:00 - 11:20 AMM0018

11:20 - 11:40 AMM0019

11:40 - 12:00 AMM0022

Venue

Time Paper ID


11:00 - 11:20 AEC0015

11:20 - 11:40 AEC0017

11:40 - 12:00

Venue

Time Paper ID

10:40 - 11:00 BME0003

11:00 - 11:20 BME0007

11:20 - 11:40 BME0006

11:40 - 12:00 BME0011

Venue

Time Paper ID

10:40 - 11:00 DRC0005

11:00 - 11:20 DRC0021

11:20 - 11:40 CST0020

11:40 - 12:00 CST0022

Venue

Time Paper ID

10:40 - 11:00 AME0001

11:00 - 11:20 AME0003

11:20 - 11:40 AME0013

11:40 - 12:00 AME0014

Venue

Time Paper ID

10:40 - 11:00 TSF0015

11:00 - 11:20 TSF0017

11:20 - 11:40 TSF0019

11:40 - 12:00 TSF0025

12:00 - 13:00

VenueTime Paper ID

13:00 - 13:20 AMM0021

13:20 - 13:40 AMM0023

13:40 - 14:00 AMM0024

14:00 - 14:20 AMM0025

14:20 - 14:40 AMM0026

14:40 - 15:00

VenueTime Paper ID

13:00 - 13:20 IEI0001

13:20 - 13:40 EDU0002

13:40 - 14:00 EDU0003

14:00 - 14:20 EDU0004

14:20 - 14:40 EDU0001

14:40 - 15:00 EDU0005

VenueTime Paper ID


13:20 - 13:40 CST0023

13:40 - 14:00 CST0026

14:00 - 14:20 CST0019

14:20 - 14:40 CST0024

14:40 - 15:00 CST0025

VenueTime Paper ID

13:00 - 13:20 DRC0004

13:20 - 13:40 DRC0022

13:40 - 14:00 DRC0023

14:00 - 14:20 DRC0025

14:20 - 14:40 DRC0026

14:40 - 15:00 DRC0027

VenueTime Paper ID

13:00 - 13:20 ETM0007

13:20 - 13:40 ETM0008

13:40 - 14:00 ETM0009

14:00 - 14:20 ETM0010

14:20 - 14:40 ETM0012

14:40 - 15:00 ETM0005

VenueTime Paper ID

13:00 - 13:20 TSF0022

13:20 - 13:40 TSF0020

13:40 - 14:00 TSF0023

14:00 - 14:20 TSF0024

14:20 - 14:40

14:40 - 15:00

Paper ID

DRC0014

ASEAN01

ASEAN02

ASEAN03

ASEAN04

ASEAN05

ASEAN06

ASEAN07

ASEAN08

ASEAN09

ASEAN10

16:30 - 18:00

18:00 - 21:00





Toshio Otaka









Authors



Thada Suksila







SarochaTitle

Authors



Title Authors






Thip-ubolTitle

Arnoma III


































Authors








PathummasTitle

Session 3Arnoma I

Title Authors





Arnoma III

















Session 5Arnoma I

Title Authors







Title Authors






Lerdlekha Sriratana























Chien-Hsun Kuo




















Boonrit Prasartkaew








Lunch















14 December 2017

15:00 - 16:00


Title Authors
















218

Venue

Time Paper ID

09:00 - 09:20 BME0001

09:20 - 09:40 BME0002

09:40 - 10:00 BME0009

10:00 - 10:20 BME0010

Venue

Time Paper ID


09:20 - 09:40 AEC0013

09:40 - 10:00 AEC0014

10:00 - 10:20 AEC0012

Venue

Time Paper ID


09:20 - 09:40 CST0016

09:40 - 10:00 CST0017

10:00 - 10:20 CST0018

Venue

Time Paper ID

09:00 - 09:20 DRC0017

09:20 - 09:40 DRC0019

09:40 - 10:00 DRC0020

10:00 - 10:20 DRC0024

Venue

Time Paper ID


09:20 - 09:40 ETM0002

09:40 - 10:00 ETM0003

10:00 - 10:20 ETM0001

Venue

Time Paper ID


09:20 - 09:40 TSF0012

09:40 - 10:00 TSF0013

10:00 - 10:20 TSF0014

10:20 - 10:40

Venue

Time Paper ID

10:40 - 11:00 AMM0017

11:00 - 11:20 AMM0018

11:20 - 11:40 AMM0019

11:40 - 12:00 AMM0022

Venue

Time Paper ID


11:00 - 11:20 AEC0015

11:20 - 11:40 AEC0017

11:40 - 12:00

Venue

Time Paper ID

10:40 - 11:00 BME0003

11:00 - 11:20 BME0007

11:20 - 11:40 BME0006

11:40 - 12:00 BME0011

Venue

Time Paper ID

10:40 - 11:00 DRC0005

11:00 - 11:20 DRC0021

11:20 - 11:40 CST0020

11:40 - 12:00 CST0022

Venue

Time Paper ID

10:40 - 11:00 AME0001

11:00 - 11:20 AME0003

11:20 - 11:40 AME0013

11:40 - 12:00 AME0014

Venue

Time Paper ID

10:40 - 11:00 TSF0015

11:00 - 11:20 TSF0017

11:20 - 11:40 TSF0019

11:40 - 12:00 TSF0025

12:00 - 13:00

VenueTime Paper ID

13:00 - 13:20 AMM0021

13:20 - 13:40 AMM0023

13:40 - 14:00 AMM0024

14:00 - 14:20 AMM0025

14:20 - 14:40 AMM0026

14:40 - 15:00

VenueTime Paper ID

13:00 - 13:20 IEI0001

13:20 - 13:40 EDU0002

13:40 - 14:00 EDU0003

14:00 - 14:20 EDU0004

14:20 - 14:40 EDU0001

14:40 - 15:00 EDU0005

VenueTime Paper ID


13:20 - 13:40 CST0023

13:40 - 14:00 CST0026

14:00 - 14:20 CST0019

14:20 - 14:40 CST0024

14:40 - 15:00 CST0025

VenueTime Paper ID

13:00 - 13:20 DRC0004

13:20 - 13:40 DRC0022

13:40 - 14:00 DRC0023

14:00 - 14:20 DRC0025

14:20 - 14:40 DRC0026

14:40 - 15:00 DRC0027

VenueTime Paper ID

13:00 - 13:20 ETM0007

13:20 - 13:40 ETM0008

13:40 - 14:00 ETM0009

14:00 - 14:20 ETM0010

14:20 - 14:40 ETM0012

14:40 - 15:00 ETM0005

VenueTime Paper ID

13:00 - 13:20 TSF0022

13:20 - 13:40 TSF0020

13:40 - 14:00 TSF0023

14:00 - 14:20 TSF0024

14:20 - 14:40

14:40 - 15:00

Paper ID

DRC0014

ASEAN01

ASEAN02

ASEAN03

ASEAN04

ASEAN05

ASEAN06

ASEAN07

ASEAN08

ASEAN09

ASEAN10

16:30 - 18:00

18:00 - 21:00





Toshio Otaka









Authors



Thada Suksila







SarochaTitle

Authors



Title Authors






Thip-ubolTitle

Arnoma III


































Authors








PathummasTitle

Session 3Arnoma I

Title Authors





Arnoma III

















Session 5Arnoma I

Title Authors







Title Authors






Lerdlekha Sriratana























Chien-Hsun Kuo




















Boonrit Prasartkaew








Lunch















14 December 2017

15:00 - 16:00


Title Authors
















219

Venue

Time Paper ID

09:00 - 09:20 BME0001

09:20 - 09:40 BME0002

09:40 - 10:00 BME0009

10:00 - 10:20 BME0010

Venue

Time Paper ID


09:20 - 09:40 AEC0013

09:40 - 10:00 AEC0014

10:00 - 10:20 AEC0012

Venue

Time Paper ID


09:20 - 09:40 CST0016

09:40 - 10:00 CST0017

10:00 - 10:20 CST0018

Venue

Time Paper ID

09:00 - 09:20 DRC0017

09:20 - 09:40 DRC0019

09:40 - 10:00 DRC0020

10:00 - 10:20 DRC0024

Venue

Time Paper ID


09:20 - 09:40 ETM0002

09:40 - 10:00 ETM0003

10:00 - 10:20 ETM0001

Venue

Time Paper ID


09:20 - 09:40 TSF0012

09:40 - 10:00 TSF0013

10:00 - 10:20 TSF0014

10:20 - 10:40

Venue

Time Paper ID

10:40 - 11:00 AMM0017

11:00 - 11:20 AMM0018

11:20 - 11:40 AMM0019

11:40 - 12:00 AMM0022

Venue

Time Paper ID


11:00 - 11:20 AEC0015

11:20 - 11:40 AEC0017

11:40 - 12:00

Venue

Time Paper ID

10:40 - 11:00 BME0003

11:00 - 11:20 BME0007

11:20 - 11:40 BME0006

11:40 - 12:00 BME0011

Venue

Time Paper ID

10:40 - 11:00 DRC0005

11:00 - 11:20 DRC0021

11:20 - 11:40 CST0020

11:40 - 12:00 CST0022

Venue

Time Paper ID

10:40 - 11:00 AME0001

11:00 - 11:20 AME0003

11:20 - 11:40 AME0013

11:40 - 12:00 AME0014

Venue

Time Paper ID

10:40 - 11:00 TSF0015

11:00 - 11:20 TSF0017

11:20 - 11:40 TSF0019

11:40 - 12:00 TSF0025

12:00 - 13:00

VenueTime Paper ID

13:00 - 13:20 AMM0021

13:20 - 13:40 AMM0023

13:40 - 14:00 AMM0024

14:00 - 14:20 AMM0025

14:20 - 14:40 AMM0026

14:40 - 15:00

VenueTime Paper ID

13:00 - 13:20 IEI0001

13:20 - 13:40 EDU0002

13:40 - 14:00 EDU0003

14:00 - 14:20 EDU0004

14:20 - 14:40 EDU0001

14:40 - 15:00 EDU0005

VenueTime Paper ID


13:20 - 13:40 CST0023

13:40 - 14:00 CST0026

14:00 - 14:20 CST0019

14:20 - 14:40 CST0024

14:40 - 15:00 CST0025

VenueTime Paper ID

13:00 - 13:20 DRC0004

13:20 - 13:40 DRC0022

13:40 - 14:00 DRC0023

14:00 - 14:20 DRC0025

14:20 - 14:40 DRC0026

14:40 - 15:00 DRC0027

VenueTime Paper ID

13:00 - 13:20 ETM0007

13:20 - 13:40 ETM0008

13:40 - 14:00 ETM0009

14:00 - 14:20 ETM0010

14:20 - 14:40 ETM0012

14:40 - 15:00 ETM0005

VenueTime Paper ID

13:00 - 13:20 TSF0022

13:20 - 13:40 TSF0020

13:40 - 14:00 TSF0023

14:00 - 14:20 TSF0024

14:20 - 14:40

14:40 - 15:00

Paper ID

DRC0014

ASEAN01

ASEAN02

ASEAN03

ASEAN04

ASEAN05

ASEAN06

ASEAN07

ASEAN08

ASEAN09

ASEAN10

16:30 - 18:00

18:00 - 21:00





Toshio Otaka









Authors



Thada Suksila







SarochaTitle

Authors



Title Authors






Thip-ubolTitle

Arnoma III


































Authors








PathummasTitle

Session 3Arnoma I

Title Authors





Arnoma III

















Session 5Arnoma I

Title Authors







Title Authors






Lerdlekha Sriratana























Chien-Hsun Kuo




















Boonrit Prasartkaew








Lunch















14 December 2017

15:00 - 16:00


Title Authors
















220

Venue

Time Paper ID

09:00 - 09:20 BME0001

09:20 - 09:40 BME0002

09:40 - 10:00 BME0009

10:00 - 10:20 BME0010

Venue

Time Paper ID


09:20 - 09:40 AEC0013

09:40 - 10:00 AEC0014

10:00 - 10:20 AEC0012

Venue

Time Paper ID


09:20 - 09:40 CST0016

09:40 - 10:00 CST0017

10:00 - 10:20 CST0018

Venue

Time Paper ID

09:00 - 09:20 DRC0017

09:20 - 09:40 DRC0019

09:40 - 10:00 DRC0020

10:00 - 10:20 DRC0024

Venue

Time Paper ID


09:20 - 09:40 ETM0002

09:40 - 10:00 ETM0003

10:00 - 10:20 ETM0001

Venue

Time Paper ID


09:20 - 09:40 TSF0012

09:40 - 10:00 TSF0013

10:00 - 10:20 TSF0014

10:20 - 10:40

Venue

Time Paper ID

10:40 - 11:00 AMM0017

11:00 - 11:20 AMM0018

11:20 - 11:40 AMM0019

11:40 - 12:00 AMM0022

Venue

Time Paper ID


11:00 - 11:20 AEC0015

11:20 - 11:40 AEC0017

11:40 - 12:00

Venue

Time Paper ID

10:40 - 11:00 BME0003

11:00 - 11:20 BME0007

11:20 - 11:40 BME0006

11:40 - 12:00 BME0011

Venue

Time Paper ID

10:40 - 11:00 DRC0005

11:00 - 11:20 DRC0021

11:20 - 11:40 CST0020

11:40 - 12:00 CST0022

Venue

Time Paper ID

10:40 - 11:00 AME0001

11:00 - 11:20 AME0003

11:20 - 11:40 AME0013

11:40 - 12:00 AME0014

Venue

Time Paper ID

10:40 - 11:00 TSF0015

11:00 - 11:20 TSF0017

11:20 - 11:40 TSF0019

11:40 - 12:00 TSF0025

12:00 - 13:00

VenueTime Paper ID

13:00 - 13:20 AMM0021

13:20 - 13:40 AMM0023

13:40 - 14:00 AMM0024

14:00 - 14:20 AMM0025

14:20 - 14:40 AMM0026

14:40 - 15:00

VenueTime Paper ID

13:00 - 13:20 IEI0001

13:20 - 13:40 EDU0002

13:40 - 14:00 EDU0003

14:00 - 14:20 EDU0004

14:20 - 14:40 EDU0001

14:40 - 15:00 EDU0005

VenueTime Paper ID


13:20 - 13:40 CST0023

13:40 - 14:00 CST0026

14:00 - 14:20 CST0019

14:20 - 14:40 CST0024

14:40 - 15:00 CST0025

VenueTime Paper ID

13:00 - 13:20 DRC0004

13:20 - 13:40 DRC0022

13:40 - 14:00 DRC0023

14:00 - 14:20 DRC0025

14:20 - 14:40 DRC0026

14:40 - 15:00 DRC0027

VenueTime Paper ID

13:00 - 13:20 ETM0007

13:20 - 13:40 ETM0008

13:40 - 14:00 ETM0009

14:00 - 14:20 ETM0010

14:20 - 14:40 ETM0012

14:40 - 15:00 ETM0005

VenueTime Paper ID

13:00 - 13:20 TSF0022

13:20 - 13:40 TSF0020

13:40 - 14:00 TSF0023

14:00 - 14:20 TSF0024

14:20 - 14:40

14:40 - 15:00

Paper ID

DRC0014

ASEAN01

ASEAN02

ASEAN03

ASEAN04

ASEAN05

ASEAN06

ASEAN07

ASEAN08

ASEAN09

ASEAN10

16:30 - 18:00

18:00 - 21:00





Toshio Otaka









Authors



Thada Suksila







SarochaTitle

Authors



Title Authors






Thip-ubolTitle

Arnoma III


































Authors








PathummasTitle

Session 3Arnoma I

Title Authors





Arnoma III

















Session 5Arnoma I

Title Authors







Title Authors






Lerdlekha Sriratana























Chien-Hsun Kuo




















Boonrit Prasartkaew








Lunch















14 December 2017

15:00 - 16:00


Title Authors
















221

Venue

Time Paper ID

09:00 - 09:20 BME0001

09:20 - 09:40 BME0002

09:40 - 10:00 BME0009

10:00 - 10:20 BME0010

Venue

Time Paper ID


09:20 - 09:40 AEC0013

09:40 - 10:00 AEC0014

10:00 - 10:20 AEC0012

Venue

Time Paper ID


09:20 - 09:40 CST0016

09:40 - 10:00 CST0017

10:00 - 10:20 CST0018

Venue

Time Paper ID

09:00 - 09:20 DRC0017

09:20 - 09:40 DRC0019

09:40 - 10:00 DRC0020

10:00 - 10:20 DRC0024

Venue

Time Paper ID


09:20 - 09:40 ETM0002

09:40 - 10:00 ETM0003

10:00 - 10:20 ETM0001

Venue

Time Paper ID


09:20 - 09:40 TSF0012

09:40 - 10:00 TSF0013

10:00 - 10:20 TSF0014

10:20 - 10:40

Venue

Time Paper ID

10:40 - 11:00 AMM0017

11:00 - 11:20 AMM0018

11:20 - 11:40 AMM0019

11:40 - 12:00 AMM0022

Venue

Time Paper ID


11:00 - 11:20 AEC0015

11:20 - 11:40 AEC0017

11:40 - 12:00

Venue

Time Paper ID

10:40 - 11:00 BME0003

11:00 - 11:20 BME0007

11:20 - 11:40 BME0006

11:40 - 12:00 BME0011

Venue

Time Paper ID

10:40 - 11:00 DRC0005

11:00 - 11:20 DRC0021

11:20 - 11:40 CST0020

11:40 - 12:00 CST0022

Venue

Time Paper ID

10:40 - 11:00 AME0001

11:00 - 11:20 AME0003

11:20 - 11:40 AME0013

11:40 - 12:00 AME0014

Venue

Time Paper ID

10:40 - 11:00 TSF0015

11:00 - 11:20 TSF0017

11:20 - 11:40 TSF0019

11:40 - 12:00 TSF0025

12:00 - 13:00

VenueTime Paper ID

13:00 - 13:20 AMM0021

13:20 - 13:40 AMM0023

13:40 - 14:00 AMM0024

14:00 - 14:20 AMM0025

14:20 - 14:40 AMM0026

14:40 - 15:00

VenueTime Paper ID

13:00 - 13:20 IEI0001

13:20 - 13:40 EDU0002

13:40 - 14:00 EDU0003

14:00 - 14:20 EDU0004

14:20 - 14:40 EDU0001

14:40 - 15:00 EDU0005

VenueTime Paper ID


13:20 - 13:40 CST0023

13:40 - 14:00 CST0026

14:00 - 14:20 CST0019

14:20 - 14:40 CST0024

14:40 - 15:00 CST0025

VenueTime Paper ID

13:00 - 13:20 DRC0004

13:20 - 13:40 DRC0022

13:40 - 14:00 DRC0023

14:00 - 14:20 DRC0025

14:20 - 14:40 DRC0026

14:40 - 15:00 DRC0027

VenueTime Paper ID

13:00 - 13:20 ETM0007

13:20 - 13:40 ETM0008

13:40 - 14:00 ETM0009

14:00 - 14:20 ETM0010

14:20 - 14:40 ETM0012

14:40 - 15:00 ETM0005

VenueTime Paper ID

13:00 - 13:20 TSF0022

13:20 - 13:40 TSF0020

13:40 - 14:00 TSF0023

14:00 - 14:20 TSF0024

14:20 - 14:40

14:40 - 15:00

Paper ID

DRC0014

ASEAN01

ASEAN02

ASEAN03

ASEAN04

ASEAN05

ASEAN06

ASEAN07

ASEAN08

ASEAN09

ASEAN10

16:30 - 18:00

18:00 - 21:00





Toshio Otaka









Authors



Thada Suksila







SarochaTitle

Authors



Title Authors






Thip-ubolTitle

Arnoma III


































Authors








PathummasTitle

Session 3Arnoma I

Title Authors





Arnoma III

















Session 5Arnoma I

Title Authors







Title Authors






Lerdlekha Sriratana























Chien-Hsun Kuo




















Boonrit Prasartkaew








Lunch















14 December 2017

15:00 - 16:00


Title Authors
















VenueTime Paper ID

09:00 - 09:20 AMM0003

09:20 - 09:40 AMM0006

09:40 - 10:00 AMM0007

10:00 - 10:20 AMM0014

10:20 - 10:40 AME0002

10:40 - 11:00 AME0007

VenueTime Paper ID

09:00 - 09:20 AEC0008

09:20 - 09:40 AEC0011

09:40 - 10:00 AEC0018

10:00 - 10:20 AEC0001

10:20 - 10:40 AEC0016

10:40 - 11:00

VenueTime Paper ID

09:00 - 09:20 CST0003

09:20 - 09:40 CST0008

09:40 - 10:00 CST0010

10:00 - 10:20 CST0021

10:20 - 10:40 CST0004

10:40 - 11:00

VenueTime Paper ID

09:00 - 09:20 DRC0001

09:20 - 09:40 DRC0009

09:40 - 10:00 DRC0010

10:00 - 10:20 DRC0012

10:20 - 10:40 DRC0015

10:40 - 11:00 DRC0018

VenueTime Paper ID

09:00 - 09:20 BME0004

09:20 - 09:40 BME0005

09:40 - 10:00 BME0008

10:00 - 10:20 ETM0006

10:20 - 10:40 ETM0004

10:40 - 11:00 ETM0011

VenueTime Paper ID

09:00 - 09:20 TSF0002

09:20 - 09:40 TSF0016

09:40 - 10:00 TSF0018

10:00 - 10:20 TSF0021

10:20 - 10:40

10:40 - 11:00

11:00 - 11:20

11:20 - 12:00

12:00 - 13:00

13:00 - 16:00

Coffee Break

Flows developing around a finite rotating disk enclosed by a cylindrical casing

Takashi Watanabe and Soma Endo

Influence of superheated steam flow rate on improved degreasing of oily metal waste

Naoki Maruyama, Hiroaki Ito, Sho Okochi and Masafumi Hirota

Effects of mesh type on a non-premixed model in a flameless combustion simulation

Seekharin Komonhirun, Pisit Yongyingsakthavorn, and Udomkiat Nontakeaw

Particle simulation on skin formation: — melanin transportation and formation of freckles

Yuuto Fukuda and Katsuya Nagayama

The study of aerodynamic transition phenomenon of a finite wing at low Reynolds number

Hung-Yen Chou, Yi-Chung Liu, Yi Teng, Yueh-Heng Li, and Fei-Bin Hsiao

Optimum building performance scores when applying different ECM sorting schemes

Thosapon Katejanekarn, Narong Promsorn


Poowadin T., Polsongkram M. and Khantikomol P.

A novel direct-fired porous-medium boiler Boonrit Prasartkaew

Possibility study of gasifier with axial circulating flue gas for reducing Tar

The development of lab-on-a-chip fabricated from two molds

Enhanced control of a flexure-jointed micromanipulation system using a vision-based servoing approach

T Chuthai, M O T Cole, T Wongratanaphisan, and P Puangmali


Finite-time stabilization of chaotic gyros based on a homogeneous supertwisting-like algorithm

Pitcha Khamsuwan, Teerawat Sangpet, Suwat Kuntanapreeda

Railway bogie vibration analysis by mathematical simulation model and a scaled four-wheel railway bogie set

Noppharat Visayataksin, and Manon Sooklamai

Adjustable magnetic force system for climbing robotKaned Thung-od, Arsit Boonyaprapasorn, Thavida Maneewarn, Saravut Lohit and, and Nitirat Siritanon

A. Pramuanjaroenkij, J. Bunta1, J. Thiangpadung, S. Sansaradee, P. Kamsopa, S. Sodsai1, S. Vichainsan, K. Wongpanit, T. Maturos, T. Lomas, A. Tuantranont, B. Cetin, S.

Mass diffusion coefficient measurement for vitreous humor using FEM and MRI

Comparison of thermal degradation area on a small automotive lamp by using ray tracing method and Monte Carlo radiation model

A. Teralapsuwan, J. Soparat, S. Olarnrithinun, and P. Premvaranon

Modification and validation of a rigid hybrid III 50th male dummy model under crash test

Burawich Muangto, Pattaramon Jongpradist

Large Eddy Simulation of turbulence induced secondary flows in stationary and rotating straight square ducts

W. Sudjai, V. Juntasaro, and V. Juttijudata

Innovative engineering systems design using adaptive multi-fidelity concepts

C. Corey Fischer and Ramana V. Grandhi

Thip-ubol

Komsan Rattanakijsuntorn, Anita Penkova, and Satwindar S. Sadhal

Title Authors

Phase behavior and important fuel properties of diesel-palm fatty acid distillate-anhydrous ethanol blends

S. Eiadtrong, T. Leevijit, S. Srewaradachpisal, K. Maliwan, T. Theppaya and G. Prateepchaikul

Catalytic hydrothermal liquefaction of sugar cane leaf in an ethanol-water co-solvent

Thanakrit Nonchana, Kulachate Painthong, and Prachasanti Thaiyasuit

Parametric optimization of application of 2 Ethyl Hexyl-Nitrate on partial substitution of ethanol in diesel for fuel economy and emission control

A. R. Patil1, A. D. Desai


Effect of bluff body and swirl plate on performance of pulverized biomass combustion in a laboratory-scale furnace

Ponepen Laphirattanakul, Pongsanun Kanprom, Sutapat Kwankaomeng and Jarruwat Charoensuk

Session 6Arnoma I

Title Authors

Fatigue behavior of resistance spot welded high strength steel sheets with different nugget sizes

Y. Kato, T. Kakiuchi, Y. Okita, H. Matsuda, R. Ikeda, T. Tagawa, and Y. Uematsu

Compressive behavior of Sulcata Tortoise’s carapace at high rate of deformation

Nadda Jongpairojcosit, Chinnawit Glunrawd, and Petch Jearanaisilawong

Nanoindentation tests of Sulcata Tortoise’s carapaceNadda Jongpairojcosit, Petch Jearanaisilawong

Study of heating and cooling temperature of injection molding to effect on gloss of plastic injection parts

Krit Chasuriyakul1, Wiroj Thasana and Thiradet Khajifa


The TURBO-FUEL-Cell 1.0 – family concept Compact Micro Gas Turbine (MGT) – Solid Oxide Fuel Cell (SOFC) energy converters in the 100-500 kW electrical

H. P. Berg, A. Himmelberg, M. Lehmann, R. Dückershoff, M. Neumann

15 December 2017

Farewell LunchExcursion Trip (Registered Participants)

Design of power system for KNACKSAT satellite Phongsakorn Meemak, Phongsatorn Saisutjarit, and Nisai H. Fuengwarodsakul

Morphology and oxidation kinetics of particulate matters using TGA

Eakkawut Saenkhumvong, Chinda Charoenphonphanich, Preechar Karin

Closing Remarks and Awarding Ceremony @ Arnoma II

Interface for electric wheelchair with tension-athetosis-type cerebral palsy

Motoyu Katsumura1, Ken’ichi Yano, Nakao Tomoyuki, Atsushi Hamada and Katsuhiko Torii

Vibration analysis of baby carriage running on a road having grooves at regular intervals

Chihiro Kamio1, Tatsuhito Aihara

Numerical investigation of saw-toothed and sine-curved trailing edge shape of NACA0012 aerofoil

Pareecha Rattanasiri1, Pakpong Jantapremjit, Alongkod Tipsiri, Tana arkadumnuay, Wannachat Truekhakit and Philip A. Wilson

222

VenueTime Paper ID

09:00 - 09:20 AMM0003

09:20 - 09:40 AMM0006

09:40 - 10:00 AMM0007

10:00 - 10:20 AMM0014

10:20 - 10:40 AME0002

10:40 - 11:00 AME0007

VenueTime Paper ID

09:00 - 09:20 AEC0008

09:20 - 09:40 AEC0011

09:40 - 10:00 AEC0018

10:00 - 10:20 AEC0001

10:20 - 10:40 AEC0016

10:40 - 11:00

VenueTime Paper ID

09:00 - 09:20 CST0003

09:20 - 09:40 CST0008

09:40 - 10:00 CST0010

10:00 - 10:20 CST0021

10:20 - 10:40 CST0004

10:40 - 11:00

VenueTime Paper ID

09:00 - 09:20 DRC0001

09:20 - 09:40 DRC0009

09:40 - 10:00 DRC0010

10:00 - 10:20 DRC0012

10:20 - 10:40 DRC0015

10:40 - 11:00 DRC0018

VenueTime Paper ID

09:00 - 09:20 BME0004

09:20 - 09:40 BME0005

09:40 - 10:00 BME0008

10:00 - 10:20 ETM0006

10:20 - 10:40 ETM0004

10:40 - 11:00 ETM0011

VenueTime Paper ID

09:00 - 09:20 TSF0002

09:20 - 09:40 TSF0016

09:40 - 10:00 TSF0018

10:00 - 10:20 TSF0021

10:20 - 10:40

10:40 - 11:00

11:00 - 11:20

11:20 - 12:00

12:00 - 13:00

13:00 - 16:00

Coffee Break




































Thip-ubol


Title Authors










Session 6Arnoma I

Title Authors











15 December 2017












223

VenueTime Paper ID

09:00 - 09:20 AMM0003

09:20 - 09:40 AMM0006

09:40 - 10:00 AMM0007

10:00 - 10:20 AMM0014

10:20 - 10:40 AME0002

10:40 - 11:00 AME0007

VenueTime Paper ID

09:00 - 09:20 AEC0008

09:20 - 09:40 AEC0011

09:40 - 10:00 AEC0018

10:00 - 10:20 AEC0001

10:20 - 10:40 AEC0016

10:40 - 11:00

VenueTime Paper ID

09:00 - 09:20 CST0003

09:20 - 09:40 CST0008

09:40 - 10:00 CST0010

10:00 - 10:20 CST0021

10:20 - 10:40 CST0004

10:40 - 11:00

VenueTime Paper ID

09:00 - 09:20 DRC0001

09:20 - 09:40 DRC0009

09:40 - 10:00 DRC0010

10:00 - 10:20 DRC0012

10:20 - 10:40 DRC0015

10:40 - 11:00 DRC0018

VenueTime Paper ID

09:00 - 09:20 BME0004

09:20 - 09:40 BME0005

09:40 - 10:00 BME0008

10:00 - 10:20 ETM0006

10:20 - 10:40 ETM0004

10:40 - 11:00 ETM0011

VenueTime Paper ID

09:00 - 09:20 TSF0002

09:20 - 09:40 TSF0016

09:40 - 10:00 TSF0018

10:00 - 10:20 TSF0021

10:20 - 10:40

10:40 - 11:00

11:00 - 11:20

11:20 - 12:00

12:00 - 13:00

13:00 - 16:00

Coffee Break




































Thip-ubol


Title Authors










Session 6Arnoma I

Title Authors











15 December 2017












224

Documents

Open Access proceedings Journal of Physics: Conference series - … · 2017-12-01 · Message from the President of TSME In 2010, TSME started to hold yearly international conferences