OPERATION MANUAL€¦ · SHARP Digital Signage Software Version 4.1 PN-SS01 PN-SS02 PN-SV01 OPERATION MANUAL

SHARP Digital Signage SoftwareVersion 4.1

PN-SS01PN-SS02PN-SV01

OPERATION MANUAL

2

IntroductionPrecautions on use ........................................................................................................................... 5Trademarks ........................................................................................................................................ 6How to read this manual ................................................................................................................... 6

●Icons ............................................................................................................................................................ 6●Notation ....................................................................................................................................................... 6

Definitions .......................................................................................................................................... 7System operation precautions ......................................................................................................... 7Features of SHARP Digital Signage Software............................................................................... 10Program distribution workflow ...................................................................................................... 10

Installing/LaunchingRequired operating environment ................................................................................................... 12Installing SHARP Digital Signage Software .................................................................................. 13

●Installing SHARP Digital Signage Software ........................................................................................... 13●Setting the environment of the viewer PC ............................................................................................ 16●Uninstalling SHARP Digital Signage Software ...................................................................................... 25

Launching and closing the Launcher window .............................................................................. 27●Launching the Launcher window ............................................................................................................ 27●Closing the Launcher window ................................................................................................................. 27●The Launcher window .............................................................................................................................. 27

Program Creation/EditingThe main Program Editor window ................................................................................................. 29

●Launching Program Editor ...................................................................................................................... 29●The main Program Editor window .......................................................................................................... 29

Creating programs .......................................................................................................................... 31●Valid content files ..................................................................................................................................... 31●Positioning content (Layout) ................................................................................................................... 32●Setting the background/frames 1-4 ....................................................................................................... 36●Setting the scroll message ...................................................................................................................... 40●Setting audio and music .......................................................................................................................... 46●Setting the PIP window ............................................................................................................................ 47●Saving a program ..................................................................................................................................... 47●Opening a program .................................................................................................................................. 49●Checking a program ................................................................................................................................. 49●Preview Program Display Settings ......................................................................................................... 50●Deleting a program ................................................................................................................................... 50●Displaying program properties ............................................................................................................... 51●Importing/exporting a program ............................................................................................................... 52

RSS Editor ........................................................................................................................................ 54● Creating a RSS configuration file .......................................................................................................... 54● Main RSS Editor window ........................................................................................................................ 54● Displaying a preview ............................................................................................................................... 57

Conditional ContentBasic Screens for Conditional Content Editor ............................................................................. 58

●Launching Conditional Content Editor ................................................................................................... 58●Basic Screens for Conditional Content Editor ...................................................................................... 58

Creating Conditional Content ......................................................................................................... 60●Compatible Content File Formats ........................................................................................................... 60●Configuring Conditional Contents .......................................................................................................... 60

Contents

3

Contents

Creating/Editing a TimetableThe main Timetable Editor window ................................................................................................ 66

●Launching Timetable Editor .................................................................................................................... 66●The main Timetable Editor window ........................................................................................................ 66

Creating a timetable ........................................................................................................................ 68●Registering a program in the timetable .................................................................................................. 68●Registering panel control in a timetable ................................................................................................ 69●Adjusting a timetable ............................................................................................................................... 71●Saving a timetable .................................................................................................................................... 72●Opening a timetable ................................................................................................................................. 72●Checking a timetable ................................................................................................................................ 73●Deleting a timetable .................................................................................................................................. 73●Changing timetable name and timetable color ...................................................................................... 73●Importing/exporting a timetable .............................................................................................................. 74

Creating/Editing SchedulesThe main Schedule Editor window ................................................................................................ 76

●Launching Schedule Editor ..................................................................................................................... 76●The main Schedule Editor window ......................................................................................................... 76

Creating a schedule ........................................................................................................................ 78●Registering a timetable in the schedule ................................................................................................. 78●Saving a schedule .................................................................................................................................... 80●Opening a schedule ................................................................................................................................. 80●Deleting a schedule .................................................................................................................................. 81●Changing schedule name ........................................................................................................................ 81●Importing/exporting a schedule .............................................................................................................. 82

Panel Management and OptionManaging panels ............................................................................................................................. 84

●Launching Panel Control Management .................................................................................................. 84●The main Panel Management window .................................................................................................... 84●Adding/editing a panel ............................................................................................................................. 85●Adding/editing a group ............................................................................................................................ 86●Controlling a panel manually .................................................................................................................. 87●Deleting a panel or group ........................................................................................................................ 87

Option ............................................................................................................................................... 88●Launching Option ..................................................................................................................................... 88●Checking version information ................................................................................................................. 88●Adding default panel settings for panels ............................................................................................... 89

Distributing schedulesThe main Schedule Distribution Tool window .............................................................................. 90

●Launching Schedule Distribution Tool ................................................................................................... 90●The main Schedule Distribution Tool window ....................................................................................... 90

Distributing schedules .................................................................................................................... 91●Distributing via a network ........................................................................................................................ 91●Distributing to your own PC .................................................................................................................... 93●Distributing with USB memory or other external storage device ........................................................ 94

Displaying break-in programs ........................................................................................................ 96●Distributing via a network and making a break-in display ................................................................... 96●Distributing to your own PC and making a break-in display ................................................................ 98

List of Reserved Distribution/List of Distribution Log ............................................................... 101●List of Reserved Distribution ................................................................................................................ 101●List of Distribution Log .......................................................................................................................... 101

4

Schedule ManagementServer Scheduler ........................................................................................................................... 103

Schedule Reception/Program DisplayFTP Server ...................................................................................................................................... 104

●Launching the FTP Server ..................................................................................................................... 104Client Scheduler ............................................................................................................................ 105

●Launching Client Scheduler .................................................................................................................. 105●Client Scheduler menu ........................................................................................................................... 105

Distributing content directly by using USB memory or another external storage device ..... 112Program Viewer ............................................................................................................................. 113

Key/Mouse MonitoringKey/Mouse Monitoring Tool Window ........................................................................................... 114

●Launching the Key/Mouse Monitoring Tool window ........................................................................... 114●Key/Mouse Monitoring Tool menu ........................................................................................................ 114

Monitoring statusThe main Status Monitoring Tool window ................................................................................... 117

●Launching Status Monitoring Tool ....................................................................................................... 117●The main Status Monitoring Tool window ............................................................................................ 117

Acquiring and displaying panel status ........................................................................................ 120●Acquiring status of selected panels ..................................................................................................... 120●Setting panels for which status will not be obtained .......................................................................... 121●Controlling viewer PC power ................................................................................................................. 121●Displaying detailed information for a panel ......................................................................................... 122●Changing thumbnail size ....................................................................................................................... 123

Setting the operation environment .............................................................................................. 124

Contents

5

Thank you for purchasing SHARP Digital Signage Software.SHARP Digital Signage Software comes in three versions: The Standalone, Network, and Viewer Versions. This manual covers all three versions. Where editions differ in terms of usage restrictions and functionality, this fact is clearly indicated.

IMPORTANT:To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided.

Model No.:

Serial No.:

U.S.A. ONLY

Precautions on use•Thisproductissubjecttoexactingqualitycontrolandproductinspectionbeforeshipment.Intheunlikelyevent

that a failure or malfunction occurs, contact your retailer.

•PleasenotethatSHARPCORPORATIONbearsnoresponsibilityforanyfailure,malfunction,ordamagesduetoimproperuseofthisproductbythecustomerorathirdparty,exceptwhereindemnityliabilityisrecognizedunder law.

•Undercopyrightlaw,theuseofthisproducttoduplicate,editorotherwisealtercopyrightedmaterialisonlypermitted in cases where such duplicated or edited material is for individual or home use.

If material is duplicated and/or edited beyond this scope, and if such duplicated or edited material is used, (exceptincaseswheretheuserthemselvesholdsthecopyrightfortheobjectoftheduplicatedmaterialorwhere the user has received permission from the copyright holder), this will constitute a violation of copyright law and may lead to the copyright holder or other parties claiming compensation for damages. Such use should therefore be strictly avoided.

When using photo image data, DVD images, TV broadcasts or similar material with this product, the above usesthatconstitutecopyrightviolationshould,naturally,bestrictlyavoided.Using,modifying,orotherwisealtering images of other people without permission constitutes a violation of portrait rights, and should also be strictly avoided.

•WhenshowingTV,DVDs,orsimilarcopyrightedprogramsand/ormaterialyoumustobtainthepermissionofthe copyright holder or copyright holders.

•Transcribingorduplicatingpartorallofthismanualand/orthissoftwarewithoutpermissionfromourcompanyis not permitted.

•Asapartofourpolicyofcontinuousimprovement,SHARPreservestherighttomakedesignandspecificationchangesforproductimprovementwithoutpriornotice.Theperformancespecificationfiguresindicatedarenominal values of production units. There may be some deviations from these values in individual units.

Introduction

6

Trademarks•Microsoft,Windows,WindowsVista,PowerPoint,andWindowsMediaareeitherregisteredtrademarksortrademarksofMicrosoftCorporationintheUnitedStatesand/orothercountries.

•TheMicrosoftInternetExplorerlogoisatrademarkofMicrosoftCorporationintheUnitedStatesandothercountries.

•FlashandFlashPlayerareeitherregisteredtrademarksortrademarksofAdobeSystemsIncorporatedintheUnitedStatesand/orothercountries.

•Intel,Celeron,andPentiumareeitherregisteredtrademarksortrademarksofIntelCorporationand/oritssubsidiariesintheUnitedStatesand/orothercountries.

•QuickTimeandtheQuickTimelogoaretrademarksofAppleComputer,Inc.,registeredintheUnitedStatesand other countries.

Names of products and other proper nouns are the registered trademarks or trademarks of their respective copyright holders.

How to read this manualThis manual describes SHARP Digital Signage Software Version 4.1.

●Icons

indicates reference information, related details, and restrictions.

F indicates pages that contain related information.

●Notation

• Keyboard keys are indicated with square brackets.E.g.[Shift],[Ctrl],etc.

• Menus, windows, dialog boxes, buttons, and tabs etc are indicated with square brackets.E.g.1. From the [Option] menu click [Setting].

The[Setting]dialogboxwillappear.

• Items, check boxes, and option buttons, etc., are indicated with double inverted commas.E.g.“X”,“PresetScreenSize”optionbutton,etc.

• This manual assumes that this product has been installed in the following location.If you have installed the software in a different location, this can be interpreted to refer to the folder where you installed it.

C:\Program Files\SHARP\SHARP Digital Signage Software (default)

• The screenshots and operational procedures in this manual are only examples.These may change depending on your monitor, screen settings, or the version of the OS you are using and otherfactors.ThismanualgivesinstructionsusingWindowsXPasanexample.Thecontentfilesandfontsinthismanualareonlyexamples.Notalloftheseareincludedwiththissoftware.

• This manual does not contain basic operating instructions for Windows.

Trademarks / How to read this manual

7

DefinitionsThischartprovidesdefinitionsoftermsusedinthismanual.

Term Definition

ManagementPCThePCthatisusedtocreateanddistributeprograms,timetablesandschedules.Alsoreferredtoasa“ServerPC”.

ViewerPCAPCthatdisplayscontentaccordingtoaschedule.Alsoreferredtoasa“PanelPC”ora“ClientPC”.“Panel”referstoanLCDmonitorconnectedtoaviewerPC.

Content(files)Material(i.e.files)suchasmovies,stillimages,andaudiofilesthatareplayedonthepanel.These are usually prepared by the user.

PlaylistA list that plays multiple content in a desired order.Containsinformationsuchascontentdata,orderofplay,andduration,etc.

FrameRefers to a sub-screen that is used as a display unit when a single panel is divided into multiple frames.

Scroll messageA scrolling message.Uptotwoscrollmessagescanbedisplayed.

ProgramPrograms consist of a frame layout, multiple frames and their assigned playlist information, scroll message information, etc.

RSSFeed Data that structures website headings and summaries.

TimetableTimetables contain information regarding the order and duration of play for multiple programs that have been assigned to a one-day time frame.

Schedule Schedules contain multiple timetables assigned to desired dates of play.

AttachedfilesThecollectivetermfortheimagefiles,etc,whicharerequiredwhendisplayingHTMLfiles,etc.

System operation precautionsPoints to note when creating content and programsBeforeoperatingthesystem,runatestusingtheactualcontenttobedisplayedonthepanel.IfthePCdoesnothavesufficientprocessingpower,contentmaynotbeplayedcorrectly.

•Movieplayers Playing multiple videos simultaneously is not recommended. WindowsMediaPlayergenerallyplacesaheavierloadontheCPUthanFlashPlayer(althoughthisdepends

on the content).

•Aseparate,fee-basedcodecmaybenecessarytoplayvideofiles. •QuickTimePlayerisrequiredinordertoplayQuickTimecontent.

•Flashcontent Takecarewhenplayingcontentthatmakesfrequentuseofimagetransparencyprocessing(imagefade-in/fade-out),asthismayplaceanextremelyheavyloadontheCPU.

•Enlarging/reducingstillimagesandmovies Asimagesizeanddisplaysizeincrease,sodoestheloadplacedontheCPU.CPUloadalsoincreaseswhenimagesaredisplayedatanenlargedorreducedsize.Keepthesizeofthecontentdisplayarea(framesize)assmallaspossible.Contentshouldalsobecreatedusingthesameimagesizeasthedisplaysize.

•Stillimageswitching UsingstillimageswitchingwillincreasetheloadontheCPU.Itseffectisdependentontheperformanceofthe

video card.

Definitions / System operation precautions

8

•Scrollmessagecontent DisplayingscrollmessagesrequiresagreatdealofCPUprocessingpower.Whenusingscrollmessages,

programs should be tested by actually displaying them before operation.· Making the background color transparent will increase the load.·ScrollmessageswithalargerdisplayareaplacealargerloadonthePC.Donotmakethescrollmessage

display area unnecessarily large.· If there are a lot of characters in a scroll message line, display may become distorted. If this occurs, start a newline.(Upto100charactersperlinerecommended.)

•PowerPoint Set PowerPoint data so that it plays repetitively by setting slide transition to advance slides automatically

(automatic slideshow). PowerPointViewerisnotcapableofsimultaneousmultipledisplay.DonotassignPowerPointfilestomultiple

frames in the same program. It should also be noted that PowerPoint Viewer only proceeds to play slideshows when the focus is on itself. Do not click other frames with the mouse or another tool when PowerPoint content is displayed.

PowerPointViewer2003/2007/2010isrequired.EvenifyoualreadyhaveMicrosoftPowerPoint2003/2007/2010installedonyourPC,youmustmakeaseparateinstallationofPowerPointViewer2003/2007/2010.

PowerPointViewer2010requirestimetostartplayingfiles,especiallywhenstartingthefirstplaybackafterstartingupthePC.Makesuretogiveenoughtimeforplaybacktostart.

Althoughitispossibletoplayfileswitha.pptxor.ppsxextensionusingPowerPointViewer2007,itwilltakeawhile to start playback.

Itisrecommendedthatfileswitha.pptor.ppsextensionareusedwhenplayingonPowerPointViewer2007.

Continuous operation of viewer PCThissoftwareisnotdesignedforcontinuous24-hour-a-dayoperation.BesuretorebootontheviewerPCeveryday.(RefertoPowerControlonp.86)

PC internal clockThissoftwareexecutesschedulesbasedonthePC’sinternalclock.YoushouldensurethatyourPC’sinternalclockisalwaysaccuratebysynchronizingitwithaninternettimeserverorothermeans.

Accuracy of program display timeProgramdisplayiscontrolledbyatimerthatstartsat0secondseveryminute.Programscannotbeswitchedatintervalsoflessthan1minute,orduringa1minuteinterval(i.e.inintervalsoflessthan60seconds).Be aware that there may be some delay before content is actually displayed depending on the time taken to launchapplicationsthatdisplaycontentandthetimetakentoloadcontentfiles.

BackupsThissoftwaredoesnothaveabackupfunction.Youshouldmakeregularbackupcopiesofcontentfiles,etc., during operation.

Daisy chain configurationThe Network Version of SHARP Digital Signage Software can send different panel control commands (monitor powersupplyON/OFFandpanelinputcommands)toSHARPLCDMonitors(PNSeries)connectedinadaisychain.(RefertoPanelManagementandOption,p.84)

System operation precautions

9

Still imagesDisplaying a still image in the background or in a frame in the same position for a long time may leave a residualimage on the monitor. When creating programs or timetables, you should take measures such as changing stillimages and layouts at set intervals to avoid this problem.

Date displayThissoftwaredisplaysthedateinYYYY/MM/DDformat.

System operation precautions

10

Features of SHARP Digital Signage SoftwareSHARP Digital Signage Software is SHARP’s original content distribution and display software.

Easy-to-use user interfacePrograms can be laid out in editable time schedules similar to newspaper TV guides or calendar-style monthly schedules.

Variety of display options and scroll message functionFrameswithcompletelycustomizablelayout(x4,)aswellasbackgroundsandscrollmessages(x2)canbeused.Verticalscrollmessagesarealsosupported,allowingeffectiveexpressionandinformationdisplay.

Reserved distribution functionMakesitpossibletodistributereservedcontentoveranLCDmonitornetwork.

Monitor control and break-in distribution functionsTurn monitors on and off and distribute break-in programs during emergencies for smooth monitor control.

Program distribution workflowThis chart details the process from program creation to the stage where programs can be displayed on a panel.

Standalone Version

Lay out your chosen content and create a program. (p.29)

1 Program Editor

Assign the hour of the day that your program will be shown. (p.66)

2 Timetable Editor

Assign the dates when daily timetables you have created will be shown. (p.76)

3 Schedule Editor

Distribute schedules and programs you have created to Client Scheduler. (p.90)

4 Schedule Distribution Tool

Control Program Viewer so that it displays schedules and programs at a set time. (p.105)

5 Client Scheduler

Program Viewer displays programs when instructed to do so by Client Scheduler. (p.113)

6 Program Viewer

Program displayed

You can distribute to a viewer PC that has Program Viewer installed by using USB memory or other external storage devices. (p.112)

(Standalone Version)

Features of SHARP Digital Signage Software / Program distribution workflow

11

Network Version

Lay out your chosen content and create a program. (p.29)1 Program Editor

Assign the hour of the day that your program will be shown. (p.66)2 Timetable Editor

Assign the dates when daily timetables you have created will be shown. (p.76)3 Schedule Editor

Distribute schedules and programs you have createdto a viewer PC connected to the network. (p.90)

4 Schedule Distribution Tool

Control the distribution schedule and distribute scheduled times to the FTP server. (p.103)

Server Scheduler

The FTP server passes schedules and programs it receives to Client Scheduler. (p.104)

5 FTP Server

Control Program Viewer so that it displays schedules and programs at a set time. (p.105)

6 Client Scheduler

Program Viewer displays programs when instructed to do so by Client Scheduler. (p.113)

7 Program Viewer

Program displayed

Management PC (Network Version)

Viewer PC(Viewer Version)

You can distribute to a viewer PC that has Program Viewer installed by using USB memory or other external storage devices. (p.112)

Schedules and programs can be loaded from USB memory or other external storage devices. (From )

Distributed via a network

Obtain panel status data and control viewer PC power. (p.117)

Status Monitoring Tool

Program distribution workflow

12

Installing/LaunchingThis section provides installation instructions and information regarding the necessary operating environment, as well as instructions on how to start and close down SHARP Digital Signage Software. Be sure to read this before using the software.

Required operating environment

Item Description

PCCPU:CeleronM1.3GHzorhigher2GHzorhigherPentium4processoror1.6GHzorhigherAtom330dualcoreprocessorisrequiredformovie/content-heavyprograms.

OSMicrosoftWindowsXP,WindowsVista,Windows7(Englishversion),WindowsServer2003/2008(Englishversion)

Memory 256MBorhigher(512MBorhigherrecommended)Hard disk 20MBormorefreespace(Additionalspacerequiredforsavingdata)Monitor(formanagementPC)*1 Fullcolordisplaywithresolutionofatleast1024x768

Monitor(forviewerPC)*2PNseriesLCDmonitorLB-1085*3

Interfaces•USBport(onlyrequiredifusingUSBmemory)•LANport(onlyrequiredforNetworkVersion[TCP/IPcommunicationmustbefunctional])

Others

MicrosoftInternetExplorer6.0orlaterPowerPointViewer2003/2007/2010Windows Media Player 9 or laterFlashPlayer6orlaterQuickTimePlayer7orlater(inordertoplayQuickTimecontent)

IfthereareanyenvironmentalrequirementsfortheOStooperatebesidestheabove,theymustalsobemet.If the OS of the viewer PC is Windows Vista or Windows 7, disable the user account control of the viewer PC.*1 Usedforcreating/editingprogramsandschedules.*2 UsedtodisplayprogramswiththeStandaloneandViewerVersions.

Panelcontrolcanbeperformed.Toperformpanelcontrol,theviewerPCandthepanelmustbeconnectedwithanRS-232CcableorthepanelmustbeconnectedtotheLAN.Forthespecificationsofthepanelandits connection and setting methods, read the operation manual of your panel.

*3 ToperformpanelcontrolwiththeLB-1085,performa“Testconnection”oncewiththeSHARPDigitalSignageSoftwareClientScheduler(Fp.109).

Thepanelcontrolcannotbeperformedunlessa“Testconnection”isperformed.

•WhencontrollingtheviewerPCmanually(whenturningthepanelPCon),theWakeOnLANfunctionthatoperatesbyMagicPacketsfromtheviewerPCmustbeenabled.

IftheviewerPCisoutsidethesameLANsegment,MagicPacketsmaynotgetthroughdependingonrouterspecs/settings.Contactyournetworkadministratorformoredetails.

•Regardlessofwhichversionofthissoftwareyouareusing,youmusthaveFlashPlayer,WindowsMediaPlayer,andPowerPointViewer2003/2007/2010installedonthePConwhichthissoftwareisinstalled.

If you have not installed all of these programs, or have installed different versions of them, a message prompting you to install may appear. If this happens, download the appropriate programs from the relevant website and install them.

•Aseparate,fee-basedcodecmaybenecessarytoplayvideofiles.

13

Installing SHARP Digital Signage Software

Youmustloginasanadministratorbeforebeginningtheinstallationprocess.

●Installing SHARP Digital Signage Software1. Start your PC2. Close down all applications.3. Launch the SHARP Digital Signage Software setup program (setup.exe).

Double-clickthesetup.exefiletolaunchthesetupprogram.

Ifasecuritywarningsaying‘Thepublishercouldnotbeverified.’isdisplayedduringtheinstallation,click[Run].

If using the “SHARP Digital Signage Software CD-ROM”1) If the setup program is launched automatically, proceed

to step 4. If the setup program does not launch after a fewmoments,launchtheSetup.exefileintheCD-ROMfolder.

2) Inthe[AutoPlay]dialogbox,click“Runsetup.exe”. Ifthe[AutoPlay]dialogboxdoesnotappear,double-click

theSetup.exefileintheCD-ROMfolder.

3)Whenthe[UserAccountControl]dialogboxappears,click[Allow](forWindowsVista)or[Yes](forWindows7).

4. In the [Welcome to the Install Shield wizard...] window, click [Next].


14

5. Software license agreement will appear. Read the entire software license agreement.

6. If you agree to the terms of the agreement, select the “I accept the terms of the license agreement” option button, and click [Next].

7. Select the version that you have purchased and click [Next].The three following versions are available:• StandaloneVersion Forcreatingprogramsanddistributing/displayingschedules

withasinglePC.• NetworkVersion ForuseonamanagementPCtocreateprograms,distribute

schedules, and check panel status. Also used for distributing programs and schedules to viewer

PCsrunningthe“ViewerVersion”.• ViewerVersion Only installs software for content display. ForuseonaviewerPC.Displaysreceivedprogramsaccordingtoaschedule.

•DigitalSignageProexpandsthefunctionalityofDigitalSignageSoftwareNetworkVersion(PN-SS02),withenhancedfunctionsforprogramcontrolanddistribution.TouseDigitalSignagePro,it must be purchased separately. Please contact your dealer.

•DigitalSignageSoftwareProWebServerusesawebservertocontroldistributionfrommultiplePCsorsitestomultipledisplays.TouseProWebServer,itmustbepurchasedseparately.Please contact your dealer.

8. Enter the appropriate license code for your version and click [Next].

If you entered a temporary license code, you will only be abletousethesoftwareforatwo-monthtrialperiod.Youshould register the license code you obtained before the end of the trial period.

•IfyouareusingtheStandaloneorNetworkVersion,licensecodescanberegisteredusingthe[RegisterLicenseCode]dialogboxfromthe[Option]menu.(Fp.88)

•IfyouareusingtheViewerVersion,licensecodescanberegisteredfromthe[Version]dialogboxinClientScheduler.(Fp.112)

9. Click [Next].

If you want to change the location where the installation will bemade,click[Change]andspecifyadifferentdirectory.


15

10. Click [Install].The installation will start.

11. Click [Finish].The installation is now complete.

Ifthefollowingscreenappears,click[Yes]torestartyourPC.

If you are using the Standalone or Network Versions, a shortcut to SHARP Digital Signage Software will be created on your desktop.

IfyouareusingtheStandaloneorViewerVersions,ClientScheduler( ) will launch and appear in the Task Tray.If you are using the Network Version, Server Scheduler ( )andClientScheduler( ) will launch and appear in the Task Tray.


16

●Setting the environment of the viewer PC Oncetheinstallationiscomplete,changethesettingsoftheviewerPCbeforeusingthissoftware.Adescriptionisgivenbelow,usingWindowsXP/Vista/7asanexample.

Auto login settingsIftheviewerPCistobeusedwithoutanoperator,Windowsautologinshouldbeenabled.ThefollowingisanexampleusingWindowsVista.

1. From the Windows Taskbar, click [Start], [All Programs], [Accessories], and then [Command Prompt].The[CommandPrompt]windowwillappear.

2. Type in “control userpasswords2” (without the inverted commas) and push [Enter].

3. If the [User Account Control] window appears, click [Continue].The[UserAccounts]dialogboxwillappear.

4. Clear the “Users must enter a user name and password to use this computer” check box.

5. Click [OK].

6. In the [Automatically Log On] window, enter a “User Name” and “Password”, and click [OK].

7. Type in “exit” and then press [Enter].


17

Welcome Center settings (Windows Vista only)

ThesesettingsdonotapplytoWindowsXP/7.

Underdefaultsettings,the“WelcomeCenter”isdisplayedwhenWindows Vista is started.Clearthe“Runatstartup”checkbox,tostopthe“WelcomeCenter”frombeingdisplayedwhenaprogramisdisplayedinProgramViewer.The“WelcomeCenter”willnotappearfromthenexttimethePCisstarted.

If“WelcomeCenter”isclosedyoucandisplayitusingeither of the following methods.

•FromtheWindowsTaskbar,click[Start],[ControlPanel],[SystemandMaintenance],andthen[WelcomeCenter].

•FromtheWindowsTaskbar,click[Start],[AllPrograms],[Accessories],andthen[WelcomeCenter].

Screen saver settingsDisable the screen saver so that it does not display on the monitor when a program is displayed in Program Viewer.

•If using Windows XP1. Right-click on an empty area of the desktop, and from the menu that appears, click [Properties].

The[DisplayProperties]dialogboxwillappear.2. Click the [Screen Saver] tab and select “(None)” from the

“Screen saver” list.3. Click [OK].


18

• If using Windows Vista/71. Right-click on an empty area of the desktop and from the menu that appears, click [Personalize] and

then [Screen Saver].The[ScreenSaverSettings]dialogboxwillappear.

2. Select “(None)” from the “Screen saver” list.3. Click [OK].

Power controlAdjustsettingssothatthepanelorharddiskdonotturnofforgointosystemstandbywhileaprogramisdisplayed in Program Viewer.

• If using Windows XP1. From the Windows Taskbar, click [Start], [Control Panel], [Performance and Maintenance], and then

[Power Options].The[PowerOptionsProperties]dialogboxwillappear.

2. Select “Never” from the “Turn off monitor”, “Turn off hard disks”, and “System standby” pull-down menus on the [Power Schemes] tab.

3. Click [OK].


19

• If using Windows Vista1. From the Windows Taskbar, click [Start], [Control Panel], [System and Maintenance], and then

[Power Options].The[PowerOptions]dialogboxwillappear.

2. Select “High performance” and click [Change plan settings].

3. Select “Never” from the “Turn off the display” and “Put the computer to sleep” lists.

4. Click [Save changes].Returntothe[PowerOptions]dialogbox.

5. Close the [Power Options] dialog box by clicking the button in the upper right corner of the window.

• If using Windows 71. From the Windows Taskbar, click [Start], [Control Panel], [System and Security], and then [Power

Options].The[PowerOptions]dialogboxwillappear.

2. Click “Show additional plans” select “High performance” and click [Change plan settings].

3. Select “Never” from the “Turn off the display” and “Put the computer to sleep” lists.

4. Click [Save changes].Returntothe[PowerOptions]dialogbox.

5. Close the [Power Options] dialog box by clicking the button in the upper right corner of the window.

Windows Sidebar (Gadget) settings (Windows Vista Only)

ThesesettingsdonotapplytoWindowsXP/7

AdjustWindowsSidebar(Gadget)settingssothattheSidebar(Gadgets)isnotdisplayed.

1. Right-click on an empty area of the Windows Sidebar, and from the menu that appears, click [Properties].The[WindowsSidebarProperties]dialogboxwillappear.


20

2. Clear the “Start Sidebar when Windows starts” check box.

3. Click [OK].4. Restart your PC.

TheWindowsSidebar(Gadgets)willnolongerappearfromthenexttimeyoustartWindowsVista.

Active desktop settings (Windows XP Only)Turn Active desktop settings off.

These settings do not apply if you are using Windows Vista.

1. Right-click on an empty area of the desktop, and from the menu that appears, click [Properties].The[DisplayProperties]dialogboxwillappear.

2. Click the [Desktop] tab, and then click [Customize Desktop].The[DesktopItems]dialogboxwillappear.

3. Click the [Web] tab and clear all the check boxes under “Web pages”.

4. Click [OK].

IME Toolbar settingsThesesettingsarenotrequirediftheIMEToolbarisnotdisplayed.StoretheIMEToolbarintheTaskbarsothatitisnotdisplayedwhenaprogramisbeingdisplayedinProgramViewer.1. Right-click on the IME Toolbar and, from the menu that appears, click [Minimize]. You can also click to minimize the Toolbar.


21

Taskbar settings (Windows XP/Vista only)AdjusttheTaskbarsettingssothattheTaskbarisnotdisplayedwhenaprogramisbeingdisplayedinProgramViewer.1. Right-click on an empty area of the Taskbar, and from the menu that appears, click [Properties].

The[TaskbarandStartMenuProperties]dialogboxwillappear.2. Under “Taskbar appearance” on the [Taskbar] tab, clear

the “Auto-hide the taskbar” and “Keep the taskbar on top of other windows” check boxes.

3. Click [OK].

Windows Update settingsSetWindowsUpdatesothatitdoesnotupdateautomaticallyanddisplaypopupmessages(dialogboxes),etc.,while a program is being displayed in Program Viewer.

Ifyouhavedisabledautomaticupdates,remembertochecktheWindowsUpdatewebsite (http://windowsupdate.microsoft.com/) regularly and download and install updates manually. Not installing the latest updates is a security risk and may also lead to performance related issues.

• If using Windows XP1. From the Windows Taskbar, click [Start], [Control Panel], [Performance and Maintenance], and then

[System].The[SystemProperties]dialogboxwillappear.

2. Click the [Automatic Updates] tab and select the “Turn off Automatic Updates” option button.

3. Click [OK].


22

• If using Windows Vista1. From the Windows Taskbar, click [Start], [Control Panel], [Security], and then [Turn automatic

updating on or off].The[Changesettings]dialogboxwillappear.

2. Select the “Never check for updates” option button.3. Click [OK].

4. If the [User Account Control] window appears, click [Continue].The[Changesettings]dialogboxwillclose.

• If using Windows 71. From the Windows Taskbar, click [Start], [Control Panel], [System and Security], and then [Turn

automatic updating on or off].The[Changesettings]dialogboxwillappear.

2. From the menu of “Important updates,” select the “Never check for updates (not recommended)” option button.

3. Click [OK].

4. If the [User Account Control] window appears, click [Yes].The[Changesettings]dialogboxwillclose.

Resident application settingsAdjustsettingsforresidentapplications(e.g.virusscanners)sothattheydonotdisplaypopupmessages(dialogboxes)whenaprogramisbeingdisplayedinProgramViewer.


23

Personal firewall settingsIfyouplantodistributecontentoveranetwork,youmustfreeaTCP/IPportforthissoftwaretousewhenthedistributionportisassignedtoapersonalfirewall.

IfyouhaveinstalledtheViewerVersion,auniqueFTPserverwillbeinstalled,andstartedasaservice.ThedefaultTCP/IPportnumbersare20and21.Ifyouchangetheportnumber,youmustalsochangetheFTPsettingsforthemanagementPC(Fp.86),andtheFTPsettingsforClientSchedulerontheviewerPC(Fp.107)tothesameportnumber.

Firewall settings for Status Monitoring Tool (Windows Vista/7 Only)IfusingWindowsVista/7,usethefollowingproceduretochangethesesettings.1. From the Windows Taskbar, click [Start], [Control Panel], [System and Maintenance] (for Windows

Vista) or [System and Security] (for Windows 7), and then [Administrative Tools].

2. Double-click “Windows Firewall with Advanced Security”.

3. If the [User Account Control] window appears, click [Continue] (for Windows Vista) or [Yes] (for Windows 7).The[WindowsFirewallwithAdvancedSecurity]dialogboxwill appear.

4. On the left of the window, click [Inbound Rules], then click “New Rule” under [Actions] in the pane on the right of the window.The[NewInboundRuleWizard]dialogboxwillappear.


24

5. Select the “Custom” option button, and click [Next].

6. Select the “All programs” option button, and click [Next].

7. From the “Protocol type” list, select “ICMPv4”.

8. Set “Protocol and Ports”, “Scope”, “Action”, and “Profile” in order as necessary. Click [Next] to be taken to the settings screen for the next step.

Confirmwithyournetworkadministratorbeforeadjustingthesesettings.

9. Enter a “Name”, and click [Finish].

10. Close the dialog boxes by clicking the button at the top right of each window.


25

●Uninstalling SHARP Digital Signage SoftwareIfthissoftwarefrequentlyshutsdownincorrectlywhenaprogramisbeingdisplayedorcreated,youshouldmodify the program. If the problem persists even after doing so, we recommend uninstalling, then reinstalling this software.

Uninstallingthissoftwarewillnotdeleteanyprograms,schedulesorcontentfilesthatyouhavealreadycreated.Youwillbeabletousethesefilesagainuponreinstallingthissoftware.

1. Start your PC.2. Close down all applications.3. Launch the SHARP Digital Signage Software setup maintenance program (setup.exe).

Double-clickthesetup.exefiletolaunchthesetupmaintenanceprogram.

Ifasecuritywarningsaying‘Thepublishercouldnotbeverified.’isdisplayedduringtheinstallation,click[Run].

If using the “SHARP Digital Signage Software CD-ROM”1) If the setup program is launched automatically, proceed

to step 4. If the setup maintenance program does not launchafterafewmoments,launchtheSetup.exefileintheCD-ROMfolder.

2) Inthe[AutoPlay]dialogbox,click“Runsetup.exe”. Ifthe[AutoPlay]dialogboxdoesnotappear,double-click

theSetup.exefileintheCD-ROMfolder.

3)Whenthe[UserAccountControl]dialogboxappears,click[Allow](forWindowsVista)or[Yes](forWindows7).

4. Select the “Remove” option button, and click [Next].

Ifyouselectthe“Modify”optionbutton,youwillhavetore-enter a license code.


26

5. Click [Yes].The uninstallation will start.

IftheServerSchedulerortheClientSchedulerhasbeenstarted,amessagewillappear.Inthiscase,click[Yes].TheServerSchedulerandtheClientSchedulerwillbeforciblyterminatedandtheuninstallation will continue.

6. Click [Finish].The uninstallation is now complete.


27

Launching and closing the Launcher window

●Launching the Launcher window1. On the desktop, double-click the short cut.

TheLauncherwindowwilllaunch.

TheLaunchercanalsobestartedbygoingtotheWindowsTaskbarandclicking[Start],[AllPrograms],[SHARPDigitalSignageSoftware],andthen[SHARPDigitalSignageSoftware].

●Closing the Launcher window1. Click on the Launcher window.

TheLauncherwindowwillclose.

●The Launcher windowTheLauncherwindowisthewindowfromwhichoperationsarestarted.Therearesixbuttonsfordifferentfunctionssuchasprogramcreationandprogramdistribution.

Ifanothertoolordialogboxisalreadylaunched,itwillbedisplayedintheforeground.

2) Program creation/editing

3)Timetable creation/editing

4) Schedule creation/editing

5) Schedule distribution

6)Panelcontrol 7)Option

1) Button description window

1) Button description windowWhenthecursorisplacedoverabutton,anexplanationofthebutton’sfunctionisdisplayedinthiswindow.

2) Program creation/editing (Fp.30)Thisbuttonlaunches“ProgramEditor”.ProgramEditorletsyoucreateprogramsbysettingscreensizesandlayouts, as well as content and scroll messages.


28

3) Timetable creation/editing (Fp.66)Thisbuttonlaunches“TimetableEditor”.TimetableEditorletsyoucreateone-daytimetablesbyassigningprograms you have created to be shown at desired times.

4) Schedule creation/editing (Fp.76)Thisbuttonlaunches“ScheduleEditor”.ScheduleEditorletsyoucreateschedulesbyassigningtimetablesyouhavecreatedtobeexecutedondesireddates.

5) Schedule distribution (Fp.90)Thisbuttonlaunches“ScheduleDistributionTool”.ScheduleDistributionToolletsyousendtheschedulesyouhavecreatedtospecifiedpanels.

6) Panel control (Fp.84)Thisbuttonlaunchesthe[PanelManagement]dialogbox.WhendistributingprogramstomultiplepanelsusingtheNetworkVersion,youcanregisterandcontrolpanelsfromthisdialogbox.

This function is only available with the Network Version.

7) Option (Fp.88)Thisbuttonlaunchesthe[Option]dialogbox.ThisdialogboxdisplaysversioninformationabouttheLauncher,and also lets you register license codes.


29

Program Creation/EditingCreateprograms(content)todisplayonapanel.

The main Program Editor window

●Launching Program Editor1. Click on the Launcher window.

“ProgramEditor”willlaunch.

AssoonasProgramEditorlaunches,fourpre-definedframesandtwoscrollmessagesforcreatingnewprograms will be displayed in the main window. Programs are completed by setting program content in this window.

•ProgramEditorcanalsobestartedbygoingtotheWindowsTaskbar,andclicking[Start],[AllPrograms],[SHARPDigitalSignageSoftware],[Tools],andthen[ProgramEditor].

•ThefirsttimeProgramEditorislaunched,the[ContentPreview]windowwillappear.(Fp.38) •IfQuickTimePlayerandPowerPointViewerarenotinstalled,amessagewillappear.

●The main Program Editor window

1) Title barThe name of the program will be displayed here. WhenProgramEditorlaunches,thetitlebarwillread“Untitled”.Whenaprogramissaved,itwillchangetothename of the program. When content of an opened program is changed, the title bar will display an asterisk (*) after the program name.

1) Title bar

2) Menus

3)Toolbar

4) Tabs

5) Settings window

Program Editor

30

Program Editor

2) MenusMenu options are as follows:

Menu option Description Relevant page

File

CreateNewProgram Opens a new program. -Open Program Loadsasavedprogram. Fp.49Save Program Overwrites the currently edited program. Fp.47Save Program As Saves the currently edited program under a different name. Fp.48Delete Program Allows the user to specify and delete programs. Fp.50

Properties of ProgramDisplays program properties and allows the user to change them. Fp.51

Import ProgramReadsaprogramthathasbeenexportedfromanotherPCso that it can be used. Fp.53

ExportProgramWrites out a saved program so that it can be used on anotherPC. Fp.52

Exit ExitsProgramEditor. -

View

Preview Program[Originalsize]

Displays a preview of the currently edited program at its originalsize. Fp.49

Preview Program[Fitscreen]

Displaysapreviewofthecurrentlyeditedprogramfittedtothesizeofthescreen. Fp.49

SetConfigurationbeforePreview Program

Checkthisoptiontosetdisplayconditionswhenpreviewingprograms. Fp.50

ShowContentPreviewWindow

Shows/hidesthe[ContentPreview]window. Fp.38

RefreshUpdatestheContentfoldertoreflectadditionsordeletionsofcontentfiles.

-

Option Setting

Allowstheusertofinetunegridsettingsforpositioningframes and scroll messages with the grid.When using the Pro Web Server Version, check this check box.Bydefault,thischeckboxisnotchecked.

Fp.35

Help AboutProgramEditor DisplaysversioninformationforProgramEditor. -

3) ToolbarThe toolbar buttons perform the following actions:

Icon Menu option Description Relevant page

Open Program Loadsasavedprogram. Fp.49

Save Program Overwrites the currently edited program. Fp.47

Properties of ProgramDisplays program properties and allows the user to change them Fp.51

Preview Program[Originalsize]

Displays a preview of the currently edited program at its originalsize. Fp.49

Preview Program[Fitscreen]

Displaysapreviewofthecurrentlyeditedprogramfittedtothesizeofthescreen. Fp.49

4) TabsClickingatabswitchestothesettingswindowforeachitem.

5) Settings windowAllows the user to set advanced settings for the selected tab.

The main Program Editor window

31

Program Editor

Creating programs

●Valid content filesFiletypesthatcanbeusedascontentareasfollows:

Content name File typeBackground,Frames1-4

MPEG,MPEG-1,MPEG-2,MPEG-4,WMV(WindowsMediaVideo–filetypeplayablewithWindowsMediaPlayer),Flash(filetypeplayablewithFlashPlayer),Conditionalcontent(.dcv)forbackground,frames,MOV(filetypeplayablewithQuickTimePlayer),PowerPoint,HTML,JPEG,BMP,GIF,PNGRSSconfigurationfile(.erc)

Scroll messages 1-2 ScrollmessagescreatedinScrollMessageEditor,Conditionalcontent(.dct)forscrollmessages

Audio WAVE,MP3,AU,AIFF,WMA(WindowsMediaAudio–filetypeplayablewithWindowsMediaPlayer),MOV(filetypeplayablewithQuickTimePlayer),MIDI,Conditionalcontent(.dca)foraudio

Audiofilescannotbepositionedinthelayout.Theyareusedasaudioormusic(backgroundmusic)thatplays while a program is displayed.

Contentfilesarerecognizedbytheirfileextensions.Certainfiletypesrequiretheinstallationofcorrespondingsoftware.

File extension Content type Required software.avi .mpeg .mpg .wmv .asf

MovieWindows Media Player

.mov* QuickTimePlayer

.swf Flash FlashPlayer

.ppt .pps .pptx .ppsx PowerPoint PowerPoint Viewer

.htm .html HTML InternetExplorer

.tlp Scroll message None

.wav .mp3 .au .aif .aiff

.wma .mid .midi AudioWindows Media Player

.mov* QuickTimePlayer

.jpeg .jpg .gif .png .bmp Still image Noneerc RSSconfigurationfile None

*InthecaseofWindows7,youcanplaycontentfilesusingWindowsMediaPlayer. However,ifQuickTimePlayerisnotinstalledonthePC,thecontentmaynotbedisplayedcorrectly. Therefore,itisrecommendedthatQuickTimePlayerbeinstalled.

•TheJPEGfilesupportstheRGBformatbutdoesnotsupporttheCMYKformat.Inaddition,JPEG2000is not supported.

•AnimationGIFisnotsupported. •TwoormorePowerPointfilescannotbedisplayedatthesametime. •ThePowerPointcontentdoesnotsupportthefollowing:

Executionofmacros,executionofprograms,displayoflinkobjects,displayofembeddedobjects •IftoomanyanimationsareusedinthePowerPointcontent,displayedcharactersmaybeillegible. •ThefontusedinthecontentmustalsobeinstalledontheviewerPC. •TheHTMLfileandtheWebpagecannotbeenlargedorreduced. •Adjustmentofthesoundvolumesupportsvideoandaudio.ItdoesnotsupportFlashandPowerPoint.

Creating programs

32

Program Editor

●Positioning content (Layout)Screensandcontentsizeandposition,etc.,aresetinthe[Layout]window.

When“LayoutLocked.”isdisplayedinthecenterofthelayoutwindow,thelayoutcannotbeedited.

Clearthe“Thelayouteditislocked.”checkboxinthe[PropertiesofProgram]dialogbox(Fp.51).1. Check that the [Layout] tab is selected.

Ifitisnot,clickthe[Layout]tabtoselectit.

2. Set a [Screen Top-Left Position].Set the coordinates (-9999 - 9999) for where you want the top left hand corner of the background to be positioned in the panel.“X”and“Y”areusuallysetto“0”.(Default)

3. Set the “Screen Size”.Thescreensizeisthesizeofthebackground.Selectthe“PresetScreenSize”optionbutton,andchooseasizefromthelist.Thisisusuallysettothesizeofthepanel(i.e.panelresolution).

•Ifthesizeyouwantisnotinthelist,selectthe“CustomScreenSize”optionbutton,andenterasize.

•Tochangethepresetscreensizesinthelist,editthe“ScreenSize.dat”filefoundinthefolderwhereyouinstalledthissoftware(thedefaultdirectoryis,C:\ProgramFiles\SHARP\SHARPDigitalSignageSoftware)specifyingsizesinorderof“width”then“height”asintheexamplesbelow.

1280,1024 1920,1080 1366,768 WhenyoustartProgramEditorthescreensizeonthefirstlinewillbeselected. •If you want to combine multiple panels and have

themdisplayedasonepanel,click[CalculatescreensizeforMultidisplay]andsetthescreensizesimplybyselectingthemodelnameanddirection.

•Whenyouclick[CalculatescreensizeforMultidisplay],the[MonitorSettings]dialogboxwillappear.YoucansetModelName,CompositionandDirection for multiple monitors.

[Layout]window

Creating programs

33

Program Editor

4. Set [Frame Layout].1)Checkthecheckboxesbesidetheframes,scroll

messages, or PIP that you want to display.

Youcanalsoclickthe button at the top right hand corner of a display frame, PIP frame or scroll message to hide it.

2)Set“X”,“Y”,“Width”,and“Height”coordinatesforeachframe or scroll message.

•Only“X”and“Y”coordinatescanbeadjustedforthePIPframe.ToadjustthesizeofthePIPframe,drag your mouse over the layout window (See below).

•Clickonadisplayframe,PIPframeorascrollmessagetoselectit.Eightresizehandleswillappear around the border of the frame. By dragging thesehandleswiththemouse,youcanresizeadisplay frame, PIP frame or scroll message, and confirmchangesvisually.

The display frame, PIP frame and scroll messages can be moved by dragging an area other than the resizehandleusingthemouse.

·Draggingwhileholdingdown[Shift]allowsyoutoresizeaframewhilekeepingthesameaspectratio.

·Youcanalsomoveframesorscrollmessagesusingthearrowkeys. · Youwillstillbeabletoadjustthesizeofaframeifyouholddown[Shift]whileusingthearrowkeys. · Youcanalsoclickthe[PinP]tab,andspecifya“Value”forthe“Size”under“Key”toadjustthe

sizeofaPIPframe. •Youcanmoveorresizeitemsaccuratelybyaligningthemwiththegrid.(Fp.35)

Creating programs

34

Program EditorCreating programs

E.g.Frame1: X=25, Y=20, Width=1338, Height=835Frame2: X=1380, Y=25, Width=523, Height=830Message1: X=20, Y=869, Width=1883, Height=194PIP: X=578, Y=395The above coordinates would produce a layout like the screenshot below.

•The name, position and dimensions

(X coordinate of top left corner,

Ycoordinateoftopleftcorner,width,

height) are displayed in the top left of

each frame or scroll message.

•The PIP frame cannot be moved in

1 pt increments. Locations where

items can be positioned depend on

thekindofLCDmonitorused.

35

Program Editor

Using the gridUsingthegridmakesiteasytopositionitemsaccurately.Itemscanbedraggedwiththemouseandalignedonthe grid. The grid can be set with the following procedure:1. From the [Option] menu click [Setting].

The[Setting]dialogboxwillappear.2. Set the “Frame Layout”.

Checkthe“FramepositioninGrid”checkboxtousethegrid.Clearthecheckboxtopositionframesin1ptincrements.

3. Set the “Interval” for the grid.Enterawholenumberbetween2-100pt.(Thedefaultvalueis8pt)

•Showorhidethegridbycheckingorclearingthe“ShowGrid”checkbox.Evenifthegridishidden,ifyouhavecheckedthe“FramepositioninGrid”checkbox,frameswillbealignedtothegridwhenmovedorresized.

•Evenifyouhavecheckedthe“FramepositioninGrid”checkbox,youwillbeabletoignorethegridandmove items in 1 pt increments by doing the following:

·Dragginganitemwhileholdingdown[Ctrl].Thiswillallowyoutoignorethegridwhenresizing. ·Dragginganitemwhileholdingdown[Shift]+[Ctrl].Thiswillallowyoutomaintaintheaspectratioofa

framewhileyouresizeitandignorethegridatthesametime. ·Holdingdown[Ctrl]whileusingthearrowkeys.Thiswillallowyoutomoveitemsin1ptincrements. ·Holdingdown[Shift]+[Ctrl]whileusingthearrowkeys.Thiswillallowyoutoresizeitemsin1pt

increments.

Display priority order

Background

Frame1

Frame2

Frame3

Frame4

If frames overlap when a program is displayed, programs will be displayed in the following order from foreground to background.“Frame4” → “Frame3” → “Frame2” → “Frame1” → “Background”

•Thedisplaypriorityordercannotbeset. •IfthecontentoftheframeorbackgroundisaPowerPoint

file,EXEfileorRSSconfigurationfile,itwillbedisplayedin the foreground, regardless of the display priority order.

•Scrollmessagesaredisplayedaheadofthebackground,frame.

•Inallcases,thePIPframeisdisplayedaheadofthebackground,frame,andscrollmessages. •Ifmoviesaredisplayedinthebackground,theymaybedisplayedinfrontofotherframesinsome

cases. Set movies in frames 1-4, not the background.

Using a layout you have createdClick[SaveLayout]tosavetheLayoutyouhavecreated.Thenexttimeyoucometocreateaprogramyouwillthenbeabletoclickon[OpenLayout]tousethesavedlayout.

When you save a layout, frame settings are not saved. OnlyScreenTop-LeftPosition,ScreenSize,andFrameLayoutaresaved.

Creating programs

36

Program Editor

●Setting the background/frames 1-4 Set content, order of play and duration for content in the background and frames 1-4.

“ContentFolder”tree

“ContentFile”listPlaylist

1. Click any of the [Background] or [Frame1] – [Frame4] tabs.

2. From the “Content Folder” tree, select the folder where the content files you want to use are located.Confirmthatthe[Content]tabisselected.Ifthetabisnotselected, click on it.

Youcanalsodisplaycontentbyspecifying“URL”or“ViewerPath”. The [URL] tab

DisplaystheHTMLofaspecifiedURLascontent.EnteraURLthatcanbereferencedbytheviewerPC.IfyourPCcanconnecttotheInternet,clicking[ViewURL]willconnecttotheURLyouhaveentered.CheckthatyouhaveconnectedproperlyandthattheURLhasbeendisplayedcorrectly.

•UsediscretionwhendisplayingURLsaswebsitesaresubjecttocopyright. •Ifthepageyouwanttodisplaycontainserrorsitwillnotbedisplayedcorrectly. •Ifthepagethatyouwanttodisplayrequiresaplug-intheviewerPCmusthavetheplug-in

installed.

Creating programs

37

Program Editor

[Viewer Path] tabDisplaysthecontentfilespecifiedwith“FilePathOnViewerPC.”YoucanspecifyanEXEfile.EnterapaththatcanbereferencedbytheviewerPC.ForanEXEfile,“Parameters”canbeadded.

•Whendisplayinglargecontentfilesthatarenotfrequentlyupdated,savethefilesontheviewerPCinadvance,andonlyenterthepathsthatrefertothem.Thiswillhelpreducethetimeittakestosend program contents.

•SpecifytheabsolutepathoftheviewerPCortherelativepathfromMyContentsfolder(Fp.106). •Thefollowingparameterscanbeused:

%L:Xcoordinateoftopleftcornerofframe %T: Ycoordinateoftopleftcornerofframe %W : Width of frame %H : Height of frame

•Thissoftwareonlylaunchesorclosesspecifiedexecutablefilesataspecifiedtime.Itdoesnotguaranteetheactionsofanyexecutablefilesitlaunches.

•Dependingonthespecificationsofthefilethatisexecuted,itmaynotbeabletolaunchorclosecorrectly, or it may not be able to display windows in the correct position.

3. Select the content you want to use from the “Content File” list.Refertop.31foralistoffiletypesthatcanbeusedwiththebackground and frames 1-4.

•Clickwhileholdingdown[Ctrl]or[Shift]toselectmultiplecontentfilesatthesametime.

•Youcanpreviewcontentfilesinthe[ContentPreview]window.(Fp.38)

•IfusingHTMLcontent,makesurethatimages,moviesandotherfilesreferredtointheHTML

codearetransferredtothesamelocation,orasubdirectoryofthesamelocation,wheretheHTMLfileitselfisstored(attachedfiles).Thesecanbeaddedfromcontentfileproperties.(Fp.39)

MakesurethatallattachedfilesaredefinedbytheirrelativepathsintheHTMLfile.

4. Click .Contentfilesareaddedtotheendoftheplaylist.Formoredetailsabouttheplaylistrefertop.38.

•Instep3,youcanalsoregistercontentfilesbydouble-clicking them, or dragging them from the “ContentFile”listtothe“Playlist”.

•Thecontentfilesintheplaylistcanbecopiedbydragginganddroppingthemwhileholdingdownthe[Ctrl]key.

5. Repeat steps 1 to 4 as necessary. You can set the other frames in the same manner.

•Byclickingthe( )button“addblankcontent”atthebottomofthe“ContentFile”listonthe[Frame1]-[Frame4]tabs,youcanaddahiddensectiontotheplaylist.Likeothercontentfiles,theduration and order of play can be set for hidden sections. The frame set in the hidden section is not displayed.

•Clickingthebuttonsatthebottomofthe“ContentFile”list( ) or ( ) allows you to create a neworeditanexistingRSSconfigurationfile.

Creating programs

38

Program Editor

Content previewYoucanpreviewcontentfilesinthe[ContentPreview]window.Click[ContentPreview]fromthe[View]menutopreviewthefiles.Previewsforthefollowingtypesoffileswillnotbedisplayedimmediately.Topreviewthesefiles,clicktherelevanticondisplayedinthe[ContentPreview]window.(Clickthetextstringifpreviewing a scroll message.) •Fileswithasizeof2MBorhigher•Videofiles•PowerPointfiles(Previewdisplayedinfullscreenmode)•Scrollmessagefiles(Previewdisplayedinfullscreenmode)

PlaylistsPlaylistcontentisplayedinorderstartingwiththecontentfileatthetopofthelist.“Duration”displaysthelengthoftimetakentoplayaparticularcontentfile.“TotalDuration”displaysthelengthoftimetakentoplaytheentirecontentsoftheplaylist.Therearecaseswherethetotaldurationisdifferentfromtheactualduration(forexample,when“PlayNextContent”issetintheplaysetting,orwhenusingconditionalcontent).

Clickingthebuttonsonthetoprightofaplaylistperformsthefollowingactions:

Icon Menu option DescriptionShow the properties of the content

Displaysthepropertiesofthecurrentlyselectedcontentfile.Formoredetails,refertop.39.

Move the content to upwardsMovestheselectedcontentfileoneplaceforward(up)inthelist.(Cannotmovemultiplecontentfiles.)

Move the content to downwards

Movestheselectedcontentfileoneplacebackward(down)inthelist.(Cannotmovemultiplecontentfiles.)

Delete the contentDeletestheselectedcontentfilesfromthelist.Contentfilesmayalsobedeletedbypressing[Delete].

Creating programs

39

Program Editor

Background color when content is not displayedWhencontentisnotbeingplayed,framescanbefilledinusingaspecifiedcolor.Clickthecolorswatchtodisplaythe[Color]dialogboxandchange the background color.

Properties of contentFromtheplaylist,selectacontentfile,andclick todisplaythe[PropertiesofContent]dialogbox.Thefollowingsettingsmaybeadjusted:

1) Content File PathDisplaysthepathtothecontentfile.•Clicking[AttachedFiles]willallowyoutoaddafileorfilesfromthe[AttachedFiles]dialogboxwhichappears.

•Clicking[Change]willallowyoutochangethefileviathe[Open]dialogboxthatappears.

IfusingHTMLcontent,makesurethatimages,moviesandotherfilesreferredtointheHTMLcodearetransferred to the same location, or a subdirectory of the samelocation,wheretheHTMLfileitselfisstored.MakesurethatallattachedfilesreferencedintheHTMLfilearedefinedbytheirrelativepaths.

2) DurationThe duration of play can be set.•Whenthecontenttypeisvideo,audio,orscrollmessage,you

can set the operation to be performed when playback of the contentisfinishedbeforethespecifieddurationisreached.Tosetthis,click[PlaySetting].

•Whenthe“Scrolltotheendofthismessage”checkboxiscleared,playbackofscrollmessagesisforciblyterminatedafterthespecifieddurationisreachedevenifplaybackisnotfinishedyet(effectivewhenthecontent type is scroll message).

•Youhavethefollowingoptionsforwhattodowithcontentfilesafterplaytimehaspassedifthesamecontentfilesareplacedintheplaylistsuccessivelyoriftheplaylistconsistsofonecontentfile.

3) BackgroundIfthecontentisastillimagefileandyouhavecheckedthe“Keepingaspectratio”optionbutton,youcanspecify a background color for the content.Clickthecolorswatchtodisplaythe[Color]dialogboxandchangethebackgroundcolor.Clicktheboxnextto“Transparent”tomakethebackgroundtransparent.

The background color for the background frame cannot be set to transparent.

4) Volume ControlThe volume can be set.

Creating programs

40

Program Editor

5) Layout•“Keepingaspectratio”,“Notkeepingaspectratio”,and“Inoriginalsize”optionbuttons Youcanselect“Notkeepingaspectratio”whenthecontenttypeisastillimageorFlash. Youcanselect“Inoriginalsize”whenthecontenttypeisastillimage.•“Temporarily,moveframe”checkbox Tochangethescreenpositionofthecontenttemporarily,checkthischeckboxandclick[PositionSetting].Thepositionandsizeoftheframecanbespecifiedforeachcontent.Thescreenpositionmustbesetwithinthe background frame.

6) Picture TransitionWhen the content type is still image, the effect at screen switching can be set.Select the effect from each pull-down menu.Ifyoucheckthe“Viabackground”checkbox,theeffectofdisplayingthebackgroundcoloratthetimeofscreen switching is added.

7) Parameters (for EXE file)DisplaysparametersforEXEfiles.

●Setting the scroll messageSet scroll message content, order of play and duration of play.Ascrollmessagefilecontainingtexttobedisplayedinthescrollmessagemustbepreparedinadvance.Fordetailsabouthowtocreateascrollmessagefile,refertop.42.1. Click the [Message1] or [Message2] tab.

2. From the “Content Folder” tree, select the folder where the scroll message file you want to use is located.Confirmthatthe[Message]tabisselected.Ifthetabisnotselected, click on it.

•Youcanalsodisplaythecontentfilespecifiedwith“FilePathOnViewerPC”onthe[ViewerPath]tab.SpecifytheabsolutepathoftheviewerPCortherelativepathoftheMyContentsfolder(Fp.106).

3. Select the scroll message file you want to use from the “Content File” list.Onlyscrollmessagefiles(.tlp)andconditionalcontentforscrollmessagefiles(.dct)canbeusedwithMessage1andMessage2.

•Clickwhileholdingdown[Ctrl]or[Shift]toselectmultiplescrollmessagefilesatthesametime.

•Youcanpreviewscrollmessagefiles.Scrollmessagefilepreviewsareavailableinfullscreenmode only. (Fp.38)

Creating programs

41

Program Editor

Clickingthebuttonsatthebottomofthe“ContentFile”listperformsthefollowingactions:

Icon Menu option DescriptionCreateNewScrollMessage

LaunchesScrollMessageEditorandallowsyoutocreatenewscrollmessages.

EditScrollMessageLaunchesScrollMessageEditorandallowsyoutoeditthescrollmessageselectedinthe“ContentFile”list.

Delete Scroll Message Deletesthescrollmessagesselectedinthe“ContentFile”list.

add blank scroll message

Ahiddensectioncanbeaddedtotheplaylist.Likeothercontentfiles,the duration and order of play can be set for hidden sections.

FormoredetailsaboutScrollMessageEditor,refertop.42.4. Click .

Scrollmessagefilesareaddedtotheendoftheplaylist.Formoredetailsabouttheplaylist,refertop.38.

Instep3,youcanalsoregisterscrollmessagefilesby double-clicking them, or dragging them from the “ContentFile”listtothe“Playlist”.

5. Repeat steps 1 to 4 as necessary. You can set other scroll messages in the same manner.

Creating programs

42

Program Editor

Creating scroll message filesCreateamessagetobedisplayedinascrollmessage.1. Click the [Message1] or [Message2] tab, and then click under the “Content File” list.

ScrollMessageEditorwilllaunch.

1) Title barAfilenamewillbedisplayed.WhenScrollMessageEditorlaunches,thetitlebarwillread“Untitled”.Whenafileissaved,itwillchangetothenameofthefile.Whencontentofanopenedfileischanged,thetitlebarwilldisplayanasterisk(*)afterthefilename.

1) Title bar

2) Menus

3)Toolbar

4) Settings window

Creating programs

43

Program Editor


Menu option Description

File

CreateNewScrollMessage

Opensanewscrollmessagefile.

Open Scroll Message Loadsasavedscrollmessagefile.

Save Scroll Message Overwritesthecurrentlyeditedscrollmessagefile.Save Scroll Message As Savesthecurrentlyeditedscrollmessagefileunderadifferentname.Exit ExitsScrollMessageEditor.

Edit

Cut Cutsthetextstringselectedinthe“Scrollmessageeditbox”.Copy Copiesthetextstringselectedinthe“Scrollmessageeditbox”.

PastePastesatextstringthathasbeencutorcopiedintothe“Scrollmessageeditbox”.

Undo Undoesthelastactionperformedinthe“Scrollmessageeditbox”.

View Preview Scroll Message

Displaysapreviewofthecurrentlyeditedscrollmessagefile.Press[Esc]toclosethepreview.Ifawindowotherthanthewindowfor scroll messages is clicked during the preview, it cannot be terminatedevenifthe[Esc]keyispressed.Clickthepreviewonceandthenclickthe[Esc]key.

HelpAbout Scroll Message Editor

DisplaysversioninformationforScrollMessageEditor.

3) ToolbarThe toolbar buttons (icons) perform the following actions:

Icon Menu option Description

Open Scroll Message Loadsasavedscrollmessagefile.

Save Scroll Message Overwritesthecurrentlyeditedscrollmessagefile.

Preview Scroll Message

Displaysapreviewofthecurrentlyeditedscrollmessagefile.Press[Esc]toclosethepreview.Ifawindowotherthanthewindowforscroll messages is clicked during the preview, it cannot be terminated evenifthe[Esc]keyispressed.Clickthepreviewonceandthenclickthe[Esc]key.

About Scroll Message Editor

DisplaysversioninformationforScrollMessageEditor.

4) Settings windowFormoredetails,continuereadingfromstep2.

2. Enter a text string that you want to use in a scroll message into the “Scroll message edit box”.Thelongerthetextstringis,themorememorywillbeused.We recommend starting a new line at a suitable interval so that lines do not get too long.

Creating programs

44

Program Editor

Checkingthe[UseHTMLtag]checkboxallowsyoutousethefollowingHTMLtagsinthe“Scrollmessageeditbox”todefinethefontcolor,sizeandotherstyles.

Tag Explanation

Definesthetext.TakestheCOLOR,SIZEandFACEattributeswhichrespectivelydefinethetextcolor,textsizeandtypeface.

 Definesboldtext. Definesitalictext. Definesunderlinedtext.<S> Definesstrikethroughtext.<BIG> Definesbiggertext. Definessmallertext.

3. Set the “Message Format”.Setthedisplaydirectionoftext,fontandtextcolor.1)Nextto“Orientation”,selectthedisplaydirectionoftext.

2) Tochangethefont,click[SelectFont]andchooseafontfromthe[Font]dialogbox.

•YoumusthavethesamefontinstalledontheviewerPC. •Dependingonthetypeoffontused,textsizemaynotbeacquiredcorrectlyresultinginscrolling

being interrupted.

3)Setthe“TextColor.” Inthe[Color]dialogboxthatappearswhenclickingtherectangleinwhichacolorisdisplayed,thecolor

can be changed.

4)Select“Decoration”fromthe“None,”“Bordering,”or“Shadowing”optionbutton. If“Bordering”or“Shadowing”isselected,thetextcolorcanbechangedinthe[Color]dialogboxthat

appearswhenclickingtherectangleof“DecorationColor”.

4. Set “Background.”Set the background of scroll messages.1)Set“BackgroundColor.” Thecolorcanbechangedinthe[Color]dialogboxthat

appears when clicking the rectangle in which a color is displayed.

2)Checkingthe“UseTransparent”checkboxallowsyoutomakethebackgroundcolortransparent. Dragthe“Rate”slidertotheleftorrighttosetthetransparency(10stepsavailable).

•Donotcheckthecheckboxwhenyoudonotwanttomakethebackgroundcolortransparent.Evenifthesliderissettoopaqueattherightend,thebackgrounddoesnotbecomecompletelynon-transparent.

•Whenthecheckboxischecked,thecolorsetforthebackgrounditselfismadetransparent.Therefore,if“TextColor”and“DecorationColor”arethesameas“BackgroundColor,”“TextColor”and“DecorationColor”arealsomadetransparent.

•Iftransparent/semi-transparentscrollmessagesarelocatedonavideo,thedesiredeffectmaynotbe obtained.

Creating programs

45

Program Editor

5. Set “Scrolling.”Set the scroll direction and speed of scroll messages.1)Selectthe“Direction”from“Leftward,”“Rightward,”

“Upward”and“NoMove”optionbuttons.

•Ifthe“Vertical”optionbuttonisselectedin“MessageFormat,”the“Leftward”or“Rightward”option button cannot be selected.

•If“NoMove”isselected,scrollmessagesaredisplayedatthecenterofthespecifiedrangelinebyline. (The portion that is outside of this range is not displayed.)

2)Dragthe“Speed”slidertotheleftorrighttosetthescrollspeed(10stepsavailable).

•Evenifthescrollmessagespeedissetatthesamevalue,theactualscrollspeedmaydifferdependingontheperformanceofthePC.

•Whenthe“UseTransparent”checkboxischecked,thescrollspeedmaybelowercomparedwiththatofopaquescrollmessages.Itisrecommendedthattestsbeconductedbyactuallydisplayingscroll messages before operation.

Settingstobemadewhenthe“NoMove”optionbuttonisselected3)Set“DisplayTimeofEachLine.”(0to9999seconds) Scroll messages are displayed line by line. Set the display time.

4) Set whether to perform fade-in and fade-out. Todisplayscrollmessagessothatthecurrentlydisplayedscrollmessagefadesoutandthenextscroll

messagefadesinwhenswitchingbetweenscrollmessages,checkthe“UseFadingin/outWhenTelopSwitches.”checkbox.

If fade-in/fade-out scroll messages are located on a video, the desired effect may not be obtained.

6. Click [Save Scroll Message] from the [File] menu. Or click .

The[SaveAs]dialogboxwillappear.

7. Enter a new name in “File Name” and click [Save].Thecreationofthescrollmessagefileisnowcomplete.

Creating programs

46

Program Editor

●Setting audio and musicSet audio and music (background music) for program display.

Iftwoormorecontentfilescontainingaudioaresetindifferentframes,bothwillplay.

1. Click the [Sound] tab.

2. From the “Content Folder” tree, select the folder where the content files you want to use are located.Confirmthatthe[Sound]tabisselected.Ifthetabisnotselected, click on it.

Youcanalsoplaybackthecontentfilespecifiedwith“FilePathOnViewerPC”onthe[ViewerPath]tab.SpecifytheabsolutepathoftheviewerPCortherelativepathoftheMyContentsfolder(Fp.106).

3. Select the content you want to use from the “Content File” list.Foralistofcompatibleaudiofiletypes,refertop.31.

•Clickwhileholdingdown[Ctrl]or[Shift]toselectmultiplecontentfilesatthesametime.

•Audiocannotbepositionedinalayout.Ifyouselectamovieforthecontentfilethatwillbeusedas audio, a movie preview will be displayed in the [ContentPreview]window,butonlyaudiowillbeused when the program is actually displayed.

•Clickingthe“addnosoundportion”button( )atthebottomofthe“ContentFile”listwillallowyou to add a soundless portion to the playlist. Settings for duration and order of play can be set for soundlessportionsinthesamewayasforothercontentfiles.

4. Click .Contentfilesareaddedtotheendoftheplaylist.Formoredetailsabouttheplaylist,refertop.38.

Instep3,youcanalsoregistercontentfilesbydouble-clickingthem,ordraggingthemfromthe“ContentFile”listtothe“Playlist”.

Creating programs

47

Program Editor

●Setting the PIP windowSettheframesize,aspectratio,inputsource,andaudiosourceforthePIPframe.ThisfunctioncanbeusedonlywiththeSHARPLCDmonitor(PNseries).

1. Click the [PinP] tab.

2. Select the “Monitor Model Name”.

3. Set values for each item.Alistwillappearwhenyouclickonacellinthe“Value”column.*Itemsdisplayedvaryaccordingtothe“MonitorModelName”.

* The video signal may cause misalignment with PIP locationandsize.

1)Select“Size”. Monitorsizesvaryaccordingtoaspectratio.2)Select“AspectRatio”.

* Select this according to the video or images that you want to display.

3)Select“InputSource”.4)Select“SoundSource”.5)Select“Direction”.*ThesettingsfortheSHARPLCDmonitorcannotbechanged.Selectvaluesinaccordancewiththe

display settings.

●Saving a program

Save programUsethisoptionwhenyouwanttosavethecurrentlyeditedprogramunderitsoriginalname.1. From the [File] menu, click [Save Program].

You can also save by clicking .Aconfirmationmessageforcreatingathumbnailwillappear.

When“ProgramEditor”isstarted,thetitlebarwillread“Untitled”.Ifyouattempttosaveatthisstagethe[SaveProgram]dialogboxwillbedisplayed.Fortheremainingsteps,pleaserefertostep2of“Saveprogramas”.

2. When you want to create a thumbnail, click [Yes]. When you do not want to create a thumbnail, click [No].Whenyouclick[Yes],asmallprogrampreviewforcreatingathumbnailwill appear. Do not perform any operation before this preview screen disappears.Formoredetailsabouttheprogramthumbnail,refertop.48.

If you have already created a thumbnail, the program thumbnail is not deleted even if you click [No].Thepreviousthumbnailisdisplayed.

Creating programs

48

Program Editor

Save program asUsethisoptionwhenyouwanttosavethecurrentlyeditedprogramunderadifferentname.1. From the [File] menu, click [Save Program As].

The[SaveProgramAs]dialogboxwillappear.2. Select the program folder in which the program is to be

saved.Formoredetailsabouttheprogramfolder,seethefollowing.

3. Enter a new name in “Program Name” and click [Save].Aconfirmationmessageforcreatingathumbnailwillappear.

4. When you want to create a thumbnail, click [Yes]. When you do not want to create a thumbnail, click [No].Whenyouclick[Yes],asmallprogrampreviewforcreatingathumbnailwill appear. Do not perform any operation before this preview screen disappears.Formoredetailsabouttheprogramthumbnail,seethefollowing.

If you have already created a thumbnail, the program thumbnail is not deleted even if you click [No].Thepreviousthumbnailisdisplayed.

Program thumbnailsWhen a program thumbnail is created, it is displayed in the [OpenProgram],[SaveProgramAs],[DeleteProgram],[ImportProgram],and[ExportProgram]dialogboxesandthe[Program]tab of the timetable editor.

•Therearecasesinwhichavideoisnotdisplayed. •IfthePIPfunctionisused,thePIPportionisnot

displayed.

Program Folder•Programscanbesavedindifferentprogramfoldersaccording

to the type of program.•Theprogramsintheselectedprogramfolderaredisplayedin“ProgramListofSelectedProgramFolder.”

•In the menu that appears when right-clicking the program storage folder, the following operation can be performed.•Insert: Adds a new program folder under the selected folder. Enteranewnameinthe[ProgramFolderName]

dialogboxandclick[OK].•Delete: Deletestheselectedfolder.Iftheselectedfolder

contains a program, it cannot be deleted.•Rename:Changesthenameoftheselectedfolder.Enteranewnameinthe[ProgramFolderName]dialog

boxandclick[OK].

•The“Programs”folderinthefirstlevelcannotbedeletedorrenamed. •Iftheselectedfoldercontainsaprogram,itcannotbedeleted.

•Bydragginganddroppingthefolder,thelocationofthefoldercanbechanged.•Bydragginganddroppingaprogramin“ProgramListofSelectedProgramFolder”toanotherfolder,the

program can be moved.

Creating programs

49

Program Editor

●Opening a programLoadaprogramthatyouhavealreadysavedanduseit.Editingonlytheplacesyouwanttochangeinanexistingfileandsavingthefileunderanewnameisaneffective way to create programs.1. From the [File] menu, click [Open Program].

You can also open a program by clicking .The[OpenProgram]dialogboxwillappear.

2. Select the program folder containing the program.

3. From the “Program List”, select a program, and click [Open].TheprogramyouselectedwillbeloadedintoProgramEditorand you will be able to edit it.

Takecarewhensavingtheprogramyouhaveeditedusingthe[SaveProgram]option,asthechangesyouhavemadewillbereflectedintheoriginalfile.

●Checking a programCheckaprogramusingtheprogrampreviewfunction.Two previews with the same data will be displayed.1. If you want to preview a program at its original size, click

[Preview Program [Original size]] from the [View] menu. You can also preview a program by clicking .A preview of the currently edited program will be displayed at itsoriginalsize.

•Previewscanalsobedisplayedbypressing[F5]. •Enabling“SetConfigurationbeforePreview

Program”onthe[View]menuallowsyoutosetspecificdatesandtimes,specificpaneldisplaysand other program conditions and display previews.

If you want to preview a program at screen size, click [Preview Program [Fit screen]] from the [View] menu. You can also preview a program at screen size by clicking .Apreviewofthecurrentlyeditedprogramfittedtothesizeofthescreenwillbedisplayed.

2. Check the preview.PowerPoint and scroll messages will be displayed in the foreground, regardless of display priority order.Set PowerPoint data so that it plays repetitively by setting slide transition to advance slides automatically (automatic slideshow).Do not use the mouse or keyboard (e.g. to click on a window etc.) during program display. Doing so may change the window display order or alter the content to be played.

•Toclosethepreview,clickthepreviewwindowandpress[Esc]. •Iftheprogramscreensizeislargerthanthedisplayresolutionofthemonitor,thepreviewcannot

be displayed in full screen mode.

Creating programs

50

Program Editor

●Preview Program Display SettingsIfyoucheck“SetConfigurationbeforePreviewProgram”onthe[View]menu,the“Previewprogramsetting”screenwillbedisplayedduringtheprogrampreview.Youcansettheconditions,andifyouclickthe“Preview”button,thepreviewwilloccur under the conditions you have set.•Previewsometimelaterprogram: Displaystheprogrampreviewafteraspecifiedamountoftime

has passed. The time at which the program switches to the following content may differ from situations where programs are playedfromthebeginningsincethefirstcontentdisplayedmustbe played from the beginning when previewing programs with this function.

•Previewprogramwithplayconditions: Click“PlayConditionSetting”tosetconditions Duringconditionalcontentplayback,contentmatchingtheconditionssetin[PlayConditionSetting]is

displayed.•“Playdate” : Sets the date on which the program will be played.•“PlayTime” : Sets the time at which the program will be played.•“Panelname” : Sets the panel on which the program will be played.•“Group” : Sets the group with which the program will be played.•“Comment” : Sets comments on the panel on which the program will be played.

•Previewprogramwithbezelpositionformultimonitor: Displays the program preview over the edges between panels when using multiple monitors * Think of the edges as rough estimates.•“Modelname” : Select the monitor model name.•“Composition” : Select the multi-monitor setup.

●Deleting a programDelete unnecessary programs.1. Click [Delete Program] from the [File] menu.

The[DeleteProgram]dialogboxwillappear.2. Select the program folder containing the program.3. Select a program from the “Program List” and click

[Delete].

4. Click [Yes].The selected program has now been deleted.

5. Click [Close].

Creating programs

Click“Monitorsetting”tosetconditions

51

Program Editor

●Displaying program propertiesChangeprogramnamesandprogramcolors.1. Click [Properties of Program] from the [File] menu.

You can also display and change program properties by clicking .The[PropertiesofProgram]dialogboxwillappear.

Informationaboutthe“ProgramName”,“Duration”,“ColorofProgram”,“Option”,and“DataPath”isdisplayed.• The“ProgramName”canbechanged.• Clickthecolorswatchtodisplaythe[Color]dialogbox

and change the program color.• Ifyoucheckthe“Thelayouteditislocked.”checkbox,

layouteditingisdisabled.Checkthischeckboxwhenyou want to prevent the layout from being changed due toamistakeduringtheoperationofProgramEditor.

The“ColorofProgram”isthecolorusedtodisplaytheprogramintheTimetableEditor.

2. Click [OK].

“Duration”isanestimateoftheamountoftimeittakestoplayplaylistsincludingprogramsthroughintheirentirety.Actualdurationmaydifferfromthedisplayed“Duration”,when“PlayNextcontent”isselected for play settings or when conditional contents are included.

Creating programs

52

Program Editor

●Importing/exporting a program

Exporting a programTheexportfunctionisusedtowriteoutaprogramsothatitcanbeusedwiththisproductonanotherPC.

1. From the [File] menu, click [Export Program].The[ExportProgram]dialogboxwillappear.

2. Select the program folder containing the program.

3. From the “Program List”, select a program, and click [Export].The[Selectthefoldertoexport]dialogboxwillappear.

4. Specify the directory where you want to save the file, enter a “File name”, and click [Save].The[ExportProgram]dialogboxwillappear.

A screen like the one on the right will appear during theexport.Click[Cancel]tocanceltheexport.

5. Click [OK].Theprogramexportisnowcomplete.

Creating programs

53

Program EditorCreating programs

Importing a programTheimportfunctionisusedtoloadanexportedprogramthathasbeencreatedwiththisproductonanotherPC.1. From the [File] menu, click [Import Program].

The[Selecttheprogramtoimport]dialogboxwillappear.

2. Select a (.prg) file to import, and click [Open].The[ImportProgram]dialogboxwillappear.

A screen like the one on the right will appear while theimportisbeingprepared.Click[Cancel]tocancel the import.

3. Select the program folder in which the program is to be saved.

4. Enter a “Program Name”, and click [Import].

5. Click [Yes].The program will be saved with the name you entered.The program import is now complete.

54

Program EditorRSS Editor

RSS EditorSHARPDigitalSignageSoftwareProWEBServerVersionallowsyoutoreceiveRSSfeedsfromserversontheintranetandInternetanddisplaythemontheviewerPC.AcreatedRSSconfigurationfile(.ercfile)canbeusedascontentinProgramEditor.

● Creating a RSS configuration file1 From the Windows taskbar, click [Start], [All Programs], [SHARP Digital Signage Software], [Tools],

[RSS Editor].“RSSEditor”willlaunch.

● Main RSS Editor window 1) Title bar

2) Menus

3)Toolbar

4) Settings window

1) Title barDisplaysthefilename.WhenEditorlaunches,thetitlebarwillread“Untitled”.Whenafileissaved,itwillchangetothenameofthefile.Whencontentofanopenedfileischanged,thetitlebarwilldisplayanasterisk(*)afterthefilename.

2) MenusThefollowingarethecontentsofthe“File”,“View”and“Help”menus.Menuoptionsareasfollows:


File

New Opensanewfile.Open LoadsastoredRSSconfigurationfile.Save SavesthecurrentlyeditedRSSconfigurationfile.

Save AsSavesthecurrentlyeditedRSSconfigurationfileunderadifferentname.

Exit ExitsRSSEditor.

55



View

Basic EditstheRSSconfigurationfileusingatemplate.

AdvancedEditstheRSSconfigurationfilewithauserspecifieddesign.ACSS(stylesheet)isalsoavailable.

PreviewDisplaysapreviewofthecurrentlyeditedRSSconfigurationfile.Thepreviewisdisplayedatthesizeofthepreviewwindow.

Help AboutRSSEditor DisplaysversioninformationforRSSEditor.



New CreatesanewRSSconfigurationfile.

Open LoadsastoredRSSconfigurationfile.

Save SavesthecurrentlyeditedRSSconfigurationfile.

PreviewDisplaysapreviewofthecurrentlyeditedRSSconfigurationfile.Pressthe[Esc]keytoclosethepreview.

AboutRSSEditor DisplaysversioninformationforRSSEditor.

4) Settings WindowFormoredetails,continuereadingfromstep2.

2 Select a “Template”.Select a template for the RSS feed screen display design.

3 Set the “RSS Feed URL”.1) “URL” EntertheURLfortheservertoretrieveRSSfeeds.2) “Receptioninterval” SpecifytheintervaltoretrieveRSSfeedsinminutes.(Maximumof60minutes)

4 Specify the font.1)Feedtitle

SetthefontfortextdisplayedinthetitleareaofaRSSfeed.Click[Select]tospecifythefont.2) Feeddescription

SelectthefontfortextdisplayedinthebodyareaofanRSSfeed.Click[Select]tospecifythefont.

56


5 Specify the number of item to be displayed and configure the screen switching settings.1) “NumberofFeeditems” Selectthenumberofitemstobedisplayedonthewindowfromthelistbox.(Maximumof7items)2) “Screenswitchinginterval” Specify the interval to switch the items to be displayed on the window in seconds.3) “Theeffectofswitchingtime” Specify the slide show effect when the item is updated.4) “Thelengthoftheeffect” Specify the duration of the slide show effect in seconds.

6. Click [Save] from the [File] menu. Or click .The[SaveAs]dialogboxwillappear.Click[Save].TheRSSconfigurationfilewillbesavedinthefollowingfolder.• C:\ProgramData\SHARP\e-Signage\RSSConfig(WindowsVista/7)• C:\ProgramFiles\SHARP\e-Signage\RSSConfig(WindowsXP)

TheRSSconfigurationfilecreationisnowcompleted.

•InternetExplorerontheviewerPCisusedtodisplaytheRSSfeed. •ThedisplaymaydifferdependingontheversionofInternetExplorerinstalledontheviewerPC.

Clicking[Advanced]fromthe[View]menuallowsyoutospecifythescreendesignsettingsindetails.

57


1) “Title”,“Description”and“Background” Clickanyoftheitemstosettheindividualelements(font,position,backgroundandCSS).2)Elements “Font” Click[Select]andspecifythefonttype,styleandsize.Specifythefontcolorinthe[Color]dialog

displayed by clicking the palette. “Position” SelectthehorizontalandverticalpositionsoftheRSSfeedfromthelistbox.

“Background” Select a background image or color with a radio button.

“CSS” Describesthestylespecifiedinthecascadingstylesheet(CSS).

Theoperationofitemsotherthan“Displaysettings”isthesameasforbasicmodeoperation.

● Displaying a preview1. Click [Preview] in the [View] menu or click .

2. Enter the display position and size of the preview window.

3. Check the preview in the preview window.

4. Press the [ESC] key to close the preview window.

58

Conditional Content Editor

Conditional ContentWhen creating Playlists with the program editor, most of the content is the same, and in many cases, multiple Playlists with only one differing part are created. In these cases, you can display Playlists with only the differing partchangedaccordingtospecifiedconditionswhenusingconditionalcontent.

Basic Screens for Conditional Content Editor

●Launching Conditional Content Editor1. Click the [Start] button on the Windows Taskbar, and then click “All Programs” – “SHARP Digital

Signage Software” – “Tools” – “Conditional Content Editor” in order.Thiswilllaunch“ConditionalContentEditor.”*Youcanaddtooreditplaylistsbyselecting“ReplacetoConditionalContent”fromtheProgramEditor

playlist.

●Basic Screens for Conditional Content Editor

1) Title barDisplaysthefilename.WhenEditorlaunches,thetitlebarwillread“Untitled.”Whenafileissaved,itwillchangetothenameofthefile.Whencontentofanopenedfileischanged,thetitlebarwilldisplayanasterisk(*)afterthefilename.

1) Title bar

2) Menus

3)Toolbar

4) Tabs

5) Settings Window

59

Conditional Content EditorBasic Screens for Conditional Content Editor

2) MenusThefollowingarethecontentsofthe[File],[View],and[Help]menus.


File

CreateNewConditionalContent

Opensanewfile.

OpenConditionalContent Reads saved conditional content.

SaveConditionalContent Saves the currently edited conditional content.SaveConditionalContentAs

Saves the currently edited conditional content under a different name.

Exit QuitsConditionalContentEditor.

View

ShowContentPreviewwindow

Displays a preview of the currently edited conditional content in a windowthesizeofthepreviewwindow.

RefreshUpdatescontentfromthecontentfoldersintheeventthatcontentfileshavebeenaddedtoordeletedfromtheConditionalContentFoldersincethissoftwarewaslaunched.

HelpAboutConditionalContentEditor

DisplaysversioninformationforConditionalContentEditor.

3) ToolbarThe function of each button (icon) is as follows.


CreateNewConditionalContentforBackground/Frames

Createsnewconditionalcontentforbackground/frames.

CreateNewConditionalContentforMessages

Createsnewconditionalcontentforscrollmessages.

CreateNewConditionalContentforSound

Createsnewconditionalcontentforsound.

OpenConditionalContent

Reads saved conditional content.

SaveConditionalContent

Saves conditional content.

4) TabsWhenyouclickanyofthe[Content],[URL]or[ViewerPath]tabs,youwillgotothesettingwindowforthattab.

5) Settings WindowSet details for the tab that you selected.

60

Conditional Content EditorCreating Conditional Content

Creating Conditional Content

●Compatible Content File FormatsThefollowingfileformatscanbeusedascontent.

Types of Conditional Content Compatible File Extensions

Background,Frame.jpg,.jpeg,.gif,.png,.bmp,.avi,.mpeg,.mpg,.wmv,.asf,.mov,.swf,.ppt,.pps,.htm,.html,.exe

Scroll Messages .tlpAudio .wav,.mp3,.au,.aif,.aiff,.wma,.mid,.midi,.movRSSconfigurationfile .erc

●Configuring Conditional ContentsSetprojectnames,playbackstartdates,andViewerPCpanelattributesforconditionalcontent.

ContentFoldertree

ContentFileList

ConditionList

PlayCondition

61


1. From the “Content Folder” tree, Select the folder where the content files you want to use are located.Youcanalsodisplaycontentbyspecifying“URL”or“ViewerPath.”

The [URL] TabDisplaystheHTMLofaspecifiedURLascontent.EnteraURLthatcanbereferencedbytheviewerPC.IfyourPCcanconnecttotheInternet,clicking[ViewURL]willconnecttotheURLyouhaveentered.CheckthatyouhaveconnectedproperlyandthattheURLhasbeendisplayedcorrectly.

[Viewer Path] TabDisplaysthecontentfilespecifiedwith[FilePathOnViewerPC].YoucanspecifyanEXEfile.EnterapaththatcanbereferencedbytheviewerPC.ForanEXEfile,“Parameters”canbeadded.

•Whendisplayinglargecontentfilesthatarenotfrequentlyupdated,savethefilesontheviewerPCin advance and only enter the paths that refer to them. This will help reduce the time it takes to send program contents.

•SpecifytheabsolutepathoftheviewerPCortherelativepathfromMyContentsFolder(refertop.106). •Thefollowingparameterscanbeused. %L : Xcoordinateoftopleftcornerofframe %T : Ycoordinateoftopleftcornerofframe %W : Width of frame %H : Height of frame •Thissoftwareonlylaunchesorclosesspecifiedexecutablefilesataspecifiedtime.Itdoesnotguarantee

theactionsofanyexecutablefilesitlaunches. •Dependingonthespecificationsofthefilethatisexecuted,itmaynotbeabletolaunchorclose

correctly, or it may not be able to display windows in the correct position.

2. Select the content files you want to use from the Content File List.RefertoPage60forfileformatscompatiblewithbackgroundsand frames.

•Youcancheckcontentfilepreviewsinthe[ShowContentPreviewWindow]window.(refertop.62)

•IfusingHTMLcontent,makesurethatimages,moviesandotherfilesreferredtointheHTMLcodearetransferred to the same location, or a subdirectory of thesamelocation,wheretheHTMLfileitselfisstored(attachedfiles).

Thesecanbeaddedfromcontentfileproperties.(refertop.63)

MakesurethatallattachedfilesaredefinedbytheirrelativepathsintheHTMLfile.

62


3. Click the icon.Contentfilesareaddedtotheendoftheconditionlist.Formoredetailsabouthowtosetplayconditionsforconditionlists,refertoPage64.

•InStep3,youcanregistercontentfilesbydouble-clickingthemorbydraggingthemfromtheContentFilelisttothe[conditionlist].

•Youcanhidecontentbyclickingthe icon on the bottom left of the screen. •Youcanturnthesoundoffbyclickingthe icon on the bottom left of the screen. •Youcanskipconditionalcontentandplaythenextplaylistbyclickingthe on the bottom left of the screen. •Bysettingtheplaybackconditions,theselectedplaybackconditionswillappearintheframebelowthe

conditions list. •Thecontentfilesfromtheconditionslistcanbecopiedbydroppinganddraggingthemwhileholdingthe

[Ctrl]key. •Clickingthebuttonsatthebottomofthe“ContentFile”list( ) or ( ) allows you to create a new or

editanexistingRSSconfigurationfile.(Fp.56)

Preview ContentYoucanpreviewcontentfilesinthe[ShowContentPreviewWindow]window.Click[ShowContentPreviewWindow]fromthe[View]menutopreviewthefiles.Previewsfromthefollowingtypesoffileswillnotbedisplayedimmediately.Topreviewthesefiles,clicktherelevanticondisplayedinthe[ShowContentPreviewWindow]window.(Clickthetextstringifpreviewingascrollmessage.)•Fileswithasizeof2MBorhigher•Videofiles•PowerPointfiles(Previewdisplayedinfullscreenmode)•Scrollmessagefiles(Previewdisplayedinfullscreenmode)

Conditional ContentContentconditionsarecheckedandonlythefirstcontentthat matches those conditions is displayed. The list plays in order starting from the top, and contents that do not match conditions are skipped.The duration is the amount of time it takes to play content.ContentfilesontheconditionlistwiththelongestdurationsaredisplayedontheMaximumDurationList.

63


Clickingthebuttonsonthetoprightofaconditionlistperformsthefollowingactions:

Icon Menu option DescriptionShow the properties of the content

Displaysthepropertiesofthecurrentlyselectedcontentfile.See below for more details.

Set content playback conditions

Sets playback conditions for selected content.Formoredetails,refertoPage65.

Move content upwardMovestheselectedcontentfileoneplaceforward(up)onthelist.(Youcannotmovemultiplecontentfiles.)

Move content downwardMovestheselectedcontentfileoneplacebackward(down)onthelist.(Youcannotmovemultiplecontentfiles.)

Delete contentDeletestheselectedcontentfilesfromtheconditionslist.Youcandeletecontentfilesbypressingthe[Delete]key.

Properties of contentFromtheconditionlist,selectacontentfile,andclick todisplaythe[PropertiesofContent]dialogbox.Thefollowingsettingsmaybecheckedandadjusted:

1) Content File PathDisplaysthepathtothecontentfile.•Clicking[AttachedFiles]willallowyoutoaddafileorfilesfromthe[AttachedFiles]dialogboxthatappears.•Clicking[Change]willallowyoutochangethefileviathe[Open]dialogboxthatappears.

IfusingHTMLcontent,makesurethatimages,moviesandotherfilesreferredtointheHTMLcode are transferred to the same location, or a subdirectoryofthesamelocation,wheretheHTMLfileitselfisstored.MakesurethatallattachedfilesreferencedintheHTMLfilearedefinedbytheirrelative paths.

2) DurationThe duration of play can be set.•Whenthecontenttypeisvideo,audio,orscrollmessage,youcansettheoperationtobeperformedwhenplaybackofthecontentisfinishedbeforethespecifieddurationisreached.Tosetthis,click[playsetting].•Whenthe“Scrolltotheendofthismessage”checkboxiscleared,playbackofscrollmessageisforciblyterminatedafterthespecifieddurationisreachedevenifplaybackisnotfinishedyet(effectivewhenthecontent type is scroll message).

64


3) BackgroundIfthecontentisastillimagefileandyouhavecheckedthe“Keepingaspectratio”optionbutton,youcanspecify a background color for the content.Clickthecolorswatchtodisplaythe[Color]dialogboxandchangethebackgroundcolor.Clicktheboxnextto“Transparent”tomakethebackgroundtransparent.

The background color for the background frame will be displayed as black if the background color is set to transparent.

4) Volume ControlThe volume can be set.

5) Layout•“Keepingaspectratio”/“Notkeepingaspectratio”/and“Inoriginalsize”optionbuttons Youcanselect“Notkeepingaspectratio”whenthecontenttypeisastillimageorFlash. Youcanselect“Inoriginalsize”whenthecontenttypeisastillimage.•“Temporarily,moveframe”checkbox Tochangethescreenpositionofthecontenttemporarily,checkthisboxandclick[PositionSetting].Thepositionandsizeoftheframecanbespecifiedforeachcontent.

6) Picture TransitionWhen the content type is still image, the effect at screen switching can be set.Select the effect from each pull-down menu.Ifyoucheckthe“Viabackground”checkbox,theeffectofdisplayingthebackgroundcoloratthetimeofscreen switching is added.

7) ParametersDisplaysparametersforEXEfiles.

Play Condition SettingFromtheconditionslist,selectacontentfileandclick todisplaythe[PropertiesofContent]dialogbox.Selectfilesfromthelistandright-clickthem.Thedisplaywillremainvisibleevenwhen[SetPlayCondition]isselected.Thefollowingsettingsmaybecheckedandadjusted.If you have set multiple conditions, the playlist will play when it matches all conditions.1) Condition NameYoucansettheplaybackconditionname

2) TermYoucansetthebeginningandenddates.

3) TimeYoucansetthebeginningandendtimes.

4) DateYoucansettheplaybackdate.

5) DayYoucansetthedayoftheweekforplayback.Youcanselectmultipledaysoftheweek(e.g.Sunday-Monday).

65


6) WeekYoucansetplaybacktooccuronacertainweekofeverymonth.Youcanselectmultipleweeksoutofeverymonth(e.g.firstandthirdweeks).

7) Panel nameYoucansetplaybacktooccuronthepanelsthatcontainordonotcontainthecharactersthatyouenter.

8) GroupYoucansetplaybacktooccuringroupsthatcontainordonotcontainthecharactersthatyouenter.

9) CommentYoucansetplaybacktooccuronthepanelconfiguredwiththecommentthatincludesthecharactersyouentered, or to play back on the panels that do not include those characters.

•Whenconditionalcontentisplayed,PanelName,GroupandCommentsettingsfromwithinplaysettingsreferencepanelattributeinformationsetbytheViewerPCClientScheduler.

•YoucandistributeanddisplayidenticalconditionalcontentonmultipleviewerPCsbysettingpanelattributeinformationonviewerPCsbeforehand.

•ForinformationonhowtosetpanelattributeinformationonviewerPCs,refertoPage106.

Conditional Content and Total Duration

Still Image (5 seconds)


Video (20 seconds)

Conditional Content(20 seconds)



Video (20 seconds)

Monday’ s Content(10 seconds)



Video (20 seconds)

Tuesday’ s Content(15 seconds)



Video (20 seconds)

Wednesday’ s Content(20 seconds)



Video (20 seconds)

Unconditional Content(10 seconds)

Program Information(Total Duration: 50 seconds)

The Program Editor will reflect the maximum duration from within the total duration when you close the Conditional Content Editor.

Monday’ s Content

Tuesday’ s Content

Wednesday’ s Content

Unconditional Content

10 seconds

15 seconds

20 seconds

10 seconds

Monday’ s Program(Total Duration: 40 seconds)

Tuesday’ s Program(Total Duration: 45 seconds)

Wednesday’ s Program(Total Duration: 50 seconds)

Other Programs (Not M-T-W)(Total Duration: 40 seconds)

66

Timetable Editor

SetprogramscreatedwithProgramEditortodisplayatasethouroftheday.

The main Timetable Editor window

●Launching Timetable Editor1. Click on the Launcher window.

“TimetableEditor”willlaunch.

WhenTimetableEditorlaunches,anewblanktimetablewithnoprogramsassignedwillbedisplayed.Timetables are completed after program is set on this screen.

TimetableEditorcanalsobelaunchedbygoingtotheWindowsTaskbarandclicking[Start], [AllPrograms],[SHARPDigitalSignageSoftware],[Tools],andthen[TimetableEditor].

●The main Timetable Editor window1) Title bar

2) Menus

3)Toolbar

4) Tabs

5) Program/Panel Controllist

6)Timetable

1) Title barThe name of the timetable will be displayed here.WhenTimetableEditorlaunches,thetitlebarwillread“Untitled”.Whenatimetableissaved,itwillchangetothe name of the timetable. When content of an opened timetable is changed, the title bar will display an asterisk (*) after the timetable name.

Creating/Editing a Timetable

67

Timetable Editor



File

CreateNewTimetable Opens a new timetable. -Open Timetable Loadsasavedtimetable. Fp.72Save Timetable Overwrites the currently edited timetable. Fp.72

Save Timetable AsSaves the currently edited timetable under a different name.

Fp.72

Delete Timetable Allows the user to specify and delete saved timetables. Fp.73

Preview Timetable

Tests the currently edited timetable. Note that all the registered timetable data and schedule data is erased in the SHARP Digital Signage Software standalone version(PN-SS01).

Fp.73

Properties of Timetable Displays timetable properties. Fp.73

Import TimetableReadsatimetablethathasbeenexportedfromanotherPCsothatitcanbeused.

Fp.75

ExportTimetableWrites out a timetable so that it can be used on another PC.

Fp.74

Exit ExitsTimetableEditor. -

Edit

Select All Selects all programs in the timetable. -

DeleteDeletes the selected programs from the list.Programsmayalsobedeletedbypressing[Delete].

-

Copy Copiestheselectedprogram. -

Paste

Pastes the copied program into a timetable.If a program in the timetable is selected, the copied programwillbeallocatedimmediatelyafteritfinishes.Ifnoprogramsareselected,itwillbepastedat00:00.

-

Option Set Timetable SpanSetsthetimetabletoatargettimespan(startandfinishtimes). This is used for setting business hours as a time span, etc.

Fp.71

HelpAbout Panel Support Displays“Tableofsupportingpanelcontrols.” Fp.69AboutTimetableEditor DisplaysversioninformationforTimetableEditor. -



Open Timetable Loadsasavedtimetable. Fp.72

Save Timetable Overwrites the currently edited timetable. Fp.72

4) TabsClickingatabswitchestothesettingswindowforeachitem.

5) Program/Panel Control listWhenthe[Program]tabisselected,theprogramfolder,programthumbnails,andprogramlistaredisplayed.Formoredetailsabouttheprogramfolderandprogramthumbnails,refertop.48.Whenthe[PanelControl]tabisselected,thelistofpanelcontrolcommandsisdisplayed.

6) TimetableDisplays a timetable.

The main Timetable Editor window

68

Timetable Editor

Creating a timetable

●Registering a program in the timetable1. Check that the [Program] tab is selected.

Ifitisnot,clickthe[Program]tabtoselectit.The program list will be displayed here.Therearefourcategoriesinthelist:“ProgramName”,“Duration”,“ScreenSize”,and“ScreenPosition”.

Thecoloroftheiconinfrontofthe“ProgramName”representsthe“ColorofProgram”.Click[PropertiesofProgram]fromthe[File]menuin“ProgramEditor”tochangeit.(Fp.51)

Program folder Program thumbnails2. Select the program folder containing the program.

3. From the “Program Name”, select a program, and click , or alternatively, double-click the program.The[AddProgramtoTimetable]dialogboxwillappear.

4. Set the “Play back time”.This is the time of day when the program will be played.Specifytimesbetween00:00and24:00.

5. Click [OK].The program will be registered to the timetable.

Programs may also be registered by dragging themfromthe“ProgramName”tothe“Timetable”.Registered programs can be changed in the Timetable. (Fp.70,71)

6. Repeat steps 2 to 4 as necessary and set all the programs that you want to display over the course of the day.


69

Timetable Editor

●Registering panel control in a timetable1. Click the [Panel Control] tab.

A list of panel control commands will be displayed.

Therearetwocategories:“CommandName”and“InputSource”.Commandsareasfollows:

Command DescriptionTurn On Display Turns the panel (monitor) power ON.Turn Off Display Puts the panel (monitor) into standby mode.Switch Input Source (Input“No.”)

Switches the panel (monitor) input source.

TV *1

Switchtheinputsourceofthepanel(monitor)to“TVinput”.ThechannelatthetimeofswitchingtotheTVcannotbespecified.Thechannelthatwasselectedbythe TV immediately before switching is displayed.

*1 ItcannotbeusedwiththeSHARPLCDmonitor(PNseries)andtheLB-1085.

•Thecommandssupportedbythepanel(monitor)canbecheckedwith“Tableofsupportingpanelcontrols.”

•Todisplay“Tableofsupportingpanelcontrols,”click the button ( )“AboutPanelSupport”atthelower left of the panel control command list. Or, click [AboutPanelSupport]from[HelpMenu].

Thecontentsof“Tableofsupportingpanelcontrols”areasfollows:


RC-232CIndicates the cable to be used for the connection (straight cable or cross cable).Indicates transmission speeds supported.

LAN IndicateswhetherLANconnectionissupported.Turn On Indicateswhetherthe“TurnOnDisplay”panelcontrolcommandissupported.Turn Off Indicateswhetherthe“TurnOffDisplay”panelcontrolcommandissupported.GetStatus IndicateswhetherGetStatus(Fp.120)issupported.H/WErrorDetection Indicates whether hardware error detection is supported.TimeSynchronization IndicateswhetherTimeSynchronization(Fp.109,110)issupported.Input“No.” Indicates which input of the panel (monitor) is supported.TV Indicates whether TV input is supported.


70

Timetable Editor

2. Select the panel control command you want to use from the “Command Name” and click .

The[AddPanelControlCommandtoTimetable]dialogboxwill appear.

3. Set the “Time”.Thisisthetimethatthecommandwillbeexecuted.Specifytimesbetween00:00and24:00.

4. Click [OK].The panel control command will be registered in the timetable and the control command icons (Turn On Display: , Turn Off Display: , Switch Input Source: , TV: ) will be displayed to the right of the timetable.

Commandsmayalsoberegisteredbydraggingthemfromthe“CommandName”tothe“Timetable”.

5. Repeat steps 2 to 4 as necessary and set all the panel control commands that you want to execute over the course of the day.


71

Timetable Editor

●Adjusting a timetableClickingthebuttonsonthetoprightofthetimetableperformsthefollowingactions:


Preview Program Displaysapreviewoftheselectedprogramatitsoriginalsize.

Preview Program(FitScreen)

Displaysapreviewoftheselectedprogramfittedtothesizeofthescreen.

Properties for Program/Command

Displays the properties of the selected program/panel control command.

DeleteProgram/CommandDeletes the selected programs/panel control commands from the timetable. Programs/panelcontrolcommandmayalsobedeletedbypressing[Delete].

CopyPrograms/PanelControlCommands

Copiestheselectedprogram/panelcontrolcommand.

Paste Programs/PanelControlCommands

Positions the copied program/panel control command into a timetable. If a program in the timetable is selected, the copied program will be allocated immediatelyafteritfinishes.Ifnoprogramsareselected,itwillbepastedat00:00.

Clickaprogramorpanelcontrolcommandpositionedonthetimetable to select it.Dragaresizehandletoadjusttheplaybacktime/timefortheprogramorpanelcontrolcommandandconfirmthechangesvisually.The program and the panel control command can be moved by dragginganareaotherthantheresizehandleusingthemouse.

Changing the timetable span

1. From the [Option] menu, click [Set Timetable Span].The[TimetableSpan]dialogboxwillappear.

2. Set the “Start” and “End” times.Specifytimesbetween00:00and24:00.

3. Click [OK].Thenewtimeswillbereflectedinthetimetable.


72

Timetable Editor

Adjusting the scaleSelectintervalsof5,10,15,30or60minutesfromthe“Scale”list.

●Saving a timetable

Save timetableUsethisoptionwhenyouwanttosavethecurrentlyeditedtimetableunderitsoriginalname.

1. From the [File] menu, click [Save Timetable]. You can also save a timetable by clicking .Thetimetablefilewillbeoverwrittenandsavedwiththesamename.

When“TimetableEditor”isstarted,thetitlebarwillread“Untitled”.Ifyouattempttosaveatthisstagethe[SaveTimetable]dialogboxwillbedisplayed.Fortheremainingsteps,refertostep2of“Savetimetableas”.

Save timetable asUsethisoptionwhenyouwanttosavethecurrentlyeditedtimetableunderadifferentname.1. From the [File] menu, click [Save Timetable As].

The[SaveAs]dialogboxwillappear.2. Select the timetable folder in which the timetable is to be

saved.3. Enter a “Timetable Name” and click [Save].

The timetable will be saved with a different name.

●Opening a timetableLoadatimetablethatyouhavealreadysaved,anduseit.Editingonlytheplacesyouwanttochangeinanexistingfileandsavingthefileunderanewnameisanefficientway to create timetables.1. From the [File] menu, click [Open Timetable].

You can also open a timetable by clicking .The[OpenTimetable]dialogboxwillappear.

2. Select the timetable folder containing the timetable.3. From the “List of Timetable”, select a timetable, and

click [Open].The timetable you selected will be loaded into Timetable Editorandyouwillbeabletoeditit.

Takecarewhensavingatimetableyouhaveeditedusingthe[SaveTimetable]option,asthechangesyouhavemadewillbereflectedintheoriginalfile.


73

Timetable Editor

●Checking a timetableCheckatimetableusingtheprogrampreviewfunction.

All the registered schedule data and timetable data is erased in the SHARP Digital Signage Software standaloneversion(PN-SS01).

1. From the [File] menu, click [Preview Timetable].A preview of the timetable will be displayed.

2. Check the preview.

•Toclosethepreview,clickthepreviewwindowandpress[Esc]tostopthedisplay,andthendeletethescheduleinformationfromtheClientSchedulerofthetasktray.(Fp.105)

•IftheprogramscreensizeislargerthanthedisplayresolutionofthePCmonitor,thepreviewwillnot be able to display the entire program screen.

●Deleting a timetableDelete unnecessary timetables.1. From the [File] menu, click [Delete Timetable].

The[DeleteTimetable]dialogboxwillappear.

2. Select the timetable folder containing the timetable.

3. From the “List of Timetable”, select a timetable, and click [Delete].

4. Click [Yes].The selected timetable is now deleted.

5. Click [Close].

●Changing timetable name and timetable color1. From the [File] menu, click [Properties of Timetable].

The[PropertiesofTimetable]dialogboxwillappear.

Checkthe“Name”and“Color”.• The“Name”canbechanged.• Clickthecolorswatchtodisplaythe[Color]dialogbox

and change the timetable color.

The“Color”isthecolorusedtodisplaythetimetableinScheduleEditor.

2. Click [OK].


74

Timetable Editor

●Importing/exporting a timetable

Exporting a timetableTheexportfunctionisusedtowriteoutatimetablesothatitcanbeusedwiththisproductonanotherPC.Exportedtimetabledataincludesprogramsregisteredintimetables.

1. From the [File] menu, click [Export Timetable].The[ExportTimetable]dialogboxwillappear.

2. Select the timetable folder containing the timetable.

3. From the “List of Timetable”, select a timetable, and click [Export].The[Selectthefoldertoexport]dialogboxwillappear.

4. Specify the directory where you want to save the file, enter a “File name”, and click [Save].The[ExportTimetable]dialogboxwillappear.


5. Click [OK].Thetimetableexportisnowcomplete.


75

Timetable Editor

Importing a timetableTheimportfunctionisusedtoloadanexportedtimetablethathasbeencreatedwiththisproductonanotherPC.1. From the [File] menu, click [Import Timetable].

The[Selectthetimetabletoimport]dialogboxwillappear.

2. Select a (.tbl) file to import, and click [Open].The[ImportTimetable]dialogboxwillappear.


3. Select the timetable folder in which the timetable is to be saved.

4. Enter a “Timetable Name” and click [Import].

IfthesameprogramalreadyexistsonthePCwheretheimportistobeused,aconfirmationdialogboxwillappear.Choosewhethertooverwritetheexistingfileorimportthefileunderanewname.

5. Click [Yes].The timetable will be saved with the name you entered.The timetable import is now complete.


76

Schedule Editor

SettimetablescreatedwithTimetableEditortodisplayonasetday.

The main Schedule Editor window

●Launching Schedule Editor1. Click on the Launcher window.

“ScheduleEditor”willlaunch.

WhenScheduleEditorlaunches,anewblankschedulewithnotimetablesassignedwillbedisplayed.Schedules are completed after timetable is set on this screen.

ScheduleEditorcanalsobestartedbygoingtotheWindowsTaskbar,andclicking[Start],[AllPrograms],[SHARPDigitalSignageSoftware],[Tools],andthen[ScheduleEditor].

●The main Schedule Editor window

1) Title bar

2) Menus

3)Toolbar

4)“Timetable”list

5)Calendar

1) Title barThe name of the schedule will be displayed here.WhenScheduleEditorlaunches,thetitlebarwillread“Untitled”.Whenascheduleissaved,itwillchangetothename of the schedule. When content of an opened schedule is changed, the title bar will display an asterisk (*) after the schedule name.



FileCreateNewSchedule Opens a new schedule. -Open Schedule Loadsasavedschedule. Fp.80

Creating/Editing Schedules

77

Schedule EditorThe main Schedule Editor window


File

Save Schedule Overwrites the currently edited schedule Fp.80Save Schedule As Saves the currently edited schedule under a different name. Fp.80Delete Schedule Allows the user to specify and delete saved schedules. Fp.81

Properties of ScheduleAllows the user to display and change the schedule name. Fp.81

Import ScheduleReadsaschedulethathasbeenexportedfromanotherPCsothatitcanbeused. Fp.83

ExportScheduleWrites out a schedule so that it can be used on another PC. Fp.82

Exit ExitsScheduleEditor. -

Edit

Add Timetable to ScheduleAddsthetimetablethatisselectedinthe“Timetable”list to the schedule. Fp.78

Delete Timetable from Schedule

Deletesthetimetablethatisselectedinthe“Calendar”.Timetablemayalsobedeletedbypressing[Delete]. Fp.79

CopyTimetable Copiestheselectedtimetable. -Paste Timetable Pastes the copied timetable into a schedule. -Select All Selects all timetables in the schedule. -

Option SettingWhenyouuseProWebServer,checkthischeckbox.Bydefault,thischeckboxisnotchecked.

View

Show Previous MonthDisplays the month before the month that is currently displayed in the calendar. Fp.79

ShowNextMonthDisplays the month after the month that is currently displayed in the calendar. Fp.79

Show This Month Displays the current month in the calendar. Fp.79Refresh Updatesthe“Timetable”list. -

Help AboutScheduleEditor DisplaysversioninformationforScheduleEditor. -



Open Schedule Loadsasavedschedule. Fp.80

Save Schedule Overwrites the currently edited schedule. Fp.80

Delete TimetableDeletesthetimetablethatisselectedinthe“Calendar”.Timetablemayalsobedeletedbypressing[Delete]. Fp.79

CopyTimetable Copiestheselectedtimetable. -

Paste Timetable Pastes the copied timetable into a schedule. -

4) “Timetable” listThetimetablefolderandthelistoftimetablescreatedwithTimetableEditoraredisplayed.Inthelistoftimetable,therearetwocategories:“Name”and“LastModifiedTime”.

Thecoloroftheiconinfrontofthenameofeachtimetablerepresentsthe“timetablecolor”.Click[PropertiesofTimetable]fromthe[File]menuin“TimetableEditor”tochangeit.(Fp.79)

5) CalendarTimetables are positioned on the calendar to create schedules.

78

Schedule EditorCreating a schedule

Creating a schedule

●Registering a timetable in the scheduleTimetable folder1. Select the timetable folder containing the timetable.

2. Select a timetable from the “Timetable” list and click ,

or alternatively, double-click the timetable, or from the [Edit] menu, click [Add Timetable to Schedule].The[AddTimetabletoSchedule]dialogboxwillappear.

3. Set a “Span”.This is the length of time that the program will be played for.Specifydatesbetween1/1/2005and12/31/2020.Ifyoudonotsetthe“Option”area,thetimeschedulewillbeaddedtotheentirespanfrom“Start”to“End”.

Usethe“Option”settingstoaddtimetablestospecifieddaysor weeks.

• Ifyoucheckthe“Selecttheday(s)oftheweekbelow:”checkboxandthe“Sunday”to“Saturday”checkboxes,thetimetablewillonlybeaddedtothespecifieddaysofthe week during the span.

• Ifyoucheckthe“Selecttheweek(s)ofthemonthbelow:”checkboxandthe“1stweek”to“6thweek”checkboxes,thetimetablewillonlybeaddedtothespecifiedweeksduringthespan.

• Ifyouspecifyboth“Selecttheday(s)oftheweekbelow:”and“Selecttheweek(s)ofthemonthbelow:”,thetimetablewill only be added to days that meet both sets of conditions.

Forexample,setting“Selecttheday(s)oftheweekbelow:”to“Wednesday”,and“Selecttheweek(s)ofthemonthbelow:”to“2ndweek”,wouldaddthetimetabletothesecondWednesdayofeverymonth.

4. Click [OK].The timetable will be registered in the schedule.

Timetables may also be registered by dragging themfromthe“Timetable”listtothe“Calendar”. Registered timetables can be changed in the calendar.

5. Repeat steps 2 to 3 as necessary and add all the timetables that you want to display to the schedule.

79

Schedule Editor

The calendarThecalendarcandisplaydatesbetweenJanuary2005andDecember2020.Daysonwhichatimetableisregisteredshowthe“timetablecolor”andthe“timetablename”.

The buttons and lists at the top of the calendar perform the following actions:


Show Previous Month Displays the month before the month that is currently displayed.

SelectYear Displays the year selected for the month that is currently displayed.

Select Month Displays the month selected for the year that is currently displayed.

ShowNextMonth Displays the month after the month that is currently displayed.

Show This Month Displays the current month.

•Clickwhileholdingdown[Ctrl]or[Shift]toselectmultipledaysatthesametime. •Selectatimetableandpress[Delete]todeleteitfromthecalendar.

Timetables are registered to different days depending on where they are dragged on the calendar.Days that already have timetables registered to them will not be overwritten.

1) Dates

2) Weekday titles

3)Weektitles

4) All

1) Dates : Timetables will be added to the day to which they are dragged.2) Weekday titles: Timetables will be added to the day of the week to which they are dragged for the currently

displayed month.3)Weektitles: Timetableswillbeaddedtotheweektowhichtheyaredraggedforthecurrentlydisplayed

month.4) All : Timetables will be added to every day of the currently displayed month.

Creating a schedule

80


●Saving a schedule

Save scheduleUsethisoptionwhenyouwanttosavethecurrentlyeditedscheduleunderitsoriginalname.1. From the [File] menu, click [Save Schedule].

You can also save a schedule by clicking .Theschedulefilewillbeoverwrittenandsavedwiththesamename.

When“ScheduleEditor”isstarted,thetitlebarwillread“Untitled”.Ifyouattempttosaveatthisstagethe[SaveSchedule]dialogboxwillbedisplayed.Fortheremainingsteps,refertostep2of“Savescheduleas”.

Save schedule asUsethisoptionwhenyouwanttosavethecurrentlyeditedscheduleunderadifferentname.1. From the [File] menu, click [Save Schedule As].

The[SaveScheduleAs]dialogboxwillappear.2. Select the schedule folder in which the schedule is to be

saved.3. Enter a “Schedule Name”, and click [Save].

The schedule will be saved with a different name.

●Opening a scheduleLoadaschedulethatyouhavealreadysaved,anduseit.Editingonlytheplacesyouwanttochangeinanexistingfileandsavingthefileunderanewnameisanefficientway to create schedules.1. From the [File] menu, click [Open Schedule].

You can also open a schedule by clicking .The[OpenSchedule]dialogboxwillappear.

2. Select the schedule folder containing the schedule.3. From the “List of Schedule”, select a schedule, and click

[Open].The schedule you selected will be loaded into Schedule Editorandyouwillbeabletoeditit.

Takecarewhensavingascheduleyouhaveeditedusingthe[SaveSchedule]option,asthechangesyouhavemadewillbereflectedintheoriginalfile.

81

Schedule Editor

●Deleting a scheduleDelete unnecessary schedules.1. From the [File] menu, click [Delete Schedule].

The[DeleteSchedule]dialogboxwillappear.

2. Select the schedule folder containing the schedule.

3. From the “List of Schedule”, select a schedule, and click [Delete].

4. Click [Yes].The selected schedule will be deleted.

5. Click [Close].

●Changing schedule name1. From the [File] menu, click [Properties of Schedule].

The[PropertiesofSchedule]dialogboxwillappear.

Checktheschedulenameandchangeitifyouwish.

2. Click [OK].

Creating a schedule

82


●Importing/exporting a schedule

Exporting a scheduleTheexportfunctionisusedtowriteoutaschedulesothatitcanbeusedwiththisproductonanotherPC.Exportedscheduledataincludesprogramsandtimetablesthatareregisteredtotheschedule.

1. From the [File] menu, click [Export Schedule].The[ExportSchedule]dialogboxwillappear.

2. Select the schedule folder containing the schedule.

3. From the “List of Schedule”, select a schedule, and click [Export].The[Selectthefoldertoexport]dialogboxwillappear.

4. Specify the directory where you want to save the file, enter a “File name” and click [Save].The[ExportSchedule]dialogboxwillappear.


5. Click [OK].Thescheduleexportisnowcomplete.

83

Schedule Editor

Importing a scheduleTheimportfunctionisusedtoloadanexportedschedulethathasbeencreatedwiththisproductonanotherPC.1. From the [File] menu, click [Import Schedule].

The[Selectthescheduletoimport]dialogboxwillappear.

2. Select a (.sch) file to import, and click [Open].The[ImportSchedule]dialogboxwillappear.


3. Select the schedule folder in which the schedule is to be saved.

4. Enter a “Schedule Name”, and click [Import].

If the same program name or timetable name alreadyexistsonthePCwheretheimportistobeused,aconfirmationdialogboxwillappear.Choosewhethertooverwritetheexistingfilesorimportthem under a new name.

5. Click [Yes].The schedule will be saved with the name you entered.The schedule import is now complete.

Creating a schedule

84

Panel Management and Option

Panel Management and OptionWhendistributingprogramstomultiplepanelswiththeNetworkVersion,youmustfirstsetthepanels.

Managing panels


●Launching Panel Control Management1. Click on the Launcher window.

The[PanelManagement]dialogboxwillappear.

●The main Panel Management window

1) The “List of registered panel” treeDisplays a list of all registered panels.Panel icons ( )canbedraggedanddroppedinsidethislisttochangetheirattribution(“(AllPanels)”oran“arbitrarygroup”).

Thenumberofpanelsthatcanbemanageddependsonthelicense.(Maximumlimitis100panels)

1)The“Listofregisteredpanel”tree

2) Buttons

85


2) ButtonsThe buttons perform the following actions:

Name Description Relevant pageAdd Panel Adds a new panel to be managed. FBelowAddGroup Adds a new group. Fp.86Edit Changesthecontentoftheselectedpanelorgroup. FBelow,p.86Delete Deletes the selected panel or group. Fp.87ManualControl Sets panels and control commands to be controlled manually. Fp.87Exit Closesthe[PanelManagement]window. -

●Adding/editing a panel1. Click [Add Panel] to add a new panel to manage.

The[AddPanel(PanelPC)]dialogboxwillappear.

Click [Edit] to edit an existing panel. The[EditPanel(PanelPC)]dialogboxwillappear.

Thesettingsforthe[AddPanel(PanelPC)]and[EditPanel(PanelPC)]dialogboxesarethesame. Panels can also be edited after they have been added.

2. Set the options.1)Panelname(Compulsory) Chooseanamethatwillmakeiteasytoidentifythe

panel.(Namesmustbewithin50characters)

2)Group IntheGroupbox,selectagrouptoaddthepanelto. If you do not want to assign the panel to any particular

group,select“(none)”.Panelsthatarenotassignedtoanyparticulargroupwillbeaddedunder“AllPanels”.

Clicking[AddPanel]whilethe“Listofregisteredpanel”treegrouporapanelassignedtoagroupisselected will add the panel to the respective group.

3)HostnameorIPaddress(Compulsory) SetsthehostnameorIPaddressofviewerPCwhichcanbeaccessedfromtheserver.

It is not possible to create two or more panels with the same host name or IP address.

Managing panels

86

Panel Management and OptionManaging panels

4)MACaddress SettheMACaddressfortheviewerPCifyouwanttoturnitonfromthemanagementPC.

5)FTPSetting Enterthe“Username”(within30alphanumericcharacters),“Password”(within30alphanumeric

characters),and“Portnumber”(1-32000)thatyousetfortheviewerPCFTPsettings.

•FTPsettingsforaddingapanelcanbesetinadvance.(Fp.89) •IfyouhaveinstalledtheViewerVersion,auniqueFTPServerwillbeinstalled,andstartedasa

service.ThedefaultTCP/IPportnumbersare20and21.Ifthisportnumberisalreadyusedbyanotherservice,changetheportnumber.TheFTPsettingsoftheviewerPCClientSchedulermust use the same port number. (Fp.107)

6)PowerControl IfyouwanttoturnthepoweroftheviewerPConoroffataspecifiedtime,selectthe“Specifytopower

on/offthepanelthroughtheserveratthedesignatedtime”,andsetthe“Timetostart”and“Timetoend”.(Timescanbespecifiedinincrementsof5minutes)

3. Click [Add] or [Cancel].

●Adding/editing a group1. To add a group, click [Add Group].

The[AddGroup]dialogboxwillappear.

To edit a group, select the group you want to edit and click [Edit]. The[EditGroup]dialogboxwillappear.

•Agroupcanbecreatedwithinagroup

2. Select the parent group.

3. Enter a “Group name”.(Namesmustbewithin50characters)

4. Click [Add] or [Cancel].

87


●Controlling a panel manuallySetthisoptionwhenyouwanttocontroltheviewerPCmanually.

WhencontrollingtheviewerPCmanually,(whenturningonthepanelPC),theWakeOnLANfunctionthatoperatesbyMagicPacketssentfromtheviewerPCmustbeenabled.

IftheviewerPCisoutsidethesameLANsegment,MagicPacketsmaynotgetthroughdependingonrouterspecsandsettings.Contactyournetworkadministratorformoredetails.

1. Click [Manual Control].The[ManualControlforthePanel(PanelPC)]dialogboxwillappear.

2. Check the check boxes next to the panels or groups that you want to control.Selecta“ControlCommand”.The following three control commands can be sent:•PCPowerON•PCReboot•PCPowerOFF

3. Click [Execute].The control command will be sent.

●Deleting a panel or group1. Select the panel or group that you want to delete.

If you select a group, all the panels assigned to that group will be deleted.

2. Click [Delete].Aconfirmationdialogboxwillappear.

3. Click [OK].

Managing panels

88

Panel Management and OptionOption

OptionOption allows you to check product version information and to set values for adding panels in advance.

●Launching Option1. Click on the Launcher window.

The[Option]dialogboxwillappear.

●Checking version informationThe[Version]tabdisplaysversioninformation.

Registering a license codeIf you input a temporary license code when installing, you will only be able to use the software for a two-month trial period. Register your license code before the end of the trial period.

1. Click [Register].The[RegisterLicenseCode]dialogboxwillappear.

2. Enter your “license code” and click [Register].

IfusingWindowsVista/7,click[Allow](forWindowsVista)or[Yes](forWindows7)ifaUserAccountControlwindowappears.

89


●Adding default panel settings for panelsSetdefaultvaluesforFTPsettingsthatareappliedtoallnewly-addedpanels.1. Click the [FTP Setting] tab.2. Set the [Default to Add the Panel].

•Username(within30alphanumericcharacters)•Password(within30alphanumericcharacters)•Portnumber(1-32000)

The initial default values are:•Username:ftp•Password:ftp•Portnumber:21

•IfyouhaveinstalledtheViewerVersion,auniqueFTPServerwillbeinstalled,andstartedasaservice.ThedefaultTCP/IPportnumbersare20and21.Ifthisportnumberisalreadyusedbyanotherservice,changetheportnumber.TheFTPsettingsoftheviewerPCClientSchedulermustusethesameportnumber. (Fp.107)

•Theportnumbershouldalsobechangediftherearesecurityissues.

Option

90

Schedule Distribution Tool

DistributeschedulescreatedwithScheduleEditortotheviewerPC.

The main Schedule Distribution Tool window

●Launching Schedule Distribution Tool1. Click on the Launcher window.

“ScheduleDistributionTool”willlaunch.

ScheduleDistributionToolcanalsobestartedbygoingtotheWindowsTaskbarandclicking[Start],[AllPrograms],[SHARPDigitalSignageSoftware],[Tools],andthen[ScheduleDistributionTool].

●The main Schedule Distribution Tool window

1) Distribution settings button

2) Tabs

3)DistributionReservation/Logwindow

1) Distribution settings buttonLaunchesawizardforsystemanddistributionmethodsettings.

2) TabsClickingatabswitchestothelistwindowforeachitem.

3) Distribution Reservation/Log windowDisplays details for the selected tab.

Distributing schedules

91


Distributing schedulesSchedules can be distributed in the following ways: •DistributedtoaviewerPCviaanetwork(NetworkVersiononly)•DistributedtoyourownPC•DistributedviaUSBmemoryorotherexternaldevice

Themaximumtotalsizeofschedules(includingprogramsandcontent)thatcanbedistributedwithScheduleDistributionToolis2GB.Datagreaterthanthissizecannotbedistributed.

●Distributing via a networkDistributeschedulestotheviewerPCviaanetwork.

These instructions only apply to the Network Version.

1. Click [Distribute schedule or program to the panel].The[SelectionofDistributionMethods]dialogboxwillappear.

2. Select the “Distribute the schedule through the network” option button, and click [Next]. The[SelectiontheScheduletoDistribute]dialogboxwillappear.

3. Select a schedule.If you would like to add the selected schedule to the current scheduleontheviewerPC,checkthe“Addthisscheduleontherunningscheduleinthetargetpanel”checkbox.Iftheboxisnotchecked,thecurrentscheduleontheviewerPCwillbereplaced with the currently selected schedule.

Schedule replacement is performed in units of days. It cannot be changed to units of hours.

4. Click [Next].The[SelectionoftheDistributionTarget]dialogboxwillappear.


92

Schedule Distribution ToolDistributing schedules

5. Check the check boxes for all the panels and/or groups that the schedule is to be sent to. Clickingthebuttonsinthetoprightofthewindowwillallowyou to add or edit panels and groups in the same way as the [PanelManagement]window(Fp.84).

The buttons perform the following actions:

Button Name Description Relevant page

AddPanel(PanelPC) Adds a new panel to be managed. Fp.85

AddGroup Adds a new group. Fp.86

EditPanel/GroupChangesthecontentoftheselectedpanelorgroup. Fp.85-86

DeletePanel/Group Deletes the selected panel or group. Fp.87

6. Click [Next].The[SelectionoftheDistributionDateTimeandOption]dialogboxwillappear.

7. Select a “Distribution Date Time”.• “Distributenow”optionbutton Distributesscheduleassoonasthedistributionwizardexits.

• “Distributeatspecifieddatetime”optionbutton Distributes schedule at the set date and time.

8. Set “Distribution Options”.• “PowerONthepanelPCbeforethedistribution”checkbox DistributesthescheduleafterturningtheviewerPConifitisnot

already turned on at the time of distribution.• “PowerOFFthepanelPCafterthedistribution”checkbox TurnstheviewerPCpoweroffaftertheschedulehasbeendistributed.

9. Click [Next].A[Confirmation]dialogboxwillappear.

10. Check the distribution settings, and click [Finish].Thedistributionordistributionreservationwillbeexecuted.

Distribution data can be packaged and saved as asinglefilethatincludesscheduleinformationincluding programs, timetables, and content.

Click[SavethePackage],andinthe[SavethePackage]dialogboxthatappears,specifyadirectorytosavethefileto.Thenentera“Filename”,andclick[Save].Thereisusuallynoneedtouse this function.

93


11. If you selected the “Distribute now” option button in step 7, a screen like the one on the right will appear. Check that the distribution was successful and click [Close].

If you selected the “Distribute at specified date time” option button in step 7, a screen like the one on the right will appear. Click [OK].

•Scheduleandprogramdistributionmaytakesometime.Ifyouperformsimultaneousdistributiontomultiplepanels,dataisactuallysentsequentially.Forthisreason,theremaybesometimedifferenceinschedule and program distribution.

•Oldschedulesarenolongerrequiredafternewscheduleshavebeensent.UnnecessaryschedulesandtheirassociatedcontentwillbeautomaticallydeletedthenexttimeClientSchedulerstarts.

●Distributing to your own PC

These instructions only apply to the Standalone Version.


2. Select the “Distribute the schedule to your PC (My computer)” option button, and click [Next]. The[SelectiontheScheduletoDistribute]dialogboxwillappear.

3. Select a schedule.If you want to add the selected schedule to the current open scheduleonyourPC,checkthe“Addthisscheduleontherunningscheduleinthetargetpanel”checkbox.Iftheboxisnotchecked,thecurrentlyopenscheduleonyourPCwillbereplaced with the currently selected schedule.



94

Schedule Distribution ToolDistributing schedules

5. Check the distribution settings, and click [Finish].Thedistributionwillbeexecuted.

Distribution data can be packaged and saved as asinglefilethatincludesscheduleinformationincluding programs, timetables, and content.


6. A screen like the one on the right will appear. Check that the distribution was successful and click [Close].

●Distributing with USB memory or other external storage device

•DonotremovetheUSBmemoryorotherexternalstoragedevicefromyourPCuntilthetransferiscomplete.

•CertainUSBdevicesandotherexternalstoragedevicesmaynotbeabletodistributecorrectly. •SettheviewerPCto“Normalmode.”Ifitissetto“Contentsdirectdistributemode,”schedulescannotbe

distributed (Fp.111).


2. Select the “Distribute the schedule using external storage such as USB memory” option button, and click [Next].The[SelectiontheScheduletoDistribute]dialogboxwillappear.

95


3. Select a schedule.If you would like to add the selected schedule to the currently openscheduleontheviewerPC,checkthe“Addthisscheduleontherunningscheduleinthetargetpanel.”checkbox.Iftheboxisnotchecked,thecurrentlyopenscheduleontheviewerPCwillbereplacedwiththecurrentlyselectedschedule.

4. Click [Next].The[SelectionoftheDrivetoTransfer]dialogboxwillappear.

5. Select the drive to which you want to transfer the schedule to.


7. Check the distribution settings, and click [Finish].Thedistributionwillbeexecuted.

Distribution data can be packaged and saved as a single filethatincludesscheduleinformationincludingprograms,timetables, and content.

Click[SavethePackage],andinthe[SavethePackage]dialogboxthatappears,specifyadirectorytosavethefileto.Thenentera“Filename”,andclick[Save].Thereisusually no need to use this function.

8. Click [Yes].Aconfirmationdialogboxwillappearagain.

9. Click [OK].

10. Remove the USB memory or other storage device from the PC.

Ifyouclicked[No]instep8,removethedeviceviatheSafelyRemoveHardwareicon( ) in the Task Tray.

11. Connect the USB memory or other external storage device to the viewer PC.Theschedulewillbeautomaticallydistributed.TheUSBmemoryorotherexternalstoragedevicewillautomaticallystopwhenthedistributioniscomplete.Checkthemessage,andremovethedevice.


96

Schedule Distribution ToolDisplaying break-in programs

Displaying break-in programs

●Distributing via a network and making a break-in display

•ThisfunctionisonlyavailablewiththeNetworkVersion. •Ifordinaryscheduledistributionandbreak-indistributionoverlap,thebreak-indistributionhasthehigher

priority in processing.


2. Select the “Distribute the program through network and make a break-in display” radio button, and click [Next].The[SelectionoftheBreak-inProgram]dialogboxwillappear.

3. Select a program, and click [Next].The[SelectionoftheDistributionTarget]dialogboxwillappear.

4. Check the check boxes for all the panels and/or groups that the schedule is to be sent to. Clickingthebuttonsinthetoprightofthewindowwillallowyoutoaddoreditpanelsandgroupsinthesamewayasthe[PanelManagement]window(Fp.84).Foradescriptionofbuttonactions,refer to p.92.

5. Click [Next].The[DisplayTimeandPeriodsofBreak-inProgram]willappear.

97


6. Set the “Display Time of Break-in Program” area.• “Displaythebreak-inprogramassoonasdistributionhasbeencompleted”optionbutton

Displaystheprogramassoonasthedistributionwizardexits.• “Startthebreak-inprogramatthetimespecified”optionbutton Starts program display at the set time.

7. Set a “Display Time”

8. If you want to perform panel control operations before and after a break-in program, check the “Conduct panel control before and after the program display” check box, and click [Next]. The[SpecificationofPanelControlCommand]dialogboxwillappear.

If you do not want to perform panel control operations before and after a break-in program, clear the “Conduct panel control before and after the program display” check box, and click [Next].A[Confirmation]dialogboxwillappear.Proceedtostep11.

9. Set the [Panel Control Command].“BeforeDisplaytheBreak-inProgram”• “PowerONthepanelbeforedisplaytheprogram”checkbox

Turns the panel on before displaying the break-in program.

• “Switchthepanelinputbeforedisplaytheprogramasbelow”checkbox

Switchestothespecifiedinputbeforedisplayingthebreak-in program.

“AfterDisplaytheBreak-inProgram”• “PowerOFFthepanelafterdisplaytheprogram”checkbox Turnsthepaneloffafterthebreak-inprogramhasfinished.• “Switchthepanelinputafterdisplaytheprogramasbelow”checkbox Switchestothespecifiedinputafterdisplayingthebreak-inprogram.


11. Check the distribution settings, and click [Finish].The break-in program display or display reservation will be executed.

By packaging distribution data, program information containing break-in programs and other contents canbesavedasasinglefile.



98



•Ifthesettimehasalreadypassedthebreak-inprogramwill not be displayed.

•Oncethebreak-inprogramhasbeendisplayedinthetargetpanelfortheamountoftimespecifiedin“DisplayTime”,thepanelwillreturntotheoriginalprogram.Display will resume from the start of the program that would otherwise have been playing when the break-in program ends.

•Whetherabreak-inprogramhasendedischeckedeveryminute(atsecond00).Thepointatwhichthedisplayofthebreak-inprogramendsandtheoriginalprogramstartsisthefirstsecond00aftertheendof the break-in program.

•Onlyonebreak-inprogramcanberegistered.Programsdistributedlaterwillbegivenpriority.

●Distributing to your own PC and making a break-in display

This function is only available with the Standalone Version.


2. Select the “Distribute the break-in program to your PC (My computer)” option button, and click [Next].The[SelectionoftheBreak-inProgram]dialogboxwillappear.

3. Select a program, and click [Next].The[DisplayTimeandPeriodsofBreak-inProgram]willappear.

99


4. Set the “Display Time of Break-in Program” area.• “Displaythebreak-inprogramassoonasdistributionhasbeencompleted”optionbutton

Displaystheprogramassoonasthedistributionwizardexits.

• “Startthebreak-inprogramatthetimespecified”optionbutton

Starts program display at the set time.

5. Set a “Display Time”

6. If you want to perform panel control operations before and after a break-in program, check the “Conduct panel control before and after the program display” check box, and click [Next].The[SpecificationofPanelControlCommand]dialogboxwillappear.

If you do not want to perform panel control operations before and after a break-in program, clear the “Conduct panel control before and after the program display” check box, and click [Next].A[Confirmation]dialogboxwillappear.Proceedtostep9.

7. Set the [Panel Control Command].“BeforeDisplaytheBreak-inProgram”• “PowerONthepanelbeforedisplaytheprogram”checkbox Turns the panel on before displaying the break-in program. • “Switchthepanelinputbeforedisplaytheprogramasbelow”checkbox

Switchestothespecifiedinputbeforedisplayingthebreak-in program.

“AfterDisplaytheBreak-inProgram”• “PowerOFFthepanelafterdisplaytheprogram”checkbox Turnsthepaneloffafterthebreak-inprogramhasfinished.• “Switchthepanelinputafterdisplaytheprogramasbelow”checkbox Switchestothespecifiedinputafterdisplayingthebreak-inprogram.


9. Check the distribution settings, and click [Finish].The break-in program display or display reservation will be executed.

By packaging distribution data, program information containing break-in programs and other contents canbesavedasasinglefile.



100



•Ifthesettimehasalreadypassedthebreak-inprogramwillnotbedisplayed. •Oncethebreak-inprogramhasbeendisplayedinthetargetpanelfortheamountoftimespecifiedin

“DisplayTime”,thepanelwillreturntotheoriginalprogram.Displaywillresumefromthestartoftheprogram that would otherwise have been playing when the break-in program ends.

•Whetherabreak-inprogramhasendedischeckedeveryminute(atsecond00).Thepointatwhichthedisplayofthebreak-inprogramendsandtheoriginalprogramstartsisthefirstsecond00aftertheendofthebreak-inprogram.

101


List of Reserved Distribution/List of Distribution Log

●List of Reserved DistributionClickthe[ReservedDistribution]tabtodisplaythelistofcurrentlyreserveddistributions.Therearefivecategories:ScheduleName,DistributionTarget,ReservedDateTime,PowerON,andPowerOFF.Clickingonacategorywillorganizethereservationsinascendingordescendingorder.

Deleting reserved distributionsReserved distributions can be deleted by any of the following three methods:•Selectareservationandclickthebuttonatthetoprightofthelist( ).•Right-clickonareservation,andfromthemenuthatappears,click[DeletetheReservedDistribution].•Selectareservationandpress[Delete].

UpdatingReserved distributions can be updated by either of the two following methods:•Right-clickintheReservedDistributionList,andfromthemenuthatappears,click[RefreshtheInformation].•Press[F5].

●List of Distribution LogClickthe[DistributionLog]tabtodisplayadistributionlogofschedulesandbreak-inprograms.Thereareeightcategories:ScheduleName,DistributionTarget,CompleteDateTime,Type,Result,StartDateTime,DataSize,andDetailInformation.Clickingonacategorywillorganizethereservationsinascendingordescending order.

List of Reserved Distribution/List of Distribution Log

102

Schedule Distribution ToolList of Reserved Distribution/List of Distribution Log

Deleting the entire distribution logThe entire contents of the distribution log can be deleted by either of the following two methods: •Right-clickintheDistributionLog,andfromthemenuthatappears,click[DeleteAllDistributionLog].•Press[Delete].Aconfirmationdialogboxwillappear.Click[OK].

UpdatingThe distribution log can be updated by either of the two following methods:•Right-clickintheDistributionLog,andfromthemenuthatappears,click[RefreshtheInformation].•Press[F5].

Outputting CSV File of Distribution LogThedistributionlogcanbeoutputasaCSVfile.1. Right-click in the Distribution Log, and from the menu that appears, click [Output CSV File of

Distribution Log].The[SelecttheCSVfileyouwanttowritedown]dialogboxwillappear.

2. Enter a “File Name”, and click [Save].

103

Server Scheduler

Schedule Management This function is only available with the Network Version.

Server SchedulerServerSchedulercontrolsreserveddistributionschedulesthathavebeenreservedwith“ScheduleDistributionTool”,anddistributesschedulestotheviewerPCatthescheduledtime.

Server Scheduler is automatically started when Windows launches.When Server Scheduler launches, an icon ( ) is displayed (and resides permanently) in the Task Tray.DonotexitServerSchedulerunnecessarily.

104

FTP Server/Client Scheduler

Schedule Reception/Program Display This function is available on the Viewer Versions.

ThissectiongivesdetailsforviewerPCsettingswhenschedulesandprogramsaredistributedfromthemanagementPCusingtheNetworkVersion.

FTP ServerTheFTPServerreceivesschedulesandbreak-inprogramsfromthemanagementPC,andpassesthemtotheClientScheduler.

●Launching the FTP ServerTheFTPServerlaunchesautomaticallywhenWindowsislaunched.TocheckiftheFTPServerserviceisstartedornot,usethefollowingmethod:• If using Windows XP1. From the Windows Taskbar click [Start], [Control Panel], [Performance and Maintenance],

[Administrative Tools], [Services].The[Services]windowwillappear.

2. Check that the status of “SHARP LCD Monitor FTP Server” under “Services” is “Started”. Iftheserviceisnotstartedclick“StarttheService”.

• If using Windows Vista1. Right-click on an empty area of the Taskbar, and from the menu that appears, click [Taskbar].

The[WindowsTaskManager]dialogwillappear.2. Click the [Processes] tab and confirm that “FTPD.exe” is displayed.

• If using Windows 71. Right-click on an empty area of the Taskbar, and from the menu that appears, click [Start Task

Manager].The[WindowsTaskManager]dialogwillappear.

2. Click the [Processes] tab and confirm that “FTPD.exe” is displayed.

105


Client SchedulerClientSchedulerisusedontheviewerPC.Itloadstheschedulesandbreak-inprogramsthathavebeenreceivedbytheFTPServer,andcontrolstheProgramViewertodisplayspecifiedprogramsatthespecifiedtime.

●Launching Client SchedulerClientSchedulerisautomaticallylaunchedby“Startup”whenWindowslaunches.WhenClientSchedulerlaunches,anicon( ) is displayed (and resides permanently) in the Task Tray.

●Client Scheduler menuThe menu that appears when the icon in the Task Tray is right-clicked performs the following actions:

SettingClickingthe[Setting]menudisplaysthe[SettingofClientScheduler]dialogbox.Thetabsinthisdialogboxcontain the following settings:

[Program Viewer] tabContainsdetailedsettingsfortheProgramViewer.• Youcanviewprogramsevenwhentherearenoprogramsbeingdisplayedbycheckingthe“Painttheprogramviewarea,ifnoprogramisplayed.”checkbox.Setthedisplaycontentbyclicking[PaintSetting].· [Darkblue]optionbutton Displaystheareadefinedby“Displayarea”settingsin

dark blue.· “Contentfile”optionbutton Setsthecontentfilepath,displaymethod,andbackgroundcolorfromthe[Settingofthecontentsfile]dialogboxthatappearswhen[Setting]isclicked.

1)Click[Ref],andselectacontentfile.Youmayselectanyfileformatthatissupportedbythisproduct.

2)Selecta“Displaymode”fromthe“Keepingaspectratio”,“Notkeepingaspectratio”,or“Inoriginalsize”option buttons.

3)Setthe“Backgroundcolor”.

· “Program”optionbutton Click[Import],andselectanexistingprogram.YoumayselectprogramsthathavebeenexportedwithProgramEditor.

Client Scheduler

106


• Theareasetunderthe[DisplayArea]tabwillbethedisplayarea(exceptwhenaprogramisspecified).• “Smoothcontentschange”checkbox Checkthischeckboxtoswitchbetweencontentssmoothlybypreparingtheplaybackofthenextcontentbeforetheendofthecurrentcontent.Alsocheckthischeckboxwhenitisnecessarytosynchronizethecontentdisplaybetweenframes.

Clicking[PreloadSetting]allowsyoutosetthecontentthatistobereadinadvance.

•MakingtheswitchingofcontentssmoothwillincreasetheloadontheCPUandthememoryuseamount.Itisrecommendedthattestsbeconductedbyactuallydisplayingprogramsbeforeoperation.

•WhenperformingadvancedreadingofacontentthatcanbeplayedwithWindowsMediaPlayer,thevideoacceleratorisdisabled.CheckthatyourPChasenoughperformancetodisplaycontentswithoutthevideoaccelerator(WindowsXPOnly).

•IfacontentthatcanbeplayedwithInternetExplorerisreadinadvance,Flashcontentsandbannersembeddedinthecontentmaybestartedfromthemiddle.

• “Setlimitofprintscreenarea”checkbox WhenyouareoutputtingmultiplescreensonaviewerPC,theScreenCapturefunctioncapturestheentiredesktop.Checkthisboxtocapturejustapartofthescreenoutput.

Click[AreaSetting]anddefinetheareayouwanttocapture.

• “Don’tmovefocuswhileprogramviewerstarts”checkbox Thisboxisusuallyleftunchecked. CheckthisboxifyoudonotwanttheProgramViewerfocustomovewhenyoulaunchtheProgramViewer.

• “Hidetaskbarwhileshowing”checkbox Whenthischeckboxischecked,thetaskbarishiddenwhenProgramViewerislaunchedanditisre‑displayedwhenProgramViewerisclosed.

• “Play*.movfileswithWindowsMediaPlayer(Windows7only)”checkbox ThisboxcanonlybecheckedwhenusingWindows7.Checkthisboxtoplay.movfilesonWindowsMediaPlayer.

• “MyContentsfolder”:Enterthepathofthefolderinwhichcontentstobedistributedinadvancearetobesaved.

Theinitialdefaultvaluesare:•MyContentsfolder:C:\ProgramFiles\SHARP\SHARPDigitalSignageSoftware\MyContents\ (ForWindowsVista/7,C:\ProgramData\SHARP\SHARPDigitalSignageSoftware\MyContents\)

•InDigitalSignageSoftwarePro(PN‑SS05),contentcanbedistributedinadvancetotheMyContentfolder.

Client Scheduler

107


• [SetPanelAttribute] YoucansetViewerPCpanelattributesand“Panelname,”“Group”and“Comment.” Thissettingisforplayingdifferentcontentineachpanelduringconditionalcontentplayback.

[Display Area] tab• “Displayareafordistributedprogram” Whenthedisplayareaoftheprogramandtheresolutionofthepanelaredifferent,thistaballowsyoutodisplaytheprogramregardlessofthedisplayareasetfortheprogram.

Checkthe“Alwaysdisplaythedistributedprograminthefollowingarea”checkboxandsettheareainwhichtheprogramistobedisplayed.

• “Displayareaforemergencyscrollmessage” Setthedisplayareaforemergencyscrollmessages.

Emergencyscrollmessagescanbedistributedfrome‑SignagePro(PN‑SS05). Emergencyscrollmessagescannotbedistributedfrome‑Signage(PN‑SS01/SS02).

[Power Control] tabManagespoweronviewerPCscurrentlybeingconfigured.• “Shutdownonthedesignatedtime”checkbox CheckthisboxtoturnofftheviewerPCatthespecifiedtime.• “Rebootonthedesignatedtime”checkbox CheckthisboxtorestarttheviewerPCatthespecifiedtime.

[Network] tabSetthemethodusedtoacquiredatafromthenetwork.• “PUSHtypedistribution”radiobutton ThedatadistributedatthetimingofwhenthemanualtransmissionprocedureiscompletedonthemanagementPCisrecievedusingFTPprotocols.

• “UseViewerIDinsteadofhostnameorIPaddress”checkbox

TheIPaddressissenttothemanagementPCbytheviewerPCusingHTTPprotocols.CheckthisboxiftheIPaddressoftheviewerPCisnotafixedIPaddress.Click[LaunchHTTPSevernow]onthe[HTTPServer]tabintheSHARPDigitalSignageSoftwareProWEBServerVersionConfigurationToolwindowtolaunchtheTinyWEBServer.

•“PULLtypedistribution”radiobutton EachviewerPCretrievesdistributiondatafromthemanagementPCatregularintervalsusingtheHTTPprotocol.

•TheviewerPCcanonlyusePULLtypedistributionor“UseViewerIDinsteadofhostnameorIPaddress”ofPUSHtypedistributionifDigitalSignageProisinstalledonthemanagementPC.

•Inordertouse“UseViewerIDinsteadofhostnameorIPaddress”of“PUSHtypedistribution”,theSimpleWebServerofDigitalSignagePromustberunning.

•Inordertouse“PULLtypedistribution”,theSimpleWebServerofDigitalSignagePromustberunning.ThiscanonlybesetintheViewerVersion.

The[Network]tabcanonlybeconfiguredintheDigitalSignageSoftwareViewerVersion(PN‑SV01).

Client Scheduler

108


•[FTPServer]tab SetstheFTPServer.• Username”:Mustbekeptwithin30alphanumericcharacters.• “Password”:Mustbekeptwithin30alphanumericcharacters.• “PortNumber”:Enteravaluebetween1and32000.

The initial default values are:• Username:ftp•Password: ftp•Port Number: 21

•IfyouhaveinstalledtheViewerVersion,auniqueFTPServerwillbeinstalled,andstartedasaservice.ThedefaultTCP/IPportnumbersare20and21.Ifthisportnumberisalreadyusedbyanotherservice,changetheportnumber.TheFTPsettingsofthepanelsregisteredwith“PanelManagement”onthecontrolPCmustusethesameportnumber.(Fp.86)

• [HTTPCommunicationSetting]• “ProVersion”radiobutton Sets the HTTP server to “ProVersion”. * This is not used during normal operations.• “ProWEBServerVersion”radiobutton Sets the HTTP server to “Pro WEBServerVersion”.• HostnameorIPaddressofserver(managementPC): SetthehostnameorIPaddressofthemanagementPC.• “PortNumber”:Enteravaluebetween1and65535. Set the port number to be used by the HTTP protocols. If themanagementPCornetworkresidesinsideafirewall,configurethesettingstoenablethisportnumbertobeused for communications.

• “Username”:Mustbekeptwithin30alphanumericcharacters.

• “Password”:Mustbekeptwithin30alphanumericcharacters.

Entertheusername,passwordandportnumberthataresetonthe“SimpleWebServer”tabofthe“ProManagerOptions”dialogboxofthemanagementPC.

Refertopage84ofthesettingscreenofthemanagementPC(ProManager). Configuretheproxyserversettingsinthe[ConnectionSetting]windowforInternetExplorerifproxy

serversettingsareneeded.TheconnectionisestablishedbasedontheInternetExplorersettings.

Client Scheduler

109


• TenantID SetsanoperationgroupIDfortheviewerPC. TheoperationgroupIDisonlyvalidwhenselectingthe“ProWEBServerVersion”radiobutton.• ViewerID:SetsanoperationViewerIDfortheviewerPC.• Accessinterval:Setthelengthofthetimeintervalforcheckingfordistributeddata.• [Detail] Set the length of the interval for periodic access.• Firstaccesstime:Settheinitialtimeforaccessingthe

HTTP Server.• RetryCount:Setthenumberofretriestoattempt

reconnection when a communications error occurs.•Retry Interval: Set the length of the time interval for

attempting reconnection when a communications error occurs.

• “Checknewscheduledata,oncethenetworkconnectionisestablishedalso”checkbox

CheckthisboxtoreceivedatanotonlywhendataistransmittedfromthemanagementPCduringaccesstothemanagementPCatregularintervalsbutalsotoreceive data in the conditions listed below. •WhenlaunchingtheClientScheduler•When changing the network settings•Whenanetworkenvironmentchangehasbeendetected(WhentheIPaddressischanged,anLANis connected, etc.)

• [Register/UpdatethisPCtoManagementPC] ClickthebuttontosendtheviewerPCinformationtothemanagementPC.YoucaneasilyregistertheviewerPCinformationtothemanagementPC.

Tousetheabovefunctions,thefollowingconditionsarerequired: •DigitalSignagePromustbeinstalledonthemanagementPC. •SimpleWebServermustberunningonthemanagementPC. *WhenaviewerIDisnotsetinPUSHtypedistribution,theabovesettingsarenotneeded.

[Panel Control] tabSelectthepanelcontrolmethod(RS-232C/LAN).• “Nopanel”optionbutton Panels will not be controlled.• “Singlepanel”optionbutton Click[ConnectionSetting]andselectthepanelcontrolmethod(RS-232C/LAN).

• [ConnectionSetting] Selecteither“RS-232C”or“LAN”fromthe[Connectinginterface]optionbuttons.

Setting Description Default

RS-232CCOMport COM1~COM256 COM1Baud Rate 9600,19200,38400 9600

Client Scheduler

110



LAN

Host name or IP address

EnterthehostnameortheIPaddressofthepaneltobecontrolledwithin32alphanumericcharacters.

-

Data portEnteradataportnumberbetween1025and65535forthepanels to be controlled.

10008

UsernameEntertheusername,ifoneexistsforthepanelstobecontrolled,in8charactersorless.

-

PasswordEnterthepassword,ifoneexistsforthepanelstobecontrolled,in8charactersorless.

-

• [Testconnection] Checktheconnectiontoconfirmthatthepanelcanbecontrolled.Aftertheconnectionisestablishedsuccessfully,themodelnameofthepanelisacquiredanddisplayed.Performoperationwiththepowerofthepanelturnedon.TocontrolthepanelwiththeLB-1085,besuretochecktheconnectiononce.Thepanelcannotbecontrolledunlessa“Testconnection”isperformed.

• “MultiplePanels”optionbutton Youcanselectandcontrolpanelsfromupto25panels.• [ConnectionSetting] A list of connected panels appears when you click [ConnectionSetting].

Addpanelstothelistthefirsttimeyouusethisfunctionbyclicking[Add].


RS-232CCOMport COM1~COM256 COM1Baud Rate 9600,19200,38400 9600

LAN

Host name or IP address

EnterthehostnameortheIPaddressofthepaneltobecontrolledwithin32alphanumericcharacters.

-

Data portEnteradataportnumberbetween1025and65535forthepanels to be controlled.

10008

UsernameEntertheusername,ifoneexistsforthepanelstobecontrolled,in8charactersorless.

-

PasswordEnterthepassword,ifoneexistsforthepanelstobecontrolled,in8charactersorless.

-

Panel IDsSelectIDsinordertoidentifypanelswhenPCsareconnectedin a daisy chain.(No daisy chain), 1-255

(No daisy chain)

• “PowerONthepanelbeforestartingupthissoftware.”checkbox Whenthischeckboxischecked,thepowerofthepanelisturnedonwhentheClientScheduleris

started.

Client Scheduler

111

FTP Server/Client SchedulerClient Scheduler

• “PowerOFFthepanelbeforeexitingthissoftware.”checkbox Whenthischeckboxischecked,thepowerofthepanelisturnedoffwhentheClientScheduleris

terminated.• “SynchronizethepaneltimewithPCtimebeforestartingupthissoftware.”checkbox Whenthischeckboxischecked,theclockofthepanelissettothetimeoftheviewerPCwhentheClientSchedulerislaunched.

[USB Distribute] tabSetsthedetailsofUSBdistribution.

• “Showtimeofthedialogtocanceldistribution” If you set a time longer than one second, the distribution canceldialogboxisdisplayedwhenUSBmemoryoranotherexternalstoragedeviceisinserted.

Ifyouclick[Cancel]inthedistributioncanceldialogbox,distributioniscanceled.RemoveUSBmemoryoranotherexternalstoragedeviceusingthesaferemovalicon ( ) in the Task Tray. Ifyouclick[DistributionNow]inthedistributioncanceldialogbox,distributionisresumed.

• “Normalmode”optionbutton SelectthisbuttontoperformUSBdistributionwith“ScheduleDistributionTool”(Fp.94).

• “Contentsdirectdistributemode”optionbutton SelectthisbuttontoperformUSBdistributionwith“Contentsdirectdistributemode”(Fp.112).• “USBmemory’sfoldertodistribute” Ifyouperformdistributionwith“Contentsdirectdistributemode,”enterthepathofthefolderoftheUSB

memory containing the content.

The[USBDistribute]tabisonlyavailableontheSHARPDigitalSignageViewerVersion(PN-SV01).

Displaying the logClickthe[ViewtheLog]menutodisplayalogofClientScheduleroperations.The log can be cleared and updated.

Pausing a programClickingthe[PausetoViewProgram]menuwillpausethecurrentlydisplayedprogram.Whentheprogramispausedacheckmarkwillbedisplayedtotheleftofthemenu.Clicking[PausetoViewProgram]againwillrestart program display.

Deleting Schedule InformationClickthe[DeleteScheduleInformation]menu.Aconfirmationmessagewillappear.Click[Yes]todeleteallregisteredscheduleinformationcurrentlysavedinClientScheduler.

112


Deleting Break-in Program InformationClickthe[DeleteBreak-inProgramInformation]menu.Aconfirmationmessagewillappear.Click[Yes]todeleteallregisteredbreak-inprograminformationcurrentlysavedinClientScheduler.

Deleting Emergency Scroll Message InformationClick[DeleteEmergencyScrollMessageInformation]menu.Aconfirmationmessagewillappear.Click[Yes]todeleteallregisteredemergencyscrollmessageinformationcurrentlysavedinClientScheduler.

•Emergencyscrollmessagescanbedistributedfrome-SignagePro(PN-SS05). Emergencyscrollmessagescannotbedistributedfrome-Signage(PN-SS01/SS02).

Get data from management PCClick[GetdatafrommanagementPC]toreceivedistributiondatafromthemanagementPC.ThisfunctioncanonlybeusedwithPULLtypedistribution.

Version informationClickthe[Version]menu.TheClientScheduler[Version]dialogboxwillappear.

Youmaybeaskedtoprovideversioninformationinthe event that you need to contact SHARP regarding a problem with SHARP Digital Signage Software.

If you input a temporary license code when installing, you will only be able to use the software for a two-month trial period. Register your license code before the end of the trial period.ForinstructionsonhowtoregisterLicenseCodesrefertop.88.

Exiting Client SchedulerToexitClientScheduler,clickthe[ExitClientScheduler]menu.DonotexitClientSchedulerunnecessarily.

Distributing content directly by using USB memory or another external storage deviceThecontentcanbedisplayedsimplybyinsertingUSBmemoryoranotherexternalstoragedevicecontainingcopiedcontentintotheviewerPC.

•DonotremovetheUSBmemoryoranotherexternalstoragedevicefromthePCbeforetransferiscompleted.

•DependingontheexternalstoragedevicesuchasUSBmemory,distributioncannotbeperformedsuccessfully.

1. Set the viewer PC to “Contents direct distribute mode.”1)Clicktheicon( )intheTaskTrayintheviewerPCandclickthe[Setting]menu.2)Clickthe[USBDistribute]tabandselectthe“Contentsdirectdistributemode”optionbutton(Fp.111).3)Set“USBmemory’sfoldertodistribute”asrequired.4)Click[OK].

2. Copy the content to be distributed to USB memory or another external storage device.CopythecontenttothefoldersetinStep1-(3).The contents placed in folders lower than the set folder are not displayed.

Client Scheduler / Distributing content directly by using USB memory or another external storage device

113


•IntheContentsdirectdistributemode,HTMLfilescannotbedisplayed. •Contentsareexecutedinascendingorderofthefilenames. Byattachingaserialnumbersuchas“001,”“002,”…,attheheadofeachfilename,theorderofplay

can be set. •Theplaytimeofcontentisusually10seconds.Forvideo,itisthetimeuntilplayiscompleted.

Byappending“_[numericalvalue]m”(minutes)or“_[numericalvalue]s”(seconds)tothefilenameofthecontent,theplaytimeofthecontentcanbeset(24hoursmaximum). [Example]Ifimage_30s.jpgisspecified,thecontentisdisplayedfor30seconds.

•ByplacingTelop.txt(textfile)inthespecifiedfolder,itscontentscanbedisplayedasscrollmessages.

3. Remove the external storage device such as USB memory from the PC. Remove it from the safe removal icon ( ) in the Task Tray.

4. Insert the external storage device such as USB memory into the viewer PC.Thecontentwillbedistributedautomatically.Afterdistributioniscomplete,theexternalstoragedevicesuchasUSBmemorystopsautomatically.Checkthemessageandremoveit.

Program ViewerProgramViewerisusedontheviewerPC.Itdisplaysprogramsbasedonschedulesandbreak-inprogramsloadedbyClientScheduler.

•Topauseaprogram,right-clicktheClientSchedulericon,andfromthemenuthatappears,click[PausetoViewProgram].

•TochangeadvancedsettingsforProgramViewer,right-clicktheClientSchedulericonandfromthemenuthatappears,click[Setting].Settingscanbeadjustedfromthe[SettingofClientScheduler]dialogboxthatappears.(Fp.105)

Distributing content directly by using USB memory or another external storage device

114

Key/Mouse Monitoring Tool

Key/Mouse Monitoring This function is available with the Viewer Versions.

Thissectionexplainsthefunctionofswitchingdisplayedprogramsusingkeyboardandmouseoperations.

Key/Mouse Monitoring Tool Window

●Launching the Key/Mouse Monitoring Tool window1. From the Windows Taskbar, click [Start], [All Programs], [SHARP Digital Signage Software], [Tools]

and then [Key-Mouse Watcher].The key/mouse monitoring tool launches and an icon ( ) is displayed (and remains permanently) in the Task Tray.

●Key/Mouse Monitoring Tool menuFromthemenuthatappearswhentheiconintheTaskTrayisright-clicked, the following operations can be performed.

ConfigurationSettheoperationmodeoftheKey/MouseMonitoringTool.

• “Disable”optionbutton DisablestheoperationoftheKey/MouseMonitoringTool.• “ScreenSaverMode”optionbutton If a keyboard or mouse operation is performed, display of

the program is stopped temporarily. If a keyboard or mouse operation is not performed for a

certain period of time, the distributed program is displayed. Byclicking[Configuration],thefollowingsettingcanbe

performed. The period of time before the program display is

resumed Theprogramdisplayisresumedbypressingthe[Ctrl],[Alt],and[V]keys.

• “ChangeProgramMode”optionbutton By assigning an action to a combination of keys, the

action can be performed by key operation. Upto20actionscanbeassigned. Set the key assignment and action by clicking [Configuration].

115


1) Click the option to be edited and click [Edit].Adialogboxwillappear.

2) Set the options.•“KeySetting” Set the combination of keys to be registered.•“Operation” Set the action of the registered key.•Ifyouselect“Viewpresetprogram,”specifytheIDnumberofthepresetprogramtobedisplayedin“IDofpresetprg.”.

If the preset program has not been imported, specify the ID number and import the program.

1)Enteranumberin“IDofpresetprg.”.2)Click[Import].3)Specifytheexportedprogramdataandclick[Open].

TheprogramisimportedtothespecifiedpresetnumberID.

•Ifyouselect“Runapplication,”enterthepathoftheapplicationtobeexecutedin“Path.”Itisalsopossibletoenter“Option.”

3) Click [OK].

•IfthesamekeyisassignedtodifferentIDs,theassignedactionisperformedinascendingorderofIDs. •Ifthe[Ctrl]keyispressedwhenPowerPointViewerislaunched,PowerPointcontentisnotdisplayedin

the correct position. Take care when displaying a program containing PowerPoint content.

•“Changeprogram,ifamouseeventcomeswhenitshowsscheduledprogram.”checkbox. Whenthischeckboxischecked,actionsareassignedtomouseoperationssothatactionscanbeperformed

by operating the mouse.1) Click [Detail]. “Assignformouseinput”willappear.

2) Set the options.•“Operation” Set the action of the registered mouse operation.•Ifyouselect“Viewpresetprogram,”specifytheIDnumberofthepresetprogramtobedisplayedin“IDofpresetprg.”.

If the preset program has not been imported, specify the ID number and import the program.

1)EntertheIDnumberin“IDofpresetprg.”.2)Click[Import].3)Specifytheexportedprogramdataandclick[Open].

•Ifyouselect“Runapplication,”enterthepathoftheapplicationtobeexecutedin“Path.”Itisalsopossibletoenter“Option.”

3) Click [OK].

•“Program”referstoascheduledprogramorabreak-inprogram.Whenapresetprogramisbeingdisplayed, the assigned action cannot be performed.


116


•“Playprogramagain,ifnoinputhascomeforacertaintime”checkbox Whenthischeckboxischecked,thenormalprogramisresumedifthekeyormouseisnotoperatedforacertain period of time.

1) Click [Detail]. The“ConfigurationforRestartProgram”dialogboxwillappear.

2) Set the options.•“Timetorestartprogramafterlastkeyevent” Set the period of time before program display is resumed.•“Restartprogramfrombeginningevenifplaying.”checkbox Checkthisboxtoplayfromthebeginningoftheprogram

when no time is designated or when there is no key or mouse input. The program will be played from the beginning even when the program is played according to schedule.

•“Executeanapplicationwhentheprogramrestart.”checkbox Ifyoucheckthischeckbox,enterthepathoftheapplicationtobeexecutedin“Path.”Itisalsopossibletoenter“Option.”

3) Click [OK].

AboutDisplaystheversionoftheKey/MouseMonitoringTool.

ExitExitstheKey/MouseMonitoringTool.


117


TheStatusMonitoringToolallowsyoutocheckpanelstatusandcontrolviewerPCpower.

The main Status Monitoring Tool window

●Launching Status Monitoring Tool1. From the Windows Taskbar, click [Start], [All Programs], [SHARP Digital Signage Software], [Tools],

[Status Monitoring Tool].“StatusMonitoringTool”willlaunch.

●The main Status Monitoring Tool window1) Menus

2) Toolbar

3)Grouptree

4) Panel list



File Exit ExitsStatusMonitoringTool. -

Panel

Select all panels Selects all panels displayed in the panel list. Fp.120Select panels without response

Selects all panels in the panel list that are not responding (includingpanelsforwhichstatushasnotbeenacquired). Fp.120

Select panels with response

Selects all panels in the panel list that are responding. Fp.120

Monitoring statusStatus Monitoring Tool

118

Status Monitoring ToolThe main Status Monitoring Tool window


Panel

Power control ofviewerPC

Power on TurnsontheviewerPCofselectedpanels. Fp.121Reboot RestartstheviewerPCofselectedpanels. Fp.121Power off TurnsofftheviewerPCofselectedpanels. Fp.121

Statusacquisitionofselected panels

Startsstatusacquisitionofselectedpanels. Fp.120

PropertyDisplays panel status details if only one panel is selected. ThisfunctioncanbeusedonlywiththeSHARPLCDmonitor (PN series).

Fp.122

Option

Operation environment Displaysthe[Settingofoperationenvironment]dialogbox. Fp.124Panel setting without status acquisition

Displaysthe[Panelsettingwithoutstatusacquisition]dialogbox. Fp.121

Thumbnailsize

SmallChangesthesizeofthumbnailsdisplayedinthepanellistto Small. Fp.123

MediumChangesthesizeofthumbnailsdisplayedinthepanellistto Medium. Fp.123

LargeChangesthesizeofthumbnailsdisplayedinthepanellisttoLarge. Fp.123

StartofstatusacquisitionStartsstatusacquisitionofallpanelsregisteredinPanelManagement(exceptforpanelssetwithoutstatusacquisition).

Fp.120

Cancelofstatusacquisition Cancelspanelstatusacquisition. Fp.120Help About Status Monitoring Tool Displays version information for Status Monitoring Tool. -



Power on TurnsontheviewerPCofselectedpanels. Fp.121

Reboot RestartstheviewerPCofselectedpanels. Fp.121

Power off TurnsofftheviewerPCofselectedpanels. Fp.121

Show the panel informationDisplays panel status details if only one panel is selected. ThisfunctioncanbeusedonlywiththeSHARPLCDmonitor (PN series).

Fp.122

Small thumbnailChangesthesizeofthumbnailsdisplayedinthepanellistto Small. Fp.123

Medium thumbnailChangesthesizeofthumbnailsdisplayedinthepanellistto Medium. Fp.123

LargethumbnailChangesthesizeofthumbnailsdisplayedinthepanellisttoLarge. Fp.123

StartofstatusacquisitionStartsstatusacquisitionofallpanelsregisteredinPanelManagement(exceptforpanelssetwithoutstatusacquisition).

Fp.120

CancelofStatusacquisition

Cancelspanelstatusacquisition. Fp.120

119


3) Group treeDisplays groups registered in Panel Management.(Fp.84)Whenagroupisselected,allthepanelsthatbelongtoit(exceptforpanelssetwithoutstatusacquisition)aredisplayed in the panel list.When“(Selectallpanels)”isselected,allpanels(exceptforpanelssetwithoutstatusacquisition)aredisplayedin the panel list.

4) Panel listDisplaysalistofallpanelsintheselectedgroupsinthegrouptree(exceptforpanelssetwithoutstatusacquisition).Panel icons and thumbnails change according to panel status.

Panel icon/thumbnail Description

DisplayedwhenthestatusesofthepanelandtheviewerPChavenotbeenacquired.

DisplayedwhenthereisnoresponsefromtheviewerPC.

DisplayedwhenthereisaresponsefromtheviewerPC,butscreencapturesofthecurrentlydisplayedscreencannotbeacquired.

(Exampleimageonly)

DisplayedwhenthereisaresponsefromtheviewerPCandscreencapturesofthecurrentlydisplayedscreencanbeacquired.*Thumbnailsofacquiredscreencaptureswillbedisplayed.(ItdiffersdependingonthedisplayoftheviewerPC.)

*Toacquireanimagecaptureofthescreen,check“AcquisitionofscreencapturedisplayingbyviewerPC”inthe[Settingofoperationenvironment]dialogbox.(Fp.124)

* The icon on the left will be displayed in the following Information Display conditions:•Thepowerisoff•A hardware error has been detected•WhenmultiplePCsarebeingconnectedandtherearedifferencesin

conditions•Whenastatusacquisitionerrorhasoccurred.

The main Status Monitoring Tool window

120

Status Monitoring ToolAcquiring and displaying panel status

Acquiring and displaying panel status

●Acquiring status of selected panels

1. Select a group from the group tree, and then select a panel from the panel list.

•Toselectallpanelsinthepanellist,eitherclick[Selectallpanels]fromthe[Panel]menu,orpress[Ctrl]+[A].

•Toselectallpanelsinthepanellistthatarenotresponding(including panels for which status has not beenacquired),eitherclick[Selectpanelswithoutresponse]fromthe[Panel]menu,orpress[Ctrl]+[Shift]+[A].

•Toselectallpanelsinthepanellistthatareresponding,eitherclick[Selectpanelswithresponse]fromthe[Panel]menu,orpress[Ctrl]+[Alt]+[A].

2. From the [Panel] menu, click [Status acquisition of selected panels].Statusacquisitionofselectedpanelswillstart.

•ToacquirepanelstatusforallpanelsregisteredinPanelManagement(exceptforpanelssetwithoutstatusacquisition),click[Startofstatusacquisition]fromthe[Option]menu,oralternatively,click .

•Tocancelpanelstatusacquisition,click[Cancelofstatusacquisition]fromthe[Option]menu,oralternatively, click .

Whenpanelstatusisacquired,paneliconsandthumbnailswill change.The image can be enlarged by double-clicking it.

121


●Setting panels for which status will not be obtainedItispossibletosetpanelsforwhichstatuswillnotbeacquiredsothattheywillnotbedisplayedinthepanellist.1. From the [Option] menu click [Panel setting without status acquisition].

2. Select panels from the “Panel list with getting status”.

3. Click [Add].

Theselectedpanelswillmovetothe“Panellistwithoutgettingstatus”.

4. Click [OK].

Toresetapanelsothatitsstatuswillbeacquired,selectitfromthe“Panellistwithoutgettingstatus”,andclick[Remove].

●Controlling viewer PC powerTheviewerPCcanbeturnedonandoff,andrestarted.

1. Select a group from the group tree, and then select a panel from the panel list.

2. To turn the viewer PC on, from the [Panel] menu, click [Power control of viewer PC] and then [Power on], or alternatively, click .

To restart the viewer PC, from the [Panel] menu, click [Power control of viewer PC] and then [Reboot], or alternatively, click

.

To turn the viewer PC off, from the [Panel] menu, click [Power control of viewer PC] and then [Power off], or alternatively, click .Aconfirmationdialogboxwillappear.

3. Click [Yes]. Theprocesswillbeexecuted.


122

Status Monitoring ToolAcquiring and displaying panel status


●Displaying detailed information for a panel1. Select a group from the group tree, and then select a

panel from the panel list.

2. From the [Panel] menu click [Property], or alternatively, click .The[Panelproperty]dialogboxwillappear.

3. Check the settings, and click [Close].

•Todisplay“Panel(PNseries)status,”check“Statusacquisitionofpanel(PNseries)”inthe[Settingofoperationenvironment]dialogbox(Fp.124)

123


●Changing thumbnail sizeItispossibletochangethesizeofthethumbnailsofthescreencapturesacquiredfromthepanels.

1. Click the buttons on the toolbar. (Small:

, Medium:

, Large:

)

Or alternatively, from the [Option] menu, click [Thumbnail size], and select the size you want to use. Small Medium Large


124


Setting the operation environmentSetadvancedsettingsforpanelstatusacquisition.

1. From the [Option] menu click [Operation environment].The[Settingofoperationenvironment]dialogboxwillappear.

2. Set the options.1)Checkthe“ResponseconfirmationofviewerPC

throughICMPECHOpacket”checkbox.(Compulsory)

Thecheckboxcannotbecleared.

•Timeout(seconds) SetsthetimeoutvalueforconfirmingaresponsefromtheviewerPC.Valuesoffrom1-10secondscanbeselected.

•Retrycount SetsthenumberofretriespermittedwhenconfirmingaresponsefromtheviewerPC.Valuesoffrom1-10times can be selected.

Ifthereisnoresponse,adelayof“timeoutvaluexnumberofretries”secondswilloccur.

2) “Acquisitionofdisplayingprograminformation”checkbox CheckthisboxtoacquireinformationaboutthecurrentlydisplayedprogramfromtheviewerPC.

3) “AcquisitionofscreencapturedisplayingbyviewerPC”checkbox CheckthisboxtoacquirethecurrentlydisplayedscreencapturefromtheviewerPC.Theacquired

screen captures will be displayed as thumbnails.

Itmaynotalwaysbepossibletoacquirescreencapturesofmovies.

4) “Statusacquisitionofpanel(PNseries)”checkbox CheckthisboxtoacquireinformationaboutthepanelfromtheviewerPC. ThisfunctioncanbeusedonlywiththeSHARPLCDmonitor(PNseries).

5) “Acquisitionoflicenseinformation”checkbox CheckthecheckboxtoviewthelicensecodeandthefileversionoftheSHARPDigitalSignage

Software viewer version.

6) “Autoacquisitionunderthefollowinginterval”checkboxCheckthisboxtoautomaticallyacquirepanelstatusatregularintervals.•Acquisitioninterval Settheintervalatwhichyouwanttoobtainpanelstatus.Valuesof1-60minutescanbeset.

3. Click [OK].

Setting the operation environment

PN-SS01/SS02/SV0112M(5)

Documents

OPERATION MANUAL€¦ · SHARP Digital Signage Software Version 4.1 PN-SS01 PN-SS02 PN-SV01 OPERATION MANUAL