Optimum Design of Honeycomb Sandwich Structures
Aproject report submitted in partial fulfilment of the
requirements for theBAHELOR DEGREEInAERONAUTICAL
ENGINEERINGSubmitted by
Vrindesh Dalmia12R21A21B5V. Niranjan12R21A21B4G.
Arun12R21A2168Under the guidance ofMr. Avinash PachuriAssitant
ProfessorDepartment of Aeronautical Engineering
MLR Institute of TechnologyLaxman Reddy Avenue, Dundigal,
Hyderabad-43 Affiliated to JNTUH
MLR Institute of TechLaxman Reddy Avenue, Dundigal,
Hyderabad-43.CERTIFICATEThis is to certify that the project work
titled Optimum Design of Honeycomb Sandwich Structure has been
carried out byVrindesh Dalmia12R21A21B5V. Niranjan12R21A21B4G.
Arun12R21A2168During the academic year2015-2016AtMLR Institute of
Technology, HyderabadA report submitted in partial fulfillment of
the requirement for the award of the B.Tech degree in aeronautical
engineering underJawaharlal Nehru Technological
University-Hyderabad
Mr. Avinash Pachori Dr. Satyanarayana Gupta Internal Guide Head
of the DepartmentAeronautical engineering Aeronautical
engineering
DECLARATION
We do declare that the thesis work entitled OPTIMUM DESIGN OF
HONEYCOMB SANDWICH STRUCTURES submitted in the department of
Aeronautical Engineering (AE), MLR Institute of Technology,
Hyderabad-43, in partial fulfillment of the requirement for the
award of the degree of Bachelors of Technology in AERONAUTICAL
ENGINEERING is a bonafide record of our own work carried
outunderthesupervision of Mr. Avinash Pachori, Assistant Professor,
Aeronautical Engineering, MLRIT.Also, we declare that the matter
embodied in this thesis has not been submitted previously by anyone
to any other university or institute for the award of any other
degree/diploma.
Station: Hyderabad
Vrindesh Dalmia12R21A21B5V. Niranjan12R21A21B4G.
Arun12R21A2168
ACKNOWLEDGEMENT
We avail this opportunity to thank all the persons with whom we
have been associated in the successful completion of our project it
has been an experience of great pleasure and satisfaction to us
while performing this project.We are grateful to Mr. Avinash
Pachori, Asst. Prof., our internal guide,andDr.Satyanaraya
Gupta,HeadofAeronauticalEngineering Department, for their guidance
and suggestions. We are also thankful to Dr. P.BHASKAR REDDY, PhD,
Principal of MLR Institute of Technology, Hyderabad. We wish to
express our deep gratitude to all teaching and non-teaching staff
members of department of Aeronautical Engineering.
