3
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. May 31, 2012 1 Product data sheet Characteristics OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Advantys OTB Product or component type I/O distributed module Integrated connection type Ethernet TCP/IP avecRJ45 , mode de transmission: 1 twisted pair à10/100 Mbit/s , serveur Webtranspar- ent ready class A10 Discrete input number 12 conformément à EN/IEC 61131 type 1 Discrete input logic Sink or source Discrete input current 5 mA pour I0...I1 5 mA pour I6...I7 7 mA pour I2...I5 7 mA pour I8...I11 Discrete output number 2 poursolid state PNP pour Q0...Q1 logique de sor- tie: source 6 pourrelay pour Q2...Q7 Discrete output current 300 mA poursolid state 2000 mA pourrelay Complementary Concept Transparent Ready Port Ethernet 10BASE-T/10BASE-TX Bus length 0...100 m , copper Number of devices per segment 0...256 Communication service Modbus messaging Web services No standard Web server Discrete input voltage 24 V Discrete input voltage type DC Discrete input type NPN or PNP Input voltage limits 20.4...26.4 V Electronic filtering time 0,035 ms pour I6...I7 at state 1 0,035 ms pour I0...I1 at state 1 0,04 ms pour I8...I11 at state 1 0,04 ms pour I2...I5 at state 1 0,045 ms pour I6...I7 at state 0 0,045 ms pour I0...I1 at state 0 0,15 ms pour I8...I11 at state 0 0,15 ms pour I2...I5 at state 0 Configurable filtering time 0 ms 3 ms 12 ms Input impedance 3,4 kOhm pour I8...I11 3,4 kOhm pour I2...I5 5,7 kOhm pour I6...I7 5,7 kOhm pour I0...I1 Discrete output voltage 24 V pourDC solid state 30 V pourDC relay 240 V pourAC relay Output voltage limits 20.4...28.8 V poursolid state Output current limits 360 mA poursolid state Current per output common 8 A pourrelay ≤ 0,72 A poursolid state Current consumption 5 mA à 5 V DC (at state 0)pourrelay output 30 mA à 5 V DC (at state 1)pourrelay output 40 mA à 24 V DC (at state 1)pourrelay output Output overvoltage protection 38...40 V

OTB1E0DM9LP

Embed Size (px)

DESCRIPTION

I/O distributed module OTB - Ethernet TCP/IP

Citation preview

The

info

rmat

ion

prov

ided

in th

is d

ocum

enta

tion

cont

ains

gen

eral

des

crip

tions

and

/or t

echn

ical

cha

ract

eris

tics

of th

e pe

rform

ance

of t

he p

rodu

cts

cont

aine

d he

rein

.Th

is d

ocum

enta

tion

is n

ot in

tend

ed a

s a

subs

titut

e fo

r and

is n

ot to

be

used

for d

eter

min

ing

suita

bilit

y or

relia

bilit

y of

thes

e pr

oduc

ts fo

r spe

cific

use

r app

licat

ions

.It

is th

e du

ty o

f any

suc

h us

er o

r int

egra

tor t

o pe

rform

the

appr

opria

te a

nd c

ompl

ete

risk

anal

ysis

, eva

luat

ion

and

test

ing

of th

e pr

oduc

ts w

ith re

spec

t to

the

rele

vant

spe

cific

app

licat

ion

or u

se th

ereo

f.N

eith

er S

chne

ider

Ele

ctric

Indu

strie

s SA

S no

r any

of i

ts a

ffilia

tes

or s

ubsi

diar

ies

shal

l be

resp

onsi

ble

or li

able

for m

isus

e of

the

info

rmat

ion

cont

aine

d he

rein

.

May 31, 20121

Product data sheetCharacteristics

OTB1E0DM9LPI/O distributed module OTB - Ethernet TCP/IP -0..100 m

MainRange of product Advantys OTBProduct or componenttype

I/O distributed module

Integrated connectiontype

Ethernet TCP/IP avecRJ45 , mode de transmission:1 twisted pair à10/100 Mbit/s , serveur Webtranspar-ent ready class A10

Discrete input number 12 conformément à EN/IEC 61131 type 1Discrete input logic Sink or sourceDiscrete input current 5 mA pour I0...I1

5 mA pour I6...I77 mA pour I2...I57 mA pour I8...I11

Discrete output number 2 poursolid state PNP pour Q0...Q1 logique de sor-tie: source6 pourrelay pour Q2...Q7

Discrete output current 300 mA poursolid state2000 mA pourrelay

ComplementaryConcept Transparent ReadyPort Ethernet 10BASE-T/10BASE-TXBus length 0...100 m , copperNumber of devices per segment 0...256Communication service Modbus messagingWeb services No standard Web serverDiscrete input voltage 24 VDiscrete input voltage type DCDiscrete input type NPN or PNPInput voltage limits 20.4...26.4 VElectronic filtering time 0,035 ms pour I6...I7 at state 1

0,035 ms pour I0...I1 at state 10,04 ms pour I8...I11 at state 10,04 ms pour I2...I5 at state 10,045 ms pour I6...I7 at state 00,045 ms pour I0...I1 at state 00,15 ms pour I8...I11 at state 00,15 ms pour I2...I5 at state 0

Configurable filtering time 0 ms3 ms12 ms

Input impedance 3,4 kOhm pour I8...I113,4 kOhm pour I2...I55,7 kOhm pour I6...I75,7 kOhm pour I0...I1

Discrete output voltage 24 V pourDC solid state30 V pourDC relay240 V pourAC relay

Output voltage limits 20.4...28.8 V poursolid stateOutput current limits 360 mA poursolid stateCurrent per output common 8 A pourrelay

≤ 0,72 A poursolid stateCurrent consumption 5 mA à 5 V DC (at state 0)pourrelay output

30 mA à 5 V DC (at state 1)pourrelay output40 mA à 24 V DC (at state 1)pourrelay output

Output overvoltage protection 38...40 V

2

Tungsten load 8 W pour solid stateResponse time 5 µs at state 0 pour solid state

5 µs at state 1 pour solid state300 µs at state 1 pour relay300 µs at state 0 pour relay

Switchable load ≥ 0,1 mAContact bounce time ≤ 1 ms pour relayLeakage current ≤ 0,1 mA at state 0 pour solid stateDrop-out voltage ≤ 1 V at state 1Insulation between channels and internal logic 500 Vrms for 1 minute pour input circuit

500 Vrms for 1 minute pour solid state output1500 Vrms for 1 minute pour relay output

Insulation between channels NoneContact resistance ≤ 30 mOhmElectrical durability 500000 cycles AC-1 avec 500 VA charge pour relay output

500000 cycles AC-14 avec 250 VA charge pour relay output500000 cycles AC-15 avec 200 VA charge pour relay output500000 cycles DC-1 avec 60 W charge pour relay output500000 cycles DC-13 avec 30 W charge pour relay output

Supply circuit type DC[Us] rated supply voltage 24 VSupply voltage limits 20,4...26,2 VInput current ≤ 700 mA à 26.2 V pour supply circuitInrush current ≤ 1 A pour solid state output

≤ 50 A pour supply circuitPower consumption 19 WNumber of I/O expansion module 0...7I/O expansion capacity 7 x 8I or 7 x 2I or 7 x (4I/2O) avec screw terminal analogue I/O module(s)

132 avec screw terminal discrete I/O module(s)188 avec spring terminal discrete I/O module(s)244 avec HE10 connector discrete I/O module(s)

Insulation resistance ≥ 10 MOhm between power supply and earth≥ 10 MOhm between I/O and earth terminals

I/O connection Removable screw terminal blockNumber of common point 1 pour input

1 pour solid state output1 pour relay output (1 NO)1 pour relay output (2 NO)1 pour relay output (3 NO)

Counting input number 2Counting capacity 32 bitsCounting frequency 5000 Hz

20000 HzPulse generator number 2Pulse generator frequency 7 kHzPulse generator function RPLS pulse generator output

RPWM pulse width modulationMarking CEFixing mode By clips sur 35 mm symmetrical DIN rail

By screws sur panel with fixing kitBy screws sur solid plate with fixing kit

Status LED 1 LED , green pour PWR1 LED , yellow pour STAT1 LED , green pour 10T1 LED , yellow pour 100T1 LED per channel , green pour I/O

Product weight 0,185 kg

3

EnvironmentIP degree of protection IP20Immunity to microbreaks 10 ms pour supply circuitDielectric strength 500 V between power supply and earth

500 V between I/O and earth terminalsStandards CSA

CSA C22.2 No. 213 (Class 1 Division 2 Groups A)CSA C22.2 No. 213 (Class 1 Division 2 Groups B)CSA C22.2 No. 213 (Class 1 Division 2 Groups C)CSA C22.2 No. 213 (Class 1 Division 2 Groups D)EN 61131-2IEC 61131-2UL 508

Product certifications CULusAmbient air temperature for operation 0...55 °CAmbient air temperature for storage -25...70 °CRelative humidity 30...95 % without condensationPollution degree 2 conformément à IEC 60664

2 conformément à EN 60664Operating altitude 0...2000 mStorage altitude 0...3000 mVibration resistance 0.075 mm (f = 10...57 Hz) sur 35 mm symmetrical DIN rail

1 gn (f = 57...150 Hz) sur 35 mm symmetrical DIN railShock resistance 15 gn pour 11 ms conformément à IEC 61131

15 gn pour 11 ms conformément à EN 61131Resistance to electrostatic discharge 4 kV in contact conformément à IEC 61000-4-2

4 kV in contact conformément à EN 61000-4-28 kV in air conformément à IEC 61000-4-28 kV in air conformément à EN 61000-4-2

Resistance to radiated fields 10 V/m , 80000000...2000000000 Hz conformément à IEC 61000-4-310 V/m , 80000000...2000000000 Hz conformément à EN 61000-4-3

Resistance to fast transients 1 kV pour 24 V solid state I/O conformément à IEC 61000-4-42 kV pour 24 V supply conformément à IEC 61000-4-4

RoHS EUR conformity date 0908RoHS EUR status Compliant