We’ve spent the last 90 years researching,
developing and refining GIB® Standard in
our local manufacturing plants. The result is
the ultimate combination of plaster density,
fibreglass reinforcing, honeycomb core
technology and strong, flat paper lining giving it
the optimal balance of performance and weight
for New Zealand conditions.
Which means you can use it with complete
confidence on walls and ceilings.
Learn more about the advantages of GIB® Standard opposite or
view the short video at gib.co.nz/thestandard
We know the balance of weight and performance that works for New
Zealand conditions.
GIB® Standard never lets you down.
Built-in high performanceFor use in GIB EzyBrace®, GIB® Fire
Rated and GIB Noise Control® Systems.
Strength with great flexibility For easy sheet manoeuvrability
and lifting with less risk of damage and wastage.
Easy screw bedding For quick installation.
Flat and uniform surfaceFor a consistent, high quality
finish.
Strong and rigidFor easy sheet lifting and long lasting flat
ceilings. Thicker 13mm GIB® Standard is recommended on ceilings
because New Zealand’s wet and humid conditions can cause ceiling
sag to be amplified.
Comprehensive back-up and support We are 100% behind all our
products and systems.
Manufactured in New Zealand for New Zealand’s unique conditions,
with the optimal balance of performance
and weight, 10mm and 13mm GIB® Standard provide peace of mind on
site and long after you’ve left it.
Our country is unique.
Complete peace of mind.
We put all our time, energy and care into delivering not only
reliable plasterboard products, but also systems, services and
support that help your jobs run smoothly. So you can build, and
move onto your next project, with complete peace of mind.
