Paddle Wheel Flow Meters and Instruments -02-0… · Orders $200.00 to $500.00 Net ... † POM = "Polyoxymethylene". * ECTFE is also referred to as "Halar ® ". † POM = "Polyoxymethylene"

Price List USF05-1

55 Guardsman RoadThornhill, OntarioCanada, L3T 6L2

Tel: 905-889-7890Fax: [email protected]

Effective March 1, 2005Supersedes Price List F04-2All Prices are in U.S. DollarsSubject to change without notice

PDF Published February 8, 2006

Page

Flow Sensors 2-4

Instruments 5

Instrument Mounting Kits 5

Flow Switches 6

Blind Transmitters 7

Packages

Monitor/Transmitter 8-13

Battery Powered Flow Monitor 14-15

Batch Controller 16-17

ULF Monitor/Transmitter 18

ULF Battery Powered Flow Monitor 19

ULF Batch Controller 19

Installation Fittings 20-21

Plugs 21

Electromagnetic Flow Transmitter 22

Flow Units Conversion Chart 22

Flow Meter Selection Questionnaire 23

Paddle Wheel Flow Metersand Instruments

Established in 1968Your Pipeline To Quality Valves,Piping, Flow Meters and Controls

02/06 ©Chemline Plastics Limited 2006Chemline is a registered trade mark of Chemline Plastics Limited

Digiflow® is a registered trade mark of Chemline Flow Control Limited

Orders over US$500.00 Net– No additional charge for shipping*

anywhere in the continental U.S.A.

Orders $200.00 to $500.00 Net– Add $40.00 to order for shipping*.

Orders under $200.00 Net– All shipping* charges are collect.

* Shipping charges include U.S. Duty, Brokerage, Ground Freight andInsurance.

Chemline accepts:

davidb

06/22/05 - Updated price on POM sensor 02/08/06 - changed some graphics only

Flow Sensors

2 Price List USF05-1 Consult Chemline Plastics for availability.Subject to change without notice.

Type F3.01.H – for Direct Mounting to Instruments

Type F3.00.H – for Connection to Panel or Wall Mount Instruments

Flow SensorsInstallation fittings are required for these paddle wheel typesensors. See pages 20 and 21 for fittings and to determine sensorlength required (L0 or L1).

Hall Effect SensorsHall Effect Flow Sensors require a supply voltage between 5 and24 VDC. A square wave output signal is generated with frequencyproportional to flow velocity. The signal is normally fed to aF9.00, F9.01, F9.02, F9.03 or F9.50 Instrument which will supplypower to the sensor. See page 5.

F3.00 IP65

IP68 – NEMA 6, 6PSupplied with 6" long

cable, 22 AWG,3 conductors

L0

F3.01.H.01334.00

F3.01.H.02334.00

CPVCElectrical Class

Sensor Length

Body

0-Ring

EPDM

Viton®

L1

F3.01.H.03351.00

F3.01.H.04351.00

L0

F3.01.H.05453.00

F3.01.H.06453.00

PVDF

L1

F3.01.H.07637.00

F3.01.H.08637.00

IP68 – NEMA 6, 6PSupplied with 8 m(26’) long cable, 22AWG, 3 conductors

L0

F3.00.H.01414.00

F3.00.H.02414.00


EPDM

Viton®

IP65 – NEMA 4, 4XSupplied with

4-pole cable plug(cable is not supplied)

F3.00.H.13414.00

F3.00.H.14414.00

L1

F3.00.H.03434.00

F3.00.H.04434.00

F3.00.H.15434.00

F3.00.H.16434.00

L0

F3.00.H.05554.00

F3.00.H.06554.00

PVDF

F3.00.H.17554.00

F3.00.H.18554.00

L1

F3.00.H.07718.00

F3.00.H.08718.00

F3.00.H.19718.00

F3.00.H.20718.00

EPDM

Viton®

F3.01 IP68For Direct Mount For Panel or Wall Mount

Sensor Length

Body

O-Ring

F3.00 IP68



Electrical ClassSensor Length

Body

0-Ring

EPDM

Viton®

L0

F3.01.H.09642.00

F3.01.H.10642.00

316L SS

L1

F3.01.H.11674.00

F3.01.H.12674.00

L0

F3.01.H.25515.00

F3.01.H.26515.00

L1

F3.01.H.27663.00

F3.01.H.28663.00

BrassNew

New


Electrical Class

EPDM

Viton®



L0

F3.00.H.09798.00

F3.00.H.10798.00

316L SS

F3.00.H.21798.00

F3.00.H.22798.00

L1

F3.00.H.11838.00

F3.00.H.12838.00

F3.00.H.23838.00

F3.00.H.24838.00

L0

F3.00.H.25 593.00

F3.00.H.26 593.00

F3.00.H.29 593.00

F3.00.H.30 593.00

L1

F3.00.H.27 741.00

F3.00.H.28 741.00

F3.00.H.31 741.00

F3.00.H.32 741.00

EPDM

Viton®

Sensor Length

Body

O-Ring

Brass

Type F3.01.C – for Direct Mounting to Instruments

Type F3.00.C – for Connection to Panel or Wall Mount Instruments



L0

F3.01.C.01334.00

F3.01.C.02334.00


EPDM

Viton®

L1

F3.01.C.03351.00

F3.01.C.04351.00

L0

F3.01.C.05453.00

F3.01.C.06453.00

PVDF

L1

F3.01.C.07637.00

F3.01.C.08637.00


L0

F3.00.C.01414.00

F3.00.C.02414.00


EPDM

Viton®



F3.00.C.13414.00

F3.00.C.14414.00

L1

F3.00.C.03434.00

F3.00.C.04434.00

F3.00.C.15434.00

F3.00.C.16434.00

L0

F3.00.C.05554.00

F3.00.C.06554.00

PVDF

F3.00.C.17554.00

F3.00.C.18554.00

L1

F3.00.C.07718.00

F3.00.C.08718.00

F3.00.C.19718.00

F3.00.C.20718.00

EPDM

Viton®

Flow SensorsInstallation fittings are required for these paddle wheel typesensors. See pages 20 and 21 for fittings and to determine sensorlength required (L0 or L1).

Coil Effect SensorsCoil Effect Flow Sensors require a supply voltage between 3 and 5VDC. A square wave output signal is generated with frequencyproportional to flow velocity. The signal is normally fed to theF9.20 battery powered (3.6 V) flow monitor. See page 5.

Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring

Flow Sensors



Electrical Class

EPDM

Viton®

L0

F3.01.C.25 515.00

F3.01.C.26 515.00

Brass

L1

F3.01.C.27 663.00

F3.01.C.28 663.00

L0

F3.01.C.09642.00

F3.01.C.10642.00

316L SS

L1

F3.01.C.11674.00

F3.01.C.12674.00


Electrical Class

EPDM

Viton®



L0

F3.00.C.25 593.00

F3.00.C.26 593.00

Brass

F3.00.C.29 593.00

F3.00.C.30 593.00

L1

F3.00.C.27 741.00

F3.00.C.28 741.00

F3.00.C.31 741.00

F3.00.C.32 741.00

L0

F3.00.C.09798.00

F3.00.C.10798.00

316L SS

F3.00.C.21798.00

F3.00.C.22798.00

L1

F3.00.C.11838.00

F3.00.C.12838.00

F3.00.C.23838.00

F3.00.C.24838.00

EPDM

Viton®

F3.00 IP65F3.01 IP68For Direct Mount For Panel or Wall Mount

Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring

F3.00 IP68

Price List USF05-1 3 Consult Chemline Plastics for availability.Subject to change without notice.

New

New

Flow Sensors

Type ULF.R – for Connection to Panel or Wall Mount Instruments

Flow Sensors for Hot-Tap InstallationIsolation valve and Hot-Tap installation fittings are required. See page 21.

Hall Effect SensorThe Hall Effect Type F111.H Flow Sensor requires a supply voltage between 5 and 24 VDC. A squarewave output signal is generated with frequency proportional to flow velocity. The signal is normallyfed to a F9.00, F9.01, F9.02, F9.03 or F9.50 Instrument. See page 5.

Ultra Low Flow SensorsSensors have male threaded in-line connections,1/4" BSP.Supplied with 2 m (6.5 ft) long cable.

Hall Effect SensorsULF Hall Effect Flow Sensors require a supply voltage between 5 and 24 VDC. A squarewave output signal is generated proportional to flow velocity. The signal is normallyfed to a F9.01, F9.02, F9.03 or F9.50 Instrument. See page 5.

F111

IP65 – NEMA 4, 4X

1.5 – 100 l/h 6 – 250 l/h 1.5 – 100 l/h 6 – 250 l/h 1.5 – 100 l/h 6 – 250 l/h

ULF01.H.0200.00

Electrical Class

ULF03.H.0200.00

ULF01.H.2444.00

ECTFE* Body / Viton® O-RingPOM† Body / Viton® O-Ring

ULF03.H.2444.00

ULF01.H.3694.00

ECTFE* Body / Kalrez O-Ring

ULF03.H.3694.00

Type ULF.H – for Connection to Panel or Wall Mount Instruments

Reed Effect SensorsULF Reed Sensors require no power supply. A square wave output signal (a volt free contact) is generated proportional to the flowvelocity. The signal is normally fed to the F9.20 battery powered (3.6 V) remote flow monitor or to the F9.00 flowmonitor/transmitter. See page 5.

PriceItem No.Pipe SizeSensor Body / Seal

304SS / Viton® 3" – 24" F111.H 2,638.00Brass 2" F111.H–Brass 1,648.00

Coil Effect Sensor The Coil Effect Type F111.C Flow Sensor requires a supply voltage between 3 to 5 VDC. A square wave output signal is generatedwith frequency proportional to flow velocity. The signal is normally fed to the F9.20 battery powered (3.6 V) flow monitor.See page 5.

Item No.Pipe SizeSensor Body / Seal

304SS / Viton® 3" – 24" F111.C 2,638.00Brass 2" F111.C–Brass 1,648.00

ULFF3.80

IP65 – NEMA 4, 4X

1.5 – 100 l/h 6 – 250 l/h 1.5 – 100 l/h 6 – 250 l/h 1.5 – 100 l/h 6 – 250 l/h

ULF01.R.0219.00

Electrical Class

ULF03.R.0219.00

ULF01.R.2418.00


ULF03.R.2418.00

ULF01.R.3653.00


ULF03.R.3653.00

† POM = "Polyoxymethylene". * ECTFE is also referred to as "Halar®".


Type F3.80 Oval Gear Flow Sensors – for High Viscosity Fluid MeasurementType F3.80 Flow Sensors require a supply voltage between 5 and 24 VDC. A square wave output signal is generated proportionalto flow velocity. The signal is normally fed to a F9.01, F9.02, F9.03 or F9.50 Instrument. See page 5.

IP65 – NEMA 4, 4X

10 – 100 l/h 25 – 250 l/h 10 – 100 l/h 25 – 250 l/h 10 – 100 l/h 25 – 250 l/h

F3.81.H.01728.00

Electrical Class

F3.82.H.01728.00

F3.81.H.021,072.00

ECTFE / ECTFE GearsPP / ECTFE Gears

F3.82.H.021,072.00

F3.81.H.031,360.00

316L SS / ECTFE Gears

F.3.82.H.031,366.00

Type F3.80 – for Connection to Panel or Wall Mount Instruments

Special versions with 4–20 mA output or alarm output are available on request.


New

New

New

Price

Instruments

Types F9.00, F9.01, F9.02, F9.03 – Flow Monitor and TransmitterRequired Supply Voltage: 12 – 24 VDCDisplays: Flow Rate – 5 digits

Resettable Total – 6 digitsNon-Resettable Total – 10 digits

F9.20

F9.50

F9.00, F9.01, F9.02, F9.03

PriceItem No.No. of LEDsOutputs

Outputs

Type F9.50 – Batch ControllerRequired Supply Voltage: 12 – 24 VDCDisplays: Batch in Progress – 6 digits

Flow Rate – 5 digitsResettable Total – 6 digitsNon-Resettable Total – 10 digits

Type F9.20 – Battery Powered Flow MonitorPower Supply: 2 x 3.6 Volt Lithium Batteries (included)Displays: Flow Rate – 5 digits

Resettable Total – 6 digitsNon-Resettable Total – 10 digits

Instrument Mounting KitsMounting kits are required for installation of the 1/4 DINinstruments above. The direct mount kit is for connecting theinstrument directly to a paddle wheel flow sensor. The panel orwall mount kits are for remote installations.

InstrumentsInstruments are 1/4 DIN size with monolithic NEMA 4X polycarbonate enclosure,epoxy encapsulated electronics with 5 button silicone rubber key pad, 3-line LCDdisplay and output indicating LEDs (except battery powered unit). Modular designallows the same unit to be mounted in different ways. See Instrument Mounting Kitsbelow. Set up is easy using the key pad and self-explanatory menus.

Panel Mount KitDirect Mount Kit Wall Mount Kit

PriceApplication Description Item No.Direct Mount ABS enclosure with EPDM gasket, cap, locking ring F9.KC1 86.00and 4 screwsPanel Mount Metal mounting clip with Neoprene foam gasket F9.KP1 36.00Wall Mount 1 ABS box with EPDM gasket and screws F9.KW1 58.00Wall Mount 2 ABS box with EPDM gasket, screws and F9.KW2 132.00110/230 VAC to 24 VDC transformer included

PriceItem No.

PriceItem No.

4 – 20 mA 2 wire, 1 open collector* 1 F9.00 657.004 – 20 mA 3/4 wire, 3 open collectors* 3 F9.01 685.004 – 20 mA 3/4 wire, 1 open collector*, 2 SPDT relays† 3 F9.02 697.004 – 20 mA 3/4 wire, 1 open collector*, 2 SPDT relays† 3 F9.03 980.00Accepts input from 2 Hall Effect Sensors, Output and Displays for both sensors are same as above.

No. of LEDs

Outputs No. of LEDs

None – Flow Rate and Total indication only 0 F9.20 885.00

4 – 20 mA 3/4 wire, 1 open collector**, 2 SPDT relays†† 3 F9.50 760.00

* Open Collector is selectable as MIN alarm, MAX alarm, Pulse (i.e. 1 pulse per 10 gallons) or Frequency (scaleable).† Relay is selectable as MIN alarm, MAX alarm or Pulse (i.e. one pulse per 10 gallons).

** Open collector is selectable as START Batch or END Batch.†† Relay OUT1 is batch in progress indication.

Relay OUT2 is selectable as two-stage shutdown, end ofbatch, overrun alarm or missing signal alarm.


New

Flow Switches

IP65 – NEMA 4, 4XSupplied with 4-pole

cable plug(cable is not supplied)

L0

F3.05.01404.00

F3.05.02404.00


EPDM

Viton®

L1

F3.05.03428.00

F3.05.04428.00

L0

F3.05.05631.00

F3.05.06631.00

PVDF

L1

F3.05.07671.00

F3.05.08671.00

Adjustable Flow SwitchesType F3.15 and ULF3.15 Adjustable Flow Switches requires a supply voltage between 12 and 24 VDC. The MIN alarm set point canbe adjusted for velocity from 0.15 to 1 m/s (0.5 to 3.3 ft/s). Switch output is an SPDT relay. Switch delay is 3 or 10 seconds. Abicolour LED indicator shows: Red = no flow and Green = flow. Included is one open collector (frequency) output which may besent to an instrument for flow rate monitoring.

Type F3.15 – Paddle Wheel Installation fittings are required.††

Type ULF3.15 – Ultra-Low Flow End connections are male threaded, in-line 1/4" BSP.

Flow SwitchesType F3.05 – No-Flow SwitchesType F3.05 No-Flow Switches have a paddle wheel type flow sensor.They require a supply voltage between 12 and 24 VDC. Output is anormally open SPST switch. Switch point is at a velocity of 0.15m/sec. (0.5ft/sec.), not adjustable. Delay is 2 seconds. A bicolourLED indicator shows: Red = no flow and Green = flow. Installationfittings are required.††

IP65 – NEMA 4, 4X

L0

F3.15.H.01512.00

F3.15.H.02512.00


EPDM

Viton®

L1

F3.15.H.03529.00

F3.15.H.04529.00

L0

F3.15.H.05631.00

F3.15.H.06631.00

PVDF

L1

F3.15.H.07815.00

F3.15.H.08815.00

F3.15 ULF3.15F3.05

IP65 – NEMA 4, 4X

1.5 – 21 l/h 6 – 53 l/h 1.5 – 21 l/h 6 – 53 l/h 1.5 – 21 l/h 6 – 53 l/h

ULF3.15.01.0516.00

Electrical Class

ULF3.15.03.0541.00

ULF3.15.01.2750.00


ULF3.15.03.2804.00

ULF3.15.01.3945.00


ULF3.15.03.3981.00

Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring


1.5 – 100 l/h 6 – 250 l/h 1.5 – 100 l/h 6 – 250 l/h 1.5 – 100 l/h 6 – 250 l/h

Flow Rate

Trip Point

IP65 – NEMA 4, 4XSupplied with 4-pole

cable plug(cable is not supplied)

Electrical Class

EPDM

Viton®

L0

F3.05.09766.00

F3.05.10766.00

316L SS

L1

F3.05.11806.00

F3.05.12806.00

L0

F3.05.13647.00

F3.05.14647.00

Brass

L1

F3.05.15703.00

F3.05.16703.00

Sensor Length

Body

O-Ring

New

New

† POM = "Polyoxymethylene". * ECTFE is also referred to as "Halar®". †† See pages 20 and 21 for fittings and to determine sensor length required (L0 or L1).

IP65 – NEMA 4, 4X

Electrical Class

EPDM

Viton®

L0

F3.15.H.09821.00

F3.15.H.10821.00

316L SS

L1

F3.15.H.11852.00

F3.15.H.12852.00

L0

F3.15.H.13 671.00

F3.15.H.14 671.00

Brass

L1

F3.15.H.15 818.00

F3.15.H.16 818.00

Sensor Length

Body

O-Ring

Blind Transmitters

Blind TransmittersType F3.30 transmitters have no display. Required supply voltage is 12 to 24 VDC.Output is 4 to 20 mA 3 wire.

IP65 – NEMA 4, 4X

Electrical Class

EPDM

Viton®

L0

F3.30.H.091,071.00

F3.30.H.101,071.00

316L SS

L1

F3.30.H.111,104.00

F3.30.H.121,104.00

L0

F3.30.H.13 952.00

F3.30.H.14 952.00

Brass

L1

F3.30.H.15 1,069.00

F3.30.H.16 1,069.00

Sensor Length

Body

O-Ring


New

Type F3.30 – Paddle Wheel Installation fittings are required.††

IP65 – NEMA 4, 4X

L0

F3.30.H.01763.00

F3.30.H.02763.00


EPDM

Viton®

L1

F3.30.H.03780.00

F3.30.H.04780.00

L0

F3.30.H.05882.00

F3.30.H.06882.00

PVDF

L1

F3.30.H.071,066.00

F3.30.H.081,066.00

Type ULF3.30 – Ultra-Low Flow End connections are male threaded, in-line 1/4" BSP.

IP65 – NEMA 4, 4X

1.5 – 100 l/h 6 – 250 l/h 1.5 – 100 l/h 6 – 250 l/h 1.5 – 100 l/h 6 – 250 l/h

ULF3.30.01.0599.00

Electrical Class

ULF3.30.03.0624.00

ULF3.30.01.2828.00


ULF3.30.03.2871.00

ULF3.30.01.31,014.00


ULF3.30.03.31,057.00

Sensor Length

Body

O-Ring

† POM = "Polyoxymethylene". * ECTFE is also referred to as "Halar®". †† See pages 20 and 21 for fittings and to determine sensor length required (L0 or L1).

F3.30 ULF3.30

Packages


Panel Mount InstrumentDirect Mount Package Wall Mount Instrument

F9.00 Monitor/Transmitter PackagesF9.00 Monitor/Transmitter packages come complete with:

1. F9.00 Flow Monitor and Transmitter. See page 5.2. Instrument Mounting Kit. See page 5.3. Flow Sensor F3.01.H or F3.00.H. See page 2.

(Power supply provided by the flow monitor).

See pages noted for component descriptions and unit prices.

Installation fittings are required for these paddle wheel typesensors. See pages 20 and 21 for fittings and to determine sensorlength required (L0 or L1).

Displays: Flow Rate – 5 digits,Resettable Total – 6 digitsNon-resettable Total – 10 digits

Outputs: 4 to 20 mA 2 wire plus 1 open collectorLEDs: 1

L0

CPVCConfiguration Required Voltage L1 L0

PVDF

L1

Direct Mount12 – 24 VDC

Panel Mount12 – 24 VDC

L0

F9.00.011,077.00

F9.00.021,077.00

F9.00.P1.011,107.00

F9.00.P1.021,107.00

CPVCConfiguration Required Voltage

EPDM

Viton®

EPDM

Viton®

Wall Mount 112 – 24 VDC

F9.00.W1.011,129.00

F9.00.W1.021,129.00

L1

F9.00.031,094.00

F9.00.041,094.00

F9.00.P1.031,127.00

F9.00.P1.041,127.00

F9.00.W1.031,149.00

F9.00.W1.041,149.00

L0

F9.00.051,196.00

F9.00.061,196.00

F9.00.P1.051,247.00

F9.00.P1.061,247.00

PVDF

F9.00.W1.051,269.00

F9.00.W1.061,269.00

L1

F9.00.071,380.00

F9.00.081,380.00

F9.00.P1.071,411.00

F9.00.P1.081,411.00

F9.00.W1.071,433.00

F9.00.W1.081,433.00

Wall Mount 2110 – 230 VAC

Components

Instrument – F9.00Mounting Kit – F9.KP1

Sensor – F3.00.H.xx

Instrument – F9.00Mounting Kit – F9.KW1




F9.00.W2.011,203.00

F9.00.W2.021,203.00

EPDM

Viton®

F9.00.W2.031,223.00

F9.00.W2.041,223.00

F9.00.W2.051,343.00

F9.00.W2.061,343.00

F9.00.W2.071,507.00

F9.00.W2.081,507.00

EPDM

Viton®

Sensor Electrical Class – IP68 (NEMA 6, 6P), supplied with 8 m (26 ft.) long cable, 22 AWG, 3 conductors.

F3.00.H IP68F3.00.H IP65

Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring



F9.00.P1.131,107.00

F9.00.P1.141,107.00

F9.00.W1.131,129.00

F9.00.W1.141,129.00

EPDM

Viton®

EPDM

Viton®


Instrument – F9.00Mounting Kit – F9.KC1


Components

Instrument – F9.00 Mounting Kit – F9.KP1






F9.00.W2.131,203.00

F9.00.W2.141,203.00

F9.00.P1.151,127.00

F9.00.P1.161,127.00

F9.00.W1.151,149.00

F9.00.W1.161,149.00

F9.00.W2.151,223.00

F9.00.W2.161,223.00

F9.00.P1.171,247.00

F9.00.P1.181,247.00

F9.00.W1.171,269.00

F9.00.W1.181,269.00

F9.00.W2.171,343.00

F9.00.W2.181,343.00

F9.00.P1.191,411.00

F9.00.P1.201,411.00

F9.00.W1.191,433.00

F9.00.W1.201,433.00

F9.00.W2.191,507.00

F9.00.W2.201,507.00

EPDM

Viton®

Sensor Electrical Class – IP65 (NEMA 4, 4X), supplied with 4 pole cable plug for remote installation (cable is not supplied).

Packages


F9.00 Monitor/Transmitter PackagesF9.00 Monitor/Transmitter packages come complete with:






Outputs: 4 to 20 mA 2 wire plus 1 open collectorLEDs: 1

Configuration Required Voltage L0

316L SS

L1



Configuration Required Voltage

EPDM

Viton®

EPDM

Viton®


L0

F9.00.091,385.00

F9.00.101,385.00

F9.00.P1.091,491.00

F9.00.P1.101,491.00

316L SS Brass

F9.00.W1.091,513.00

F9.00.W1.101,513.00

L1

F9.00.111,417.00

F9.00.121,417.00

F9.00.P1.111,531.00

F9.00.P1.121,531.00


Components







EPDM

Viton®

F9.00.W2.091,587.00

F9.00.W2.101,587.00

F9.00.W2.111,627.00

F9.00.W2.121,627.00

F9.00.W1.111,553.00

F9.00.W1.121,553.00

L0

Brass

L1

F9.00.P1.251,286.00

F9.00.P1.261,286.00

F9.00.W1.251,308.00

F9.00.W1.261,308.00

F9.00.P1.271,434.00

F9.00.P1.281,434.00

F9.00.W2.251,382.00

F9.00.W2.261,382.00

F9.00.W2.271,530.00

F9.00.W2.281,530.00

F9.00.W1.271,456.00

F9.00.W1.281,456.00

EPDM

Viton®


F3.00.H IP68F3.00.H IP65

Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring



EPDM

Viton®

EPDM

Viton®




Components







F9.00.P1.211,491.00

F9.00.P1.221,491.00

F9.00.W1.211,513.00

F900.W1.221,513.00

F9.00.W2.211,587.00

F9.00.W2.221,587.00

F9.00.P1.231,531.00

F9.00.P1.241,531.00

F9.00.W1.231,553.00

F9.00.W1.241,553.00

F9.00.W2.231,627.00

F9.00.W2.241,627.00

L0

F9.00.251,258.00

F9.00.261,258.00

L1

F9.00.271,406.00

F9.00.281,406.00

F9.00.P1.291,286.00

F9.00.P1.301,286.00

F9.00.W1.291,308.00

F9.00.W1.301,308.00

F9.00.W2.291,382.00

F9.00.W2.301,382.00

F9.00.P1.311,434.00

F9.00.P1.321,434.00

F9.00.W1.311,456.00

F9.00.W1.321,456.00

F9.00.W2.311,530.00

F9.00.W2.321,530.00

EPDM

Viton®

Price List USF05-1 9Consult Chemline Plastics for availability.Subject to change without notice.


New

New

Packages


F9.01 Monitor/Transmitter Packages F9.01 Monitor/Transmitter packages come complete with:





Displays: Flow Rate – 5 digitsResettable Total – 6 digitsNon-resettable Total – 10 digits

Outputs: 4 to 20 mA 3/4 wire plus 3 open collectorsLEDs: 3

L0


PVDF

L1


L0

F9.01.011,105.00

F9.01.021,105.00


EPDM

Viton®

L1

F9.01.031,122.00

F9.01.041,122.00

L0

F9.01.051,224.00

F9.01.061,224.00

PVDF

L1

F9.01.071,408.00

F9.01.081,408.00



F3.00.H IP68F3.00.H IP65

Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring



F9.01.P1.131,135.00

F9.01.P1.141,135.00

F9.01.W1.131,157.00

F9.01.W1.141,157.00

EPDM

Viton®

EPDM

Viton®




Components







F9.01.W2.131,231.00

F9.01.W2.141,231.00

F9.01.P1.151,155.00

F9.01.P1.161,155.00

F9.01.W1.151,177.00

F9.01.W1.161,177.00

F9.01.W2.151,251.00

F9.01.W2.161,251.00

F9.01.P1.171,275.00

F9.01.P1.181,275.00

F9.01.W1.171,297.00

F9.01.W1.181,297.00

F9.01.W2.171,371.00

F9.01.W2.181,371.00

F9.01.P1.191,439.00

F9.01.P1.201,439.00

F9.01.W1.191,461.00

F9.01.W1.201,461.00

F9.01.W2.191,535.00

F9.01.W2.201,535.00

EPDM

Viton®


F9.01.P1.011,135.00

F9.01.P1.021,135.00

EPDM

Viton®


F9.01.W1.011,157.00

F9.01.W1.021,157.00

F9.01.P1.031,155.00

F9.01.P1.041,155.00

F9.01.W1.031,177.00

F9.01.W1.041,177.00

F9.01.P1.051,275.00

F9.01.P1.061,275.00

F9.01.W1.051,297.00

F9.01.W1.061,297.00

F9.01.P1.071,439.00

F9.01.P1.081,439.00

F9.01.W1.071,461.00

F9.01.W1.081,461.00


Components







F9.01.W2.011,231.00

F9.01.W2.021,231.00

EPDM

Viton®

F9.01.W2.031,251.00

F9.01.W2.041,251.00

F9.01.W2.051,371.00

F9.01.W2.061,371.00

F9.01.W2.071,535.00

F9.01.W2.081,535.00

EPDM

Viton®


Packages








Outputs: 4 to 20 mA 3/4 wire plus 3 open collectorsLEDs: 3


316L SS

L1



EPDM

Viton®

L0

F9.01.091,413.00

F9.01.101,413.00

316L SS

L1

F9.01.111,445.00

F9.01.121,445.00



F3.00.H IP68F3.00.H IP65

Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring



EPDM

Viton®

EPDM

Viton®




Components







F9.01.P1.211,519.00

F9.01.P1.221,519.00

F9.01.W1.211,541.00

F9.01.W1.221,541.00

F9.01.W2.211,615.00

F9.01.W2.221,615.00

F9.01.P1.231,559.00

F9.01.P1.241,559.00

F9.01.W1.231,581.00

F9.01.W1.241,581.00

F9.01.W2.231,655.00

F9.01.W2.241,655.00

L0

F9.01.251,286.00

F9.01.261,286.00

Brass

L1

F9.01.271,434.00

F9.01.281,434.00

F9.01.P1.291,314.00

F9.01.P1.301,314.00

F9.01.W1.291,336.00

F9.01.W1.301,336.00

F9.01.W2.291,410.00

F9.01.W2.301,410.00

F9.01.P1.311,462.00

F9.01.P1.321,462.00

F9.01.W1.311,484.00

F9.01.W1.321,484.00

F9.01.W2.311,558.00

F9.01.W2.321,558.00

EPDM

Viton®


EPDM

Viton®


F9.01.P1.091,519.00

F9.01.P1.101,519.00

F9.01.W1.091,541.00

F9.01.W1.101,541.00

F9.01.P1.111,559.00

F9.01.P1.121,559.00


Components







EPDM

Viton®

F9.01.W2.091,615.00

F9.01.W2.101,615.00

F9.01.W2.111,655.00

F9.01.W2.121,655.00

F9.01.W1.111,581.00

F9.01.W1.121,581.00

L0

Brass

L1

F9.01.P1.251,314.00

F9.01.P1.261,314.00

F9.01.W1.251,336.00

F9.01.W1.261,336.00

F9.01.P1.271,462.00

F9.01.P1.281,462.00

F9.01.W2.251,410.00

F9.01.W2.261,410.00

F9.01.W2.271,558.00

F9.01.W2.281,558.00

F9.01.W1.271,484.00

F9.01.W1.281,484.00

EPDM

Viton®


New

New

Packages








Outputs: 4 to 20 mA 3/4 wire plus 1 open collectorand 2 SPDT relays

LEDs: 3

L0


PVDF

L1



L0

F9.02.011,117.00

F9.02.021,117.00

F9.02.P1.011,147.00

F9.02.P1.021,147.00


EPDM

Viton®

EPDM

Viton®


F9.02.W1.011,169.00

F9.02.W1.021,169.00

L1

F9.02.031,134.00

F9.02.041,134.00

F9.02.P1.031,167.00

F9.02.P1.041,167.00

F9.02.W1.031,189.00

F9.02.W1.041,189.00

L0

F9.02.051,236.00

F9.02.061,236.00

F9.02.P1.051,287.00

F9.02.P1.061,287.00

PVDF

F9.02.W1.051,309.00

F9.02.W1.061,309.00

L1

F9.02.071,420.00

F9.02.081,420.00

F9.02.P1.071,451.00

F9.02.P1.081,451.00

F9.02.W1.071,473.00

F9.02.W1.081,473.00


Components







F9.02.W2.011,243.00

F9.02.W2.021,243.00

EPDM

Viton®

F9.02.W2.031,263.00

F9.02.W2.041,263.00

F9.02.W2.051,383.00

F9.02.W2.061,383.00

F9.02.W2.071,547.00

F9.02.W2.081,547.00

EPDM

Viton®


Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring

F3.00.H IP68F3.00.H IP65



F9.02.P1.131,147.00

F9.02.P1.141,147.00

F9.02.W1.131,169.00

F9.02.W1.141,169.00

EPDM

Viton®

EPDM

Viton®




Components







F9.02.W2.131,243.00

F9.02.W2.141,243.00

F9.02.P1.151,167.00

F9.02.P1.161,167.00

F9.02.W1.151,189.00

F9.02.W1.161,189.00

F9.02.W2.151,263.00

F9.02.W2.161,263.00

F9.02.P1.171,287.00

F9.02.P1.181,287.00

F9.02.W1.171,309.00

F9.02.W1.181,309.00

F9.02.W2.171,383.00

F9.02.W2.181,383.00

F9.02.P1.191,451.00

F9.02.P1.201,451.00

F9.02.W1.191,473.00

F9.02.W1.201,473.00

F9.02.W2.191,547.00

F9.02.W2.201,547.00

EPDM

Viton®



Packages








Outputs: 4 to 20 mA 3/4 wire plus 1 open collectorand 2 SPDT relays

LEDs: 3


316L SS

L1




EPDM

Viton®

EPDM

Viton®


L0

F9.02.091,425.00

F9.02.101,425.00

F9.02.P1.091,531.00

F9.02.P1.101,531.00

316L SS

F9.02.W1.091,553.00

F9.02.W1.101,553.00

L1

F9.02.111,457.00

F9.02.121,457.00

F9.02.P1.111,571.00

F9.02.P1.121,57100


Components







EPDM

Viton®

F9.02.W2.091,627.00

F9.02.W2.101,627.00

F9.02.W2.111,667.00

F9.02.W2.121,667.00

F9.02.W1.111,593.00

F9.02.W1.121,593.00

L0

Brass

L1

F9.02.P1.251,326.00

F9.02.P1.261,326.00

F9.02.W1.251,348.00

F9.02.W1.261,348.00

F9.02.P1.271,474.00

F9.02.P1.281,474.00

F9.02.W2.251,422.00

F9.02.W2.261,422.00

F9.02.W2.271,570.00

F9.02.W2.281,570.00

F9.02.W1.271,496.00

F9.02.W1.281,496.00

EPDM

Viton®


Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring

F3.00.H IP68F3.00.H IP65



EPDM

Viton®

EPDM

Viton®




Components







F9.02.P1.211,531.00

F9.02.P1.221,531.00

F9.02.W1.211,553.00

F9.02.W1.221,553.00

F9.02.W2.211,627.00

F9.02.W2.221,627.00

F9.02.P1.231,571.00

F9.02.P1.241,571.00

F9.02.W1.231,593.00

F9.02.W1.241,593.00

F9.02.W2.231,667.00

F9.02.W2.241,667.00

L0

F9.02.251,298.00

F9.02.261,298.00

Brass

L1

F9.02.271,446.00

F9.02.281,446.00

F9.02.P1.291,326.00

F9.02.P1.301,326.00

F9.02.W1.291,348.00

F9.02.W1.301,348.00

F9.02.W2.291,422.00

F9.02.W2.301,422.00

F9.02.P1.311,474.00

F9.02.P1.321,474.00

F9.02.W1.311,496.00

F9.02.W1.321,496.00

F9.02.W2.311,570.00

F9.02.W2.321,570.00

EPDM

Viton®



New

New

Packages

F9.20 Battery Powered Flow MonitorPackagesF9.20 Battery Powered Flow Monitor packages come complete with:

1. F9.20 Flow Monitor. See page 5.2. Instrument Mounting Kit. See page 5.3. Flow Sensor F3.01.C or F3.00.C. See page 3.





Outputs: NoneLEDs: None

Direct Mount2 x 3.6 Volt

Battery

L0

F9.20.011,305.00

F9.20.021,305.00

CPVCConfiguration Voltage

EPDM

Viton®

L1

F9.20.031,322.00

F9.20.041,322.00

L0

F9.20.051,424.00

F9.20.061,424.00

PVDF

L1

F9.20.071,608.00

F9.20.081,608.00



L0

CPVCConfiguration Voltage L1 L0

PVDF

L1

Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring

F3.00.C IP68F3.00.C IP65

Panel Mount2 x 3.6 Volt

Battery

F9.20.P1.131,335.00

F9.20.P1.141,335.00

EPDM

Viton®

Wall Mount2 x 3.6 Volt

Battery


Sensor – F3.01.C.xx

Components





F9.20.W1.131,357.00

F9.20.W1.141,357.00

F9.20.P1.151,355.00

F9.20.P1.161,355.00

F9.20.W1.151,377.00

F9.20.W1.161,377.00

F9.20.P1.171,475.00

F9.20.P1.181,475.00

F9.20.W1.171,497.00

F9.20.W1.181,497.00

F9.20.P1.191,639.00

F9.20.P1.201,639.00

F9.20.W1.191,661.00

F9.20.W1.201,661.00

EPDM

Viton®


Battery

F9.20.P1.011,335.00

F9.20.P1.021,335.00

EPDM

Viton®


Battery

Components





F9.20.W1.011,357.00

F9.20.W1.021,357.00

F9.20.P1.031,355.00

F9.20.P1.041,355.00

F9.20.W1.031,377.00

F9.20.W1.041,377.00

F9.20.P1.051,475.00

F9.20.P1.061,475.00

F9.20.W1.051,497.00

F9.20.W1.061,497.00

F9.20.P1.071,639.00

F9.20.P1.081,639.00

F9.20.W1.071,661.00

F9.20.W1.081,661.00

EPDM

Viton®



Packages

F9.20 Battery Powered Flow MonitorPackagesF9.20 Battery Powered Flow Monitor packages come complete with:

1. F9.20 Flow Monitor. See page 5.2. Instrument Mounting Kit. See page 5.3. Flow Sensor F3.01.C or F3.00.C. See page 3.






Direct Mount2 x 3.6 Volt

Battery

Configuration Voltage

EPDM

Viton®

L0

F9.20.091,613.00

F9.20.101,613.00

316L SS

L1

F9.20.111,645.00

F9.20.121,645.00



Configuration Voltage L0

316L SS

L1

Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring

F3.00.C IP68F3.00.C IP65


Battery

EPDM

Viton®


Battery



Components





F9.20.P1.211,719.00

F9.20.P1.221,719.00

F9.20.W1.211,741.00

F9.20.W1.221,741.00

F9.20.P1.231,759.00

F9.20.P1.241,759.00

F9.20.W1.231,781.00

F9.20.W1.241,781.00

L0

F9.20.251,486.00

F9.20.261,486.00

Brass

L1

F9.20.271,634.00

F9.20.281,634.00

F9.20.P1.291,514.00

F9.20.P1.301,514.00

F9.20.W1.291,536.00

F9.20.W1.301,536.00

F9.20.P1.311,662.00

F9.20.P1.321,662.00

F9.20.W1.311,684.00

F9.20.W1.321,684.00

EPDM

Viton®


Battery

EPDM

Viton®


Battery

Components





F9.20.P1.091,719.00

F9.20.P1.101,719.00

F9.20.W1.091,741.00

F9.20.W1.101,741.00

F9.20.P1.111,759.00

F9.20.P1.121,759.00

F9.20.W1.111,781.00

F9.20.W1.121,781.00

L0

Brass

L1

F9.20.P1.251,514.00

F9.20.P1.261,514.00

F9.20.W1.251,536.00

F9.20.W1.261,536.00

F9.20.P1.271,662.00

F9.20.P1.281,662.00

F9.20.W1.271,684.00

F9.20.W1.281,684.00

EPDM

Viton®



New

New

Packages


F9.50 Batch Controller Packages F9.50 Batch Controller packages come complete with:

1. F9.50 Batch Controller. See page 5.2. Instrument Mounting Kit. See page 5.3. Flow Sensor F3.01.H or F3.00.H. See page 2.




Displays: Batch in Progress – 6 digitsFlow Rate – 5 digitsResettable Total – 6 digitsNon-Resettable Total – 10 digits

Outputs: 4 to 20 mA 3/4 wire 1 Open collector2 SPDT relays

LEDs: 3

L0


PVDF

L1



L0

F9.50.011,180.00

F9.50.021,180.00

F9.50.P1.011,210.00

F9.50.P1.021,210.00


EPDM

Viton®

EPDM

Viton®


F9.50.W1.011,232.00

F9.50.W1.021,232.00

L1

F9.50.031,197.00

F9.50.041,197.00

F9.50.P1.031,230.00

F9.50.P1.041,230.00

F9.50.W1.031,252.00

F9.50.W1.041,252.00

L0

F9.50.051,299.00

F9.50.061,299.00

F9.50.P1.051,350.00

F9.50.P1.061,350.00

PVDF

F9.50.W1.051,372.00

F9.50.W1.061,372.00

L1

F9.50.071,483.00

F9.50.081,483.00

F9.50.P1.071,514.00

F9.50.P1.081,514.00

F9.50.W1.071,536.00

F9.50.W1.081,536.00


Components







F9.50.W2.011,306.00

F9.50.W2.021,306.00

EPDM

Viton®

F9.50.W2.031,326.00

F9.50.W2.041,326.00

F9.50.W2.051,466.00

F9.50.W2.061,466.00

F9.50.W2.071,610.00

F9.50.W2.081,610.00

EPDM

Viton®


Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring

F3.00.H IP68F3.00.H IP65



F9.50.P1.131,210.00

F9.50.P1.141,210.00

F9.50.W1.131,232.00

F9.50.W1.141,232.00

EPDM

Viton®

EPDM

Viton®




Components







F9.50.W2.131,306.00

F9.50.W2.141,306.00

F9.50.P1.151,230.00

F9.50.P1.161,230.00

F9.50.W1.151,252.00

F9.50.W1.161,252.00

F9.50.W2.151,326.00

F9.50.W2.161,326.00

F9.50.P1.171,350.00

F9.50.P1.181,350.00

F9.50.W1.171,372.00

F9.50.W1.181,372.00

F9.50.W2.171,466.00

F9.50.W2.181,466.00

F9.50.P1.191,514.00

F9.50.P1.201,514.00

F9.50.W1.191,536.00

F9.50.W1.201,536.00

F9.50.W2.191,610.00

F9.50.W2.201,610.00

EPDM

Viton®



Packages


F9.50 Batch Controller Packages F9.50 Batch Controller packages come complete with:

1. F9.50 Batch Controller. See page 5.2. Instrument Mounting Kit. See page 5.3. Flow Sensor F3.01.H or F3.00.H. See page 2.






LEDs: 3


316L SS

L1




EPDM

Viton®

EPDM

Viton®


L0

F9.50.091,488.00

F9.50.101,488.00

F9.50.P1.091,594.00

F9.50.P1.101,594.00

316L SS

F9.50.W1.091,616.00

F9.50.W1.101,616.00

L1

F9.50.111,520.00

F9.50.121,520.00

F9.50.P1.111,634.00

F9.50.P1.121,634.00


Components







EPDM

Viton®

F9.50.W2.091,690.00

F9.50.W2.101,690.00

F9.50.W2.111,730.00

F9.50.W2.121,730.00

F9.50.W1.111,656.00

F9.50.W1.121,656.00

L0

Brass

L1

F9.50.P1.251,389.00

F9.50.P1.261,389.00

F9.50.W1.251,411.00

F9.50.W1.261,411.00

F9.50.P1.271,537.00

F9.50.P1.281,537.00

F9.50.W2.251,485.00

F9.50.W2.261,485.00

F9.50.W2.271,633.00

F9.50.W2.281,633.00

F9.50.W1.271,559.00

F9.50.W1.281,559.00

EPDM

Viton®


Sensor Length

Body

O-Ring

Sensor Length

Body

O-Ring

F3.00.H IP68F3.00.H IP65



EPDM

Viton®

EPDM

Viton®




Components







F9.50.P1.211,594.00

F9.50.P1.221,594.00

F9.50.W1.211,616.00

F9.50.W1.221,616.00

F9.50.W2.211,690.00

F9.50.W2.221,690.00

F9.50.P1.231,634.00

F9.50.P1.241,634.00

F9.50.W1.231,656.00

F9.50.W1.241,656.00

F9.50.W2.231,730.00

F9.50.W2.241,730.00

L0

F9.50.251,361.00

F9.50.261,361.00

Brass

L1

F9.50.271,509.00

F9.50.281,509.00

F9.50.P1.291,389.00

F9.50.P1.301,389.00

F9.50.W1.291,411.00

F9.50.W1.301,411.00

F9.50.W2.291,485.00

F9.50.W2.301,485.00

F9.50.P1.311,537.00

F9.50.P1.321,537.00

F9.50.W1.311,559.00

F9.50.W1.321,559.00

F9.50.W2.311,633.00

F9.50.W2.321,633.00

EPDM

Viton®



New

New

Packages

Panel Mount Instrument Wall Mount Instrument

ULF Sensor

ULF9.0x Monitor/Transmitter PackagesULF9.0x Monitor/Transmitter packages come complete with:

1. F9.00, F9.01 or F9.02 Flow Monitor and Transmitter. See page 5.2. Instrument Mounting Kit. See page 5.3. Ultra Low Flow Sensor ULF.H or ULF.R. See page 4.



Sensors have male threaded in-line connections,1/4" BSP.




Configuration Required Voltage Item No.

1.5 – 100 l/h

Price



Components Body / O-Rings


Sensor – ULF.R


Sensor – ULF.R



Sensor – ULF.R

Item No.

6 – 250 l/h

Price

ULF9.00 Outputs: 4 to 20 mA 2 wire, 1 open collector LEDs: 1

889.00

1,111.00

1,346.00

911.00

1,133.00

1,368.00

985.00

1,207.00

1,442.00

889.00

1,111.00

1,346.00

911.00

1,133.00

1,368.00

985.00

1,207.00

1,442.00

ULF9.00.P1.01.0

ULF9.00.P1.01.2

ULF9.00.P1.01.3

ULF9.00.W1.01.0

ULF9.00.W1.01.2

ULF9.00.W1.01.3

ULF9.00.W2.01.0

ULF9.00.W2.01.2

ULF9.00.W2.01.3

ULF9.00.P1.03.0

ULF9.00.P1.03.2

ULF9.00.P1.03.3

ULF9.00.W1.03.0

ULF9.00.W1.03.2

ULF9.00.W1.03.3

ULF9.00.W2.03.0

ULF9.00.W2.03.2

ULF9.00.W2.03.3


1.5 – 100 l/h

Price





Sensor – ULF.H


Sensor – ULF.H



Sensor – ULF.H

Item No.

6 – 250 l/h

Price

ULF9.01 Outputs: 4 to 20 mA 3/4 wire, 3 open collectors LEDs: 3

900.00

1,165.00

1,415.00

922.00

1,187.00

1,437.00

996.00

1,261.00

1,511.00

900.00

1,165.00

1,415.00

922.00

1,187.00

1,437.00

996.00

1,261.00

1,511.00

ULF9.01.P1.01.0

ULF9.01.P1.01.2

ULF9.01.P1.01.3

ULF9.01.W1.01.0

ULF9.01.W1.01.2

ULF9.01.W1.01.3

ULF9.01.W2.01.0

ULF9.01.W2.01.2

ULF9.01.W2.01.3

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

ULF9.01.P1.03.0

ULF9.01.P1.03.2

ULF9.01.P1.03.3

ULF9.01.W1.03.0

ULF9.01.W1.03.2

ULF9.01.W1.03.3

ULF9.01.W2.03.0

ULF9.01.W2.03.2

ULF9.01.W2.03.3


1.5 – 100 l/h

Price





Sensor – ULF.H


Sensor – ULF.H



Sensor – ULF.H

Item No.

6 – 250 l/h

Price

ULF9.02 Outputs: 4 to 20 mA 3/4 wire, 1 open collector and 2 SPDT relays LEDs: 3

912.00

1,177.00

1,427.00

934.00

1,199.00

1,449.00

1,008.00

1,273.00

1,523.00

912.00

1,177.00

1,427.00

934.00

1,199.00

1,449.00

1,008.00

1,273.00

1,523.00

ULF9.02.P1.01.0

ULF9.02.P1.01.2

ULF9.02.P1.01.3

ULF9.02.W1.01.0

ULF9.02.W1.01.2

ULF9.02.W1.01.3

ULF9.02.W2.01.0

ULF9.02.W2.01.2

ULF9.02.W2.01.3

ULF9.02.P1.03.0

ULF9.02.P1.03.2

ULF9.02.P1.03.3

ULF9.02.W1.03.0

ULF9.02.W1.03.2

ULF9.02.W1.03.3

ULF9.02.W2.03.0

ULF9.02.W2.03.2

ULF9.02.W2.03.3

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

Packages

ULF9.50 Batch Controller PackagesULF9.50 Batch Controller packages come complete with:

1. F9.50 Batch Controller. See page 5.2. Instrument Mounting Kit. See page 5.3. Ultra Low Flow Sensor ULF.H. See page 4.






ULF9.20 Battery Powered FlowMonitor PackagesULF9.20 Battery Powered Flow Monitor packages come complete with:

1. F9.20 Battery Powered Flow Monitor. See page 5.2. Instrument Mounting Kit. See page 5.3. Ultra Low Flow Sensor ULF.R. See page 4.





ULF Sensor


ULF Sensor


LEDs: 3


Configuration Voltage Item No.

1.5 – 100 l/h

Price


Battery


Battery



Sensor – ULF.R


Sensor – ULF.R

Item No.

6 – 250 l/h

Price

ULF9.20



1.5 – 100 l/h

Price





Sensor – ULF.H


Sensor – ULF.H



Sensor – ULF.H

Item No.

6 – 250 l/h

Price

ULF9.50


975.00

1,240.00

1,490.00

997.00

1,262.00

1,512.00

1,071.00

1,336.00

1,586.00

975.00

1,240.00

1,490.00

997.00

1,262.00

1,512.00

1,071.00

1,336.00

1,586.00

ULF9.50.P1.01.0

ULF9.50.P1.01.2

ULF9.50.P1.01.3

ULF9.50.W1.01.0

ULF9.50.W1.01.2

ULF9.50.W1.01.3

ULF9.50.W2.01.0

ULF9.50.W2.01.2

ULF9.50.W2.01.3

ULF9.50.P1.03.0

ULF9.50.P1.03.2

ULF9.50.P1.03.3

ULF9.50.W1.03.0

ULF9.50.W1.03.2

ULF9.50.W1.03.3

ULF9.50.W2.03.0

ULF9.50.W2.03.2

ULF9.50.W2.03.3

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

POM† / Viton®

ECTFE* / Viton®

ECTFE* / Kalrez®

ULF9.20.P1.01.0

ULF9.20.P1.01.2

ULF9.20.P1.01.3

ULF9.20.W1.01.0

ULF9.20.W1.01.2

ULF9.20.W1.01.3

1,117.00

1,339.00

1,574.00

1,139.00

1,361.00

1,596.00

1,117.00

1,339.00

1,574.00

1,139.00

1,361.00

1,596.00

ULF9.20.P1.03.0

ULF9.20.P1.03.2

ULF9.20.P1.03.3

ULF9.20.W1.03.0

ULF9.20.W1.03.2

ULF9.20.W1.03.3

Installation Fittings

PriceItem No.SensorLength

MaterialsSaddle Insert Seal

PipeSize

TeesStandard elastomer seals are EPDM or Viton®. Other materials are available. PVC ends are ANSI socket. PP tees are female NPT and PVDFtees have DIN socket ends. Other materials are available including PP and PVDF with butt fusion ends (B). CPVC Tees are available.

2" L0 CPVC CPVC EPDM SACC020E 136.002-1/2" L0 CPVC CPVC EPDM SACC025E 178.00

3" L0 CPVC CPVC EPDM SACC030E 178.004" L0 CPVC CPVC EPDM SACC040E 194.005" L1 CPVC CPVC EPDM SACC050E 215.006" L1 CPVC CPVC EPDM SACC060E 270.008" L1 CPVC CPVC EPDM SACC080E 279.0010" L1 PP CPVC Nitrile SABC100N 336.0012" L1 PP CPVC Nitrile SABC120N 336.00

Bolt-On Saddles

Installation Fittings for Paddle Wheel Sensors

Materials – Body / O-Rings / End Connections

PVC / EPDM / Socket PP / EPDM / Threaded PVDF / Viton® / Socket WeldPrice

106.00

106.00

133.00

133.00

148.00

Item No.

TEA005ES

TEA007ES

TEA010ES

TEA012ES

TEA015ES

SensorLength

L0

L0

L0

L0

L0

Item No.

TEB005ET

TEB007ET

TEB010ET

TEB012ET

TEB015ET

Size

1/2"

3/4"

1"

1-1/4"

1-1/2"

Item No.

TEK005VS

TEK007VS

TEK010VS

TEK012VS

TEK015VS

Price

194.00

194.00

206.00

206.00

233.00

Price

125.00

125.00

161.00

161.00

183.00

Viton® seals are available for the same price. Substitute V instead of E in the Item Number. PVDF inserts are also available. P.O.A.

Sensors with Viton® or EPDM seals are the same price. Substitute V instead of E in the Item Number. PVC and PP are standard with EPDM,PVDF with Viton®.

Tee Bolt-On Saddle

Metal Strap-On Saddles All saddles are cast iron and stainless steel body with Nitrile o-ring.

PriceMin. Max. Pipe O.D. Range Pipe O.D. Range

Item No.SensorLength

SensorLength

PipeSize

PipeSize

3" L0 3.5" 4.1" MSS030N 190.004" L0 4.4" 5.0" MSS040N 195.005" L0 5.5" 6.1" MSS050N 250.006" L0 6.6" 7.2" MSS060N 265.008" L1 8.6" 9.6" MSS080N 276.00

PriceMin. Max. Item No.

10" L1 10.7" 11.6" MSS100N 293.0012" L1 12.7" 13.9" MSS120N 311.0014" L1 14.0" 16.3" MSS140N 337.0016" L1 16.0" 18.6" MSS160N 382.0018" L1 18.0" 21.0" MSS180N 465.00

Wafer Fittings Standard elastomer seals are EPDM or Viton®. Bodies are either PVC or PPG (glass reinforced polypropylene).

Item No.Seals

Materials – Body

PVC PPGPipeSize

SensorLength

L010"

12" L0

Price Item No. Price

Wafer FittingMetal Strap-On Saddle

EPDMViton®

EPDMViton®

WFA100EWFA100VWFA120EWFA120V

478.001,411.00

546.001,712.00

WFB100EWFB100VWFB120EWFB120V

560.001,492.00

667.001,831.00



PlugsPlugs are used to cap off installation tees or saddles after a sensor isremoved for relocation, repair or pipeline maintenance.

94.0094.00

156.00

Item No.PLUGAEPLUGBEPLUGKV

PriceBody / O-RingsPVC / EPDMPP / EPDM

PVDF / Viton®

316L SS Threaded TeesWith BSP female threaded connections.

Price

298.00

298.00

323.00

Item No.

TES007T–BSP

TES010T–BSP

TES012T–BSP

Sensor Length

L0

L0

L0

Size

3/4"

1"

1-1/4"

Installation Fittings for Paddle Wheel Sensors

Hot-Tap SS Weld-On Adaptor

316L SS Threaded Tee

Weld-On Adaptors

Item No. PricePipe Size Sensor Length Material

Other Plastic Weld-On Adaptors are available in any material to match the piping. Consult Chemline.

Hot-Tap Weld-On Adaptors for SS Sensors / Brass Installation Valve

16" Minimum 316L Stainless Steel 2" BSP Connections WAIXHT 159.002" Brass Installation Valve Brass F1.SP3 119.00with BSP Connections

Item No. PricePipe Size Material

Hot-Tap Strap-On Saddle

Installation Fittings for F111 Hot-Tap SensorsHot-Tap Metal Strap-On Saddles for SS SensorsAll saddles are cast iron and stainless steel body with Nitrileo-ring, complete with 2" brass valve with female BSP Connection.

PriceMin. Max. Item No.Pipe O.D. Range Pipe O.D. RangePipe

SizePipeSize

2" 2.4" 2.7" MSS020N–HT * 190.003" 3.5" 4.1" MSS030N–HT 190.004" 4.4" 5.0" MSS040N–HT 195.005" 5.5" 6.1" MSS050N–HT 250.006" 6.6" 7.2" MSS060N–HT 265.008" 8.6" 9.6" MSS080N–HT 276.00

PriceMin. Max. Item No.

10" 10.7" 11.6" MSS100N–HT 293.0012" 12.7" 13.9" MSS120N–HT 311.0014" 14.0" 16.3" MSS140N–HT 337.0016" 16.0" 18.6" MSS160N–HT 382.0018" 18.0" 21.0" MSS180N–HT 465.00

Weld-On Adaptor

1-1/2" – 8" L0 316L Stainless Steel WOSS–L0 159.00PE WOPE–L0 54.60

10" – 24" L1 316L Stainless Steel WOSS–L1 180.00PE WOPE–L1 117.00


* For Brass Hot-Tap Sensors only.

Type F3.60– Electromagnetic Flow TransmitterOutput signal is 4 to 20 mA 3/4 wire. Parts in contact with liquidare sensor body, and Hastelloy C electrodes. The signal is normallyfed to a F9.01, F9.02, F9.03 or F9.50 Instrument. See page 5.

Item No.Power SupplyPipe Material PriceSensor Body / SealPipe Size

PriceSeals†† Item No.SaddleCPVC Insert PVDF Insert

Materials

PipeSize

Bolt-On Saddles for Type F3.60 Flow TransmittersAll saddles are CPVC with CPVC or PVDF inserts.

Weld-On Adaptors for Type F3.60 Flow Transmitters

PriceItem No.3" CPVC EPDM SACC030E–M 258.00 SACK030E–M 309.004" CPVC EPDM SACC040E–M 267.00 SACK040E–M 323.005" CPVC EPDM SACC050E–M 304.00 SACK050E–M 330.006" CPVC EPDM SACC060E–M 309.00 SACK060E–M 387.008" CPVC EPDM SACC080E–M 340.00 SACK080E–M 422.00

Flow UnitsConversion Chart

† Values based on water at 20ºC.

m3/hr

litres/hr

USGPM

ImpGPM

ft3/min

lbs/min†

kgs/min†

FromTo

m3/hr

1

0.001

0.2271

0.2728

1.6990

0.0272

.06

litres/hr

1000

1

227.12

272.77

1699

27.2156

60

USGPM

4.4029

.004403

1

1.2009

7.4806

0.1198

0.2642

ImpGPM

3.6662

.003666

0.8327

1

6.2289

0.0998

.2200

ft3/min

0.5886

.000589

0.1337

0.1605

1

0.0160

.0353

lbs/min†

36.7437

0.0367

8.3454

10.0224

62.4282

1

2.2046

kgs/min†

16.6667

0.0167

3.7854

4.5461

28.3170

0.4536

1

2"– 16" Metal or Plastic SS – PVDF / EPDM 230 VAC F3.60M.01 2,844.002"– 16" Metal or Plastic SS – PVDF / EPDM 110 VAC F3.60M.02 2,844.002"– 16" Metal or Plastic SS – PVDF / EPDM 24 VAC F3.60M.05 2,844.00

F3.60

Electromagnetic

Bolt-On Saddle


Item No.Material PricePipe Size

2"– 16" 316 SS WAIX360 234.00

Weld-On Adaptor Tee

Installation Tees for Type F3.60 Flow Transmitters, TU SocketItem No.Material PricePipe Size

2" PVC TEA020–M 312.002-1/2" PVC TEA025–M P.O.A.

Flow MeterSelection Questionnaire

Questionnaire

Reference Notes

1. Digiflow® FlowX3 flow meters measure liquids only. No air bubbles should be present and the pipe must always be full.

2. Check chemical resistance of the fluid to verify if wetted parts are acceptable.

3. Check that the service is within the pressure/temperature rating of installation fitting.

4. Viscosity range is 0.5 to 20 cSt (centistokes). Factor calibrationis required if outside this range, up to 40 cSt maximum. Maximum viscosity for Oval Gear flow sensor is 1,000 cP. Insertion electromagnetic flow transmitters have no viscositylimitations. See Units of Viscosity below.

5. Maximum percentage solids content for paddle wheel sensors is 10%, with particles not to exceed 0.5 mm in length or diameter (0% solids for ULF flow sensors). The insertion typeelectromagnetic flow transmitters can handle homogeneoussolids easily. Particle size is not an issue.

6. Paddle wheel flow meters cannot be used on services containing ferrous particles i.e., those which will be attracted to the magnetic rotor blades. The insertion type electromagnetic flow transmitters is only sensitive to metallicparticles if they are magnetic.

7. Electromagnetic flow transmitters require liquid to haveminimum conductivity at 20 microSiemens.

8. For accurate flow measurement there must be a developedturbulent velocity profile at the sensor location. This requires astraight run pipe with a minimum number of pipe diametersdistance upstream and downstream of the flow sensor. Thesedistances depend on the type of piping element (i.e. valves, elbows, reducers etc.) causing the disturbance. See page 36.

9. Hall Effect signals may be transmitted up to 300 meters(984 ft.) without the need for conditioning whereas Coil orReed Effect signals may be transmitted up to 16 m (52.5 ft.) without conditioning. Coil Effect sensors are normally used with the battery powered flow monitor.

Units of ViscosityAbsolute Viscosity (m): 1 poise (P) = 1 dyne = 1 gm

cm2 cm ● sec.1 centipoise (cP) = 0.01 poiseViscosity of water at 20oC is 1.002 cP

Kinematic Viscosity (n) = Absolute ViscosityDensity of Fluid

1 stoke (St) = 1 m2

sec.1 centistoke (cSt) = 0.01 stoke

Viscosity is temperature dependent. Liquid viscosities drop withincreased temperature.

Concentration:

Viscosity:

Fluid:

Temperature: oC

psi

cSt

%

Units:/

mm dia.

%

(Notes 1, 2)

(Note 2)

(Notes 2, 3)

(Note 3)

(Note 4)

(Note 5)

(Note 5)

(Note 6)

(Note 7)

Pressure:

Ferrous Particles in Fluid?:

Electromagnetic flow meters only:conductivity of fluid greaterthan 20 microSiemens?:

Particle Size:

❏ Yes ❏ No

❏ Yes ❏ No

Maximum Solids:

Maximum/minimum measured flow rate:

Pipe Size:

Sensor Body: ❏ CPVC ❏ 316L SS❏ PVDF ❏ Brass

Sensor O-Rings: ❏ EPDM ❏ Viton®

❏ Other

Installation Fittings: ❏ Tee ❏ Saddle❏ Weld-On Adaptor

Power Supply Available:

Distance of straight pipe upstream/downstream

of flow sensor: /

Type of piping element upstream/downstreamof flow sensor (i.e. valve, elbow, reducer, etc.):

/

Maximum distance from flow sensor to remote

instrument:

Pipe Material:

(Note 8)

(Note 9)

(Note 8)


Instruments

Flow Sensors


Type F3.00Remote NEMA 6Flow Sensors

Type F3.00Remote NEMA 4Flow Sensors

Type F3.01Direct MountNEMA 6Flow Sensors

ULF.H and ULF.RUltra Low FlowSensors

Type F3.30 Blind Transmitters

Type ULF3.30 Ultra Low FlowBlind Transmitters

Type F3.15AdjustableFlow Switches

Type ULF3.15Adjustable UltraLow Flow Switches

• Tees

• Bolt-On Saddles

• Metal Strap-On Saddles

• Wafer Fittings

• Weld-On Adaptors

• Plugs

Type F3.60ElectromagneticFlow Transmitters

Type F9.00, F9.01, F9.02 & F9.03Flow Monitor/Transmitters

Type F9.50Batch Controller

Type F9.20Battery Powered Flow Monitor

Type F3.05No-FlowSwitches

Product Line

Price List USF05-1 24

55 Guardsman Road, Thornhill, Ontario, Canada, L3T 6L2Tel: 905-889-7890 [email protected]: 905-889-8553 www.chemline.com

Your Pipeline To Quality Valves, Piping, Flow Meters and Controls

Type F111Hot Tap FlowSensors

Documents

Paddle Wheel Flow Meters and Instruments -02-0… · Orders $200.00 to $500.00 Net ... † POM = "Polyoxymethylene". * ECTFE is also referred to as "Halar ® ". † POM = "Polyoxymethylene"