28
PAKET ARITMA SİSTEMLERİ & PACKAGE TREATMENT SYSTEMS

PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

  • Upload
    others

  • View
    13

  • Download
    0

Embed Size (px)

Citation preview

Page 1: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

PAKET ARITMA

SİSTEMLERİ&

PACKAGE TREATMENTSYSTEMS

Page 2: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

2

Page 3: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

1

içindekiler / index

Kimyasal Paket Arıtma Sistemleri / Chemical Package Treatment ............................ 2-7AKR Biyolojik Paket Arıtma Sistemleri / SBR Biological Package Treatment Systems .............................................................................. 8-13Sürekli Sistem Biyolojik Paket Arıtma / Continuous System Biological Package Treatment Systems ....................................... 14-19DAF Sistemleri / DAF Systems ............................................................................................................20-25

Page 4: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

2

KİMYASAL PAKET ARITMA SİSTEMLERİGENEL TANITIM VE KULLANIM AMACIEndüstri kuruluşlarının üretim proseslerinde gerçekleştirdikleri

faaliyetler sonucu oluşan atıksular genellikle biyolojik olarak parçalanamayan kirlilikler içerir. Endüstriyel kuruluşlardan kaynaklanan değişik karakterdeki atıksuların arıtımı için biyolojik arıtmanın yeterli olmadığı veya atıksuyun toksisite ihtivasından dolayı biyolojik arıtmanın tek başına kullanılamadığı durumlarda kimyasal arıtma ihtiyacı doğar.

Kimyasal atıksu arıtma sistemleri genellikle hızlı / yavaş karıştırma tankları ve karıştırıcıları, çöktürme tankı, kimyasal çözelti hazırlama ve dozlama üniteleri, elektrik otomasyon sistemleri, çıkış savağı gibi ekipmanlardan oluşur.

EKİPMANIN ÇALIŞMA PRENSİBİ

• Sürekli tip kimyasal paket arıtma sistemleri yüksek kapasitelerde tercih edilir. Paket arıtma sistemi pıhtılaştırma, yumaklaştırma ve çöktürme kısımlarından oluşur. Bu sistemde sürekli su girişi ve arıtılmış su çıkışı vardır. Kimyasallar da yine pH kontrolünde dozlanır.

• Kesikli tip kimyasal paket arıtma sistemleri düşük kapasitelerde tercih edilir. pıhtılaştırma, yumaklaştırma ve çöktürme işlemleri aynı tank içerisinde sırasıyla gerçekleştirilir. Kimyasal reaktör tankı günlük oluşan atıksuyun tümünü alabilen hacme sahiptir.

Kimyasal arıtma, suda çözünmüş veya askıda katı maddelerin yük dengesini bozarak çökmelerini sağlayan arıtma yöntemidir. Kimyasal arıtma işleminde, uygun pH değerindeki atıksuya kimyasal maddeler (koagülant, flokülant, polielektrolit vb.) ilave edilerek, kirletici maddeler çamur olarak çöktürülür ve sudan ayrılır. Genellikle kimyasal paket arıtma, koagülasyon, flokülasyon ve çöktürme gibi tüm aşamaları içeren kompakt bir ünitedir.

Kimyasal paket arıtma, kapasitelerine göre kesikli veya sürekli olarak tasarlanır.

Page 5: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

3

CHEMICAL PACKAGE TREATMENTGENERAL DESCRIPTION AND INTENDED USEThe wastewater occurred due to activities of the industrial companies

in their production processes generally contains non-biodegradable pollutants. For treatment of wastewater industrial companies having various characteristics, the chemical treatment is required when the biological treatment is not sufficient or when the biological treatment cannot be used singly due to toxicity content of the wastewater.

Generally, chemical wastewater treatment systems consist of fast / slow mixing tanks and mixers, sediment tank, chemical solution preparation and dosing units, electrical automation systems, weir etc.

WORKING PRINCIPLE OF EQUIPMENTThe chemical treatment is a treatment method which ensures sinking

of the materials solved in water or solid materials suspended by breaking their load balance. The chemical substances (coagulants, flocculants, polyelectrolytes etc.) are added into the wastewater in suitable pH value and the pollutants are settled as sludge and separated from the water. Generally, the chemical package treatment is a compact unit containing all steps such as coagulation, flocculation and sedimentation etc.

The chemical package treatment is designed interrupted or continuous according to their capacities.

• The continuous type chemical package treatment systems are preferred in high capacities. The package treatment system consists of coagulation, flocculation and sedimentation parts. In this system, there is a continuous water entry and treated water exit. The chemicals are also dosed under pH control.

• The interrupted chemical package treatment systems are preferred in low capacities. The coagulation, flocculation and sedimentation processes are carried out in the same tank respectively. The chemical reactor tank has a volume which can take all wastewater daily.

Page 6: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

4

• Project Based Special Design Possibility,

• Automation Operation,

• Compact Design,

• Easy Transportation and Mounting / Demounting,

• Long Operation Life,

• Possibility to Control and Follow the System Operation Over SCADA,

• Resistant Heavy-Duty Design,

• Easy Maintenance Possibility,

• Suitable for Outdoor Operation,

• Low Operation and Maintenance Costs.

ADVANTAGES

• Proje Bazlı Özel Tasarım İmkânı,

• Otomatik Çalışma,• Kompakt Tasarım,• Kolay Nakliye ve Montaj /

Demontaj,• Uzun İşletme Ömrü,• Sistemin Çalışmasını SCADA

Üzerinden Kontrol ve Takip Etme İmkânı,

• Mukavemetli Ağır Hizmet Tipi Tasarım,

• Kolay Bakım İmkânı,• Dış Ortamda Çalışmaya

Uygun,• Düşük İşletme ve Bakım

Maliyeti.

AVANTAJLARI

Page 7: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

5

No Parça Adı / Part Name

1Atıksu Besleme Borusu /

Wastewater Feeding Pipe

2Hızlı Karıştırma

1. Bölümü / Fast Mixing 1st Part

3Hızlı Karıştırma

2. Bölümü / Fast Mixing 2nd Part

4

Müdahale ve Bakım Platformu /

Intervention and Maintenance Platform

5Yavaş Karıştırma

Bölümü / Slow Mixing Part

6Çıkış Borusu /

Outlet Pipe

7

Çöktürme Deşarj Boruları /

Sedimentation Discharge Pipe

8

Çamur Çıkış Bağlantısı /

Sludge Outlet Connection

9

Kimyasal Çöktürme Bağlantısı / Chemical

Sedimentation Connection

Page 8: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

6

No Parça Adı / Part Name

1 Karıştırıcı / Mixer

2

Çamur Çıkış Branşmanı / Sludge Outlet

Branch

Page 9: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

7

Page 10: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

8

AKR BİYOLOJİK PAKET ARITMA SİSTEMLERİ

Endüstri kuruluşlarının üretim proseslerinde gerçekleştirdikleri faaliyetler sonucu oluşan atıksular veya evsel amaçlı kullanımdan kaynaklanan genellikle inorganik kirlilik derecesi ve toksisitesi olmayan atıksular biyolojik arıtma ile arıtılabilirler.

Biyolojik arıtma sistemlerinin tasarımında; atıksu debisi, arıtma prosesi, yatırım ve işletim maliyetleri göz önünde bulundurulur. Bu nedenle tasarım aşamasında tesisin betonarme veya paket olacağına karar verilir.

Biyolojik arıtma, atıksu içerisindeki çözünmüş organik maddelerin bakteriler yardımıyla oksijen kullanılarak giderilmesi işlemidir. Evsel atıksu arıtımında organik madde içeriğinin yanı sıra azot ve fosfor gibi besi maddeleri de biyolojik arıtımda giderilir.

Arıtılmış su, dezenfeksiyon sisteminden geçirilerek alıcı ortama verilir ya da müşterilerin isteği doğrultusunda, istenilen şartlar sağlandıktan sonra hidrofor sistemi yardımıyla bahçe sulamada kullanılır.

Ardışık kesikli reaktör tip biyolojik paket arıtma sistemleri; genellikle pompalar, blowerlar, difüzörler, dozaj sistemleri ve elektrik otomasyon sisteminden oluşur.

Sistemde kullanılan ekipmanlar, tanka akuple olarak üretilen işletme binasına monte edilir.

Kullanım Alanları;

• Fabrikalar ve endüstri kuruluşları,

• Oteller ve kamplar,

• Yazlık siteler ve turistik tesisler,

• Okullar ve kooperatifler,

• Askeri tesisler,

• Şantiyeler ve alt yapısı olmayan yerleşim merkezleri,

• Köy, belde ve belediyeler,

• Geçici yerleşim yerleri,

• Konaklama tesisleri.

GENEL TANITIM VE KULLANIM AMACI

Page 11: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

9

SBR BIOLOGICAL PACKAGE TREATMENT SYSTEMS

The wastewater occurred as a result of the activities of the industrial companies in the production processes or the wastewater arising out of domestic use which has no inorganic pollutants and toxicity can be treated via biological treatment.

The wastewater flow rate, treatment process, investment and operation costs are considered in the designs of biological treatment design. For this reason, it is decided whether the facility will be reinforced concrete or package during designing stage.

The biological treatment is a process which removes solved organic materials in the wastewater with the help of bacteria by using oxygen. The food substances such as nitrogen and phosphorus as well as organic substances in domestic wastewater treatment are removed in biological treatment.

The treated water is sent to the receiving body by passing through disinfection system or it is used for irrigation via a water booster after the required conditions are met in accordance with the request of the customer.

The sequencing batch reactor type biological treatment systems consist of pumps, blowers, diffusers, dosing systems and electrical automation system.

The equipment used in the system is mounted to the operation building coupled to the tank.

Areas of Usage;

• Factories and industrial companies,

• Hotels and camps,

• Summer sites and touristic facilities,

• Schools and cooperatives,

• Military facilities,

• Sites and settlement centers with no infrastructure,

• Village, districts and municipalities,

• Temporary settlement places,

• Accommodation facilities.

GENERAL DESCRIPTION AND INTENDED USE

Page 12: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

10

Ekipmanın Çalışma PrensibiBiyolojik reaktör tankında bulunan aktif çamur ile biyolojik arıtıma gerçekleşir.

Aktif çamur; organik ve inorganik maddeler ile hem canlı hem de ölü mikroorganizmaların karışımıdır. Aktif çamur sürecinde mikroorganizmalar organik maddeyi oksijen kullanarak ayrıştırır. Organik madde, mikrobiyal büyüme için hem karbon hem de enerji kaynağı olarak görev alır ve yeni hücrelerin sentezinde kullanır. Ayrışma ürünleri olarak karbondioksit ve su oluşur.

Aktif çamurun ihtiyacı olan oksijen, biyolojik reaktör tankı tabanına döşenen difüzörler vasıtasıyla blower tarafından üretilen hava ile sisteme verilir. Bu havalandırma difüzörlerin uygun yerleştirilmesi ile aynı zamanda aktif çamurun çökelmemesi için gerekli tam karışımı da sağlar. Biyolojik reaktör tankında yeterli havalandırma süresinin sonunda blowerın kapatılması ile biyolojik reaktör tankı çöktürme tankı görevi görür. Çökme süresi sonunda arıtılan su, deşarj vanası (gerekmesi durumunda deşarj pompası ile) yardımıyla alıcı ortama verilir.

Arıtılan suya deşarj esnasında dozaj pompası vasıtası ile klor (hipoklorit) ilave edilerek atıksu içinde oluşabilecek mikrobiyolojik faaliyetler engellenir.

Uzun periyotlarda birikerek deşarj vanası seviyesine gelen stabilize çamur, ilgili yasal mevzuatlar çerçevesinde bertaraf edilir.

Arıtma sürecinin sonunda, sistem başa dönerek aynı arıtma işlemleri tekrar edilir.

Page 13: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

11

Working Principle Of EquipmentThe biological treatment is performed with the activated sludge in the biological

reactor tank. Activated sludge is the mixture of organic and inorganic substances and alive and dead microorganisms. During activated sludge process, the microorganisms degrade the organic substance by using oxygen. The organic substance is both used in carbon and energy source in microbial growth and in synthesis of new cells. The degraded products are carbon dioxide and water.

The oxygen which is required by the activated sludge is given to the system with the air produced by the blower via diffusers installed at the bottom of the biologic reactor tank. This aeration ensures the suitable installation of the diffusers and it also provides the mixture required for the activated sludge not to settle. After the blower is closed at the end of the sufficient aeration period in the biological reactor tank, the biological reactor tank is used as the sedimentation tank. At the end of the sedimentation period, the treated water is sent to the receiving body with the help of discharge valve (with discharge pump if necessary).

The chlorine (hypoclorite) is added in the treatment water by the dosing pump during discharging and the microbiologic activities which may occur in the wastewater are prevented.

The stabilized sludge accumulated up to discharge valve in long periods is destroyed in accordance with the relevant legal legislations.

At the end of the treatment process, the system restarts and the same treatment processes are repeated.

Page 14: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

12

No Parça Adı / Part Name

1

AKR Bölümü (Havalandırma - Çöktürme) /

SBR Section (Aeration - Sedimentation)

2Paket Arıtma Çatısı /

Package Treatment Roof

3 Kapaklar / Covers

4 Merdiven / Stairs

5İşletme Odası /

Operation Room

• Proje Bazlı Özel Tasarım İmkânı,

• Kompakt Tasarım,

• Kolay Nakliye ve Montaj / Demontaj,

• Uzun İşletme Ömrü,

• Sistemin Çalışmasını SCADA Üzerinden Kontrol ve Takip Etme İmkânı,

• Atıksu Arıtma Tesisi İçin Ayrılan Alan Gereksiniminin En Aza İndirilmesi,

• Kurulacağı Yere Göre Estetik Uyum İçinde Olması,

• Paket Tesislerin Personel,

• İstihdamına Gerek Kalmadan Tam Otomatik Çalışması,

• Kolay İşletme ve Bakım,

• Düşük İşletme ve Bakım Maliyeti,

• Kokusuz ve Gürültüsüz Çalışma,

• Dış Ortamda Çalışmaya Uygun.

• Project Based Special Design Possibility,

• Compact Design,

• Easy Transportation and Mounting / Demounting,

• Long Operation Life,

• Possibility to Control and Follow the System Operation Over SCADA,

• Minimizing the Field Requirement Reserved for Wastewater Treatment Facility,

• Aesthetic Consistency in the Installation Field,

• Full Automatic Operation of Package Facilities Without Personnel,

• Easy Operation and Maintenance,

• Low Operation and Maintenance Costs,

• Odor and Noise-Free Operation,

• Suitable for Outdoor Operation.

Avantajları Advantages

Page 15: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

13

Page 16: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

14

SÜREKLİ SİSTEMBİYOLOJİK PAKET ARITMA

Endüstri kuruluşlarının üretim proseslerinde gerçekleştirdikleri faaliyetler sonucu oluşan atıksular veya evsel amaçlı kullanımdan kaynaklanan genellikle inorganik kirlilik derecesi ve toksisitesi olmayan atıksular biyolojik arıtma ile arıtılabilirler.

Biyolojik arıtma sistemlerinin tasarımında; atıksu debisi, arıtma prosesi, yatırım ve işletim maliyetleri göz önünde bulundurulur. Bu nedenle tasarım aşamasında tesisin betonarme veya paket olacağına karar verilir.

Biyolojik arıtma, atıksu içerisindeki çözünmüş organik maddelerin bakteriler yardımıyla ayrıştırılarak giderilmesi işlemidir. Evsel atıksu arıtımında organik madde içeriğinin yanı sıra azot ve fosfor gibi besi maddeleri de biyolojik arıtımda giderilir.

Arıtılmış su, dezenfeksiyon sisteminden geçirilerek alıcı ortama verilir ya da müşterilerin isteği doğrultusunda, istenilen şartlar sağlandıktan sonra hidrofor sistemi yardımıyla bahçe sulamada kullanılır.

Sürekli sistem tip biyolojik paket arıtma sistemleri; genellikle pompalar, blowerlar, difüzörler, dozaj sistemleri ve elektrik otomasyon sisteminden oluşur.

Sistemde kullanılan ekipmanlar, tanka akuple olarak üretilen işletme binasına monte edilir.

Sürekli sistemin AKR sistemden farkı, 24 saat boyunca atıksu beslemesine imkân sağlamasıdır. Havalandırılan atıksu ayrı bir çöktürme tankına alınarak proses sürekli hale getirilir.

GENEL TANITIM VE KULLANIM AMACI

Kullanım Alanları;

• Fabrikalar ve endüstri kuruluşları,

• Oteller ve kamplar,

• Yazlık siteler ve turistik tesisler,

• Okullar ve kooperatifler,

• Askeri tesisler,

• Şantiyeler ve alt yapısı olmayan yerleşim merkezleri,

• Köy, belde ve belediyeler,

• Geçici yerleşim yerleri,

• Konaklama tesisleri.

Page 17: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

15

CONTINUOUS SYSTEM BIOLOGICAL PACKAGE TREATMENT SYSTEMS

GENERAL DESCRIPTION AND INTENDED USEThe wastewater occurred as a result of the

activities of the industrial companies in the production processes or the wastewater arising out of domestic use which has no inorganic pollutants and toxicity can be treated via biological treatment.

The wastewater flow rate, treatment process, investment and operation costs are considered in the designs of biological treatment design. For this reason, it is decided whether the facility will be reinforced concrete or package during designing stage.

The biological treatment is a process which removes solved organic materials in the wastewater with the help of bacteria by degrading. The food substances such as nitrogen and phosphorus as well as organic substances in domestic wastewater treatment are removed in biological treatment.

The treated water is sent to the receiving body by passing through disinfection system or it is used for irrigation via a water booster after the required conditions are met in accordance with the request of the customer.

The continuous system biological treatment systems; consist generally pumps, blowers, diffusers, dosing systems and electrical automation system.

The equipment used in the system is mounted to the operation building coupled to the tank.

The difference of the continuous system from SBR system is that the continuous system allows to feed wastewater for 24 hours. The ventilated wastewater is taken to a separate sedimentation tank and the process becomes continuous.

Areas of Usage;

• Factories and industrial companies,

• Hotels and camps,

• Summer sites and touristic facilities,

• Schools and cooperatives,

• Military facilities,

• Sites and settlement centers with no infrastructure,

• Village, districts and municipalities,

• Temporary settlement places,

• Accommodation facilities.

Page 18: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

16

EKİPMANIN ÇALIŞMA PRENSİBİ

Biyolojik havalandırma tankında bulunan aktif çamur ile biyolojik arıtıma gerçekleşir. Aktif çamur; organik ve inorganik maddeler ile hem canlı hem de ölü mikroorganizmaların karışımıdır. Aktif çamur sürecinde mikroorganizmalar organik maddeyi oksijen kullanarak ayrıştırır. Organik madde, mikrobiyal büyüme için hem karbon hem de enerji kaynağı olarak görev alır ve yeni hücrelerin sentezinde kullanır. Ayrışma ürünleri olarak karbondioksit ve su oluşur.

Aktif çamurun ihtiyacı olan oksijen, havalandırma tankı tabanına döşenen difüzörler vasıtasıyla blower tarafından üretilen hava ile sisteme verilir. Bu havalandırma difüzörlerin uygun yerleştirilmesi ile aynı zamanda aktif çamurun çökelmemesi için gerekli tam karışımı da sağlar.

Havalandırma tankında yeterli hidrolik bekleme süresi sağlanan arıtılmış atıksular sürekli vaziyette çöktürme haznesine geçer. Biyolojik çöktürme tankında, atıksuyun içerdiği biyokütlenin çöktürülerek geri devir ettirilmesi sağlanacaktır. Yapısı sudan ağır olan biyokütle tank tabanına belirli bir hızda çökerken üstte kalan duru fazdaki arıtılmış su savaklardan taşkan şeklinde deşarj edilir. Çöktürme tankı dibine çöken biyokütle tankın taban eğiminden yararlanılarak orta kısımda toplanacaktır. Tankın merkezinde toplanan biyokütle pompa yardımıyla havalandırma tankındaki biyokütlenin sabit değerde tutulması için geri devir ettirilecektir.

Arıtılan suya deşarj esnasında dozaj pompası vasıtası ile klor (hipoklorit) ilave edilerek atıksu içinde oluşabilecek mikrobiyolojik faaliyetler engellenir.

Çamur miktarı arttığında ilgili yasal mevzuatlar çerçevesinde bertaraf edilir.

Page 19: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

17

WORKING PRINCIPLE OF EQUIPMENTThe biological treatment is performed with the activated sludge in the

biological aeration tank. Activated sludge is the mixture of organic and inorganic substances and alive and dead microorganisms. During activated sludge process, the microorganisms degrade the organic substance by using oxygen. The organic substance is both used in carbon and energy source in microbial growth and in synthesis of new cells. The degraded products are carbon dioxide and water.

The oxygen which is required by the activated sludge is given to the system with the air produced by the blower via diffusers installed at the bottom of the aeration tank. This aeration ensures the suitable installation of the diffusers and it also provides the mixture required for the activated sludge not to settle. The wastewater which is rested during the hydraulic resting period in the aeration tank constantly passes through the sedimentation tank. In the biologic sedimentation tank, the biomass of the wastewater is settled and recirculated. The biomass of which structure is heavier than the water settles at the bottom of the tank with a certain speed and the treated water at the clear stage on top is discharged by overflowing from the weir. The biomass settled at the bottom of the sedimentation tank is accumulated at the center of the tank thanks to inclination. The biomass accumulated at the center of the tank is recirculated by a pump in order to keep the biomass in the aeration tank at a constant value.

The chlorine (hypoclorite) is added in the treatment water by the dosing pump during discharging and the microbiologic activities which may occur in the wastewater are prevented.

When the sludge amount increases, it is destroyed in accordance with the relevant legislations.

Page 20: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

18

• Proje Bazlı Özel Tasarım İmkânı,

• Kompakt Tasarım,

• Kolay Nakliye ve Montaj /Demontaj,

• Uzun İşletme Ömrü,

• Sistemin Çalışmasını SCADA Üzerinden Kontrol ve Takip Etme İmkânı,

• Arıtma Tesisi İçin Ayrılan Alan Gereksiniminin En Aza İndirilmesi,

• Kurulacağı Yere Göre Estetik Uyum İçinde Olması,

• Paket Tesislerin Personel İstihdamına Gerek Kalmadan Tam Otomatik Çalışması,

• Kolay İşletme ve Bakım,

• Düşük İşletme ve Bakım Maliyeti,

• Kokusuz ve Gürültüsüz Çalışma,

• Dış Ortamda Çalışmaya Uygun.

• Project Based Special Design Possibility,

• Compact Design,• Easy Transportation and

Mounting / Demounting,• Long Operation Life,• Possibility to Control and Follow

the System Operation Over SCADA,

• Minimizing the Field Requirement Reserved for Treatment Facility,

• Aesthetic Consistency in the Installation Field,

• Full Automatic Operation of Package Facilities Without Personnel,

• Easy Operation and Maintenance,

• Low Operation and Maintenance Costs,

• Odor and Noise-Free Operation,• Suitable for Outdoor Operation.

Avantajları Advantages

Page 21: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

19

No Parça Adı / Part Name

1Paket Arıtma Çatısı / Package Treatment

Roof

2İşletme Odası /

Operation Room

3Çöktürme Haznesi / Sedimentation Tank

4Havalandırma

Haznesi / Aeration Tank

Page 22: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

20

DAF SİSTEMLERİ (ÇÖZÜNMÜŞ HAVA FLOTASYONU)

Genel Tanıtım veKullanım AmacıDAF sistemleri, atıksularda

bulunan bulanıklık, renk, askıda katı madde, yağ-gres gibi kirlilik yaratan maddelerin uzaklaştırılması amacıyla geliştirilmiştir. Kirleticilerin yüksek verim ve hızda sudan ayrılmalarını sağlar.

DAF sistemleri genellikle, mezbahalar, et işleme ve paketleme tesisleri, yağ üretim tesisleri, konserve imalathaneleri, tekstil endüstrisi, kimya endüstrisi, petrokimya endüstrisi gibi sektörlerde kullanılır.

Yüzdürme sistemlerinin verimini; ham suyun askıda katı madde konsantrasyonu, hava miktarı, yüzeysel hidrolik yük, tanecik yükselme hızı gibi faktörler etkiler.

Ekipmanın Çalışma PrensibiDAF’ın çalışma prensibi, çözünmüş hava

ile yağ-gres, askıda katı madde vb. kirletici maddelerin atıksudan ayrılması prensibine dayanır.

Atıksu DAF tankı flokülatöründen geçirilir. Flokülatöre kimyasal madde dozlanarak, homojen karışımı sağlanan atıksu DAF tankına dökülür. Giriş atıksu debisinin ~%30-40’ı DAF tankından alınır ve basınçlandırma tankına iletilir. Burada 4-6 bar basınç aralığında atıksu içerisinde hava çözünmesi sağlanır. Basınçlandırma tankından çıkan atıksu DAF tankı girişine geri devrettirilir. DAF tankına geçen atıksu içerisindeki çözünmüş hava atmosfere açıldığında mikro kabarcıklar oluşur. Mikro kabarcıklar su yüzeyine doğru yükselirken beraberinde atıksu içerisindeki askıda katı madde, yağ-gres vb. kirlilik yaratan maddeleri DAF tankı yüzeyine toplar. Yüzeye çıkan bu kirletici maddeler yüzey sıyırıcıları vasıtasıyla sıyrılarak yağ savağına alınır. Yağ savağında toplanan yağ, yağ toplama tankına alınır. DAF tankının alt kısmında toplanan çamur, santrifüj tip çamur pompasıyla ile çamur yoğunlaştırma tankına iletilir.

DAF tankının alt kısmında toplanan çamur, çamur pompalarıyla sistemden atılır.

Page 23: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

21

General Description and Intended UseDAF systems are developed

to remove materials such as turbidity, color, suspended solids, oil - grease which causes pollution in the wastewater. It helps to remove the pollutants with high efficiency and rapidly from the water.

DAF systems are generally used in slaughter houses, meat packing plants, oil production plants, canned food factories, textile industry, chemical industry, petrochemical industry.

The performance of the floating systems is affected by the factors such as the suspended solid concentration of the raw water, air amount, surface hydraulic load, particle elevation speed etc.

Working Principle Of EquipmentThe working principle of DAF is based

on removal of pollutants such as oil-grease, suspended solids etc. from wastewater with the help of dissolved air.

The wastewater is passed through DAF tank floculator. The chemical substance is dosed to floculator and the homogeneously mixed wastewater is poured into the DAF tank. ~%30-40 of inlet wastewater flow rate is taken from DAF tank and transmitted to pressure setting tank. The air in the wastewater is dissolved under 4 -6 bar pressure. The wastewater discharged from pressure settling tank is recirculated to DAF tank inlet. When the wastewater in the DAF tank is exposed to the atmosphere, the micro bubbles are seen in the water. While the micro bubbles elevate to the water surface, they bring the pollutant materials such as suspended solids, oil-grease etc. to the DAF tank surface. These pollutants on the surface are scraped by the surface scrapers and taken to the oil weir. The oil accumulated in the oil weir is taken to oil collection tank. The sludge accumulated at the bottom of the DAF tank is pumped to sludge thickening tank by centrifuge type sludge pump.

The sludge accumulated at the bottom of the DAF tank is removed from the system with sludge pumps.

DAF SYSTEMS(DISSOLVED AIR FLOTATION)

Page 24: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

22

• Proje Bazlı Özel Tasarım İmkânı,

• Kompakt Tasarım,

• Kolay Nakliye ve Montaj / Demontaj,

• Uzun İşletme Ömrü,

• Sistemin Çalışmasını SCADA Üzerinden Kontrol ve Takip Etme İmkânı,

• Arıtma Tesisi İçin Ayrılan Alan Gereksiniminin En Aza İndirilmesi,

• Kurulacağı Yere Göre Estetik Uyum İçinde Olması,

• Paket Tesislerin Personel İstihdamına Gerek Kalmadan Tam Otomatik Çalışması,

• Kolay İşletme ve Bakım,

• Düşük İşletme ve Bakım Maliyeti,

• Kokusuz ve Gürültüsüz Çalışma,

• Dış Ortamda Çalışmaya Uygun.

• Project Based Special Design Possibility,

• Compact Design,• Easy Transportation and

Mounting / Demounting,• Long Operation Life,• Possibility to Control and Follow

the System Operation Over SCADA,

• Minimizing the Field Requirement Reserved for Treatment Facility,

• Aesthetic Consistency in the Installation Field,

• Full Automatic Operation of Package Facilities Without Personnel,

• Easy Operation and Maintenance,

• Low Operation and Maintenance Costs,

• Odor- and Noise-Free Operation,• Suitable for Outdoor Operation.

AVANTAJLARI ADVANTAGES

Page 25: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

23

No Parça Adı / Part Name

1Atıksu Giriş Haznesi /

Wastewater Inlet Tank

2

Çözünmüş Hava Enjeksiyon Nozulları / Dissolved Air Injection

Nozzles

3 Sabit Basınç Vanası / Fixed Pressure Valve

4Basınçlandırma

Pompası / Pressure Setting Pump

5Yağ Toplama Haznesi

Karıştırıcısı / Oil Collection Tank Mixer

6

Yüzey Sıyırıcı Tahrik Redüktörü / Surface

Scraper Drive Reducer

7

Müdahale ve Bakım Platformu /

Intervention and Maintenance

Platform

8Yüzey Sıyırıcı Grubu /

Surface Scraper Group

9 Deşarj Savağı / Discharge Weir

10Basınçlandırma Tankı /

Pressure Settling Tank

11

Çözelti Hazırlama ve Dozaj Ünitesi /

Solution Preparation and Dosing Unit

12 Flokülatör / Floculator

Page 26: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

24

Page 27: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

25

Page 28: PAKET ARITMA SİSTEMLERİ PACKAGE TREATMENT SYSTEMS

26

Marmaracık Mah. 1982. Sok. No: 13/1 Ergene / Tekirdağ / TÜRKİYE+90 0282 686 63 33 pbx • +90 0282 686 63 34

• Ön Arıtma Ekipmanları / Pre-Treatment Equipments• Sıyırıcılar / Scrapers• Karıştırıcılar / Mixers• Aeratörler / Aerators

• Yönlendirme Ekipmanları / Routing Equipments• Paket Arıtma Sistemleri / Package Treatment Systems

• Çamur Susuzlaştırma Sistemleri / Sludge Dewatering Systems• Proses İçme Suyu Sistemleri / Process Drinking Water Systems

• Diğerleri / Others