Embed Size (px)
Citation preview
| 1 | 1
Troubleshooting and mobile measurements with ease
The PAK&GO is especially designed as a compact platform
for robust data acquisition and effortless graphical analysis
right up to the presentation.
PAK&GO
Simply unpack and GO. Packaged for optimal flexibility right
from the start
PAK&GO
01
02
03
2 | | 3
BLOCKSTARTING
YOUR
for quick and compact troubleshooting solutions
Based on a strong history in acoustics, vibration and strength – and with qualified references from renowned manufacturers – our robust and highly versatile PAK measurement solution provides you with accurate data acquisition and easy measurement and graphics. By choosing the PAK&GO, you are partnering with a company who will not only sell you a single system but is committed to the value of service and knows the sustainability that is founded on global support. The world of PAK is an ever increasing system of possibility built upon innovative product development, team spirit and the sincerity of customer satisfaction.
IMAGINE HOW EASY YOUR LIFE
WOULD BE IF YOU COULD ACQUIRE,
ANALYZE OR MANAGE DATA FROM
ANY PL ACE AT ANY TIME?
MOBILE
and MORE SHOCK VOLTAGE SOUND
P R E S S U R E A C C E L E R AT I O N
4 | | 5
FORPEOPLEON THE GO
A N D T H O S E W H O WA N T T O G E T G O I N G
the PAK&GO package avoids costly time consuming setups without compromising the same high quality results. Compounded by our compact frontend and powerful analysis and graphics on a standard Windows® laptop, the PAK&GO is the perfect tool for measurement tasks relating to shock, voltage, sound, acceleration and pressure.
AS AN OUT OF THE BOX SYSTEM
6 |
• 8 ICP®/voltage channels • Sampling rate: 102.4 kSa/s • Bandwidth: 45 kHz • 24 bit • 4mA ICP®current • TEDS
Empty slots to accomodate future growth. Place other sensor compatible Modules here to accommodate more sensor type and increase channel count.
• Combined power supply and controller VMEbus board
• Optional uninterrupted Power Supply between external power source and internal battery
This PAK&GO package contains a highly compact measurement system with 8 ICP®/voltage channels and the flexibility to grow within the PAK MKII range of channel counts, data rates and sensor compatible modules.
PAK&GO FRONTEND
C O M PAC T D I M E N S I O N S : 3 0 0 X 3 0 0 X 6 0 m m
SyncLink connection for synchronization of multiple frontends
• Ethernet connection for uninterrupted fast processing of data
• Provides continuous 5 MB/s to workstation
Bright LED display for immediate status communication
Grounding for ESD protection
• Strong and robust aluminum frame • Thermally optimized • Conduction cooled - no noisy fan
circulating dusty air around the electronics
• Optional battery backup
Highly accurate VMEbus signal conditioning board with automatic internal cailbration for added reliability and peace of mind
CHOOSE THE PAK&GO FRONTEND for:
• Any force, acceleration, pressure, shock and sound measurement task
using the ICP® (IEPE current sources) and voltage sensors
• Integrated measurement dynamics and analysis performance
• High quality and accurate data acquisition
• Quick, hassle free measurements
• Troubleshooting and mobile use
JUST
GO
MEASURE ANALYZE PRESENT
| 76 |
Tailor-made recording and streaming of throughput dataGuided measurement interface for efficient evaluation of measurement data and test routinesEffortless acquisition of analog signals and digital bus data, GPS and IRIGSupports fingerprint analyses like SignatureEnables analysis over different tracking parameters e.g. rpm, frequency etc.Export to ASAM ODS ATF format
8 |
EASYMEASUREMENTINTERFACE
I T ' S E A S Y
W I T H PA K E A S Y
M E A S U R E M E N T
M O B I L E M E AS U R E M E N T S M A D E E ASY
MEASURE ANALYZE PRESENT
Following the guided setup, data can be recorded and browsed through a data tree as in Windows® Explorer® - just with a single click
N AV I G AT E
Easily monitor the quality of your measured signal with our channel overview. Ideal for troubleshooting, PAK ensures the validity of your measurement and enables the visual tracking of the different channels
C H E C K
Choose diagram types and tracking parameters as required.Modify your view according to your preference. Fast and interactive switching is possible for easy decision making and clarity. Package the graphics in your analysis window using VAS Graphics2Go® and embed your results in PowerPoint® or Word® for further interactive use in presentations and reports
GRAPHICS
2GO
V I S U A L I Z E
Guided setup with automatic plausibility checks. Step by step orientation with the possibility of hopping between stages. TEDS functionality supported
S I M P L E
| 9
®
1 0 | | 1 1
E X P O R Tf r o m PA K
This thin data package can either be emailed or embedded in Microsoft PowerPoint® or Word®
documents.
PRESENT YOUR RESULTS RIGHT
AWAY BY SIMPLY SAVING YOUR
SELECTED PAK ANALYSIS RESULTS
AS A VAS GR APHICS2GO.
MEASURE ANALYZE PRESENT
S H A R EV I E W
Receivers of a VAS Graphics2Go® need not have PAK software installed on their computer. Simply open the file in VAS Graphics2Go® viewer, PowerPoint® or Word®.
WHILE ON THE GO, SHARE YOUR
RESULTS EFFORTLESSLY ALL
OVER THE WORLD.
I N T E R A C TP L AY B A C K
Browse and listen to the data, create markers, scale axes, zoom and much more.
VIEW AND INTER ACT FURTHER WITH
YOUR DATA .
®
© 2013. Müller-BBM VibroAkustik Systeme GmbH. PAK, edp Müller-BBM and VAS Graphics2Go are registered trademarks of Müller-BBM VibroAkustik Systeme GmbH. All other names marked with ™ or ® are trademarks or registered trademarks of other manufacturers in their respective countries. Information listed in this brochure is subject to change without notice due to product development. We accept no responsibility for the accuracy of the information provided. PAK&GO1310.
PAK&GO Packaged for optimal flexibility right from the start
• PAK MKII 2-slot with Accessories: Frontend with 8 ICP®/voltage channels, power supply and connector cables
• PAK 5.8 SOFTWARE: Throughput data recording, Streaming Signature, VAS Graphics2Go®
• LENOVO T4xx series LAPTOP: with Windows® 8 operating system and Office® 2013 (Home and Business Suite)
• Backpack
• Installed and ready to measure
• Package price: EUR 26.500.00 incl. battery backup
• Offer valid until 15 December 2013
HeadquartersMüller-BBM VibroAkustik Systeme GmbHRobert-Koch-Straße 13, 82152 Planegg/Munich, GermanyTel. +49-89-85602-400 • Fax +49-89-85602-444E-Mail: info.de@MuellerBBM-vas.dewww.MuellerBBM-vas.dewww.MuellerBBM-vas.com
SubsidiariesBeNeLux & UK: Müller-BBM VibroAkustik Systeme B.V.Rechterensedijk 8, 7722 HB Dalfsen, The NetherlandsTel. +31 529 795 036 • Fax +31 38 8450-177E-Mail: [email protected]
China: Müller-BBM VibroAkustik Systeme Beijing LtdUnit 1002-1003, North Ring Center, #18 Yumin Road, Xicheng District, Beijing 100029, ChinaTel. +86-10-5128-5118 • Fax +86-10-8225-1626E-Mail: [email protected]
France: Müller-BBM VibroAkustik Systeme S.A.R.L.Parc Saint Christophe, 10 avenue de l’Entreprise, 95865 Cergy-Pontoise Cedex, FranceTel: +33-1-3422-5884 • Fax: +33-1-3422-5885E-Mail: [email protected]
Scandinavia: Müller-BBM Scandinavia ABMarieholmsgatan 9, 41502 Gothenburg, SwedenTel. +46-10-4808500 • Fax +46-10-4808599E-Mail: [email protected]
South Africa: Mecalc (Pty) Limited101 Witch-Hazel Avenue, Highveld Technopark, Centurion 0157, South AfricaTel. +27-12-682-9000 • Fax +27-12-682-9050E-Mail: [email protected]
South Korea: Müller-BBM VibroAkustik Systeme Korea Ltd4th Floor, Daesong Bldg., 70-2, Yangjae-Dong, Seocho-Gu, 137-130, SeoulTel. +82-2-529-0375 • Fax +82-2-529-0378E-Mail: [email protected]
USA: Müller-BBM VibroAkustik Systeme, Inc.3891 Ranchero Drive, Suite 30, Ann Arbor, MI 48108, USATel. +1-734-327-4147 • Fax +1-734-327-4143E-Mail: [email protected]
DistributorsAustralia: Vipac Engineers and Scientists Ltd279 Normanby Road, Port Melbourne, Victoria 3207, AustraliaTel. +61-3-9647-9700 • Fax +61-3-9646-4370E-Mail: [email protected]
India: Welan Technologies‘Nissim’, Plot 10A, Lane No 13, Ganesh Kripa Society, Paud Road, Pune 411038, IndiaTel. +91-9225510908 • Fax +91-20-25393126E-Mail: [email protected]
Italy: BPS s.r.l.Via I. Newton, 12, 20016 Pero (MI), ItalyTel. +39-02-3534830 • Fax +39-02-33912334E-Mail: [email protected]
Japan: TOYO Corporation1-6, Yaesu 1-chome, Chuo-ku, Tokyo 103-8284, JapanTel. +81-3-3279-0771 • Fax +81-3-5205-2030E-Mail: [email protected]
