Embed Size (px)
Citation preview
P R O V E N U N D E R F I R E
Point Blank Enterprises 800-413-5155 www.pointblankenterprises.com Made in
the USA
This fully integrated and modular system including the Front Mount, Interlocking and Stand-alone Long Rails, Mandible Guard, and Visor has been designed to work intuitively with any PARACLETE helmet.
Head Protection SystemFRONT MOUNT
INTERLOCKING RAIL SYSTEM
MANDIBLE GUARD
THREE POSITION VISOR
Paraclete HelmetACCESSORIES
FRONT MOUNT
Engineered for superior performance, the visor provides optimum high-impact protection, �awless optics and maximum �eld-of-view. Designed for quick donning and do�ng, it is scratch, fog and chemical resistant.
WEIGHT (Full system, lens and arm): 9.7oz, Size Large
BALLISTIC PERFORMANCE: (V50): 245 m/s (804 fps), 1.1 g (17 gr) FS IMPACT PERFORMANCE: High mass tested at 70 joules when impacted at the front and sides as a separate unit and in conjunction with the Mandible Guard
THREE POSITION VISOR
Part Number: HLMH99000
Part Number: HLMH102000
Part Number: HLMH10000
RAIL SYSTEM
Interlocking Long Rails seamlessly integrate with the Front Mount and can be used simultaneously with the visor and mandible guards; Standalone Long Rails work with commonly used NVG mounts
THREE POSITION VISOR
MANDIBLE GUARDS
WEIGHT (including attachment straps and hardware): 470 g (17 oz) BALLISTIC PERFORMANCE: V50 exceeds 670 m/s (2,198 fps) using a 1.1 g (17 grain) FSP IMPACT PERFORMANCE: Systems able to withstand over 70 joules of impact with no damage
MANDIBLE GUARDS
Part Number: HLMH103000
O�ering lightweight blunt force protection for lower jaw in a durable, low-pro�le design. Mandible Guards attach to the Front Mount, minimizing training while enabling rapid attachment and removal of the system.Mandible and Visor are compatible with red dot sighting systems.
The Front Mount is a lightweight, multi-purpose mount for the PARACLETE Helmet with an inter-changeable center piece system. The 3-point helmet attachment assembly provides excellent stability for NVG use no new drill holes required. Components can be swapped to accommodate the Visor or NVGs. The Front Mount enables seamless integration of the Visor, Mandible Guard and Interlocking or Standalone Long Rails.
