Part specs.

™

™

5-way hub

6.1mm

12.5mm

18mm(centre of hub to ball centre)

16mm 4mm

52.6mm

14mm

Injection moulded in automotive grade UV-stabilised Acetal.

Datasheet.

Mass: 18g

AccompAnying pArt

Designed to accommodate a M6 counter sunk (CSK) screw.

The hub screws supplied in the kit are 25mm long.

ScAle 1:1

™

™

cAD models?Download simplified but dimensionally accurate CAD models here.

?

25mm

12mm

6mm

6-way hub

6.1mm

12.5mm

19mm(centre of hub to ball centre)

54.6mm

16mm

14mm

3mm

ScAle 1:1

™

™

25mm

12mm

6mm

cAD models?Download simplified but dimensionally accurate CAD models here.

?

Injection moulded in automotive grade UV-stabilised Acetal.

Datasheet.

Mass: 17g

AccompAnying pArt

Designed to accommodate a M6 counter sunk (CSK) screw.

The hub screws supplied in the kit are 25mm long.

Ball connector

16mm

8mm

30.4mm

2mm(wall thickness)

25mm(base to ball centre)

16mm

4.8mm

11mm

Base

Ball

Injection moulded in automotive grade UV-stabilised Acetal.

Datasheet.

Mass: 3.2g

AccompAnying pArt

Designed to accommodate a 4.5mm diameter counter sunk (CSK) wood screw.

The wood screws supplied in the kit are 65mm long coated decking screws.

pZ2 bit

ScAle 2:1

™

™

65mm

7.5mm

4.5mm

cAD models?Download simplified but dimensionally accurate CAD models here.

?

Hub metalwork

All metalwork is A2 (304) stainless steel.

The metalwork clamps the ball connectors tightly into the sockets. This prevents the ball connectors being pushed out of the sockets through the entrance axis and also fixes their position, making the hubs resistant to rotation.

Hub screwM6

Hex Socket

locking plate6mm hole

1.5mm thick

Wing nutM6

Hanging eyeletM6

One hanging eyelet is supplied in the kit but they can be used on every hub in place of the

wing nuts to provide an anchoring point.

™

™

25mm

12mm

6mm

30mm