ArcGIS Desktop 10.3.1 Installation Guide - NSFGRACEnsfgrace.net/ArcGIS for Desktop Installation on Windows...Institute for Geospatial Research & Education at EMU Page 2 ArcGIS Desktop

For NSFGRACE Project Student Interns

2016

Institute for Geospatial Research & Education

Eastern Michigan University

2/8/2016

ArcGIS Desktop 10.3.1 Installation Guide

Institute for Geospatial Research & Education at EMU Page 1

ArcGIS Desktop 10.3.1 Installation Guide 2016

ArcGIS for Desktop Installation

1. ArcGIS Desktop must be installed on computers running one of the following Windows

Operating Systems

Operating Systems Minimum OS Version

Windows 10 Home, Pro, and Enterprise (32 bit and 64 bit [EM64T])**

Windows 8.1 Basic, Pro and Enterprise (32 bit and 64 bit [EM64T]) Update: April 2014

Windows 8 Basic, Pro and Enterprise (32 bit and 64 bit [EM64T])

Windows 7 Ultimate, Professional and Enterprise (32 bit and 64 bit [EM64T]) SP1

Windows Server 2012 R2 Standard and Datacenter (64 bit [EM64T]) Update: April 2014

Windows Server 2012 Standard and Datacenter (64 bit [EM64T])

Windows Server 2008 R2 Standard, Enterprise and Datacenter (64 bit [EM64T]) SP1

Windows Server 2008 Standard, Enterprise and Datacenter (32 bit and 64 bit [EM64T]) SP2

2. Check your computer’s ability to run ArcGIS

Check your computer's ability to run ArcGIS

3. Hardware requirements

Supported and Recommended

CPU Speed 2.2 GHz minimum ; Hyper-threading (HHT) or Multi-core recommended

Platform x86 or x64 with SSE2 extensions

Memory/RAM 2 GB minimum

Display properties 24-bit color depth

Screen resolution 1024 x 768 recommended minimum at normal size (96 dpi)

Swap space Determined by the operating system; 500 MB minimum.

Disk space

2.4 GB . In addition, up to 50 MB of disk space may be needed in the Windows System directory (typically,

C:\Windows\System32). You can view the disk space requirement for each of the 10.3 components in the Setup

program. If using ArcGlobe, additional disk space may be required. ArcGlobe will create cache files when used.

Video/Graphics adaptor

64 MB RAM minimum, 256 MB RAM or higher recommended. NVIDIA, ATI, and Intel chipsets supported. 24-bit

capable graphics accelerator. OpenGL version 2.0 runtime minimum is required, and Shader Model 3.0 or higher

is recommended. Be sure to use the latest available driver.

Networking Hardware Simple TCP/IP, Network Card, or Microsoft Loopback Adapter is required for the license manager.

4. Software requirements

• .NET Framework 3.5 SP1 must be installed prior to installing ArcGIS for Desktop.

• Internet Explorer must be installed prior to installing ArcGIS for Desktop

• Python requirement for Geoprocessing. ArcGIS for Desktop geoprocessing tools require

that Python 2.7.x and Numerical Python 1.7.x are installed. The Python installation

location should not include spaces.



5. Step by Step guide for ArcGIS Desktop Installation on Windows 10

1) Download ArcGIS for Desktop (assuming you are using Internet explorer)

You should have a link to the software file in your email. You need to click on

that link.

2) After clicking on that link, you will see a new popup window asking you to run or

save the software file. You must click on “Save” button.

3) You’ll see it starts downloading as shown below:

It may take a while for the download to finish depending on the speed of your

internet connection.

4) When it finishes, you’ll see something like this:



5) You can click on “Open folder” button, to go to the folder containing the file as

shown below

This is a zipped file, so you will need to double click on the file to extract it.

6) After double clicking on it, you should see something similar to the following

screenshot. Make sure to write down this file path so you can find it later. You

can now click on the “Next” button.



7) The install wizard will extract the software and put it in the directory selected in

the previous step.



8) You should see a screen similar to the follow screenshot when it’s done. Please

make sure you enable the “Launch” checkbox to begin the setup process, and

then click on the “Close” button to begin installing the software.

**If you clicked on “Close” without checking the “Launch” box, you can run the

setup program by clicking on setup.exe file in the directory that you wrote down

in the previous step.

9) You may see a pop-up window asking for your permission to install the software.

Please click on “Yes” to proceed.



10) If you haven’t already installed the Microsoft .NET Framework 3.5 sp1, the

following window will appear:

This message indicates .NET Framework 3.5 SP1 is missing on your computer. You should click

on the link (NET Framework 3.5 SP1) in the email to download install .NET Framework 3.5 SP1,

or you can copy and paste the following address in to your internet browser:

http://esrik-12gis.emich.edu/k12/downloads/ArcGIS_Desktop/dotnetfx35setup.exe

After downloading the .NET Framework software, you should double-click the

Framework 3.5 file to install it.





11) If Framework 3.5 sp1 already exists on your machine, you should see the

following ArcGIS 10.3.1 for desktop setup window. Click “Next>”.

12) Accept the license agreements to proceed. Then click the “Next>” button.



13) Choose the “Complete” option and click on the “Next>” button.

14) Click the “Change” button to choose a folder for installation. If it suits you, use

the default destination folder and click on “Next>” button



15) The setup program will inform you that it needs to install Python on your

machine and show the destination folder for installation. You can accept the

default folder and click on “Next>” button.

16) The “Ready to install the program” page will be shown to you. Click the “Install>”

button to start the installation process. You can also click on the “<Back” button

if you want to change any of the settings you have already configured.



17) The setup program will start to update your system and install ArcGIS for

Desktop. Note that it takes some time for the program to finish installation.

Please wait for the setup program to complete.



18) After completion, you will see a screen similar to the one below.

Click on “Finish>” button to proceed.

19) The ArcGIS administrator wizard window will automatically open shortly after

the installation is complete.

• In the section labeled with “1. Select a product”, you should choose the

“Advanced (ArcInfo) Single Use” and keep it selected.

• In the section labeled with “Launch the Authorization Wizard for Single

Use products”, you should click on “Authorize Now>” button.



20) After clicking the “Authorization Now” button, the Authorization Options

window will appear. *You should have received a provisioning file in your email

as an attachment. You need to save that attached provisioning file on the

machine that you are installing ArcGIS Desktop on before going to the next step.

Remember where you choose to save this file as you will need to locate it in the

upcoming step.

Among the Authorization Options, you need to choose the last option

labeled with “I have received an authorization file from Esri and am now ready

to finish the authorization process”





Click on “Browse>” button to browse to the provisioning file you downloaded

from your email (click this file and make it highlight), and then click on “Open>”

on that window

On the “Authorization Wizard” windows, you can click on the “Next>” button.

21) Select “Authorize with ESRI now over the Internet”.

Then click on “Next>” button to start authorizing ArcGIS Desktop.



22) You must input your personal information. If the program automatically

populated some information in the boxes, you need to check each of them to

make sure it is the correct information.

Click on the “Next>” button once you have populated the fields.

23) On the next panel, you need to fill your organization, industry and status of

yourself. Use the example seen below as a guideline, then click on “Next>”.



24) You should see the authorization numbers have populated automatically.

If you don’t see these numbers, you should contact Rolland <[email protected]>.

You don’t need to change anything on this form, so go ahead and can click on

“Next>”.



25) Select “I have authorization number(s) to authorize one or more extensions”.

Click “Next>”.



26) You don’t need to do anything on “Evaluate Software Extensions”,

so you can click on “Next>”.



You need to have internet connection in order to complete authorization! Please make sure

you connected to the internet before clicking on the “Next>” button.

27) At this point, you will see the authorization of the software. It may take a few

minutes depending on the speed of your internet connection.



After completing authorization, you should see a screen similar to the one below.

You can click on “Finish>”.



28) Now, the installation is complete

Notes:

If you missed the authorization step, you can also authorize ArcGIS using the

ArcGIS Administrator program. Assuming you are using Windows 10, you can find the

program by following the steps below:

a. From main menu >-all app >-ArcGIS.

b. Double-click “ArcGIS Administrator”



c. The ArcGIS Administrator app will be open

d. You should see the following window.



e. Click “Desktop” folder from the left panel

f. Make the checkbox checked on “Advanced (ArcInfo) Single Use.

g. From the bottom of the window, click on “Authorize Now” button

h. You can follow the wizard to complete authorization.

This document is prepared by NSFGRACE project technical support team at Institute for

Geospatial Research & Education, Eastern Michigan University. You may contact us if you have any

questions. You can post your question on NSFGRACE project student intern helpdesk.

Documents

ArcGIS Desktop 10.3.1 Installation Guide - NSFGRACEnsfgrace.net/ArcGIS for Desktop Installation on Windows...Institute for Geospatial Research & Education at EMU Page 2 ArcGIS Desktop