683 LINCOLN LAKE AVE. SELOWELL, MI 49331

AUCTIONPUBLIC

Industries (1991) Inc.

21700 Northwestern Hwy.Suite 1180Southfield MI 48075www.maynards.comTel: (248) 569-9781Fax: (248) 569-9793Auctions • Liquidations • Appraisals

Visit Our

New

Website!• Industrial Auctions & Liquidations• Consumer Product Liquidations• Fine Art & Antiques Auctions• Appraisals • Contact Information & More

www.maynards.comwww.maynards.com

VERSON S4-600-156-96T Straight Side Press

MIGHTY VIPER VMC3000GXT Vertical Machining Center OKK MCV-860 Vertical Machining Center

Due to Change of Business

PUBLICAUCTIONTHURS, JUNE 7TH/07

Preview: Wednesday, June 6 from 9am-4pm

10:00 AM

683 LINCOLN LAKE AVE. SELOWELL, MI 49331

WELL-MAINTAINEDTOOL & DIE FACILITY

156”x96”BED

2005

1997

ROLLINGBOLSTER

REBUILTCOMPLETELY

IN 2001

$375,000REPLACEMENT

COST

1998 DALLAS Servo Feed Line

DALLAS Servo Feed LineVERSON S4-600-156-96T Straight Side Press

1998

REBUILTCOMPLETELY

IN 2001

ROLLINGBOLSTER

WINDOWS

VERSON 400-S4-108T Press VERSON S2-300-84-48 Press McKAY WARCO 300-2-84 Press VERSON 896-B Gap Press

STAMPING PRESSES SERVO FEED LINES•DALLAS Coil Feed System, Code 06800 Coil Reel, 36” x 72”,

20,000# Capacity, s/n 15806; Code 84151 Stock Peeler, .125” x 36” Capacity, s/n 15807; Code 15826 Hydraulic Material Lift, 36” Wide Capacity, s/n 15809; Code 74035 Stock Feeder, .062” x 48” Capacity, s/n 14821; Unico Control Unit

•1998 DALLAS Coil Feed System Model DPR 20000# x 36RH Coil Reel, SN 20065, 20000# x 36” Wide Coil Capacity, 20” ID x 72” OD Max. Coil; Model LC-20000# x 36 Coil Car, s/n 20066; Dallas PTR-36 Stock Peeler/Restrictor, s/n 20067; Dallas DRFS-436-RH Stock Feeder, s/n 20068, .156” x 36” W Capacity

•BROWN & BOGGS Model 48-14 Coil Straightener, s/n 72144 & 72145

•COLT Model CRD6024 Coil Reel, 6,000 lb. cap., s/n 1201416

•4,000 lb. Coil Cradle

Adjustment, 25” Windows, Air Clutch, Toledo Quik-Learn Tonnage Monitor, Brake Monitor, Controls, Pedestal Mounted Dual Palm Buttons, s/n 46-493

•VERSON S2-300-84-48T Straight Side Press, 300-Ton, 2-Point, Eccentric, 25.5” to 37” Min./Max. Shut Height, 7.5” Slide Adjustment, 18” Stroke, 84” L-R x 48” F-B Bolster, 84” LR x 48” FB T-Slotted Upper Platen, Pedestal Mounted Dual Hand Actuators, 24” x 30” Windows, Air Clutch, Link-Logic Brake Monitor controls, Tonnage Monitors, s/n 13582

•VERSON 896-B Gap Frame Press, 250-Ton, 47” FB x 125” LR Lower Bed, 42” FB x 114” LR Upper Platten, 16” Stroke, 27.35” to 30” Min./Max. Shut Height, 6” Bolster Plate, Air Clutch, Palm Controls, Toledo Quick Learn Tonnage Monitor, Brake Monitor and Pedestal Mounted Dual Hand Actuators, Controls, s/n 3052

•VERSON S4-600-156-96T Straight Side Press, 600-Ton, 4-Point, 24” Stroke, 12” Slide Adjustment, 16-SPM, 96” F-B x 156” L-R Roll-Out Bolster, 96” FB x 156” LR Upper Platen, 97” Max. Shut Height, 10” T-Slotted Bolster Plate, Air Clutch, Counterbalance, 59” x 33” Windows,Tonnage Monitor, Pedestal Mounted Dual Palm Buttons, s/n 18666

•VERSON 400-S4-108T Straight Side Press, 400-Ton, Single Crank, 4-Point, 108” LR x 76” FB Bolster, 44” x 28” Windows, 4” Bolster Plate, Air Clutch, 18” Stroke, 33” Shut Height, 8” Slide Adjustment, 15-SPM; Spra-Rite Auto Lubricant, Tonnage Monitor, Pedestal Mounted Dual Palm Buttons, s/n 11383

•WARCO 300-2-84 Straight Side Press, 300-Ton, Double Crank, 60” FB x 84” LR Bed, 12” Stroke, 18.5” to 28.875” Min./Max. Shut Height, 3” Bolster Plate, 20-SPM, 10” Slide

MIGHTY VIPER VMC3000GXT Vertical Machining Center OKK MCV-860 Vertical Machining Center

FADAL 4020A Vertical Machining Center

2005

2000

FADAL 4020 Vertical Machining Center

OKK VM5-II Vertical Machining Center CHARMILLES Robofil 290 EDM

MITSUBISHI DWC90 EDM

$375,000REPLACEMENT

COST

MACHINING CENTERS•2005 MIGHTY VIPER VMC 3000GXT Vertical Machining

Center, Bridge Type, 40-Position ATC, Cat 50 Taper, 72” x 122” T-Slotted Table, 120” x 77” x 50” XYZ travels, 86.6” Between Columns, 20,000# Table Load, 6000-RPM Geared Drive Spindle, Mitsubishi M625 CNC Control, Ridgid Tapping, 35 HP, Chip Conveyor, Coolant Thru-Spindle, s/n 007030

•1997 OKK MCV-860 CNC Ver tical Machining Center, 30-Position ATC, 80” x 34” x 28” XYZ Travels, 35hp, Coolant Thru-Spindle, OKK Neomatic 530 CNC Controls, Data Server, Ridgid Tapping, 50 Taper, 6,000 RPM Spindle Speed, Chiller, Transformer, s/n 177

1997

2AVAILABLE

2000

2AVAILABLE

MAZAK V515 Vertical Machining Center

•2000 FADAL VMC-4020A CNC Vertical Machining Center, 40” x 28” x 20” XYZ Travels, 7500-RPM’s, 21-Position ATC, 20” x 48” Table, Fadal CNC-32MP CNC Controls, Ridid Tapping, High-Speed CPU, Graphics, Pre-Wired 4th Axis, s/n 12000060853

•1995 FADAL VMC-4020 CNC Vertical Machining Center, 40” x 20” x 20” XYZ Travels, 21-Position ATC, 20” x 48” Table, 22hp, #40 Taper, 10,000 RPM spindle speed, Fadal CNC-88HS CNC Controls, High-Speed CPU, Graphics, Pre-Wired 4th Axis,s/n 9506966

•1991 MAZAK V-515 CNC Vertical Machining Center, 30-Position ATC, 21½” x 51½” T-Slotted Table, 40” x 20” x 22” XYZ Travels, 6000-RPM’s, #50 Taper, Mazatrol M32B CNC Controller

•2000 OKK VM5-II CNC Vertical Machining Center, 30-Position ATC, 40” x 20” x 20” XYZ Travels, 22” x 41.5” T-Slotted Table, Auto Coolant, OKK Neomatic 635 CNC Controls, Hard Drive and Data Server, 50 Taper, Ridgid tapping, 8,000 RPM spindle speed, Chiller, Coolant Thru-Spindle, s/n MA60380

•2000 FADAL VMC-4020A CNC VMC, 40”x28”x20” XYZ Travels, 7500-RPM’s, 21-Position ATC, 20” x 48” Table, Fadal CNC-32MP CNC Controls, Ridgid Tapping, High Speed CPU, 422K Memory Expansion, Pre-Wired 4-Axis, s/n 12000060854

Milling Machines CINCINNATI #4 Mill MAXPORT Mill BRIDGEPORT Mill

CINCINNATI Verci-Power Mill CARLTON 5’x17” Radial Drill CARLTON 5’x15” Radial Drill MARVEL Series 8 Bandsaw WORK-A-MATIC Bandsaw

DOALL C916 Bandsaw SUMMIT R915L Radial Drill GROB 4V-18 Bandsaw MEDINA Mod. A End Grinder

EDM’S•1996 CHARMILLES Robofil 290 Wire EDM, 14½” x 28½”

Work Table, 19.7” x 33.5” x 7.9” Workpiece Dimensions, 1102# Max. Workpiece Weight, 15.7” x 9.8’ x 7.9” XYZ Travels, 35-IPM, Automatic Threading, Dielectric Fluid System, Charmilles CNC Controls with Color CRT; Advantage SC-2APT 40FX Watt, s/n 62339

•1991 MITSUBISHI DWC-90C CNC Wire EDM, 13.8” x 15.7” x 6.3” Max. Workpiece Dimensions, 264# Max. Workpiece Weight, 16.5” x 20.1” Table, 9.8” x 11.8” Machining Range, 31.5” Min. Speed, Mitsubishi Programmable Controls, Futaba Pulsescale DRO, Transformer, s/n 509C1754

•1992 MITSUBISHI DWC-90C CNC Wire EDM 13.8” x 15.7” x 6.3” Max. Workpiece Dimensions, 264# Max. Workpiece Weight, 16.5” x 20.1” Table, 9.8” x 11.8” Machining Range, 31.5”/Min. Speed, Mitsubishi CNC Controls, Futaba Pulsescale DRO, Transformer, s/n 519C1946

MILLING MACHINES•CINCINNATI Verci-Power Vertical Milling Machine, 20”

x 95” T-Slotted Table, Newall DP-7 3-Axis DRO, Variable Speeds

•1999 BRIDGEPORT Vertical Milling Machine, 2hp, 9” x 48” T-Slotted Table, Variable Speeds, Newall Sapphire 2-Axis DRO

•1999 BRIDGEPORT Vertical Milling Machine, 2hp, 9” x 48” T-Slotted Table, Variable Speeds, Newall Sapphire 2-Axis DRO

•1992 MAXPORT 2VS Vertical Milling Machine, 3hp, 9” x 48” T-Slotted Table, 70 to 4200-Spindle Speeds, Kurt 6” Rotary Vise, Newall Sapphire 2-Axis DRO, s/n 7617

•1978 BRIDGEPORT Series 1 Vertical Milling Machine, 2hp, 9” x 48” T-Slotted Table, Variable Speeds, Newall Sapphire 2-Axis DRO, s/n 196203

•ACRA Vertical Milling Machine, 3hp, 10” x 54” Table, 70 to 4200-Spindle Speeds, Kurt 6” Vise, s/n 900017

•1950 CINCINNATI #4 Vertical Milling Machine, 18” x 92” T-Slotted Table Table, 16 to 1600-Spindle Speeds, s/n, 4J4V1W-8

RADIAL ARM DRILLS/ DRILL PRESSES

•CARLTON Radial Arm Drill 5’ Arm x 17” Column, Power Quill Feed, 12 to 1200-Spindle Speeds, Parallel Riser System, s/n 3A-3710

•CARLTON Radial Arm Drill, 5’ Arm x 17” Column, 15 to 1500-Spindle Speeds, Power Quill Feed, Parallel Riser System

•CARLTON Radial Arm Drill, 5’ Arm x 15” Column, Power Quill Feed, 15 to 1500-Spindle Speeds, 30” x 48” T-Slotted Riser Table, 10hp, s/n L917

•CARLTON Radial Arm Drill, 4’ Arm x 11” Column, Power Quill Feed, Riser Table, 80 to 1500-Spindle Speeds

•SUMMIT R915L Radial Arm Drill, 3’ x 8”, 60 to 2000-Spindle Speeds, 3hp, Power Quill Feed, 18” x 20” Riser Table, 6” Drill Vise, s/n 2351

•FOSDICK 4 Ft. Sensisitve Radial Arm Drill, 4’ x 12”, 30 to 1200-Spindle Speeds, Power Quill Feed, 24” x 48” T-Slotted Knee Type Riser Table

•LELAND-GIFFORD Single Spindle Drill Press, 21” x 23” Table, 20” Swing, 150 to 1800-Spindle Speeds, 6” Drill Vise

•1993 CYCLEMATIC S-24B Vertical Drill Press, 18” x 24” Table, 24” Swing, 80 to 950-Spindle Speeds, 1.5hp, s/n 8207057

•LELAND-GIFFORD Single Spindle Drill Press, 25” x 36” Oil Table, 150 to 1800-Spindle Speeds, 26” Swing, 6” Drill Vise

•LELAND-GIFFORD Single Spindle Drill Press, 16” Swing, 15½” x 15½” Table, 150 to 1800-Spindle Speeds, Superior Hone VH 2-Spindle Honing Attachment, s/n SHE2

1999

GALLMEYER & LIVINGSTON 350 Surface Grinders JFMT-GINI Engine Lathe KENT 628 Surface Grinder HARRIG Surface Grinder

19992AVAILABLE

MATTISON Mod. 24 Rotary Surface Grinder Surface Grinders

ACER AGS1632 Surface Grinder KENT KGS63AHD Surface Grinder TRIO Face Grinder

1996

BANDSAWS•1994 DO-ALL C-916M Horizontal Band Saw, 9” x 16”

Cutting Area, Manual, 2hp, Adjustable Feed, Auto Coolant, Controls, s/n 501-94634

•MARVEL Series 8 Vertical Bandsaw, Power Feed, Tilting Table, 18” Throat, 18” x 20” Cutting Area, s/n 812558

•PARMA Work-A-Matic Vertical Bandsaw, Coolant Spray, 12” Throat, Tilting Head, 19” x 29” Table, s/n 1190122

•GROB 4V-18 Vertical Band Saw, 18” Throat, 24” x 28” Tilting Table, Table Feed, s/n 2750

•CINCINNATI #2 Horizontal Band Saw, 12” x 53” T-Slotted Table, 20 to 1500-Spindle Speeds

GRINDERS•MATTISON 24 Rotary Surface Grinder, 36” Dia. Magnetic

Chuck, 24” Dia. Segmented Grinding Wheel, Auto Coolant, Barnesdrill Sludge Separator, s/n 24-596

•1996 ACER AGS-1632AHD Hydraulic Surface Grinder, 16” x 32” Magnetic Chuck, Wheel Dresser, Incremental Down Feed, Pedestal Control, Auto Coolant, s/n 96080707

•1992 KENT KGS63AHD Hydraulic Surface Grinder, 12” x 24” Magnetic Chuck, 5hp, Auto Coolant, Control Panel with DRO, s/n 92046305

•1999 HARIG 618 Ballway Surface Grinder, Hand Feed, 1.5hp Spindle Motor, 6” x 18” Permanent Magnetic Chuck, s/n B10073-W

•1991 KENT KGS-200 Surface Grinder, Hand Feed, 2hp Spindle Motor, 6” x 18” Permanent Magnetic Chuck, Controls, s/n 91090915

•CHEVALIER FSG-618M Surface Grinder, Hand Feed, 2hp Spindle Motor, 6” x 18” Permanent Magnetic Chuck, s/n A3809018

•GALLMEYER & LIVINGSTON 350 Surface Grinder, Hydraulic, 8” x 24” Magnetic Chuck, Auto Coolant, Controls, s/n 350258

•GALLMEYER & LIVINGSTON 350 Sur face Grinder, Hydraulic, 8” x 24” Magnetic Chuck, Auto Coolant, Controls, s/n 350479

•TRIO TOOL COMPANY Knee Grinder, 14” x22” Magnetic Chuck, Hydraulic, 16” Segmented Grinding Wheel, 40hp, Chucktron Chuck Controls, s/n 3-3388-B-79

•MEDINA A End Grinder, 220/440-Volts, 6” x 12” Magnetic Chuck, 7” Grinding Wheel

•CINCINNATI 104 Pedestal Grinder, 12” Wheels, Dual End•KALAMAZOO Belt Grinder, 1hp, 6” Vertical Belt, on Stand

LATHES•JFMT-GINI JI-360A Geared Head Engine Lathe, 14” x

40”, 3-Jaw Chuck, 4-Jaw Chuck, 7½” x 12” Plate, Tail Stock, Cross Slide, Quick Change Tool Holder, 110 to 2000-Spindle Speeds, Standard and Metric Threading, s/n 193

BROWN & SHARPE XCEL 9-15-9 CMM TAYLOR TC-300S Forktruck CAT T150D Forktruck

2000 1999

695HOURS

CMM’S•2000 BROWN & SHARPE XCEL 9-15-9 Chameleon CNC

Coordinate Measuring Machine, 51” x 86” x 8” Granite Surface Plate, Bridge Type, Approx. 32” x 60” x 30” Measuring Area, Renishaw PH10MQ Probe, Computer, Software, Printer, s/n 1298-2490

•MITUTOYO BH506 Coordinate Measuring Machine, Code 196-427-3B, 40½” x 28½” x 8” Granite Surface Plate, Approx. 24” x 20” x 15” Measuring Area, Renishaw MIP Probe, Computer, Software, s/n 96080010

MOBILE EQUIPMENT•1999 TAYLOR TC-300S Fork Lift Truck, 30,000# Max.

Capacity, LP Gas, Solid Tires, Overhead Guard, 690 Hrs, 72” Forks, Lateral Fork Movement, 695 hrs, s/n S-D7-27390

•1988 CATERPILLAR T150D Fork Lift Truck, 15,000# Max. Capacity, 111” Max. Lift Height, LP, Solid Tires, Overhead Guard, 5283 Metered Hours, 60” Forks, s/n 5MB01300

•1992 TOYOTA 5FGC25 Lift Truck, 4,500# Max. Capacity, 185” Max. Lift Height, LP, Solid Tires, Overhead Guard, 8845 Hours, 48” Forks, 3-Stage Mast, Side Shifter, s/n 75856

•2006 CADILLAC STS-4 Sedan, 4-Door, 4.6L V-8 Gas Engine, Auto., Cruise, Tilt Wheel, Power Seats, A/C, DVD Player, CD Player, Sun Roof, Power Windows & Locks, 23,000 Miles

•2004 FORD Expedition, Eddie Bauer, Sport Utility Vehicle, 4-Door, 4X4, 5.4L V-8 Gas Engine, Auto Transmission, Cruise, Tilt Wheel, Leather Interior, Sun Roof, 6-Disc In Dash CD Player, A/C, Power Windows and Locks

•2003 FORD Expedition XLT, Sport Utility Vehicle, 4X4, 5.4L V-8 Gas Engine, 4-Door, Auto. Trans., Leather Interior, A/C, Cruise, Tilt Steering Wheel, 6-Disc In Dash CD Player, Power Windows and Locks, Power Seats, 171,374 Miles

•2001 GMC C6500 Flatbed Truck, 76,593 Miles, Diesel Engine, 6-Speed Trans., Single Axle, Dual Rear Wheels, 18’ Flatbed with Steel Sides

•1997 GMC 3500HD SLE Flatbed Truck, 252,586 Miles, Cat Diesel Engine, Auto. Trans., Single Axle, Dual Rear Wheels, 7’-6” x 12’ Flatbed, A/C, Cruise, Tilt Steering

•CLARK NSP30 Fork Lift Truck, Stand Up Type, Electric, 3,000# Max. Capacity, 187” Max. Lift Height, 24-VDC, Charger, Overhead Guard, Forks, 2,955 Metered Hours, Extendable Forks, s/n NSP245-54-2332

CADILLAC STS-4 Sedan FORD Expedition Eddie Bauer SUV FORD Expedition XLT SUV

GMC C6500 Stake Truck GMC 3500HD Stake Truck TOYOTA 5FGC25 Forklift

2006 2004 2003

2001

PAID

$65,000PAID

$65,000

•CAT Model GC25 Fork Truck, LT, 5,000 lb. cap., s/n 4EM90354

•HYSTER Model H30XM, LP, 6,000 lb. cap., s/n D001H03416T

COMPRESSORS / DRYERS•2002 QUINCY QMB15ACA32SF Air Compressor,

Rotary Screw Type, 18,694 Hours, 15hp, Skid Mounted, Enclosed, s/n 87020

•2001 PNEUMATECH AD-75 Air Dryer, 75-SCFM; Approx. 300-Gallon Ver tical Receiving Tank, s/n 0108-T136268-ST

•2004 QUINCY QT5VT5HP00163 Air Compressor, Vertical Tank Mounted, 5hp, Piston Type, 80-Gallon Tank, s/n 20040507-0013

•QUINCY QSB25ACA32SQ Air Compressor, Rotary Screw Type, 36,391 Hours, 25hp, 125-PSI, Skid Mounted, Enclosed, s/n 99318H

•1997 PNEUMATECH ADA-80 Ari Dryer, 80-SCFM, 3/4hp Compressor, R-134A Refrigerant; Approx. 100-Gallon Vertical Receiving Tank

Qty. of CAT 50 Tool Holders QUINCY 25hp Air Compressor QUINCY 15hp Air Compressor

15 Ton Overhead Crane SHAW BOX 10 Ton Hoist PNEUMATECH AD-75 Dryer DAYTON Shot Blast

DUST HOG SC1700 Dust Collector DUST HOG Dust Collector Parts Bins Eyebolt & Chains

OVER 7AVAILABLE

OVER 600AVAILABLE

CRANES•UNKNOWN Bridge Crane, 15-Ton x 48” Span, Single

Girder, Top Riding; Stahl 15-Ton Electric Chain Hoist, 6-Way Controls, 80’ Craneway

•(OVER 7) Overhead Hoists, Up To 10 Ton

GENERAL EQUIPMENT•DAYTON 3Z850 Shot Blast Cabinet, 24” x 36” Sealed

Cabinet, Arm Holes, Viewplate, Light, Goodway Vacuum Dust Collector

•DUST HOG Dust Collector, Baghouse Type, On Stand•1999 DUST HOG SC1700 Dust Collector, Dust-Hog

Supra-Conic Indicator Panel, Magnehelic Gage; Dust-Hog F-5000 Mist Collector, s/n 60038503

•PEXTO 137-L Metal Shear, Manual, 16-Ga x 37” Capacity, Foot Power, s/n 9/68

•QUINCY 5105 Air Compressor, Horizontal Tank Mounted, 20hp, 2-Stage, 6” x 3½” x 3½” Size, 250-Gallon Tank, Thermal Transfer Air Cooled Dryer

•1994 HOBART Fabstar 4030 Welding Power Source, 400-Amps, Hobart 2210 Wire Feeder, s/n 294WS08784

•1991 HOBART Tigwave 250 AC/DC Welding Power Source, 250-Amps, Tig Torch, s/n 91WS19188

•JOHNSON GAS APPLIANCE CO. 175L Preheat Furnace, Thermostat, On Pedestal, Natural Gas Fired, 33,000-BTU’s Up-Acting Door

•JOHNSON GAS APPLIANCE CO. 70GL Heat Treat Furnace, Control Thermostat, On Pedestal, Natural Gas Fired, 78,000-BTU’s, Up-Acting Door

TERMS & CONDITIONSPAYMENT: MUST BE MADE IN FULL DAY OF SALE. PAYMENT IS CASH, CASHIER’S CHECK, CERTIFIED CHECK, WIRE TRANSFER, COMPANY CHECK ONLY IF ACCOMPANIED BY A LETTER FROM YOUR BANK GUARANTEEING AMOUNT OF CHECK FOR DEPOSIT AND/OR PAYMENT IN FULL. NO PERSONAL CHECKS. FULL PAYMENT MUST BE MADE BEFORE REMOVAL OF PURCHASE.REMOVAL: LAST DAY OF REMOVAL IS FRIDAY, JUNE 22, 2007 BY 5PM, AND AS FURTHER DEFINED IN THE SALE CATALOGUE. EVERYTHING IS SOLD “AS IS, WHERE IS”. SOME EQUIPMENT WILL BE REMOVED BY GUIDE CORP. SEE LOT CATALOGUE FOR DETAILS. ALL OTHER REMOVALS REQUIRE $2 MILLION LIABILITY INSURANCE. ALL SALES FINAL. COST AND RESPONSIBILITY FOR REMOVAL OF PURCHASE REMAINS WITH THE PURCHASER. EVERY EFFORT WILL BE MADE TO FACILITATE REMOVAL. WHILE QUANTITIES AND DESCRIPTIONS ARE BELIEVED TO BE ACCURATE, THE AUCTIONEER, OWNERS OR COUNSEL MAKE NO WARRANTIES OR GUARANTEES EITHER EXPRESSED OR IMPLIED AS TO AUTHENTICITY, GENUINENESS OF, OR DEFECTS IN ANY LOT AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES. NO WARRANTIES WHATSOEVER ARE MADE AS TO CONDITION, MERCHANTIBILITY OR FITNESS FOR USE OF ANY ITEM. MAY WE SUGGEST YOU TAKE FULL ADVANTAGE OF THE PREVIEW AND INSPECTION PERIOD. SALE SUBJECT TO ADDITIONS, DELETIONS & PRIOR SALE.

2002

MANUFACTURING SPACE FOR LEASE - FOR DETAILS CALL (616) 897-8977•MODERN Hydraulic Jacking System, 80,000 lb. max.

die weight, 3 1/8” stroke, s/n CAN-36-4184•JLG Electric Ladder

MATERIALS•(OVER 600) CAT 50 Tool Holders•(OVER 10) KURT Vices•(LARGE QTY.) Drills, Taps, Reamers, Work Benches,

Portable Tool Cabinets, Vices, Eye Bolts, Rigger Chains•(OVER 50 PAIRS) Steel Saw Horses•(LARGE QTY.) Hardware Including Screws, Nuts/Bolts,

Ladders, Shop Fans, Granite Plates, Die Springs, Collets, Gon Dumpers, Chainfalls, Hand Tools, Inspection Items, Calipers, Micrometers & Much More

PUBLIC AUCTIONPUBLIC AUCTIONPUBLIC AUCTION

683 LINCOLN LAKE AVE. SELOWELL, MI 49331

THURSDAY, JUNE 7TH 2007 @ 10:00 AM

Industries (1991) Inc.

21700 Northwestern Hwy.Suite 1180Southfield MI 48075www.maynards.comTel: (248) 569-9781Fax: (248) 569-9793Auctions • Liquidations • Appraisals

Maynards Industries (1991) Inc. 250 H Street PMB 207 Blaine WA 98230

THURSDAY, JUNE 7TH 2007 @ 10:00 AM

THURS, JUNE 7TH/07Preview: Wednesday, June 6 from 9am-4pm

10:00 AM

WELL-MAINTAINEDTOOL & DIE FACILITY

683 LINCOLN LAKE AVE. SELOWELL, MI 49331

Maynards specializes in asset conversion of Industrial Equipment and Commercial InventoriesWe offer: Cash • Guarantees • Commission • Confidential Appraisals

Idle Assets?Idle Assets?

5 Offices To Serve You www.maynards.com

VERSON S4-600-156-96T Straight Side Press

MIGHTY VIPER VMC3000GXT VMC

TAYLOR TC-300S ForktruckBUYERS PREMIUMS: 10% ON-SITE, 13% ON-LINE

Bid from the comfort of your office, in real time via the internet.To register visit: www.bidspotter.com

Unable to Attend?

683 LINCOLN LAKE AVE. SE, LOWELL, MI 49331SALE SITE IS LOCATED APPROXIMATELY 20 MILES

NE OF GRAND RAPIDS, MI AND APPROXIMATELY 50 MILES NW OF LANSING, MI

1999

2005

COMPLETELY REBUILTIN 2001

ROLLINGBOLSTER

WINDOWS