Peugeot 607 Owners Manual 2003

YOUR AT A GLANCE 1

Each model may only be fitted with some of the equipment shown, according to its specification and the technicalrequirements in the country of first registration of the vehicle.

PagesChecks 149-150Changing a bulb 155-157Access 116-118Fuel filler flap 119Changing a wheel 152-154

PagesSeats 101-110Steering wheel controls 120-123Instrument dials 28-29Automatic air conditioning 98-100Mirrors 128-129

23-06-2003

23-06-2003

YOUR AT A GLANCE2

23-06-2003

3YOUR AT A GLANCE

1 - Lights and direction indicators

stalk.

2 - Steering wheel adjustment.

3 - Driver's front air bag.

- Horn.

4 - Instrument dials.

5 - Windscreen wash/wipe stalk.

- Trip computer stalk.

6 - Audio remote control stalk.

7 - Hazard warning lights

switch.

8 - Central adjustable

air conditioning/ ventilation

vents and air flow regulation.

9 - Sunshine / brightness

sensor.

10 - Windscreen demisting vents.

11 - Passenger air bag.

12 - Glove compartment.

13 - Side adjustable

air conditioning/ ventilation

vents and air flow regulation.

14 - Door window demisting vent.

15 - Passenger air bag disarming

switch.

16 - Front seats heating switch.

17 - Rear ashtray.

- Rear lighter.

- Rear seats heating switches.

18 - Rear footwell air conditioning

vent.

19 - Two-position armrest with

compartments.

20 - Handbrake.

21 - Electronically controlled

suspension switch.

- Doors and boot locking

switch.

- Sunroof switch.

- Rear blind switch.

22 - Front ashtray.

- Front lighter.

23 - Gear lever.

24 - RM2 audio system or RT2

audio/telephone system with

PEUGEOT call button.

25 - Air conditioning controls.

26 - Multi-function display.

27 - Steering lock and ignition.

28 - Fuse box.

29 - Speakers location.

30 - Electric mirror controls.

- Window controls.

- Rear window locking control.

31 - Headlamp height adjustment.

32 - ESP disarming switch.

33 - Alarm button.

34 - Cruise control.

35 - Memory buttons for:

- Front seat settings

- Electric mirror settings

23-06-2003

YOUR AT A GLANCE10

"PORSCHE TIPTRONIC System"AUTOMATIC GEARBOX

The four speed automatic gearbox offers a choice between the comfortof integral automatic operation , enhanced by a sport programme anda snow programme, or the pleasure of manual gear changing .

Gear selection gate☞ Move the lever in the gate to select one of the functions.

Once the function is selected, the indicator light for that function is displayed on the instrument panel screen.

S: sport programme.

�: snow programme.

Park: to immobilise the vehicle and to start the engine ,with the handbrake on or off.

Reverse: to engage reverse ; select this function withthe vehicle stationary and the engine at idle.

Neutral: to start the engine and to park , with thehandbrake on.Note: if position N is engaged by mistake while thecar is moving, allow the engine to return to idlingspeed before engaging function D to accelerate.

Drive: for automatic gear changing

Manual: for manual gear changing.

To change the four gears manually:

☞ Push the lever to the + symbol to change up tothe next gear and pull it towards the - symbol tochange down a gear.

Note: the S (sport) and � (snow) programmes donot operate in manual mode.

Moving Off

With the engine running, to moveoff from position P:☞ it is essential to press the

brake pedal to exit positionP,

☞ select function R, D or M, thengradually release the pressureon the brake pedal; the vehiclewill move off immediately.

You can also move off from position N:☞ release the handbrake, with

your foot on the brake,☞ select function R, D or M, then

gradually release the pressureon the brake pedal; the vehicle will move offimmediately.

WARNINGWhen the engine is idling with thebrakes not applied, if function R, Dor M is selected, the vehiclemoves without the acceleratorbeing pressed.For this reason, do not leavechildren unsupervised insidethe vehicle, with the enginerunning.When maintenance operationshave to be carried outwith the enginerunning, apply thehandbrake and selectposition P.

134

23-06-2003

YOUR 607 IN DETAIL101

THE SEATSManual front seats1 - Forwards-backwards adjustment

Lift the lever and slide the seat forwards or backwards.2 - Seat cushion angle adjustment *

Raise the catch while pressing on or easing off theseat back to obtain the required height.

3 - Driver's seat height adjustment*Raise the catch to obtain the required height.

4 - Seat back angle adjustmentRaise the catch to obtain the required angle.

5 - Lumbar adjustment *Raise or lower the lever to obtain the correct position.

6 - Head restraint height adjustmentThe head restraint has a frame with notches whichprevent the head restraint dropping down (safetydevice in the event of an impact). To raise the head restraint, push it upwards.

The setting is correct when the upper edge of thehead restraint is level with the top of the head.

To lower the head restraint, it is necessary to pushsimultaneously :– the button located on the base of the head restraint frame,– the head restraint downwards.To remove the head restraint, lift it out by pressing the lug.

Warning : never drive with the head restraints removed; theymust be in place and correctly adjusted.

* Driver's seat only.

23-06-2003


Memorising using the buttons

To memorise:

☞ Place the ignition key in the 'run-ning' position (2nd notch),

☞ Adjust your seat and mirrors,

☞ Press button M, then button 1(first driving position) or button 2(second driving position) withinfour seconds.

An audible signal confirms that aposition has been memorised.

Memorising a new position cancelsthe previous one.

Recalling a memorised position

Engine off

☞ Briefly press button 1 or 2 to recallthe corresponding memorisedposition. The end of the setting isindicated by a bleep.

Note: after recalling a memorisedposition five times in succession, thefunction will be cancelled until theengine is started.

Engine running

☞ Keep button 1 or 2 pressed downuntil the bleep indicates the end ofsetting of the corresponding mem-orised position.

Memorising seat and mirror positions

Four driving positions can be memo-rised:– two, using two remote control

keys (two users) ,– two, using buttons M/1 and M/2.

Driving positions memorised bythe remote control key

When locking the doors, the remotecontrol key memorises the positionof the driver's seat and the exteriormirrors.

When unlocking the doors, the dri-ver's seat and the exterior mirrorsresume the position memorised bythe remote control key if this haschanged in the meantime.

Each remote control key canmemorise a specific setting.

Front and rear heated seats controls

☞ Press the switch. The tempera-ture is regulated automatically.

☞ Press it again to stop operation.

Note: the command to activate heat-ing of the seat(s) remains in thememory for two minutes after theignition is switched off.

23-06-2003


Electric front seats

A - Forwards-backwards adjustmentPush the control forwards or backwards to slide theseat.

B - Seat cushion angle adjustmentTilt the front of the control upwards or downwards toobtain the required angle.

C - Seat height adjustmentTilt the rear part of the control upwards or downwardsto obtain the required height.

D - Seat back angle adjustmentTilt the control to the front or the rear to obtain the cor-rect angle.

E - Lumbar adjustment (mechanical adjustment)Raise or lower the lever to obtain the correct position.

F - Head restraint height adjustmentTilt the control upwards or push it downwards to obtainthe correct height.

The setting is correct when the upper edge ofthe head restraint is level with the top of thehead.

The head restraint angle is also adjustable manually.

To remove the head restraint, tilt the seat back to 45°and place the head restraint in the high position, thenpull with both hands.

Note: the electrical functions of the driver's seat are inoper-ative three minutes after the ignition has been switched off.

23-06-2003


Memorising using the buttons

To memorise:

☞ Place the ignition key in the 'run-ning' position (2nd notch),

☞ Adjust your seat and mirrors,

☞ Press button M, then button 1(first driving position) or button 2(second driving position) withinfour seconds.

An audible signal confirms that aposition has been memorised.

Memorising a new position cancelsthe previous one.

Recalling a memorised position

Engine off

☞ Briefly press button 1 or 2 to recallthe corresponding memorisedposition. The end of the setting isindicated by a bleep.

Note: after recalling a memorisedposition five times in succession, thefunction will be cancelled until theengine is started.

Engine running

☞ Keep button 1 or 2 pressed downuntil the bleep indicates the end ofsetting of the corresponding mem-orised position.

Memorising seat and mirror positions

Four driving positions can be memo-rised:– two, using two remote control

keys (two users) ,– two, using buttons M/1 and M/2.

Driving positions memorised bythe remote control key

When locking the doors, the remotecontrol key memorises the positionof the driver's seat and the exteriormirrors.

When unlocking the doors, the dri-ver's seat and the exterior mirrorsresume the position memorised bythe remote control key if this haschanged in the meantime.

Each remote control key canmemorise a specific setting.

Front and rear heated seats controls

☞ Press the switch. The tempera-ture is regulated automatically.

☞ Press it again to stop operation.

Note: the command to activate heat-ing of the seat(s) remains in thememory for two minutes after theignition is switched off.

23-06-2003


REAR SEATS

Rear seat

The seat back in the rear is foldeddown in two parts.

Before folding down the seat back:

☞ lock the side seat belts.

Note: Before folding down the 2/3 part of the seat back, release thelap belt strap by pressing the blackbutton of the lock.

Front armrest

To obtain a resting or driving posi-tion:

☞ Lift the centre handle 1 and pullthe armrest forwards. To return tothe initial position, push the arm-rest backwards.

To open the lower compartment:

☞ Raise the left handle 2. CDs andcoins can be stored here.

To open the top compartment:

☞ Raise the right handle 3.

To fold down the seat back

The unlocking controls are located inthe boot.

☞ pull the control corresponding tothe part of the seat back that youwish to fold down.

It is also possible to unlock from insi-de the vehicle:

☞ lower the armrest and open theski flap,

☞ pull the button located on theunlocking housing correspondingto the part of the seat back thatyou wish to fold down.

When putting the seat back to its ori-ginal position, for your safety makesure that it is correctly locked.

23-06-2003


Ski flap

☞ Lower the armrest to access theski flap. Open by pulling the han-dle.

23-06-2003


Rules for transporting childrenon the front passenger seat**

Children under the age of 10 mustnot travel in the forwards facingposition, unless the rear seats arealready occupied by other childrenor the rear seats cannot be used(absent or folded). In this case,adjust the front passenger seat tothe most rearward position andleave the passenger air bag armed.The transportation of children in therearwards facing position is permit-ted. In this position, it is essential todisarm the passenger air bag.Otherwise, the child would risk beingkilled or seriously injured if the airbag were to inflate.

GENERAL POINTS RELATING TO CHILD SEATS

Although one of PEUGEOT's main criteria when designing your vehicle, the safe-ty of your children also depends on you.For maximum safety, please follow these precautions:

- Since 1992, all children under the age of 10 must travel in approved childseats* suited to their weight , on seats fitted with a seat belt.In order to recognise a child seat which conforms to current legislation, checkthat it bears an orange label indicating the weight range for its use andits approval number.

- A child weighing less than 9 kg must travel in the rearwards facing position both in the front and in the rear. PEUGEOT recommends thatchildren should travel in the "rearwards facing" position up to the age oftwo.

- Statistically, the safest seats in your vehicle for the transportation of children are the rear seats. PEUGEOT recommends that children travel inthe rear even when a "rearwards facing" child seat is used.

- If a child is travelling on a booster seat, check that the lap section of the seatbelt passes over the child's thighs correctly. The chest section of the seat belt must be positioned on the child's shoulder without touching the neck. PEUGEOT recommends that you use a booster seat with a back, fitted with aseat belt guide.

- Remember to fasten the seat belt or the child seat harness keeping the slackin relation to the child's body to a minimum , even for short journeys.

* According to current legislation in the country.** Consult the relevant administration in your country for information regarding

the rules for transporting children on the front passenger seat.

23-06-2003


"ISOFIX" MOUNTINGSThe one third side of the rear seat ofyour vehicle is fitted with ISOFIXmountings . These are 2 rings loca-ted between the seat back and seatcushion of your vehicle.The ISOFIX child seats are fittedwith 2 locks which fit onto theserings.

The ISOFIX child seat approved forPEUGEOT vehicles and sold by thePEUGEOT network is the ISOFIXKIDDY* child seat. It can be installedin the rearwards facing position frombirth to 13 kg and in the forwardsfacing position from 9 to 18 kg.In the front, in the rearwards facingposition, the front passenger seatmust be moved as far forwards aspossible so that the shell of the childseat is in contact with, or as close aspossible to, the fascia.In the rear, in the forwards facingposition, the front passenger seatmust be in the intermediate longitudi-nal position, with the seat backupright.

The ISOFIX KIDDY child seat mayalso be used where there are no Iso-fix mountings. In this case it is com-pulsory to attach it to the vehicle'sseat using the three-point seat beltfor both the rearwards facing and for-wards facing positions.

If the ISOFIX KIDDY seat is fittedin the rearwards facing positionon the front passenger seat, it isessential to disarm the passengerair bag.

Follow the instructions for fittingthe child seat indicated in the seatmanufacturer's installation ins-tructions.

Refer to the "Summary table for theinstallation of child seats".

* You can only secure ISOFIX childseats, approved by PEUGEOT andsold by its network, on your vehi-cle's ISOFIX mountings.

23-06-2003


CHILD SEATS RECOMMENDED BY PEUGEOTIn addition to the ISOFIX child seats, PEUGEOT offers a complete range of child seats which are secured using the seatbelt:These child seats have been assessed in impact conditions in PEUGEOT vehicles and guarantee optimum safety for yourchildren:

Group 0+: from birth to 13 kg

L1 - "Britax Babysure": installed in the rear-facing position using a three-point seat belt.In the front, it is compulsory to disarm the passenger air bag.

Group 1: from 9 to 18 kg

L2 - "Römer Prince": installed using a two or three-point seat belt. For the safety of your child, the seat and the restraining cushion must never be separated.

Group 2: from 15 to 25 kg

L3 - "Römer Vario'': installed using a two or three-point seat belt.

23-06-2003

Never leave one or morechildren alone and unsu-pervised in a vehicle.Never leave a child or an

animal in a vehicle which is exposedto the sun and has the windows clo-sed.To protect your young children fromthe sun, fit blinds on the rear win-dows.Never leave the keys within reach ofchildren inside the vehicle.

Disarm the passenger air bag wheninstalling a "rearwards facing" childseat on the front passenger seat.Otherwise, the child would risk beingkilled or seriously injured were the airbag to inflate.Observe strictly the recommenda-tions for assembling and securingthe child seat as shown in the childseat instructions.To prevent the doors from openingaccidentally, use the child lock*.Also, do not open the rear windowsmore than a third*.

* According to model.


Groups 2 and 3: from 15 to 36 kg

L4 - "Recaro Start'': installed using a three-point seat belt.The height and width of the seat back and length of the seat cushion mustbe adjusted according to the age and build of your child.

L5 - "Klippan Optima": installed using a three-point seat belt. From the age of 6 years (approximately 22 kg), the booster is used on itsown.

Refer to the "Summary table for the installation of child seats".

23-06-2003

SUMMARY TABLE FOR THE INSTALLATION OF CHILD SEATSIn accordance with European regulations (Directive 2000/3), the table below indicates the extent to which each seat in yourvehicle may be fitted with a child seat which is secured using the seat belt and is universally approved (seat which can beinstalled with all seat belts, in all vehicles) for one or more weight groups:

U : seat suitable for the installation of a universal child seat, "rearwards facing" and a universal child seat, "forwards facing".U (R) : universal child seat, rearwards facing and forwards facing, set in the highest position.X : no child seatAccording to destination:L1 : BRITAX Babysure E11 0344117 Universal (birth to 13 kg).L2 : RÖMER Prince E1 03301058 Universal (9 to18 kg).L3 : RÖMER Vario E1 03301120 Universal (15 to 25 kg).L4 : RECARO Start E1 03301108 Universal (15 to 36 kg).L5 : KLIPPAN Optima E17 030007 Universal (15 to 36 kg).L6 : KIDDY Isofix Rearwards facing (c) E1 03301123 and Universal (birth to 13 kg).L7 : KIDDY Isofix Forwards facing (c) E2 030011 Universal (9 to 18 kg).(a) Group 0: from birth to 10 kg.(b) Consult the current legislation in your country. (c) See section "Seats - Isofix mountings" for use of the KIDDY child seat on the vehicle's Isofix mountings.

Statutory weight range Seat Group 0(a) to 0+ Group 1 Group 2 Group 3

< 13 kg 9 - 18 kg 15 - 25 kg 22 - 36 kg

Front passenger seat (b)without booster L1, L6 L2, L7 L3, L4, L5 L4, L5

Front passenger seat (b) U (R) U (R) U (R) U (R)with booster (R) L1, L6 L2, L7 L3, L4, L5 L4, L5

Rear side U U U Useat L1, L6 L2, L7 L3, L4, L5 L4, L5

Rear centre X X L3, L4, L5 L4, L5seat


23-06-2003

CRUISE CONTROL

Cruise control enables the vehicleto maintain a steady speedprogrammed by the driver, irres-pective of the road conditions andwithout the accelerator or brakepedal being pressed.

In order for it to be memorised, thespeed of the vehicle must begreater than 25mph (40km/h) or40mph (60km/h), depending onengine, with at least 4th gearengaged (2nd gear for the auto-matic gearbox).

Operation

☞ Place the ring of stalkA in the ON position.The indicator lightcomes on, accompa-nied by an audiblesignal.

FRONT AIR BAGS

Disarming the passenger air bag* ☞ with the ignition off, insert the

key into slot 1 and turn it:– to the 'ON' position, the

passenger air bag is armed,– to the 'OFF' position, the

passenger air bag is disarmed.

Operating check

When the passenger airbag is disarmed, the war-ning light comes on whenthe ignition is switched on(2nd notch), accompanied

by an audible signal and the mes-sage 'Passenger air bag deacti-vated' .

Front air bag fault

If this warning lightcomes on, accompaniedby an audible signal andthe message 'Air bag

fault' , contact a PEUGEOT dealerto have the system checked.

Passenger air bag precautions

☞ Disarm theair bag ifyou installa rear-facing childseat.

☞ Arm the airbag for anadult pas-senger.

Never place your feet or anyobject on the fascia.

* According to country

YOUR AT A GLANCE 11

139 141

23-06-2003


SEAT BELTS

Front seat belt height adjustment :

☞ To lower the attachment point,squeeze control 1 and slide itdownwards.

☞ To raise the attachment point,squeeze control 1 and slide itupwards.

To lock the seat belts

☞ Pull the strap, then insert the endinto the buckle.

Front seat belts with pre-tensioner and force limiterSafety in the event of a frontal impacthas been improved by theintroduction of seat belts with pre-tensioner and force limiter connectedto the front air bags. Depending onthe seriousness of the impact, thepre-tensioning system instantlytightens the seat belts firmly againstthe bodies of the occupants.The pre-tensioning seat belts arearmed when the ignition is on.The force limiter reduces thepressure of the seat belt on the bodyof the occupant in the event of anaccident.

Rear seat belts with force limiter

The rear seats are all fitted with athree-point inertia reel seat belt.

Third rear central seat belt- pull the belt located between the

two head restraints at the left rear,- insert the fixed buckle in the black

clasp located on the left,- insert the sliding buckle in the red

and black (movable) clasp.To release it, press the black buttonof the locking clasp.

To be effective, a seatbelt must be tightened asclose to the body as pos-sible.

Depending on the nature andseriousness of the impact, thepre-tensioners may be triggeredbefore and independently of theair bags.In all cases, the air bag warninglight comes on.After an impact, have the systemchecked by a PEUGEOT dealer.

23-06-2003


THE REMOTE CONTROL KEYFrom the driver's door, the keyallows you to lock or unlock thedoors, the boot and the fuel filler flap,as well as to fold back and unfold theexterior mirrors.The remote control in the key per-forms the same functions at a dis-tance.If one of the front doors or the boot isopen, the central locking does notfunction.

Selective unlocking with theremote control keyThis function must be initialised by aPEUGEOT dealer.Press button B to unlock the driver'sdoor as well as to fold out the exteri-or mirrors.Press button B again to unlock theother doors, the boot and the fuelfiller flap.

Folding/opening out the key

To tuck away the key blade, fold itdown into the remote control module.To open out the key, press button D.

DeadlockingThis renders the internal and exter-nal door controls inoperative, andenables automatic closing of the win-dows and the sunroof.

With the key☞ Lock the vehicle and keep the key

in the locking position for approxi-mately one second.

With the remote control incorpo-rated in the key☞ Press button A once to lock the

vehicle (the direction indicatorscome on for approximately twoseconds).

☞ Within a maximum of five sec-onds, press button A a secondtime to deadlock the vehicle (thedirection indicators come on forapproximately two seconds).

Unlocking with the remotecontrol key☞ Press button B.

This is confirmed by rapid flashing ofthe direction indicators.

Locking with the remote control key☞ Press button A.

This is confirmed by fixed lighting ofthe direction indicators for approxi-mately two seconds.If one of the doors or the boot isopen, the central locking does notfunction.

Note: the function that controls fold-ing back of the exterior mirrors canbe disarmed by a PEUGEOT dealer. Opening the boot with the

remote control key☞ Press and hold button C.Note: this also unlocks the doors orthe driver's door only, if selectiveunlocking is initialised.

23-06-2003


Electronic engine immobiliserThis locks the engine control systema few moments after the ignition hasbeen switched off and therefore pre-vents starting of the vehicle by any-one who does not have the key.

The ignition key has an electronicchip which has a special code. Whenthe ignition is switched on, the codeis recognised and starting is possi-ble.

If the system does not functioncorrectly, the central locking buttonindicator light, situated on the centreconsole, flashes rapidly when theignition is switched on (2nd notch).

WARNING: your vehicle is no longerprotected in this event.

Contact a PEUGEOT dealer as soonas possible.

Flat battery (CR 2025/3 volt battery)This is indicated by illumination of awarning light on the instrument paneldisplay, accompanied by an audiblesignal and a message on the multi-function display.Contact a PEUGEOT dealer toreplace the battery.

Key in ignition

A buzzer sounds on opening the dri-ver's door, if the key has been left inthe ignition.

Locating your vehicle

To locate your vehicle, if you havelocked it, in a car park:

☞ press button A, the courtesy lightscome on and the direction indicators flash for a few seconds.

CONFIDENTIAL CARD

The confidential card contains theidentification code necessary for anywork carried out by a PEUGEOTdealer on the system. This code ishidden by a film, which should beremoved only if necessary.

Keep your card in a safe place,never inside the vehicle.

Programming the remotecontrol ☞ Switch off the ignition.

☞ Switch the ignition on again.

☞ Press button A immediately.

☞ Switch off the ignition and removethe remote control key from theignition lock. The remote controlis now working again.

23-06-2003

Make a careful note of the number on each key. The key number is coded on the label attached to the key.If the keys are lost, your PEUGEOT dealer can rapidly supply you with new keys.The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is apossibility that it may unlock your vehicle, without you being aware of it.

The remote control does not operate when the key is in the ignition, even when the ignition is switched off, except forreprogramming.However, do not operate the deadlocking function if there is anyone inside the vehicle.Driving with the doors locked may make access to the passenger compartment by the emergency services more difficultin an emergency.As a safety precaution (with children on board), remove the ignition key when you leave the vehicle, even for a short time.Do not repeatedly press the button of your remote control out of range of your vehicle.You run the risk of stopping it from working and the remote control would have to be reprogrammed.

When purchasing a second-hand vehicle:- ensure that you are given the confidential card;- have the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only ones

which can start the vehicle.Do not make any modifications to the electronic engine immobiliser system.


23-06-2003


Electronic engine immobiliserThis locks the engine control systema few moments after the ignition hasbeen switched off and therefore pre-vents starting of the vehicle by any-one who does not have the key.

The ignition key has an electronicchip which has a special code. Whenthe ignition is switched on, the codeis recognised and starting is possi-ble.

If the system does not functioncorrectly, the central locking buttonindicator light, situated on the centreconsole, flashes rapidly when theignition is switched on (2nd notch).

WARNING: your vehicle is no longerprotected in this event.

Contact a PEUGEOT dealer as soonas possible.

Flat battery (CR 2025/3 volt battery)This is indicated by illumination of awarning light on the instrument paneldisplay, accompanied by an audiblesignal and a message on the multi-function display.Contact a PEUGEOT dealer toreplace the battery.

Key in ignition

A buzzer sounds on opening the dri-ver's door, if the key has been left inthe ignition.

Locating your vehicle

To locate your vehicle, if you havelocked it, in a car park:

☞ press button A, the courtesy lightscome on and the direction indicators flash for a few seconds.

CONFIDENTIAL CARD

The confidential card contains theidentification code necessary for anywork carried out by a PEUGEOTdealer on the system. This code ishidden by a film, which should beremoved only if necessary.

Keep your card in a safe place,never inside the vehicle.

Programming the remotecontrol ☞ Switch off the ignition.

☞ Switch the ignition on again.

☞ Press button A immediately.

☞ Switch off the ignition and removethe remote control key from theignition lock. The remote controlis now working again.

23-06-2003

Make a careful note of the number on each key. The key number is coded on the label attached to the key.If the keys are lost, your PEUGEOT dealer can rapidly supply you with new keys.The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is apossibility that it may unlock your vehicle, without you being aware of it.

The remote control does not operate when the key is in the ignition, even when the ignition is switched off, except forreprogramming.However, do not operate the deadlocking function if there is anyone inside the vehicle.Driving with the doors locked may make access to the passenger compartment by the emergency services more difficultin an emergency.As a safety precaution (with children on board), remove the ignition key when you leave the vehicle, even for a short time.Do not repeatedly press the button of your remote control out of range of your vehicle.You run the risk of stopping it from working and the remote control would have to be reprogrammed.

When purchasing a second-hand vehicle:- ensure that you are given the confidential card;- have the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only ones

which can start the vehicle.Do not make any modifications to the electronic engine immobiliser system.


23-06-2003


THE ALARM

This provides two types of protec-tion, exterior and interior:– exterior protection: when this is

set, the alarm sounds if a door, theboot or the bonnet is opened.

– interior protection: when this is set,the alarm sounds if the sensorsdetect a variation in the air move-ment inside the vehicle (breakingof a window or a movement insidethe vehicle).

Setting the alarm☞ Switch off the ignition and get out

of the vehicle.

☞ Set the alarm within five minutesof getting out of the vehicle, bylocking or deadlocking using theremote control (button B indicatorlight flashes once per second).

Note: if you wish to lock your vehiclewithout setting the alarm, use thedoor lock.

When the alarm is triggered, thesiren sounds and the direction indi-cators flash for thirty seconds.

It then stops, but the alarm remainsset.

Warning: if the alarm has been trig-gered ten times in succession, onthe eleventh time it becomes inac-tive.

Note: if button B flashes rapidly, thealarm has been triggered while youwere away from your vehicle.

Automatic activation

The alarm is activated automaticallytwo minutes after the door or bootwere last closed.

In order to avoid accidental triggeringof the alarm when a door or the bootis opened, it is essential to press theremote control opening button first.

Disarming

Unlock the vehicle with the remotecontrol key (button B indicator lightgoes out).

Note: if the alarm has been triggeredwhile you were away from your car,the rapid flashing of the indicatorlight will stop when you switch on theignition.

To set the alarm with exteriorprotection only

If, while you are away from the vehi-cle, you wish to leave a window par-tially open or a pet inside the vehicle,you should choose exterior protec-tion only.

☞ Switch off the ignition

☞ In the next ten seconds, pressbutton A until indicator light B ison continuously.

☞ Get out of the vehicle.

☞ Set the alarm by locking or dead-locking using the remote controlswitch (button B indicator lightflashes once a second).

Note: when the alarm is set but theremote control does not operate:

☞ Unlock the doors with the key andopen the door. The alarm is trig-gered.

☞ Switch on the ignition in the nextten seconds. The alarm is disar-med.

Incorrect operation

When the ignition is switched on, ifbutton B lights for ten seconds, thereis a fault in the siren connection.

Contact a PEUGEOT dealer to havethe system checked.

23-06-2003


Closing the boot lid

Press the push button C to start elec-tric closing of the boot lid.

Note: do not hinder closing of theboot lid: any obstacle to closingcauses the boot lid to stop and rise afew centimetres automatically.

When opening or closing the boot,ensure that no-one is close to therear of the vehicle to avoid the riskof injury.

'Boot open' warningWith the ignition on (2nd notch), withthe engine running or when thevehicle is moving, the door openwarning light comes on, accompa-nied by an audible signal and a diagram on the multi-function display, if the boot is not properlyclosed. To close the boot lid manually, pressthe centre until it locks.

Stopping and intermediateposition of the boot lid

While electric opening or closing ofthe boot lid is in progress, you canstop its movement at any time.☞ press the push-button B or C on

the boot lid.or☞ press button A on the remote

control.When it is stopped, the boot lid isheld in an intermediate position elec-trically for approximately 10 minutes.After this time, the system switchesto standby and releases the boot lid.Note: to leave the intermediate position, start an electric opening orclosing operation or move the bootlid manually.

THE ELECTRIC BOOT

Opening the boot

With the vehicle locked / deadlocked

☞ Press and hold button A of theremote control key.

This action will also unlock the doorsand the fuel filler flap.

Vehicle unlocked

☞ Press and hold button A of theremote control key, or press andhold push-button B on the boot lid.

Note: the push button B is disarmedautomatically when driving at 6 mph (10 km/h) and reactivates when stationary, when a door is opened.

23-06-2003


BONNET

Opening

☞ Pull the lever, located in the driver'sfootwell, downwards.

☞ Lift the catch and raise the bonnet.Bonnet assister struts open the bon-net and keep it open.

Closing

☞ Lower the bonnet and release it atthe end of its travel.

☞ Check that it is locked.

'Bonnet open' warning With the ignition on (2nd notch), withthe engine running or when thevehicle is moving, the door openwarning light comes on, accompa-nied by an audible signal and a dia-gram on the multi-function display, ifthe bonnet is not properly closed.

• safety auto-reverse (on slidingonly)When the sunroof is closing andmeets an obstacle, it stops thenpartially opens again.

In the event of unwanted opening ofthe sunroof on closing, press part Bof the switch until the sunroof is fullyopen. As soon as the sunroof stops,press part A of the switch until thesunroof is fully closed.

The safety auto-reverse functionis not operational during this ope-ration.

Note: the sunroof shutter is manual.

Always remove the keyfrom the ignition when leaving the vehicle, even fora short time.

In the event of contact when opera-ting the sunroof, you must reversethe movement of the sunroof. To dothis, press the switch concerned.When the driver operates the sun-roof switch, he must ensure that noone is preventing correct closing ofthe sunroof.The driver must ensure that passengers use the electric sunroofcorrectly.Be aware of children when operatingthe sunroof.

SUNROOF

Control the sunroof:

- manually: lightly press the switch;the roof stops as soon as the switchis released.

- automatically: press the switchdown fully; the roof opens or closescompletely depending on where theswitch is pressed.

• to partially open the roof: presspart A of the switch. To close it,press part B of the switch.

• to open the roof completely:press part B of the switch.

• to close it completely: press partA of the switch.

23-06-2003

The engine and the ignition mustbe switched off when filling withfuel :☞ Open the fuel filler flap by press-

ing its front right hand edge,☞ Unscrew the cap and hook it over

the tab located on the inside of theflap.

When filling up your tank, do not con-tinue after the 3rd cut-off of thepump; this could cause your vehicleto malfunction.The capacity of the tank is approx-imately 80 litres.☞ After filling the tank, screw the cap

on fully and close the flap.

Fuel filler cap openWhen this light comes on,accompanied by an audiblesignal and the message'Fuel cap open' on the dis-play, screw the cap on again

and close the fuel filler flap.

FILLING WITH FUEL

Low fuel levelWhen the minimum fuellevel is reached, this warn-ing light comes on, accom-panied by an audible signaland the message 'Fuel

level low' on the multi-function dis-play.You can can still drive approxi-mately 30 miles (50 km) withoutfilling up with fuel.

Filling with fuel

Locking and unlocking of the fuelfiller flap, the doors and the boot issimultaneous (except when selectiveunlocking is initialised; in this casepress the unlocking button of theremote control again).


23-06-2003

No. Symbol Function

1 Air conditioningon/off.

2 Front visibilityprogramme.

3 Air intake/recirculation control.

4 Rear screendemisting.

5Switchingoff.

6 Passenger setting

7 Passenger comfortprogramme.

8 Passengerair distributionsetting.

9 Air flowadjustment.

10 Driverair distributionsetting.

11 Driver comfortprogramme.

12 Driversetting.

12 YOUR AT A GLANCE

AUTOMATIC AIR CONDITIONING

Do not cover the sunshine / brightness sensor located in thecentre of the fascia.

It helps to regulate the air conditioning, automatic switching on of the lights and the automatic adjustmentof the instrument panel brightness.

98

23-06-2003


Direction indicators (flashers)

Left : downwards.Right : upwards

Note : If you forget to return thedirection indicator to its normal posi-tion, the volume of the audible signalwill increase, if you are driving at aspeed greater than 40 mph (60 km/h).

Parking lightsThe parking lights are lit on the sidethe traffic is on.With the engine switched off, placethe indicator lights stalk on the trafficside (i.e. for parking on the right;switching on of the lights on the left).

Dipped / main beam change

☞ Pull the stalk fully towards you.

Note : with the ignition and the auto-matic lights function switched off, onopening the driver's door a buzzersounds if you have left your lights on.

Front and rear fog lamps (ring B)

☞ Turn ring B to the positionrequired. The position is con-firmed by the light on the instru-ment panel.

Front foglamps

These operate with the side lights andthe dipped / main beam headlamps.

Neutral position.

Rear fog lamps

These operate with the side lightsand the front fog lamps, or thedipped / main beam headlamps.

LIGHTS STALK

Front and rear lights (ring A)

☞ Turn ring A to the positionrequired.

Lights off

Side lights

Dipped / main beamheadlamps

23-06-2003


Automatic switching on of the lights

Side lights and dipped beam head-lamps switch on automatically if thelight is poor, or during continuousoperation of the windscreen wipers.They switch off as soon as the lightbecomes bright enough or the wind-screen wipers stop.

Note : in foggy weather, the bright-ness sensor can detect sufficientlight. As a consequence, the lightswill not come on automatically.

This function is active when the vehi-cle is supplied to the customer.

To switch the function on or off:

☞ Place the key in the accessoriesposition (1st notch),

☞ Change the stalk position to 0,

☞ Press the end of the stalk for morethan two seconds.

Note : after the ignition is switchedoff and depending on the brightness,the lights remain on for approximate-ly thirty seconds or until the vehicle islocked.

Do not cover the sunshine /brightness sensor located in thecentre of the fascia. It helps toregulate the air conditioning,automatic switching on of thelights and the automatic adjust-ment of the instrument panelbrightness.

Operating check

Activation

When this function is acti-vated, the indicator lightcomes on, accompanied byan audible signal.

The light also comes on as soon asthe driver changes the stalk positionto 0.

Neutralisation

When neutralising the func-tion, the indicator lightcomes on, accompanied byan audible signal.

The indicator light also comes on assoon as the driver uses the manuallighting controls.

If the sunshine / brightness sen-sor does not function correctly,the system activates the function(the lights come on) and the dippedbeam headlamps indicator light onthe instrument panel flashes.


23-06-2003


Automatic switching on of the lights

Side lights and dipped beam head-lamps switch on automatically if thelight is poor, or during continuousoperation of the windscreen wipers.They switch off as soon as the lightbecomes bright enough or the wind-screen wipers stop.

Note : in foggy weather, the bright-ness sensor can detect sufficientlight. As a consequence, the lightswill not come on automatically.

This function is active when the vehi-cle is supplied to the customer.

To switch the function on or off:

☞ Place the key in the accessoriesposition (1st notch),

☞ Change the stalk position to 0,

☞ Press the end of the stalk for morethan two seconds.

Note : after the ignition is switchedoff and depending on the brightness,the lights remain on for approximate-ly thirty seconds or until the vehicle islocked.

Do not cover the sunshine /brightness sensor located in thecentre of the fascia. It helps toregulate the air conditioning,automatic switching on of thelights and the automatic adjust-ment of the instrument panelbrightness.

Operating check

Activation

When this function is acti-vated, the indicator lightcomes on, accompanied byan audible signal.

The light also comes on as soon asthe driver changes the stalk positionto 0.

Neutralisation

When neutralising the func-tion, the indicator lightcomes on, accompanied byan audible signal.

The indicator light also comes on assoon as the driver uses the manuallighting controls.

If the sunshine / brightness sen-sor does not function correctly,the system activates the function(the lights come on) and the dippedbeam headlamps indicator light onthe instrument panel flashes.


23-06-2003


Do not cover the rainsensor located on thewindscreen behind theinterior mirror.

When using an automatic carwash, switch off the ignition orcheck that the wiper stalk is not inthe automatic position.In winter, it is advisable to waituntil the windscreen is completelyfree of ice before operating theautomatic wipe.

WINDSCREEN WIPER STALK

Windscreen wipers3 Fast wipe2 Normal wipe1 Automatic wipe0 Off

When the ignition has beenswitched off for more than aminute with the control in a wipeposition (1, 2 or 3), it is necessaryto reactivate this function. To dothis, move the stalk to any position,then move it back to the requiredposition.

Maintenance position

This position enables the wiperblades to be removed.

In the minute following switching offof the ignition, any action on the stalkpositions the wipers in the centre ofthe windscreen so that they may becleaned or replaced.

To park the wipers after this hasbeen done, switch on the ignitionand operate the stalk.

Windscreen and headlamp wash

Pull the windscreen wiper stalktowards you. The windscreen washthen the windscreen wipers operatefor a fixed period.

The windscreen wash and headlampwash operate simultaneously for twoseconds, only if the headlamps areon .

Screenwash/headlamp wash low

When the minimum level ofthe reservoir is reached, thiswarning light comes on,accompanied by an audiblesignal and the message

'Screenwash low' on the multi-func-tion display.

Next time you stop, fill the screen-wash / headlamp wash reservoir.

If the reservoir is empty, the warninglight comes on when the ignition isswitched on, or every time the stalkis operated, until the reservoir isfilled.

23-06-2003


Automatic windscreen wiper

In position 1, the wiper operatesautomatically and adjusts its speedto the intensity of the rainfall.

Operating check

Activation

The indicator light comes on,accompanied by an audiblesignal, as soon as the driversets the windscreen wiperstalk to position 1.

Neutralisation

When the function is neu-tralised, going from position 1to another position, the indi-cator light comes on, accom-panied by an audible signal.

In cases of malfunction , the driveris informed by the message 'Rainsensor fault' on the multi-functiondisplay.In position 1, the windscreen wiperwill operate on intermittent wipe.Contact a PEUGEOT dealer to havethe system checked.

23-06-2003


Do not cover the rainsensor located on thewindscreen behind theinterior mirror.

When using an automatic carwash, switch off the ignition orcheck that the wiper stalk is not inthe automatic position.In winter, it is advisable to waituntil the windscreen is completelyfree of ice before operating theautomatic wipe.

WINDSCREEN WIPER STALK

Windscreen wipers3 Fast wipe2 Normal wipe1 Automatic wipe0 Off

When the ignition has beenswitched off for more than aminute with the control in a wipeposition (1, 2 or 3), it is necessaryto reactivate this function. To dothis, move the stalk to any position,then move it back to the requiredposition.

Maintenance position

This position enables the wiperblades to be removed.

In the minute following switching offof the ignition, any action on the stalkpositions the wipers in the centre ofthe windscreen so that they may becleaned or replaced.

To park the wipers after this hasbeen done, switch on the ignitionand operate the stalk.

Windscreen and headlamp wash

Pull the windscreen wiper stalktowards you. The windscreen washthen the windscreen wipers operatefor a fixed period.

The windscreen wash and headlampwash operate simultaneously for twoseconds, only if the headlamps areon .

Screenwash/headlamp wash low

When the minimum level ofthe reservoir is reached, thiswarning light comes on,accompanied by an audiblesignal and the message

'Screenwash low' on the multi-func-tion display.

Next time you stop, fill the screen-wash / headlamp wash reservoir.

If the reservoir is empty, the warninglight comes on when the ignition isswitched on, or every time the stalkis operated, until the reservoir isfilled.

23-06-2003


To keep your children safe, pressswitch 5 to prevent operation of therear windows irrespective of theirposition.One press activates the switch and asecond press deactivates it.

You have two options:

Manual operation: ☞ press or pull switch 1 gently. The

window stops as soon as the switch is released.

Automatic operation:☞ press or pull switch 1 fully. The win-

dow opens or closes completelywhen the switch is released. Pres-sing the switch again stops themovement of the window.

Note: when a door is opened orapproximately 45 seconds followingremoval of the ignition key, none of thewindows can be opened or closed. Youmust switch the ignition on again toopen or close the windows.

Safety auto-reverse When the window rises and meets anobstacle, it stops and lowers again.Note : In the case of unwanted ope-ning of the window on closing (forexample, in the case of ice), if the win-dow will not rise, pull the switch until thewindow closes completely. Continue topress the switch for one second afterclosing.

Following reconnection of the batte-ry, in the event of a malfunction, youmust reinitialise the safety auto-reverse function:- open the window completely, then

close it, it will rise in stages of a fewcentimetres with each press,repeat the operation until the win-dow is completely closed,

- continue to press the switch for atleast one second after reachingthis position.

The safety auto-reverse functionis not operational during theseoperations.

ELECTRIC WINDOWS

1 - Driver's electric window switch.

2 - Passenger's electric windowswitch.

3 - Rear left electric window switch.

4 - Rear right electric windowswitch.

5 - Neutralisation of the rear lighter and the rear electricwindows (child safety).

Always remove the keyfrom the ignition whenleaving the vehicle, evenfor a short time.

In the event of contact when ope-rating the windows, you mustreverse the movement of the win-dow. To do this, press the switchconcerned.When the driver operates the pas-senger window switches, he mustensure that no one is preventingcorrect closing of the window.The driver must ensure that pas-sengers use the electric windowscorrectly.Be aware of children when opera-ting the windows.

23-06-2003


Automatic day/night interior mirror

This automatically and gradually changes between the day and night positions.To prevent dazzling, the glass of the mirror darkens automatically depending onthe intensity of the light from behind. It clears as the light (headlamps of follow-ing vehicles, sunlight) decreases, ensuring maximum visibility.

Operation

Switch on the ignition and press switch 1 :– Indicator light 2 lit (switch pressed): automatic operation.– Indicator light 2 off: automatic system off. The mirror remains at its most clear.

Special feature

To ensure maximum visibility during manoeuvres, the mirror clears automatical-ly when reverse gear is engaged.

Manual interior mirror

The interior mirror has two positions:- day (normal),- night (anti-dazzle).

To change from one to the other,push or pull the lever on the loweredge of the mirror.

AREAS FOR TOLL CARDS /CAR PARK TICKETS

The athermic windscreen has twonon-reflective zones located eitherside of the base of the interior mirror.

They are intended for affixing tollcards and/or car park tickets.

13YOUR AT A GLANCE

23-06-2003

RM2 AUDIO SYSTEM

RT2 AUDIO/TELEPHONE

48

50

23-06-2003


HORN

Press one of the spokes or thecentre of the steering wheel.

MANUAL ADJUSTMENT OFTHE HEADLAMPS

Depending on the load in yourvehicle, adjusting the beam of yourheadlamps is recommended.

0 1 or 2 people in the front seats.

– 3 people.

1 5 people.

2 5 people + maximum authorisedloads.

3 Driver + maximum authorisedloads.

Initial setting is position 0.

Automatic adjustment ofheadlamps

Refer to the paragraph on Lightingunder the section entitled 'Towing atrailer...'.

HAZARD WARNING LIGHTS

Press the button, the direction indicators flash.

They can operate with the ignitionoff.

STEERING WHEEL HEIGHTAND DEPTH ADJUSTMENT ☞ When the vehicle is stationary,

unlock the steering wheel by pulling handle A downwards.

☞ Adjust the height and depth of thesteering wheel then lock bypushing handle A fully upwards.Automatic lighting of hazard

warning lights*

When braking in an emergency,depending on the force of decelera-tion, the hazard warning lights comeon automatically. They switch offautomatically the first time you acce-lerate.

It is also possible to switch them offby pressing the button.

* According to destination.

23-06-2003


SUN VISOR WITHILLUMINATED COURTESYMIRROR

With the ignition on, the mirror isautomatically lit up when the flap isopened.

COURTESY LIGHTS1 - Front courtesy light

2 - Front map reading lightsWith the key in the accesories position (1st notch) or with the ignition on,operate the relevant switch.

3 - Rear courtesy light

4 - Rear map reading lightsWith the key in the accesories position (1st notch) or with the ignition on,operate the relevant switch.

The front and rear courtesy lights come on when the ignition key is removed, onunlocking the vehicle or on opening one of the doors.

They gradually go off after the ignition has been switched on or the vehicle islocked.

☞ Pressing switch 1 turns on the front and rear courtesy lights.

Note: The courtesy lights and sill lights can be neutralised by pressing switch 1for more than three seconds. The map reading lights are not affected by this andmay be switched on.

☞ To re-activate the lights, press the switch.

Sill illumination

The sill light is at the bottom of eachdoor trim.

The light comes on automaticallywhen the door is opened and goesoff automatically when the door isclosed.

23-06-2003


CENTRE CONSOLE1 Storage compartment

2 Front lighterPress and wait for a few moments until it springs outautomatically.

3 Front ashtrayPress the cover to open the ashtray.To release the ashtray for emptying, open it thenpush the cover downwards.

4 Control buttonsA - Switching 'SPORT' suspension on / offB - Central locking / UnlockingC - Opening / Closing / Partial opening of

sunroofD - Unrolling / storing of rear electric blind

5 Front armrest

6 Rear ashtrayTo empty the ashtray, detach the receptacle by pul-ling it towards you.To refit the ashtray, clip it back into its housing.

7 Rear lighterPush in and wait for a few moments until it springsout automatically.

8 Heated rear seats control

Ventilated glove box

To open the glove box, lift the han-dle.

The glove box is lit up when thecover is opened.

The glove box has a vent E thatcan be closed, which produces thesame conditioned air as the ventsin the passenger compartment.

It also has a pen holder F andthree sockets G for connectingvideo equipment.

23-06-2003

Luggage net

The stowing rings allow the net to beplaced in different positions.


Rear sunblind

The blind, fitted to the rear parcelshelf, is intended to protect occu-pants from the glare of the sun andthe lights of cars behind.

Sunblind operation:

With the engine running:

☞ Briefly press button D on the cen-tre console to open it out.

☞ Briefly press button D again tostore it away.

Warning: Do not place anything onthe blind, to avoid it being damaged.

Rear armrest

This provides access to the ski flapfrom the passenger compartment.

It has two cup holders.

Storage compartments

There are two storage compartmentslocated behind the side trim of theboot.

The left side storage compartment isfitted with a CD storage bracket foreight single CDs and one double CD.

To access a storage compartment:

☞ Push the handle downwards andfold down the panel.Rear shelf compartment

This is provided for the storage of afirst aid kit.

The catch on the lid is designed towithstand a weight of 9 lbs (4kg) onimpact.

The four speed automatic gearbox offers a choice between the comfort ofintegral automatic operation , enhanced by a sport and a snow programme,or the pleasure of manual gear changing .

Gear selection gate

☞ Move the lever in the gate to select a function.

Once the function is selected, the corresponding indicator light appears on theinstrument panel screen.

S : sport programme.

� : snow programme.

Park: to immobilise the vehicle and to start the engine , with the handbrake on or off.

Reverse: to reverse (select this function with thevehicle stationary, engine at idle).

Neutral: to start the engine and to park , with the handbrake on.Note: if position N is inadvertently engaged while driving, allow the engine to return to idle before engagingfunction D to accelerate.

Drive: for driving in automatic mode.

Manual: for driving in manual mode.


'PORSCHE TIPTRONIC system' AUTOMATIC GEARBOX Moving Off

With the engine running, to move offfrom position P:

☞ it is essential to press the brakepedal to exit position P,

☞ select function R, D or M, thengradually release the pressure onthe brake pedal; the vehiclemoves off immediately.

You can also move off from position N:

☞ release the handbrake, with yourfoot on the brake,

☞ select function R, D or M, thengradually release the pressure onthe brake pedal; the vehiclemoves off immediately.

WARNINGWhen the engine is at idle, brakesnot applied, if function R, D or M isselected, the vehicle moves evenwithout the accelerator being pres-sed. For this reason, do not leave children unsupervised inside thevehicle, with the engine running.When maintenance operations needto be carried out with the engine running, apply the handbrake andselect position P.

23-06-2003

23-06-2003

Notes

It is only possible to change from onegear to another if the vehicle speedand engine speed permit. If they donot, the vehicle will operate tempora-rily in automatic mode.

When the vehicle is stationary ormoving very slowly, the gearboxautomatically selects gear M1.

Programmes S (sport) and � (snow)do not operate in manual mode.

Operating abnormalityAny operating abnormality isshown by illumination of thiswarning light, accompaniedby an audible signal and themessage 'Automatic gear-

box faulty' on the multi-function dis-play.In this situation the gearbox operatesin downgrade mode (locked in 3rdgear). You may feel a substantialknock when changing from P to Rand from N to R (this will not causeany damage to the gearbox).Do not exceed 60 mph (100 km/h).Contact a PEUGEOT dealer as soonas possible.

Automatic operation

Automatic changing of the four gears :☞ select function D in the gate.The gearbox always selects the mostsuitable gear according to the follo-wing parameters:- the style of driving,- the road profile,- the vehicle load.The gearbox is then operating inauto-adaptive mode, without anyaction on your part.

WARNINGNever select function N when thevehicle is moving.Never select functions P or R unlessthe vehicle is stationary.Never change between functions tooptimise braking on a slippery surface.

NotesFor immediate maximum accelera-tion without touching the gear lever,press the accelerator pedal down asfar as it will go (kickdown). The gear-box will automatically change downor maintain the gear selected untilmaximum engine speed is reached.When the brake is applied, the gear-box will automatically change downin order to provide efficient enginebraking.If you take your foot off the accelera-tor suddenly, the gearbox will notchange to a higher gear for reasonsof safety.

Sport and snow programmesIn addition to the auto-adaptive pro-gramme, there are two special pro-grammes.The programme is displayed on theinstrument panel screen.

Sport programme☞ Press button S once the vehicle

has been started and function Dselected.

The gearbox automatically favourssporty driving and more dynamicacceleration.

Snow programmeThis programme improves startingand drive when traction is poor.☞ Press button � once the vehicle

has been started and function Dselected.

The gearbox adapts to driving onslippery roads.Note: you can return to the auto-adaptive programme at any time.☞ Press button S or � again to switch

off the programme you are in.

Manual operationManual changing of the four gears : ☞ select function M in the gate,☞ push the lever to the + sign to

change to a higher gear,☞ pull the lever to the - sign to change

to a lower gear.You can change from position D(driving in automatic mode) to positionM (driving in manual mode) at any time.


If the battery is flat and thelever is in position P, it willbe impossible to changeto another position.

23-06-2003

ANTI-LOCK BRAKING SYS-TEM (ABS) AND THE ELEC-TRONIC BRAKE FORCE DIS-TRIBUTION (EBFD)

The ABS, in conjunction with theelectronic brake force distribution,increases the stability and manoe-vrability of your vehicle, particularlyon poor or slippery road surfaces.

Note: when changing wheels (tyresand rims), make sure that these areapproved.

The anti-lock braking system comesinto operation automatically whenthere is a risk of wheel lock.

When this warning lightcomes on, accompanied bya buzzer and the message"ABS fault" , it indicatesthat there is a malfunction of

the ABS, which can cause a loss ofcontrol of the vehicle when braking.

When this warning lightcomes on, connected to theSTOP warning light, accom-panied by a buzzer and themessage 'Braking fault' , it

indicates that there is a malfunctionof the electronic brake force distribu-tion, which can cause a loss ofcontrol of the vehicle when braking.


EMERGENCY BRAKINGASSISTANCE SYSTEM

In an emergency, this systemenables the optimum braking pres-sure to be reached more quickly,thus reducing the stopping distance.

It is triggered by the speed at whichthe brake pedal is activated. Theeffect of this is a reduction in theresistance of the pedal and anincrease in braking efficiency.

Stop immediately.

In both cases, consult a Peugeotdealer.

Normal operation of the ABS maymake itself felt by slight vibrationsof the brake system.

In emergency braking, pressvery firmly without releasingthe pressure.

MANUAL GEARBOX

Reverse*

To change to reverse gear, lift thering under the gear lever knob andpush the gear lever to the left then tothe front.

Reverse gear can only be engagedwhen the vehicle is stationary withthe engine idling.

* According to engine.

23-06-2003


Operating check

When a malfunction of the sys-tems occurs, the switch lightflashes and the warning lightcomes on, accompanied by anaudible signal and the mes-

sage 'ESP/ASR system faulty' on themulti-function display.

Contact a PEUGEOT dealer to have thesystem checked.

Disarming the ASR/ESPsystems

In exceptional conditions (starting avehicle which is bogged down, stuckin snow, on soft ground...), it may beadvisable to disarm the ASR system,so that the wheels can move freelyand regain grip.

☞ Press the 'ESP OFF'switch, located under thesteering wheel to the left.

The switch lights up and thewarning light comes on,accompanied by an audiblesignal and the message'ASR/ESP system de-acti-

vated' on the multi–function display :the ASR and ESP systems no longerhave any effect on the engine opera-tion.

These are triggered again :☞ automatically if the ignition is

switched off,☞ manually by pressing the switch

again.

DYNAMIC STABILITYCONTROL (ESP) AND TRACTION CONTROL (ASR)

These systems are linked and com-plementary to the ABS system.

In the event of a significant variationbetween the trajectory of the vehicleand the path required by the driver,the ESP system acts automaticallyon the engine and on the brake ofone or more wheels, to put the vehi-cle back on course.

The traction control (ASR) systemoptimises drive, in order to avoid thewheels slipping, by acting on thebrakes of the drive wheels and onthe engine. It also enables the direc-tional stability of the vehicle to beimproved during acceleration.

Operation of the ESPand ASR systems

When one of the two sys-tems is in operation, thisindicator light flashes.

The ESP system offersexceptional safety in nor-mal driving, but this shouldnot encourage the driver totake extra risks or drive at

high speed.

The correct functioning of this sys-tem depends on observation of themanufacturer's recommendationsregarding wheels (tyres and rims),the braking components and theelectronic components, as well asthe PEUGEOT assembly andoperation procedures.

After an impact, have the systemchecked by a PEUGEOT dealer

23-06-2003


ELECTRONICALLYCONTROLLED SUSPENSION

The suspension adapts automatical-ly and instantly to different drivingstyles and road characteristics,improving the comfort of the occu-pants and the vehicle's road holdingcapabilities.

The suspension favours smoothshock absorption, ensuring a com-fortable ride, but as soon as condi-tions demand a change (sporty dri-ving, tight bends, avoidance action,etc.) it automatically selects firmershock absorption, guaranteeing opti-mum road holding.

Selecting the SPORT position

☞ Press switch 1, theSPORT indicator light willcome on, accompaniedby an audible signal.

In this position, the suspension ismaintained in the SPORT position.

To return to automatic operation

☞ Press switch 1 again. Theindicator light will go outand the AUTO indicatorlight comes on, accompa-nied by an audible signal.

Operating check

This is confirmed by the switch lightand the indicator lights. The switchlight comes on for approximatelythree seconds every time the ignitionis switched on.

If the switch light flashes or if theindicator light comes on, accompa-nied by an audible signal and themessage 'Hydraulic suspensionpressure insufficient' , contact yourPEUGEOT dealer.

HANDBRAKE

Applying

When parking, pull the handbrake toimmobilise your vehicle.

Warning: when parking on a slope,direct your wheels towards the pave-ment and apply the handbrake.

Releasing

Pull the handle and press the buttonto release the handbrake.

23-06-2003


CRUISE CONTROL

Cruise control enables the vehicle tomaintain a steady speed pro-grammed by the driver, regardless ofthe road characteristics and withoutthe driver having to touch the accel-erator or brake pedals.

In order for it to be memorised, thevehicle speed must be greater than25 mph (40 km/h) or 40 mph(60 km/h), (according to engine),with at least 4th gear engaged(2nd gear for the automatic gear-box).

Operation☞ Place the ring of switch 1

in the ON position. Theindicator light will come onaccompanied by an audi-ble signal.

A speed can be memorised.

☞ Place the ring of switch 1 in theOFF position to cancel.

Memorising a speed

As soon as you reach the chosenspeed, push stalk 1 upwards ordownwards. This memorises thespeed, which will be maintainedautomatically.

Note : it is possible to acceleratemomentarily without disarming thecruise control.

Cancelling the memorisedspeed

If you wish to cancel the memorisedspeed :

☞ Pull stalk 1 towards you or pressthe brake or clutch pedal.

Recalling the memorisedspeed

After cancellation, flick stalk 1 upwards or downwards. Your vehiclewill return to the last memorised speed.

Changing a memorised speed

To memorise a speed higher thanthe previous one:

☞ keep stalk 1 pressed upwards;

☞ release it when you have reachedthe required speed.

To memorise a speed lower than theprevious one :

☞ keep stalk 1 pressed downwards;

☞ release it when you have reachedthe required speed.

Disarming the cruise control☞ place the ring in the OFF position

or switch off the ignition.

Do not use cruise controlon slippery roads or inheavy traffic.

23-06-2003

14

FUEL FILLER FLAPOpening / Closing: Locking andunlocking of the fuel filler flap, thedoors and boot is simultaneous(except when selective unlocking isinitialised; in this case press the unlocking button of the remote controlonce).

FILLING WITH FUELThis must be carried out with the engine and the ignition switched off.A hook is provided inside the fuel filler flap to hold the filler cap.A label affixed to the inside of the fuel filler flap informs you which fuels areauthorised or prohibited.

The tank capacity is approximately 80 litres.

When the minimum level of the tank is reached, this light comeson, accompanied by an audible signal and the message 'Fuellevel low' on the multi-function display.You have enough fuel to drive approximately 30 miles (50 km).

OPENING THE BONNET

From inside:

☞ pull the handle downwards.

From outside:

☞ lift the catch andraise the bonnet.

YOUR AT A GLANCE

119 118

23-06-2003


If there is an operatingfault, the audible signal willbe a short bleep followedby a long bleep whenchanging to reverse gear.

REAR PARKING ASSISTANCE

This system consists of four proximi-ty sensors, located in the rear bum-per, and a special speaker fittedunder the rear parcel shelf.

It detects any obstacle (person,vehicle, tree, gate, etc.) behind thevehicle. However, it cannot detectobstacles located directly under thebumper.

An object, such as a stake, cone orany other similar object may bedetected at the beginning of themanoeuvre but may no longer bedetected when the vehicle comesclose to it.

Note: this function will be disarmedwhen the vehicle is towing a trailer(vehicle fitted with towing attachmentrecommended by PEUGEOT). Inbad weather or in winter, ensure thatthe sensors are not covered withmud, frost or snow.

Activation

The system is activated as soon asreverse gear is engaged; an audiblebleep shows that it is active.

An audible signal indicates the prox-imity of the obstacle. This signalbecomes more rapid as the vehicleapproaches the obstacle.

When the distance between the rearof the vehicle and the obstacle isless than approximately twenty-fivecentimetres, the audible signalbecomes continuous.

Deactivation☞ Change to neutral, the system

becomes inactive.

Detection zone

23-06-2003

CHECKING THE LEVELS

Oil level☞ Check the level regularly and top

up between changes. Maximumconsumption is 0.5 l per 600 miles(1000 km).

Carry out this check with thevehicle level, engine cold, usingthe oil level gauge on the instru-ment panel or the dipstick.

Dipstick

There are two markson the dipstick :

A = maximum

Never fill past thismark.

B = minimum

To maintain the reliabi-lity of engines andemission control sys-tems, the use of addi-tives in engine oil isprohibited.

Oil change

According to the information given in'PEUGEOT SERVICING'.

PRACTICAL INFORMATION149

Viscosity selection

In all cases, the oil selected mustmeet the manufacturer's require-ments.

Brake and clutch fluid level:- The level must always be between

the DANGER and MAXIMUM marksin the reservoir.

- If the level drops substantially,contact a PEUGEOT dealer imme-diately.

Fluid change:- must be carried out according to

the manufacturer's servicing sche-dule,

- use fluids recommended by themanufacturer, which fulfil DOT4standards.

WARNING: brake and clutch fluid isharmful to health and very corrosive.

Used oil

Prevent used oil from coming into pro-longed contact with the skin.

Do not dispose of used oil, brake andclutch fluid or coolant into drains oronto the ground.

Power steering reservoir☞ Open the reservoir, with the engi-

ne cold. The level should alwaysbe above the MINI mark and closeto the MAXI mark.

Windscreen and headlampwash level

For best quality cleaning and for yoursafety, we advise that you use products recommended by PEUGEOT (reservoir capacity 4 litres or 6.5 litres with headlampwash).

23-06-2003


CHECK...

Battery

At the start of winter, have your bat-tery checked by a PEUGEOT dealer.

Air filter and pollen filter

Have the filter elements replacedregularly. If you drive in dustyconditions, change them twice asoften.

Particulate emission filter -Additive reservoir (Dieselmodels)

It is essential the particulate emission filter be maintained and the additive reservoir be filled by aPEUGEOT dealer, according to themanufacturer's servicing schedule.

Brake pads

Brake pad wear depends on thestyle of driving, in particular forvehicles which are used in town,over short distances. It may benecessary to check the thickness ofthe pads, even between services.

Handbrake

Where the handbrake travel is toogreat or there is a reduction in theperformance of the system, thehandbrake should be adjusted, evenbetween services.

Have the system checked by a PEUGEOT dealer.

Manual gearbox

This does not need an oil change.Have the level checked, according tothe manufacturer's servicing schedule.

Automatic gearbox

This does not need an oil change.Have the level checked by a PEUGEOT dealer, according to themanufacturer's servicing schedule.

Oil filter

Change the filter regularly, in accor-dance with the servicing schedule.

Fuel supply cut-off

In a serious collision, a mechanismprevents fuel from reaching theengine.

To re-establish the fuel supply:

☞ press the red button on the angleof the front right-hand suspensionassembly, under the bonnet.

Only use productsrecommended by Auto-mobiles PEUGEOT.To ensure best perfor-

mance from components asimportant as the power steeringand the braking system, PEUGEOT selects and offersquite specific products.

23-06-2003

151

TYRE UNDER-INFLATION DETECTIONSensors check the tyre pressureduring driving, and trigger a warningin the event of malfunction (speedgreater than 15mph [25 km/h]).

Flat tyre

When this warning lightcomes on, accompanied byan audible signal and themessage 'Tyre pressurelow' on the multi-function

display, have the tyre pressurechecked as soon as possible.

Puncture

This warning light, accom-panied by an audible signaland the message 'Punc-tured tyre(s) detected' onthe multi-function display, isfollowed by illumination of

the 'STOP' warning light.Stop immediately, avoiding any sud-den movement of the steering wheeland the brakes.Change the damaged (punctured orvery deflated) tyre, and have the tyrepresure checked as soon as possible.Note: if the damaged tyre is tem-porarily stored in the boot, it willagain emit this message to remindyou of the necessity of having itrepaired. This will prevent anotherwarning of the same type being dis-played.

Sensor(s) not detected

This warning light, accom-panied by an audible signaland the message 'X tyrepressure sensor(s) miss-ing ' on the multi-function

display, indicates that under-inflationdetection is absent from one (or sev-eral) tyre(s). Contact a PEUGEOT dealer toreplace the faulty sensor(s).

Note: this message is also displayedwhen one of the tyres is away fromthe vehicle (being repaired) or whena wheel without a sensor is fitted.

PRACTICAL INFORMATION

All repairs and changingof tyres on a wheel fittedwith this system must becarried out by a PEUGEOT dealer.

The tyre under-inflation detec-tion system is an aid to drivingwhich does not replace theneed for the driver to be vigilantor to drive responsibly.

This system does not remove thenecessity for having the tyre pres-sure (including that of the sparewheel) checked regularly, toensure optimum dynamic perfor-mance of the vehicle and to pre-vent premature wear of the tyres,particularly in the case of arduousdriving conditions (heavy load,high speed).

The system may temporarily bedisturbed by radio broadcasts ona frequency close to it.

23-06-2003


CHANGING A WHEEL☞ Park the vehicle on level, stable

and non-slippery ground.

☞ Apply the handbrake, switch offthe ignition and engage first orreverse gear (position P for theautomatic gearbox).

Access to the spare wheel andthe jack in the boot

☞ Detach the luggage net.

☞ Lift the boot carpet using the liftinghook. Secure this hook behindthe boot seal.

Tools available

The following tools are located in thepolystyrene holder in the centre ofthe spare wheel:

1 - Wheelbrace.

2 - Centralising tool.

3 - Wheelbrace extension.

4 - Jack fitted with a system whichenables it to be folded or unfol-ded rapidly.

5 - Removable towing eye.

6 - Alloy wheel trim remover.

7 - Trim cover tool.

Removal

☞ For vehicles with alloy wheels fit-ted with wheel trims, pull thecentre trim by using tool 6 in oneof the holes.

☞ Loosen the wheel bolts.

☞ Take the jack from the tool kit andfold it by pressing the ends A.

23-06-2003


☞ Fold the jack by pressing at theends A and place it in one of thefour locations E underneath thevehicle (the nearest one to thewheel to be changed).

☞ Extend the jack, first by hand, pul-ling the ends A then using wheel-brace 1 and the extension 3.

☞ Remove a wheel bolt at the topand fit the centralising tool 2 in itsplace.

☞ Unscrew the other bolts andremove the wheel.

Fitting a wheel

☞ Position the wheel using the cen-tralising tool to assist you.

☞ Tighten the bolts by hand andremove the centralising tool.

☞ Partly tighten the bolts using thewheelbrace.

☞ Fold the jack and remove it.

☞ Fully tighten the bolts using thewheelbrace.

☞ Replace the wheel trim.

☞ Put the tool holder back in posi-tion. This helps to keep the bootfloor in its correct position, to pre-vent any deformation of the floorwhen loaded.

☞ Tighten the spare wheel securingstrap to prevent noise and for yoursafety in the event of impact.

For your safety, alwayschange the wheel:

- on level, stable, non-slipperyground,

- with the handbrake applied,- with first or reverse gear enga-

ged (position P for the automaticgearbox),

- never go underneath a vehiclewhich is supported only by ajack (use a ramp).

After changing the wheel:- have the tightening of the bolts

and the tyre pressure checkedby a PEUGEOT dealer as soonas possible.

- have the punctured wheel repai-red and refit it to the vehicle assoon as possible.

Tyres fitted with the Tyre Under-Inflation Detection System.These wheels have a pressuresensor. Have them repaired by aPEUGEOT dealer.

23-06-2003

Special features of alloy wheels

Bolt covers

Alloy wheel bolts are covered bychrome trims.

Use tool 7 to remove the trims beforeslackening the bolts.

Anti-theft bolts*

If your wheels are fitted with an anti-theft bolt (one per wheel), the chro-me trim and then the plastic covermust be removed using tool 7, befo-re unscrewing the bolt using one ofthe two anti-theft sockets (whichwere given to you on delivery of yourvehicle along with the duplicate keysand the confidential card) and thewheel brace 1.

Note : make a careful note of thecode number engraved on the headof the anti-theft socket. This willenable you to obtain duplicate anti-theft sockets from a PEUGEOTdealer.

* According to model and destination.


Fitting the spare wheel

If your vehicle is fitted with a steelspare wheel, when fitting it, it is nor-mal to notice when tightening thebolts that the washers do not comeinto contact with the rim. The sparewheel is secured by the cone-shapeof each bolt.

Fitting snow tyres

If you fit snow tyres mounted on steelwheels to your vehicle, it is essentialto use special bolts available fromyour PEUGEOT dealer.

23-06-2003


CHANGING A WINDSCREENWIPER BLADE

Placing the wiper blades in themaintenance position

☞ Less than one minute after switch-ing off the ignition, activate thewindscreen wiper stalk to positionthe blades in the centre of thewindscreen (maintenance posi-tion).

Replacing a blade

☞ Lift the arm, then unclip the bladeand remove it.

☞ Fit the new blade and fold downthe arm.

To park the blades, switch on theignition and operate the wind-screen wiper stalk.

REMOVING A MATWhen removing a mat on the driver'sor passenger's side, push back theseat as far as possible and removethe clips.To remove a rear mat, push the cor-responding front seat forward andremove the clip.On refitting, position the mat andpress firmly to refit the securing clips.

LOAD REDUCTION FUNCTION

When driving, certain functions (airconditioning, heated rear screen,heating system for passenger com-partment of diesel vehicles, etc.)may be switched off temporarily,depending on the level of batterycharge.

Reactivation of these functions isautomatic, once the battery charge issufficient.

Note: at the risk of discharging thebattery, the functions that have beenswitched off may be reactivatedmanually.

A flat battery prevents the engine from starting.

ECONOMY MODE FUNCTION

After the engine has stopped, certainfunctions (windscreen wiper, electricwindows, sunroof, rear electric blind,electric seats, audio equipment, tele-phone etc) can only be used for thir-ty minutes, to prevent dischargingthe battery.

Once the thirty minutes are over, themessage "Economy mode active"appears on the multi–function dis-play and the active functions are puton standby.

These functions are automaticallyreactivated next time the vehicle isdriven.

Note: if the telephone is being usedwhen economy mode starts, it willstill be possible to finish the call.

23-06-2003

- Do not disconnect theterminals while theengine is running.

- Do not recharge the batterieswithout disconnecting the termi-nals first.

- Close the windows and sunroofcompletely before disconnectingthe battery.

- Following reconnection of thebattery, switch on the ignitionand wait 1 minute before star-ting the engine to permit initiali-sation of the electronic systems.However, if minor problems per-sist after this operation, contacta PEUGEOT dealer.

BATTERY

Vehicles fitted with two batteries

Certain vehicles, depending on thecountry where the vehicle is sold, arefitted with two batteries:- a battery for starting, located in the

engine compartment,- a service battery, located in the

boot.The starter battery has a label sho-wing that the service battery is in theboot.These are special batteries.If one of them needs to be replaced,contact a PEUGEOT dealer.

To charge the starter battery witha battery charger:☞ remove the style cover to gain

access to the starter battery,☞ disconnect the battery,

Follow the instructions for usegiven by the battery chargermanufacturer,

☞ reconnect the battery, starting withthe negative (-) terminal,

☞ check that the terminals and theconnectors are clean. If they arecovered with sulphate (whitish orgreenish deposit), disconnect andclean them,

☞ refit the style cover.

To start the vehicle from anotherbattery:

☞ remove the style cover to gainaccess to the starter battery,

☞ remove the maxi fuse located nearto the starter battery,

☞ connect the red cable to the positi-ve (+) terminals of the two batteries,

☞ connect one end of the green orblack cable to the negative (-) ter-minal of the additional battery,

☞ connect the other end of the greenor black cable to an earth point onthe vehicle which has broken down,as far as possible from the battery,

☞ start the engine and let it run,

☞ wait for the engine to return to idlethen disconnect the cables,

☞ drive a few kilometres in order torecharge the starter battery, thenreplace the maxi fuse near to it,

☞ refit the style cover.

To recharge the service battery,contact a PEUGEOT dealer.


If electrical operations are carried out,disconnect the starter battery and

remove the maxi fuse located next to it.It is advisable to disconnect

the starter battery and remove themaxi fuse located next to it, if the

vehicle is not to be used for a periodof more than one month.

23-06-2003


TOWING YOUR VEHICLE

Without lifting (4 wheels on the road)

You should always use a tow bar.

The towing eye is inside the spare wheel.

From the front:

☞ Unclip the bottom of the cover, using the flat part of the towing eye,

☞ Screw in the towing eye until it locks.

From the rear:

☞ Unclip the top of the cover using the flat part of the towing eye,

☞ Screw in the towing eye until it locks.

Lifting (2 wheels only on the road )

It is preferable to raise the vehicle by the wheels.

Never use the radiator crossmember.

Special features of the automatic gearbox

When towing with four wheels on theground, the following rules must beobeyed:– lever in position N,– tow the vehicle at less than 30 mph

(50 km/h) over a maximum distance of 30 miles (50 km).

– do not add oil to the gearbox.

When towing with theengine switched off,there is no brakingassistance

23-06-2003

TOWING A TRAILER, CARAVAN,BOAT ETC...

Only use original PEUGEOT towbars which have been tested andapproved from the design stage ofyour vehicle.

The tow bar must be fitted by a PEUGEOT dealer.

Driving advice

Distribution of loads: distribute theload in the trailer so that the heaviestloads are as close as possible to theaxle and the nose weight is close tothe maximum authorised without,however, exceeding it.

Cooling: towing a trailer on a slopeincreases the coolant temperature.

As the fan is electronically controlled,its cooling capacity is not dependenton the engine speed.

On the contrary, use a high gear tolower the engine speed, and reduceyour speed.

In all cases, pay attention to thecoolant temperature.Note: in certain cases of particularlyarduous use (towing the maximumload up a steep slope in high tempe-ratures), the engine automaticallylimits its power. In this case, cuttingoff the air conditioning allows theengine power to be recovered, andtherefore the towing speed to besignificantly increased (approximate-ly 12mph [20 km/h] more).If the coolant temperature warninglight comes on, stop the vehicle andswitch off the engine as soon aspossible.

Tyres: check the tyre pressures ofthe towing vehicle (label on the edgeof the driver's door) and of the trailer,observing the recommended pressu-re.

Brakes: towing increases the bra-king distance. Drive at a moderatespeed, change down early and brakegradually.

Side wind: sensitivity to side wind isincreased. Drive smoothly and at amoderate speed.

Lighting

Manual adjustment

Adjust your headlamps so as not todazzle other road users (see sectionon ''Manual adjustment of head-lamps''). Check the electrical signal-ling of the trailer.

Automatic headlamp adjustment(Automatic beam correction)

For vehicles with Xenon bulbs, thissystem automatically corrects theheight of the beam, whatever theload of the vehicle. The driver isthen assured of having optimum ligh-ting and not causing a nuisance toother road users.

In cases of malfunction, the driver isalerted by means of the warning lighton the instrument panel and the sys-tem adjusts your headlamps to thelow position.



ACCESSORIES FOR YOUR 607

For your PEUGEOT only use accessories and original parts approved by the manufacturer.

These accessories and parts are all adapted to your PEUGEOT, after being tested and approved for reliability and safety, which PEUGEOT cannot guarantee for other products.

A wide choice of original accessories, approved by PEUGEOT, is available through the dealer network. They all carrythe PEUGEOT guarantee:

– Security : Anti-theft alarms (pre-wired function), window engraving, wheel anti-theft devices, first aidkit, warning triangle, safety jacket, etc.

– Protection : Covers compatible with side air bags, mats, boot tray, styling mud flaps.

– Communication : Telephone, hands-free kits, satellite navigation, CD changer, speakers.

– Customising : Alloy wheels, wheel trims, sports exhaust, spoiler, leather gear lever knob.

– Comfort : Telephone console, door spoilers.

– Leisure pursuits : Trailer tow bar (maximum towable load: 1800 kg), roof bars (maximum load: 75 kg), transportation accessories (bicycle carrier, ski carrier), roof box, snow chains etc.

– Children : Booster seats and child seats, rear blind.

– Maintenance products: Windscreen wash fluid, interior and exterior cleaning and maintenance products.

Before fitting any electrical accessory to your vehicle, consult a PEUGEOT dealer.

23-06-2003

23-06-2003

TECHNICAL DATA169

2 litre 16V Manual 9DRFNB 22.9 (12.3)* 42.8 (6.6)* 32.8 (8.6)* 205 g/km*

2.2 litre 16V Manual 9D3FZB 22.2 (12.7) 39.2 (7.2) 30.7 (9.2) 219 g/km

2.2 litre 16V Automatic 9D3FZE 20.4 (13.8) 39.2 (7.2) 29.4 (9.6) 230 g/km

24V V6 injection Manual 9DXFXB 19.8 (14.2) 38.7 (7.3) 28.5 (9.9) 237 g/km

24V V6 injection Automatic 9DXFXE 19.2 (14.7) 36.6 (7.7) 27.7 (10.2) 245 g/km

2 litre turbodiesel HDI Manual

2.2 litre 16Vturbo diesel HDI Manual 9D4HXB 31.7 (8.9) 51.4 (5.5) 42.2 (6.7) 178 g/km

2.2 litre 16Vturbo diesel HDI Automatic 9D4HXE 28.8 (9.8) 48.7 (5.8) 39.2 (7.2) 193 g/km

Fuel consumption values correct at time of printing.* According to country.

Consumption As per directive 99/100 in MPG (litres/100km)

Engine Gearbox Model Urban Extra-urban Mixed Emissioncodes driving driving driving by mass

of CO2

9DRHZB 35.8 (7.9)* 60.1(4.7)* 47.9 (5.9)* 157 g/km*

9DRHSB 35.7 (8.0)* 60.0 (4.8)* 47.8 (6.0)* 160 g/km*

23-06-2003

TECHNICAL DATA170

Engines

Gearbox

Model codes:

• Kerb weight• Gross vehicle weight (GVW)• Gross train weight (GTW)*• Braked trailer weight (within GTW limit)• Recommended nose weight

2 litre 2.2 litre 2.2 litre 24V 24V16V 16V 16V V6 injection V6 injection

Manual Manual Auto. Manual Auto.

9DRFNB 9D3FZB 9D3FZE 9DXFXB 9DXFXE

1436 1 455 1 475 1 560 1 580– 2 035 2 055 2 140 2 160

3 635 (1) - 3 835 (2) 3 555 (1) - 3 855 (2) 3 940 (1) - 3 940 (2) 3 660 (1) - 3 960 (2)– – – – –– – – – –

Engines

Gearbox

Model codes:

• Kerb weight• Gross vehicle weight (GVW)• Gross train weight (GTW)*• Braked trailer weight (within GTW limit)• Recommended nose weight

2 litre 2.2 litre 2.2 litreHDI 16V HDI 16V HDI

Manual Manual Auto.

9DRHZB/HSB 9D4HXB 9D4HXE

1490 1 535 1 550– 2 115 2 130– 3 715 (1) - 3 865 (2) 3 330 (1) - 3 630 (2)

– – –

* The speed of a towing vehicle is limited to 60 mph (100 km/h).(1) 12 % gradient. (2) 8 % gradient.

Note: When the external temperature is higher than 45°C, restrict the gross train weight. For vehicles with a 2.2 litre 16VHDI engine with automatic gearbox, towing is not possible

WEIGHTS AND TOWING LOADS (in kg)

23-06-2003

TECHNICAL DATA171

DIMENSIONS (in mm)

23-06-2003

TECHNICAL DATA172

THE IDENTIFICATION FEATURES OF YOUR 607A. Manufacturer's plate.B. Serial number on the bodywork.C. Serial number on the fascia.D. Tyres.

Label D on the edge of the driver's door indicates:- the dimensions of the rims and tyres,- the makes of tyre recommended by the manufacturer,- the tyre pressures (checking of the tyre pressure must be carried out when the tyres are cold, at least once a

month).E. Paint reference

The label on the right hand engine support in the engine compartment indicates the paint colour reference.

23-06-2003

PEUGEOT SERVICING

Your vehicle benefits from extended service intervals.

• For petrol engines: every 20,000 miles (30 000 km) or every two years.

• For direct injection diesel engines: every 12,000 miles (20 000 km) or every two years.

The service indicator informs you when each service is due; the point at which it is due is calculated from the last indicatorzero reset (see corresponding section).

Lighting of the service spanner indicates that the service is overdue*:

- either in terms of distance (over 20,000 miles [30 000 km] for petrol engines or 12,000 miles [20 000 km] for Diesel engines),

- or in terms of duration (over two years)

Note: if the battery is disconnected, only the distance will be taken into account.

The extension of the service intervals means that the engine oil level must be checked regularly: topping up of theoil between oil changes is normal.

It is for this reason that the PEUGEOT network invites you to an intermediate visit between regular services.

The date of this service is not shown by the service indicator. It is to be carried out at least every 10,000 miles (15 000 km) for petrol engines and every 6,000 miles (10 000 km) for direct injection diesel engines.

A PEUGEOT dealer will carry out a quick check, and will top up the levels if necessary (oil, coolant, screenwash upto 2 litres).

If the oil level is too low there is a risk of serious damage to the engine: check the engine oil level at least every2,000 miles (3 000 km) or 3,000 miles (5 000 km), depending on the conditions of use.

The extended service intervals have been made possible by technical modifications to the vehicles and lubricants:

THUS IT IS ESSENTIAL TO ONLY USE ENGINE LUBRICANTS WHICH ARE RECOMMENDED BY THE MANUFACTURER.

* Whichever comes first.

PEUGEOT SERVICING18

23-06-2003

PEUGEOT SERVICING 21

Zero re-set

Your PEUGEOT dealer carries outthis operation after each service.

However, if you carry out the serviceyourself, the re-set procedure is asfollows:

☞ Switch off the ignition,

☞ Press and hold the trip recorderre-set button,

☞ Switch on the ignition.

The display begins a countdown.

When the display shows 0, releasethe button; the service symbol disap-pears.

Important: after this operation, if youwish to disconnect the battery, lockthe vehicle and wait for at least fiveminutes, otherwise the zero re-setwill not be registered.

MAINTENANCE OF PARTS SUBJECT TO WEAR AND A CHECK OF CONSUMABLES

Some of your vehicle's vital components have specific servicing schedules.

• The brake fluid is to be replaced every 36,000/40,000 miles (60,000 km) orevery two years maximum;

• The passenger compartment filter must be checked at each visit to a PEUGEOT dealer (services and intermediate visits) or more often , dependingon the environment (dust, pollution, etc.);

• For HDI turbo diesel engines with particulate emission filter , maintenanceof the filter and topping up of the additive reservoir must be carried out every 72,000 miles (120,000 km) maximum by a PEUGEOT dealer;

• Replacement of the timing belt : contact a PEUGEOT dealer.

• Tyre pressure sensors are to be replaced every 10 years .

• The check on tyre inflation pressure must be carried out cold at least oncea month .

23-06-2003


THE SERVICE LEVELSEach vehicle has its own servicing cycle, defined by the manufacturer in terms of its technical specification.This cycle consists of alternating 2 types of service A and C, intermediate visits and a few additional operations specific toyour vehicle; these correspond to key stages in the life of your 607.At your first and each subsequent service, your dealer will advise you of the type and content of the next servicedue.

Intermediate top-up visit.

MAINTENANCE CYCLE FOR YOUR PETROL ENGINE 607

2 litre 16 V and 2.2 litre 16V petrol engines : service every 2 years or 20,000 miles (30 000 km) maximum (unless theservice indicator shows it is required before this)

1st service at 6,000 miles(10 000 km) or 6 months*.This is necessary in order to

benefit from the warranty.

MILES (KM) 20,000 (30 000) 40,000 (60 000) 60,000 (90 000) 80,000 (120 000) 100,000 (150 000) 120,000 (180 000)

24V V6 petrol injection engine : service every 2 years or 20,000 miles (30 000 km) maximum (unless the service indica-tor shows it is required before this)

1st service at 6,000 miles(10 000 km) or 6 months*. This is necessary in order to

benefit from the warranty.

MILES (KM) 20,000 (30 000) 40,000 (60 000) 60,000 (90 000) 80,000 (120 000) 100,000 (150 000) 120,000 (180 000)

Replacement of brake fluid every 2 years or 40,000 miles (60 000 km).These fixed operations are carried out with synthetically based oil. Fuel economy oilor synthetic oil may also be used (except for the 2.2 litre 16 V petrol engine).

+ replacement of air filter+ replacement of

fuel filter

+ replacement of air filter+ replacement of

fuel filter


23-06-2003


Intermediate top-up visit.

MAINTENANCE CYCLE FOR YOUR 607 TURBO DIESEL HDI

Turbo diesel HDI : service every 2 years or 12,000 miles (20 000 km) maximum (unless the service indicator shows it isrequired before this).

1st service at 6,000 miles (10 000 km)

or 6 months*.This is necessary in order

to benefit from the warranty.

MILES (KM) 12,000 (20 000) 24,000 (40 000) 36,000 (60 000) 48,000 (80 000)

60,000 (100 000) 72,000 (120 000) 84,000 (140 000) 96,000 (160 000) 108,000 (180 000)

+ maintenance of particulateemission filter

Replacement of brake fluid every 2 years or 36,000 miles (60 000 km).

These fixed operations are carried out:- with synthetically based oil , Fuel Economy oil or synthetic oil ;- with 5W 40 oil for Turbo Diesel HDI engines fitted with a particulate emission filter.


23-06-2003

ARDUOUS CONDITIONS OF USE

• Continuous door-to-door use.

• Town use (e.g. taxi).

• Repeated short journeys, with the engine cold at low temperatures.

• A prolonged stay under the following conditions :- countries with temperatures often above +30 °C,- countries with temperatures often below -15 °C,- countries with a dusty atmosphere,- countries whose lubricants or fuels do not conform to our recommendations.



� : All driving conditions. o : Arduous conditions. * According to destination.

A AND C SERVICE LEVELS AND THE INTERMEDIATE VISITLevelOperations Description of operation 1st service

A C Intermediate

DRAIN/REFILL- Engine oil � �- Bleed fuel filter (diesel) � � �- Oil filter � �- Fuel filter* (petrol) �

REPLACE - Fuel filter element (diesel) �- Air filter element �- Spark plugs (petrol) �- Engine oil (check + top-up) � �- Battery (check + top-up) if cap is removable � �

LEVEL - Screen wash (check + top-up) � � � �- Coolant (check + top-up) � � � �- Brake fluid (check + top-up) � � �- Power steering fluid (check + top up according to specification) � � �- Operation of lights and indicators � � �- Condition of glass, headlamp and light lenses and mirrors � �- Horn � �- Windscreen washer jets � �- Condition of wiper blades � �- Condition and tension of the ancillary drive belts � �- Handbrake � �- Condition of hydraulic circuits (hoses and covers) � �

CHECK - Condition of rubber boots and gaiters � � �- Brake pads � � �- Play in hubs, link rods, ball joints, flexible mountings �- Shock absorbers �- Rear drum brake lining wear �- Condition and pressure of tyres (including spare wheel) � � �- Emission control check as per current legislation (petrol) � � �- Smoke opacity (diesel) � �- Passenger compartment filter (according to specification) � � �- Visual check of the whole vehicle � �

SERVICE* - Courtesy vehicle �

ROAD TEST � �

23-06-2003

23-06-2003

D I E S E LD I E S E LP E T R O L P E T R O L

26

(1) Minimum quality standard: Petrol engines ACEA A3 and API SH/SJ; Diesel engines: ACEA B3 and API CF/CDACEA = Association des Constructeurs Européens Automobiles (Association of European Automobile Manufacturers) -

API = American Petroleum Institute.If oil is used which does not conform to the ACEA A3-B3 standards, this requires the "Arduous Conditions" servicing

schedule to be followed, which involves shorter intervals between services.Use only 5W40 synthetic oil for the HDI Turbo Diesel engines with particulate emissions filter.

* Fuel Economy Oil cannot be used for the 2.2 litre 16V petrol engine and the HDI Turbo Diesel engines with particulate emissions filter.

TRADE NAMES OF RECOMMENDED LUBRICANTS IN EUROPE (1)

27

Recommendations for approvedlubricants

The oils which appear in the tableopposite are suitable for most purposes.

The diagram opposite states theoptimum range of viscosity depending on the temperatures atwhich the oils are to be used.

It is also possible to use syntheticoils of 'superior quality'.

In the absence of semi-synthetic orsynthetic oils, oils of API SH/SJ quality (for petrol engines), or CD/CFquality (for diesel engines) may beused by following the 'ArduousConditions' servicing schedule,which specifies shorter service intervals.

Do not hesitate to ask for advicefrom a PEUGEOT dealer to maintain driving pleasure and tominimise the maintenance cost ofyour vehicle.

For countries outside Europe, pleasecontact a local PEUGEOT dealer.

ONLY ONLYManual ESSO GEAR OIL BV TOTAL TRANSMISSION BVGearbox 75W80 PR 9736.41 75W80

ONLYAutomatic ATF 4HP20-AL4Gearbox PR 9736.22

Power ESSO ATF D TOTAL FLUIDE AT42steering PR 9730.94

Power steering FLUIDE DA PR 9730.A1*

Brake circuit PEUGEOT DOT4

Cooling circuit PROCOR TM108/GLYSANTIN G33 or REVKOGEL 2000ONLY Protection to minus 35 degrees Celsius

* Only for extremely cold countries.

Other recommended products

PEUGEOT SERVICING

23-06-2003

23-06-2003

INSTRUMENTS AND CONTROLS28

1 - Handbrake indicator light.

2 - Seat belt not fastened indicator

light.

3 - Main beam headlamps indicator

light.

4 - Dipped beam headlamps

indicator light.

5 - Rev counter.

6 - Left-hand direction indicator.

7 - Fuel gauge.

8 - Right-hand direction indicator.

9 - Speedometer.

10 -Front fog lamps indicator light.

11 - ABS anti-lock braking system

warning light.

12 -Rear fog lamps indicator light.

13 -Engine diagnostics warning

light.

14 -Coolant temperature indicator.

15 -CHECK button.

16 -Trip recorder zero re-set.

17 -Service indicator and totaldistance recorder.

18 -Warning/status screen.

19 - Illumination button +.

20 - Illumination button -.

21 -Engine oil level indicator.

-Engine oil temperatureindicator.

INSTRUMENT PANEL DIALS: PETROL

23-06-2003


1 - Handbrake indicator light.

2 - Seat belt not fastened indicatorlight.

3 - Main beam headlamps indicatorlight.

4 - Dipped beam headlamps indi-cator light.

5 - Rev counter.

6 - Left-hand direction indicator.

7 - Fuel gauge.

8 - Right-hand direction indicator.

9 - Speedometer.

10 -Front fog lamps indicator light.

11 - ABS anti-lock braking system

warning light.

12 -Rear fog lamps indicator light.

13 -Engine diagnostics warning

light.

14 -Coolant temperature indicator.

15 -CHECK button.

16 -Trip recorder zero re-set.

17 -Service indicator and total distance recorder.

18 -Warning/status screen.

19 - Illumination button +.

20 - Illumination button -.

21 -Engine oil level indicator.

-Engine oil temperatureindicator.

INSTRUMENT PANEL DIALS: DIESEL

23-06-2003

YOUR AT A GLANCE4

THE REMOTE CONTROLKEYFrom the driver's door, the keyallows you to lock or unlock thedoors, the boot and the fuel fillerflap, as well as to fold back oropen out the exterior mirrors.The remote control in the keyperforms the same function at adistance.

Locking with the remotecontrol

☞ Press button A.This is confirmed by fixed lightingof the direction indicators forapproximately two seconds.

Unlocking with the remotecontrol key

☞ Press button B.This is confirmed by rapid flashingof the direction indicators.

With the vehicle unlocked, theboot is opened using the electricpush button located on the rightrear side, in the 'zero' of the 607badge.Opening the boot with theremote control key☞ Keep button C pressed.

Key in ignition

If you leave the key in the igni-tion, this is indicated by a buzzerupon opening the driver's door.

Locating the vehicleTo locate your vehicle in a carpark, press button A; the cour-tesy lights come on and the direc-tion indicators flash forapproximately twenty seconds.

Driving position memorisedby the remote control keyWhen locking the doors, theremote control key memorisesthe position of the driver's seatand the driving mirrors. Eachremote control key memorises aspecific setting.When unlocking the doors, thedriver's seat and the exteriormirrors assume the positionmemorised by the remote controlkey, if this position has beenchanged in the meantime.

Note: do not press the buttons ofyour remote control key out ofrange of your vehicle as there is arisk that you could render it inope-rative. It would then be necessaryto reprogramme it.

DeadlockingThis renders the internal andexternal door locking controlsinoperative and permits the auto-matic closing of the windows andthe sunroof.With the key:

☞ lock the vehicle and keep thekey in the locked position forapproximately one second.

With the remote control:

☞ press button A to lock thevehicle (the direction indicatorlights remain on for approxi-mately two seconds),

☞ within five seconds, pressbutton A again to deadlockthe vehicle (the direction indi-cator lights remain on forapproximately two seconds).

112

23-06-2003

Trip recorder zeroreset

With the ignition on, press the button.


Manual operation

With the headlamps on, press buttonB to increase the brightness of theinstrument panel lighting or button Ato reduce it.

As soon as the lighting reaches therequired level of brightness, releasethe button.

Illuminationbuttons

Automatic operation

The degree of illumination of the instrument panel automaticallyadapts to the external brightness.

By day , the setting cannot be altered.

At night, the brightness can beincreased by means of button B.

A PEUGEOT dealer is able to cancelautomatic operation if you prefermanual operation.

23-06-2003

YOUR AT A GLANCE 5

STARTING

STOP position:The ignition is switched off.1st notch, Accessories position:The ignition is switched off but theaccessories still function.2nd notch, Running position: The ignition is on.Starting position:Operates the starter.

Starting a diesel engineIf the temperature is highenough, the pre-heat indi-cator light does not comeon and you can start imme-diately.

If the indicator light comes on, waitfor it to go out before operating thestarter.If the engine stalls, it is necessaryto return the key to the 'Stop' posi-tion before re-starting.

CHECK (vehicle autotest)

Automatic checkWith the ignition on (2nd notch)

If no malfunction hasbeen detected: In theabsence of vehicle func-tion status indicator lights,the OK light is displayed

after two seconds on the instru-ment panel screen. Otherwise, itwill be displayed after these indi-cator lights come on. If a 'minor' malfunction has beendetected: the warning light for thefaulty function is displayed on theinstrument panel screen. Certainindicator lights showing the status ofvehicle functions may also come on,followed by the OK indicator light.If a 'major' malfunction has beendetected: the corresponding warninglight is displayed on the instrumentpanel screen. Certain indicator lightsshowing the status of vehicle func-tions may also come on. The OKindicator light does not come on. Donot start your vehicle. Contact aPEUGEOT dealer.Afterwards, if the passenger airbag is disarmed, the correspon-ding warning light will come on.With the engine running or if thevehicle is moving , the instrumentpanel screen temporarily displays:- lights indicating warnings, when

these occur,- vehicle function

status indicator lights,when a changeoccurs.

The display of certain indicatorlights is accompanied by anaudible signal and a messageon the multi-function display.

Manual check☞ Press the "CHECK" button on

the instrument panel.With the ignition key in the accessoriesposition, with the ignition switched on,with the engine running or the vehiclemoving, this function informs you at alltimes of the following:

- any current warnings,- the status of functions which it is

possible to switch on or switch off(windscreen wipers, automaticswitching on of lights, cruisecontrol, disarming of passenger airbag, etc.).

The corresponding warning lightsare displayed in succession onthe instrument panel screen.If a warning or a change of statusoccurs during the CHECK mode, thecorresponding indicator light(s) will bedisplayed at the end of this mode.

31

Never run the engine ina confined space.

Do not make any modi-fications to the steering lock.

23-06-2003

YOUR AT A GLANCE6

STEERING WHEELSTALKS

LIGHTS

Front and rear lights (ring A)

Lights off.

Side lights.

Dipped / mainbeam headlamps.

Front and rear fog lamps (ring B)

Front fog lamps.

Neutral position of thering.

Rear fog lamps.

Parking lightsTo switch on the parking lights onthe traffic side, with the engineoff, place the direction indicatorlights stalk on the traffic side.

Automatic switching on of lightsThis occurs if the light is poor, as well as in cases of continuous operationof the windscreen wipers, and stops as soon as the light has become brightenough or the windscreen wipers have stopped.

☞ To activate or disarm the function, place the key in the accessoriesposition (1st notch), place the lights stalk in position 0 and press theend of the stalk for more than two seconds.

Do not cover the sunshine / brightness sensor located inthe centre of the fascia. It helps to regulate the air conditioning, the automatic switching on of the lightsand the automatic adjustment of the instrument panelbrightness.

WINDSCREEN WIPERS3 Rapid wipe2 Normal wipe1 Automatic wipe0 Off

Automatic wipeIn position 1, the wipers operateautomatically and adjust theirspeed to the intensity of the rain-fall.

When the ignition has beenswitched off for more than oneminute with the control in awipe position, it is necessaryto reactivate this function.

To do this, move the control toany position, then return to therequired position.

120 122

02-02-2004

YOUR AT A GLANCE 7

ELECTRIC WINDOWS1 - Driver's electric window.2 - Passenger's electric window.3 - Rear right electric window.4 - Rear left electric window.5 - Disarming the rear window controls and the rear lighter (child

safety).

Manual mode:☞ Press or pull the switch lightly. The window stops as soon as the

switch is released.

Automatic mode:☞ Press or pull the switch firmly.One touch completely opens or closes the window.

Safety auto-reverse: when the glass rises and meets anobstacle, it stops and lowers again.

ELECTRIC EXTERIOR MIRRORS☞ Turn knob 6 to the right or to the left to select the corresponding mirror.☞ Move the knob in all four directions to adjust.When parked, the mirrors can be folded back manually,electrically by means of button 6 or automatically on lockingthe vehicle.

STEERING WHEELHEIGHT AND DEPTHADJUSTMENT☞ Push handle A to unlock the

steering wheel.

☞ Adjust the height and depth ofthe steering wheel.

☞ Lock by pulling handle A fully.

119

120 122

23-06-2003

YOUR AT A GLANCE 7

ELECTRIC WINDOWS

1 - Driver's electric window.2 - Passenger's electric window.3 - Rear left electric window.4 - Rear right electric window.5 - Disarming the rear window controls and the rear lighter (child

safety).

Manual mode:☞ Press or pull the switch lightly. The window stops as soon as the

switch is released.

Automatic mode:☞ Press or pull the switch firmly.One touch completely opens or closes the window.

Safety auto-reverse: when the glass rises and meets anobstacle, it stops and lowers again.

ELECTRIC EXTERIOR MIRRORS☞ Turn knob 6 to the right or to the left to select the corresponding mirror.☞ Move the knob in all four directions to adjust.When parked, the mirrors can be folded back manually,electrically by means of button 6 or automatically on lockingthe vehicle.

STEERING WHEELHEIGHT AND DEPTHADJUSTMENT☞ Push handle A to unlock the

steering wheel.

☞ Adjust the height and depth ofthe steering wheel.

☞ Lock by pulling handle A fully.

127

128 130

23-06-2003


AUDIO SYSTEM (RM2 and RT2)

Presentation

Your 607 is fitted with a JBL Audio Hi-Fi system, designed specifically for the vehicle's passenger compartment.

At the heart of the system, a 240 Watt multi-function amplifier (1), located in the boot, independently controls 12 high-definition acoustic speakers.

These speakers make it possible to obtain optimum reproduction and distribution of the sound in the vehicle, in thefront and in the rear.

The speakers are located:- in the fascia: two Micro Tweeters (4) fitted in two Mid Range Speakers (5) for clear reproduction of the sound.- in the front doors: two Woofers (6 ) for reproduction of the bass (low frequencies).- in the rear doors: two Tweeters (2) and two Woofers (3) permitting a balance of frequencies (of the bass and the treble)

in the rear.- on the rear shelf: two Subwoofers (7) , designed specifically for reproduction of the extreme bass (very low frequencies)

for real listening pleasure: you will notice the impact and depth without noticing that the sound comes from the rearof the vehicle.

Adjustment in CD mode

The basic functions remain those of the audio equipment.

No further adjustment is required. However, to benefit fully from your JBL audio system you are advised to adjust AUDIO functions (BASS, TREB,FAD, BAL ) to "0" (zero) and the Loudness (LOUD) tothe "ON" position.

23-06-2003

This kit enables you to use a Bluetooth mobile telephone, in "hands-free"mode.It consists of:- a shoe* A located in the upper compartment of the front armrest, intended

to accommodate the mobile telephone,- a microphone B located in the front courtesy light.

The shoe* holds the NOKIA 6310(i) telephone and connects its aerial to theroof aerial.

The hands-free telephone kit uses the following on-board functions:- the audio system of the RM2 audio equipment,- the steering wheel control or the multi-function display control keypad,- the multi-function display which displays the telephone's main functions.

HANDS-FREE TELEPHONE KIT

Using the steering wheel control

* According to model.

Movement of the lever Command carried out

1 - Upwards Increase volume

2 - Downwards Decrease volume

3 - Forwards Upwards selection of a previous page of thedirectory - Press for more than 2 seconds:access to the first page of the directory

4 - Rearwards Downwards selection of a following page ofthe directory - Press for more than 2 seconds:access to the last page of the directory

5 - Pressing the end Confirmation of the current selection -Press for more than 2 seconds: rapidaccess to the directories

6 - Rotation (clockwise) Selection of the next element

7 - Rotation (anti-clockwise) Selection of the previous element


23-06-2003

Information provided by the display

1 - Indicates receipt of an SMS* or voice message.

2 - On the monochrome screen:Telephone symbol, indicates:- present: telephone ready;- absent: searching for network;- Crossed out, telephone not connected in "hands-free" mode.On the colour screen:The colour of the telephone symbol indicates:- blue: telephone detected (no communication in progress),- orange: telephone detected (communication in progress),- grey: telephone off or not connected in "hands-free" mode or access

conditions not fulfilled (PIN code, network signal level).

3 - Indicates the network signal level (3 levels).

4 - Indicates that the sound is in "mute" mode.

5 - Indicates that your telephone's profile does not have all of the functions(see table of functions available).


The services offered by the hands-free kit depend on the network, the SIM card, the compatibility of the equipment usedand the content formats supported.

Check which services are available to you by looking in your telephone's manual and asking your operator.

In addition to the general information, the multi-function display enables you to display:- the list of matched telephones- the directories,- the incoming and outgoing calls,- the current communication data (number, name of the caller or of the person called, time counter),- the second call,- the name of the operator.

* According to telephone model.

23-06-2003

When the telephone has been matched, it appears on the list"Select a Bluetooth telephone" .

Note: to delete a match, select"Delete a pairing" from the"Hands-free operation" menu.


Matching the Bluetoothtelephone with the hands-free kit

When a telephone is used with thehands-free kit for the first time, youmust match your telephone and thehands-free kit.

You can match up to 3 telephoneswith the hands-free kit.

Note: this operation can only be car-ried out with the engine off, key in theignition or accessories position andwith no telephone connected to thehands-free kit.

- activate the Bluetooth function onyour telephone,

- carry out a search for Bluetoothaccessories present from yourtelephone,

- select the accessory whichappears with the name of yourvehicle.

A superimposed confirmation display appears on the screen.

- accept the match by selecting the"YES" tab using the ring and byconfirming by pressing the end ofthe steering wheel control,

- enter the authentication code"1234" on the telephone.

When this procedure has been com-pleted, a superimposed displayinforms you of the success or failureof the matching operation.

23-06-2003

Using the telephonedirectories

Note: the commands sent using thesteering wheel control can also besent using the multi-function displaycontrol keypad dial (refer to the"satellite navigation system" sec-tion).

You can access the "Telephonedirectories" menu from the"Hands-free operation" menu or bymeans of an extended press on theend of the steering wheel control.


Use with several Bluetoothtelephones

Each matched telephone is associa-ted with an index number (1 to 3) onthe list of matched telephones.

When the screen is switched on, thehands-free kit automaticallysearches to connect to the telephonewith index number (1), if it fails after10 seconds, to the telephone withindex number (2), then if it fails after15 seconds to that with index num-ber (3).

Note: for rapid connection, the mainuser must match his telephone inposition (1).

During operation (no communicationin progress), it is possible to accessthe "Select a Bluetooth telephone"menu to:- connect another telephone in

"hands-free" mode, other than theactive telephone (>>).

- disconnect the active telephone byselecting it.

23-06-2003


Receiving a call

An incoming call is announced by aring and a superimposed display onthe screen.

You can choose:- to take the call by validating the

"YES" tab by pressing the end ofthe steering wheel control,

- not to take the call by selecting the"NO" tab using the ring and thenconfirming by pressing the end ofthe steering wheel control.

Ending a call

During, or at the end of, acommunication, press the end of thesteering wheel control to display the"Hang up the call" superimposeddisplay, then validate via the "YES"tab using the ring and then bypressing the end of the steeringwheel control.

Making a call

You can make a call:- by selecting a correspondent from

one of the directories using the ringon the steering wheel control andthen pressing the end of the stee-ring wheel control to make the call,

- by means of the telephone's voicerecognition system,

- by dialling the number using thetelephone keypad and then pres-sing the telephone's "pick up" but-ton.

23-06-2003

Switching between two calls

During a call, press the end of thesteering wheel control to display thecontrol tabs:

- when it is selected andthen confirmed bypressing the end of thesteering wheel control,this tab button enablesyou to switch from onecorrespondent to theother,

- this tab enables youto hang up the currentcall and resume thecall with the other cor-respondent.

Second call*

This function enables you to receivea second call during a communica-tion.

You are informed by a bleep and themessage "Pick up the call?"appears.

You can choose:- to take the call by confirming the

"YES" tab by pressing the end ofthe steering wheel control,

- not to tale the call by selecting the"NO" tab using the ring and confir-ming by pressing the end of thesteering wheel control.

Note: if you do not confirm your choi-ce, the second call will be left unans-wered when the message expires.

If you do not take the second call,you continue the first call. If you takeit, the first call is put on hold.

Note: if you switch to the call put onhold and it has been interruptedduring your call, you must select the"Hang up" tab to clear the "Com-munication in progress" messagefrom the screen.

Continuity of service

If you get into your vehicle while acall is in progress on your mobiletelephone, you can continue this callusing the hands-free kit after a fewseconds.

To do this, you must "trigger" the system:

- by switching on the ignition,

or

- by switching on the audio equipment.

Note: if you switch the ignition offwhile a call is in progress, the systemremains in "hands-free" mode untilthe end of the call or until the telephone is disconnected from thesystem.

Secrecy modeDuring a conversation, it is possible,from your telephone, to transfer thesound to enable you to continue theconversation using your telephonedirectly.Inversely, you can, from the telepho-ne, transfer the sound to return to"hands-free" mode.To use this function, please refer toyour telephone's manual.

* If option or service available onyour telephone.


23-06-2003

Telephone voice recognitionsystem

First of all, it is necessary to associatea spoken description with the contactselected from your telephone directory(refer to your telephone's manual).

To access the "Voice recognition"system:- press and hold the end of the

steering wheel control,- activate the "Voice recognition"

system by pressing the end of thesteering wheel control briefly..

Notes:- your telephone must display the

welcome screen.- an audble signal emitted by the

telephone and amplified by thespeakers indicates that the spokendescription must be repeated.

SMS messages

The receipt of SMS messages isindicated by a symbol* (envelope) onthe multi-function display.

SMS messages must be written,sent or read using the mobile tele-phone.

Using the assistance calls

In addition to your telephone's direc-tories, there is an assistance directo-ry which enables you to:- make a 112 "Emergency call" ,- call the customer contact centre:

"PEUGEOT Service" .

Note: the emergency call can onlybe made if the access conditions arefulfilled (PIN code, network signallevel).

Warning regarding thedirectories functionThe "Telephone directories" func-tion enables you to consult theircontent and make a call, but in nocase does it enable you to make anychanges (addition, deletion, ...).The mobile telephone's directoriesare loaded in the system's memory(maximum 254 numbers) each timethe telephone is connected, after afew seconds.Note: if the telephone contains morethan 254 directory files, only the first254 files will be transferred to thesystem (in alphabetical order). It will be possible to consult the restof the files directly on the telephone.

Warning regarding the telephonefunction while drivingFor safety reasons, the driver mustmatch the mobile telephone to thehands-free kit and carry out operations which require sustainedattention, with the vehicle STATIONARY .When using the hands-free kit sys-tem while driving, continue to payattention to your driving, (concentra-tion, compliance with the highwaycode, ...).

* According to telephone model.


23-06-2003


Functions available with Bluetooth telephones

The table below lists the functions available depending on the telephone model*.

* Telephone models which correspond to the Bluetooth telephones communicated at the time of printing.

Name of operating Nokia Siemens Sony Philips6310(i) S55 Ericsson Fisio 8208910 T68i Fisio 825

Network level Yes Yes Yes No

Make a call using the mobile telephone's keypad Yes Yes Yes Yes

Make a call using the GSM voice recognition Yes Yes Yes Yes

Make a call using a directory number Yes Yes Yes No

Pick up an incoming call Yes Yes Yes Yes

Do not pick up an incoming call Yes Yes Yes Yes

End a call Yes Yes Yes Yes

Read the telephone directory Yes Yes Yes No

Read the BIS directories, calls received Yes Yes Yes No

Make a call using a known number Yes Yes Yes Yes

Displaying of the number Yes Yes Yes No

Secrecy mode Yes Yes Yes No

Management of a second call Yes Yes Yes No

Continuity of service Yes Yes Yes No

Indication of receipt of an SMS message No Yes Yes No

23-06-2003

YOUR AT A GLANCE8

THE SEATS

Manual front seats

1 - Forwards-backwards adjustment.

2 - Seat angle adjustment*.

3 - Seat height adjustment*

4 - Seat back angle adjustment.

5 - Lumbar adjustment*.

6 - Head restraint height and tilt adjustment (press the tab to slide itdown).

* Driver's seat only.

Electric front seats

A - Forwards-backwards adjustment.

B - Seat angle adjustment.C - Seat height adjustmentD - Seat back angle adjustment.E - Lumbar adjustment.F Head restraint height

adjustment.M - Memorises settings.☞ Switch on the ignition and

adjust the seat and themirrors.

☞ Press button 'M' then within 4seconds either button '1' forthe first position, or button '2'for the second position.

1 - Recalls the firstposition.

2 - Recalls thesecond position.

102

101

23-06-2003

YOUR AT A GLANCE 9

REAR PARKING ASSISTANCE This system, installed in the rearbumper, detects any obstacle(person, vehicle, tree, gate,kerb...) located behind thevehicle.

To activateWith the engine running, thesystem is activated as soon asreverse gear is engaged; a bleepsounds to inform you that it isactive.The proximity information is givenby an audible signal, consisting ofbleeps which become more andmore rapid as the vehicleapproaches the obstacle.When the distance between therear of the vehicle and theobstacle is less than approxima-tely twenty-five centimetres, thesignal becomes conti-nuous.☞ The system ceases

to be active whenyou change to neutral.

ELECTRIC BOOT

Opening the boot

Vehicle locked / deadlocked☞ Press and hold button A on the

remote control.This action will also unlock thedoors and the fuel filler flap.

Vehicle unlocked☞ Press and hold button A on the

remote control, or press and holdthe push button B on the boot lid.

Closing the boot lidPress the push button C to carryout electric locking of the boot lid.Note: do not hinder closing of theboot lid: any obstacle to closingcauses the boot lid to stop and risea few centimetres automatically.To close the boot lid manually,press the centre until it locks.

Stopping and intermediateposition of the boot lidWhile electric opening or closing ofthe boot lid is in progress, you canstop its movement at any time.☞ press the push button B or C

on the boot lid.or☞ press button A on the remote

control.Note: to leave the intermediateposition, start an electric opening orclosing operation or move the bootlid manually.

140 117


23-06-2003

23-06-2003


VENTILATION

1 - Windscreen de-icing or demisting vents

2 - Front window de-icing or demisting vents

3 - Side vents

4 - Centre vents

5 - Air outlet to the front passengers' feet

6 - Air outlet to the rear passengers' feet

Recommendations for use

For an even air distribution, make sure that you do not obstruct the air inlet grille at the base of the windscreen, the vents,the air passages under the front seats and the air extractor in the boot.

15-07-2002


CHILD SEATSAlthough one of PEUGEOT's main concerns when designing your vehicle, the safety of your children also depends on you.For maximum safety, please follow these precautions:– All children under the age of 10* must travel in a special approved child seat*, adapted to their weight, in a seat fitted with

a seat belt.– Front passenger seat*: children under the age of 10 must not travel in the forwards facing position**.The rearwards facing position is permitted. In this position it is compulsory to disarm the passenger air bag.After carrying out numerous tests, PEUGEOT recommends the following systems:

Up to 18 months (up to 13 kg)

"Britax Babysure": installed with its back to the engine in the front or in the rear using a three-point seat belt.In the front, the passenger seat must be in the 'mid-way' position on the slide.

From 9 months to 3 or 4 years (9 to 18 kg)

"Römer Prince": installed in the rear using a three-point seat belt. For the safety of your child, the seat and the restraining cushion must never be separated.

From 3 to 6 years (15 to 25 kg)

"Römer Vario'': installed in the rear with a three point seat belt.

1

2

3

15-07-2002


Never leave a child or ananimal in a vehicle whichis exposed to the sun andhas the windows closed.

Never leave the keys within reachof children inside the car.

Disarm the passenger air bagwhen installing a rearwards-facingchild seat* in the front.The child would risk being killed orseriously injured if the air bagwere to inflate.Observe strictly the recommenda-tions for assembling or attachingthe child seat as shown in thechild seat instructions.

From 3 to 10 years (15 to 36 kg)''Recaro start'': installed in the rear with a three–point seat belt.The height and width of the seat back must be adjusted according to the ageand the build of your child.

"Klippan Optima": installed in the rear with a three–point seat belt. From theage of 6 years (approximately 22 kg), the booster is used on its own.

Remember, even for short journeys, to fasten the three-point seat belts or thechild seat straps, keeping the slack in relation to the child's body to a minimum. To prevent the doors from opening accidentally, use the child-lock. Also, do not open the rear windows more than a third.

* According to current legislation in the country of destination.** Unless the rear seats are already occupied by other children or the rear seats

cannot be used (because they are missing or folded down). In this case, adjustthe front passenger seat to the rear-most position and leave the air bag active.

4

5

15-07-2002

In accordance with European regulations (Directive 2000/3), the table below indicates to what extent each seat in yourvehicle may be fitted with a child seat:

U : universal categoryU (R) : universal category, rearwards facing and forwards facing, set in the highest position.X : no child seat

According to destination:L1 : BRITAX Babysure E11 0344117 Universal (birth to 13 kg).L2 : RÖMER Prince E1 03301058 Universal (9 to18 kg).L3 : RÖMER Vario E1 03301120 Universal (15 to 25 kg).L4 : RECARO Start E1 03301108 Universal (15 to 36 kg).L5 : KLIPPAN Optima E17 030007 Universal (15 to 36 kg).L6 : KIDDY Isofix Rearwards facing E1 03301123 and Universal (birth to 13 kg)*.L7 : KIDDY Isofix Forwards facing E2 030011 Universal (9 to 18 kg)*.

* See section "Seats - Isofix mountings" for use of the KIDDY child seat on the vehicle's Isofix mountings.

WeightSeat

< 13 kg 9 - 18 kg 15 - 25 kg 22 - 36 kg

Front passengerFixed seat L1, L6 L2, L7 L3, L4, L5 L4, L5

Front passenger U (R) U (R) U (R) U (R)Booster seat (R) L1, L6 L2, L7 L3, L4, L5 L4, L5

Rear passenger U U U USide L1, L6 L2, L7 L3, L4, L5 L4, L5

Rear passenger X X L3, L4, L5 L4, L5Centre


23-06-2003

1 - Driver's sideadjustment

2 - Passenger'sside adjustment

The required value isdisplayed (from 15 to

30: comfort value = 22).

☞ Press the corresponding top andbottom arrows to adjust.


AUTOMATIC AIR CONDITIONINGLocated on the centre console, the control panel is between the multi-functiondisplay and the audio system.

The driver and front passenger can each adjust the temperature and the air dis-tribution, to suit their requirements.

Do not cover the sunshine / brightness sensor located in the centre of thefascia. It helps to regulate the air conditioning, automatic switching on ofthe lights and the automatic adjustment of the instrument panel bright-ness.

3 - Driver comfortprogramme

4 - Passenger comfort programme

☞ Press the 'AUTO' button(s).The system adjusts automatically tothe required value.It also controls the air distribution,flow and intake so that there is suffi-cient air circulation in the passengercompartment.The air flow (fan) symbol and the'AUTO' symbols are displayed.Note: when programme 5 or function11 (following pages) are being used,the 'AUTO' passenger button doesnot operate; it causes temporaryflashing of button 5 or 11 indicatorlight.

23-06-2003

5 - Visibility programme

In certain cases, thecomfort programmemay prove inadequateto demist or de-ice thewindows (humidity,

many passengers, ice).

☞ In this situation, select the visibili-ty programme for rapid clearing ofthe windows.

It manages the air conditioning andthe air flow and intake and distrib-utes the ventilation towards the wind-screen and the side windows.

The symbols 'A/C', 'AUTO' and airflow (fan) are displayed.

Note: for your comfort, between twostarting operations the settings areretained if the temperature of thepassenger compartment has not var-ied a great deal. If it has, automaticmode is used.

Manual adjustment

You may, if you wish, make a differ-ent selection from the one offered bythe system, by manually modifying asetting.

☞ Pressing the 'AUTO' driver orpassenger button enables you toreturn to the corresponding auto-matic operation.

6 - Adjustment ofthe driver's airdistribution

7 - Adjustment ofthe passenger'sair distribution

☞ Pressing the dri-ver's or passen-ger's button severaltimes in succession

allows you to position the air flow onthe driver's or passenger's side,towards:

– the windscreen and the feet,– the feet,– the centre vent, the side vent

and the feet,– the centre vent and the side

vent,– the windscreen.

Note: when programme 5 (followingpage) is being used, button 7 doesnot operate; it causes temporaryflashing of the button 5 indicatorlight.

8 - Air conditioning (A/C) on/off

☞ Press this buttononce to stop the airconditioning.

The symbol 'A/C' goes out.

☞ Press this button again to return toautomatic air conditioning.

The symbol 'A/C' comes on.


23-06-2003

Flashing of the points inthe temperature settingvalues indicates thatthere is a malfunction of

the air conditioning. Contact yourPEUGEOT dealer

9 - Switching offthe system

☞ Press the 'OFF'button.

This action switchesoff the display and the

indicator lights and disarms all thesystem functions, with the exceptionof demisting of the rear screen.

☞ Press this button, button 5 or oneof the two 'AUTO ' buttons again toreactivate the system with the val-ues which were present before itwas switched off.

10 - Air flow

☞ Press buttons '+'and '-' respectivelyto increase ordecrease the airflow.

As the air flow is adjusted, the innersections of the air flow symbol (fan)are filled in accordingly on the dis-play.

11 - Air intake/Recirculation

☞ Press this button torecirculate the inte-rior air.

Recirculation insulatesthe passenger com-

partment from outside smells andsmoke.

Avoid prolonged operation of inte-rior air recirculation (risk of con-densation and deterioration of airquality).

☞ Press this button again to returnair intake to automatic control.

12 -Demisting therear screen

☞ Press this button,with the enginerunning, to demistthe rear screen andthe mirrors.

Demisting stops automatically afterfifteen minutes.

☞ Press again to resume demisting.If the engine is switched off beforethe end of the fifteen minutes,demisting will resume when theengine is switched on again.

Note: it is possible to stop demistingbefore it goes off automatically, bypressing the button again.

Note: the condensation created bythe air conditioning system causes aflow of water under the vehicle whenstationary, which is perfectly normal.


Documents

Peugeot 607 Owners Manual 2003