Upload
hoangminh
View
215
Download
0
Embed Size (px)
Citation preview
Phase Converter CatalogCatalog 601
www.Pemsmotors.Com
PRECISION ELECTRIC MOTOR SALES OWOSSO, MICHIGAN P: 800.234.5687 F: 888.234.5687
PhazPak kB ElEctronics EMsc convErtErs
2 |
Ph
ase
Co
nvert
er
Ca
talo
g
idEal aPPlications...lathes, milling machines, drill presses, sewing machines, grinders
standard solid state | for operating 3-phase 230V motors with single phase 230V input
model
A
B
C
D
E
H
K
1140 hP
1/4-3/4
1-1 1/2
2-3
3
5
7 1/2
10
1725 hP
1/4-1/2
3/4-1
1 1/2-2
3
5
7 1/2
10
3450 hP
1/4-1/3
1/2-3/4
1-1 1/2
2
3
5
7 1/2
diameter
2 3/8”
2 7/8”
length
3 3/4”
4 3/4”
some old large frame motors may require the next larger model
uP to
75% hP
effiCienCyreCommended
motor fuse ProteCtion
hP
1/4
1/3
1/2
3/4
1
1 1/2
2
3
5
7 1/2
10
time delay230v fuses
3 amp
5 amp
5 amp
7.5 amp
10 amp
10 amp
15 amp
20 amp
25 amp
30 amp
40 amp
For usE on light to MEdiuM starting loads, whErE Full hP is not rEquirEd.
standard solid statE ModEls can BE usEd in rEvErsing aPPlications
TYPICAL 2 POLE OFF-ON MOTOR SWITCH
L1 L21 PHASE 230V
L1 L2
Ph
ase
Co
nverte
r Ca
talo
g |
3
Premium solid state | for operating 3-phase 230V motors with single phase 230V input
model
A-R3
B-R3
C-R3
D-R3
E-R3
H-R3
K-R3
N-R3
hP
1/4
1/3
1/3
1/2
3/4
1
1 1/2
2
3
5
7 1/2
10
370v run CaPrequired
5 mfd
10 mfd
10 mfd
15 mfd
20 mfd
30 mfd
40 mfd
45 mfd
70 mfd
110 mfd
160 mfd
200 mfd
diameter
2 3/8”
3”
length
4 3/8”
5 1/2”
For usE on hEavy starting loads, whErE nEar Full hP is rEquirEd.
idEal aPPlications... metal working, farm equipment, food processing, saws, presses,wood working, conveyors, air coMPrEssors (must reduce drive pulley by 20%)
uP to93% hPeffiCienCy
ComPlete unit | with capacitors and enclosure
model
PR-1/4
PR-1/3
PR-1/2
PR-3/4
PR-1
PR-1SS
PR-1.5
PR-2
PR-2SS
PR-3
PR-3SS
PR-5
PR-5SS
PR-7.5
PR-10
hP
1/4
1/3
1/2
3/4
1
1
1 1/2
2
2
3
3
5
5
7 1/2
10
length
10”
12”
width
8”
10”
height
4”
6”
these models are completely assembled with capacitors in NEMA 3R enclosure.motors at or below 900 RPM drop one model size.SS models have a stainless steel enclosure.max start time is 3 seconds.
4 |
Ph
ase
Co
nvert
er
Ca
talo
g
idEal aPPlications... virtually unlimited
For usE on hEavy starting loads, whErE Full hP is rEquirEd.
standard rotary | for operating 3-phase 230V motors with single phase 230V input
diameter length
thEsE ModEls rEquirE an idlEr Motor that is at lEast 50% largEr than thE largEst Motor BEing startEd.
PaCkaged rotary
model
PRT-1
PRT-1.5
PRT-2
PRT-3
PRT-5
PRT-7.5
PRT-10
PRT-15
PRT-20
PRT-25
PRT-30
PRT-40
PRT-50
PRT-60
PRT-75
idler hPrequired
1
1 1/2
2
3
5
7 1/2
10
15
20
25
30
40
50
60
75
length
12”
14”
20”
24”
width
10”
12”
16”
24”
height
6”
8”
includes starter and capacitors assembled in a NEMA 3R enclosure.use only with 1725 RPM idler motors.
less the idler motor
model
A-I
B-I
C-I
D-I
E-I
H-I
K-I
N-I
idler hP @ 1725 rPmrequired (not included)
1/2
3/4
1
1 1/2
2
3
5
7.5
10
15
20
370v run CaPrequired (not included)
15 mfd
20 mfd
30 mfd
40 mfd
50 mfd
70 mfd
110 mfd
160 mfd
220 mfd
320 mfd
400 mfd
2 3/8”
3”
4 3/8”
5 1/2”
less box, capacitors, starter, and idler motor
highEr hP ModEls arE availaBlE... call for details
Ph
ase
Co
nverte
r Ca
talo
g |
5
For usE on hEavy starting loads, whErE Full hP is rEquirEd.
ComPlete rotary | for operating 3-phase 230V motors with single phase 230V input
model
RT-1
RT-1.5
RT-2
RT-3
RT-5
RT-7.5
RT-10
RT-15
RT-20
RT-25
RT-30
RT-40
RT-50
RT-60
RT-75
idler hP
1
1 1/2
2
3
5
7 1/2
10
15
20
25
30
40
50
60
75
rotary rulEs
idler hp should be at least 50% larger than the largest motor being started.
when starting more than one motor at a time, the total combined hp must not exceed 75% of the idler motor hp.
when running more than one motor at a time, the total combined hp must not exceed four times the idler motor hp.
these assemled units contain coverter, starter, switch and capacitors in a NEMA 3R enclousre which are mounted to a TEFC, cast iron, energy efficient idler motor.
completely assembled with idler motor
soFt start and/or 460v ModEls arE availaBlE... call for details
thEsE ModEls can BE convErtEd For usE on cnc MachinEs.
call for details
6 |
Ph
ase
Co
nvert
er
Ca
talo
g
thEsE ModEls coMBinE thE FlExiBility oF a Full FEaturEd drivE with thE convEniEncE oF a PhasE convErtEr all in onE low cost, Easy to usE PackagE.
Phase Converter/variable frequenCy drive
model
KBVF-23D
KBVF-24D
KBVF-26D
KBMA-24D
maX Continuous load Current
2.4 AMPS
4.0 AMPS
5.5 AMPS
3.6 AMPS
figure
A
A
A
B
length
4.3”
4.7”
5.7”
4.9”
width
3.8”4.3”4.7”3.2”
KBMA-24D includes all the features of the KBVF’s with the addition of a NEMA 1 enclosure
height
2.5”5.0”5.7”7.0”
FEaturEs
phase converter operates standard 208/230v, 3-phase ac motors with 115v or 208/230v single phase input (speed potentiometer must be connected)
slip compensation with static auto-tune and boost provide excellent load regulation over a wide speed range.
power starttm provides more than 200% starting torque.
simple operation does not require programming. uses trimpots and jumpers, which are factory set for most applications.
speed range is 60:1 or 30:1 with full motor torque.
main speed potentiometer included with all models.
jumper selection of drive output frequency increases the motor speed up to two times the rated rpm.
ProtEction FEaturEs
motor overload (i2t) with rms current limits: provides motor overload protection which prevents motor burnout and eliminates nuisance trips.
electronic inrush current limit (eicltm): eliminates harmful inrush ac line current during startup.
short circuit: shuts down the drive if a short circuit occurs at the motor (phase-to-phase).
regeneration: eliminates tripping due to bus overvoltage caused by rapid deceleration of high inertial loads.
overvoltage and undervoltage: shuts down the drive if the ac line input voltage goes above or below the operating range.
mov input transient suppression.
microcontroller self monitoring and auto-reboot.
maX hP
1/2
1
2
1
b
a
model prpc-20
FEaturEs
heavy duty light weight aluminum hand truck with stair rails and rubber feet.
energy efficient ao smith odp motor.
push button start/stop control externally mounted on a nema 1 enclosure.
voltage boost switch for extended power cord or low voltage supply.
twist lock outlets fused separately with replaceable time delay fuses.
available in white or hammered grey finish.
30hp model available.
Ph
ase
Co
nverte
r Ca
talo
g |
7
20hP rotary convErtEr on a cart, usEd to run thrEE PhasE EquiPMEnt with 230v singlE PhasE inPut. For starting uP to a 10hP and running uP to 30hP coMBinEd.
www.Pemsmotors.Com
PRECISION ELECTRIC MOTOR SALES OWOSSO, MICHIGAN P: 800.234.5687 F: 888.234.5687