Philips 200p6 Service manual

  • View
    247

  • Download
    7

Embed Size (px)

DESCRIPTION

powe supply etc

Text of Philips 200p6 Service manual

  • 7/17/2019 Philips 200p6 Service manual

    1/78

    Description Page

    Important Safety Notice---- ------------------------------ 2

    Technical Data----------------------------------------------3

    Instalation/On Screen Display------------------------4~8

    Lock/unlock,Aging,Factory mode-----------------------9

    ------------------------------Mechanical Instructions ----------------------------11~12

    Color adjustment -----------------------------------------13

    Warning Message ----------------------------------------14

    Troubleshooting ------------------------------------------15

    Electrical instruction --------------------------------16~17

    DDC Instructions-------------------------------------18~24

    DDC DATA -------------------- ------------------- -----25~27

    ISP Instructions --------------------------------------28~29

    Philips Pixel Defect Policy 10

    Horizontal frequencies30 - 93 kHz

    ervi e

    ervi e

    ervi e

    TABLE OF CONTENTS

    Published byBCUMonitors Printed inSuzhou Copyright reserved Subject tomodification K Mar. 31 2005

    Description Page

    Safety Test Requirments-------------------------------30

    Wiring Diagram------------------ ------------------- -----31

    Block Diagram--------------------------------------------32

    Scaler Diagram&C.B.A. ---------------------------33~40

    Audio Diagram&C.B.A. ----------------------------41~42Control Diagram&C.B.A. --------------------------43~44

    Power Diagram & C.B.A. --------------------------45~48

    Exploded View -------------------------------------------49

    Spare& parts list-----------------50~53

    General product specification--------------------54~70

    Repair tips--------------------------------------------71~72

    Repair Flow chart-----------------------------------73~75

    Different parts list-----------------------------------76~77

    Recommended

    REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES

    CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING.

    ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS

    AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC

    EQUIPMENT CONTAINING HIGH VOLTAGES.

    SAFETY NOTICE

    Chassis: UH6

    3138 106 10462

    20 inch TFT UXGA LCD Colour Monitor

    200P6IS/00200P6EB/00200P6EB/27200P6EG/00200P6ES/00

    200P6ES/27200P6IB/00

    200P6IB/93200P6IG/00200P6IG/93

    200P6IB/75

  • 7/17/2019 Philips 200p6 Service manual

    2/78

    Important Safety Notice2 200P6 LCD

    Go to cover page

    Proper service and repair isimportant to the safe, reliable

    operation of all HPConsumer Electronics Company**

    Equipment. The service procedures recommended by HP and

    described in this service manual are effective methods of

    performing service operations. Some ofthese service

    operations require the use of tools specially designed for the

    purpose. The special tools should be used when and as

    recommended.

    It is important to note that this manual contains various

    CAUTIONS and NOTICES which should be carefully read in

    order to minimize the risk of personal injury to service

    personnel. The possibility exists that improper service

    methods may damage the equipment. It is also important to

    understand that these CAUTIONS and NOTICES ARE NOT

    EXHAUSTIVE. HP could not possibly know, evaluate and

    advise the service trade of all conceivable ways in which

    service might be done or of the possible hazardous

    consequences of each way. Consequently, HP has not

    undertaken any such broad evaluation. Accordingly, a

    servicer who uses a service procedure or tool which is not

    recommended by HP must first satisfy himself thoroughly that

    neither his safety nor the safe operation of the equipment will

    be jeopardized by the service method selected.

    * * Hereafter throughout this manual, HP ConsumerElectronics Company will bereferred to as HP.

    Critical components having special safety characteristics are

    identified with a bythe Ref. No. inthe parts list and

    enclosed within a broken line*

    (where several critical components are grouped in one area)

    along with the safety symbol on the schematics or

    exploded views.

    Use of substitute replacement parts which do not have the

    same specified safety characteristics may create shock, fire,

    or other hazards.

    Under no circumstances should the original design be

    modified or altered without written permission from Philips.

    Philips assumes no liability, express or implied, arising out of

    any unauthorized modification of design.

    Servicer assumes all liability.

    * Broken Line

    WARNING

    Take care during handling the LCD module with backlightunit

    - Must mount the moduleusing mounting holes arranged infour

    corners.

    - Do not press onthe panel, edge of theframe strongly or electric

    shock as this will result in damage to the screen.

    - Do not scratch orpress on the panel withany sharp objects, such

    as pencil or pen asthis may result in damage to the panel.

    - Protect the module fromthe ESD as it maydamage the electronic

    circuit (C-MOS).

    - Make certain that treatment person s body are grounded through

    wrist band.

    - Do not leave themodule in high temperature andin areas of high

    humidity for a long time.

    - Avoid contact with water as it may ashort circuit within the module.

    - If the surface ofpanel become dirty, please wipe it off with a soft

    material. (Cleaning with a dirty or rough cloth may damage the

    panel.)

    FOR PRODUCTS CONTAINING LASER :

    DANGER- Invisible laser radiation when open.

    AVOID DIRECT EXPOSURE TO BEAM.

    CAUTION- Use of controls or adjustments orperformance of procedures other than

    those specified herein may result in

    hazardous radiation exposure.

    CAUTION- The use of optical instruments with this

    product will increase eye hazard.

    TO ENSURE THE CONTINUED RELIABILITY OF THIS

    PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S

    REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART

    NUMBERS IN THE PARTS LIST SECTION OF THIS

    SERVICE MANUAL.

  • 7/17/2019 Philips 200p6 Service manual

    3/78

    3Technical DataGo to cover page

    200P6 LCD

    Pin Assignment

    Input DVI-D connector pin

    Red video input

    Green video input

    Blue video input

    GND

    Cable detect

    Red video GND

    Green video GND

    Blue video GND

    DDC +3.3V OR +5V

    GND

    GND

    Serial data line (SDA)

    H-sync

    V-sync

    Data clock line (SCL)7

    8

    6

    5

    4

    3

    2

    1 9

    10

    11

    12

    13

    14

    15

    Pin No. Pin No.Assignment Assignment

    Pin No. Description

    1 T.M.D.S. data2-2 T.M.D.S. data2+3 T.M.D.S. data2 shield4 No Connect5 No Connect

    6 DDC clock7 DDC data8 No Connect9 T.M.D.S. data1-

    10 T.M.D.S. data1+11 T.M.D.S. data1 shield12 No Connect13 No Connect14 +5V Power15 Ground (for +5V) - Cable detect16 Hot plug detect17 T.M.D.S. data0-18 T.M.D.S. data0+

    19 T.M.D.S. data0 shield20 No Connect21 No Connect22 T.M.D.S clock shield23 T.M.D.S. clock+24 T.M.D.S. clock-

    LCD panel

    Type NR. : LM201U04 (LG.PHILIPS)

    Outside dimensions : 432.0(w)331.5(h)25(d) (Typ) mmPitch ( mm ) : 0.255 (per one triad) x 0.-255mmColor pixel arrangement : RGB vertical stripes

    Display surface : low reflection, antiglare with hard coatingColor depth : 16777216 colors (8 bits)

    Backlight : Six CCFL s

    Active area(WxH) : 408x306mm (20.1 diagonal)

    View angle : Horizontal & Vertical 160 degree (CR>=10)Contrast ratio : 400:1White luminance : Panel original color >200nits (min), 250

    nits (Typ.)Main voltage : AC 90 - 135 Vrms and 170 - 264 Vrms,

    50/60 2 HzPower cord length : 1.8MPower cord type : 3 lead with earth plugPower indicator : LED (ON: blue, Standby: amber, NEW

    MODE: flashing blue twice per secondbefore user adjust and save it.).

    Auto power saving : EPA, Nutek, VESA DPMS

    Horizontal scan : 30 - 97 KHzVertical scan : 56 - 85 Hz

    Horizontal scanningSync polarity :Positive or negativeScanning frequency :30 - 93 K HzVertical scanningSync polarity :Positive or negativeScanning frequency :56 - 85 Hz

    MechanicalPedestal : Detachable

    Tilt angle : -5to 35

    Swivel rotation : 68

    Environmental conditions

    Operating

    -Temperature C : 0c to 35c-Humidity : 80 % max-Altitude : 0-3658m-Air pressure : 600-1100mBAR

    Storage

    -Temperature C : -30 to 60-Humidity : 85% max ( < 40 )

    -Altitude : 0-12192m-Air pressure : 300-1100mBAR

    Note: recommend at 5c to 35C, Humidity less than 60 %

  • 7/17/2019 Philips 200p6 Service manual

    4/78

    4

    Go to cover page

    Installation200P6 LCD

    Front View

    Rear View

    Power cord

    VGA signal cable

    EDFU pack

    PC audio cable (lime)

    Mac adaptor (optional)

    DVI-D cable

    Accessory Pack

    Item Description

    Connecting to Your PC

    1

    2

    3

    4

    5

    6

    7

    8

    9

    10

    To switch monitor's power On and Off

    Power LED

    To access OSD menu

    To adjust the OSD

    To adjust brightness of the display

    To adjust the OSD

    To adjust speak er volume

    Automatically adjust the horizontal position,vertical position, phase and clock setti