Pipe - LP-Gas Equipment Inc. · PDF fileHeavy Weight (Sch 80) in sizes 1/8” through 8”. Carbon Steel Pipe The description for each specification ... Pipe Size STD FS 1/8” 120

119

Pipe

Carbon Steel Pipe Schedule 40 Schedule 80

NominalPipe Size

ODInches

IDInches

Weightper Foot

IDInches

Weightper Foot

1/8” .405 .269 .24 .215 .31

1/4” .540 .364 .42 .302 .54

3/8” .675 .493 .57 .423 .74

1/2” .840 .622 .85 .546 1.09

3/4” 1.05 .824 1.13 .742 1.47

1” 1.315 1.049 1.68 .957 2.17

1-1/4” 1.660 1.380 2.27 1.278 3.00

1-1/2” 1.900 1.610 2.72 1.500 3.63

2” 2.375 2.067 3.65 1.939 5.02

2-1/2” 2.875 2.469 5.79 2.323 7.66

3” 3.500 3.068 7.58 2.90 10.25

4” 4.500 4.026 10.79 3.826 14.98

5” 5.563 5.047 14.62 4.813 20.78

6” 6.625 6.065 18.97 5.761 28.57

8” 8.625 8.071 24.70 7.625 43.39

We stock a complete line of carbon steel pipe in the ASTMspecifications A-53-F, A-53-E and A-106. Standard lengths are 21 ft. We will also cut to order and can thread up to 4”.Pipe will be shipped plain end unless specified differently on the order.

ASTM A-53-F This general service pipe is manufactured by the Continuous Weld (CW) process.Available in Standard Weight (Sch 40) and Extra Heavy Weight (Sch 80) in sizes 1/8” through 4”.

ASTM A-53-E This general service pipe is manufactured by the Electric Resistance Weld (ERW) process.Available in Standard Weight (Sch 40) in sizes 2” through 8”.

ASTM A-106 This carbon steel pipe is manufactured in seamless only.Available in Standard Weight (Sch 40) in sizes 1/8” through 12” and in Extra Heavy Weight (Sch 80) in sizes 1/8” through 8”.

Carbon Steel Pipe

The description for each specification and the sizes available for each specifi-cation are given below

Specifications

Fusion Bond Coated PipeFusion Bond Epoxy (FBE) provides corrosion protection of pipelines and pipe pilings in service in the harshest environ-ments. This field-proven coating protects against soil stress, bacteria and fungus attack, soil acid, alkalis and all other corrosive elements associated with below ground or underwater use. FBE is also resistant to cathodic disbondment in long term performance under a wide range of in-service conditions and ambient temperatures.

Fusion Bond Epoxy has tough physical properties that minimize damage during transit, installation and opera-tion. This coating also demonstrates superior chemical resistance in long term service in a variety of soil condi-tions. FBE protective coatings provide an excellent base for ARO systems and joint coatings.

Steel PipeFusion Bond Coating

120

Pipe Fittings

Threaded Pipe Fittings

90O Elbows 90O Street Elbows 45O Elbows

CouplingsCaps Plugs

STD FS

Class 150 (Standard) Black Malleable Iron fittings are the economical choice for general piping systems at reduced pressure. Fittings in this class are suitable for vapor lines under 125 PSIG. Forged Steel (FS) fittings offer exceptional strength for distortion free make-up in higher pressure piping. These fitting are machined from solid forgings with grain flow and strength designed in. The extended banding allows much greater distortion free tightening than the equivalant malleable iron fittings.

Pipe Size STD FS

1/8” 120 02 -----

1/4” 120 04 420 04

3/8” 120 06 420 06

1/2” 120 08 420 08

3/4” 120 12 420 12

1” 120 16 420 16

1-1/4” 120 20 420 20

1-1/2” 120 24 420 24

2” 120 32 420 32

2-1/2” 120 40 420 40

3” 120 48 420 48

Pipe Size STD FS

1/8” 140 02 -----

1/4” 140 04 440 04

3/8” 140 06 440 06

1/2” 140 08 440 08

3/4” 140 12 440 12

1” 140 16 440 16

1-1/4” 140 20 440 20

1-1/2” 140 24 440 24

2” 140 32 440 32

2-1/2” 140 40 440 40

3” 140 48 440 48

Pipe Size STD FS

1/8” 150 02 -----

1/4” 150 04 450 04

3/8” 150 06 450 06

1/2” 150 08 450 08

3/4” 150 12 450 12

1” 150 16 450 16

1-1/4” 150 20 450 20

1-1/2” 150 24 450 24

2” 150 32 450 32

2-1/2” 150 40 450 40

3” 150 48 450 48

Pipe Size STD FS

1/8” 190 02 -----

1/4” 190 04 490 04

3/8” 190 06 490 06

1/2” 190 08 490 08

3/4” 190 12 490 12

1” 190 16 490 16

1-1/4” 190 20 490 20

1-1/2” 190 24 490 24

2” 190 32 490 32

2-1/2” 190 40 490 40

3” 190 48 490 48

Pipe Size STD FS

1/8” 122 02 -----

1/4” 122 04 422 04

3/8” 122 06 422 06

1/2” 122 08 422 08

3/4” 122 12 422 12

1” 122 16 422 16

1-1/4” 122 20 422 20

1-1/2” 122 24 422 24

2” 122 32 422 32

2-1/2” 122 40 422 40

3” 122 48 422 48

Pipe Size STD FS

1/8” 123 02 -----

1/4” 123 04 423 04

3/8” 123 06 423 06

1/2” 123 08 423 08

3/4” 123 12 423 12

1” 123 16 423 16

1-1/4” 123 20 423 20

1-1/2” 123 24 423 24

2” 123 32 423 32

2-1/2” 123 40 423 40

3” 123 48 423 48

121

Bushings

Reducing Couplings

Pipe Size STD FS

1/4” X 1/8” 180 04X02 480 04X02

3/8” X 1/8” 180 06X02 480 06X02

3/8” X 1/4” 180 06X04 480 06X04

1/2” X 1/8” 180 08X02 480 08X02

1/2” X 1/4” 180 08X04 480 08X04

1/2” X 3/8” 180 08X06 480 08X06

3/4” X 1/4” 180 12X04 480 12X04

3/4” X 3/8” 180 12X06 480 12X06

3/4” X 1/2” 180 12X08 480 12X08

1” X 1/4” 180 16X04 480 16X04

1” X 3/8” 180 16X06 480 16X06

1” X 1/2” 180 16X08 480 16X08

1” X 3/4” 180 16X12 480 16X12

1-1/4” X 1/4” 180 20X04 480 20X04

1-1/4” X 3/8” 180 20X06 480 20X06

1-1/4” X 1/2” 180 20X08 480 20X08

Pipe Size STD FS

1/4” X 1/8” 142 04X02 442 04X02

3/8” X 1/8” 142 06X02 442 06X02

3/8” X 1/4” 142 06X04 442 06X04

1/2” X 1/8” 142 08X02 442 08X02

1/2” X 1/4” 142 08X04 442 08X04

1/2” X 3/8” 142 08X06 442 08X06

3/4” X 1/4” 142 12X04 442 12X04

3/4” X 3/8” 142 12X06 442 12X06

3/4” X 1/2” 142 12X08 442 12X08

1” X 1/4” 142 16X04 442 16X04

1” X 3/8” 142 16X06 442 16X06

Pipe Size STD FS

1-1/4” X 3/4” 180 20X12 480 20X12

1-1/4” X 1” 180 20X16 480 20X16

1-1/2” X 1/4” ----- 480 24X04

1-1/2” X 3/8” ----- 480 24X06

1-1/2” X 1/2” ----- 480 24X08

1-1/2” X 3/4” ----- 480 24X12

1-1/2” X 1” ----- 480 24X16

1-1/2” X 1-1/4” ----- 480 24X20

2” X 1/4” ----- 480 32X04

2” X 3/8” ----- 480 32X06

2” X 1/2” ----- 480 32X08

2” X 3/4” ----- 480 32X12

2 X 1” ----- 480 32X16

2” X 1-1/4” ----- 480 32X20

2” X 1-1/2” ----- 480 32X24

Pipe Size STD FS

1” X 1/2” 142 16X08 442 16X08

1” X 3/4” 142 16X12 442 16X12

1-1/4” X 1/2” 142 20X08 442 20X08

1-1/4” X 3/4” 142 20X12 442 20X12

1-1/4” X 1” 142 20X16 442 20X16

1-1/2” X 1” ----- 442 24X16

1-1/2” X 1-1/4” ----- 442 24X20

2” X 1/2” ----- 442 32X08

2” X 3/4” ----- 442 32X12

2 X 1” ----- 442 32X16

2” X 1-1/4” ----- 442 32X20

Pipe Size STD FS

2-1/2” X 3/4” ----- 480 40X12

2-1/2” X 1” ----- 480 40X16

2-1/2” X 1-1/4” ----- 480 40X20

2-1/2” X 1-1/2” ----- 480 40X24

2-1/2” X 2” ----- 480 40X32

3” X 1/2” ----- 480 48X08

3” X 3/4” ----- 480 48X12

3” X 1” ----- 480 48X16

3” X 1-1/4” ----- 480 48X20

3” X 1-1/2” ----- 480 48X24

3” X 2” ----- 480 48X32

3” X 2-1/2” ----- 480 48X40

Pipe Size STD FS

2” X 1-1/2” ----- 442 32X24

2-1/2” X 1” ----- 442 40X16

2-1/2” X 1-1/4” ----- 442 40X20

2-1/2” X 1-1/2” ----- 442 40X24

2-1/2” X 2” ----- 442 40X32

3” X 1-1/4” ----- 442 48X20

3” X 1-1/2” ----- 442 48X24

3” X 2” ----- 442 48X32

3” X 2-1/2” ----- 442 48X40

STD FS

Pipe Fittings

122

Pipe Fittings

Tees Unions CrossesPipe Size STD FS

1/8” 130 02 -----

1/4” 130 04 430 04

3/8” 130 06 430 06

1/2” 130 08 430 08

3/4” 130 12 430 12

1” 130 16 430 16

1-1/4” 130 20 430 20

1-1/2” 130 24 430 24

2” 130 32 430 32

2-1/2” 130 40 430 40

3” 130 48 430 48

Pipe Size STD FS

1/8” 170 02 -----

1/4” 170 04 470 04

3/8” 170 06 470 06

1/2” 170 08 470 08

3/4” 170 12 470 12

1” 170 16 470 16

1-1/4” 170 20 470 20

1-1/2” 170 24 470 24

2” 170 32 470 32

2-1/2” 170 40 470 40

3” 170 48 470 48

Pipe Size STD FS

1/4” 160 04 460 04

3/8” 160 06 460 06

1/2” 160 08 460 08

3/4” 160 12 460 12

1” 160 16 460 16

1-1/4” 160 20 460 20

1-1/2” 160 24 460 24

2” 160 32 460 32

Steel Pipe NipplesSteel pipe nipples are fabricated from A-53-F steel pipe. Stocked in Standard Weight (Sch 40) and Extra Heavy Weight (Sch 80) in pipe sizes 1/8” to 3”. Lengths from close to 12”.

Convenient 25 pack assortments available in 1/2” & 3/4” pipe sizes. Each pack contains 25 nipples in assorted lengths from close to 6”

Seamless nipples fabricated from A-106 steel pipe are avilable by special order. Call for delivery.

Steel Extra Heavy Swage NipplesSwage nipples are fabricated from either bar stock steel or seamless pipe and comform to ASTM A-234.Stocked in Extra Heavy (Sch 80) only.

Swage Nipple Stock Sizes

Pipe Size Reduced Sizes Length

1/2” 3/8” 3”

3/4” 1/4”, 1/2” 3”

1” 1/4”, 1/2”, 3/4” 3-1/2”

1-1/4” 1/2”, 3/4”, 1” 4”

1-1/2” 1/2”, 3/4”, 1”, 1-1/4” 4-1/2”

2” 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” 6-1/2”

2-1/2” 1-1/2”, 2” 7”

3” 1-1/2”, 2”, 2-1/2” 8”

123

Pipe Fittings

EPCOCLEVELAND

Pipe Size STD FS

1/2” 371 08 471 08

3/4” 371 12 471 12

1” 371 16 471 16

1-1/4” 371 20 471 20

1-1/2” 371 24 471 24

2” 371 32 471 32

2-1/2” 371 40 471 40

3” 371 48 471 48

Dielectric UnionsDielectric unions provide electrical isolation between threaded piping components. Available in Standard Weight and Forged Steel in pipe sizes fron 1/2” through 3”

FSSTD

Insulating Gasket

Insulating Sleeve

Insulating Sleeve

Flange insulation kits provide electrical isolation between flanged piping components. Available for Class 150# and Class 300# flanges in pipe sizes from 1-1/2” through 12”.

Pipe Wrap TapePipe wrap tape is used for corrosion protection of metal pipe, fittings and joints in underground systems. The tape can be applied uniformly without wrinkles or gaps. Should be used with pipe primer for best bonding and protection. Tape stocked in 2” X 100 ft. rolls.Primer stocked in gallon cans.

2” X 100 ft. Tape Primer

Flange Insulation Kits

PIPE PRIMER

Steel Washer

Insulating Washer Insulating Sleeve

Insulating Gasket

TG-1

The TG-1 anode is used to protect steel structures such as buried tanks and piping from various reactive elements commonly encountered in soils. The TG-1 anode is manufactured with the base metal magnesium which is much more reactive than the elements in the soil. The anode will give up its ions to the soil and spare the steel structure from destructive corrosion.

The TG-1 anode will produce between 1.4v to 1.5v potential in most environments. Service life will vary with the resistivity of the environment and the surface area protected. On an average istallation, the TG-1 has a median life of ten years.

Part NumberMagnesium

WeightShippingWeight

TG-1 17# 42#

Magnesium Anode

124

Pipe Fittings

Carbon Steel Butt-Weld Fittings

Thread-O-Let & Weld-O-Let

Carbon Steel Butt-Weld fittings conform to the dimensions of ASME B16.9. The fittings are fabricated with accurate beveled round ends to facilitate ease of a circumferential weld. The Butt-Weld fittings are as strong as, or stronger than, Grade B Seamless Steel Pipe of corresponding thickness. The carbon steel material conforms to ASTM specification A-234 Grade B.Furnished in Standard Wall. Extra Heavy available by special order.

90O Elbow

Reducer

Thread-O-Let

Branch Pipe

Weld-O-Let

Main

Weld-O-Let

Tee Cap

Thread-O-Lets and Weld-O-Lets are designed for strong, easy to install taps on piping runs. The 3000# forged steel bodies are perfectly contoured to fit the piping run for welding.

Thread-O-Lets provide a threaded branch.Weld-O-Lets provide a weld branch.

PartNumber

PipeSize

PF 720 12 3/4”

PF 720 16 1”

PF 720 20 1-1/4”

PF 720 24 1-1/2”

PF 720 32 2”

PF 720 40 2-1/2”

PF 720 48 3”

PF 720 64 4”

PF 720 96 6”

PartNumber

PipeSize

PF 742 16X12 1” X 3/4”

PF 742 20X12 1-1/4” X 3/4”

PF 742 20X16 1-1/4” X 1”

PF 742 24X12 1-1/2” X 3/4”

PF 742 24X16 1-1/2” X 1”

PF 742 24X20 1-1/2” X 1-1/4”

PF 742 32X12 2” X 3/4”

PF 742 32X16 2” X 1”

PF 742 32X20 2” X 1-1/4”

PartNumber

PipeSize

PF 742 32X24 2” X 1-1/2’

PF 742 40X32 2-1/2” X 2”

PF 742 48X20 3” X 1-1/4”

PF 742 48X24 3” X 1-1/2”

PF 742 48X32 3” X 2”

PF 742 48X40 3” X 2-1/2”

PF 742 64X32 4” X 2”

PF 742 64X48 4” X 3”

PF 742 96X64 6” X 4”

PartNumber

PipeSize

PF 750 12 3/4”

PF 750 16 1”

PF 750 20 1-1/4”

PF 750 24 1-1/2”

PF 750 32 2”

PF 750 40 2-1/2”

PF 750 48 3”

PF 750 64 4”

PF 750 96 6”

PartNumber

PipeSize

PF 730 12 3/4”

PF 730 16 1”

PF 730 20 1-1/4”

PF 730 24 1-1/2”

PF 730 32 2”

PF 730 40 2-1/2”

PF 730 48 3”

PF 730 64 4”

PF 730 96 6”

125

Forged Steel Flanges 150-Pound and 300-PoundForged Steel Flanges are available in blind, threaded, weld neck and slip-on configurations in nominal pipe sizes 1/2” through 24”. Furnished with 1/16” raised face unless otherwise specified. Standard bolting dimensions of the popular small sizes are listed below.150-Pound Bolting Dimensions 300-Pound Bolting Dimensions

Threaded

Slip-on

Weld Neck

Blind

Spiraseal Style WR GasketsStyle WR Gaskets have a spiral wound sealing section with a solid metal outer ring. Standard gaskets are manufactured of 304 stainless steel winding and Chlorcarb filler.

3 3/600

FLEXA

SM

E B1 6

2 0

NominalPipeSize

FlangeO.D.

Diamof BoltCircle

Noof

Bolts

Diamof

Bolts

1/2” 3-1/2” 2-3/8” 4 1/2”

3/4” 3-7/8” 2-3/4” 4 1/2”

1” 4-1/4” 3-1/8” 4 1/2”

1-1/4” 4-5/8” 3-1/2” 4 1/2”

1-1/2” 5” 3-7/8” 4 1/2”

2” 6” 4-3/4” 4 5/8”

2-1/2” 7” 5-1/2” 4 5/8”

3” 7-1/2” 6” 4 5/8”

3-1/2” 8-1/2” 7” 8 5/8”

4” 9” 7-1/2” 8 5/8”

5” 10” 8-1/2” 8 3/4”

6” 11” 9-1/2” 8 3/4”

8” 13-1/2” 11-3/4” 8 3/4”

NominalPipeSize

FlangeO.D.

Diamof BoltCircle

Noof

Bolts

Diamof

Bolts

1/2” 3-3/4” 2-5/8” 4 1/2”

3/4” 4-5/8” 3-1/4” 4 5/8”

1” 4-7/8” 3-1/2” 4 5/8”

1-1/4” 5-1/4” 3-7/8” 4 5/8”

1-1/2” 6-1/8” 4-1/2” 4 3/4”

2” 6-1/2” 5” 8 5/8”

2-1/2” 7-1/2” 5-7/8” 8 3/4”

3” 8-1/4” 6-5/8” 8 3/4”

3-1/2” 9” 7-1/4” 8 3/4”

4” 10” 7-7/8” 8 3/4”

5” 11” 9-1/4” 8 3/4”

6” 12-1/2” 10-5/8” 12 3/4”

8” 15” 13” 12 7/8”

PipeSize

GasketO.D.

GasketI.D.

150 lb 300 lb.

RingO.D.

RingO.D.

1-1/4” 2-1/4” 1-7/8” 3” 3-1/4”

1-1/2” 2-5/8” 2-1/8” 3-3/8” 3-3/4”

2” 3-1/4” 2-3/4” 4-1/8” 4-3/8”

2-1/2” 3-3/4” 3-1/4” 4-7/8” 5-1/8”

3” 4-5/8” 4” 5-3/8” 5-7/8”

4” 5-3/4” 5” 6-7/8” 7-1/8”

5” 6-7/8” 6-1/8” 7-3/4” 8-1/2”

6” 8-1/8” 7-3/16” 8-3/4” 9-7/8”

8” 10-1/4” 9-3/16” 11” 12-1/8”

10” 12-3/8” 11-5/16” 13-3/8” 14-1/4”

12” 14-5/8” 13-3/8” 16-1/8” 16-5/8”

PipeSize

GasketO.D.

GasketI.D.

150 lb 300 lb.

RingO.D.

RingO.D.

14” 15-7/8” 14-5/8” 17-3/4” 19-1/8”

16” 18-1/8” 16-5/8” 20-1/4” 21-1/4”

18” 20-5/8” 18-11/16” 21-5/8” 23-1/2”

20” 22-5/8” 20-11/16” 23-7/8” 25-3/4”

24” 26-7/8” 24-3/4” 28-1/4” 30-1/2”

Pipe Fittings

126

Copper Tubing

Copper Tubing

We stock a complete line of soft annealed seamless copper tubing in 100 ft. rolls.

Type K is manufactured to ASTM B88.

Refrigeration tubing is manufactured to ASTM B280.

Order O.D. Sizes Call out flare size firstEx: 48F-6-8

Part numbers are sized in 1/16”

Fittings fit the O.D. of the copper

3/8 Flare 1/2” Male Pipe

Tubing Straps

How to order brass fittings

J Tube Straps Two Hole Straps

Part Number For OD Size

J-8 3/8” & 1/2”

J-10 5/8”

Part Number For OD Size

PF-624 1/4 3/8”

PF-624 3/8 1/2”

PF-624 1/2 5/8”

Copper clad steel to fit the popular copper tubing sizes.

Solid copper two hole straps.

45O Flare Fittings

14FS SHORTFORGED NUT

Part Number For OD Tube

14FS-4 1/4”

14FS-6 3/8”

14FS-8 1/2”

14FS-10 5/8”

14FS-12 3/4”

14FS-14 7/8”

14FS SHORTREDUCING NUT


14FS-6-4 3/8” X 1/4”

14FS-8-6 1/2” X 3/8”

14FS-10-8 5/8” X 1/2”

14FSV SWIVELCONNECTOR


14FSV-4 1/4”

14FSV-6 3/8”

14FSV-8 1/2”

14FSV-10 5/8”

3GF SEALBONNET


3GF-4 1/4”

3GF-6 3/8”

3GF-8 1/2”

3GF-10 5/8”

FittingSize

TubeSize

2 1/8”

3 3/16”

4 1/4”

6 3/8”

FittingSize

TubeSize

8 1/2”

10 5/8”

12 3/4”

14 7/8”

Type K

NomSize

ActualO.D.

WallThick-

ness

Wt. per100

1/4” 3/8” .035” 14.5

3/8” 1/2” .049” 26.9

1/2” 5/8” .049” 34.4

5/8” 3/4” .049” 41.8

3/4” 7/8” .065” 64.1

1” 1-1/8” .065” 83.9

Refrigeration

NomSize

ActualO.D.

WallThick-

ness

Wt. per100

---- 3/8” .032” 13.4

---- 1/2” .032” 18.20

---- 5/8” .035” 25.1

---- 3/4” .035” 30.5

---- 7/8” .045” 45.5

---- 1-1/8” .050” 65.5

127

45O Flared Fittings

48F MALECONNECTORS

Part NumberFor OD

TubePipe Size

48F-4-2

1/4”

1/8”

48F-4-4 1/4”

48F-4-6 3/8”

48F-4-8 1/2”

48F-6-2

3/8”

1/8”

48F-6-4 1/4”

48F-6-6 3/8”

48F-6-8 1/2”

48F-6-12 3/4”

48F-8-2

1/2”

1/8”

48F-8-4 1/4”

48F-8-6 3/8”

48F-8-8 1/2”

48F-8-12 3/4”

48F-10-4

5/8”

1/4”

48F-10-6 3/8”

48F-10-8 1/2”

48F-10-12 3/4”

48F-12-83/4”

1/2”

48F-12-12 3/4”

48F-14-12 7/8” 3/4”

46F FEMALECONNECTORS

Part NumberFor OD

TubePipe Size

46F-4-21/4”

1/8”

46F-4-4 1/4”

46F-6-2

3/8”

1/8”

46F-6-4 1/4”

46F-6-6 3/8”

46F-6-8 1/2”

46F-6-12 3/4”

46F-8-4

1/2”

1/4”

46F-8-6 3/8”

46F-8-8 1/2”

46F-8-12 3/4”

46F-10-6

5/8”

3/8”

46F-10-8 1/2”

46F-10-12 3/4”

42F STRAIGHTUNIONS

Part NumberFor OD

Tube

42F-4 1/4”

42F-6 3/8”

42F-8 1/2”

42F-10 5/8”

42F-12 3/4”

42F-14 7/8”

42F REDUCINGUNIONS

Part NumberFor OD

Tube

42F-6-4 3/8 X 1/4”

42F-8-4 1/2” X 1/4”

42F-8-6 1/2” X 3/8”

42F-10-6 5/8” X 3/8

42F-10-8 5/8” X 1/2”

42F-12-8 3/4” X 1/2”

42F-12-10 3/4” X 5/8”

42F-14-8 7/8” X 1/2”

155F UNIONELBOW

Part NumberFor OD

Tube

155F-4 1/4”

155F-6 3/8”

155F-8 1/2”

155F-10 5/8”

155F-12 3/4”

155F UNIONREDUCING ELBOW

Part NumberFor OD

Tube

155F-6-4 3/8” X 1/4”

155F-8-6 1/2” X 3/8”

155F-10-6 5/8” X 3/8”

155F-10-8 5/8” X 1/2”

639F FLAREDSEAL PLUG

Part NumberFor OD

Tube

639F-4 1/4”

639F-6 3/8”

639F-8 1/2”

639F-10 5/8”

639F-12 3/4”

640F FLAREDCAP

Part NumberFor OD

Tube

640F-4 1/4”

640F-6 3/8”

640F-8 1/2”

640F-10 5/8”

640F-12 3/4”

128

144F FLAREDTEE

Part NumberFor OD

Tube

144F-4 1/4”

144F-6 3/8”

144F-8 1/2”

144F-10 5/8”

144F-12 3/4”

45O Flared Fittings

144F FLARED TEECOMBINATION SIZES

1 2

3

Part NumberSize

1Size

2Size

3

144F-6-6-4

3/8”

3/8” 1/4”

144F-6-6-8 3/8” 1/2”

144F-6-8-8 1/2” 1/2”

144F-6-10-10 5/8” 5/8”

144F-8-6-6

1/2”

3/8” 3/8”

144F-8-8-4 1/2” 1/4”

144F-8-8-6 1/2” 3/8”

144F-8-8-10 1/2” 5/8”

144F-8-10-10 5/8” 5/8”

144F-10-6-6

5/8”

3/8” 3/8”

144F-10-8-8 1/2” 1/2”

144F-10-10-6 5/8” 3/8”

144F-10-8-6 1/2” 3/8”

144F-10-10-8 5/8” 1/2”

144F-12-12-8 3/4” 3/4” 1/2”

145F MALEBRANCH TEE

Part NumberFor OD

TubePipeSize

145F-4-4 1/4” 1/4”

145F-6-4

3/8”

1/4”

145F-6-6 3/8”

145F-6-8 1/2”

145F-8-8 1/2” 1/2”

145F-10-8 5/8” 1/2”

149F MALEELBOWS

Part NumberFor OD

TubePipe Size

149F-4-21/4”

1/8”

149F-4-4 1/4”

149F-6-2

3/8”

1/8”

149F-6-4 1/4”

149F-6-6 3/8”

149F-6-8 1/2”

149F-6-12 3/4”

149F-8-4

1/2”

1/4”

149F-8-6 3/8”

149F-8-8 1/2”

149F-8-12 3/4”

149F-10-6

5/8”

3/8”

149F-10-8 1/2”

149F-10-12 3/4”

149F-12-8 3/4” 1/2”

150F FEMALEELBOWS

Part NumberFor OD

TubePipe Size

150F-4-6 1/4” 3/8”

150F-6-2

3/8”

1/8”

150F-6-4 1/4”

150F-6-6 3/8”

150F-6-8 1/2”

150F-6-12 3/4”

150F-8-4

1/2”

1/4”

150F-8-6 3/8”

150F-8-8 1/2”

150F-8-12 3/4”

150F-10-6

5/8”

3/8”

150F-10-8 1/2”

150F-10-12 3/4”

151F MALERUN TEE

147F FLAREDCROSS

Part NumberFor OD

Tube

147F-4 1/4”

147F-6 3/8”

147F-8 1/2”

147F-10 5/8”

Part NumberFor OD

TubePipeSize

151F-6-6 3/8” 3/8”

151F-6-8 3/8” 1/2”

151F-8-6 1/2” 3/8”

151F-8-8 1/2” 1/2”

41IF INVERTEDFLARE NUT

48IF INVERTEDFLARE MALE CONNECTOR

Part NumberFor OD

Tube

41IF-4 1/4”

Part NumberFor OD

TubePipeSize

48IF-4 1/4” 1/4”

45O

129

Brass Fittings

Compression Fittings60C COMPRESSIONSLEEVE


60C-2 1/8”

60C-3 3/16”

60C-4 1/4”

60C-6 3/8”

60C-8 1/2”

60C-10 5/8”

61C COMPRESSIONNUT


61C-2 1/8”

61C-3 3/16”

61C-4 1/4”

61C-6 3/8”

61C-8 1/2”

61C-10 5/8”

68C MALECONNECTOR

Part NumberFor OD

TubePipeSize

68C-3-4 3/16” 1/4”

68C-4-41/4”

1/4”

68C-4-6 3/8”

68C-6-2

3/8”

1/8”

68C-6-4 1/4”

68C-6-6 3/8”

68C-6-8 1/2”

68C-8-61/2”

3/8”

68C-8-8 1/2”Brass Pipe Fittings

207PCOUPLING

Part Number Pipe Size

207P-2 1/8”

207P-4 1/4”

207P-6 3/8”

207P-8 1/2”

208P REDUCINGCOUPLING


208P-4-2 1/4” X 1/8”

208P-6-4 3/8” X 1/4”

208P-8-6 1/2” X 3/8”

2205PCROSS


2205P-2 1/8”

2205P-4 1/4”

216PHEX NIPPLE


216P-2 1/8”

216P-4 1/4”

216P-6 3/8”

216P-8 1/2”

216P REDUCINGHEX NIPPLE


216P-4-2 1/4” X 1/8”

216P-6-2 3/8” X 1/8”

216P-6-4 3/8” X 1/4”

216P-8-6 1/2” X 3/8”

215PNCLOSE NIPPLE


215PN-4 1/4”

215PN-6 3/8”

215PNLLONG NIPPLE

Part NumberPipe Size Length

215PNL-2-20

1/8”

2”

215PNL-2-25 2-1/2”

215PNL-2-30 3”

215PNL-4-251/4”

2-1/2”

215PNL-4-30 3”

215PNL-6-15 3/8” 1-1/2”

1203PTEE

Part NumberPipeSize

1203P-2 1/8”

1203P-4 1/4”

1203P-6 3/8”

1203P-8 1/2”

1200PELBOW

Part NumberPipeSize

1200P-2 1/8”

1200P-4 1/4”

1200P-6 3/8”

1200P-8 1/2”

130

Brass Pipe Fittings 209PBUSHING

Part NumberPipeSize

209P-4-2 1/4” X 1/8”

209P-6-2 3/8” X 1/8”

209P-6-4 3/8” X 1/4”

209P-8-2 1/2” X 1/8”

209P-8-4 1/2” X 1/4”

209P-8-6 1/2” X 3/8”

209P-12-4 3/4” X 1/4”

209P-12-6 3/4” X 3/8”

209P-12-8 3/4” X 1/2”

1202P STREETELBOW

Part NumberPipeSize

1202P-2 1/8”

1202P-4 1/4”

1202P-6 3/8”

1202P-8 1/2”

218P HEXPLUG

Part NumberPipeSize

218P-2 1/8”

218P-4 1/4”

218P-6 3/8”

218P-8 1/2”

213PCAP

Brass Fittings

Corrugated Stainless Steel Flex ConnectorsEasy to install even in tight places, these rugged flexible connectors are recommended for use with fixed gas appliances. The stainless steel tubing material provides superior corrosion resistance and physical strength for long trouble-free service. The first three corrugations are enclosed within the nut to eliminate the stress fractures commonly found in ordinary “straight-neck connectors”.

*Adapters are tapped 1/2” MNPT on the outside and 3/8” FNPT on the inside.

20-3131-24

Part Number Length NominalO.D. (In)

NominalI.D. (In)

Flare AdapterIncluded*

RecommendedBTU/HR

10-3131-24 24”3/8” 1/4” 3/8” MFlare X 1/2” MNPT

64,000

10-3131-36 36” 53,440

20-3131-24 24”1/2” 3/8” 1/2” MFlare X 1/2” MNPT

136,000

20-3131-36 36” 113,716

20-3131-48 48”

5/8” 1/2” 11/16” MFlare X 1/2” MNPT

96,800

30-3131-24 24” 240,000

30-3131-36 36” 200,000

Part NumberPipeSize

213P-2 1/8”

213P-4 1/4”

213P-6 3/8”

213P-8 1/2”

GasAppliance

212PUNION


212P-2 1/8”

212P-4 1/4”

212P-6 3/8”

131

Corrugated Stainless Tubing

WardFlexTM Corrugated Stainless Steel TubingWardflexTM is a continuous, annular stainless steel gas piping system. It is design certified by the American Gas Association for use in single family, multi-family and light commercial construction.The real advantage of WardflexTM is its flexibility. The restrictions encountered with conventional piping are virtually eliminated. A WardflexTM system eliminates the majority of connections required to pipe a typical gas installation. The fewer the connections, the faster the installation. With fewer connections, there is also less chance of leakage.

Corrugated Stainless Steel Tubing (CSST)

MechanicalJoints - Male

MechanicalJoints - Female

MechanicalTees

WARDFLEX

MechanicalCouplings

PartNumber Description Weight

10AX100 3/8” X 100’ CSS Tubing 11.6 lb

10AX250 3/8” X 250’ CSS Tubing 29 lb

15AX100 1/2” X 100’ CSS Tubing 15.2 lb

15AX250 1/2” X 250’ CSS Tubing 38 lb

20AX100 3/4” X 100’ CSS Tubing 22.2 lb

20AX180 3/4” X 180’ CSS Tubing 40 lb

25AX180 1” X 180’ CSS Tubing 53 lb


WFMJ10AXC 3/8” CSS X 3/8” MNPT .320 lb

WFMJ10A 3/8” CSS X 1/2” MNPT .350 lb



WFMJ25A 1” CSS X 1” MNPT 1.06 lb


WFMJF10A 3/8” CSS X 1/2” FNPT .340 lb



WFMJF25A 1” CSS X 1” FNPT 1.10 lb

Part Number Size

WFT15A 1/2” X 1/2” X 1/2”

WFT15AX10A 1/2” X 1/2” X 3/8”

WFT15AX10AX10A 1/2” X 3/8” X 3/8”

WFT20AX15A 3/4” X 3/4” X 1/2”

WFT20A 3/4” X 3/4” X 3/4”


WFC10A 3/8” CSS Coupling .436 lb



WFC25A 1” CSS Coupling 1.56 lb

132

Corrugated Stainless Tubing

Indoor TerminationFittings


WFTF10A 3/8 Indoor Termination Fitting .880 lb

WFTF15A 1/2 Indoor Termination Fitting .880 lb

WFTF20A 3/4 Indoor Termination Fitting 1.17 lb

WFTF25A 1 Indoor Termination Fitting 1.76 lb

Outdoor TerminationFittings

Manifolds

StripwoundHose

StrikerPlates


WFQSP Quarter Striker Plate .80 lb

WFHSP Half Striker Plate .310 lb

WFFSP Full Striker Plate .560 lb

WFLSP Large Striker Plate 1.070 lb

PVC Stripper

TubingCutter


WFTC Tubing Cutter .530 lb


WFASOXD 1/2” Stub-out .65 lb

ApplianceStub-out


WFFMKIT 1/2” NPT Valve Kit 1.31 lb

RecessedOutlet Box

FullStriker

HalfStriker

LargeStriker

QuarterStriker


WFBWFS PVC Stripper 3/8” & 1/2” .300 lb

WFEWFS PVC Stripper 3/4” & 1” .400 lb


WFMDX3D 3 Port - 1/2” Manifold 1.36 lb

WFMEX3DE 3 Port - 1/2” &1 Port - 3/4” Manifold 1.78 lb


WFGF10A 3/8” X 12” Stripwound Hose .210 lb



WFGF25A 1” X 12” Stripwound Hose .590 lb


WFOTF10A 3/8” Outdoor Termination Fitting .880 lb

WFOTF15A 1/2” Outdoor Termination Fitting .880 lb

WFOTF20A 3/4” Outdoor Termination Fitting 1.18 lb

WFOTF25A 1” Outdoor Termination Fitting 1.75 lb

133

Polyethylene Tubing

Polyethylene Tubing

Polyethylene tubing is manufactured from a yellow PE 2406 material. It meets the requirements specified in ASTM D 2513 for gas piping. Proper installation requires close attention to the following limitations for polyethylene pipe:1. Vapor service only with 30 PSIG maximum operating pressure.2. Outdoor and underground service only.3. IPS (Iron Pipe Size) and CTS (Copper Tubing Size) polyethylene are di-mensionally quite different. Great care must be taken in selecting the fittings to make sure they match the pipe being used.

DimensionsNominal

Size Style SDR*Wall

ThicknessOutside

DiameterCoil

LengthWeightper Coil

1/2” CTS 7.0 .090” .625” 500’ 35 lbs

3/4” IPS 11.0 .095” 1.05” 500’ 60 lbs

1” IPS 11.0 .119” 1.315” 500’ 95 lbs

1-1/4” IPS 10.0 .166” 1.660” 500’ 170 lbs

2” IPS 11.0 .216” 2.375” 500’ 315 lbs

*SDR means Standard Dimension Ratio. It is the ratio of the pipe O.D. to the wall thickness.

Flexible Riser System

This system incorporates flexible, factory assembled risers with service head adapters. There are no joints underground. The polyethylene tubing runs from the first stage regulator directly to the second stage regulator.

The system provides simple, leakproof joints that don’t require specialpipe end prep or special tools.

For 1/2” CTS and 3/4” IPS polyethylene sizes

Flex Riser

Polyethylene Tubing

Flex Riser

1/2” Flare FlexRiser

Tubing

MoistureSeal

CompressionNut

AdapterCoupling

Seal

Typical Residential Flexible Riser Installation

3/4” Pipe FlexRiser

134

Polyethylene Tubing

Rigid Anodeless Risers Transition Risers

Part Number Tubing Size Pipe Size

132132 1” IPS 1” MNPT

166166 1-1/4 IPS 1-1/4” MNPT

238238 2” IPS 2” MNPT

For 3” and Larger TubingFor 1”, 1-1/4” & 2” Tubing

For 1/2” and 3/4” Tubing

Anodeless risers provide a positive transition joint between polythylene pipe and the gas carrying steel pipe of the riser outlet. The riser casing is epoxy coated for long term corrosion protection and incorporates a water tight, below ground seal.

Transition risers are required for the larger tubing sizes. They have the same features as the anodeless models, but are only available in a straight configuration. For most common installations, a fusion elbow is attached to make the turn to vertical.

These flexible risers are used as the terminations on runs of 1/2” and 3/4” polyethylene systems mainly for residential installations. As decribed on the previous page they provide a quick, simple and positive assembly.

1/2” FlexRiser

1/2” Risers

3/4” Risers

3/4” FlexRiser

Flexible Risers (3ft thru 8ft)

Part Number Tubing Flare Length

063063F3F

1/2” CTS 1/2” Flare

3 ft

063063F6F 6 ft

063063F8F 8 ft

Part Number Tubing Pipe Length

105105F3

3/4” IPS 3/4” MNPT

3 ft

105105F6 6 ft

105105F8 8 ft

Poly TailpieceConnect with fusion or mechanical couplingMoisture Seal

NPT Thread

Fusion 90O

Elbow

Fused Joint

Gas Main

PolyTailpiece

SteelNPT

Transition FittingPoly X MNPT

NPT Thread

135

Polyethylene Tubing

Couplings Repair Couplings

Part Number Tubing Size

81063063 1/2” CTS

81105105 3/4” IPS

81132132 1” IPS

81166166 1-1/4 IPS

81238238 2” IPS


81063063L 1/2” CTS

81105105L 3/4” IPS

81105105

Couplings are used to connect two pieces of the same size polythylene tubing together.

Repair couplings have a stab coupling on both ends and are handy for restoring that accidentally cut line.

TeesReducing Couplings


3259-54-1304-00 3/4” IPS X 1/2” CTS

3259-54-1404-00 1” IPS X 1/2” CTS

3259-54-1413-00 1” IPS X 3/4” IPS

3259-54-1513-00 1-1/4” IPS X 3/4” IPS

3259-54-1514-00 1-1/4” IPS X 1” IPS

3259-54-1715-00 2” IPS X 1-1/4” IPS

Tees connect branch piping of the same size polyethylene together.


650047 1/2” CTS

650048 3/4” IPS

3259-50-1014-00 1” IPS

3259-50-1015-00 1-1/4” IPS

3259-50-1017-00 2” IPS

3259-54-1304-00

650048

Con-Stab I.D. Seal® FittingsCon-Stab I.D. Seal® fittings provide a very cost effective joining method for poly pipe. These fittings seal on the internal surface of the pipe and seal regardless of the external surface of the pipe. Simply chamfer the end of the pipe and push to install. Tube stiffener, self-locking grabber and two seals ensure excellent seal.

Reducing couplings are used to connect two pieces of different size polythylene tubing together.

Chamfer Mark Depth Align Insert to depth line

20-1/2”

136

Part Number Capacity

0832022 Up to 1-5/8” O.D.

52015 Up to 3” O.D.

Chamfering Tools

Part Number For Tubing Size

33-5481-00 3/4” IPS & 1/2” CTS

33-5516-00 1” IPS & 3/4” IPS

33-6580-15 1-1/4” IPS

33-6580-17 2” IPS

Detectable TapeMetallic Tape offers reliable location of non-metallic tubing by metal detectors. When buried at least 5” above the gas pipe, it also provides a visual means of detection by the excavator.Tape is 5 mil in 1000 ft. rolls

0832022 52015

LP-2

Tubing Cutters

Tracer Wire12 ga. solid copper coated steel, single conductor wire used for tracing (de-tection) of buried polyethylene pipe. The 30 mil bright yellow HPDE cover provides superior insulation, corro-sion protection and visual detection in direct burial service.Stock 500 ft. coils.1000 ft. coils by special order.

Reducing Tees


650041 3/4” IPS X 3/4” IPS X 1/2” CTS

3259-49-1404-00 1” IPS X 1” IPS X 1/2” CTS

3259-49-1413-00 1” IPS X 1” IPS X 3/4” IPS

3259-49-1715-00 2” IPS X 2” IPS X 1-1/4” IPS 3259-49-1404-00

Double ended toolUsed to chamfer two different sizes

Single ended tool(chamfers and tests)

Polyethylene Tubing

Reducing tees connect branch piping of different size polyethylene together.

ID & ODChamfer

Test Proper chamferO-ring has entered

Improper chamferO-ring not entered

• Removes the sharp, rough end of the pipe• Produces smooth concentric chamfer• Chamfers I.D. & O.D. in one tool

• Eliminates seal damage for both stab & mechanical fittings during installation

• V-blade design cuts without deforming wall• Instant release mechanism• Quick, automatic opening• Ratcheting action reduces cutting effort

Poly Pipe

Rothenberger

Documents

Pipe - LP-Gas Equipment Inc. · PDF fileHeavy Weight (Sch 80) in sizes 1/8” through 8”. Carbon Steel Pipe The description for each specification ... Pipe Size STD FS 1/8” 120