Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
PUMPKIN STENCILS • DIY COSTUMES • DECORATIONS • ACTIVITIES • GAMES • RECIPE
WHAT’S INSIDE
PIXMA TS SERIES TOOLKIT
HALLOWEEN
Pumpkin carving kit (or a serrated knife and spoon)
Tape
SUPPLIES
1. Prepare the pumpkin by cutting a hole on the top around the stem and scooping out the seeds.
2. Print and tape the stencil onto your pumpkin.
3. Use a push pin or a similar tool to poke a hole every 1/8 inch along the outline of the stencil.
4. Remove the stencil and tape, then cut along the dotted outline of the pattern on the pumpkin using carving tools.
5. Display your pumpkin for Halloween!
INSTRUCTIONS
SMILING FACEPUMPKIN STENCILS
Tip: Print on Canon Matte Photo Paper for best results.
BLACK CATPUMPKIN STENCILS
Pumpkin carving kit (or a serrated knife and spoon)
Tape
SUPPLIES
Tip: Print on Canon Matte Photo Paper for best results.
1. Prepare the pumpkin by cutting a hole on the top around the stem and scooping out the seeds.
2. Print and tape the stencil onto your pumpkin.
3. Use a push pin or a similar tool to poke a hole every 1/8 inch along the outline of the stencil.
4. Remove the stencil and tape, then cut along the dotted outline of the pattern on the pumpkin using carving tools.
5. Display your pumpkin for Halloween!
INSTRUCTIONS
Scissors
Low-temp hot glue gun
Headband
SUPPLIES
©2017 LiaGriffith.com (for personal use only)
This printable template is brought to you by the team at www.LiaGriffith.com and is for Personal Use only.For more DIY projects, Paper Craft, Home Décor ideas and inspiration visit www.LiaGriffith.com
HALLOWEEN WITCH HAT (Page 1 of 3)
DIY COSTUMES
Tip: Print on Canon Matte Photo Paper for best results.
INSTRUCTIONS
Cut out the hat from the template, including the cut marks on the brim.
Form hat into a cone and glue the edge closed. Curling the paper on the edge of a table will make it easier.
Fold tabs on brim into cone of the hat and glue.
Curl bow loop ends to the center and glue. Glue the small strip around the center to cover.
Flip over the bow and glue ribbon ends onto the back.
Glue bow onto the front of the witch hat. Glue the inside edge of the hat on both sides to a headband to wear.
HALLOWEEN WITCH HAT (Page 2 of 3)
DIY COSTUMES
Tip: Print on Canon Matte Photo Paper for best results.
©2017 LiaGriffith.com (for personal use only)
HALLOWEEN WITCH HAT (Page 3 of 3)
DIY COSTUMES
Tip: Print on Canon Matte Photo Paper for best results.
©2017 LiaGriffith.com (for personal use only)
Scissors or utility knife
Glue stick
Hole puncher
Rubber band or elastic string
SUPPLIES
©2016 Mayumi IiwanishiVisit the Canon Creative Park for more ideas! http://cp.c-ij.com/en/
INSTRUCTIONS
1. Cut out templates and fold along dotted lines. Apply glue stick to the tabs with blue dots then press the tabs in place.
4 5
1 2
3
BAT MASK (Page 1 of 3)
DIY COSTUMES
Tip: Print on Canon Matte Photo Paper for best results.
2. Apply glue stick on the back side of Template 4 and 5, then press in place on the back side of the mask.
3. Punch a hole where indicated, then use rubber bands or elastic string to create ear bands.
1
2
©2016 Mayumi Iiwanishi
BAT MASK (Page 2 of 3)
DIY COSTUMES
Tip: Print on Canon Matte Photo Paper for best results.
BAT MASK (Page 3 of 3)
5
4
3
©2016 Mayumi Iiwanishi
DIY COSTUMES
Tip: Print on Canon Matte Photo Paper for best results.
CAT EARS
Scissors
Glue stick
Headband
SUPPLIES
1. Print and cut out the cat ears.
2. Fold cat ears along the dotted line.
3. Apply glue stick to the back side of the cat ears.
4. Wrap a cat ear around a headband and press together. Repeat for the other cat ear.
5. Wear the headband trick or treating and enjoy!
INSTRUCTIONS
DIY COSTUMES
Tip: Print on Canon Matte Photo Paper for best results.
HALLOWEEN CUTOUTSDECORATIONS
Tip: Print on Canon Matte Photo Paper for best results.
GIFT TAGSDECORATIONS
Scissors
Hole puncher
String
SUPPLIES
1. Print and cut out the pumpkin-shaped gift tags.
2. Punch a hole on the pumpkin stems using a hole puncher.
3. Take a piece of string and pull it through the hole, then tie a knot.
4. Attach the tag to your Halloween goody bag!
INSTRUCTIONS
Tip: Print on Canon Matte Photo Paper for best results.
PARTY FLAGSDECORATIONS
Scissors
Double-sided tape or glue stick
SUPPLIES
1. Print and cut out the party flags.
2. Apply double-sided tape or glue stick to the back side of the party flags.
3. Wrap the party flags around a straw, toothpick, or lollipop stick, then press together for an extra happy Halloween!
INSTRUCTIONS
Add party flags to the Halloween Mashmallow Pops on our Recipe page to make Halloween even sweeter!
Tip: Print on Canon Matte Photo Paper for best results.
boo!
COLORING PAGEACTIVITIES
Tip: Print on Canon Matte Photo Paper for best results.
1. Enjoy your surprise treats.
2. Place the "You've Been Booed" sign on your front door or window.
3. Within 2 days, make 2 copies of these instructions and the "You've Been Booed" sign. Don't forget treats!
4. Secretly deliver to 2 neighbors who haven't been booed yet!
KEEP IT GOING BY FOLLOWING THESE DIRECTIONS
YOU'VE BEEN BOOEDACTIVITIES
Tip: Print on Canon Matte Photo Paper for best results.
WE,VE BEEN
BOOED!
YOU,VE BEEN
BOOED!
HICTW
IPMKUPN
ATRET
EOLNEHWAL
MYMUM
KPOSYO
KTIRC
KMSA
HTSGO
DRSEPI
EIMRPVA
ETEKNSLO
IBOZME
LUKSL
WORD SCRAMBLEGAMES
Answers: Witch, Pumpkin, Treat, Halloween, Mummy, Spooky, Trick, Mask, Ghost, Spider, Vampire, Skeleton, Zombie, Skull Tip: Print on Canon Matte Photo Paper for best results.
MAZEGAMES
Tip: Print on Canon Matte Photo Paper for best results.
Print and cut out the memory game pieces along the dotted line. Place the memory game pieces picture side down, scramble, and try to find Halloween matches!
HOW TO PLAY
MEMORY GAMEGAMES
Tip: Print on Canon Matte Photo Paper for best results.
Large white marshmallows
Assorted colored chocolate candy melting wafers
Assorted sprinkles
4” lollipop sticks or clean wooden sticks
Wax or parchment paper
INGREDIENTS
1. Cover baking sheet with wax or parchment paper.
2. Insert lollipop sticks or clean wooden sticks into each marshmallow.
3. Melt the chocolate candy melting wafers according to package instructions.
4. Dip marshmallows into melted chocolate candy, allowing excess to drip off.
5. Immediately coat the dipped marshmallows with sprinkles.
6. Place marshmallows upright on prepared baking sheet until candy coating is firm.
7. Enjoy your scary good snack!
DIRECTIONS
RECIPE Tip: Print on Canon Matte Photo Paper for best results.
HALLOWEEN
MARSHMALLOW POPS