Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
SPECIFICATION
Note
PROD. CODE
SIZE
AGE RANGE
F/ FALL HEIGHT
HEAVIEST PART
TOTAL WEIGHT
PLAYALIVE
SPIDERPLAYALIVE-SO1
6.5 x 4.6m
6 - 15 Years
2.6m
Playalive - SO11 of 15
STEEL Stainless (304)
BODY Plastic
SATELLITES The 18 watertight satellites each contain a touch sensor with lightand sound as well as a mini-computer.
NET High-grade nylon rope with the Polyfix connector system. Polyfix is safetycertified and contains no PVC.
PLAYALIVE-SO1
2 of 15
SURFACING & WETPOUR DETAILS
59.5 sq Metres Wetpour Surfacing33.0 sq Metres 120mm Wetpour26.72 sq Metres 60mm Wetpour30 sq Linear Metres Wetpour Edging
100mm Wetpour
PLAYALIVE - SO1
3 of 15
Surfacing Details
Spacer Bar Details
Spacer Bars to be placed between thelegs to ensure the correct distancebetween the individual legs.
120mm Wetpour60mm WetpourOn Middle Legs
900,0
0
400,00
PLAYALIVE - SO1
4 of 15
FIN
ISH
ED
SU
RF
AC
EL
EV
EL
OVERALL DIMENSIONS
N.B
NOTE THAT DEPTH OF LEGS WILL VARY SUBJECT TO THE DESIRED SURFACE MATERIAL OF THECUSTOMER (BARK SHOWN)
PLAYALIVE - SO1
5 of 15
LEG
MIN, 150cm from end of Spider to end of safetey surfacing (Bark shown).
The depth of the legs will vary depending on type of safety surfacing.
FOUNDATION DETAILS
LOWER SHELL
CENTRE PIECE
UPPER SHELL
LEG 2LEG 1
LEG 3
LEG 6
LEG 5
LEG 4
Rear Net(x1)
Side Net(x4)
OVERVIEW OF PARTS
Rear Connector Pole(X1)
Side Connector Pole(x4)Top Net
(x4)
After concreting all legs, the play areamust be fenced off with HerasFencing.The Spider can be used 24 hoursafter concreting.
150mm
PLAYALIVE - SO1
6 of 15
CONSTRUCTION OF BODY AND LEGS
CENTRE PIECE
Place centre piece on a stand or similarwith an exact height of 145cm
ASSEMBLY OF LEGS AND CONNECTOR POLES
1. Attach back left leg 4 by using M16 Flat Washers x2 and M16 Nuts x2 top nutshown. Copper slip must be applied to the studding prior to securing legs withM16 nuts & flat washers
Note that there are 5 configurations of the legs, therefore it is important thatthey are assembled correctly for the positioning of the nets.
14
5cm
FRONT
PLAYALIVE - SO1
7 of 15
ASSEMBLY OF LEGS & CONNECTOR POLES, continued
2. Fix back right leg 3using M16 Flat Washersx2, M16 Nuts x2.
2.1 Attach RearConnector Pole with Type2 Connector Inserts and fixwith M4 Torx Heads.
3. Attach middle legs 2 &4 with previous method.Using one of theremaining ConnectorPoles for each side.
3.1 Fix legs with Type 1Connector Inserts and M4Torx Head Screws.Maintaining correctorientation of net fixinglugs.
4. Attach Front Legs 1 &6 with previous method.Using remaing ConnectorPoles.
4.1 Fix legs with Type 1Connector Inserts and M4Torx Head Screws.Maintaining correctorientation of net fixinglugs.
Pre drill Ø2mm
3 Lugs this side3 Lugs this side
3 Lugs this side3 Lugs this side
PLAYALIVE - SO1
8 of 15
ATTACHING NETS
5. Attach Side Nets x4 first using M6Shackles x76 as shown.
5.1 Attach Top Nets x4 with M6Shackles x28.
5.2 Attach Back Net x1 with M6Shackle x9
PLAYALIVE- SO1
9 of 15
INTERNAL BATTERY MOUNTING PLATE
6. Insert battery mounting plate into centre piece and turn 90°. Attach to centrepiece using M8 x 65 Hex Head Bolt x 4, M8 Washer x 8, Mounting Plate Spacerx 4 & M8 Spring Washers.
6.1 Cable connector plate can be attached to either side of the mounting platewith M8 x 25 Pent Button Head x 2, M8 Plain Washers x 4 and M8 Nyloc Nut x 2
CABLE CONNECTOR PLATE
Battery Securing Plate
Spacers
Battery Mounting Plate
PLAYALIVE - SO1
10 of 15
SATELLITE POSITIONS
DATA CABLE 24V
0 2 4 6 8 10 12 14
1 3 5 7 9 11 13 15
Satellite number.
DATA CABLE LENGTHS
5.5m DATA CABLE - YELLOW2.5m DATA CABLE - RED
1.0m DATA CABLE - GREEN
All satellites will be numbered and must be positioned in the correct location.Satellite i.d printed on underside of satellite.
Cable Connector Box
PLAYALIVE - SO1
11 of 15
CABLES INSERTED INTO LEGS
CABLES FOR SATELLITES ONUPPER AND LOWER BODY SHELL
MALE PLUG ON CABLE MUST BEDRAGGED TO THE BODY SHELL
FEMALE PLUG
2.5m Data Cable
5.5m Data Cable
1.0m Data Cable Inside Body
Power cable to be covered at a depthof 500mm
CABLES DEPTH
Distance to power supply and theclosest leg must not exceed 25m
PLAYALIVE - SO1
12 of 15
MOUNTING OF SATELLITES IN BODY SHELL
NOTEAll Satellites Must Have Correct Orientation Of "P" Logo.
7. Attach all Lower Steel Security Covers and Top Covers to satellites using M4x 6mm Triangular Heads before positioning onto body and legs.
Note that body covers do not have bottom fixing lugs
8. Attach Inner and OuterAdapters to the Spider Body usingM5 x 16mm Cap Head Screws.
8.1 After fixing Protective covers(No Lugs) to satellite attach toouter adapter by removing theright angled fixing bracket. Usingexisting screws x3 to fix throughthe main body.
FIXING LUGS
FIXING SECURITY COVERS TO SATELLITES
TableNumer Of Lugs Satellite Number Position
3 8,9,10,11,12 & 13 Upper
2 2,3,4,5,6 and 7 Lower
0 0,1,14 and 15 Body
N.B
Align internal lugs before connecting the upper & lower covers
PLAYALIVE - SO1
13 of 15
Mounting Upper And Lower Shell To Body
9. Attach lower and upper shells to centrepiece using M5 x 16mm Dome Head Screwsx 16 ensuring copper slip is used.
10. Position the Leg To BodyInfill Lug on to body then fixthrough leg using M6 Cap Head
FIXING LEG TO BODY PLASTIC INFILLS
PLAYALIVE - SO1
14 of 15
PARTS LIST
DESCRIPTIONPART NUMBERQTYITEM
Battery Mounting Assembly4201-41011
Centre RingP-MA 00212
M16 WashersP-H 058123
M16 NutP-H 057124
Front Left LegP-MA 00315
Middle LegP-MA 00426
Rear Left LegP-MA 00517
Rear Right LegP-MA 00618
Front Right LegP-MA 00719
Side Connector PoleP-MA 008410
Back Connector PoleP-MA 009111
Connector Type AP-MP 020812
Connector Type BP-MP 021213
Body To Leg Plastic InfillP-MP 015614
S/Tapping M4 Torx Head2015
M6 Button Heads616
M6 Washers617
Top CoversP-MM0341618
Bottom Leg Covers (2 Holes)P-MM033619
Bottom Leg Covers (3 Holes)P-MM032620
Bottom Body Covers421
M4 x 6mm Triangular Heads6422
Shackles11823
Side Net424
Top Net425
Back Net126
1m Data CablePS-04-1427
3m Data CablePS-04-3628
6m Data CablePS-04-6629
SatellitesP-SP 001A1630
M5 x 16mm Torx Head5031
Cable Connector132
M5 x 16mm433
M5 Nut434
M5 Washer435
Plastic Upper BodyP-SP 003A136
Plastic Lower BodyP-H 051137
REV
ECN
SIG.
DATE:
COMPILED
DATE:
PLAYALIVE - M01
15 of 15
TE
02/09/09
PARTS LIST
DESCRIPTIONPART NUMBERQTYITEM
External Body AdaptorP-SP 003A438
Internal Body AdaptorP-H 051439
M4 x 16mm2040
M4 Washers2041
Spacer Bars5901-877442
M8 Nuts2193-052843
01591
TE02/09/09
1minor
TE02/09/09
2minor
TE15/12/09 22/01/19
MC
Minor
3
Disposing of electrical and electronic equipment incorrectly can have anadverse effect on the environment, at the end of this equipments working life itis essential that it is disposed under the current EU approveddirective/legislation. Please dispose of this equipment with consideration tothe Waste Electronic and Electrical Equipment Regulations 2006 (WEEERegulations). If you are unsure of your requirements at the time of removingthis equipment please contact Wicksteed Playscapes for advice.