Plumboss Tube & Piping Tools

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00

6 Armada Place, Banyo Qld 4014(cnr of Nudgee Road)Ph: 07 3326 1500 Fax: 07 3326 1599

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


plumBOSS Australia was established in 1986 and has since built a reputation as a national supplier of tradesman quality tools.

plumBOSS tools enable our trades professionals to maintain and exceed in high quality service by providing leading, innovative tools and brands you can rely on. plumBOSS Australia carries a range of high performing products exclusive to our customers only. plumBOSS has a proven history of product designs that are leading the industry. You can be confident then that when you use plumBOSS tools you are ensuring your effort is at its highest quality and greatest performance.

plumBOSS is owned and operated by trade professionals who have hands on experience on the worksite, therefore we understand the high standard you demand from your tools and we deliver on this.So next time you suit up for work, make sure you’re using,

plumBOSS...

...the professionals choice in tool supplies.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


plumBOSS Australia was established in 1986 and has since built a reputation as a national supplier of tradesman quality tools.

plumBOSS tools enable our trades professionals to maintain and exceed in high quality service by providing leading, innovative tools and brands you can rely on. plumBOSS Australia carries a range of high performing products exclusive to our customers only. plumBOSS has a proven history of product designs that are leading the industry. You can be confident then that when you use plumBOSS tools you are ensuring your effort is at its highest quality and greatest performance.

plumBOSS is owned and operated by trade professionals who have hands on experience on the worksite, therefore we understand the high standard you demand from your tools and we deliver on this.So next time you suit up for work, make sure you’re using,

plumBOSS...

...the professionals choice in tool supplies.

CONTENTS

1 TubE wORkINg TOOlS

2 PIPE wORkINg TOOlS

5 TEST PlugS

3 ThREaDINg & gROOvINg EquIPMENT

4 wRENChES & vICES

6 DRaIN ClEaNINg

TUBE BENDERSBRANCHFORMERSBRAZING & SOLDERING EQUIPMENTTUBE CUTTERS NIPPLE CUTTER DEBURRING TOOLSCROX TOOLS TUBE EXPANDERSFLARING TOOLS COPPER SHUT-OFF TOOLSTESTING EQUIPMENT ELECTRIC THERMOMETERCUTTER WHEELS

ADJUSTABLE WRENCHES

CHAIN WRENCHES

ONE HAND WRENCHS

TORQUE WRENCHS

VALVE WHEEL WRENCHESSELF ADJUSTABLE PIPE WRENCHES

PIPE WRENCHESROLLNUT WRENCHES

SMOOTH JAW WRENCHESSTRAP WRENCHES - REED THRU-BOLT WRENCHES & SOCKETSDUAL SIZE PODGER WRENCHES CHAIN VICESVICES PIPE JACKSROLLER PIPE STAND FIELD PIPE VICE - REED

HAND PIPE THREADERS POWER OPERATED THREADERS POWER OPERATED ROLL GROOVERS

HAND OPERATED ROLL GROOVERS

PIPE BENDERS

PLASTIC PIPE CUTTERS

DEBURRERPLUMBOSS POLY PIPE WELDING

PE SHUT-OFF TOOLS FIRE HYDRANT STOPPERS

PLASTIC PIPE BEVELLERS

STEEL PIPE CUTTERS

LARGE CUTTERS

MANUAL CHAIN CUTTERS

HYDRAULIC CHAIN CUTTERSHYDRAULIC PIPE CUTTER& POWER PACK UNIVERSAL PIPE CUTTER

PCS8+ PIPE CUTTING SYSTEM

BAND SAW

DM2100BSPT DRILLING MACHINE

PIPE JOINERS PIPE LOCATORS

FOG GENERATORPIPE DESCALERS

PIPE FREEZING EQUIPMENT MANHOLE LID LIFTERS / WATER KEYS

MECHANICAL TEST PLUGS

PNEUMATIC TEST PLUGSACCESSORIES FOR PNEUMATICTEST PLUGS

DRAIN TEST CAPS

DIAGNOSTIC INSPECTION CAMERASDRAIN CLEANING EQUIPMENTPOWER OPERATED

HAND OPERATED TOP SNAKESSNAP LOK SEWER RODS & ACCESSORIESCOIL SPRING DRAIN RODS & ACCESSORIESPOLYPROPYLENE RODS & ACCESSORIESSTEELFLEX RODS & ACCESSORIES

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


7 hOlE SawS

8 ShEET METal

9 gENERal TOOlS

10 valvE bOXES

BI-METAL HOLE SAWS - MORSE TUNGSTEN CARBIDE TIPPED HOLE SAWS

HOLE SAW LUBRICANTHOLE SAW TOOL BOX

APPRENTICE KITSTOOL BOX & BUCKET MATEABRASIVE DISCS

BLADES - DIAMOND

HAND SAWS

HACK SAWS

THREADED ROD CUTTERS

BOLT CUTTERS

VALVE BOXES

POWA PLUNGAGULLY SCOOPS

EXTENDASCOPE CLOSET AUGER

KINO 10 KINETIC WATER RAM KYCO20 KYNA - COLT BLOCKAGE GUN

CLOG BUSTER

DRAIN RAT

SINK PLUNGERS

DRAIN TRACING DYE

METALMASTER SNIPSOFFSET SNIPS - WISSHEAVY DUTY SNIPS - WISS

WISS SNIP SPRINGS

PLUMBOSS AVIATION SNIP

SNIPS

JEWELLERS’ SNIPS

HEAVY DUTY SHEARS

PARTS FOR SNIPS

HEAVY DUTY TURBO SHEAR

DRESSERS & MALLETS

PUNCHES / KLIKINSSHEET METAL CRIMPERS

SHEET METAL FOLDERRIVETERS

NIPPLE CUTTER

DRILL BITS

KNIVES

SCREW DRIVERSSCREW DRIVER BITSKEY SETS - BONDHUS

SOCKET SETSPLIERS

BEVELSSQUARES & RULERSTAPE MEASURESMEASURING WHEEL

LEVELS

SPOT MARKING PAINT

CHALK LINES & REPLACEMENTSSTRING LINES

PLUMB BOB

PENCILS & CRAYONSDOUBLE ENDED SCRIBERTAP PULLER

TAP RESEATERSRIVETERS

CAULKING GUNSBRUSHES

RUBBER BUCKETFILESTIE DOWN STRAPSLUGGAGE STRAPS

MIRRORS

NAIL BAGS

POWER LEADS & LEAD HOOKS

SAFETY GEAR

BRICK BOLSTER

CHISELSHAMMERSCROW BARS & WRECKING BARS

SHOVELS / PICKS / HANDLESTROWELS / FLOATS

WORKING LIGHT

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


7 hOlE SawS

8 ShEET METal

9 gENERal TOOlS

10 valvE bOXES

BI-METAL HOLE SAWS - MORSE TUNGSTEN CARBIDE TIPPED HOLE SAWS

HOLE SAW LUBRICANTHOLE SAW TOOL BOX

APPRENTICE KITSTOOL BOX & BUCKET MATEABRASIVE DISCS

BLADES - DIAMOND

HAND SAWS

HACK SAWS

THREADED ROD CUTTERS

BOLT CUTTERS

VALVE BOXES

POWA PLUNGAGULLY SCOOPS

EXTENDASCOPE CLOSET AUGER

KINO 10 KINETIC WATER RAM KYCO20 KYNA - COLT BLOCKAGE GUN

CLOG BUSTER

DRAIN RAT

SINK PLUNGERS

DRAIN TRACING DYE

METALMASTER SNIPSOFFSET SNIPS - WISSHEAVY DUTY SNIPS - WISS

WISS SNIP SPRINGS

PLUMBOSS AVIATION SNIP

SNIPS

JEWELLERS’ SNIPS

HEAVY DUTY SHEARS

PARTS FOR SNIPS

HEAVY DUTY TURBO SHEAR

DRESSERS & MALLETS

PUNCHES / KLIKINSSHEET METAL CRIMPERS

SHEET METAL FOLDERRIVETERS

NIPPLE CUTTER

DRILL BITS

KNIVES

SCREW DRIVERSSCREW DRIVER BITSKEY SETS - BONDHUS

SOCKET SETSPLIERS

BEVELSSQUARES & RULERSTAPE MEASURESMEASURING WHEEL

LEVELS

SPOT MARKING PAINT

CHALK LINES & REPLACEMENTSSTRING LINES

PLUMB BOB

PENCILS & CRAYONSDOUBLE ENDED SCRIBERTAP PULLER

TAP RESEATERSRIVETERS

CAULKING GUNSBRUSHES

RUBBER BUCKETFILESTIE DOWN STRAPSLUGGAGE STRAPS

MIRRORS

NAIL BAGS

POWER LEADS & LEAD HOOKS

SAFETY GEAR

BRICK BOLSTER

CHISELSHAMMERSCROW BARS & WRECKING BARS

SHOVELS / PICKS / HANDLESTROWELS / FLOATS

WORKING LIGHT

TERMS & CONDITIONS

TERMS AND CONDITIONS FOR THE USE OF THIS CATALOGUEAll pictured brands and specifications are subject to change at any time without notice. Non-genuine parts may be advertised with reference to the original manufacturer’s trade name and/or part number for identification purposes only. All trademarks and trade names are the property of their respective owners E. & O.E. All transactions are subject to Plumboss Australia’s General Sales Terms and Condi-tions printed in the pricelist.

DIMENSIONS AND SPECIFICATIONSProduct details quoted within this catalogue, dimensions and specifications are approximate and subject to commercial tolerances and may be subject to change without notice. Where items become unavailable, every effort will be made to supply an equivalent alternative.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


1tube working tools

1.1 TUBE BENDERS 2

1.2 BRANCHFORMERS 7

1.3 BRAZING & SOLDERING EQUIPMENT 11

1.4 TUBE CUTTERS 14

1.5 NIPPLE CUTTER 18

1.6 DEBURRING TOOLS 19

1.7 CROX TOOLS 20

1.8 TUBE EXPANDERS 20

1.9 FLARING TOOLS 23

1.10 COPPER SHUT-OFF TOOLS 27

1.11 TESTING EQUIPMENT 27

1.12 ELECTRONIC THERMOMETER 32

1.13 CUTTER WHEELS 33

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


1.1 TUBE BENDERS

PRODUCT CODE DESCRIPTION DISCOUNT QTY.FHA06 TUBE BENDER 3/8” SILVA 3FHA08 TUBE BENDER 1/2” SILVA 3FHA10 TUBE BENDER 5/8” SILVA 3FHA12 TUBE BENDER 3/4” plumBOSS 3

364FHA10 IMPERIAL 5/8” TUBE BENDER 3


FHA12-01 WHEEL FOR (FHA12) N/A

FHA12-02 HOOK FOR 3/4” TUBE BENDER (FHA12) N/AFHA12-03 HOOK SCREW FOR (FHA12) N/A

FHA12-04 PIVOT BOLT FEMALE FOR (FHA12) N/A

FHA12-05 PIVOT BOLT MALE FOR (FHA12) N/A

FHA12-14 HOOK SCREW WASHER FOR (FHA12) N/A

LEVER TYPE - ONE PIECE BENDERS

For soft copper, aluminium, brass and steel tubing. �

Single size benders for 1/4”, 3/8”, �

1/2”, 5/8” and 3/4” available. Open side design slips over tube at any point. �

Makes smooth, short radius bends �

up to 180° with minimum effort.Leaves no scoring or flattening of tubing. �

Wide hook grips tubing securely. �FHA08: Style furnished for 1/4” through 1/2” O.D. Tubing

FHA12: Style furnished for 5/8” and 3/4” O.D. Tubing

Easy 90° Start

TUBE WORKING TOOLS

2PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


1.1 TUBE BENDERS

PRODUCT CODE DESCRIPTION DISCOUNT QTY.FHA06 TUBE BENDER 3/8” SILVA 3FHA08 TUBE BENDER 1/2” SILVA 3FHA10 TUBE BENDER 5/8” SILVA 3FHA12 TUBE BENDER 3/4” plumBOSS 3



FHA12-01 WHEEL FOR (FHA12) N/A

FHA12-02 HOOK FOR 3/4” TUBE BENDER (FHA12) N/AFHA12-03 HOOK SCREW FOR (FHA12) N/A

FHA12-04 PIVOT BOLT FEMALE FOR (FHA12) N/A

FHA12-05 PIVOT BOLT MALE FOR (FHA12) N/A

FHA12-14 HOOK SCREW WASHER FOR (FHA12) N/A

LEVER TYPE - ONE PIECE BENDERS

For soft copper, aluminium, brass and steel tubing. �

Single size benders for 1/4”, 3/8”, �

1/2”, 5/8” and 3/4” available. Open side design slips over tube at any point. �

Makes smooth, short radius bends �

up to 180° with minimum effort.Leaves no scoring or flattening of tubing. �

Wide hook grips tubing securely. �FHA08: Style furnished for 1/4” through 1/2” O.D. Tubing

FHA12: Style furnished for 5/8” and 3/4” O.D. Tubing

Easy 90° Start

TUBE WORKING TOOLS

2PLUMBOSS

AUSTRALIA

PRODUCT CODE DESCRIPTION DISCOUNT QTY.364FHB06 SWIVEL HANDLE TUBE BENDER 3/8” IMPERIAL 3364FHB08 SWIVEL HANDLE TUBE BENDER 1/2” IMPERIAL 3

1.1 TUBE BENDERSCONT SWIVEL HANDLE TUBE BENDERS

For soft copper, aluminium, brass, �

steel and stainless steel tubing. Single size bender for 1/2” �

(1/4”, 5/16”, 3/8” and 7/16” also available) Swivel handle can be repositioned midway �

through a bend when both handles begin to meet. This simple feature allows easy fabrication of bends up to 180° with reduced effort, better control and without crossing of handles which is typical of most other lever type benders.

3 TU

BEW

ORKI

NGTO

OLS

SERV

ING

AUST

RALI

A’SPL

UMBE

RSSI

NCE

1986

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


1.1 TUBE BENDERSCONT

HEAVY DUTY TUBE BENDERS

New design for accurate bends up to 180º �

in stainless steel and other tough metalsPatented, quick action trigger release repositions �

two-stage handle midway through bend when both handles begin to meet. This feature allows easy fabrication of bends up to 180º with reduced effort, better control and no crossing of handles!Rollers in bending handle reduce friction and �

bending effort; eliminate scoring of tubing.Comfortable and durable ergonomically �

moulded cushion grips.Vice lug for mounting in vice.�

LEVER TYPE - TWO PIECE BENDERS

For soft or hard copper, aluminium �

and chrome plated tubing. 90°and 45° bends can be formed by bending �

firmly to respective indicators on forming head An extremely strong alloy to B.S.D.T �

5008 is used on the bender head and fork to ensure long life and light weight.Knurled handles assist grip, making bender easier �

to control. The two handles readily separate for quick loading and also

allow for working in confined spaces.The nylon guide ensures a smooth finish�

especially when bending chrome plated tubing.

PRODUCT CODE DESCRIPTION464FH06 HEAVY DUTY 180º TUBE BENDER 3/8” IMPERIAL 464FH08 HEAVY DUTY 180º TUBE BENDER 1/2” IMPERIAL

PRODUCT CODE DESCRIPTION DISCOUNT QTY.BALTB12 TUBE BENDER TWO PIECE 1/2” plumBOSS 3BALTB34 TUBE BENDER TWO PIECE 3/4” plumBOSS 3

PARTSBALTB12NG NYLON GUIDE - SUIT 1/2” BENDER N/ABALTB34NG NYLON GUIDE - SUIT 3/4” BENDER N/A

TUBE WORKING TOOLS

4PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



HEAVY DUTY TUBE BENDERS

New design for accurate bends up to 180º �

in stainless steel and other tough metalsPatented, quick action trigger release repositions �

two-stage handle midway through bend when both handles begin to meet. This feature allows easy fabrication of bends up to 180º with reduced effort, better control and no crossing of handles!Rollers in bending handle reduce friction and �

bending effort; eliminate scoring of tubing.Comfortable and durable ergonomically �

moulded cushion grips.Vice lug for mounting in vice.�

LEVER TYPE - TWO PIECE BENDERS

For soft or hard copper, aluminium �

and chrome plated tubing. 90°and 45° bends can be formed by bending �

firmly to respective indicators on forming head An extremely strong alloy to B.S.D.T �

5008 is used on the bender head and fork to ensure long life and light weight.Knurled handles assist grip, making bender easier �

to control. The two handles readily separate for quick loading and also

allow for working in confined spaces.The nylon guide ensures a smooth finish�

especially when bending chrome plated tubing.

PRODUCT CODE DESCRIPTION464FH06 HEAVY DUTY 180º TUBE BENDER 3/8” IMPERIAL 464FH08 HEAVY DUTY 180º TUBE BENDER 1/2” IMPERIAL

PRODUCT CODE DESCRIPTION DISCOUNT QTY.BALTB12 TUBE BENDER TWO PIECE 1/2” plumBOSS 3BALTB34 TUBE BENDER TWO PIECE 3/4” plumBOSS 3

PARTSBALTB12NG NYLON GUIDE - SUIT 1/2” BENDER N/ABALTB34NG NYLON GUIDE - SUIT 3/4” BENDER N/A

TUBE WORKING TOOLS

4PLUMBOSS

AUSTRALIA


5 TU

BEW

ORKI

NGTO

OLS

PLUM

BOSS

- AU

STRA

LIA’S

OWN

PLUM

BING

TOOL

SPEC

IALI

STS

PRODUCT CODE DESCRIPTIONTB3456 QUAD BENDER 3/16”, 1/4”, 5/16”, 3/8” REED

MULTI-SIZE LEVER BENDER

For soft copper, brass, aluminium and steel tubing �

For 3/16”, 1/4”, 5/16” & 3/8” O.D tubing �

Allows up to 180° bends �

Calibrated angle markings every 15°, with �

separate gauge marks for right, left and normal.

MANUAL LEVER TYPE TUBE BENDER 1/2” - 1” cap.

Bends: mild steel up to 1.6mm wall �

thickness, aluminium up to 3mm wall thickness, stainless steel up to 1.6mm wall thickness and copper tube (hard drawn only) Supplied with a set of 5 formers (1/2”, 5/8”, 3/4”, �

7/8” & 1”) and a follow roller to suit round tube.Optional extras: 1 1/8” former, flat�

bar former and square formers MUST BE BENCH OR PEDESTAL MOUNTED�

PRODUCT CODE DESCRIPTIONTBRD TUBE BENDER 1/2” - 1” cap.

TBSTAND STAND TO SUIT TUBE BENDER

TUBE BENDER AND STAND ARE SOLD SEPERATLY

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



SPRING TYPE TUBE BENDERS

These spring type tube benders allow hand �

bending of soft copper and aluminium tubing to any shape without collapsing wall of tubing.

KK Bending Springs are designed for easy �

installing onto tube and easy removal from the tube. The spring is slightly over-sized so it slides easily along the tube. Once the spring is at the desired position turn the two thumb holds to decrease the overall size of the spring. After completing the bend release the thumb holds and the spring will enlarge to allow easy removal.Set by twisting the bending

spring on a tube. Once spring is twisted bend tube.

GEAR TYPE TUBE BENDER

For 1” O.D tubing. Other sizes available.�

For aircraft grade stainless steel (MIL-T-6845) �

and all other metal tubing of bending temper.Spur gear type with 10 to 1 ratio for easy bending.�

Floating shoe aligns tube perfectly �

on calibrated forming wheel.Pull-pin on wheel speeds �

repositioning for bends over 90°.Portable, can be hand-held, clamped �

in a vice or bolted to a bench.

PRODUCT CODE DESCRIPTION270-F16 GEAR TYPE TUBE BENDER 1”

PRODUCT CODE DESCRIPTIONBS10EXT EXTERNAL BENDING SPRING 3/8” (10mm)BS15INT INTERNAL BENDING SPRING 1/2” (15mm)BS15EXT EXTERNAL BENDING SPRING 1/2” (15mm)BS18INT INTERNAL BENDING SPRING 5/8” (18mm)BS18EXT EXTERNAL BENDING SPRING 5/8” (18mm)BS20INT INTERNAL BENDING SPRING 3/4” (20mm)BS20EXT EXTERNAL BENDING SPRING 3/4” (20mm)BS25INT INTERNAL BENDING SPRING 1” (25mm)BS25EXT EXTERNAL BENDING SPRING 1” (25mm)KKBS15 EXTERNAL BENDING SPRING 1/2” (15mm)KKBS16 EXTERNAL BENDING SPRING 5/8” (16mm)KKBS20 EXTERNAL BENDING SPRING 3/4” (20mm)KKBS25 EXTERNAL BENDING SPRING 1” (25mm)

TUBE WORKING TOOLS

6PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



SPRING TYPE TUBE BENDERS

These spring type tube benders allow hand �

bending of soft copper and aluminium tubing to any shape without collapsing wall of tubing.

KK Bending Springs are designed for easy �

installing onto tube and easy removal from the tube. The spring is slightly over-sized so it slides easily along the tube. Once the spring is at the desired position turn the two thumb holds to decrease the overall size of the spring. After completing the bend release the thumb holds and the spring will enlarge to allow easy removal.Set by twisting the bending

spring on a tube. Once spring is twisted bend tube.

GEAR TYPE TUBE BENDER

For 1” O.D tubing. Other sizes available.�

For aircraft grade stainless steel (MIL-T-6845) �

and all other metal tubing of bending temper.Spur gear type with 10 to 1 ratio for easy bending.�

Floating shoe aligns tube perfectly �

on calibrated forming wheel.Pull-pin on wheel speeds �

repositioning for bends over 90°.Portable, can be hand-held, clamped �

in a vice or bolted to a bench.

PRODUCT CODE DESCRIPTION270-F16 GEAR TYPE TUBE BENDER 1”

PRODUCT CODE DESCRIPTIONBS10EXT EXTERNAL BENDING SPRING 3/8” (10mm)BS15INT INTERNAL BENDING SPRING 1/2” (15mm)BS15EXT EXTERNAL BENDING SPRING 1/2” (15mm)BS18INT INTERNAL BENDING SPRING 5/8” (18mm)BS18EXT EXTERNAL BENDING SPRING 5/8” (18mm)BS20INT INTERNAL BENDING SPRING 3/4” (20mm)BS20EXT EXTERNAL BENDING SPRING 3/4” (20mm)BS25INT INTERNAL BENDING SPRING 1” (25mm)BS25EXT EXTERNAL BENDING SPRING 1” (25mm)KKBS15 EXTERNAL BENDING SPRING 1/2” (15mm)KKBS16 EXTERNAL BENDING SPRING 5/8” (16mm)KKBS20 EXTERNAL BENDING SPRING 3/4” (20mm)KKBS25 EXTERNAL BENDING SPRING 1” (25mm)

TUBE WORKING TOOLS

6PLUMBOSS

AUSTRALIA

7 TU

BEW

ORKI

NGTO

OLS

AUST

RALI

A’STR

USTE

DPL

UMBI

NGBR

AND


1.2 BRANCHFORMERS

COMPOSITE BENDERS

For bending DN15 and DN20 composite pipe

POWER OPERATED BRANCHFORMING EQUIPMENT

T-35BFK KIT INCLUDES:

1 - TD35 Power Unit 1 - Detachable Power Cord 1 each - ½”, ¾” & 1” Collaring Heads 1 - Lubricant Applicator 1 - KKMP Marking Pliers 1 - Hex Key

T-60BFK KIT INCLUDES:

1 - T-60 Power Unit 1 - Detachable Power Cord 1 each - ½”, ¾”,1”,1 ¼”,1 ½”, & 2“ Collaring Heads 1 - Lubricant Applicator 1 - KKMP Marking Pliers 2 - Hex Keys

T35 POWER UNIT

T60 POWER UNIT

PRODUCTCODE

DESCRIPTION

COM12 TUBE BENDER FOR DN15 COMPOSITECOM34 TUBE BENDER FOR DN20 COMPOSITE

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


1.2 BRANCHFORMERSCONT

DETACHABLE POWER CORD

LUBRICANT APPLICATOR

T-DRILLS are available P.O.A for up to 4” copper and for stainless steel branching

COLLARING HEAD

MARKING PLIERS

PRODUCT CODE DESCRIPTIONCOPPER BRANCHFORMING KITS

T-35BFK T-DRILL BRANCHFORMING KIT ½” - 1”T-60BFK T-DRILL BRANCHFORMING KIT ½” - 2”

TD5330646 T-35 BRANCHFORMING POWER UNIT ONLYTD5330501 T-60 BRANCHFORMING POWER UNIT ONLY

INDIVIDUAL COLLARING HEADS FOR COPPERTD5310400 T-DRILL COLLARING HEAD 1/2”TD5310464 T-DRILL COLLARING HEAD 3/4”TD5310405 T-DRILL COLLARING HEAD 1”TD5310414 T-DRILL COLLARING HEAD 1 1/4”TD5310412 T-DRILL COLLARING HEAD 1 1/2”TD5310413 T-DRILL COLLARING HEAD 2”

OTHER T-DRILL ACCESSORIESTD5300134 T-DRILL LUBRICANT APPLICATOR W/-LUBRICANT 100mLTD5090294 ND54 TUBE NOTCHER

KKMP MARKING PLIERSKKFH FILE AND HANDLE

TUBE WORKING TOOLS

8PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



DETACHABLE POWER CORD

LUBRICANT APPLICATOR

T-DRILLS are available P.O.A for up to 4” copper and for stainless steel branching

COLLARING HEAD

MARKING PLIERS

PRODUCT CODE DESCRIPTIONCOPPER BRANCHFORMING KITS

T-35BFK T-DRILL BRANCHFORMING KIT ½” - 1”T-60BFK T-DRILL BRANCHFORMING KIT ½” - 2”

TD5330646 T-35 BRANCHFORMING POWER UNIT ONLYTD5330501 T-60 BRANCHFORMING POWER UNIT ONLY

INDIVIDUAL COLLARING HEADS FOR COPPERTD5310400 T-DRILL COLLARING HEAD 1/2”TD5310464 T-DRILL COLLARING HEAD 3/4”TD5310405 T-DRILL COLLARING HEAD 1”TD5310414 T-DRILL COLLARING HEAD 1 1/4”TD5310412 T-DRILL COLLARING HEAD 1 1/2”TD5310413 T-DRILL COLLARING HEAD 2”

OTHER T-DRILL ACCESSORIESTD5300134 T-DRILL LUBRICANT APPLICATOR W/-LUBRICANT 100mLTD5090294 ND54 TUBE NOTCHER

KKMP MARKING PLIERSKKFH FILE AND HANDLE

TUBE WORKING TOOLS

8PLUMBOSS

AUSTRALIA

9 TU

BEW

ORKI

NGTO

OLS

THE

TUBE

& P

IPE

TOOL

SPEC

IALI

STS


THE ORIGINAL - KKHAND OPERATED BRANCHFORMING EQUIPMENT

Eliminates up to 90% of T-Fitting purchases �

Reduces inventory �

One braze joint replaces 3 soldered joints �

No need for tube cutting �

Reduces tube preparation time �

Less assembly time �

Reduces scrap on the job �

66% fewer joints �

Less chance for leaks or call backs �

DIMPLE - NOTCHING

When the dimples are on the side, the end of the branch tube must be shaped. When the dimples are along the main tube, the end of the branch tube need not be shaped.

BRANCHFORMING KITS AVAILABLE IN 1” and 2”

COMBI TOOL KITS INCLUDE BENDING SPRINGS AND AN EXPANDER

KKB02 KITKKB01 contains:½” Branch former ¾” Branch former1” Branch formerAdjustable Drill ⅜” - 2 ⅛” Ratchet Wrench Marking Pliers File & Handle Plastic Tool Box

KKB02 contains: ½” Branch former ¾” Branch former 1” Branch former 1 ¼” Branch former 1 ½” Branch former 2” Branch formerAdjustable Drill ⅜” - 2 ⅛” Ratchet Wrench Marking Pliers File & Handle Plastic Tool Box

KKC10 contains: 1/2” Branch former 3/4” Branch former 1” Branch former Adjustable Drill ⅜” - 2 ⅛” Ratchet Wrench Marking Pliers File & Handle Set of Bending. Springs ½”, ¾”,1” Super Expander ⅜”- 1” Plastic Tool Box

KKC20 contains:1/2” Branch former 3/4” Branch former 1” Branch former 1 1/4” Branch former 1 1/2” Branch former 2” Branch former Adjustable Drill ⅜” - 2 ⅛” Ratchet Wrench Marking PliersFile & Handle Set of Bending Springs ½”, ¾”,1” Super Expander ⅜”- 1”

BRANCH

DRILL

SOLDER

1/2”-4” REFRIGERATION SIZES AVAILABLE

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



PRODUCT CODE DESCRIPTIONBRANCHFORMING KITS

KKB01 BRANCHFORMING TOOL KIT NO. 1 ½”-1” KKB02 BRANCHFORMING TOOL KIT NO. 2 ½”-2”KKC10 COMBI BRANCHFORMING KIT 1/2”- 1”KKC20 COMBI BRANCHFORMING KIT 1/2”- 2”

INDIVIDUAL BRANCHFORMING TOOLS KKBF06 BRANCHFORMING TOOL ¼”KKBF15 BRANCHFORMING TOOL ½”

KKBF20 BRANCHFORMING TOOL ¾”

KKBF25 BRANCHFORMING TOOL 1”KKBF32 BRANCHFORMING TOOL 1 1/4”KKBF40 BRANCHFORMING TOOL 1 1/2”KKBF50 BRANCHFORMING TOOL 2”KKBF65 BRANCHFORMING TOOL 2 1/2” (HOLE SIZE 37X42)KKBF75 BRANCHFORMING TOOL 3” (HOLE SIZE 42X50)KKBF100 BRANCHFORMING TOOL 4” (HOLE SIZE 60X80)

REFRIGERATION SIZES: KKBF10 BRANCHFORMING TOOL 3/8”KKBF16 BRANCHFORMING TOOL 5/8”KKBF22 BRANCHFORMING TOOL 7/8”KKBF29 BRANCHFORMING TOOL 1 1/8”KKBF35 BRANCHFORMING TOOL 1 3/8”KKBF41 BRANCHFORMING TOOL 1 5/8”KKBF54 BRANCHFORMING TOOL 2 1/8”KKBF67 BRANCHFORMING TOOL 2 5/8”

INDIVIDUAL COMPONENTSKKAD ADJUSTABLE DRILL 3/8”- 2 1/8”

KKADP ADJUSTABLE DRILL POINT 3/8”- 2 1/8”KKRW RATCHET WRENCHKKMP MARKING PLIERSKKRM ROLL MANDRELL 1/4”-1/2”KKFH FILE & HANDLE 8”

KKBS15 BENDING SPRING 1/2”KKBS20 BENDING SPRING 3/4”KKBS25 BENDING SPRING 1”KKPTB PLASTIC TOOL BOX

TUBE WORKING TOOLS

10PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



PRODUCT CODE DESCRIPTIONBRANCHFORMING KITS

KKB01 BRANCHFORMING TOOL KIT NO. 1 ½”-1” KKB02 BRANCHFORMING TOOL KIT NO. 2 ½”-2”KKC10 COMBI BRANCHFORMING KIT 1/2”- 1”KKC20 COMBI BRANCHFORMING KIT 1/2”- 2”

INDIVIDUAL BRANCHFORMING TOOLS KKBF06 BRANCHFORMING TOOL ¼”KKBF15 BRANCHFORMING TOOL ½”

KKBF20 BRANCHFORMING TOOL ¾”

KKBF25 BRANCHFORMING TOOL 1”KKBF32 BRANCHFORMING TOOL 1 1/4”KKBF40 BRANCHFORMING TOOL 1 1/2”KKBF50 BRANCHFORMING TOOL 2”KKBF65 BRANCHFORMING TOOL 2 1/2” (HOLE SIZE 37X42)KKBF75 BRANCHFORMING TOOL 3” (HOLE SIZE 42X50)KKBF100 BRANCHFORMING TOOL 4” (HOLE SIZE 60X80)

REFRIGERATION SIZES: KKBF10 BRANCHFORMING TOOL 3/8”KKBF16 BRANCHFORMING TOOL 5/8”KKBF22 BRANCHFORMING TOOL 7/8”KKBF29 BRANCHFORMING TOOL 1 1/8”KKBF35 BRANCHFORMING TOOL 1 3/8”KKBF41 BRANCHFORMING TOOL 1 5/8”KKBF54 BRANCHFORMING TOOL 2 1/8”KKBF67 BRANCHFORMING TOOL 2 5/8”

INDIVIDUAL COMPONENTSKKAD ADJUSTABLE DRILL 3/8”- 2 1/8”

KKADP ADJUSTABLE DRILL POINT 3/8”- 2 1/8”KKRW RATCHET WRENCHKKMP MARKING PLIERSKKRM ROLL MANDRELL 1/4”-1/2”KKFH FILE & HANDLE 8”

KKBS15 BENDING SPRING 1/2”KKBS20 BENDING SPRING 3/4”KKBS25 BENDING SPRING 1”KKPTB PLASTIC TOOL BOX

TUBE WORKING TOOLS

10PLUMBOSS

AUSTRALIA

11

TUBE

WOR

KING

TOOL

SIM

PORT

ERS

& MA

NUFA

CTUR

ERS

OF P

LUMB

ING

EQUI

PMEN

T

1.3 BRAZING/SOLDERING EQUIPMENT

PRIMARY COMBUSTION TORCHES WITH SWIRL FLAME

These create a greater target heat �

with less chance of blow-out Trigger start self igniting torch head �

Adjustable flame height �

Lock button for continuous operation�

Operates on MAP//PRO™ OR Propane (MAP/ �

PRO™ Gas burns 22% faster than Propane) Replaceable stainless steel burn tip �

Pressure regulated for consistent �

performance at any job angleUltra swirl flame �

PRODUCT CODE DESCRIPTION DISCOUNT QTY.TS799 SWIVEL TORCH HEAD N/A

TS8000BT SUREFIRE TURBO TORCH N/ATS8000BZKC SUREFIRE TURBO TORCH WITH 399.7g MAP//PRO™ GAS 3 AND 6

21197 ULTRASWIRL FLAME BURN TIP (TO SUIT TS8000BT) N/A21179 REPLACEMENT ASSEMBLY (TO SUIT TS8000BT) N/AMT1 MAP//PRO™ GAS CYLINDER 399.7g MIN BUY 12

21179 21197

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


1.3 BRAZING/SOLDERING EQUIPMENTCONT

OXY/ACETYLENE PROFESSIONAL WELDING AND CUTTING SET Includes:

Torch Handle (Blow Pipe) �

Cutting Attachment �

Mixer�

Welding Tips �

Cutting Tips �

Oxygen Regulator �

Acetylene Regulator �

Twin Hose 5mm X 10M�

Goggles�

Flint Gun �

Cylinder/Oxy Key �

Combination Spanner Wrench �

Tip Cleaner�

(Spare hoses are also available �

in 5m, 10m and 15m.)

OXY/LPG KIT Includes:

Blowpipe Handle�

Cutting Attachment�

Mixer�

Oxy Regulator�

LPG Regulator�

5 Welding/Brazing Tips�

3 Cutting Tips�

Twin Hose Assembly�

Tip Cleaners�

Flint Lighter�

Oxy Goggles�

Multi Purpose Spanner�

Manufactured under ISO-9001 Certified Quality Control System. Regulators, Cutting attachments, blowpipe and all tips are individually leak and pressure tested.

TUBE WORKING TOOLS

12PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



OXY/ACETYLENE PROFESSIONAL WELDING AND CUTTING SET Includes:

Torch Handle (Blow Pipe) �

Cutting Attachment �

Mixer�

Welding Tips �

Cutting Tips �

Oxygen Regulator �

Acetylene Regulator �

Twin Hose 5mm X 10M�

Goggles�

Flint Gun �

Cylinder/Oxy Key �

Combination Spanner Wrench �

Tip Cleaner�

(Spare hoses are also available �

in 5m, 10m and 15m.)

OXY/LPG KIT Includes:

Blowpipe Handle�

Cutting Attachment�

Mixer�

Oxy Regulator�

LPG Regulator�

5 Welding/Brazing Tips�

3 Cutting Tips�

Twin Hose Assembly�

Tip Cleaners�

Flint Lighter�

Oxy Goggles�

Multi Purpose Spanner�

Manufactured under ISO-9001 Certified Quality Control System. Regulators, Cutting attachments, blowpipe and all tips are individually leak and pressure tested.

TUBE WORKING TOOLS

12PLUMBOSS

AUSTRALIA

13

TUBE

WOR

KING

TOOL

S


OXY SET PLUMBERS SPECIAL

Oxygen Regulator�

Acetylene Regulator�

3 Welding Tips (10, 12 and 15)�

Heating Head�

Blowpipe�

Mixer�

Set of Oxygen and Fuel Gas Standard �

Flow Regulator End Flashback ArrestorsSet of Oxygen and Fuel Gas Standard �

Flow Torch End Flashback Arrestors5m Twin Oxygen and Acetylene Hose�

Welding Goggles�

Set of Tip Cleaners�

Multi-Purpose Spanner�

Flint Gun�

PRODUCT CODE DESCRIPTIONLGT2580WA OXY/ACETYLENE PROFESSIONAL WELDING & CUTTING SET

LGT-PS OXY SET PLUMBERS SPECIAL (NO CUTTING ATTACHMENTS)4-OXLPK OXY/LPG KITLGTH05 OXY/ACETYLENE HOSE 5MLGTH10 OXY/ACETYLENE HOSE10MLGTH15 OXY/ACETYLENE HOSE 15M

BT08 SIZE 8 BRAZING TIPBT10 SIZE 10 BRAZING TIPBT12 SIZE 12 BRAZING TIPBT15 SIZE 15 BRAZING TIPBT20 SIZE 20 BRAZING TIP

FLINT GUNS -Replaceable TipFG01 FLINT GUN

FSP10 SPARE FLINTS (10Pk)

PLUM

BOSS

SUPP

LY P

LUMB

ING,

INDU

STRI

AL,E

LECT

RICA

L & R

EFRI

GERA

TION

TOOL

S

FLASH BACK ARRESTORS CAN BE PURCHASED SEPERATELY

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


1.4 TUBE CUTTERS

MINI CUTTERS

For use in extremely tight places, these tube cutters require minimal swing around the tubing.

The REED MC1 features the smallest cutting radius in the industry and finer thread on screw for easier tightening.

The heavy duty MC2 is the strongest mini cutter available. Larger, deeply knurled knob allows easier tightening. MC3 has an even larger capacity

SWIFT SLICE

Swift Slice is the fastest way to cut copper tubing. No adjusting of cutter wheel is necessary, simply twist a few times and your cut is complete. The integrated self adjust mechanism makes cutting so easy you only need one hand to do it. How swift is that?

MC1, MC2, MC3

SWIFT SLICE

PRODUCT CODE DESCRIPTION CUTTER WHEELMC1 MINI CUTTER 1/8”- 5/8” (4mm-15mm) REED 32633MC2 MINI CUTTER 1/8”- 15/16” (3mm-24mm) REED 345T *MC3 MINI CUTTER 1/8”- 1 1/8” (3mm-28mm) REED 0 *

127 MINI CUTTER 1/8”- 5/8” (4mm-15mm) 3263321009 MINI CUTTER 1/8”- 1” (3mm-25mm) 345T *

174 MINI CUTTER 3/8”- 1 1/8”(10mm-28mm) 75015*KPS12 SWIFT SLICE 1/2” KPSWKPS34 SWIFT SLICE 3/4” KPSWKPSW SPARE WHEEL TO SUIT KPS12 & KPS34

* WHEELS ALSO AVAILABLE TO CUT STAINLESS STEEL – SEE CHART ON PAGE 33

TUBE WORKING TOOLS

14PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


1.4 TUBE CUTTERS

MINI CUTTERS

For use in extremely tight places, these tube cutters require minimal swing around the tubing.

The REED MC1 features the smallest cutting radius in the industry and finer thread on screw for easier tightening.

The heavy duty MC2 is the strongest mini cutter available. Larger, deeply knurled knob allows easier tightening. MC3 has an even larger capacity

SWIFT SLICE

Swift Slice is the fastest way to cut copper tubing. No adjusting of cutter wheel is necessary, simply twist a few times and your cut is complete. The integrated self adjust mechanism makes cutting so easy you only need one hand to do it. How swift is that?

MC1, MC2, MC3

SWIFT SLICE

PRODUCT CODE DESCRIPTION CUTTER WHEELMC1 MINI CUTTER 1/8”- 5/8” (4mm-15mm) REED 32633MC2 MINI CUTTER 1/8”- 15/16” (3mm-24mm) REED 345T *MC3 MINI CUTTER 1/8”- 1 1/8” (3mm-28mm) REED 0 *

127 MINI CUTTER 1/8”- 5/8” (4mm-15mm) 3263321009 MINI CUTTER 1/8”- 1” (3mm-25mm) 345T *

174 MINI CUTTER 3/8”- 1 1/8”(10mm-28mm) 75015*KPS12 SWIFT SLICE 1/2” KPSWKPS34 SWIFT SLICE 3/4” KPSWKPSW SPARE WHEEL TO SUIT KPS12 & KPS34

* WHEELS ALSO AVAILABLE TO CUT STAINLESS STEEL – SEE CHART ON PAGE 33

TUBE WORKING TOOLS

14PLUMBOSS

AUSTRALIA

15

TUBE

WOR

KING

TOOL

SSE

RVIN

G AU

STRA

LIA’S

TRA

DESM

EN S

INCE

198

6

1.4 TUBE CUTTERSCONT

STANDARD TUBE CUTTERS

TC100: ⅛” - 1 ⅛” O.D Tubing TC312: ¼” - 1 ⅝” O.D Tubing

For hard or soft copper, aluminium, brass, thin �

wall steel, titanium and other metal tubing Makes clean right angle cuts with �

no burrs or chips to clog tubing Both cutters include: rollers with flare cut-off�

groove, fold away reamer and spare cutting wheel

TC105: ⅛” - 1 ¼” O.D. TubingFor copper, brass, aluminium and thin-wall steel �

Features an enclosed feed screw to eliminate �

clogging and jamming, grooved rolls for close- to flarecuts, fold away reamer and spare cutter wheel in handleMade from high strength aluminium�

200-30C: ⅛”- 1 ⅛” O.D Tubing 200- 45: 9/16”- 1 ¾” O.D Tubing

For copper, brass, aluminium or thin-wall steel. �

200-30C has a fold-away steel deburrer �

and spare cutter wheel in handle.

TC14: ⅛”- 1 ⅜” O.D Tubing For copper, brass, aluminium and thin wall steel �

Easy action, enclosed feed screw, grooved �

rollers, spare cutting wheel and pencil reamer.

RX425128: 4mm – 28mm O.D TubingRX425130: 4 ½mm – 32mm O.D TubingRX425142: 6mm – 42mm O.D TubingRX425167: 6mm – 70mm O.D Tubing

High performance bearings are used in both the �

roller and blade, so the cutter turns easily with only slight force even with the cutting load appliedEquipped with rubber protectors to �

prolong life of tool and prevent users’ hands from slipping whilst cuttingFor copper�

Stainless steel wheel available�

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



RX424228: 4mm – 28mm O.D Stainless Steel TubingRX425630: 4 ½mm – 32mm O.D Stainless Steel Tubing RX425642: 6mm – 42mm O.D Stainless Steel TubingRX425667: 6mm – 70mm O.D Stainless Steel Tubing

High Performance Bearings are used in both the �


prolong life of tool and prevent users hands from slipping whilst cuttingFor thin wall stainless steel tube�

Wheel for copper available�

* WHEELS ALSO AVAILABLE TO CUT STAINLESS STEEL –SEE CHART ON PAGE 33

PRODUCTCODE

DESCRIPTION CUTTERWHEEL

TC100 TUBE CUTTER 1/8”- 1 1/8” (4mm - 28mm) SILVA 75015*TC312 TUBE CUTTER 1/4”- 1 5/8” (7mm - 41mm) SILVA 75015* TC105 TUBE CUTTER 1/8”- 1 1/4” (4mm - 32mm) SILVA 70R03

200-30C TUBE CUTTER 1/8”- 1 1/8” (3mm - 30mm) 70R03200-45 TUBE CUTTER 9/16”- 1 3/4” (15mm - 45mm) 70R03TC14 TUBE CUTTER 1/8”- 1 3/8” (6mm - 35mm) REED 73505*

RX425128 REX ROLLER BEARING TUBE CUTTER 4mm – 28mm REX RX424231RX425130 REX ROLLER BEARING TUBE CUTTER 4 ½mm – 32mm REX RX424232RX425142 REX ROLLER BEARING TUBE CUTTER 6mm – 42mm REX RX424232RX425167 REX ROLLER BEARING TUBE CUTTER 6mm – 70mm REX RX424234RX425228 REX ROLLER BEARING TUBE CUTTER 4mm – 28mm S/STEEL REX RX424240RX425630 REX ROLLER BEARING TUBE CUTER 4 ½mm – 32mm S/STEEL REX RX424284RX425642 REX ROLLER BEARING TUBE CUTTER 6mm – 42mm S/STEELREX RX424284RX425667 REX ROLLER BEARING TUBE CUTTER 6mm – 70mm S/STEEL REX RX424286

TUBE WORKING TOOLS

16PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



RX424228: 4mm – 28mm O.D Stainless Steel TubingRX425630: 4 ½mm – 32mm O.D Stainless Steel Tubing RX425642: 6mm – 42mm O.D Stainless Steel TubingRX425667: 6mm – 70mm O.D Stainless Steel Tubing

High Performance Bearings are used in both the �


prolong life of tool and prevent users hands from slipping whilst cuttingFor thin wall stainless steel tube�

Wheel for copper available�

* WHEELS ALSO AVAILABLE TO CUT STAINLESS STEEL –SEE CHART ON PAGE 33

PRODUCTCODE

DESCRIPTION CUTTERWHEEL

TC100 TUBE CUTTER 1/8”- 1 1/8” (4mm - 28mm) SILVA 75015*TC312 TUBE CUTTER 1/4”- 1 5/8” (7mm - 41mm) SILVA 75015* TC105 TUBE CUTTER 1/8”- 1 1/4” (4mm - 32mm) SILVA 70R03

200-30C TUBE CUTTER 1/8”- 1 1/8” (3mm - 30mm) 70R03200-45 TUBE CUTTER 9/16”- 1 3/4” (15mm - 45mm) 70R03TC14 TUBE CUTTER 1/8”- 1 3/8” (6mm - 35mm) REED 73505*

RX425128 REX ROLLER BEARING TUBE CUTTER 4mm – 28mm REX RX424231RX425130 REX ROLLER BEARING TUBE CUTTER 4 ½mm – 32mm REX RX424232RX425142 REX ROLLER BEARING TUBE CUTTER 6mm – 42mm REX RX424232RX425167 REX ROLLER BEARING TUBE CUTTER 6mm – 70mm REX RX424234RX425228 REX ROLLER BEARING TUBE CUTTER 4mm – 28mm S/STEEL REX RX424240RX425630 REX ROLLER BEARING TUBE CUTER 4 ½mm – 32mm S/STEEL REX RX424284RX425642 REX ROLLER BEARING TUBE CUTTER 6mm – 42mm S/STEELREX RX424284RX425667 REX ROLLER BEARING TUBE CUTTER 6mm – 70mm S/STEEL REX RX424286

TUBE WORKING TOOLS

16PLUMBOSS

AUSTRALIA

17

TUBE

WOR

KING

TOOL

SPL

UMBO

SS -

AUST

RALI

A’SOW

NPL

UMBI

NGTO

OLSP

ECIA

LIST

S


PRODUCT CODE DESCRIPTION CUTTER WHEEL3790 RATCH-CUT TUBE CUTTER 5/16”- 1 1/8” 8041

4990 CLOSE QUARTER CUTTER 1/4”- 2 3/8” 8038

RATCH-CUT TUBE CUTTERS

3790 5/16 - 1 ⅛” (8mm - 28mm) Uniquely designed for fast, accurate tube cutting, �

especially in confined, nearly inaccessible locations. Works like a mini cutter with �

a long ratcheting handle for ease of use.Use it for quick, precise cutting of mild or �

stainless steel, copper and thin wall PVC.

4990 CLOSE QUARTER CUTTER ¼” - 2 ⅜” (6mm - 59mm)

Designed for plumbing remodelling, commercial �

boiler and air conditioning jobs: where standard cutters simply don’t have the room. 4990 cuts thin-wall material like traps and tailpieces with no distortion. Good for under vanities, close

to walls, waste and overflows. Eliminates sawingwhich can loosen joints. One cutter wheel cuts both plastic and non-ferrous materials. Built-in side rule adds measuring ease to cutting convenience.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1.5 NIPPLE CUTTER

QUICK RELEASE TUBE CUTTERS

The Quick Release™ tubing cutters are a REED invention and still remain the industry standard! REED uses a ball detent wheel pin. Competition uses a grooved pin and clip which is easily lost and makes wheel change extremely difficult. No other cutter on the market tracks or cuts as well!

Trim-a-Thread Nipple Cutter is a drill attachment used for trimming back excess 1/2” brass all-thread combinations. The tool is designed to shave the excess thread to desired length. The blade also chamfers the inside and outside of all-thread for ease of assembly of the spout.

For spare wheels refer to table on page 33. These Style cutters are also available to cut plastics, refer to page 2 of Pipe Working Tools.

PRODUCT CODE DESCRIPTION CUTTER WHEELTC1Q TUBE CUTTER 1/8”- 1 5/16” (3mm-33mm) REED 0TC2Q TUBE CUTTER 1/4”- 2 5/8” (6mm-63mm) REED 0TC3Q TUBE CUTTER 3/8”- 3 1/2” (10mm-90mm) REED 30 - 40

TC4Q TUBE CUTTER 1 7/8”- 4 1/2”(48mm-114mm) REED 30 - 40TC6Q TUBE CUTTER 4”- 6 5/8” (102mm-165mm)REED 30 - 40TC8Q TUBE CUTTER 6 1/4”- 10” (159mm-254mm) REED 30 - 40206FB TUBE CUTTER 3/8 - 2 5/8” (10mm - 63mm) IMPERIAL 74761

PRODUCT CODE DESCRIPTIONTTNC01 TRIM-A-THREAD NIPPLE CUTTER

TTNC01B TRIM-A-THREAD NIPPLE CUTTER BLADE

TUBE WORKING TOOLS

18PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1.5 NIPPLE CUTTER

QUICK RELEASE TUBE CUTTERS

The Quick Release™ tubing cutters are a REED invention and still remain the industry standard! REED uses a ball detent wheel pin. Competition uses a grooved pin and clip which is easily lost and makes wheel change extremely difficult. No other cutter on the market tracks or cuts as well!

Trim-a-Thread Nipple Cutter is a drill attachment used for trimming back excess 1/2” brass all-thread combinations. The tool is designed to shave the excess thread to desired length. The blade also chamfers the inside and outside of all-thread for ease of assembly of the spout.


PRODUCT CODE DESCRIPTION CUTTER WHEELTC1Q TUBE CUTTER 1/8”- 1 5/16” (3mm-33mm) REED 0TC2Q TUBE CUTTER 1/4”- 2 5/8” (6mm-63mm) REED 0TC3Q TUBE CUTTER 3/8”- 3 1/2” (10mm-90mm) REED 30 - 40

TC4Q TUBE CUTTER 1 7/8”- 4 1/2”(48mm-114mm) REED 30 - 40TC6Q TUBE CUTTER 4”- 6 5/8” (102mm-165mm)REED 30 - 40TC8Q TUBE CUTTER 6 1/4”- 10” (159mm-254mm) REED 30 - 40206FB TUBE CUTTER 3/8 - 2 5/8” (10mm - 63mm) IMPERIAL 74761

PRODUCT CODE DESCRIPTIONTTNC01 TRIM-A-THREAD NIPPLE CUTTER

TTNC01B TRIM-A-THREAD NIPPLE CUTTER BLADE

TUBE WORKING TOOLS

18PLUMBOSS

AUSTRALIA

19

TUBE

WOR

KING

TOOL

S


1.6 DEBURRING TOOLS

RECCR - Inner/Outer Cone Reamer and Deburring Tool.

For copper, aluminium and brass tubing�

Reams both inside and outside edges of tube �

with three hollow ground tool steel cutters. Fits comfortably in hand. �

DEB3 - Deburrs aluminium, copper and steel.

Three spare blades in handle. �

PRODUCT CODE DESCRIPTIONRECCR CONE REAMER INNER/OUTER DEBO DEBURRING TOOL W/-POCKET CLIP REED DEB3 DEBURRING TOOL REED

DEB0 - For internal burrs in copper tubing

Features long- lasting high speed blade, �

aluminium handle and pocket clip. For copper, aluminium and brass tubing.�

AUST

RALI

A’S T

RUST

ED P

LUMB

ING

TOOL

BRA

ND

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Please note Kingco Nut must be fitted before commencing crox on tube

1.7 CROX TOOLS

1.8 TUBE EXPANDERS

For use on 15mm and 20mm annealed copper tube. Use this tool to form a retaining ring on the end of 15mm and 20mm annealed copper tube when using a Kingco Nut (Ring) and rubber grommet.

Debur and anneal end of tube to be croxed �

Fit Kingco Nut over end of tube to be croxed�

Insert crox tool into tube until protective �

sleeve retracts into crox tool body Tighten head until balls engage wall of �

tube. Continue tightening and turn tool while crox forming on wall of tube Crox complete when T handle �

will not turn down further Turn T handle back and remove �

tool from end of tube Fit rubber grommet before final�

fitting and tightening of nut

PRODUCT CODE DESCRIPTIONP217 CROX TOOL ½”

P217A CROX TOOL ¾”

PRODUCT CODE DESCRIPTIONSE1 SUPER EXPANDER 3/8” - 1”

SUPER EXPANDER

6 tube sizes - ⅜”, ½”, ⅝”, ¾”, ⅞” and 1” are always�

ready for use without exchange of parts3 stage ratchet ensures ease of use �

without the need of long handlesGross weight only 1/3 of �

conventional tool (about 0.5kg)

TUBE WORKING TOOLS

20PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Please note Kingco Nut must be fitted before commencing crox on tube

1.7 CROX TOOLS

1.8 TUBE EXPANDERS

For use on 15mm and 20mm annealed copper tube. Use this tool to form a retaining ring on the end of 15mm and 20mm annealed copper tube when using a Kingco Nut (Ring) and rubber grommet.

Debur and anneal end of tube to be croxed �

Fit Kingco Nut over end of tube to be croxed�

Insert crox tool into tube until protective �

sleeve retracts into crox tool body Tighten head until balls engage wall of �

tube. Continue tightening and turn tool while crox forming on wall of tube Crox complete when T handle �

will not turn down further Turn T handle back and remove �

tool from end of tube Fit rubber grommet before final�

fitting and tightening of nut

PRODUCT CODE DESCRIPTIONP217 CROX TOOL ½”

P217A CROX TOOL ¾”

PRODUCT CODE DESCRIPTIONSE1 SUPER EXPANDER 3/8” - 1”

SUPER EXPANDER

6 tube sizes - ⅜”, ½”, ⅝”, ¾”, ⅞” and 1” are always�

ready for use without exchange of parts3 stage ratchet ensures ease of use �

without the need of long handlesGross weight only 1/3 of �

conventional tool (about 0.5kg)

TUBE WORKING TOOLS

20PLUMBOSS

AUSTRALIA

21

TUBE

WOR

KING

TOOL

STH

E TU

BE &

PIP

E TO

OL S

PECI

ALIS

TS

1.8 TUBE EXPANDERSCONT

PRODUCT CODE DESCRIPTIONHE1 HAMMER EXPANDER 3/8”,1/2”,5/8”,3/4”,7/8”,1” HE2 HAMMER EXPANDER 1 1/4”, 1 1/2”, 2” HE4 HAMMER EXPANDER 2”, 2 1/2”, 3”, 4”

PRODUCT CODE DESCRIPTIONAREXP AR MULTI SIZED EXPANDER 1 ¼” - 4”

AREXPR AR MULTI SIZED EXPANDER 1 ⅛” – 4 ⅛”

HAMMER EXPANDER

Easy to use - simply insert in annealed tube and hit with a hammer until expander segments proceed up shaft to the end

AR MULIT-SIZE EXPANDER

1 ¼”, 1 ½”, 2”, 2 ½”, 3” and 4” capacity for�

soft copper, aluminium and thin wall tubing Also available with refrigeration �

sizes: 1 ⅛”, 1 ⅝”, 2 ⅛”, 2 ⅝, 3 ⅛” and 4 ⅛”.Six sizes in one unit �

Eliminates the need to stock/use expensive fittings �

Has a trapezoid thread for easier use and �

has an inner bronze socket for longer life Has bevelled edges for easier insertion�

One soldering joint, creating reduction in �

soldering costs especially on large tube sizes Unique two handle design� makes it easy to handle even under adverse conditions Australian designed and manufactured �

Adaptor available to expand 6”and 8” �

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



PRODUCT CODE DESCRIPTIONPBEXP PLUMBOSS EXPANDER SET ½”, ¾” & 1”

PBEXPR PLUMBOSS EXPANDER SET ⅜”, ⅝”, ⅞” (refrigeration)

PBEXPH 3/8 PLUMBOSS EXPANDER HEAD ⅜”

PBEXPH 1/2 PLUMBOSS EXPANDER HEAD ½”

PBEXPH 5/8 PLUMBOSS EXPANDER HEAD ⅝”

PBEXPH 3/4 PLUMBOSS EXPANDER HEAD ¾”

PBEXPH 7/8 PLUMBOSS EXPANDER HEAD ⅞”

PBEXPH 1 PLUMBOSS EXPANDER HEAD 1”

PBEXPH 1 1/8 PLUMBOSS EXPANDER HEAD 1 ⅛”

PBEXPH 1 1/4 PLUMBOSS EXPANDER HEAD 1 ¼”

PBEXPH 1 1/2 PLUMBOSS EXPANDER HEAD 1 ½”

plumBOSS EXPANDERS

Plier type expanders that expand �

½”, ¾” and 1” tubing.Additional heads can be added �

to expand up to 1 ½” tubing.Also available in ⅛ increments for refrigeration sizes�

Heads made of stainless steel, not plated mild steel.�

Australian designed and manufactured. �

More cost effective than imports.

TUBE WORKING TOOLS

22PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



PRODUCT CODE DESCRIPTIONPBEXP PLUMBOSS EXPANDER SET ½”, ¾” & 1”

PBEXPR PLUMBOSS EXPANDER SET ⅜”, ⅝”, ⅞” (refrigeration)

PBEXPH 3/8 PLUMBOSS EXPANDER HEAD ⅜”

PBEXPH 1/2 PLUMBOSS EXPANDER HEAD ½”

PBEXPH 5/8 PLUMBOSS EXPANDER HEAD ⅝”

PBEXPH 3/4 PLUMBOSS EXPANDER HEAD ¾”

PBEXPH 7/8 PLUMBOSS EXPANDER HEAD ⅞”

PBEXPH 1 PLUMBOSS EXPANDER HEAD 1”

PBEXPH 1 1/8 PLUMBOSS EXPANDER HEAD 1 ⅛”

PBEXPH 1 1/4 PLUMBOSS EXPANDER HEAD 1 ¼”

PBEXPH 1 1/2 PLUMBOSS EXPANDER HEAD 1 ½”

plumBOSS EXPANDERS

Plier type expanders that expand �

½”, ¾” and 1” tubing.Additional heads can be added �

to expand up to 1 ½” tubing.Also available in ⅛ increments for refrigeration sizes�

Heads made of stainless steel, not plated mild steel.�

Australian designed and manufactured. �

More cost effective than imports.

TUBE WORKING TOOLS

22PLUMBOSS

AUSTRALIA

23

TUBE

WOR

KING

TOOL

SIM

PORT

ERS

& MA

NUFA

CTUR

ERS

OF P

LUMB

ING

EQUI

PMEN

T


1.9 FLARING TOOLS

PRODUCT CODE DESCRIPTIONCE2 COLLET EXPANDER 1 ½” & 2”

CE2½ COLLET EXPANDER 2 ½”

CE4 COLLET EXPANDER 3” & 4”



CE10 COLLET EXPANDER 10” ONLY

PRODUCT CODE DESCRIPTIONS458 FLARING TOOL 1/4”- 3/4” 45°

COLLET EXPANDERS

Compact and easy to use - simply �

insert in annealed tube and turn nut until desired socket size is formed Multiple sizes on most expanders �

45° FLARING TOOL - ECCENTRIC CONE TYPE

S458 is designed for soft copper and aluminium �

Flares 1/4”, 5/16”, 3/8”, 1/2”, 5/8” & 3/4”�

Produces smooth flares with little effort.�

The large feed screw handle easily turns the eccentrically mounted, bearing supported

flaring head, giving the tube a uniform flare. A built in clutch mechanism stops flaring at the

proper time, preventing damage to the tubing and allowing burnishing for a smooth, even flare.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


1.9 FLARING TOOLSCONT

45° FLARING TOOLS

Rugged forged steel slip-on yoke and hardened flaring bar. Positive clamping action of bars prevents tube slippage. Self-centering yoke with swivel-type, hardened steel chrome-finished flaring cones form better flares with less effort. Design of yoke permits flaring where there is little space between nut and tube end.

S195 - for 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” & 5/8” O.D tubing

S375 - for 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” & 3/4” O.D tubing

S103 - for 3/4”, 7/8” & 1” O.D tubing

45° FLARING & SWAGING TOOL

The S275 flares 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” & 3/4” O.D tubing. Includes swaging adaptors for 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” 0.D. Converts quickly. Screw-type feed. Ideal for use in close quarters. The two bars included cover 9 different sizes. Swivel-type swaging adaptor and flaring cone are hardened steel chrome-finished for easy operation. Self-centering slip-on forged steel yoke in tool case.

PRODUCT CODE DESCRIPTIONS195 FLARING TOOL 3/16”- 5/8” 45°SILVA

S375 FLARING TOOL 1/8”- 3/4” 45° SILVA

S103 FLARING TOOL 3/4”- 1” 45° SILVA

PRODUCT CODE DESCRIPTIONS275 FLARING & SWAGING TOOL 1/8”- 3/4” SILVA

TUBE WORKING TOOLS

24PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



45° FLARING TOOLS

Rugged forged steel slip-on yoke and hardened flaring bar. Positive clamping action of bars prevents tube slippage. Self-centering yoke with swivel-type, hardened steel chrome-finished flaring cones form better flares with less effort. Design of yoke permits flaring where there is little space between nut and tube end.

S195 - for 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” & 5/8” O.D tubing

S375 - for 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” & 3/4” O.D tubing

S103 - for 3/4”, 7/8” & 1” O.D tubing

45° FLARING & SWAGING TOOL

The S275 flares 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” & 3/4” O.D tubing. Includes swaging adaptors for 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” 0.D. Converts quickly. Screw-type feed. Ideal for use in close quarters. The two bars included cover 9 different sizes. Swivel-type swaging adaptor and flaring cone are hardened steel chrome-finished for easy operation. Self-centering slip-on forged steel yoke in tool case.

PRODUCT CODE DESCRIPTIONS195 FLARING TOOL 3/16”- 5/8” 45°SILVA

S375 FLARING TOOL 1/8”- 3/4” 45° SILVA

S103 FLARING TOOL 3/4”- 1” 45° SILVA

PRODUCT CODE DESCRIPTIONS275 FLARING & SWAGING TOOL 1/8”- 3/4” SILVA

TUBE WORKING TOOLS

24PLUMBOSS

AUSTRALIA

25

TUBE

WOR

KING

TOOL

SPL

UMBO

SSSU

PPLY

PLU

MBIN

G,IN

DUST

RIAL

,ELE

CTRI

CAL &

REF

RIGE

RATI

ONTO

OLS


45° DOUBLE FLARING TOOLS

S93 - for 3/16”, 1/4”, 5/16”, 3/8” and 1/2” O.D tubing. Recommended for Bundy and other annealed soft tubing. Also makes single or double flares in soft copper or aluminium tubing. Small, light-weight, easy to handle. Forged steel yoke, swivel-type hardened steel chrome finished flaring cone. Bar provides positive grip of tubing. Includes tool case.

BLOCK & PIN FLARING TOOLS

Block and Pin Flaring Tools are the most economical way to flare tube. To flare, insert tube in block and tighten wing nuts. Then insert pin in the tube and hit with a hammer until flare is formed.

PRODUCT CODE DESCRIPTIONS93 DOUBLE FLARING TOOL 3/16”- 1/2” SILVA

PRODUCT CODE DESCRIPTIONP209-10 BLOCK AND PIN FLARING TOOL 1/2”,3/4”,1”

P211-12 BLOCK AND PIN FLARING 1 1/4”

P213-14 BLOCK AND PIN FLARING TOOL 1 1/2”

P215-16 BLOCK AND PIN FLARING TOOL 2”

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



QUICK FLARE

Quick flare is a fast economical way of flaring ½” and ¾” copper tube. Tube is inserted into tool and clamped by squeezing handles together; flare pins are then hit with a hammer until desired flare is formed.

CORDLESS FLARING TOOL

This compact, light weight unit is as genius as it is powerful. It comes with three different sized single action clamps that position the copper tube using a stopper which eliminates unevenness in the flaring of the copper tube. The eccentric cone moves forward with a rotary motion, to gradually push and expand the inner diameter of copper tube. The forward movement of the cone is then stopped by the clutch, which activates at a predetermined pressure. The flared surface of the copper tube is given a clean finish by the cone’s rotary motion.

THIS UNIT COMES COMPLETE WITH:RB Tube CutterRF20N Power Unit¼” Clamp⅜” Clamp½” ClampScraperBattery and Recharger

PRODUCT CODE DESCRIPTIONP218 QUICK FLARE 1/2” & 3/4”

PRODUCT CODE DESCRIPTIONRX424930 220V CORDLESS FLARE RF20N

RX424950 CLAMP WITHOUT LINER FOR RF20N

RX424850 SPARE ¼” LINER (6.35mm)

RX424852 SPARE ⅜” LINER (9.52mm)

RX424853 SPARE ½” LINER (12.70mm)

RX424854 ⅝” LINER (15.88mm)

RX424855 ¾” LINER (19.05mm)

TUBE WORKING TOOLS

26PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



QUICK FLARE

Quick flare is a fast economical way of flaring ½” and ¾” copper tube. Tube is inserted into tool and clamped by squeezing handles together; flare pins are then hit with a hammer until desired flare is formed.

CORDLESS FLARING TOOL

This compact, light weight unit is as genius as it is powerful. It comes with three different sized single action clamps that position the copper tube using a stopper which eliminates unevenness in the flaring of the copper tube. The eccentric cone moves forward with a rotary motion, to gradually push and expand the inner diameter of copper tube. The forward movement of the cone is then stopped by the clutch, which activates at a predetermined pressure. The flared surface of the copper tube is given a clean finish by the cone’s rotary motion.

THIS UNIT COMES COMPLETE WITH:RB Tube CutterRF20N Power Unit¼” Clamp⅜” Clamp½” ClampScraperBattery and Recharger

PRODUCT CODE DESCRIPTIONP218 QUICK FLARE 1/2” & 3/4”

PRODUCT CODE DESCRIPTIONRX424930 220V CORDLESS FLARE RF20N

RX424950 CLAMP WITHOUT LINER FOR RF20N

RX424850 SPARE ¼” LINER (6.35mm)

RX424852 SPARE ⅜” LINER (9.52mm)

RX424853 SPARE ½” LINER (12.70mm)

RX424854 ⅝” LINER (15.88mm)

RX424855 ¾” LINER (19.05mm)

TUBE WORKING TOOLS

26PLUMBOSS

AUSTRALIA

27

TUBE

WOR

KING

TOOL

SSE

RVIN

G AU

STRA

LIA’S

TRA

DESM

EN S

INCE

198

6

1.10 COPPER SHUT-OFF TOOLS

These tools are designed specifically to shut off and reshape 3/4” through 2” copper tubing. The tool swings open to go around the pipe. All parts are corrosion-protected for long service life. Grease fittings on shut off tools provide long life and easy operation.

PRODUCT CODE DESCRIPTIONCS01 COPPER SHUT-OFF TOOL ¾”- 1” REED

CS02 COPPER SHUT-OFF TOOL 1 ¼” - 2” REED

1.11 TESTING EQUIPMENT

CIVIL CONTRACTING AIR TEST KIT

The Civil Contractors Air Test Kit is the perfect tool for getting ahead of the competition. It deletes the need for down time on site and the need for large amounts of purchased water.

SAFER: Regulated to 5psi to prevent the risk of drain plugs becoming deadly projectiles.

PROFESSIONAL: The Air Test Rig will simplify the process taken to ensure the pipes are ready to be passed by inspection. By using the Air Test Rig you are deleting the need of water. This will save both money and time ensuring that while other contractors are wasting time and money waiting for water trucks, leak repairs, water trucks and the final inspection, you have completed another professional job.

ENVIRONMENT FRIENDLY: By using air rather than water you are saving Australia’s most precious resource.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


TEST BUCKETS

STAINLESS STEEL HAND TEST PUMP

The SSTP50 Test Pump features 60bar (900psi) pressure gauge. The 12L water bucket is made of stainless steel and has a 1.5m hose attached. This unit has a maximum pressure of 6000kpa.

Repair Kit (SSTPR) consists of: 1xlarge O-ring, 2xsmall O-ring, 1xsmall Stainless Steel Ball and 1xSpring

PLUMBOSS AIR TEST KIT

SAVES TIME AND WATER! SIMPLE AND EASY TO USE!

The ready to use air test kit comprises of the following:19” ToolboxHigh Volume Dual Action Pump2x Test Plugs (4” or 6”)2m of quality hoseGauge with Valve

ELECTRIC TEST BUCKET

Electric Test Buckets eliminate the need for extended periods of hard pumping for large pipe work systems. Our Hydrostatic Test Pump is the perfect plumbers mate. It now pumps 8.3L/min, which is 1.5L/min more than the last pump. The new design of our Hydrostatic Test Pump is more plumber friendly as it is a small compact unit which means it will not take up valuable space in the shed or the ute.

TUBE WORKING TOOLS

28

1.11 TESTING EQUIPMENTCONT

PRODUCT CODE DESCRIPTION DISCOUNT QTY.ATR03 CIVIL CONTRACTORS AIR TEST RIG N/A

SSTP50 STAINLESS STEEL HAND TEST PUMP N/ASSTPR REPAIR KIT FOR SSTP50 N/A

HTP8.3COMBO HTP 8.3 + HTKIT COMBINATION N/AHTP8.3 AR COMPACT 1900 PSI 8.3 L/MIN 240V ELECTRIC PUMP N/A

HTKIT HYDROSTATIC TESTING RIG (SUIT HTP8.3) N/APBATK PLUMBOSS 4” AIR TEST KIT (100mm) 5

PBATK/6 PLUMBOSS 6” AIR TEST KIT (150mm) 5PUMP REPLACEMENT PUMP FOR PBATK N/A

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


TEST BUCKETS

STAINLESS STEEL HAND TEST PUMP

The SSTP50 Test Pump features 60bar (900psi) pressure gauge. The 12L water bucket is made of stainless steel and has a 1.5m hose attached. This unit has a maximum pressure of 6000kpa.

Repair Kit (SSTPR) consists of: 1xlarge O-ring, 2xsmall O-ring, 1xsmall Stainless Steel Ball and 1xSpring

PLUMBOSS AIR TEST KIT

SAVES TIME AND WATER! SIMPLE AND EASY TO USE!

The ready to use air test kit comprises of the following:19” ToolboxHigh Volume Dual Action Pump2x Test Plugs (4” or 6”)2m of quality hoseGauge with Valve

ELECTRIC TEST BUCKET

Electric Test Buckets eliminate the need for extended periods of hard pumping for large pipe work systems. Our Hydrostatic Test Pump is the perfect plumbers mate. It now pumps 8.3L/min, which is 1.5L/min more than the last pump. The new design of our Hydrostatic Test Pump is more plumber friendly as it is a small compact unit which means it will not take up valuable space in the shed or the ute.

TUBE WORKING TOOLS

28


PRODUCT CODE DESCRIPTION DISCOUNT QTY.ATR03 CIVIL CONTRACTORS AIR TEST RIG N/A

SSTP50 STAINLESS STEEL HAND TEST PUMP N/ASSTPR REPAIR KIT FOR SSTP50 N/A

HTP8.3COMBO HTP 8.3 + HTKIT COMBINATION N/AHTP8.3 AR COMPACT 1900 PSI 8.3 L/MIN 240V ELECTRIC PUMP N/A

HTKIT HYDROSTATIC TESTING RIG (SUIT HTP8.3) N/APBATK PLUMBOSS 4” AIR TEST KIT (100mm) 5

PBATK/6 PLUMBOSS 6” AIR TEST KIT (150mm) 5PUMP REPLACEMENT PUMP FOR PBATK N/A

PLUMBOSSAUSTRALIA

29

TUBE

WOR

KING

TOOL

SPL

UMBO

SS -

AUST

RALI

A’S O

WN

PLUM

BING

TOO

L SPE

CIAL

ISTS


RUFIN TEST KITTHE TEST BUCKET SAVERUsed when testing the rough-in on a house, the copper work is pumped up to pressure using a test bucket and the Rufin Test Kit. The mini ball valve is turned off to hold the pressure for the time specified by the inspector, and the test bucket can be taken away so that:a) It is not stolen b) test bucket can be used on another job c) bucket can be used on multiple unit tests

STACK TEST KITTHE TIME AND MONEY SAVERThe stack test kit is the perfect partner for the Plumboss Air Test Kit. The ‘Stack Test Kit’ is great when you are air testing a block of units or flats. The ‘Stack Test Kit’ is used in the exact same manner as the ‘Rufin Test Kit’, when you have reached your desired pressure simply turn the mini ball valve and move on to the next test. This process means that:a) Save valuable time, your time.b) Air Test Kit can be used on multiple unit tests.c) Air Test Kit can be used on multiple jobs.

PRODUCT CODE DESCRIPTION DISCOUNT QTY.RTK02 RUFIN TEST KIT 5

RTK02LF RUFIN TEST KIT w/ LIQUID FILL GAUGE 5ATK02 STACK TEST KIT N/A

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



HOSE TEST KIT

2500kpa Water Pressure Gauge with 300mm of hose and fittings to connect to standard taps (3/4” BSP). These units are useful when explaining to customers that they have a volume problem not a pressure problem. It is also required for checking pressure when installing pressure sensitive fittings. Different pressures and thread sizes are available made to order.

Note: NSW REQUIRES A 1” RING AND TAIL. ALL OTHER STATES REQUIRE 3/4” RING AND TAILS

GAUGES

Spare gauges to suit Hose �

Test Kit and Rufin Test KitLiquid filled gauges provide a greater�

resistance to damage caused by pulsating or rapidly changing pressures Other pressure gauges available �

PRODUCT CODE DESCRIPTION DISCOUNT QTY.HTK01 WATER PRESSURE GAUGE WITH HOSE 5

HTK01NSW WATER PRESSURE GAUGE WITH HOSE 5

PRODUCT CODE DESCRIPTIONGO2500 WATER PRESSURE GAUGE 2500kpa

GO2500LF LIQUID FILLED PRESSURE GAUGE 2500kpa GO100 WATER PRESSURE GAUGE 100kpa

GO100LF LIQUID FILLED PRESSURE GAUGE 100kpa

TUBE WORKING TOOLS

30PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



HOSE TEST KIT

2500kpa Water Pressure Gauge with 300mm of hose and fittings to connect to standard taps (3/4” BSP). These units are useful when explaining to customers that they have a volume problem not a pressure problem. It is also required for checking pressure when installing pressure sensitive fittings. Different pressures and thread sizes are available made to order.

Note: NSW REQUIRES A 1” RING AND TAIL. ALL OTHER STATES REQUIRE 3/4” RING AND TAILS

GAUGES

Spare gauges to suit Hose �

Test Kit and Rufin Test KitLiquid filled gauges provide a greater�

resistance to damage caused by pulsating or rapidly changing pressures Other pressure gauges available �

PRODUCT CODE DESCRIPTION DISCOUNT QTY.HTK01 WATER PRESSURE GAUGE WITH HOSE 5

HTK01NSW WATER PRESSURE GAUGE WITH HOSE 5

PRODUCT CODE DESCRIPTIONGO2500 WATER PRESSURE GAUGE 2500kpa

GO2500LF LIQUID FILLED PRESSURE GAUGE 2500kpa GO100 WATER PRESSURE GAUGE 100kpa

GO100LF LIQUID FILLED PRESSURE GAUGE 100kpa

TUBE WORKING TOOLS

30PLUMBOSS

AUSTRALIA

31

TUBE

WOR

KING

TOOL

SAU

STRA

LIA’S

TRU

STED

PLU

MBIN

G TO

OL S

PECI

ALIS

TS

WATER MANOMETERS

The Manometer is designed for easy gas leak detection in installation and service applications. There are two ports on a Manometer.

One hose is connected to the input side (supply of gas) of an appliance (or an installation) and the other hose is connected to another point (downstream) in the system. If there is a leak in the system that you are testing, you will notice a difference between the two columns to the size of the gas leak. i.e. - a small difference between the two columns represents a small gas leak, a large difference means there is a large gas leak.

Our Manometers are built to a high standard, and are constructed of practical heavy duty materials to give the user a reliable and long life precision instrument.

DIGITAL MANOMETER

The Plumboss Digital Manometer has a 0.3 second response time. It has a data hold, record, max/min functions, operating range 0-50˚C, auto power off and low battery indicator.8205 (0- 5psi) CONTAINS:1x meter unit, 1x 9.0 Volt Battery, 1x Operation manual, 1x Hard Carrying case and 2x 1m connection hoses. All 8205 Digital Manometers come with a one year warranty.

PRODUCT CODE DESCRIPTIONMAN12 WATER MANOMETER 12”MAN36 WATER MANOMETER 36”8205 DIGITAL MANOMETER


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



1.12 ELECTRONIC THERMOMETER

MANIFOLD GAUGE & HOSE

The deluxe 2-valve brass manifold features �

durable, high precision gauges which provides superior resistance to shock, vibration and pulsation for superior performance and extended gauge life.

Soft Seat Valves - Brass stems with long wearing �

soft tips seat tightly with finger tip pressure.

Polar Shield® High Performance Hose – Supplied �

with UL recognized premium refrigerant hose - 800psi working pressure, 4000psi burst pressure. (Applies only to models which include hoses)

Ergonomic Control Handles – Durable, colour �

coded hand wheels are non-slip, even with oily fingers

Swivel Hanger�

This Min/Max Thermometer has a range of - 40°C to +200°C. It operates with a precision of ±1˚C from - 20˚C to 100˚C and ±2˚C outside of this range. It has a resolution of 0.1°C/°F. The Thermometer incorporates an auto switch off function after 5mins.

Ideal for measuring water temperature �

Features min/max hold - thermometer �

will hold in memory both the minimum and maximum temperatures reached over the period of time the probe was immersed

Supplied with a probe cover �

Water resistant �

Only needs a 1.5V button cell battery�

PRODUCT CODE DESCRIPTION496CKP MANIFOLD GAUGE AND HOSE513 – C REFRIGERATION VACUUM MANIFOLD GAUGES FOR 410 GAS

PRODUCT CODE DESCRIPTION4099667 DIGITAL MIN/MAX THERMOMETER

TUBE WORKING TOOLS

32PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



1.12 ELECTRONIC THERMOMETER

MANIFOLD GAUGE & HOSE

The deluxe 2-valve brass manifold features �

durable, high precision gauges which provides superior resistance to shock, vibration and pulsation for superior performance and extended gauge life.

Soft Seat Valves - Brass stems with long wearing �

soft tips seat tightly with finger tip pressure.

Polar Shield® High Performance Hose – Supplied �

with UL recognized premium refrigerant hose - 800psi working pressure, 4000psi burst pressure. (Applies only to models which include hoses)

Ergonomic Control Handles – Durable, colour �

coded hand wheels are non-slip, even with oily fingers

Swivel Hanger�

This Min/Max Thermometer has a range of - 40°C to +200°C. It operates with a precision of ±1˚C from - 20˚C to 100˚C and ±2˚C outside of this range. It has a resolution of 0.1°C/°F. The Thermometer incorporates an auto switch off function after 5mins.

Ideal for measuring water temperature �

Features min/max hold - thermometer �

will hold in memory both the minimum and maximum temperatures reached over the period of time the probe was immersed

Supplied with a probe cover �

Water resistant �

Only needs a 1.5V button cell battery�

PRODUCT CODE DESCRIPTION496CKP MANIFOLD GAUGE AND HOSE513 – C REFRIGERATION VACUUM MANIFOLD GAUGES FOR 410 GAS

PRODUCT CODE DESCRIPTION4099667 DIGITAL MIN/MAX THERMOMETER

TUBE WORKING TOOLS

32PLUMBOSS

AUSTRALIA

33

TUBE

WOR

KING

TOOL

STH

ETU

BE &

PIP

ETO

OLSP

ECIA

LIST

S

1.13 CUTTER WHEELS FOR PIPE CUTTERS

FOR TUBING CUTTERS - METAL

Cat. No. Std.Pack

Blade Exposure ReedCutter

Ridgid®Cutter

Ridgid®Wheel

Application

In mm

0 12 .180 4.6 TC1Q, T10 TC15, T15,

00, 0, 10, 15,20 F158

E1240

Copper, Aluminium, Brass, Steel Tubing

TC2Q, T20, MC3

OSS 12 .160 4.1 Stainless Steel

30 - 40 12 .250 6.4 TC3Q, TC4Q,TC5Q,TC6Q,TC8QP

30, 40, 106, 107 154, 156

E2191E2558

Copper, Aluminium, Brass, Steel Tubing

32633 12 .127 3.2 MC1 Copper, Aluminium, Brass

75015 12 .125 3.2 TC11 Copper, Aluminium, Brass

73505 12 170 4.3 TC14 Copper, Aluminium, Brass, Steel Tubing

75046 12 .125 3.2 TC11 Aluminium, Brass, Steel Tubing, Stainless Steel

73515 12 .170 4.3 TC14 Stainless Steel Only

345T 12 .146 3.7 MC2 101, 103 - 105, 131, 152

E3469 Copper, Aluminium, Brass

R4546 6 .161 4.1 MC2 132, 150-153, 205

E4546 Steel Tubing, Stainless Steel

R2558(formerly R2191)

12 .188 4.8 TC3Q, TC4Q,TC5Q,TC6Q,TC8QP

E2558 Muffler Systems Tubing

Cat. No. Std.Pack


Ridgid®Cutter

Ridgid®Wheel

Application

In mm

2RBS 12 .300 7.6 2-1, 2-1Q, 2-4WG,

2-3, 2-3Q, 2-4

1,2,42,535,300,50,

1A, 2A, 42A, 201,202

F514M-50

F3, F3S

Steel, Stainless Steel

2RBCI 4 .172 4.4 Cast Iron2RBHD 12 .296 7.5 HD for Steel, Stainless

SteelHS4 4 .383 9.7 3-1, 3-3, 3-4 Steel, Stainless Steel

HI4 4 .258 6.6 3-1, 3-3, 3-4 Cast Iron, Ductile

HX2½ 4 .383 9.7 H2½ 300, 535, 1822-1 mach

Extra Strong Steel Pipe

R1032/S 6 .450 11.4 360, 820, 364 cutter

E1032S,E1032

Steel, Stainless Steel, Schd. 80

R367 6 .480 12.2 6S, 208, 209 F367 Steel, Ductile

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Cat. No. Std.Pack


Ridgid®Cutter

Ridgid®Wheel

Applicationin mm

0P2 12 .275 7.0 TC1Q,TC2QT10,T15

TC15,T20

1520

ABS, PE, PB, PP

1-2PVC 12 .280 7.1 PVC

30-40P 12 .343 8.7 TC3Q, TC4QTC5Q,TC6Q

30P, 40P, 133P 134P 136P, 154P,

156P 106,109P

E2156

E5299,E2157

ABS. PE, PB, PP

3-6PVC 12 .377 9.6 3”-6” PVC&4’ Heavy Wall

6QP 4 .550 14.0 TC4Q, TC6Q,TC8QP

134P, 136P, 154P, 156P

Thick Wall PE

80P 4 .750 19.1 TC6Q, TC8QP

136P E2880 ABS. PE, PB, PP

R2155 6 .295 7.5 131P, 132P, 1205P

151P, 152P, 153P

E2155E5272

PE, PB, PP-Standard & Heavy Wall

R5272 6 .295 7.5 PVC, ABS – Standard Wall680PVC 4 .575 14.6 TC6Q,

TC8QP134P, 136P, 154P, 156P

E702 PVC – Standard and Heavy Wall

1.13 CUTTER WHEELSCONT FOR TUBING CUTTERS - PLASTIC

FOR HINGED CUTTERSCat. No. Std.

PackBlade Exposure Reed

CutterRidgid®Cutter

Ridgid®Wheel

Applicationin mm

HS4 4 .320 8.1 H4 Steel, Stainless Steel


HS8-12 4 .450 11.4 H8, H12 Steel, Stainless Steel

HX2½ 4 .383 9.7 H2½ Steel, Stainless Steel, Schd. 80

HX4 4 .383 9.7 H4 Steel, Stainless Steel, Schd. 80


HX8 4 .567 14.4 H8, H12 Steel, Stainless Steel, Schd. 80

HXX8 4 .660 16.8 H8, H12 Steel, Stainless Steel, Schd. 100

2RBCI 4 .172 4.4 H2½ Cast Iron, Ductile Iron

HI4 4 .258 6.6 H4 Cast Iron, Ductile Iron

HI6 4 .410 10.4 H6, H8, H12 Cast Iron, Ductile Iron

H6PSE5 4 .400 10.2 H6, H8, H12 Steel, Cast Iron, Ductile Iron

3RG 4 .399 10.1 44, 3S, 4S, 44S,

466, 468, 472, 1224

F229HD,F229S,

F515TB,E1962

Steel, Stainless Steel3RG-CI 4 .285 7.2 Cast Iron, Ductile Iron

TUBE WORKING TOOLS

34PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Cat. No. Std.Pack


Ridgid®Cutter

Ridgid®Wheel

Applicationin mm

0P2 12 .275 7.0 TC1Q,TC2QT10,T15

TC15,T20

1520

ABS, PE, PB, PP

1-2PVC 12 .280 7.1 PVC

30-40P 12 .343 8.7 TC3Q, TC4QTC5Q,TC6Q

30P, 40P, 133P 134P 136P, 154P,

156P 106,109P

E2156

E5299,E2157

ABS. PE, PB, PP

3-6PVC 12 .377 9.6 3”-6” PVC&4’ Heavy Wall

6QP 4 .550 14.0 TC4Q, TC6Q,TC8QP

134P, 136P, 154P, 156P

Thick Wall PE

80P 4 .750 19.1 TC6Q, TC8QP

136P E2880 ABS. PE, PB, PP

R2155 6 .295 7.5 131P, 132P, 1205P

151P, 152P, 153P

E2155E5272

PE, PB, PP-Standard & Heavy Wall

R5272 6 .295 7.5 PVC, ABS – Standard Wall680PVC 4 .575 14.6 TC6Q,

TC8QP134P, 136P, 154P, 156P

E702 PVC – Standard and Heavy Wall

1.13 CUTTER WHEELSCONT FOR TUBING CUTTERS - PLASTIC

FOR HINGED CUTTERSCat. No. Std.

PackBlade Exposure Reed

CutterRidgid®Cutter

Ridgid®Wheel

Applicationin mm



HS8-12 4 .450 11.4 H8, H12 Steel, Stainless Steel

HX2½ 4 .383 9.7 H2½ Steel, Stainless Steel, Schd. 80



HX8 4 .567 14.4 H8, H12 Steel, Stainless Steel, Schd. 80

HXX8 4 .660 16.8 H8, H12 Steel, Stainless Steel, Schd. 100

2RBCI 4 .172 4.4 H2½ Cast Iron, Ductile Iron

HI4 4 .258 6.6 H4 Cast Iron, Ductile Iron

HI6 4 .410 10.4 H6, H8, H12 Cast Iron, Ductile Iron

H6PSE5 4 .400 10.2 H6, H8, H12 Steel, Cast Iron, Ductile Iron

3RG 4 .399 10.1 44, 3S, 4S, 44S,

466, 468, 472, 1224

F229HD,F229S,

F515TB,E1962

Steel, Stainless Steel3RG-CI 4 .285 7.2 Cast Iron, Ductile Iron

TUBE WORKING TOOLS

34PLUMBOSS

AUSTRALIA

35

TUBE

WOR

KING

TOOL

SIM

PORT

ERS

& MA

NUFA

CTUR

ERS

OFPL

UMBI

NGEQ

UIPM

ENT

FOR ROTARY CUTTERS - METAL

REX CUTTER WHEELS

Cat. No. Std.Pack


Ridgid®Cutter

Ridgid®Wheel

Applicationin mm

RCS8-36 4 .635 16.1 ALL ROTARY CUTTER WHEELS FIT ALL SIZES OF ROTARY AND

LOW CLEARANCE ROTARY CUTTERS

Steel, Stainless SteelRCI8-30 4 .500 12.7 Cast Iron, Ductile Iron

(manual)RCDX 4 .531 13.5 Heavy Cast Iron, Ductile

Iron (power)RCX 4 .800 20.3 Heavy Wall Steel, Stain-

less Steel

WHY REED CUTTER WHEELS ARE BETTER

All REED cutter wheels for metal pipe are made from high shock-resistant tool steel, while competitive wheels are made from carbon steel or lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. As a result of this high quality, certified material, only REED wheels can be heat treated for the perfect balance between hardness and toughness to make the wheels resist breakage and last longer.

REED pioneered the development of wheels for plastic pipe and today has the widest variety and highest quality wheels for various types and wall thicknesses of plastic pipe and tubing. REED wheels are the best value for use in REED cutters, or in the cutters of any other manufacturer.

PRODUCT CODE DESCRIPTION BOX QTY.FOR METAL AND PLASTIC CUTTERS

0 CUTTER WHEEL FOR COPPER REED 12OSS CUTTER WHEEL FOR S/STEEL REED 12

30-40 CUTTER WHEEL FOR COPPER REED 12

30-40SS CUTTER:WHEELFOR.S/STEEL REED 12

32633 CUTTER WHEEL FOR COPPER REED 12



CODE STD. PACK APPLICATIONRX13P105 3 STEELRX13P305 3 STEEL

RX13P405 3 STEEL

RX13P670 12 STEEL & DUCTILE IRON

RX424231 1 COPPER

RX424232 1 COPPER

RX424234 1 COPPER

RX424240 1 THIN WALL STAINLESS STEEL



1.13 CUTTER WHEELSCONT

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



FOR PIPE CUTTERS2RBS CUTTER WHEEL FOR STEEL REED 12

2RBHD CUTTER WHEEL FOR H/DUTY STEEL REED 12

3RG CUTTER WHEEL FOR STEEL REED 4

3RGCI CUTTER WHEEL FOR IRON REED 4

FOR HINGED CUTTERSHS2½ CUTTER WHEEL FOR STEEL REED 4

HS4 CUTTER WHEEL FOR STEEL REED 4


HS8-12 CUTTER WHEEL FOR STEEL REED 4

HX4 CUTTER WHEEL FOR H/DUTY STEEL REED 4


HI4 CUTTER WHEEL FOR IRON REED 4


H6PSE5 CUTTER WHEEL FOR STEEL & IRON REED 4

FOR ROTARY CUTTERSRCI8-30 CUTTER WHEEL FOR CAST IRON; DUCTILE IRON (MANUAL) 4

RCS8-36 CUTTER WHEEL FOR STEEL REED 4

RCI8-36 CUTTER WHEEL FOR IRON REED 4

RCDX CUTTER WHEEL FOR H/DUTY IRON REED 4

RCX CUTTER WHEEL FOR H/DUTY STEEL REED 4


75046 CUTTER WHEEL FOR S/STEEL REED 12


345T CUTTER WHEEL FOR COPPER REED 12

R4546 CUTTER WHEEL FOR S/STEEL REED 6

70R03 CUTTER WHEEL FOR COPPER REED 6


8041 CUTTER WHEEL FOR COPPER W/REX


OP2 CUTTER WHEEL FOR PLASTIC REED

1-2PVC CUTTER WHEEL FOR PLASTIC REED 12

30-40P CUTTER WHEEL FOR PLASTIC REED 12


6QP CUTTER WHEEL FOR PLASTIC REED 4

80P CUTTER WHEEL FOR PLASTIC REED 4

680PVC CUTTER WHEEL FOR PLASTIC REED 4

TUBE WORKING TOOLS

36

All Reed wheels are checked extensively to precise dimensions, hardness and durability of edge and blade. They last up to three times as long as competitive wheels, operate easier and faster, yet cost no more. BROKEN BOX QUANTITIES INCUR A 12.5% SURCHARGE

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



FOR PIPE CUTTERS2RBS CUTTER WHEEL FOR STEEL REED 12

2RBHD CUTTER WHEEL FOR H/DUTY STEEL REED 12

3RG CUTTER WHEEL FOR STEEL REED 4

3RGCI CUTTER WHEEL FOR IRON REED 4

FOR HINGED CUTTERSHS2½ CUTTER WHEEL FOR STEEL REED 4



HS8-12 CUTTER WHEEL FOR STEEL REED 4





H6PSE5 CUTTER WHEEL FOR STEEL & IRON REED 4

FOR ROTARY CUTTERSRCI8-30 CUTTER WHEEL FOR CAST IRON; DUCTILE IRON (MANUAL) 4

RCS8-36 CUTTER WHEEL FOR STEEL REED 4

RCI8-36 CUTTER WHEEL FOR IRON REED 4

RCDX CUTTER WHEEL FOR H/DUTY IRON REED 4

RCX CUTTER WHEEL FOR H/DUTY STEEL REED 4




345T CUTTER WHEEL FOR COPPER REED 12

R4546 CUTTER WHEEL FOR S/STEEL REED 6

70R03 CUTTER WHEEL FOR COPPER REED 6




OP2 CUTTER WHEEL FOR PLASTIC REED


30-40P CUTTER WHEEL FOR PLASTIC REED 12


6QP CUTTER WHEEL FOR PLASTIC REED 4

80P CUTTER WHEEL FOR PLASTIC REED 4

680PVC CUTTER WHEEL FOR PLASTIC REED 4

TUBE WORKING TOOLS

36

All Reed wheels are checked extensively to precise dimensions, hardness and durability of edge and blade. They last up to three times as long as competitive wheels, operate easier and faster, yet cost no more. BROKEN BOX QUANTITIES INCUR A 12.5% SURCHARGE

PLUMBOSSAUSTRALIA


CUTTER WHEEL KIT

The Most Universal Cutting Wheel Kit includes wheels to cut copper, stainless steel and PVC for your most popular cutters: Reed, Ridgid, Rothenberger, Record, Imperial, and Silva. 30 wheels included ensuring that you have the Right Wheel at the Right time and the Right Price!!

CWK18 INCLUDES TWO OF EACH OF THE FOLLOWING:75015 73505O 2RBS70R03 30-40345T 30-40PR4546

CWK30 INCLUDES THE FOLLOWING:5x 75015 2x 735055x O 2x 2RBS2x 70R03 2x 30-405x 345T 2x 30-40P5x R4546

PRODUCT CODE DESCRIPTIONCWK30 30 PCE CUTTER WHEEL KIT REEDCWK18 18 PCE CUTTER WHEEL KIT REED

CWK30 KIT

37

TUBE

WOR

KING

TOOL

SPL

UMBO

SSSU

PPLY

PLU

MBIN

G,IN

DUST

RIAL

, ELE

CTRI

CAL &

REF

RIGE

RATI

ON E

QUIP

MENT

PRODUCT CODE DESCRIPTION BOX QTY.REX CUTTER WHEELS

RX13P105 CUTTER WHEEL FOR STEEL PIPE REX 3



RX13P670 CUTTER WHEEL FOR STEEL & DUCTILE IRON REX 12

RX424231 CUTTER WHEEL FOR COPPER REX 1



RX424240 CUTTER WHEEL FOR THIN WALL STAINLESS STEEL REX 1



Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


2pipe working tools

2.1 PIPE BENDERS 2

2.2 PLASTIC PIPE CUTTERS 2

2.3 DEBURRER 7

2.4 PLUMBOSS POLY PIPE WELDING 7

2.5 PE SHUT-OFF TOOLS 10

2.6 FIRE HYDRANT STOPPERS 12

2.7 PLASTIC PIPE BEVELLERS 12

2.8 STEEL PIPE CUTTERS 13

2.9 LARGE CUTTERS 14

2.10 MANUAL CHAIN CUTTERS 16

2.11 HYDRAULIC CHAIN CUTTERS 16

2.12 HYDRAULIC PIPE CUTTER & POWER PACK 20

2.13 UNIVERSAL PIPE CUTTER 21

2.14 PCS8+ PIPE CUTTING SYSTEM 22

2.15 BAND SAW 23

2.16 DM2100BSPT DRILLING MACHINE 24

2.17 PIPE JOINERS 25

2.18 PIPE LOCATORS 26

2.19 FOG GENERATOR 27

2.20 PIPE DESCALERS 28

2.21 PIPE FREEZING EQUIPMENT 29

2.22 MANHOLE LID LIFTERS / WATER KEYS 31

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


2.1 PIPE BENDERS

2.2 PLASTIC PIPE CUTTERS

PRODUCT CODE DESCRIPTIONGALB12-2 GALVANISED PIPE BENDER 1/2” - 2”

PRODUCT CODE DESCRIPTION SECTIONS USEDPLAS0 LARGE DIAMETER PIPE CUTTER 110mm-240mm A0, C0PLAS1 LARGE DIAMETER PIPE CUTTER 160mm-335mm A, B, CPLAS2 LARGE DIAMETER PIPE CUTTER 355mm-500mm B, C (2), DPLAS3 LARGE DIAMETER PIPE CUTTER 355mm-630mm B, C (3), DPLAS4 LARGE DIAMETER PIPE CUTTER 355mm-800mm B, C (4), D

GAL. PIPE BENDERThis Hydraulic Bender is for bending ½” - 2” Gal/Mild Steel Pipe. Comes complete with 12 ton hydraulic ram and formers to suit ½”, ¾”, 1”, 1 ¼”, 1 ½”, and 2” Nominal Bore Pipe.

PLAS CUTTER – FOR LARGE DIAMETER PIPE

The Plas Cutter is excellent for in trench or above ground cutting, requiring only 6” – 8” clearance around PVC or PE pipe. Outboard rollers keep cutter aligned on pipe to ensure a square cut. Cutter can also simultaneously produce a 15˚ bevel on both sides of cut. Long lasting, carbide tipped blades penetrate up to 2” wall thickness. The Plas Cutter unit includes both bevel and cutting blades.

Bevel Blade Plas Cutter Cutter Sections

PLAS LARGE DIAMETER PLASTIC PIPE CUTTER WILL CUT PVC AND PE PIPE (SOME TIMES USED FOR CUTTING AC PIPE). SPECIFIC LIMITATIONS FOR PE PIPE ARE AS FOLLOWS: 2” wall thickness PE - up to 14” pipe. 1 1/2” wall thickness PE - up to 18” pipe, 1” wall thickness PE - up to 28” pipe.

PIPE WORKING TOOLS

2PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


2.1 PIPE BENDERS

2.2 PLASTIC PIPE CUTTERS

PRODUCT CODE DESCRIPTIONGALB12-2 GALVANISED PIPE BENDER 1/2” - 2”

PRODUCT CODE DESCRIPTION SECTIONS USEDPLAS0 LARGE DIAMETER PIPE CUTTER 110mm-240mm A0, C0PLAS1 LARGE DIAMETER PIPE CUTTER 160mm-335mm A, B, CPLAS2 LARGE DIAMETER PIPE CUTTER 355mm-500mm B, C (2), DPLAS3 LARGE DIAMETER PIPE CUTTER 355mm-630mm B, C (3), DPLAS4 LARGE DIAMETER PIPE CUTTER 355mm-800mm B, C (4), D

GAL. PIPE BENDERThis Hydraulic Bender is for bending ½” - 2” Gal/Mild Steel Pipe. Comes complete with 12 ton hydraulic ram and formers to suit ½”, ¾”, 1”, 1 ¼”, 1 ½”, and 2” Nominal Bore Pipe.

PLAS CUTTER – FOR LARGE DIAMETER PIPE

The Plas Cutter is excellent for in trench or above ground cutting, requiring only 6” – 8” clearance around PVC or PE pipe. Outboard rollers keep cutter aligned on pipe to ensure a square cut. Cutter can also simultaneously produce a 15˚ bevel on both sides of cut. Long lasting, carbide tipped blades penetrate up to 2” wall thickness. The Plas Cutter unit includes both bevel and cutting blades.

Bevel Blade Plas Cutter Cutter Sections

PLAS LARGE DIAMETER PLASTIC PIPE CUTTER WILL CUT PVC AND PE PIPE (SOME TIMES USED FOR CUTTING AC PIPE). SPECIFIC LIMITATIONS FOR PE PIPE ARE AS FOLLOWS: 2” wall thickness PE - up to 14” pipe. 1 1/2” wall thickness PE - up to 18” pipe, 1” wall thickness PE - up to 28” pipe.

PIPE WORKING TOOLS

2PLUMBOSS

AUSTRALIA

PRODUCT CODE DESCRIPTION CUTTER BLADEHPC8 90 – 225mm GUILLOTINE PIPE CUTTER HPC8BHPC12 125 – 350mm GUILLOTINE PIPE CUTTER HPC12B

PRODUCT CODE DESCRIPTION CUTTER WHEELTC1QP PLASTIC PIPE CUTTER 1/8”- 1 5/16” (3mm-33mm) 0P2TC2QP PLASTIC PIPE CUTTER 1/4”- 2 5/8” (6mm-63mm) 0P2TC3QP PLASTIC PIPE CUTTER 3/8”- 3 1/2” (10mm-90mm) 30-40PTC4QP PLASTIC PIPE CUTTER 1 7/8”-4 1/2” (48mm-114mm) 30-40PTC6QP PLASTIC PIPE CUTTER 4”- 6 5/8” (102mm-168mm) 30-40P

TC8Q680PVC PLASTIC PIPE CUTTER 6 1/4” - 10” (159mm-254mm) 680PVC

2.2 PLASTIC PIPE CUTTERSCONT GUILLOTINE CUTTER

Guillotine cutters are designed to cut up to 315mm medium and high density pipe so that no facing is needed for electro-fusion and only minimal facing is needed for butt fusion joints. It’s durable, Teflon® -coated blade makes many square cuts with no chips to clog valves and small openings.

QUICK RELEASE™ CUTTERS

QUICK RELEASE™ tubing cutters were invented by REED and cover capacities up to 10” (254mm). REED uses a ball detent or threaded screw for the wheel pin, whereas competitors use a grooved pin and clip which is easily lost and makes wheel change extremely difficult. REED has cutter wheels for all plastic applications.

These style cutters are available to cut copper, refer to page Page 18 of Tube Working. Spare wheels - page 35 of Tube working

3 PI

PEW

ORKI

NGTO

OLS

SERV

ING

AUST

RALI

A’STR

ADES

MEN

SINC

E 19

86

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


PRODUCT CODE DESCRIPTIONSC1 POLY SCISSOR SHEAR-32mm cap. plumBOSS

SC125 POLY SCISSOR SHEAR-42mm cap. plumBOSS SC1B BLADE FOR SC1 SCISSOR SHEAR

SC125B BLADE FOR SC125 SCISSOR SHEAR

PRODUCT CODE DESCRIPTIONRS1 POLY RATCHET SHEAR - 42mm cap. REED RS2 POLY RATCHET SHEAR - 63mm cap. REED S25 POLY RATCHET SHEAR - 32mm cap. SILVA S42 POLY RATCHET SHEAR - 42mm cap. SILVA

PE42 POLY RATCHET SHEAR - 42mm cap.RS2PB PLUMBOSS POLY RATCHET SHEAR - 63mm cap.

2.2 PLASTIC PIPE CUTTERSCONT

SCISSOR SHEARS

Scissor shears squeeze together for fast cutting of thin wall and small diameter plastic, rubber, or nylon tubing. Replacement Teflon®-coated blades are available for both sizes.

RATCHET SHEARS

Ratchet Shears offer good mechanical advantage and smooth easy operation.

RS1 is designed for one-hand cuts, �and will also cut utility tracer wire

RS2 is designed with v-style jaw shape and �

long handles for leverage on tough to cut pipe.

RS1

RS2

SC1

SC125

RS2PBPE42PIPE WORKING TOOLS

4PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


PRODUCT CODE DESCRIPTIONSC1 POLY SCISSOR SHEAR-32mm cap. plumBOSS

SC125 POLY SCISSOR SHEAR-42mm cap. plumBOSS SC1B BLADE FOR SC1 SCISSOR SHEAR

SC125B BLADE FOR SC125 SCISSOR SHEAR

PRODUCT CODE DESCRIPTIONRS1 POLY RATCHET SHEAR - 42mm cap. REED RS2 POLY RATCHET SHEAR - 63mm cap. REED S25 POLY RATCHET SHEAR - 32mm cap. SILVA S42 POLY RATCHET SHEAR - 42mm cap. SILVA

PE42 POLY RATCHET SHEAR - 42mm cap.RS2PB PLUMBOSS POLY RATCHET SHEAR - 63mm cap.


SCISSOR SHEARS

Scissor shears squeeze together for fast cutting of thin wall and small diameter plastic, rubber, or nylon tubing. Replacement Teflon®-coated blades are available for both sizes.

RATCHET SHEARS

Ratchet Shears offer good mechanical advantage and smooth easy operation.

RS1 is designed for one-hand cuts, �and will also cut utility tracer wire

RS2 is designed with v-style jaw shape and �

long handles for leverage on tough to cut pipe.

RS1

RS2

SC1

SC125

RS2PBPE42PIPE WORKING TOOLS

4PLUMBOSS

AUSTRALIA

PRODUCT CODE DESCRIPTION DISCOUNT QTYWR626 CABLE SAW 10


CABLE SAW

For Two-Handed Use.�

Cuts wood and plastics in awkward locations, �where other saws fail, with limited access.

Omni directional - cuts contours radii �and straight lines in any direction

Ideal for cutting plastic pipes�

HAND SAWS

PLASTIC PIPE SAW – REED PPS18 - Tooth design, tooth set and hardness simplify cuts on ABS and PVC pipe. Die cast design of handle makes blade change fast and easy. Blades allow simultaneous cutting forward and backward improving productivity by 50% over competitive saws!

XPERT HANDSAWSNon-slip comfortable grip handle �

Premium 0.85mm thick steel for �better stability while cutting

45˚ mitre and 90° square built into handle �

Hard point razor sharp teeth cut 40% faster �than traditional saws. Stays sharper longer and cuts both across and with the grain.

XP2001500 - 8 point universal hard point Saw 20” (500mm)

XP2049325 - Veneer Saw 13 point, cross-cut toothing 13” (325mm) Very fine hard point teeth, for cutting delicate material like thin plywood and PVC. The short thick blade means less chance of buckling while using. Round nose with cutting teeth allows for deburring of PVC pipe.

5 PI

PEW

ORKI

NGTO

OLS

PLUM

BOSS

- AU

STRA

LIA’S

OWN

PLUM

BING

TOOL

SPEC

IALI

STS

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



HAND SAWS CONTINUED

TOOL BOX SAW PL2001350 - 8 point universal toothing 14” (350mm)

Ground teeth �

Unbreakable, ultra-sonically welded plastic handle �

45˚ and 90° angles �

Swedish steel blade �

Hard point �

NOTE: Hard point teeth are harder than a file and will last 6 - 8 times longer than non-hardened teeth. Hard point teeth cannot be resharpened.

HANDSAW - BAHCO 309 - LENGTH: 20” (500mm) TEETH/POINTS: 8/10

Super cut bevel ground teeth �

Special blade shape for extra rigidity and depth �

Creates a very fine cut.

INTERNAL PIPE CUTTERS – REEDInternal pipe cutters are used to cut pipe from the inside. The heat treated steel saw tooth blades on the IC1S allows fast cutting. The IC1A is a great abrasive blade for situations where the blade may come in contact with concrete or other hard surfaces.

PRODUCT CODE DESCRIPTIONPPS18 PLASTIC PIPE SAW - 4” cap. (16” length) REED

PPS18B BLADE FOR PPS18 SAW REED.XP2001500 XPERT HAND SAW 20” (500mm) JACK XP2049325 XPERT VENEER SAW 13” (325mm) JACKPL2001350 TOOL BOX SAW 14” (350mm) JACK

309 HAND SAW 20” (500mm) BAHCOIC1S INTERNAL PIPE CUTTER 1 ¼” MINIMUM I.D SAWIC1SL INTERNAL PIPE CUTTER 1 ¼” MINIMUM I.D SAW - LONGIC1A INTERNAL PIPE CUTTER 1 ½” MINIMUM I.D ABRASIVE

IC1AL INTERNAL PIPE CUTTER 1 ½” MINIMUM I.D ABRASIVE – LONGIC1RA IC1 ABRASIVE BLADEIC1RS IC1 SAW BLADEPIPE W

ORKING TOOLS 6

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



HAND SAWS CONTINUED

TOOL BOX SAW PL2001350 - 8 point universal toothing 14” (350mm)

Ground teeth �


45˚ and 90° angles �


Hard point �

NOTE: Hard point teeth are harder than a file and will last 6 - 8 times longer than non-hardened teeth. Hard point teeth cannot be resharpened.

HANDSAW - BAHCO 309 - LENGTH: 20” (500mm) TEETH/POINTS: 8/10

Super cut bevel ground teeth �

Special blade shape for extra rigidity and depth �

Creates a very fine cut.

INTERNAL PIPE CUTTERS – REEDInternal pipe cutters are used to cut pipe from the inside. The heat treated steel saw tooth blades on the IC1S allows fast cutting. The IC1A is a great abrasive blade for situations where the blade may come in contact with concrete or other hard surfaces.


PPS18B BLADE FOR PPS18 SAW REED.XP2001500 XPERT HAND SAW 20” (500mm) JACK XP2049325 XPERT VENEER SAW 13” (325mm) JACKPL2001350 TOOL BOX SAW 14” (350mm) JACK

309 HAND SAW 20” (500mm) BAHCOIC1S INTERNAL PIPE CUTTER 1 ¼” MINIMUM I.D SAWIC1SL INTERNAL PIPE CUTTER 1 ¼” MINIMUM I.D SAW - LONGIC1A INTERNAL PIPE CUTTER 1 ½” MINIMUM I.D ABRASIVE

IC1AL INTERNAL PIPE CUTTER 1 ½” MINIMUM I.D ABRASIVE – LONGIC1RA IC1 ABRASIVE BLADEIC1RS IC1 SAW BLADEPIPE W

ORKING TOOLS 6

PLUMBOSSAUSTRALIA

7 PI

PEW

ORKI

NGTO

OLS

AUST

RALI

A’S T

RUST

ED P

LUMB

ING

TOOL

BRA

ND

2.3 DEBURRER

PRODUCT CODE DESCRIPTIONDEB2 POLY PIPE DEBURRING TOOL 2” CAPACITY

DEB2 – Deburrs Inner and Outer edges of poly pipe up to 2” in diameter.

2.4 PLUMBOSS POLY PIPE WELDING

SITE PE BUTT FUSION MACHINES

These units feature:

Block structure, light weight and high rigidity.�

Separate reducing inserts suitable for wide range of pipe sizes, guaranteeing accurate �positioning without pressure loss.

Also suitable for welding fittings, flanges and valves.�

Integrated pressure holding device. �

Pressure can be adjusted accurately.�

High precision thermostat, precise temperature gradient.�

Automatic ejection of heating element ensures accurate timing and vertical �positioning to avoid human factors and to reduce risk of time limit problems.

Micro-switch on scraper reduces risk of injury.�

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


2.4 PLUMBOSS POLY PIPE WELDINGCONT

PROTOFUSE®

Fusion Parameter Monitoring Butt Fusion Machines Input the OD and wall thickness of the pipe and the PROTOFUSE® will calculate the heating temperature, time, and pressure for the whole fusion procedure.It times the whole fusion process automatically but the pressure needs to be adjusted manually. The fusion data can be easily downloaded by the interface connected to a computer for data retrieval and printing.

Fusion Parameter Monitoring Type (PROTOFUSE® series): comes complete with frame, hydraulic system with fusion parameter monitoring device, auto-ejected heating element, scraper, heating element and scraper support and inserts.

PRODUCT CODE DESCRIPTION160/M SEMI-AUTO 160mm SITE PE BUTT FUSION W/ 63mm, 90mm AND 110mm INSERTS250/M SEMI AUTO 250mm SITE PE BUTT FUSION W/ 110mm, 160mm AND 200mm INSERTS315/M SEMI AUTO 315mm SITE PE BUTT FUSION W/ 160mm, 200mm AND 250mm INSERTS

PIPEFUSE®

There are two basic types of Butt Fusion Machines in the PIPEFUSE® series: Manual and Auto-ejected Heater Type. The PIPEFUSE® Auto-ejected Heater Type series can be upgraded to PROTOFUSE® (Fusion Parameter Monitoring) and PILOTFUSE® (Fully Automatic) series with the addition of accessories.

Manual Heater Type (PIPEFUSE® PF/M series):�comes complete with frame, manual hydraulic unit, manual heating element, scraper, heating element and scraper support and inserts.

Auto-ejected Heater Type (PIPEFUSE® PF/A�series): comes complete with frame, manual hydraulic unit, auto-ejected heating element, scraper, heating element and scraper support and inserts.

PRODUCT CODE DESCRIPTIONPF160/M MANUAL 160mm SITE PE BUTT FUSION W/ 63mm, 90mm AND 110mm INSERTSPF250/M MANUAL 250mm SITE PE BUTT FUSION W/ 110mm, 160mm AND 200mm INSERTSPF315/M MANUAL 315mm SITE PE BUTT FUSION W/ 160mm, 200mm AND 250mm INSERTSPF160/A AUTO 160mm SITE PE BUTT FUSION W/ 63mm, 90mm AND 110mm INSERTSPF250/A AUTO 250mm SITE PE BUTT FUSION W/ 110mm, 160mm AND 200mm INSERTSPF315/A AUTO 315mm SITE PE BUTT FUSION W/ 160mm, 200mm AND 250mm INSERTS

PIPE WORKING TOOLS

8PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



PROTOFUSE®

Fusion Parameter Monitoring Butt Fusion Machines Input the OD and wall thickness of the pipe and the PROTOFUSE® will calculate the heating temperature, time, and pressure for the whole fusion procedure.It times the whole fusion process automatically but the pressure needs to be adjusted manually. The fusion data can be easily downloaded by the interface connected to a computer for data retrieval and printing.

Fusion Parameter Monitoring Type (PROTOFUSE® series): comes complete with frame, hydraulic system with fusion parameter monitoring device, auto-ejected heating element, scraper, heating element and scraper support and inserts.

PRODUCT CODE DESCRIPTION160/M SEMI-AUTO 160mm SITE PE BUTT FUSION W/ 63mm, 90mm AND 110mm INSERTS250/M SEMI AUTO 250mm SITE PE BUTT FUSION W/ 110mm, 160mm AND 200mm INSERTS315/M SEMI AUTO 315mm SITE PE BUTT FUSION W/ 160mm, 200mm AND 250mm INSERTS

PIPEFUSE®

There are two basic types of Butt Fusion Machines in the PIPEFUSE® series: Manual and Auto-ejected Heater Type. The PIPEFUSE® Auto-ejected Heater Type series can be upgraded to PROTOFUSE® (Fusion Parameter Monitoring) and PILOTFUSE® (Fully Automatic) series with the addition of accessories.

Manual Heater Type (PIPEFUSE® PF/M series):�comes complete with frame, manual hydraulic unit, manual heating element, scraper, heating element and scraper support and inserts.

Auto-ejected Heater Type (PIPEFUSE® PF/A�series): comes complete with frame, manual hydraulic unit, auto-ejected heating element, scraper, heating element and scraper support and inserts.

PRODUCT CODE DESCRIPTIONPF160/M MANUAL 160mm SITE PE BUTT FUSION W/ 63mm, 90mm AND 110mm INSERTSPF250/M MANUAL 250mm SITE PE BUTT FUSION W/ 110mm, 160mm AND 200mm INSERTSPF315/M MANUAL 315mm SITE PE BUTT FUSION W/ 160mm, 200mm AND 250mm INSERTSPF160/A AUTO 160mm SITE PE BUTT FUSION W/ 63mm, 90mm AND 110mm INSERTSPF250/A AUTO 250mm SITE PE BUTT FUSION W/ 110mm, 160mm AND 200mm INSERTSPF315/A AUTO 315mm SITE PE BUTT FUSION W/ 160mm, 200mm AND 250mm INSERTS

PIPE WORKING TOOLS

8PLUMBOSS

AUSTRALIA

2.4 PLUMBOSS POLY PIPE WELDINGCONT 2.4 PLUMBOSS POLY PIPE WELDINGCONT

PILOTFUSE®

Fully Automatic Butt Fusion Machines

The PILOTFUSE® can automatically control the whole fusion procedure by inputting only the OD and wall thickness of the pipe. Data download and printing is also available.

Fully Automatic Type (PILOTFUSE® series) comes complete with frame, automatic controller, auto-ejected heating element, scraper, heating element and scraper support and inserts.

PRODUCT CODE DESCRIPTION160/A AUTO SITE PE BUTT FUSION MACHINE 160mm (w/ inserts)250/A AUTO SITE PE BUTT FUSION MACHINE 250mm (w/ inserts)315/A AUTO SITE PE BUTT FUSION MACHINE 315mm (w/ inserts)

LARGER SIZES AVAILABLEWORKSHOP MACHINES AVAILABLE

9 PI

PEW

ORKI

NGTO

OLS

THE

TUBE

& P

IPE

TOOL

SPEC

IALI

STS

SOCKET WELDING MACHINE

These machines are used for welding of plastic pipes and socket fusion fittings during the installation of pipe work systems. They have a temperature range of 50˚C – 300˚C.

They come complete with Socket Fusion Welding Blocks and Accessories.

The SC63 has the following fusion ranges: 20mm, 25mm, 32mm, 40mm, 50mm & 63mm

The SC110 has the following fusion ranges: 75mm, 90mm & 110mm

SC63

SC110

PRODUCT CODE DESCRIPTIONSC63 63MM HAND HELD SOCKET FUSION WELDING KIT (800W)SC110 110MM SOCKET FUSION - PLASTIC PIPE WELDING KIT (1500W)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


PRODUCT CODE DESCRIPTIONPFS01 HAND HELD MANUAL SCRAPER FOR POLY WELDING

PFS120 120mm MECHANICAL SCRAPER FOR POLY WELDINGPFS160 160mm MECHANICAL SCRAPER FOR POLY WELDINGPFS200 200mm MECHANICAL SCRAPER FOR POLY WELDINGPFSBG BEAD GAUGE

PFDB500 DEBEADER


SCRAPERS FOR POLY PIPE WELDINGMECHANICAL SCRAPERThe rotary scraper is an essential tool for the PE operator due to the importance of scraping away the oxidised PE from the external surface of the pipe; it has to be done before socket and electrofusion welding procedures. The scraping depth is about 0.2mm and the width must be longer than the maximum dimension of the socket.

BEAD GAUGEWhen pipe ends melt and the interface pressure forces the molten material outwards the pipe forms ‘weld beads’ at the outside and inside of the pipe surfaces. The bead gauge is an important tool for measuring the consistency of these ‘weld beads’ when you are fusing pipes together.

DEBEADERThe external weld bead of a PE pipe butt fusion weld is removed using the debeading tool. This tool removes the bead by digging the blade into the bead and then manoeuvring the tool around the pipe using the ratchet handle.

PES01 P.E WATER SERVICE SHUT-OFF TOOL - REEDThe REED PE Shut Off Tool is designed for emergency shut-off of P.E water services. It is hinged at one end with a snap lock device that can be taken apart quickly to allow work in confined areas. Open end has latch to hold tool closed until the repair is made. Zinc plated for corrosion resistance.

2.5 PE SHUT-OFF TOOLS

PIPE WORKING TOOLS

10PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


PRODUCT CODE DESCRIPTIONPFS01 HAND HELD MANUAL SCRAPER FOR POLY WELDING

PFS120 120mm MECHANICAL SCRAPER FOR POLY WELDINGPFS160 160mm MECHANICAL SCRAPER FOR POLY WELDINGPFS200 200mm MECHANICAL SCRAPER FOR POLY WELDINGPFSBG BEAD GAUGE

PFDB500 DEBEADER


SCRAPERS FOR POLY PIPE WELDINGMECHANICAL SCRAPERThe rotary scraper is an essential tool for the PE operator due to the importance of scraping away the oxidised PE from the external surface of the pipe; it has to be done before socket and electrofusion welding procedures. The scraping depth is about 0.2mm and the width must be longer than the maximum dimension of the socket.

BEAD GAUGEWhen pipe ends melt and the interface pressure forces the molten material outwards the pipe forms ‘weld beads’ at the outside and inside of the pipe surfaces. The bead gauge is an important tool for measuring the consistency of these ‘weld beads’ when you are fusing pipes together.

DEBEADERThe external weld bead of a PE pipe butt fusion weld is removed using the debeading tool. This tool removes the bead by digging the blade into the bead and then manoeuvring the tool around the pipe using the ratchet handle.

PES01 P.E WATER SERVICE SHUT-OFF TOOL - REEDThe REED PE Shut Off Tool is designed for emergency shut-off of P.E water services. It is hinged at one end with a snap lock device that can be taken apart quickly to allow work in confined areas. Open end has latch to hold tool closed until the repair is made. Zinc plated for corrosion resistance.

2.5 PE SHUT-OFF TOOLS

PIPE WORKING TOOLS

10PLUMBOSS

AUSTRALIA

PES2CTS P.E SQUEEZE OFF TOOL - REEDBest designed tool for stopping flow in P.E pipe in six sizes from ½” - 2”. It is also available in seven sizes from 2”- 4”. Many extra benefits include affixed bottom bar which swings open to fit over any place on pipe; some aluminium parts for light weight; sliding bar handle for working in tight places; fine pitch thread for controlled squeeze and low effort; and grease fittings for easy operation and long life.

SS01 STANDING SHUT OFF TOOL – REEDThis tool compresses ¾” – 1” PE plastic tubes to stop the flow of water. The tool uses 750mm handles to develop a clamping force in a manner similar to a pair of bolt cutters. The long handles make for easy shut off from above the ditch with a latch to hold the tool closed.NOT INTENDED FOR GAS LINES

HYDRAULIC PE PIPE SHUT OFF TOOLThis hydraulic shut off tool operates by using the manual pump handle. The hydraulic pump action makes it easier to clamp down pipe under pressure.It is the perfect tool for carrying out maintenance and repairs to pipe sizes ranging from 90mm up to 250mm. The pump and shut off mechanism is all one complete unit making it a more space friendly tool.Weight: 75kgHeight: 900mm Length: 550mm Width: 160mmCapacity: 90mm-250mm

11

PIPE

WOR

KING

TOOL

SIM

PORT

ERS

AND

MANU

FACT

URER

S OF

PLU

MBIN

G EQ

UIPM

ENT

2.5 PE SHUT-OFF TOOLSCONT

PESS01 STAINLESS STEEL SHUT OFF TOOL plumBOSS

Stainless steel for longer life and corrosion resistance�

Designed small in order to save space in the tool box�

20mm & 25mm capacity�

Captured bottom bar�

PRODUCT CODE DESCRIPTIONPES01 P.E SHUT-OFF TOOL 19mm & 25mm REED

PES2CTS P.E SQUEEZE OFF TOOL 15mm - 50mm REED PESS01 P.E SQUEEZE OFF TOOL 1” CAP (MADE OF S/STEEL)

SS01 P.E STANDING SHUT-OFF TOOL 19mm - 25mm REEDPEHS010 HYDRAULIC PE PIPE SHUT OFF TOOL

SUITABLE FOR GAS LINES

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


2.7 PLASTIC PIPE BEVELLERS

REEDHand operated bevellers are much faster and far more effective than a file or gas saw so there is less chance of leaks. With a strong aluminium alloy frame, effective roller locking and good tool life, a smooth 15° bevel is produced on all types of plastic pipe including gasketed PVC pipe, in about one minute. It is easily adjustable for different pipe sizes and thicknesses, with no part changes.

WHEELER9015 – this plastic pipe beveller makes a 15˚ bevel on SDR35 and Sch 40 thermoplastic pipe through 12” (300mm) capacity. It is light weight and easy to adjust to different wall thickness for bevelling and deburring. It is designed with a wide saddle that won’t twist and dig into the pipe like other bevellers.

BEVELLER 9000The 9000 power beveller is designed for a wide variety of situations including high production applications. The advanced HSS cutter design makes a smooth 15˚ bevel which is adjustable for length and depth. The 9000 is easy to use and drastically reduces bevelling time, especially on large pipe sizes or when doing production bevelling.

HEAVY DUTY MOTOR:7.5 AMP22,000 RPM

2.6 FIRE HYDRANT STOPPERS

PRODUCT CODE DESCRIPTIONFHSBH FIRE HYDRANT STOPPER - BOLT HEAD FHSSQ FIRE HYDRANT STOPPER - SQUARE HEAD

FHSMSQ FIRE HYDRANT STOPPER - MINI SQUARE HEAD

This unit is designed to provide temporary sealing of faulty fire hydrants until traffic conditions or work load permit repair work to be done Available in 3 head styles: Bolt Head, Square Head and Mini Square Head

PIPE WORKING TOOLS

12PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


2.7 PLASTIC PIPE BEVELLERS

REEDHand operated bevellers are much faster and far more effective than a file or gas saw so there is less chance of leaks. With a strong aluminium alloy frame, effective roller locking and good tool life, a smooth 15° bevel is produced on all types of plastic pipe including gasketed PVC pipe, in about one minute. It is easily adjustable for different pipe sizes and thicknesses, with no part changes.

WHEELER9015 – this plastic pipe beveller makes a 15˚ bevel on SDR35 and Sch 40 thermoplastic pipe through 12” (300mm) capacity. It is light weight and easy to adjust to different wall thickness for bevelling and deburring. It is designed with a wide saddle that won’t twist and dig into the pipe like other bevellers.

BEVELLER 9000The 9000 power beveller is designed for a wide variety of situations including high production applications. The advanced HSS cutter design makes a smooth 15˚ bevel which is adjustable for length and depth. The 9000 is easy to use and drastically reduces bevelling time, especially on large pipe sizes or when doing production bevelling.

HEAVY DUTY MOTOR:7.5 AMP22,000 RPM

2.6 FIRE HYDRANT STOPPERS

PRODUCT CODE DESCRIPTIONFHSBH FIRE HYDRANT STOPPER - BOLT HEAD FHSSQ FIRE HYDRANT STOPPER - SQUARE HEAD

FHSMSQ FIRE HYDRANT STOPPER - MINI SQUARE HEAD

This unit is designed to provide temporary sealing of faulty fire hydrants until traffic conditions or work load permit repair work to be done Available in 3 head styles: Bolt Head, Square Head and Mini Square Head

PIPE WORKING TOOLS

12PLUMBOSS

AUSTRALIA

13

PIPE

WOR

KING

TOOL

SPL

UMBO

SSSU

PPLY

PLUM

BING

,IND

USTR

IAL,

ELEC

TRIC

AL &

REF

RIGE

RATI

ONEQ

UIPM

ENT

2.7 PLASTIC PIPE BEVELLERSCONT

PRODUCT CODE DESCRIPTIONBT1 PLASTIC PIPE BEVELLER 1 ½” - 8” cap. REED BT2 PLASTIC PIPE BEVELLER 1 ½” - 12” cap. REED 9015 PLASTIC PIPE BEVELLER 1 ½” - 12” (38mm-300mm)9000 ELECTRIC PIPE BEVELLER 4” and up

2.8 STEEL PIPE CUTTERS

*2RBC1 Wheels are also available for cast iron

4 WHEEL CUTTER WITH GUIDES 1/2”- 2” (21mm - 63mm) cap. REED

Spring tensioned guide bars provide square alignment for four wheel cutters. Guide Bars are exclusive to REED. Best way to get a square cut on stainless steel and corroded pipe. Guide bars also reduce wheel breakage. Features short handle for close quarter work.

STANDARD STEEL CUTTERS

The REED one wheel Gal. Pipe Cutter features one fast cutting wheel and two wide rollers. These rollers keep the cutter squarely on track and also smooth down the burr leaving a smooth clean cut.

Available in REED ⅛” - 2” (10mm - 63mm)

The REX Gal. Pipe Cutter is a one wheel cutter. Its main body is made from tempered steel which ensures it high durability and long life. REX Gal. Pipe Cutters are available in up to 4”

The REX LINK CUTTER is a circumference of linked cutter wheels used for cutting steel and ductile iron. It is easy to change size by simply changing the number of links. Clamp with ratchet wrench and move handle back and forth 60˚ to 100˚ to cut.

PRODUCT CODE DESCRIPTION CUTTER WHEEL2-4WGA STEEL PIPE CUTTER W/-GUIDES 1/2”-2” REED 2RBS*

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


2.9 LARGE CUTTERS

SAW IT™ PNEUMATIC SAW

SAW IT™ provides pneumatic power and reciprocating motion to blades. With blade variations it cuts plastic (PVC/ABS), copper, steel, stainless steel, aluminium and ductile iron (unlined) pipe. SAW IT™ cuts with minimal clearance needed under the pipe. Cuts up to 12” (305mm) diameter pipe with a single set up or up to 24” (610mm) maximum pipe with optional chain extensions and several clampings. Pneumatic saws are less likely to ignite materials than gas powered saws and even some electrical powered saws. However the SAW IT™ is not recommended for gas lines.The SAW IT™ VISE (sold separately) fits 4” – 12” diameter pipe and provides stability for the cut.

PRODUCTCODE

DESCRIPTION

SAWIT PNEUMATIC SAW (AIR CONSUMPTION = 50CFM @ 90psi. CUTS 300 STROKES P/M) SAWITVISE 102mm – 305mm PIPE VICE TO SUIT SAW IT™

BLADESNOTE: BLADE LENGTH SHOULD BE AT LEAST 6” MORE THAN O.D OF THE PIPE

Z1214 14TPI BIMETAL POWER HACK SAW BLADES (300mm x 35 x1.6) Z1614 14TPI BIMETAL POWER HACK SAW BLADES (400mm x 35 x 1.6)Z2114 14TPI BIMETAL POWER HACK SAW BLADES (530mm x 35 x1.6)

Z2414 14TPI BIMETAL POWER HACK SAW BLADES (600mm x 35 x 1.6)Z3014 14TPI BIMETAL POWER HACK SAW BLADES (760mm x 35 x 1.6)Z1608 8TPI BIMETAL POWER HACK SAW BLADES (400mm x 35 x 1.6)

PRODUCT CODE DESCRIPTION CUTTER WHEEL2-1 STEEL PIPE CUTTER ⅛” - 2” (10mm - 63mm) REED 2RBS

RX1301P2 STEEL PIPE CUTTER ⅛” - 2” (6mm - 50mm) REX RX13P105RX1301P3 STEEL PIPE CUTTER 1” - 3” (25mm – 80mm) REX RX13P305RX1301P4 STEEL PIPE CUTTER 2 ½” - 4” (65mm – 100mm) REX RX13P405RX1302P2 LINK STEEL/DUCTILE IRON CUTTER 3” – 10” (80mm – 250mm) RX13P670

2.8 STEEL PIPE CUTTERSCONT

PIPE WORKING TOOLS

14PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


2.9 LARGE CUTTERS

SAW IT™ PNEUMATIC SAW

SAW IT™ provides pneumatic power and reciprocating motion to blades. With blade variations it cuts plastic (PVC/ABS), copper, steel, stainless steel, aluminium and ductile iron (unlined) pipe. SAW IT™ cuts with minimal clearance needed under the pipe. Cuts up to 12” (305mm) diameter pipe with a single set up or up to 24” (610mm) maximum pipe with optional chain extensions and several clampings. Pneumatic saws are less likely to ignite materials than gas powered saws and even some electrical powered saws. However the SAW IT™ is not recommended for gas lines.The SAW IT™ VISE (sold separately) fits 4” – 12” diameter pipe and provides stability for the cut.

PRODUCTCODE

DESCRIPTION

SAWIT PNEUMATIC SAW (AIR CONSUMPTION = 50CFM @ 90psi. CUTS 300 STROKES P/M) SAWITVISE 102mm – 305mm PIPE VICE TO SUIT SAW IT™

BLADESNOTE: BLADE LENGTH SHOULD BE AT LEAST 6” MORE THAN O.D OF THE PIPE

Z1214 14TPI BIMETAL POWER HACK SAW BLADES (300mm x 35 x1.6) Z1614 14TPI BIMETAL POWER HACK SAW BLADES (400mm x 35 x 1.6)Z2114 14TPI BIMETAL POWER HACK SAW BLADES (530mm x 35 x1.6)

Z2414 14TPI BIMETAL POWER HACK SAW BLADES (600mm x 35 x 1.6)Z3014 14TPI BIMETAL POWER HACK SAW BLADES (760mm x 35 x 1.6)Z1608 8TPI BIMETAL POWER HACK SAW BLADES (400mm x 35 x 1.6)

PRODUCT CODE DESCRIPTION CUTTER WHEEL2-1 STEEL PIPE CUTTER ⅛” - 2” (10mm - 63mm) REED 2RBS

RX1301P2 STEEL PIPE CUTTER ⅛” - 2” (6mm - 50mm) REX RX13P105RX1301P3 STEEL PIPE CUTTER 1” - 3” (25mm – 80mm) REX RX13P305RX1301P4 STEEL PIPE CUTTER 2 ½” - 4” (65mm – 100mm) REX RX13P405RX1302P2 LINK STEEL/DUCTILE IRON CUTTER 3” – 10” (80mm – 250mm) RX13P670

2.8 STEEL PIPE CUTTERSCONT

PIPE WORKING TOOLS

14PLUMBOSS

AUSTRALIA

15

PIPE

WOR

KING

TOOL

SSE

RVIN

G AU

STRA

LIA’S

TRA

DESM

EN S

INCE

198

6

HINGED CUTTERS - REED

Hinged Cutters are a REED invention! They are lighter, track better for square cuts and require less clearance, yet provide better torque so the cut is made faster and with less effort.

Four wheels cut steel, most stainless steel, cast iron and ductile with only 90˚ to 110˚ handle swing. Only 4” clearance required around most pipes. Strong guide fingers ensure perfect alignment for square cuts. A closed 360˚ frame forces all energy into cutting the pipe for maximum efficiency. There is no shower of sparks in this cold cut. This is the only Hinged Cutter that tracks every time and the only one recommended for ductile iron, steel and stainless steel to Schedule 100

Please specify when ordering what type of pipe you are cutting as blades will vary accordingly. Also available for extra heavy wall steel pipe P.0.A

2.9 LARGE CUTTERSCONT

PRODUCT CODE DESCRIPTIONH2 1/2 HINGED CUTTER 1”- 2 ½” (32mm - 76mm) REED

H4 HINGED CUTTER 2”- 4” (60mm - 125mm) REED H6 HINGED CUTTER 4”- 6” (114mm - 182mm) REED H8 HINGED CUTTER 6”- 8” (168mm - 240mm) REED H12 HINGED CUTTER 8”- 12” (219mm - 356mm) REED

ROTARY CUTTERS - REED

Exclusive to REED, Rotary Cutters cut pipe safely, easily, quickly and at a low cost. Provides a square cut and can be used anywhere - in the ditch, underwater, in explosive atmospheres, cold cut in noise-free zones, over head, in racks of pipe… anywhere! REED Rotary Cutters last for decades.

Cuts: large diameter steel, most stainless steel, ductile and cast iron pipe in close quarters. The new low profile design needs only 4” clearance for up to 16” pipe diameter and requires only 45°- 60° handle swing.

Best manual cutters for ductile iron. With good leverage from long handle, pipe snaps off squarely before wheel penetrates halfway through pipe. Cutters have heavy-duty frames.

Rotary Cutters are available to suit iron or steel. Please specify when ordering.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


2.10 MANUAL CHAIN CUTTERS

PRODUCT CODE DESCRIPTIONSC49-6 RATCHET SOIL PIPE CUTTER 2” - 6” (50mm - 160mm) SC49-8 RATCHET SOIL PIPE CUTTER 2” - 8” (50mm - 212mm)

SC49-10 RATCHET SOIL PIPE CUTTER 2” - 10” (50mm - 268mm) SC49-12 RATCHET SOIL PIPE CUTTER 2” - 12” (50mm - 317mm)SC59-6 SINGLE STROKE PIPE CUTTER 2” - 6” (50mm - 160mm)SC59-8 SINGLE STROKE PIPE CUTTER 2” - 8” (50mm - 212mm)

SC59-10 SINGLE STROKE PIPE CUTTER 2” - 10” (50mm - 268mm)SC59-12 SINGLE STROKE PIPE CUTTER 2” - 12” (50mm - 317mm)SCEXT EXTENSION CHAIN (INCLUDES 4 LINKS)

SOIL PIPE CUTTERS - REED

The fastest way to cut cast iron soil pipe, clay pipe and small diameter concrete pipe is with a chain pipe cutter. Great for grey water applications! REED has improved the original manufacturers design by providing stronger jaws and more durable adjusting screws which are interchangeable with the original tools. The close quarter pipe cutters (SC49) are the easiest to use because the screw is captured and does not have to be manipulated into place. The SC49 models are supplied with an American-made, multiple use ratchet wrench. REED Soil Pipe Cutters are available in a single stroke model (SC59) and a ratcheting model (SC49) for close quarter work.

WHEELER-REX HYDRAULIC CUTTERS

Wheeler-Rex Hydraulic Chain Cutters are the solution to cutting larger diameter Cast Iron, Tile, and Concrete Pipe. Like the hand operated “snap” cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A minimum 50mm – 75mm clearance is all that is needed to wrap cutter chain around pipe in order to engage it in the cutter jaws. The unit comes complete with pump, hose and case.

2.11 HYDRAULIC CHAIN CUTTERS

PRODUCT CODE DESCRIPTIONLCRC8 LOW CLEARANCE ROTARY CUTTER 6” - 8” (159mm – 246mm)LCRC12 LOW CLEARANCE ROTARY CUTTER 10” – 14” (266mm – 358mm)LCRC16 LOW CLEARANCE ROTARY CUTTER 16” – 18” (368mm – 462mm)


PIPE WORKING TOOLS

16PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


2.10 MANUAL CHAIN CUTTERS

PRODUCT CODE DESCRIPTIONSC49-6 RATCHET SOIL PIPE CUTTER 2” - 6” (50mm - 160mm) SC49-8 RATCHET SOIL PIPE CUTTER 2” - 8” (50mm - 212mm)

SC49-10 RATCHET SOIL PIPE CUTTER 2” - 10” (50mm - 268mm) SC49-12 RATCHET SOIL PIPE CUTTER 2” - 12” (50mm - 317mm)SC59-6 SINGLE STROKE PIPE CUTTER 2” - 6” (50mm - 160mm)SC59-8 SINGLE STROKE PIPE CUTTER 2” - 8” (50mm - 212mm)

SC59-10 SINGLE STROKE PIPE CUTTER 2” - 10” (50mm - 268mm)SC59-12 SINGLE STROKE PIPE CUTTER 2” - 12” (50mm - 317mm)SCEXT EXTENSION CHAIN (INCLUDES 4 LINKS)

SOIL PIPE CUTTERS - REED

The fastest way to cut cast iron soil pipe, clay pipe and small diameter concrete pipe is with a chain pipe cutter. Great for grey water applications! REED has improved the original manufacturers design by providing stronger jaws and more durable adjusting screws which are interchangeable with the original tools. The close quarter pipe cutters (SC49) are the easiest to use because the screw is captured and does not have to be manipulated into place. The SC49 models are supplied with an American-made, multiple use ratchet wrench. REED Soil Pipe Cutters are available in a single stroke model (SC59) and a ratcheting model (SC49) for close quarter work.

WHEELER-REX HYDRAULIC CUTTERS

Wheeler-Rex Hydraulic Chain Cutters are the solution to cutting larger diameter Cast Iron, Tile, and Concrete Pipe. Like the hand operated “snap” cutters, hydraulic cutters are not rotated around pipe. Their remotely operated hydraulic pumps provide the required power. A minimum 50mm – 75mm clearance is all that is needed to wrap cutter chain around pipe in order to engage it in the cutter jaws. The unit comes complete with pump, hose and case.

2.11 HYDRAULIC CHAIN CUTTERS

PRODUCT CODE DESCRIPTIONLCRC8 LOW CLEARANCE ROTARY CUTTER 6” - 8” (159mm – 246mm)

LCRC12 LOW CLEARANCE ROTARY CUTTER 10” – 14” (266mm – 358mm)LCRC16 LOW CLEARANCE ROTARY CUTTER 16” – 18” (368mm – 462mm)


PIPE WORKING TOOLS

16PLUMBOSS

AUSTRALIA

17

PIPE

WOR

KING

TOOL

SPL

UMBO

SS -

AUST

RALI

A’SOW

NPL

UMBI

NGTO

OLSP

ECIA

LIST

S

2990 WHEELER PIPE CUTTER

The 2990 employs the “Squeeze and Pop” cutting principle with power supplied by a hydraulic pump. Because of the tool’s compact design and remotely operated pump, it is ideal for use in a ditch, on vertical piping or even overhead. Clean cuts are made in just seconds. Ideal for use by contracting firms or small municipalities where large diameter water main is not normally cut.

All models cut 2” - 6” (50 - 150mm) ASA class 22 Cast Iron Water Main, and 2” - 6” (50 - 150mm)Service Wt. or XH Soil Pipe in addition to the sizes and materials listed by each model.

PRODUCT CODE DESCRIPTION2990-6 HYDRAULIC PIPE CUTTER 2” - 6” WHEELER-REX

2990-8 HYDRAULIC PIPE CUTTER 2” - 8” WHEELER-REX

2990-10 HYDRAULIC PIPE CUTTER 2”- 10” WHEELER-REX

2990-12 HYDRAULIC PIPE CUTTER 2” - 12” WHEELER-REX 2990-15 HYDRAULIC PIPE CUTTER 2” - 15” WHEELER-REX

Wheeler#

Service(Std) WT Soil Pipe

XH Soil Pipe

Tile / Clay Cast Iron Water

Class 22

Cast Iron Water

Class 26

Weight

2990-6 2”–6” (50mm–150mm)

2”–6” (50mm–150mm)

2”–6” (50mm–150mm)

2”–6” (50mm–150mm)

N/A 85 lbs. (39kg)

2990-8 2”–8” (50mm–200mm)

2”–8” (50mm–200mm)

2”–8” (50mm–200mm)

2”–6” (50mm–150mm)

N/A 87 lbs. (40kg)

2990-10 2”–10” (50mm–250mm)

2”–8” (50mm–200mm)

2”–10” (50mm–250mm)

2”–6” (50mm–150mm)

N/A 89 lbs. (41kg)

2990-12 2”–10” (50mm–250mm)

2”–8” (50mm–200mm)

2”–12” (50mm–300mm)

2”–6” (50mm–150mm)

N/A 92 lbs. (42kg)

2990-15 2”–10” (50mm–250mm)

2”–8” (50mm–200mm)

2”–15” (50mm–375mm)

2”–6” (50mm–150mm)

N/A 94 lbs. (43kg)

2.11 HYDRAULIC CHAIN CUTTERSCONT

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


3890 WHEELER HEAVY DUTY HYDRAULIC PIPE CUTTER

The 3890 is easily carried and operated by one man. Cuts in a line and handled easily. All materials including tile and asbestos-cement pipe are cut with the same wheels. Cutter is not rotated around the pipe. The chain simply squeezes and pops off the desired length of pipe.

All models cut 4012 (100-300mm) ASA class 22 CI Water Main, 4”-10” (100-250mm)

ASA CLASS 26 Cast Iron Water Main, in addition to the sizes and materials listed by each model.

PRODUCT CODE DESCRIPTION3890-12 HYDRAULIC PIPE CUTTER 4”-12” WHEELER-REX 3890-15 HYDRAULIC PIPE CUTTER 4”-15” WHEELER-REX 3890-18 HYDRAULIC PIPE CUTTER 4”-18” WHEELER-REX 3890-24 HYDRAULIC PIPE CUTTER 4”-24” WHEELER-REX


Wheeler#


XH Soil Pipe

Tile andConcrete

Cast Iron Water

Class 22

Cast Iron Water

Class 26

Weight

3890-12 4”–12”(100mm– 300mm)

4”–12”(100mm– 300mm)

4”–12”(100mm– 300mm)

4”–12”(100mm– 300mm)

4”–10”(100mm– 250mm)

157 lbs. (72kg)

3890-15 4”–15”(100mm– 375mm)

4”–15”(100mm– 375mm)

4”–15”(100mm– 375mm)

4”–12”(100mm– 300mm)

4”–10”(100mm– 250mm)

163 lbs. (74kg)

3890-18 4”–18”(100mm– 450mm)

4”–18”(100mm– 450mm)

4”–18”(100mm– 450mm)

4”–12”(100mm– 300mm)

4”–10”(100mm– 250mm)

170 lbs. (77kg)

3890-24 4”–18”(100mm– 450mm)

4”–18”(100mm– 450mm)

4”–24”(100mm– 600mm)

4”–12”(100mm– 300mm)

4”–10”(100mm– 250mm)

178 lbs. (88kg)

PIPE WORKING TOOLS

18PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


3890 WHEELER HEAVY DUTY HYDRAULIC PIPE CUTTER

The 3890 is easily carried and operated by one man. Cuts in a line and handled easily. All materials including tile and asbestos-cement pipe are cut with the same wheels. Cutter is not rotated around the pipe. The chain simply squeezes and pops off the desired length of pipe.

All models cut 4012 (100-300mm) ASA class 22 CI Water Main, 4”-10” (100-250mm)

ASA CLASS 26 Cast Iron Water Main, in addition to the sizes and materials listed by each model.

PRODUCT CODE DESCRIPTION3890-12 HYDRAULIC PIPE CUTTER 4”-12” WHEELER-REX 3890-15 HYDRAULIC PIPE CUTTER 4”-15” WHEELER-REX 3890-18 HYDRAULIC PIPE CUTTER 4”-18” WHEELER-REX 3890-24 HYDRAULIC PIPE CUTTER 4”-24” WHEELER-REX


Wheeler#


XH Soil Pipe

Tile andConcrete

Cast Iron Water

Class 22

Cast Iron Water

Class 26

Weight

3890-12 4”–12”(100mm– 300mm)

4”–12”(100mm– 300mm)

4”–12”(100mm– 300mm)

4”–12”(100mm– 300mm)

4”–10”(100mm– 250mm)

157 lbs. (72kg)

3890-15 4”–15”(100mm– 375mm)

4”–15”(100mm– 375mm)

4”–15”(100mm– 375mm)

4”–12”(100mm– 300mm)

4”–10”(100mm– 250mm)

163 lbs. (74kg)

3890-18 4”–18”(100mm– 450mm)

4”–18”(100mm– 450mm)

4”–18”(100mm– 450mm)

4”–12”(100mm– 300mm)

4”–10”(100mm– 250mm)

170 lbs. (77kg)

3890-24 4”–18”(100mm– 450mm)

4”–18”(100mm– 450mm)

4”–24”(100mm– 600mm)

4”–12”(100mm– 300mm)

4”–10”(100mm– 250mm)

178 lbs. (88kg)

PIPE WORKING TOOLS

18PLUMBOSS

AUSTRALIA

19

PIPE

WOR

KING

TOOL

SAU

STRA

LIA’S

TRUS

TED

PLUM

BING

TOOL

BRAN

D

5590 WHEELER SUPER HYDRAULIC PIPE CUTTER

A powerful, remotely operated hydraulic ram and heavy duty, forged steel jaws utilize the “squeeze and pop” cutting principle. All you need is sufficient clearance to wrap the chain around the pipe and engage it in the cutter jaws.

All models cut 6”-18” (150-450mm) ASA class 26 Cast Iron Water Main, in addition to the following sizes and materials listed by each model.

PRODUCT CODE DESCRIPTION5590-18 HYDRAULIC PIPE CUTTER 6”- 18” WHEELER-REX 5590-20 HYDRAULIC PIPE CUTTER 6”- 20” WHEELER-REX 5590-24 HYDRAULIC PIPE CUTTER 6”- 24” WHEELER-REX 5590-36 HYDRAULIC PIPE CUTTER 6”- 36” WHEELER-REX


Wheeler#


XH Soil Pipe

Tile andConcrete

Cast Iron Water

Class 22

Cast Iron Water

Class 26

Weight

5590-18 6”–18”(150mm– 450mm)

6”–18”(150mm– 450mm)

6”–18”(150mm– 450mm)

6”–18”(150mm– 450mm)

6”–18” (150mm–450mm)

200 lbs. (91kg)

5590-20 6”–18”(150mm– 450mm)

6”–18”(150mm– 450mm)

6”–20”(150mm– 500mm)

6”–20”(150mm– 500mm)

6”–18” (150mm–450mm)

213 lbs. (97kg)

5590-24 6”–18”(150mm– 450mm)

6”–18”(150mm– 450mm)

6”–24”(150mm– 600mm)

6”–20”(150mm– 500mm)

6”–18” (150mm–450mm)

230 lbs. (105kg)

5590-36 6”–18”(150mm– 450mm)

6”–18”(150mm– 450mm)

6”–36”(150mm– 900mm)

6”–20”(150mm– 500mm)

6”–18” (150mm–450mm)

269 lbs. (122kg)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Features:

HYDRAULIC REQUIREMENTS: 22L/m at 1500psi (105.5kg/cm²) BLADE SPEED: 1200rpm

Standard Accessories:

Cutter Head�

Roller Chain�

6 Wedges�

Tool Kit�

Storage case�

1/2” Hydraulic connectors�

18L Portable Water Tank�

Hydraulic Power Pack

6.5HP Honda Engine�

2x 6.5m hoses with Quick Connectors�

18L/m�

1500psi�

Number of chain links required:

HYDRAULIC PIPE CUTTER AND POWER PACK

The ‘Pipe Master’ consists of a cutting head with internal gears which operate the drive wheels and blade shaft. Cutting blades (except for No. 4616) must be cooled with water during cutting and are fully enclosed for safety. The cutter is held onto the pipe by a wide roller chain which is tensioned with a threaded take-up mechanism. A chart is included which tells the operator how much chain is required for various sizes of pipe. The unit has a hydraulic motor which requires an external hydraulic power source.

The Pipe Master can be purchased with the ‘Hydraulic Power Pack’ as an optional extra.

PIPE DIAMETER 18” (450mm) 25” (700mm) 40” (1000mm) 54” (1350mm)

NUMBER OF LINKS 21 pieces 34 pieces 51 pieces 71 pieces

PRODUCT CODE DESCRIPTION4624 PIPE MASTER 6” – 24” (150mm-600mm) 45kg4648 PIPE MASTER 6” – 48” (150mm-1200mm) 51kg

BLADES TO SUIT PIPE MASTER4606 6” DIAMOND BLADE FOR CAST IRON AND DUCTILE IRON4616 6” ECONOMY DIAMOND BLADE FOR DUCTILE IRON4706 6” CARBIDE-TIPPED BLADE FOR STEEL PIPE

ACCESSORIES6500 HYDRAULIC POWER PACK4686 EXTRA ROLLER CHAIN LINK SECTION

2.12 HYDRAULIC PIPE CUTTER & POWER PACK

PIPE WORKING TOOLS

20PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Features:

HYDRAULIC REQUIREMENTS: 22L/m at 1500psi (105.5kg/cm²) BLADE SPEED: 1200rpm

Standard Accessories:

Cutter Head�

Roller Chain�

6 Wedges�

Tool Kit�

Storage case�

1/2” Hydraulic connectors�

18L Portable Water Tank�

Hydraulic Power Pack

6.5HP Honda Engine�

2x 6.5m hoses with Quick Connectors�

18L/m�

1500psi�

Number of chain links required:

HYDRAULIC PIPE CUTTER AND POWER PACK

The ‘Pipe Master’ consists of a cutting head with internal gears which operate the drive wheels and blade shaft. Cutting blades (except for No. 4616) must be cooled with water during cutting and are fully enclosed for safety. The cutter is held onto the pipe by a wide roller chain which is tensioned with a threaded take-up mechanism. A chart is included which tells the operator how much chain is required for various sizes of pipe. The unit has a hydraulic motor which requires an external hydraulic power source.

The Pipe Master can be purchased with the ‘Hydraulic Power Pack’ as an optional extra.

PIPE DIAMETER 18” (450mm) 25” (700mm) 40” (1000mm) 54” (1350mm)

NUMBER OF LINKS 21 pieces 34 pieces 51 pieces 71 pieces

PRODUCT CODE DESCRIPTION4624 PIPE MASTER 6” – 24” (150mm-600mm) 45kg4648 PIPE MASTER 6” – 48” (150mm-1200mm) 51kg

BLADES TO SUIT PIPE MASTER4606 6” DIAMOND BLADE FOR CAST IRON AND DUCTILE IRON4616 6” ECONOMY DIAMOND BLADE FOR DUCTILE IRON4706 6” CARBIDE-TIPPED BLADE FOR STEEL PIPE

ACCESSORIES6500 HYDRAULIC POWER PACK4686 EXTRA ROLLER CHAIN LINK SECTION

2.12 HYDRAULIC PIPE CUTTER & POWER PACK

PIPE WORKING TOOLS

20PLUMBOSS

AUSTRALIA

21

PIPE

WOR

KING

TOOL

STH

ETU

BE &

PIP

ETO

OLSP

ECIA

LIST

S

2.13 UNIVERSAL PIPE CUTTER

PNEUMATIC PIPE CUTTERS 6”- 48” (150mm-1300mm) REED

The UPC is light weight and cuts fast �

Requires only 12” (300mm) clearance around pipe �

Provides a square cut virtually every time �

Can be operated underwater �

It is by far the safest, easiest and fastest �power cutter to set-up, operate and maintain Very low operating cost �

PIPE MATERIAL UPC 616A, 636A and 648A (PNEUMATIC)

Cast Iron, Pit Cast, Ductile Iron, Clay,

Concrete

4” BLADECut up to 18.3mm

wall thickness

6” BLADECut up to 43.7mm

wall thicknessUPDIA4C UPDIA6C

PVC UPCARB4 UPCARB6

PRODUCT CODE DESCRIPTIONUPC616A UNIVERSAL PIPE CUTTER 6”- 16” PNEUMATIC UPC636A UNIVERSAL PIPE CUTTER 6”- 36” PNEUMATIC UPC648A UNIVERSAL PIPE CUTTER 6”- 48” PNEUMATIC

BLADESBLADES ARE SOLD SEPARATELY

UPDIA4C 4” DIAMOND BLADE (NOT FOR PVC)UPDIA6C 6” DIAMOND BLADE (NOT FOR PVC)UPCARB4 4” PVC BLADEUPCARB6 6” PVC BLADE

These light weight, easy-to-use pipe cutters are now available to cut 6”- 48” (150mm - 1300mm) O.D ductile iron, cast iron, clay, concrete, PVC or PE pipe. They are a pneumatic powered cutter. The UPC616 units cover the 6”-16” pipe range. These lower costing 616’s use the same motor as the 636 and the 648, but do not need connecting frames. The UPC616 is shipped in a light weight plastic box, with a three gallon water tank. The UPC636 and UPC648 come in a steel toolbox with a seven gallon, stainless steel water tank and cart.

PE and bevel blades available by special order. Min order applies.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


2.14 PCS8+ PIPE CUTTING SYSTEM

The T-Drill PCS 8+ is the complete package that makes pipe cutting fast, safe and easy. It is portable, versatile and easy to operate. With the PCS8+ there are no more rough, inexact cuts – just fast square cuts in a wide variety of materials.

LEAVES STRAIGHT CUT EDGESDuring pipe cutting, the T-Drill PCS8 fits firmly on the pipe and the saw blade is always in the correct position, leaving no need for steering.

USER BENEFITSLight weight, ergonomic and safe�

Safe to use in confined spaces�

Sparks and dust are kept to minimum�

Chips caused by pipe cutting cool down �quickly, and fall very close to the cutting site

therefore reducing the risk of fire and damageCuts at ground level which means there �is no need for lifting pipes for cuttingCuts 15mm – 200mm diameter pipe. The �maximum wall thickness of the tube to be cut is 8mm with steel and 12mm with plastics.Cuts steel, stainless steel, cast iron, �

copper, aluminium and plastic

PACKAGE CONTENTS:T-Drill PCS 8+ pipe cutting system caseT-Drill PCS 8+ pipe cutterT-Drill pipe holder setT-Drill TCT bladeT-Drill CERMET bladeProtective glassesEar ProtectorsBlade KeyOperating Instructions

PRODUCT CODE DESCRIPTIONTD5900201 PCS8+ PIPE CUTTING MACHINE

TD-P7010486 TCT BLADETD-P7010496 CERMET BLADETD-P7010491 DIAMOND BLADE

PIPE WORKING TOOLS

22PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


2.14 PCS8+ PIPE CUTTING SYSTEM

The T-Drill PCS 8+ is the complete package that makes pipe cutting fast, safe and easy. It is portable, versatile and easy to operate. With the PCS8+ there are no more rough, inexact cuts – just fast square cuts in a wide variety of materials.

LEAVES STRAIGHT CUT EDGESDuring pipe cutting, the T-Drill PCS8 fits firmly on the pipe and the saw blade is always in the correct position, leaving no need for steering.

USER BENEFITSLight weight, ergonomic and safe�

Safe to use in confined spaces�

Sparks and dust are kept to minimum�

Chips caused by pipe cutting cool down �quickly, and fall very close to the cutting site

therefore reducing the risk of fire and damageCuts at ground level which means there �is no need for lifting pipes for cuttingCuts 15mm – 200mm diameter pipe. The �maximum wall thickness of the tube to be cut is 8mm with steel and 12mm with plastics.Cuts steel, stainless steel, cast iron, �

copper, aluminium and plastic

PACKAGE CONTENTS:T-Drill PCS 8+ pipe cutting system caseT-Drill PCS 8+ pipe cutterT-Drill pipe holder setT-Drill TCT bladeT-Drill CERMET bladeProtective glassesEar ProtectorsBlade KeyOperating Instructions

PRODUCT CODE DESCRIPTIONTD5900201 PCS8+ PIPE CUTTING MACHINE

TD-P7010486 TCT BLADETD-P7010496 CERMET BLADETD-P7010491 DIAMOND BLADE

PIPE WORKING TOOLS

22PLUMBOSS

AUSTRALIA

23

PIPE

WOR

KING

TOOL

SIM

PORT

ERS

& MA

NUFA

CTUR

ERS

OFPL

UMBI

NGEQ

UIPM

ENT

2.15 BAND SAW

The MANTIS 180WS can cut up to 180mm round pipe and 150mm square pipe at 90˚. The MANTIS 180WA can cut up to 180mm round pipe and 150mm square pipe at 90˚ and up to 80mm round pipe and 80mm square pipe at 45˚. With a 24-Tooth HSS blade it can cut thin-walled stainless steel with ease. It features:

SAFETY – Motor equipped with protective �function against overload to prevent burning. Motor stops automatically after cutting.EASY OPERATION - Handle, knob and �switch are located at front for easy operation. These machines are also easy to move as it is equipped with large wheels.CONTOUR CUTTING – Great for �cutting angels on square pipesLARGE BEARINGS – improves �the durability of the machineSPARE BLADE STORAGE – the cover �is designed to house a spare bladeQUICK AND EASY VICE CHANGE �– just three bolts is all it takesSUPPLIED WITH 14-TOOTH HSS Blade�

PRODUCT CODE DESCRIPTIONRX4751S1 MANTIS 180WS (CHAIN VICE)RX4751A1 MANTIS 180WA (FLAT VICE)RX475190 CHAIN VICE UNITRX475192 FLAT VICE UNIT

BLADESRX475200 8 TPI ALLOY BLADERX475201 10 TPI ALLOY BLADERX475202 14 TPI ALLOY BLADERX475203 18 TPI ALLOY BLADERX475204 24 TPI ALLOY BLADERX475210 10 TPI HSS BLADERX475211 14 TPI HSS BLADERX475212 18 TPI HSS BLADERX475213 24 TPI HSS BLADERX475220 GRIT SAW

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


2.16 DM2100BSPT DRILLING MACHINES

Drilling machines cut or drill through the pipe wall via the corporation stop inserted into the service saddle while under pressure. They use REED D Series drills or hole saws. The descriptions and table below show which drill or hole saw will be best suited for your job.

PVC SHELL CUTTERS: PVC shells cut through service saddles on PVC ONLY.

D SERIES DRILL BITS: These spiral drills are made from strong, high speed steel, are treated for longer life, are black oxide coated for corrosion resistance and are much easier cutting than other drills as the spiral motion clears chips away from cut. Recommended for cast iron, ductile iron and cement lined ductile iron.

CARBIDE TIPPED HOLE SAWS: Carbide tipped hole saws are used with a hole saw adaptor. They are black oxide coated for corrosion resistance. Recommended for cast iron, ductile iron and cement lined ductile iron.

HEAVY DUTY CARBIDE TIPPED HOLE SAWS: These saws provide more taps into mains than standard hole saws. The thicker walls, bigger carbides and high temperature brazing help this heavy duty hole saw withstand many cuts. These hole saws have a large slot for easy coupon removal. Heavy duty hole saws are the best choice for cutting cast iron, ductile iron and cement lined ductile iron.

PIPE WORKING TOOLS

24PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


2.16 DM2100BSPT DRILLING MACHINES

Drilling machines cut or drill through the pipe wall via the corporation stop inserted into the service saddle while under pressure. They use REED D Series drills or hole saws. The descriptions and table below show which drill or hole saw will be best suited for your job.

PVC SHELL CUTTERS: PVC shells cut through service saddles on PVC ONLY.

D SERIES DRILL BITS: These spiral drills are made from strong, high speed steel, are treated for longer life, are black oxide coated for corrosion resistance and are much easier cutting than other drills as the spiral motion clears chips away from cut. Recommended for cast iron, ductile iron and cement lined ductile iron.



PIPE WORKING TOOLS

24PLUMBOSS

AUSTRALIA

25

PIPE

WOR

KING

TOOL

SPL

UMBO

SSSU

PPLY

PLUM

BING

,IND

USTR

IAL,

ELEC

TRIC

AL &

REF

RIGE

RATI

ONEQ

UIPM

ENT

2.17 PIPE JOINERS

2.16 DM2100BSPT DRILLING MACHINESCONT

MULTI PURPOSE PIPE JOINER — REED

PJ414 Allows a basic, lever and chain approach to joining medium and large gasketed pipe and fittings up to 14” size, including PVC, ductile iron, clay tile, cast iron, soil pipe, concrete water and sewer pipe. (Double wrap chain around PVC for best grip and use two PJ414’s for the heavier pipe) Quarter-inch proof coil chain is rated at 725kg. Two 12’ (approx 3.7m) lengths of chain plus an extendable handle allow for a variety of applications.

PRODUCT CODE DESCRIPTION NOM CORP. SIZE IN

DRILLING MACHINEDM2100BSPT 3/4” – 2” DRILLING MACHINE

PVC PIPE DRILLINGPL688 11/16” PVC SHELL CUTTER 3/4”PL875 7/8” PVC SHELL CUTTER 1”

PL1438 1 7/16” PVC SHELL CUTTER 1 ½”PL1750 1 3/4” PVC SHELL CUTTER 2”

SMALL DIAMETER DRILLINGD438 7/16” D SERIES DRILL BIT 1/2”D688 11/16” D SERIES DRILL BIT 3/4”D875 7/8” D SERIES DRILL BIT 1”D938 15/16” D SERIES DRILL BIT 1”

LIGHT DUTY DRILLINGHS1438 1 7/16” CARBIDE TIPPED HOLE SAW 1 ½”HS1750 1 3/4” CARBIDE TIPPED HOLE SAW 2”HS1875 1 7/8” CARBIDE TIPPED HOLE SAW 2”

HEAVY DUTY DRILLINGHDHS1438 1 7/16” HEAVY DUTY CARBIDE TIPPED HOLE SAW 1 ½”HDHS1750 1 3/4” HEAVY DUTY CARBIDE TIPPED HOLE SAW 2”HDHS1875 1 7/8” HEAVY DUTY CARBIDE TIPPED HOLE SAW 2”

HOLE SAW ADAPTOR08413 HOLE SAW ADAPTOR FOR CARBIDE TIPPED AND HEAVY DUTY CARBIDE TIPPED

HOLE SAWS



NOTE: NOT FOR USE WITH SOLVENT CEMENT JOINING OF PLASTIC PIPE

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


2.18 PIPE LOCATORS

PLUMBERS PROBE (NON INSULATED) - for locating underground plumbing services — 1200mm long

INSULATED MIGHTY PROBE - provides protection against electrical shock resulting from accidental contact with energized lines when correctly used under proper conditions. It is certified to 50,000 volts. Available sizes are 1200mm, 1350mm, 1800mm long. The mighty probe is also available as a hexagonal shape probe.Slide adaptors can be ordered for easier hammering.

MPSA

MIGHTY PROBE

PLUMBERSPROBE

PLASTIC PIPE JOINER — REED

PPJ and PPJVS combined has a 28:1 leverage, making it easy for one person to join PVC or PE pipe up to 16” gasketed or up to 12” solvent cement joints. It can connect and separate 4” - 16” gasketed pipe and 4” - 12” for solvent cement connections.

*Maximum pipe diameter is 12” (324mm) when joining or separating solvent cement connections.

PRODUCT CODE DESCRIPTIONPJ414 MULTI PURPOSE PIPE JOINER 4” - 14” (102mm-355mm) REED PPJ PLASTIC PIPE JOINER REED

PPJVS V SADDLES 4” – 16” (114mm-434mm*) cap. REED

2.17 PIPE JOINERSCONT

PIPE WORKING TOOLS

26PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


2.18 PIPE LOCATORS

PLUMBERS PROBE (NON INSULATED) - for locating underground plumbing services — 1200mm long

INSULATED MIGHTY PROBE - provides protection against electrical shock resulting from accidental contact with energized lines when correctly used under proper conditions. It is certified to 50,000 volts. Available sizes are 1200mm, 1350mm, 1800mm long. The mighty probe is also available as a hexagonal shape probe.Slide adaptors can be ordered for easier hammering.

MPSA

MIGHTY PROBE

PLUMBERSPROBE

PLASTIC PIPE JOINER — REED

PPJ and PPJVS combined has a 28:1 leverage, making it easy for one person to join PVC or PE pipe up to 16” gasketed or up to 12” solvent cement joints. It can connect and separate 4” - 16” gasketed pipe and 4” - 12” for solvent cement connections.


PRODUCT CODE DESCRIPTIONPJ414 MULTI PURPOSE PIPE JOINER 4” - 14” (102mm-355mm) REED PPJ PLASTIC PIPE JOINER REED

PPJVS V SADDLES 4” – 16” (114mm-434mm*) cap. REED

2.17 PIPE JOINERSCONT

PIPE WORKING TOOLS

26PLUMBOSS

AUSTRALIA

27

PIPE

WOR

KING

TOOL

SSE

RVIN

GAU

STRA

LIA’S

TRAD

ESME

NSI

NCE

1986

2.18 PIPE LOCATORSCONT

A range of sonar and other electric pipe locators are also available. Please enquire.

PRODUCT CODE DESCRIPTIONPP1200 PLUMBERS PROBE 1200mm MP1200 INSULATED MIGHTY PROBE 1200mm MP1350 INSULATED MIGHTY PROBE 1350mmMP1800 INSULATED MIGHTY PROBE 1800mm

MPHX1200 INSULATED HEX MIGHTY PROBE 1200mmMPTIP MIGHTY PROBE REPLACEMENT TIPMPSA MIGHTY PROBE SLIDE ADAPTOR

2.19 FOG GENERATOR

Fog generators are used for detecting stormwater infiltration to sewage lines. They are a useful way to find where the line has been affected without spending long valuable hours doing so. Plumboss have a range of Fog Generators and Blowers available for all sewer line smoke testing applications. Please feel free to enquire about our range of Fog generators so that we may locate the machine that will suit your needs best.

PRODUCT CODE DESCRIPTIONZR5L 5L FOG LIQUIDZR33 FOG GENERATING MACHINE


SONAR & ELECTRIC PIPE LOCATORS

PlumBOSS offer a range of different sonar and electric pipe locators to suit your needs, To find out which locator is best for you contact our sales staff today.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


PRODUCT CODE DESCRIPTION1300 PIPE DESCALER 3” - 12” cap. WHEELER-REX 45” 1301 REPLACEMENT DESCALER BELT 45” WHEELER-REX 1350 PIPE DESCALER 12” - 36” cap. WHEELER-REX 72”1351 REPLACEMENT DESCALER BELT 72” WHEELER-REX

REED PIPE DESCALERSThe scrapers on the REED Pipe Descalers remove corrosion and other obstructions from the pipe surface to allow more effective cutting, joining, gasket seating, or other operations. It is much faster and more effective than chisels or files and requires only a few inches clearance around the pipe. The tool is made entirely of steel that is zinc plated for corrosion resistance and toughness.

PRODUCT CODE DESCRIPTIONDS12 PIPE DESCALER 3” - 12” cap. REED DS36 PIPE DESCALER 3” - 36” cap. REED

2.20 PIPE DESCALERS

WHEELER-REX PIPE DESCALERSThis is a versatile scraper for removing mud and scale from pipe surfaces, which makes for faster cutting and better repairs and joints. Belt material is light, strong and non- corroding. Angled blades promote self-cleaning. Belt is replaceable. Longer length reduces back strain.

PIPE WORKING TOOLS

28PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


PRODUCT CODE DESCRIPTION1300 PIPE DESCALER 3” - 12” cap. WHEELER-REX 45” 1301 REPLACEMENT DESCALER BELT 45” WHEELER-REX 1350 PIPE DESCALER 12” - 36” cap. WHEELER-REX 72”1351 REPLACEMENT DESCALER BELT 72” WHEELER-REX

REED PIPE DESCALERSThe scrapers on the REED Pipe Descalers remove corrosion and other obstructions from the pipe surface to allow more effective cutting, joining, gasket seating, or other operations. It is much faster and more effective than chisels or files and requires only a few inches clearance around the pipe. The tool is made entirely of steel that is zinc plated for corrosion resistance and toughness.

PRODUCT CODE DESCRIPTIONDS12 PIPE DESCALER 3” - 12” cap. REED DS36 PIPE DESCALER 3” - 36” cap. REED

2.20 PIPE DESCALERS

WHEELER-REX PIPE DESCALERSThis is a versatile scraper for removing mud and scale from pipe surfaces, which makes for faster cutting and better repairs and joints. Belt material is light, strong and non- corroding. Angled blades promote self-cleaning. Belt is replaceable. Longer length reduces back strain.

PIPE WORKING TOOLS

28PLUMBOSS

AUSTRALIA

29

PIPE

WOR

KING

TOOL

SPL

UMBO

SS -

AUST

RALI

A’SOW

NPL

UMBI

NGTO

OLSP

ECIA

LIST

S

2.21 PIPE FREEZING EQUIPMENT

PRODUCT CODE DESCRIPTIONARCO3 ARCTIC SPRAY PIPE FREEZING KIT AC500 ARCTIC SPRAY CAN 500g

AVERAGE TIME TAKEN TO FREEZE PIPES WITH JETFREEZERPipe Diameter

Jetfreezerjacket

15mm½”

20mm¾”

25mm1”

40mm1 ½”

50mm2”

65mm2 ½”

75mm3”

90mm3 ½”

100mm4”

Mini jacket 3.5min

22mm 10min

42mm 16min 27min

80mm 35min 50min 77min

100mm 120min 120min

Approx. CO2 consumption

0.3kg 1kg 1.25kg 1.5kg 4.1kg 6.4kg 10kg 12.7kg 16.3kg

ARCTIC SPRAY KIT

Includes:1 Aerosol Can Arctic Spray 2 Jackets for Pipes up to 1” diameter

Forms a safe temporary ice plug which lasts up to 35 minutes. No need to switch off mains or drain down pipe work system for repairs, alterations or maintenance. The advantage of the Arctic Spray Kit is that it will not damage pipes or joints. Spare aerosol cans available.

JETFREEZER PORTABLE PIPE FREEZING EQUIPMENT

By using the intensely cold properties of carbon dioxide, Jetfreezer creates a temporary ice plug in a small section of the pipe. This quickly and economically isolates the area to work on. Jetfreezer will freeze metal and plastic pipes from 15mm to 100mm diameter containing water, heavy fuel oils, brine, alcohol solutions and many other liquids!

HOW IT WORKS:The jacket is wrapped around the pipe to be frozen and then connected by the hose to the CO2 cylinder. When the cylinder valve is opened, liquid CO2 is discharged through the special jet in the jacket and forms solid CO2 or dry ice

Times shown are a guide only. Freezing times will differ depending of pipe, ambient temperature and liquid inside pipe.

There is a range of five jackets to suit all pipe sizes up to 4” (100mm) together with protective gloves, high pressure hose and tee- piece. Jackets can be supplied separately or as a pack.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


PIPE WORKING TOOLS

30

2.21 PIPE FREEZING EQUIPMENTCONT

PRODUCTCODE

DESCRIPTION

JFHCA HOSE COUPLING ADAPTOR JETFREEZER (TO JOIN TWO HOSES)JFW14 WASHER 1/4” JETFREEZER JFH24 HOSE 2.4m 1/4” BSPTJFJ15 MINI JACKET 15mm JETFREEZERJFJ22 JACKET 22mm JETFREEZERJFJ42 JACKET 42mm JETFREEZERJFJ80 JACKET 80mm JETFREEZER

JFJ100 JACKET 100mm JETFREEZER JFG PROTECTIVE GLOVES JETFREEZERJFT T - PIECE JETFREEZER

JFPACK15 15mm JETFREEZER PACK (MINI JACKET, HOSE AND TWO JETFREEZER WASHERS)JFPACK22 22mm JETFREEZER PACK (22mm JACKET, HOSE AND TWO

JETFREEZER WASHERS)JFPACK42 42mm JETFREEZER PACK (42mm JACKET, HOSE AND TWO

JETFREEZER WASHERS)JFPACK80 80mm JETFREEZER PACK 80mm JACKET, 2x HOSE, 5x JETFREEZER

WASHERS AND TEE PCE)JFPACK100 100mm JETFREEZER PACK

(100mm JACKET, 2x HOSE, 5x JETFREEZER WASHERS AND TEE PCE)

JFJ80 AND JFJ100 HAVE TWO CONNECTIONS AND NEED A TEE PIECE, ADDITIONAL HOSES AND WASHERS. THESE CAN BE PURCHASED AS A PACK WITH REQUIRED FITTINGS INCLUDED.

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


PIPE WORKING TOOLS

30

2.21 PIPE FREEZING EQUIPMENTCONT

PRODUCTCODE

DESCRIPTION

JFHCA HOSE COUPLING ADAPTOR JETFREEZER (TO JOIN TWO HOSES)JFW14 WASHER 1/4” JETFREEZER JFH24 HOSE 2.4m 1/4” BSPTJFJ15 MINI JACKET 15mm JETFREEZERJFJ22 JACKET 22mm JETFREEZERJFJ42 JACKET 42mm JETFREEZERJFJ80 JACKET 80mm JETFREEZER

JFJ100 JACKET 100mm JETFREEZER JFG PROTECTIVE GLOVES JETFREEZERJFT T - PIECE JETFREEZER

JFPACK15 15mm JETFREEZER PACK (MINI JACKET, HOSE AND TWO JETFREEZER WASHERS)JFPACK22 22mm JETFREEZER PACK (22mm JACKET, HOSE AND TWO

JETFREEZER WASHERS)JFPACK42 42mm JETFREEZER PACK (42mm JACKET, HOSE AND TWO

JETFREEZER WASHERS)JFPACK80 80mm JETFREEZER PACK 80mm JACKET, 2x HOSE, 5x JETFREEZER

WASHERS AND TEE PCE)JFPACK100 100mm JETFREEZER PACK

(100mm JACKET, 2x HOSE, 5x JETFREEZER WASHERS AND TEE PCE)

JFJ80 AND JFJ100 HAVE TWO CONNECTIONS AND NEED A TEE PIECE, ADDITIONAL HOSES AND WASHERS. THESE CAN BE PURCHASED AS A PACK WITH REQUIRED FITTINGS INCLUDED.

PLUMBOSSAUSTRALIA

31

PIPE

WOR

KING

TOOL

STH

ETU

BE &

PIP

ETO

OLSP

ECIA

LIST

S

2.22 MANHOLE LID LIFTERS/WATER KEYS

PRODUCT CODE DESCRIPTIONGLSD1 STANDARD ‘D’ HANDLE LID LIFTER GLL2 LONG HANDLE LID LIFTERGLKIT LID LIFTER KIT

GLKIT-B LID LIFTER KIT (W/OUT 2x GLSD1)LT3 ‘T’ LID LIFTER

TPK01 TELSTRA PIT KEYPATHK PATH KEY (water turn cock key)SVK02 SLUICE VALVE KEY 1 ¼” SQUARE

SVE600 600mm EXTENSION TO SUIT 1 ¼” SQUARE SLUICE VALVESVE900 900mm EXTENSION TO SUIT 1 ¼” SQUARE SLUICE VALVE

SVE1200 1200mm EXTENSION TO SUIT 1 ¼” SQUARE SLUICE VALVESVE1500 1500mm EXTENSION TO SUIT 1 ¼” SQUARE SLUICE VALVESVE2000 2000mm EXTENSION TO SUIT 1 ¼” SQUARE SLUICE VALVEWK400 400mm WATER KEYWK900 900mm WATER KEY

For lifting Gatic style lids

LID LIFTER KITS:GLKIT- 2x ‘D’ HANDLE 2x LONG HANDLE LID LIFTER 2x ROLLER PIPES 1x SCRAPER KNIFE 1x CARRY BAG

GLKIT-B2x LONG HANDLE LID LIFTER2x ROLLER PIPES1x SCRAPER KNIFE1x CARRY BAG

LID LIFTERS WATER KEYS

GLKIT

‘D’ HANDLE LID LIFTER

LONG HANDLE LID LIFTER

TELSTRA PIT KEY SLUICE VALVE KEY EXTENSION

SLUICE VALVE KEY

PATH KEY

WATER KEY‘T’ LID LIFTER

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


3threading & grooving equipment

3.1 HAND PIPE THREADERS 2

3.2 POWER OPERATED THREADERS 6

3.3 POWER OPERATED ROLL GROOVERS 11

3.4 HAND OPERATED ROLL GROOVERS 13

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


3.1 HAND PIPE THREADERS

PRODUCT CODE DESCRIPTIONSD81- 4B ADJUSTABLE GUIDE THREADER SET 1/2”, 3/4”& 1” (2”X2” DIES) SD82- 4B ADJUSTABLE GUIDE THREADER SET 1/2”, 3/4”, 1” & 1 1/4” (2 ½” X 2 ½” DIES) SD84- 4B ADJUSTABLE GUIDE THREADER SET 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2” (4”X4” DIES)

SOLID DIE, ADJUSTABLE GUIDE THREADER SET - REED

The REED adjustable guide makes these the most economical, most convenient, and most versatile threader sets on the market. Because the guide adjusts to different sizes of pipe, it is only necessary to have a die for each pipe size, not a die and head. Other threader sets which require a die and a head for each size typically weigh over 25% more and take up considerably more room in the tool box or truck. Further, with two pawls, handle swing is faster -half that of one pawl competitive sets, and the best for close quarter work. Adjusting guides easily fit over coated pipe. These sets use the REED solid die: the easiest starting, easiest cutting and the most precise threading of any die. One die threads both stainless steel and carbon steel.

25% easier to use because �

two chasers cut while the other two guide the thread

25% lighter because REED �

does not need a separate head for each size

THREADING & GROOVING EQUIPMENT2

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


3.1 HAND PIPE THREADERS

PRODUCT CODE DESCRIPTIONSD81- 4B ADJUSTABLE GUIDE THREADER SET 1/2”, 3/4”& 1” (2”X2” DIES) SD82- 4B ADJUSTABLE GUIDE THREADER SET 1/2”, 3/4”, 1” & 1 1/4” (2 ½” X 2 ½” DIES) SD84- 4B ADJUSTABLE GUIDE THREADER SET 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2” (4”X4” DIES)

SOLID DIE, ADJUSTABLE GUIDE THREADER SET - REED

The REED adjustable guide makes these the most economical, most convenient, and most versatile threader sets on the market. Because the guide adjusts to different sizes of pipe, it is only necessary to have a die for each pipe size, not a die and head. Other threader sets which require a die and a head for each size typically weigh over 25% more and take up considerably more room in the tool box or truck. Further, with two pawls, handle swing is faster -half that of one pawl competitive sets, and the best for close quarter work. Adjusting guides easily fit over coated pipe. These sets use the REED solid die: the easiest starting, easiest cutting and the most precise threading of any die. One die threads both stainless steel and carbon steel.

25% easier to use because �

two chasers cut while the other two guide the thread

25% lighter because REED �

does not need a separate head for each size


PLUMBOSS AUSTRALIA

PRODUCT CODE DESCRIPTIONBLOCK DIES 2” X 2” – SUIT SD81 SERIES

0SB1/8 SOLID BLOCK DIE 1/8” (3mm) BSPT REED 0SB1/4 SOLID BLOCK DIE 1/4” (6mm) BSPT REED0SB3/8 SOLID BLOCK DIE 3/8” (10mm) BSPT REED0SB1/2 SOLID BLOCK DIE 1/2” (12mm) BSPT REED0SB3/4 SOLID BLOCK DIE 3/4” (19mm) BSPT REED0SB1 SOLID BLOCK DIE 1” (25mm) BSPT REED

BLOCK DIES 2 1/2” X 2 1/2” - SUIT SD82 SERIES1SB1/8 SOLID BLOCK DIE 1/8” (3mm) BSPT REED1SB1/4 SOLID BLOCK DIE 1/4” (6mm) BSPT REED1SB3/8 SOLID BLOCK DIE 3/8” (10mm) BSPT REED1SB1/2 SOLID BLOCK DIE 1/2” (12mm) BSPT REED1SB3/4 SOLID BLOCK DIE 3/4” (19mm) BSPT REED1SB1 SOLID BLOCK DIE 1” (25mm) BSPT REED

1SB1 1/4 SOLID BLOCK DIE 1 1/4” (32mm) BSPT REED

BLOCK DIES 4” X 4” – SUIT SD84 SERIES2SB1/2 SOLID BLOCK DIE 1/2” (12mm) BSPT REED2SB3/4 SOLID BLOCK DIE 3/4” (19mm) BSPT REED2SB1 SOLID BLOCK DIE 1” (25mm) BSPT REED

2SB1 1/4 SOLID BLOCK DIE 1 1/4” (32mm) BSPT REED2SB1 1/2 SOLID BLOCK DIE 1 1/2” (38mm) BSPT REED

2SB2 SOLID BLOCK DIE 2” (51mm) BSPT REED

3.1 HAND PIPE THREADERSCONT

BLOCK DIES - REED

Solid Dies for Steel/Stainless Steel �

Only REED solid block dies have wide throats �

and extra fine threads that actually pull thedie onto the pipe even if the burr is large.

Only REED has two chasers to cut and two chasers �

to guide the threads. REED chasers are cast in place in the foundry operation and are then machined as a unit (not bolted in place) for perfect alignment.

3TH

READ

ING

& GR

OOVI

NG E

QUIP

MENT

SERV

ING

AUST

RALI

A’S T

RADE

SMEN

SIN

CE 1

986

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00




BABY REED STYLE RATCHET PIPE THREADER - REX

This compact and light weight model ensures optimum threading in elevated or confined places. Ratchet is supplied. It has a proven versatility in applications for gas/water supply pipes and thin steel conduits (by replacing dies). The Baby Reed Style Threader can thread ½” - 1 ¼”.

PRODUCT CODE DESCRIPTIONRX1102R4 ½” – 1 ¼” BABY REED STYLE PIPE THREADER – REXRX154005 ½” 2R4 DIERX154007 ¾” 2R4 DIERX154009 1” 2R4 DIERX154010 1 ¼” 2R4 DIE

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0




BABY REED STYLE RATCHET PIPE THREADER - REX

This compact and light weight model ensures optimum threading in elevated or confined places. Ratchet is supplied. It has a proven versatility in applications for gas/water supply pipes and thin steel conduits (by replacing dies). The Baby Reed Style Threader can thread ½” - 1 ¼”.

PRODUCT CODE DESCRIPTIONRX1102R4 ½” – 1 ¼” BABY REED STYLE PIPE THREADER – REXRX154005 ½” 2R4 DIERX154007 ¾” 2R4 DIERX154009 1” 2R4 DIERX154010 1 ¼” 2R4 DIE

PLUMBOSS AUSTRALIA


5TH

READ

ING

& GR

OOVI

NG E

QUIP

MENT

PLUM

BOSS

- AU

STRA

LIA’S

OW

N PL

UMBI

NG T

OOL S

PECI

ALIS

TS

DROPHEAD THREADER SET - REX

12R TYPE

Rex drop heads and dies are ideal for in-place �

threading from 1/2” - 2” and are designed to fit Rex ratchet handle 112162 (BSPT) as well

as Wheeler Ratchet Handle 43310, the Ridge Tool Company models 12R, 00-R, 111-R, 0-R, 30A and 31A, 600 and 700 Power Drives and REED Mfg. DHR12 Series Drop Heads

Drop heads and ratchet with handle are �

supplied in a compact metal carry case

Dies available from 1/8” to 2” BSPT �

PRODUCT CODE DESCRIPTIONRX112055 ½” – 1 ¼” REX DROPHEAD THREADER SET (12R)RX112051 ⅛” – 2” REX DROPHEAD THREADER SET (12R)RX112052 ½” – 2” REX DROPHEAD THREADER SET (12R)RX112162 12R RATCHET HANDLE ONLYRX112021 ⅛” DIE HEAD BSPT (12R)RX112022 ¼” DIE HEAD BSPT (12R)RX112023 ⅜” DIE HEAD BSPT (12R)RX112024 ½” DIE HEAD BSPT (12R)RX112025 ¾” DIE HEAD BSPT (12R)RX112026 1” DIE HEAD BSPT (12R)RX112027 1 ¼” DIE HEAD BSPT (12R)RX112028 1 ½” DIE HEAD BSPT (12R)RX112029 2” DIE HEAD BSPT (12R)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


3.2 POWER OPERATED THREADERS


POWER DRIVE - REX

Lightweight and portable, the REX Mini Power Drive can thread up to 2” diameter pipe or conduit and 1” bolt or rod in just seconds. Accepts 12R type die heads with adapter. It requires only 1¾” clearance for working in trenches, overhead and in tight quarters. Mechanical high speed reverse speeds up removal after threading.

SPECIFICATIONS:

Fast Reverse SpeedPower Consumption: 1010WMachine Weight: 6.5kgCarry Case Dimensions: 640x263x114H (mm)

NP50 ELECTRIC PIPE THREADING MACHINE

A BEST SELLER AMONG COMPACT MACHINES!700W double insulated motor gives the �

NP50AV increased power and less noise than its predecessor the P50AVEasy to use, high productivity, �

excellent portability – only 46kgHermetically sealed oil tank prevents �

oil spillage during transportation.Both manual and uni-auto die �

head models availablePipe size can be adjusted simply �

by turning the lever nutThread length can be adjusted by just �

changing the lever contact (Uni-auto die head)

PRODUCT CODE DESCRIPTIONRX112051WPD ⅛” – 2” DROP HEAD THREADER WITH POWER DRIVE

RX112500 REX - POWER DRIVE ONLY

PRODUCT CODE DESCRIPTIONRX218001 NP50A ELECTRIC PIPE THREADING MACHINE ½” – 2” MANUALRX218232 NP50AV CE ELECTRIC PIPE THREADING MACHINE ½” – 2” AUTOMATIC

WITH FOOT SWITCHRX341501 ROLL GROOVER ATTACHMENT (SEE PAGE 11 FOR DETAILS)

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


3.2 POWER OPERATED THREADERS


POWER DRIVE - REX

Lightweight and portable, the REX Mini Power Drive can thread up to 2” diameter pipe or conduit and 1” bolt or rod in just seconds. Accepts 12R type die heads with adapter. It requires only 1¾” clearance for working in trenches, overhead and in tight quarters. Mechanical high speed reverse speeds up removal after threading.

SPECIFICATIONS:

Fast Reverse SpeedPower Consumption: 1010WMachine Weight: 6.5kgCarry Case Dimensions: 640x263x114H (mm)

NP50 ELECTRIC PIPE THREADING MACHINE

A BEST SELLER AMONG COMPACT MACHINES!700W double insulated motor gives the �

NP50AV increased power and less noise than its predecessor the P50AVEasy to use, high productivity, �

excellent portability – only 46kgHermetically sealed oil tank prevents �

oil spillage during transportation.Both manual and uni-auto die �

head models availablePipe size can be adjusted simply �

by turning the lever nutThread length can be adjusted by just �

changing the lever contact (Uni-auto die head)

PRODUCT CODE DESCRIPTIONRX112051WPD ⅛” – 2” DROP HEAD THREADER WITH POWER DRIVE

RX112500 REX - POWER DRIVE ONLY

PRODUCT CODE DESCRIPTIONRX218001 NP50A ELECTRIC PIPE THREADING MACHINE ½” – 2” MANUALRX218232 NP50AV CE ELECTRIC PIPE THREADING MACHINE ½” – 2” AUTOMATIC

WITH FOOT SWITCHRX341501 ROLL GROOVER ATTACHMENT (SEE PAGE 11 FOR DETAILS)

PLUMBOSS AUSTRALIA

3.2 POWER OPERATED THREADERSCONT

7TH

READ

ING

& GR

OOVI

NG E

QUIP

MENT

AUST

RALI

A’S T

RUST

ED P

LUMB

ING

TOOL

BRA

ND

S80A ELECTRIC PIPE THREADING MACHINE

Based on a totally new concept, the S80A is designed to be user friendly and completely reliable. It is a machine that gives you total control and satisfaction on the job.

Thread length can be adjusted just �

by changing the lever contact

Makes a smooth, beautifully finished�

tapered thread with ease

The die head has micro-fine adjustment dials�

to simplify fine adjustment of the thread foreach size of pipe. (Self opening die head)

PRODUCT CODE DESCRIPTIONRX274204 S80A ELECTRIC PIPE THREADING MACHINE ½” – 3” MANUALRX274284 S80AV ELECTRIC PIPE THREADING MACHINE ½” – 3” SEMI-AUTOMATIC

WITH FOOT SWITCHRX274253 S80AVIII ELECTRIC PIPE THREADING MACHINE ½” – 3” AUTOMATIC (BSP ONLY)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



THREADING & GROOVING EQUIPMENT

8

N100A ELECTRIC PIPE THREADING MACHINE

EFFICIENT 3 SPEED TRANSMISSION SPEEDS UP YOUR WORK!

Less than 100sec to make a perfect 4” pipe taper �

thread. Less than 20sec for a 1” pipe taper thread.Uni-auto die head for ½” – 2” pipe. Dies �

are compatible with S80A manual die heads and NP50AV uni-auto die heads.Profiling die head for 2 ½” – 4” pipe. REX�

original profiling system enables precise, straighttapers, with 20mm dies performing at higher speed and requiring less power consumption.Quick, adaptable cutter�

Quiet, maintenance free condenser motor�

Built in tool box is convenient for on-site work�

Large capacity scrap catcher�

Threading size, thread length and �

micro fine adjustment of threaddiameter can all be adjusted easily

PRODUCT CODE DESCRIPTIONRX35A570 N100A ELECTRIC PIPE THREADING MACHINE ½” – 4”RX366500 N150A ELECTRIC PIPE THREADING MACHINE 2 ½” – 6”

Quick, adaptable cutterProfiling system enables precise, straight tapers.

Easy thread adjustments

3 speeds for threading Built in tool box is convenient for on-site work.

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



THREADING & GROOVING EQUIPMENT

8

N100A ELECTRIC PIPE THREADING MACHINE

EFFICIENT 3 SPEED TRANSMISSION SPEEDS UP YOUR WORK!

Less than 100sec to make a perfect 4” pipe taper �

thread. Less than 20sec for a 1” pipe taper thread.Uni-auto die head for ½” – 2” pipe. Dies �

are compatible with S80A manual die heads and NP50AV uni-auto die heads.Profiling die head for 2 ½” – 4” pipe. REX�

original profiling system enables precise, straighttapers, with 20mm dies performing at higher speed and requiring less power consumption.Quick, adaptable cutter�

Quiet, maintenance free condenser motor�

Built in tool box is convenient for on-site work�

Large capacity scrap catcher�

Threading size, thread length and �

micro fine adjustment of threaddiameter can all be adjusted easily

PRODUCT CODE DESCRIPTIONRX35A570 N100A ELECTRIC PIPE THREADING MACHINE ½” – 4”RX366500 N150A ELECTRIC PIPE THREADING MACHINE 2 ½” – 6”

Quick, adaptable cutterProfiling system enables precise, straight tapers.

Easy thread adjustments

3 speeds for threading Built in tool box is convenient for on-site work.

PLUMBOSS AUSTRALIA


9TH

READ

ING

& GR

OOVI

NG E

QUIP

MENT

THE

TUBE

& P

IPE

TOOL

SPE

CIAL

ISTS

DIES

Rex dies produce better threads!!

Due to the relative ease of obtaining a leak free seal with a NPT thread (NPT have tapered sockets. BSPT have parallel sockets therefore BSPT threads seal over a shorter distance), manufacturers of machines designed principally for the NPT thread form have not ensured that their machines produce a high quality, well formed thread that is required when forming BSPT threads. Rex dies are designed around BSPT threading and produce superior quality threads when compared to other manufacturers.

DIES TABLETABLE KEY:

The colours below represent the machines that each die is compatible with. The relevant dies are represented by the ‘RX’ codes displayed in the table.

P50AV

S80A

N100A

N150A

DIES AVAILABLE FOR BOLT THREADING & CONDUIT FOR ALL MAKES & MODELS ALL R50A DIES ARE COMPATIBLE WITH THE 300 AND 300 COMPACT.

BSPT WIDTH ALLOY HSS SUS1/4” - 3/8” 23mm RX160003 RX166003

1/2” - 3/4” 27mm RX161907 RX166007 RX1663511” - 2” 27mm RX16K030 RX16K230 RX166357

2 1/2” - 3” 27mm RX161950 RX166050 RX1663542 1/2” - 4” 20mm RX162460 RX16C060

5” - 6” 20mm RX162470 RX16C070

NPT WIDTH ALLOY HSS SUS1/2” - 3/4” 27mm RX161307 RX166307

1” - 2” 27mm RX16K330 RX16K430

2 1/2” - 3” 27mm RX161350 RX166350

2 1/2” - 4” 20mm RX162360

5” - 6” 20mm RX162370

R50A BSPT WIDTH ALLOY HSS SUS1/2” - 3/4” 27mm RX161353 RX161357

1” - 2” 27mm RX161354 RX161358

R50A NPT WIDTH ALLOY HSS SUS1/2” - 3/4” 27mm RX161351 RX161355

1” - 2” 27mm RX161352 RX161356

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


THREADING & GROOVING EQUIPMENT 10


THREADING OIL

Rex Red label threading oil is an oil for general plumbing use suitable for both lubricating and cooling.It is especially useful when cutting at low speed.

Rex Black label threading oil is a special oil developed for use with stainless steel pipes requiring extremely high lubrication oil.

THREADER CART

Threader carts are a great way to transport your threading machine around the job site.They also fold up for easy storage with or with out your threading machine attached.

PRODUCT CODE DESCRIPTIONRX181613 4L REX RED LABEL THREADING OILRX186610 18L REX RED LABEL THREADING OILRX183011 4L REX BLACK LABEL THREADING OILRX183012 16L REX BLACK LABEL THREADING OIL

PRODUCT CODE DESCRIPTIONRX170250 2” THREADER CARTRX170260 3” THREADER CART

UNIVERSAL DIE HEAD

The R811 head offers positive alignment, size selection, and quick, manual release. The full line of Universal Dies made from alloy and high-speed steel gives clean threads and long die life.

PRODUCT CODE DESCRIPTIONR811 UNIVERSAL HEAD

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0




THREADING OIL

Rex Red label threading oil is an oil for general plumbing use suitable for both lubricating and cooling.It is especially useful when cutting at low speed.

Rex Black label threading oil is a special oil developed for use with stainless steel pipes requiring extremely high lubrication oil.

THREADER CART

Threader carts are a great way to transport your threading machine around the job site.They also fold up for easy storage with or with out your threading machine attached.

PRODUCT CODE DESCRIPTIONRX181613 4L REX RED LABEL THREADING OILRX186610 18L REX RED LABEL THREADING OILRX183011 4L REX BLACK LABEL THREADING OILRX183012 16L REX BLACK LABEL THREADING OIL

PRODUCT CODE DESCRIPTIONRX170250 2” THREADER CARTRX170260 3” THREADER CART

UNIVERSAL DIE HEAD

The R811 head offers positive alignment, size selection, and quick, manual release. The full line of Universal Dies made from alloy and high-speed steel gives clean threads and long die life.

PRODUCT CODE DESCRIPTIONR811 UNIVERSAL HEAD

PLUMBOSS AUSTRALIA

11TH

READ

ING

& GR

OOVI

NG E

QUIP

MENT

IMPO

RTER

S &

MANU

FACT

URER

S OF

PLU

MBIN

G EQ

UIPM

ENT

3.3 POWER OPERATED ROLL GROOVERS

PRODUCT CODE DESCRIPTIONRX341501 RG-R1 ROLL GROOVER ATTACHMENT 2” – 6”. OPTIONAL BASES TO SUIT

(NP50AV, S80A, N100A, 300 AND 300 COMPACT)

PRODUCT CODE DESCRIPTIONNPGM1 POWER DRIVE AND ROLL GROOVER COMBINATION

RG-R1 ROLL GROOVER ATTACHMENT 2” – 6”

ATTACHES TO MOST POWER DRIVE UNITS FOR FAST, EASY GROOVING

Anti-slipping device enables �

safe, efficient processing.Groove depth easily adjusted�

Makes groove on 1” – 6” schedule 10 �

and 1” – 3” schedule 40 steel pipesPower mechanism enables �

grooving with minimal forceCompact, lightweight and excellent durability�

POWER DRIVE AND ROLL GROOVER COMBINATION

The NPGM1 is a 600W power unit with the above RG-R1 attached. It is a simple and cost effective way to groove 2” – 6” pipe.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


3.3 POWER OPERATED ROLL GROOVERSCONT


RG-150 SERIES ROLL GROOVER 2” – 6” AUTOMATIC

ACCESSORIES AVAILABLE TO 16”Self Centering Head – The head adjusts up �

to an amazing 8º to ensure a perfect groove every time. The carrying handles also serve as a guide to make setting pipes easierIndicator Lamp – The indicator lamp �

automatically lights up when grooving is complete so that even a beginner can be sure of achieving the correct groove depthAutomatic Pump – The electric powered �

pump was developed specifically for thismachine to make accurate grooving easierProvided with tool box, spirit level, �

spanner, T-wrench and grease.

PRODUCT CODE DESCRIPTIONRX341080 RG-150 ROLL GROOVER 2” – 6” MANUAL. (ACCESSORIES AVAILABLE TO 16”)RX341082 RG-150 ROLL GROOVER 2” – 6” MANUAL. (ACCESSORIES AVAILABLE TO 16”)

WITH FOOT SWITCHRX341071 RG-150A ROLL GROOVER 2” – 6” AUTOMATIC. (ACCESSORIES AVAILABLE TO 16”) RX341074 RG-150A ROLL GROOVER 2” – 6” AUTOMATIC. (ACCESSORIES AVAILABLE TO 16”)

WITH FOOT SWITCHRX341111 8” – 12” ROLLER SET

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


3.3 POWER OPERATED ROLL GROOVERSCONT


RG-150 SERIES ROLL GROOVER 2” – 6” AUTOMATIC

ACCESSORIES AVAILABLE TO 16”Self Centering Head – The head adjusts up �

to an amazing 8º to ensure a perfect groove every time. The carrying handles also serve as a guide to make setting pipes easierIndicator Lamp – The indicator lamp �

automatically lights up when grooving is complete so that even a beginner can be sure of achieving the correct groove depthAutomatic Pump – The electric powered �

pump was developed specifically for thismachine to make accurate grooving easierProvided with tool box, spirit level, �

spanner, T-wrench and grease.

PRODUCT CODE DESCRIPTIONRX341080 RG-150 ROLL GROOVER 2” – 6” MANUAL. (ACCESSORIES AVAILABLE TO 16”)RX341082 RG-150 ROLL GROOVER 2” – 6” MANUAL. (ACCESSORIES AVAILABLE TO 16”)

WITH FOOT SWITCHRX341071 RG-150A ROLL GROOVER 2” – 6” AUTOMATIC. (ACCESSORIES AVAILABLE TO 16”) RX341074 RG-150A ROLL GROOVER 2” – 6” AUTOMATIC. (ACCESSORIES AVAILABLE TO 16”)

WITH FOOT SWITCHRX341111 8” – 12” ROLLER SET

PLUMBOSS AUSTRALIA

3.4 HAND OPERATED ROLL GROOVERS

13TH

READ

ING

& GR

OOVI

NG E

QUIP

MENT

SERV

ING

AUST

RALI

A’S T

RADE

SMEN

SIN

CE 1

986

PRODUCT CODE DESCRIPTIONRG6S STEEL ROLL GROOVER 1 ¼” - 6” REED RG26S STEEL ROLL GROOVER HAND OPERATED 2” - 6” REEDRG6CU COPPER ROLL GROOVER 1 ¼” - 6” REEDRG26CU COPPER ROLL GROOVER HAND OPERATED 2”- 6” REED

RG6HDCOMBO COMBO ROLL GROOVER 1 ¼” – 6” REED

REED PORTABLE ROLL GROOVERS

REED portable roll groovers are compact, durable tools for use at installation sites.

RG6 Model - designed to be powered by Ridgid® Model 300 Power Drive - will groove 1 1/4” to 6” schedule 5S - 40 pipe. Unlike similar models, the RG6S has heavy duty bearings and a steel body to withstand the punishment of severe grooving applications. Finger-adjust depth screw and gauge provide quick adjustment and accurate, repeatable groove depths. No bulky adjusting wrenches required. It has sealed bearings for long life.

RG26 Model -for grooving in-place pipe, and pipe too short for powered groovers. It is easily carried and positioned with a convenient handle. Included ratcheting crank is used for feeding and turning. The RG26 is the easiest in-place groover to handle and operate. It uses heavy duty bearings, hardened and ground shafts and rollers mounted in a ductile iron housing for durability.

RG6CU and RG26CU have new rollers and shafts to meet copper grooving specifications.

COMBO ROLL GROOVERThe RG6HDCOMBO forms standard rolled grooves in steel, stainless steel, PVC and aluminium pipe from 1 ¼” – 6” capacity, Sch. 10 and 40. This professional grade roll groover is designed for both machine and in-place grooving with one tool.There is no change of roll groove or drive shaft the only adjustment required is for groove depth. The RG6HDCOMBO’s strong construction features surpass competitive products, making it the best choice!

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


4wrenches & vices

4.1 ADJUSTABLE WRENCHES 2

4.2 CHAIN WRENCHES 4

4.3 ONE HAND WRENCHES 6

4.4 TORQUE WRENCHES 6

4.5 VALVE WHEEL WRENCHES 7

4.6 SELF ADJUSTABLE PIPE WRENCHES 7

4.7 PIPE WRENCHES 8

4.8 ROLLNUT WRENCHES 10

4.9 SMOOTH JAW WRENCHES 11

4.10 STRAP WRENCHES - REED 11

4.11 THRU-BOLT WRENCHES AND SOCKETS 12

4.12 DUAL SIZE PODGER WRENCHES 13

4.13 CHAIN VICES 13

4.14 VICES 15

4.15 PIPE JACKS 16

4.16 ROLLER PIPE STAND 17

4.17 FIELD PIPE VICE - REED 17

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


4.1 ADJUSTABLE WRENCHES

PRODUCT CODE DESCRIPTION DISCOUNT QTY.CW4 ADJUSTABLE WRENCH 4” (100mm) IREGA 12 ASSORTEDCW6 ADJUSTABLE WRENCH 6” (150mm) IREGA 12 ASSORTEDCW8 ADJUSTABLE WRENCH 8” (200mm) IREGA 12 ASSORTED

CW10 ADJUSTABLE WRENCH 10” (250mm) IREGA 12 ASSORTEDCW12 ADJUSTABLE WRENCH 12” (300mm) IREGA 12 ASSORTEDCW15 ADJUSTABLE WRENCH 15” (375mm) IREGA 12 ASSORTEDCW18 ADJUSTABLE WRENCH 18” (450mm) IREGA 12 ASSORTEDCW24 ADJUSTABLE WRENCH 24” (600mm) IREGA 12 ASSORTED

PRODUCT CODE DESCRIPTIONADJ6 ADJUSTABLE WRENCH 6” (150mm) ADJ8 ADJUSTABLE WRENCH 8” (200mm)

ADJ10 ADJUSTABLE WRENCH 10” (250mm) ADJ12 ADJUSTABLE WRENCH 12” (300mm)

ADJUSTABLE WRENCHES - TOP QUALITY

Largest range of sizes �

Handles and jaws are machined precisely so that �

they are the smoothest operating wrench made Hardened and tempered forged alloy steel handles �

Phosphorous bronze springs �

Triple coated nickel-chrome exterior finish �

Constructed of the finest materials available �

ADJUSTABLE WRENCHES - MID RANGEIncreased speed:Metric scale - laser etched onto jaw - for fast setting of tool to fit nut/bolt size

Increased versatility:Extra wide jaw - can be used for tightening nuts and bolts of a larger size than many other adjustable wrenches of similar length

Increased durability:Chrome vanadium - steelbody

Comfort and grip: Ergonomic soft feel sleeve

Increased product life: Rust resistant lacquer

WRENCES & VICES

2PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


4.1 ADJUSTABLE WRENCHES

PRODUCT CODE DESCRIPTION DISCOUNT QTY.CW4 ADJUSTABLE WRENCH 4” (100mm) IREGA 12 ASSORTEDCW6 ADJUSTABLE WRENCH 6” (150mm) IREGA 12 ASSORTEDCW8 ADJUSTABLE WRENCH 8” (200mm) IREGA 12 ASSORTEDCW10 ADJUSTABLE WRENCH 10” (250mm) IREGA 12 ASSORTEDCW12 ADJUSTABLE WRENCH 12” (300mm) IREGA 12 ASSORTEDCW15 ADJUSTABLE WRENCH 15” (375mm) IREGA 12 ASSORTEDCW18 ADJUSTABLE WRENCH 18” (450mm) IREGA 12 ASSORTEDCW24 ADJUSTABLE WRENCH 24” (600mm) IREGA 12 ASSORTED

PRODUCT CODE DESCRIPTIONADJ6 ADJUSTABLE WRENCH 6” (150mm) ADJ8 ADJUSTABLE WRENCH 8” (200mm)

ADJ10 ADJUSTABLE WRENCH 10” (250mm) ADJ12 ADJUSTABLE WRENCH 12” (300mm)

ADJUSTABLE WRENCHES - TOP QUALITY

Largest range of sizes �

Handles and jaws are machined precisely so that �

they are the smoothest operating wrench made Hardened and tempered forged alloy steel handles �

Phosphorous bronze springs �

Triple coated nickel-chrome exterior finish �

Constructed of the finest materials available �

ADJUSTABLE WRENCHES - MID RANGEIncreased speed:Metric scale - laser etched onto jaw - for fast setting of tool to fit nut/bolt size

Increased versatility:Extra wide jaw - can be used for tightening nuts and bolts of a larger size than many other adjustable wrenches of similar length

Increased durability:Chrome vanadium - steelbody

Comfort and grip: Ergonomic soft feel sleeve

Increased product life: Rust resistant lacquer

WRENCES & VICES

2PLUMBOSS AUSTRALIA

PRODUCT CODE DESCRIPTIONPGP10 POSITIVE GRIP PLIER 10” (250mm) REED PGP12 POSITIVE GRIP PLIER 12” (300mm) REED

PRODUCT CODE DESCRIPTIONSBW125 TELESCOPIC BASIN WRENCH ⅜” - 1 ¼” cap. SILVA

4.1 ADJUSTABLE WRENCHESCONT

REED POSITIVE GRIP PLIERS

The combination of jaw, handle and tongue and �

groove design only requires downward pressure, no squeezing, once pliers are engaged.

Smooth tongue and groove action makes the most�

effective pliers on the market for one hand operation.

Forged from high quality, high carbon �

steel and fully heat treated for long life.

BASIN WRENCH

This Basin Wrench is designed for use under sinks and in other tight quarters. Its forged steel jaws are spring-loaded for one-hand ratcheting. Telescoping handle adjusts from 10”-17” (250-425mm)

3W

RENC

HES

& VI

CES

PLUM

BOSS

- AU

STRA

LIA’S

OW

N PL

UMBI

NG T

OOL S

PECI

ALIS

TS

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


4.2 CHAIN WRENCHES

WRENCHES & VICES

4

PRODUCT CODE DESCRIPTIONUCW12S UTILITY CHAIN WRENCH ¼” - 4” cap. SILVA

PRODUCT CODE DESCRIPTIONWA14 CHAIN WRENCH ⅛” - 2” (10mm-60mm) cap. REED

WA18A CHAIN WRENCH ¼” - 2 ½” (14mm-75mm) cap. REEDWA24A CHAIN WRENCH ¼” - 3” (14mm-90mm) cap. REEDWA36 CHAIN WRENCH ½” - 4 ½” (21mm-127mm) cap. REEDWA48 CHAIN WRENCH 1” - 6” (33mm-168mm) cap. REEDWA60 CHAIN WRENCH 1 ½” - 8” (48mm-225mm) cap. REEDWA72 CHAIN WRENCH 2 ½” - 12” (73mm-324mm) cap. REEDWA84 CHAIN WRENCH 2 ½” - 18” (73mm-457mm) cap. REED

UTILITY CHAIN WRENCH

Chain Pipe Wrenches are used in confined spaces, for instance, where the pipe is in a trench, against a wall or close to a nest of other piping. Once the chain is looped around the pipe and locked, the jaws will grip in the direction of the turn. The pipe can then be tightened or loosened with short strokes of the handle.

CHAIN WRENCHES (HEAVY DUTY) - REED

Turn any shape in close quarters. Dual reversible jaws permit ratchet action in either direction without removing the wrench from the pipe. REED Chain Wrenches offer by far the most sizes and are longer lasting because they have up to twice as many chain slots as any competitive tool.

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


4.2 CHAIN WRENCHES

WRENCHES & VICES

4

PRODUCT CODE DESCRIPTIONUCW12S UTILITY CHAIN WRENCH ¼” - 4” cap. SILVA

PRODUCT CODE DESCRIPTIONWA14 CHAIN WRENCH ⅛” - 2” (10mm-60mm) cap. REED

WA18A CHAIN WRENCH ¼” - 2 ½” (14mm-75mm) cap. REEDWA24A CHAIN WRENCH ¼” - 3” (14mm-90mm) cap. REEDWA36 CHAIN WRENCH ½” - 4 ½” (21mm-127mm) cap. REEDWA48 CHAIN WRENCH 1” - 6” (33mm-168mm) cap. REEDWA60 CHAIN WRENCH 1 ½” - 8” (48mm-225mm) cap. REEDWA72 CHAIN WRENCH 2 ½” - 12” (73mm-324mm) cap. REEDWA84 CHAIN WRENCH 2 ½” - 18” (73mm-457mm) cap. REED

UTILITY CHAIN WRENCH

Chain Pipe Wrenches are used in confined spaces, for instance, where the pipe is in a trench, against a wall or close to a nest of other piping. Once the chain is looped around the pipe and locked, the jaws will grip in the direction of the turn. The pipe can then be tightened or loosened with short strokes of the handle.

CHAIN WRENCHES (HEAVY DUTY) - REED

Turn any shape in close quarters. Dual reversible jaws permit ratchet action in either direction without removing the wrench from the pipe. REED Chain Wrenches offer by far the most sizes and are longer lasting because they have up to twice as many chain slots as any competitive tool.

PLUMBOSS AUSTRALIA

4.2 CHAIN WRENCHESCONT

5W

RENC

HES

& VI

CES

SERV

ING

AUST

RALI

A’SPL

UMBE

RSSI

NCE

1986

PRODUCT CODE DESCRIPTIONR229 DOUBLE END CHAIN TONGS ¼” - 2 ½” cap. REED R231 DOUBLE END CHAIN TONGS ¾” - 4” cap. REED R233 DOUBLE END CHAIN TONGS 1” - 6” cap. REEDR235 DOUBLE END CHAIN TONGS 1 ½” - 8” cap. REEDR237 DOUBLE END CHAIN TONGS 2” - 12” cap. REEDR215 SINGLE END CHAIN TONGS 4” - 18” cap. REED

PRODUCT CODE DESCRIPTION231½ CHAIN TONG - 60mm cap. 232½ CHAIN TONG - 90mm cap. 233C CHAIN TONG - 115mm cap. 234C CHAIN TONG - 220mm cap. 235C CHAIN TONG - 330mm cap.

CHAIN TONGS (HEAVY DUTY) — REED

Durable long lasting tongs for all types of pipe fitting jobs, from oil field to general work. Tools consist of solid, full length handles of forged steel and strong, flat link chains. Hardened steel jaws are replaceable and interchangeable with major brands. As with other brands, single and double end tongs require different chains, jaws, and bolts.

CHAIN TONGS

The jaws are made from drop-forged steel which is then hardened and tempered. Only the front set of teeth bear on the pipe, which means that when these become worn, the jaws can be reversed, doubling the life of the tool.

The handles (233C to 235C) are tubular steel attached to solid ductile iron castings. The 231½ and 232½ are entirely drop forged steel.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


4.3 ONE HAND WRENCHES - REED

4.4 TORQUE WRENCHES

WRENCHES & VICES

6

PRODUCT CODE DESCRIPTIONMW3/4 ONE HAND WRENCH 1/8” - 3/4” cap. REED MW1¼ ONE HAND WRENCH 1” - 1 ¼” cap. REED

PRODUCT CODE DESCRIPTIONTW516 5/16” TORQUE WRENCH (TORQUE = 6.8 NEWTON METRE)TW38 3/8” TORQUE WRENCH (TORQUE = 9.0 NEWTON METRE)

Best for working in tight places, including meter pits. It features a much stronger forged steel one piece handle. Can grip any shape: meter nuts, round pipe or parts of fittings without adjustment. Ratchet action allows for easiest one-hand operation.

TORQUE WRENCHES FOR CAST IRON SOIL PIPE

Torque Wrenches are engineered to provide recommended torque on flexible connection seals. Wrenches can also loosen clamp screws and are designed for hand comfort.

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


4.3 ONE HAND WRENCHES - REED

4.4 TORQUE WRENCHES

WRENCHES & VICES

6

PRODUCT CODE DESCRIPTIONMW3/4 ONE HAND WRENCH 1/8” - 3/4” cap. REED MW1¼ ONE HAND WRENCH 1” - 1 ¼” cap. REED

PRODUCT CODE DESCRIPTIONTW516 5/16” TORQUE WRENCH (TORQUE = 6.8 NEWTON METRE)TW38 3/8” TORQUE WRENCH (TORQUE = 9.0 NEWTON METRE)

Best for working in tight places, including meter pits. It features a much stronger forged steel one piece handle. Can grip any shape: meter nuts, round pipe or parts of fittings without adjustment. Ratchet action allows for easiest one-hand operation.

TORQUE WRENCHES FOR CAST IRON SOIL PIPE

Torque Wrenches are engineered to provide recommended torque on flexible connection seals. Wrenches can also loosen clamp screws and are designed for hand comfort.

PLUMBOSS AUSTRALIA

4.5 VALVE WHEEL WRENCHES

4.6 SELF ADJUSTING PIPE WRENCHES

7W

RENC

HES

& VI

CES

AUST

RALI

A’STR

USTE

DPL

UMBI

NGBR

AND

PRODUCT CODE DESCRIPTIONVW10 DOUBLE ENDED FORGED STEEL VALVE WHEEL WRENCH

(18mm/25mm HOOK OPENING)

PRODUCT CODE DESCRIPTIONFG08 FASGRIP WRENCH 8” (200mm) FG10 FASGRIP WRENCH 10” (250mm) FG12 FASGRIP WRENCH 12” (300mm) FG14 FASGRIP WRENCH 14” (350mm) FG18 FASGRIP WRENCH 18” (450mm) FG24 FASGRIP WRENCH 24” (600mm) FG36 FASGRIP WRENCH 36” (900mm)FG48 FASGRIP WRENCH 48” (1200mm)

The REED valve wheel wrenches are designed to grip the rims of hand valve wheels securely and provide leverage for opening and closing. Each wrench fits a variety of sizes and shapes of valve wheels. REED valve wheel wrenches are made of high strength materials for durability.

The FASGRIP self adjusting pipe wrench

features:

Self adjusting, 3 point grip �

One handed operation �

Note: Use with gloves on one handed operation.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


4.7 PIPE WRENCHES

WRENCHES & VICES

8

DUCTILE IRON - HEAVY DUTY

The most popular pipe wrench style. Parts are interchangeable with all major brands. High tensile ductile iron handle and hardened tool steel parts are designed to withstand the heaviest demands. Offset wrenches have similar construction and provide longer swing in hard to reach places.

ALUMINIUM - HEAVY DUTY

Light weight and strong. Titanium-aluminium alloy handle, heat treated for maximum strength. These wrenches exceed U.S. Government specifications for ductile iron wrenches, but weigh about half as much and carry the same REED Lifetime Warranty. Offset wrenches have similar construction with longer swing for hard to reach places.

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


4.7 PIPE WRENCHES

WRENCHES & VICES

8

DUCTILE IRON - HEAVY DUTY

The most popular pipe wrench style. Parts are interchangeable with all major brands. High tensile ductile iron handle and hardened tool steel parts are designed to withstand the heaviest demands. Offset wrenches have similar construction and provide longer swing in hard to reach places.

ALUMINIUM - HEAVY DUTY

Light weight and strong. Titanium-aluminium alloy handle, heat treated for maximum strength. These wrenches exceed U.S. Government specifications for ductile iron wrenches, but weigh about half as much and carry the same REED Lifetime Warranty. Offset wrenches have similar construction with longer swing for hard to reach places.

PLUMBOSS AUSTRALIA

4.7 PIPE WRENCHESCONT

9W

RENC

HES

& VI

CES

THE

PLUM

BING

TOOL

SPEC

IALI

STS

PRODUCT CODE DESCRIPTIONSTRAIGHT DUCTILE IRON

RW6 D/IRON PIPE WRENCH 6” (150mm) REED RW8 D/IRON PIPE WRENCH 8” (200mm) REED RW10 D/IRON PIPE WRENCH 10” (250mm) REED RW12 D/IRON PIPE WRENCH 12” (300mm) REED RW14 D/IRON PIPE WRENCH 14” (350mm) REED RW18 D/IRON PIPE WRENCH 18” (450mm) REED RW24 D/IRON PIPE WRENCH 24” (600mm) REED RW36 D/IRON PIPE WRENCH 36” (900mm) REEDRW48 D/IRON PIPE WRENCH 48” (1200mm) REED

OFFSET DUCTILE IRON RWO8 D/IRON PIPE WRENCH OFFSET 8” (200mm) REED

RWO10 D/IRON PIPE WRENCH OFFSET 10” (250mm) REEDRWO12 D/IRON PIPE WRENCH OFFSET 12” (300mm) REEDRWO14 D/IRON PIPE WRENCH OFFSET 14” (350mm) REEDRWO18 D/IRON PIPE WRENCH OFFSET 18” (450mm) REEDRWO24 D/IRON PIPE WRENCH OFFSET 24” (600mm) REED

STRAIGHT ALUMINIUMARW10 ALUMINIUM PIPE WRENCH 10” (250mm) REEDARW14 ALUMINIUM PIPE WRENCH 14” (350mm) REEDARW18 ALUMINIUM PIPE WRENCH 18” (450mm) REED ARW24 ALUMINIUM PIPE WRENCH 24” (600mm) REEDARW36 ALUMINIUM PIPE WRENCH 36” (900mm) REEDARW48 ALUMINIUM PIPE WRENCH 48” (1200mm) REED

90˚ OFFSET ALUMINIUMARWO14 ALUMINIUM PIPE WRENCH OFFSET 14” (350mm) REEDARWO18 ALUMINIUM PIPE WRENCH OFFSET 18” (450mm) REED

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


WRENCHES & VICES 10


4.8 ROLLNUT WRENCHES

PRODUCT CODE DESCRIPTION300/10 STILLSON PIPE WRENCH 10” (250mm) 300/12 STILLSON PIPE WRENCH 12” (300mm) 300/14 STILLSON PIPE WRENCH 14” (350mm)300/18 STILLSON PIPE WRENCH 18” (450mm)300/24 STILLSON PIPE WRENCH 24” (600mm)

PRODUCT CODE DESCRIPTIONFP900/7 ROLLNUT WRENCH 7” (175mm) FOOTPRINTFP900/9 ROLLNUT WRENCH 9” (225mm) FOOTPRINT

FP900/12 ROLLNUT WRENCH 12” (300mm) FOOTPRINTFWO900/12 OFFSET ROLLNUT WRENCH 12” (300mm)

PB900/7 ROLLNUT WRENCH 7” (175mm) PLUMBOSSPB900/9 ROLLNUT WRENCH 9” (225mm) PLUMBOSS


STILLSON WRENCHES

The three essential load bearing �

components - handle, hook jaws and adjusting nut- are made of steel

Depending on size, the jaw teeth are flame�

hardened and air tempered. This processimparts a resistance to wear and distortion,

for a long, effective working life. The adjustingnut is also hardened and tempered

The original Footprint Wrench with solid forged hook and pressed steel frame. Precision milled and hardened teeth. This traditional plumbers’ tool is a genuine “all purpose” wrench. With a thumb turn knurled nut which provides easy adjustment with one hand.

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


WRENCHES & VICES 10


4.8 ROLLNUT WRENCHES

PRODUCT CODE DESCRIPTION300/10 STILLSON PIPE WRENCH 10” (250mm) 300/12 STILLSON PIPE WRENCH 12” (300mm) 300/14 STILLSON PIPE WRENCH 14” (350mm)300/18 STILLSON PIPE WRENCH 18” (450mm)300/24 STILLSON PIPE WRENCH 24” (600mm)

PRODUCT CODE DESCRIPTIONFP900/7 ROLLNUT WRENCH 7” (175mm) FOOTPRINTFP900/9 ROLLNUT WRENCH 9” (225mm) FOOTPRINT

FP900/12 ROLLNUT WRENCH 12” (300mm) FOOTPRINTFWO900/12 OFFSET ROLLNUT WRENCH 12” (300mm)



STILLSON WRENCHES

The three essential load bearing �

components - handle, hook jaws and adjusting nut- are made of steel

Depending on size, the jaw teeth are flame�

hardened and air tempered. This processimparts a resistance to wear and distortion,

for a long, effective working life. The adjustingnut is also hardened and tempered

The original Footprint Wrench with solid forged hook and pressed steel frame. Precision milled and hardened teeth. This traditional plumbers’ tool is a genuine “all purpose” wrench. With a thumb turn knurled nut which provides easy adjustment with one hand.

PLUMBOSS AUSTRALIA

11W

RENC

HES

& VI

CES

IMPO

RTER

SAN

DMA

NUFA

CTUR

ERS

OFPL

UMBI

NGEQ

UIPM

ENT

4.9 SMOOTH JAW WRENCHES

4.10 STRAP WRENCHES - REED

PRODUCT CODE DESCRIPTIONR110HEX HEX WRENCH 2 5/8” (67mm) cap. REEDRSPUD SPUD WRENCH 2 5/8” (61mm) cap. REED

PRODUCT CODE DESCRIPTIONSW12A 12” STRAP WRENCH - 90mm cap. REED

SW12A30 12” STRAP WRENCH - 190mm cap. REED SW18A 18” STRAP WRENCH - 150mm cap. REEDSW24A 24” STRAP WRENCH - 350mm cap. REED

Large capacity wrenches for geometric and delicate work

R110HEX� works for hex-shaped fittings on meters, drains, spuds and chrome valves without damage from teeth.

RSPUD� is for square, hex or octagonal shapes where toothed pipe wrenches are not a good option.

Both wrenches are heavy-duty, made from ductile iron and forged steel, offering a larger capacity than adjustable wrenches.

Provides gripping power without scratching�

or deforming plastic or polished metal pipe.

REED’s extra strong, coated polyester strap�

is far superior to competitor’s cotton strapsfor slip resistance, strength and durability

Use on plastic pipe, filters or any�

slick or smooth surface.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


4.11 THRU-BOLT WRENCHES & SOCKETS

WRENCHES & VICES 12

PRODUCT CODE DESCRIPTIONL500 CAST QUICK RELEASE RATCHET HANDLE L150 STAMPED RETAINING RING RATCHET HANDLE

THRU-BOLT SOCKETSL10 THRU-BOLT SOCKET 5/8” L12 THRU-BOLT SOCKET 3/4” L14 THRU-BOLT SOCKET 7/8” L15 THRU-BOLT SOCKET 15/16” L16 THRU-BOLT SOCKET 1” L17 THRU-BOLT SOCKET 1 1/16”L18 THRU-BOLT SOCKET 1 1/8”L20 THRU-BOLT SOCKET 1 1/4”M17 THRU-BOLT SOCKET 17mmM19 THRU-BOLT SOCKET 19mmM22 THRU-BOLT SOCKET 22mmM24 THRU-BOLT SOCKET 24mmM27 THRU-BOLT SOCKET 27mmM30 THRU-BOLT SOCKET 30mmM32 THRU-BOLT SOCKET 32mm

L6EXT THRU-BOLT EXTENSION 6”

THRU-BOLT SETSL515M METRIC THRU-BOLT UTILITY SET

REED Thru-Bolt Ratchet Wrenches are designed for tightening or loosening nuts on long, threaded bolts of service saddles, repair clamps, flanges, mechanical couplings etc. Thru-Bolt Ratchet Handles and Sockets substantially reduce the time required to tighten or remove nuts so assembly time is cut considerably.

Individual handles are available, made with traditional malleable iron or lower cost steel stampings. Individual sockets are available as well as whole sets and fit all wrench handles listed.

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


4.11 THRU-BOLT WRENCHES & SOCKETS

WRENCHES & VICES 12

PRODUCT CODE DESCRIPTIONL500 CAST QUICK RELEASE RATCHET HANDLE L150 STAMPED RETAINING RING RATCHET HANDLE

THRU-BOLT SOCKETSL10 THRU-BOLT SOCKET 5/8” L12 THRU-BOLT SOCKET 3/4” L14 THRU-BOLT SOCKET 7/8” L15 THRU-BOLT SOCKET 15/16” L16 THRU-BOLT SOCKET 1” L17 THRU-BOLT SOCKET 1 1/16”L18 THRU-BOLT SOCKET 1 1/8”L20 THRU-BOLT SOCKET 1 1/4”M17 THRU-BOLT SOCKET 17mmM19 THRU-BOLT SOCKET 19mmM22 THRU-BOLT SOCKET 22mmM24 THRU-BOLT SOCKET 24mmM27 THRU-BOLT SOCKET 27mmM30 THRU-BOLT SOCKET 30mmM32 THRU-BOLT SOCKET 32mm

L6EXT THRU-BOLT EXTENSION 6”

THRU-BOLT SETSL515M METRIC THRU-BOLT UTILITY SET

REED Thru-Bolt Ratchet Wrenches are designed for tightening or loosening nuts on long, threaded bolts of service saddles, repair clamps, flanges, mechanical couplings etc. Thru-Bolt Ratchet Handles and Sockets substantially reduce the time required to tighten or remove nuts so assembly time is cut considerably.

Individual handles are available, made with traditional malleable iron or lower cost steel stampings. Individual sockets are available as well as whole sets and fit all wrench handles listed.

PLUMBOSS AUSTRALIA

13W

RENC

HES

& VI

CES

PLUM

BOSS

SUP

PLY

PLUM

BING

, IND

USTR

IAL,

ELE

CTRI

CAL &

REF

RIGE

RATI

ON T

OOLS

4.12 DUAL SIZE PODGER WRENCHES

4.13 CHAIN VICES

PRODUCT CODE DESCRIPTIONSPW1922 DUAL SIZE PODGER RATCHET WRENCH 19mm and 22mm SPW2430 DUAL SIZE PODGER RATCHET WRENCH 24mm and 30mm SPW1924 DUAL SIZE PODGER RATCHET WRENCH 19mm and 24mm

SPW1924B CHROME PODGER WRENCHES BENT 19mm and 24mm

PRODUCT CODE DESCRIPTIONCV2 CHAIN VICE 1/8” - 2 ½” (10mm - 75mm) cap. REED CV4 CHAIN VICE 1/8” - 4” (10mm - 114mm) cap. REED CV5 CHAIN VICE 1/8” - 5” (10mm - 141mm) cap. REED

CV5P CHAIN VICE 1/8” - 5” (10mm - 141mm) cap. REED (FOR PLASTIC PIPE)

CV6 CHAIN VICE 1/8” - 6” (14mm - 168mm) cap. REEDCV8 CHAIN VICE 1/2” - 8” (21mm - 219mm) cap. REED

CV12 CHAIN VICE 3/4” - 12” (25mm - 325mm) cap. REED

These dual size podger ratchet wrenches are indispensable when working in tight spaces with long bolts. The hollow socket design allows for the excess thread to protrude through, making it possible to easily and quickly tighten gibbault joints and repair couplings, no matter how long the bolt is. The most common sizes are (19mm and 22mm), (24mm and 30mm) with other sizes available on request.

REED

Strongest Vices available �

Hardened tool steel jaws are triple-faced �

for rotations instead of replacements Fastest to use: two turns to open or close �

Chain vices permit the holding of irregular shapes �

Only REED has a 12” capacity Chain Vice �

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


4.13 CHAIN VICESCONT

WRENCHES & VICES 14

PRODUCT CODE DESCRIPTIONRX120CVB CVX6 TRISTAND CHAIN VICE 1/8” - 6” REX

TRISTAND CHAIN VICE

All-in-one the CVX6 is a chain vice and stand all�

in one. It features a built in chain vice,pipe bending slots, pipe rest, ceiling brace

screw and hardened replaceable jaws. It is flat, simple and has up to 1.5 times more working surface than previous models.

Safe and Reliable operation made for outstanding �

durability and functionality, the CVX6 is designed with a die cast base offering robust reliability.

Bender effortlessly bends thin �

walled steel pipes up to ¾”Fold for storage�

PRODUCT CODE DESCRIPTION181C CHAIN VICE 1/8” - 2” (3mm-50mm) cap. 182C CHAIN VICE 1/8” - 4” (6mm-100mm) cap. 183C CHAIN VICE 1/2” - 8” (13mm-200mm) cap.

MID RANGE CHAIN VICES

Drop forged heat treated steel jaws�

Ideal for use in confined spaces�

Cast from S.G ductile iron�

Tube Bender Ceiling Brace Screw Tray Support

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


4.13 CHAIN VICESCONT

WRENCHES & VICES 14

PRODUCT CODE DESCRIPTIONRX120CVB CVX6 TRISTAND CHAIN VICE 1/8” - 6” REX

TRISTAND CHAIN VICE

All-in-one the CVX6 is a chain vice and stand all�

in one. It features a built in chain vice,pipe bending slots, pipe rest, ceiling brace

screw and hardened replaceable jaws. It is flat, simple and has up to 1.5 times more working surface than previous models.

Safe and Reliable operation made for outstanding �

durability and functionality, the CVX6 is designed with a die cast base offering robust reliability.

Bender effortlessly bends thin �

walled steel pipes up to ¾”Fold for storage�

PRODUCT CODE DESCRIPTION181C CHAIN VICE 1/8” - 2” (3mm-50mm) cap. 182C CHAIN VICE 1/8” - 4” (6mm-100mm) cap. 183C CHAIN VICE 1/2” - 8” (13mm-200mm) cap.

MID RANGE CHAIN VICES

Drop forged heat treated steel jaws�

Ideal for use in confined spaces�

Cast from S.G ductile iron�

Tube Bender Ceiling Brace Screw Tray Support

PLUMBOSS AUSTRALIA

15W

RENC

HES

& VI

CES

SERV

ING

AUST

RALI

A’SPL

UMBE

RSSI

NCE

1986

4.14 VICES

ENGINEERS AND MECHANICS VICES

Rigid and robust, the body and sliding jaw are cast from close grained grey iron, which is CNC machined on all friction surfaces for a smooth reliable action. The jaws, handle and main screw are made of steel. The main screw has a two start rolled acme thread to speed the jaws from shut to fully open, with a minimum of winding. Every line of the casting is focused on the point of maximum compression between the jaws. The lips on the front of the slide, and back of the body, guide filings and fragments away from the screw and friction pads. Swivel base vices feature new quick release, large anvil and built-in pipe jaws.

PRODUCT CODE DESCRIPTIONSTATIC BASE VICES

22/1 ENGINEERS VICE 75mm22/3 ENGINEERS VICE 100mm22/4 ENGINEERS VICE 115mm22/5 ENGINEERS VICE 125mm22/6 ENGINEERS VICE 150mm22/8 ENGINEERS VICE 205mm

OS150 OFFSET FABRICATED STEEL VICE 150mm

VICES WITH SWIVEL BASE & ANVIL 3TON3VSB SWIVEL BASE ENGINEERS VICE 100mm

3CA COMBINATION BENCH AND PIPE VICE 4½” (43.2KG)

OFF SET FABRICATED STEEL VICE

All steel heavy duty vice with off-set jaws

COMBINATION BENCH AND PIPE VICE (SWIVEL BASE)

Designed to provide decades of service, these cast vices carry REED’s lifetime warranty. Hardened steel pipe jaws made of heat treated hardened steel are reversible and replaceable and jaw facings are also replaceable. Vices are designed with maximum throat depth for greater clamping action to hold large parts. Forged steel, geared lock bolt on swivel base maintains positive lock to avoid slippage under heavy pressure.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


WRENCHES & VICES

16

4.15 PIPE JACKS

PRODUCT CODE DESCRIPTIONJHV V-HEAD HIGH JACK -24” cap. . JTA BALL TRANSFER HEAD ATTACHMENT (PAIR)

JH2R ROLLER HEAD HIGH JACK - 24” cap.

Convenient adjusting screw and a hardened steel locking ring are two features that make these 907 kg capacity JHV high jacks last for many years of use.

Patented design of 1” space below lock washer creates a safety area to eliminate pinched fingers and hand injuries during quick adjustments on head position.

Roller head jack (JH2R) has extra wide bearing for greater strength (907KG capacity) and tool life. Adjusting screw gives proper working height.

Outer surfaces are powder painted or zinc phosphate plated to resist corrosion. 454kg capacity ball transfer attachment (JTA) with replaceable ball casters bolts to either side of V-head. Ball transfer head attaches to Ridgid® models.

JHV JH2R

JTA

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


WRENCHES & VICES

16

4.15 PIPE JACKS

PRODUCT CODE DESCRIPTIONJHV V-HEAD HIGH JACK -24” cap. . JTA BALL TRANSFER HEAD ATTACHMENT (PAIR)

JH2R ROLLER HEAD HIGH JACK - 24” cap.

Convenient adjusting screw and a hardened steel locking ring are two features that make these 907 kg capacity JHV high jacks last for many years of use.

Patented design of 1” space below lock washer creates a safety area to eliminate pinched fingers and hand injuries during quick adjustments on head position.

Roller head jack (JH2R) has extra wide bearing for greater strength (907KG capacity) and tool life. Adjusting screw gives proper working height.

Outer surfaces are powder painted or zinc phosphate plated to resist corrosion. 454kg capacity ball transfer attachment (JTA) with replaceable ball casters bolts to either side of V-head. Ball transfer head attaches to Ridgid® models.

JHV JH2R

JTA

PLUMBOSS AUSTRALIA

17W

RENC

HES

& VI

CES

AUST

RALI

A’STR

USTE

DPL

UMBI

NGBR

AND

4.16 ROLLER PIPE STAND

PRODUCT CODE DESCRIPTIONRPS400 ROLLER STAND

4.17 FIELD PIPE VICE - REED

PRODUCT CODE DESCRIPTIONFPV20 FIELD PIPE VICE - 20” (500mm) cap. REED TUBE TUBE FOR LEGS AND BACKBONE

Holds pipe up to 20” (500mm) diameter �

More pipe capacity and greater strength than �

others, yet weighs only 10kg without legs Super choice for pre-trench work �

and above ground cuts

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


test plugs

5.1 MECHANICAL TEST PLUGS 2

5.2 PNEUMATIC TEST PLUGS 6

5.3 ACCESSORIES FOR PNEUMATIC PLUGS 8

5.4 DRAIN TEST CAPS 9

5

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


5.1 MECHANICAL TEST PLUGS

PRODUCT CODE DESCRIPTION HEAD OF PRESSURE

NOM. SIZE

269-840 KWIK ‘N SURE PLUGS 1/2” CHERNE 127m 3/8”269-867 KWIK ‘N SURE PLUGS 3/4” CHERNE 127m 5/8”269-875 KWIK ‘N SURE PLUGS 1” CHERNE 28m 1”

PRODUCT CODE DESCRIPTION MIN/MAX(mm)

BSP OUTLET SIZE

1½PS TEST PLUG PRESSED STEEL 1 1/2” (38mm) 36-48 ½”2PS TEST PLUG PRESSED STEEL 2” (50mm) 49-60 ½”

2½PS TEST PLUG PRESSED STEEL 2 1/2” (65mm) 61-75 ½”3PS TEST PLUG PRESSED STEEL 3” (75mm) 73-85 ½”4PS TEST PLUG PRESSED STEEL 4” (100mm) 94-110 ½”5PS TEST PLUG PRESSED STEEL 5” (125mm) 121-138 ½”6PS TEST PLUG PRESSED STEEL 6” (150mm) 146-163 ½”7PS TEST PLUG PRESSED STEEL 7”(175mm) 170 - 195 1”8PS TEST PLUG PRESSED STEEL 8” (200mm) 191-211 1”9PS TEST PLUG PRESSED STEEL 9” (225mm) 216-235 1”10PS TEST PLUG PRESSED STEEL 10” (250mm) 244-260 1”12PS TEST PLUG PRESSED STEEL 12” (300mm) 296-314 1”15PS TEST PLUG PRESSED STEEL 15” (375mm) 365-400 1”18PS TEST PLUG PRESSED STEEL 18” (450mm) 440-475 1”

KWIK ‘N SURE PLUGSFor temporary shut-off of tubing without pinching it off or installing a valve. Kwik’n’Sure plugs are especially handy for plumbing, heating, refrigeration and instrumentation when trouble-shooting for leaks. Synthetic rubber expands to seal tube and holds up to 100psi.

PRESSED STEEL TEST PLUGS Single Seal - 1 1/2” up to 18”

5% DISCOUNT FOR 10 OR MORE ASSORTED TEST PLUGS

TEST PLUGS2

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


5.1 MECHANICAL TEST PLUGS

PRODUCT CODE DESCRIPTION HEAD OF PRESSURE

NOM. SIZE

269-840 KWIK ‘N SURE PLUGS 1/2” CHERNE 127m 3/8”269-867 KWIK ‘N SURE PLUGS 3/4” CHERNE 127m 5/8”269-875 KWIK ‘N SURE PLUGS 1” CHERNE 28m 1”


BSP OUTLET SIZE

1½PS TEST PLUG PRESSED STEEL 1 1/2” (38mm) 36-48 ½”2PS TEST PLUG PRESSED STEEL 2” (50mm) 49-60 ½”

2½PS TEST PLUG PRESSED STEEL 2 1/2” (65mm) 61-75 ½”3PS TEST PLUG PRESSED STEEL 3” (75mm) 73-85 ½”4PS TEST PLUG PRESSED STEEL 4” (100mm) 94-110 ½”5PS TEST PLUG PRESSED STEEL 5” (125mm) 121-138 ½”6PS TEST PLUG PRESSED STEEL 6” (150mm) 146-163 ½”7PS TEST PLUG PRESSED STEEL 7”(175mm) 170 - 195 1”8PS TEST PLUG PRESSED STEEL 8” (200mm) 191-211 1”9PS TEST PLUG PRESSED STEEL 9” (225mm) 216-235 1”10PS TEST PLUG PRESSED STEEL 10” (250mm) 244-260 1”12PS TEST PLUG PRESSED STEEL 12” (300mm) 296-314 1”15PS TEST PLUG PRESSED STEEL 15” (375mm) 365-400 1”18PS TEST PLUG PRESSED STEEL 18” (450mm) 440-475 1”

KWIK ‘N SURE PLUGSFor temporary shut-off of tubing without pinching it off or installing a valve. Kwik’n’Sure plugs are especially handy for plumbing, heating, refrigeration and instrumentation when trouble-shooting for leaks. Synthetic rubber expands to seal tube and holds up to 100psi.

PRESSED STEEL TEST PLUGS Single Seal - 1 1/2” up to 18”

5% DISCOUNT FOR 10 OR MORE ASSORTED TEST PLUGS

TEST PLUGS2

PLUMBOSSAUSTRALIA


BSP OUTLET SIZE

4DS TEST PLUG DOUBLE SEAL 4” (100mm) 94 - 110 ½”6DS TEST PLUG DOUBLE SEAL 6” (150mm) 146 - 163 ½”8DS TEST PLUG DOUBLE SEAL 8” (200mm) 191 - 211 1”9DS TEST PLUG DOUBLE SEAL 9” (225mm) 216 - 235 1”

10DS TEST PLUG DOUBLE SEAL 10” (250mm) 244 - 260 1”12DS TEST PLUG DOUBLE SEAL 12” (300mm) 296 - 314 1”15DS TEST PLUG DOUBLE SEAL 15” (375mm) 365 - 400 1”

5.1 MECHANICAL TEST PLUGSCONT

DOUBLE SEAL TEST PLUGS

For uneven wall surfaces, ensures squarer seal. 4” – 15”

3 TE

STPL

UGS

SERV

ING

AUST

RALI

A’STR

ADES

MEN

SINC

E 19

86

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



TESTPLUGS

4


BSP OUTLET SIZE

PSBW-6 PLUG SAFE SPT TEST PLUG ADAPTOR N/A N/APSBW-4PS PLUG SAFE WITH 4” TEST PLUG 94 - 110 ½”PSBW-6PS PLUG SAFE WITH 6” TEST PLUG 146 - 163 ½”PLUGDISP PLUG SAFE DISPLAY N/A N/A

PLUG SAFE

How many test plugs have you lost down the drain?

Due to Plug Safe’s unique design, you will not lose your test plug any more.

Made of Zinc-plated steel �

Preventative measure to save the knuckles �

and wrists from cuts and abrasions Grips twice as tight �

Suits 40mm-150mm Pressed Steel Test Plugs �

and can be adapted to suit Aluminium Test Plugs


BSP OUTLET SIZE

1½AL TEST PLUG ALUMINIUM 1 ½” (38mm) 36 - 48 ½”2AL TEST PLUG ALUMINIUM 2” (50mm) 49 - 60 ½”

2½AL TEST PLUG ALUMINIUM 2 ½” (65mm) 61 - 75 ½”3AL TEST PLUG ALUMINIUM 3” (75mm) 73 - 85 ½”4AL TEST PLUG ALUMINIUM 4” (100mm) 94 - 110 ½”6AL TEST PLUG ALUMINIUM 6” (150mm) 146 - 163 ½”

21AL TEST PLUG ALUMINIUM 21” (525mm) 520 - 555 2”24AL TEST PLUG ALUMINIUM 24” (600mm) 590 - 630 2”48AL TEST PLUG ALUMINIUM 48” (1200mm) ≈ 47½” – 48½” 2”

ALUMINIUM TEST PLUGS

For sealing when testing pipe lines from 1 1/2” up to 48” PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



TESTPLUGS

4


BSP OUTLET SIZE

PSBW-6 PLUG SAFE SPT TEST PLUG ADAPTOR N/A N/APSBW-4PS PLUG SAFE WITH 4” TEST PLUG 94 - 110 ½”PSBW-6PS PLUG SAFE WITH 6” TEST PLUG 146 - 163 ½”PLUGDISP PLUG SAFE DISPLAY N/A N/A

PLUG SAFE

How many test plugs have you lost down the drain?

Due to Plug Safe’s unique design, you will not lose your test plug any more.

Made of Zinc-plated steel �

Preventative measure to save the knuckles �

and wrists from cuts and abrasions Grips twice as tight �

Suits 40mm-150mm Pressed Steel Test Plugs �

and can be adapted to suit Aluminium Test Plugs


BSP OUTLET SIZE

1½AL TEST PLUG ALUMINIUM 1 ½” (38mm) 36 - 48 ½”2AL TEST PLUG ALUMINIUM 2” (50mm) 49 - 60 ½”

2½AL TEST PLUG ALUMINIUM 2 ½” (65mm) 61 - 75 ½”3AL TEST PLUG ALUMINIUM 3” (75mm) 73 - 85 ½”4AL TEST PLUG ALUMINIUM 4” (100mm) 94 - 110 ½”6AL TEST PLUG ALUMINIUM 6” (150mm) 146 - 163 ½”

21AL TEST PLUG ALUMINIUM 21” (525mm) 520 - 555 2”24AL TEST PLUG ALUMINIUM 24” (600mm) 590 - 630 2”48AL TEST PLUG ALUMINIUM 48” (1200mm) ≈ 47½” – 48½” 2”

ALUMINIUM TEST PLUGS

For sealing when testing pipe lines from 1 1/2” up to 48”

PLUMBOSSAUSTRALIA


5 TE

STPL

UGS

PLUM

BOSS

- AU

STRA

LIA’S

OW

NPL

UMBI

NGTO

OLSP

ECIA

LIST

S


BSP OUTLET SIZE

3NYL TEST PLUG NYLON 3” (75mm) 74-87 ½”4NYL TEST PLUG NYLON 4” (100mm) 97-107 ½”6NYL TEST PLUG NYLON 6” (150mm) 149-165 ½”

NYLON TEST PLUGS

PRODUCT CODE DESCRIPTION1½RO TEST PLUG RUBBER ONLY 1 ½” (38mm) 2RO TEST PLUG RUBBER ONLY 2” (50mm)

2½RO TEST PLUG RUBBER ONLY 2 ½” (65mm) 3RO TEST PLUG RUBBER ONLY 3” (75mm)4RO TEST PLUG RUBBER ONLY 4” (100mm)6RO TEST PLUG RUBBER ONLY 6” (150mm)8RO TEST PLUG RUBBER ONLY 8” (200mm)9RO TEST PLUG RUBBER ONLY 9” (225mm)

TEST PLUG RUBBERS ONLY (REPLACEMENT RUBBERS)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


5.2 PNEUMATIC TEST PLUGS

TESTPLUGS

6PRODUCT

CODEDESCRIPTION MIN /MAX

(mm)HEAD

PRESSUREREQUIREDINFLATION PRESSURE

270-024 TEST BALL 2” (50mm) 48 - 57 9.1m 40 psi, (2.8bar)270-032 TEST BALL 3” (75mm) 70 - 83 9.1m 35 psi, (2.4bar)270-040 TEST BALL 4” (100mm) 87 - 108 9.1m 30 psi, (2.1bar)270-059 TEST BALL 5” (125mm) 117 - 133 9.1m 30 psi, (2.1bar)270-067 TEST BALL 6” (150mm) 138 - 159 9.1m 30 psi, (2.1bar)041-386 TEST BALL 8” (200mm) 178 - 210 12m 25 psi, (1.7bar)041-394 TEST BALL 10” (250mm) 229 - 260 12m 25 psi, (1.7bar)041-408 TEST BALL 12” (300mm) 267 - 311 12m 25 psi, (1.7bar)

MULTI SIZE TEST BALLS270-016 TEST BALL 1 1/4”-1 1/2” (30-40mm) 30 - 44 9.1m 40 psi, (2.8bar)276-348 TEST BALL 3” – 4” (75-100mm) 70 - 104 12m 40 psi, (2.8bar)

SINGLE SIZE & MULTI SIZE TEST BALL - CHERNEThe Test Ball Plug is very easy to use in a wide variety of applications because of their “flexible” sealing design, they easily overcome some common problems like out of round pipe and pipe with slightly differing interior dimensions. CHERNE Test Ball Plugs are recommended for use in piping constructed of ABS, cast iron, clay, concrete, copper or PVC.

The 1 ¼” through 6” Test Ball sizes are made of natural rubber and feature a removable zinc-plated steel chain, clamp and ring. The inflator is moulded-in and has a standard tyre valve thread with cap. The 8” through to 12” Test Ball sizes are made of natural rubber and feature a moulded-in metal insert which serves as a base plate for the removable 3/8”-16 threaded zinc-plated eyebolt and ¼”-18NPT (F) threaded inflation nipple. The inflation fitting has a standard tyre valve thread with cap.

Closet Bend Floor Drain Roof Vent

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


5.2 PNEUMATIC TEST PLUGS

TESTPLUGS

6

PRODUCTCODE

DESCRIPTION MIN /MAX(mm)

HEADPRESSURE

REQUIREDINFLATION PRESSURE

270-024 TEST BALL 2” (50mm) 48 - 57 9.1m 40 psi, (2.8bar)270-032 TEST BALL 3” (75mm) 70 - 83 9.1m 35 psi, (2.4bar)270-040 TEST BALL 4” (100mm) 87 - 108 9.1m 30 psi, (2.1bar)270-059 TEST BALL 5” (125mm) 117 - 133 9.1m 30 psi, (2.1bar)270-067 TEST BALL 6” (150mm) 138 - 159 9.1m 30 psi, (2.1bar)041-386 TEST BALL 8” (200mm) 178 - 210 12m 25 psi, (1.7bar)041-394 TEST BALL 10” (250mm) 229 - 260 12m 25 psi, (1.7bar)041-408 TEST BALL 12” (300mm) 267 - 311 12m 25 psi, (1.7bar)

MULTI SIZE TEST BALLS270-016 TEST BALL 1 1/4”-1 1/2” (30-40mm) 30 - 44 9.1m 40 psi, (2.8bar)276-348 TEST BALL 3” – 4” (75-100mm) 70 - 104 12m 40 psi, (2.8bar)

SINGLE SIZE & MULTI SIZE TEST BALL - CHERNEThe Test Ball Plug is very easy to use in a wide variety of applications because of their “flexible” sealing design, they easily overcome some common problems like out of round pipe and pipe with slightly differing interior dimensions. CHERNE Test Ball Plugs are recommended for use in piping constructed of ABS, cast iron, clay, concrete, copper or PVC.

The 1 ¼” through 6” Test Ball sizes are made of natural rubber and feature a removable zinc-plated steel chain, clamp and ring. The inflator is moulded-in and has a standard tyre valve thread with cap. The 8” through to 12” Test Ball sizes are made of natural rubber and feature a moulded-in metal insert which serves as a base plate for the removable 3/8”-16 threaded zinc-plated eyebolt and ¼”-18NPT (F) threaded inflation nipple. The inflation fitting has a standard tyre valve thread with cap.

Closet Bend Floor Drain Roof Vent

PLUMBOSSAUSTRALIA

7 TE

STPL

UGS

AUST

RALI

A’S T

RUST

ED P

LUMB

ING

TOOL

BRAN

D

ATTACHMENT REQUIRED FOR AIR TESTING

5.2 PNEUMATIC TEST PLUGS CONT

PRODUCTCODE

DESCRIPTION MIN/MAX(mm)

HEADPRESSURE

REQUIREDINFLATION PRESSURE

262-048 MUNI-BALL 4” (100mm) 83 - 108 15m 40 psi, (2.8bar)262-064 MUNI-BALL 6” (150mm) 114 - 159 9.1m 35 psi, (2.4bar)262-080 MUNI-BALL 8” (200mm) 178 - 210 9.1m 35 psi, (2.4bar)262-110 MUNI-BALL 10” (250mm) 229 - 260 9.1m 35 psi, (2.4bar)262-129 MUNI-BALL 12” (300mm) 267 - 311 9.1m 35 psi, (2.4bar)

MULTI SIZE MUNI BALLS265 - 098 MUNI BALL 8” - 12” (200mm - 300mm) 178 - 311 12m 25 psi, (1.7bar)265 - 128 MUNI BALL 12” - 18” (300mm - 450mm) 273 - 477 9.1m 25 psi (1.7 bar)262 - 668 MUNI BALL 15” - 30” (375mm - 750mm) 368 - 775 7.6 - 12m 25 psi (1.7 bar)

SINGLE SIZE AND MULTI SIZE MUNI-BALL - CHERNESingle size Muni-Ball Plugs feature a flow thru and can be used for wide variety of applications such as Line Acceptance Test and by- passing Sewer Flow.

Unlike mechanical plugs, the single-size Muni-Ball can seal out of round pipe, plug virtually all pipe types and keep the user safe and dry. Single size Muni-Ball Plugs are made out of natural rubber and feature an aluminium by-pass tube. The tyre valve inflation fitting is moulded into the 2”, 3” and 4” plugs. Larger sizes have a removable tyre valve inflation fitting. By-pass allows for pressure and vacuum testing of drains.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



5.3 ACCESSORIES FOR PNEUMATIC TEST PLUGS

TESTPLUGS

8

CANVAS TEST BAGSFeatures:

Canvas Outer Casing with rubber bladder inside �

4’ (1200mm) Rubber Hose.�

Standard tyre valve hose fitting.�

Not for use where rubber test ball can be used. �

Designed for use where the diameter �

of inspection opening is less than the internal diameter of pipe to be tested.

PRODUCT CODE DESCRIPTION RECOMMENDED INFLATION PRESSURE

4CTB CANVAS TEST BAG 4” (100mm) 10psi6CTB CANVAS TEST BAG 6” (150mm) 6psi

PRODUCT CODE DESCRIPTIONCEH5 EXTENSION HOSE 5’ (1.5m*) *Can be made up to any length POA

273-958 HAND PUMP – CHERNEFPG01 FOOT PUMP WITH GAUGE

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



5.3 ACCESSORIES FOR PNEUMATIC TEST PLUGS

TESTPLUGS

8

CANVAS TEST BAGSFeatures:

Canvas Outer Casing with rubber bladder inside �

4’ (1200mm) Rubber Hose.�

Standard tyre valve hose fitting.�

Not for use where rubber test ball can be used. �

Designed for use where the diameter �

of inspection opening is less than the internal diameter of pipe to be tested.

PRODUCT CODE DESCRIPTION RECOMMENDED INFLATION PRESSURE

4CTB CANVAS TEST BAG 4” (100mm) 10psi6CTB CANVAS TEST BAG 6” (150mm) 6psi

PRODUCT CODE DESCRIPTIONCEH5 EXTENSION HOSE 5’ (1.5m*) *Can be made up to any length POA

273-958 HAND PUMP – CHERNEFPG01 FOOT PUMP WITH GAUGE

PLUMBOSSAUSTRALIA


9 TE

STPL

UGS

THE

TUBE

AND

PIPE

SPEC

IALI

STS

5.4 DRAIN TEST CAPS

Made of flexible PVC�

Stainless Steel hose clamp�

Have a reinforced cross moulded into �

the top, increasing the strength.

It can be used on plastic, steel, �

copper and cast iron.

PRODUCT CODE DESCRIPTION270-725 1 ½” DRAIN TEST CAP270-733 2” DRAIN TEST CAP270-741 3” DRAIN TEST CAP270-768 4” DRAIN TEST CAP270-784 6” DRAIN TEST CAP

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


6draincleaning

6.1 DIAGNOSTIC INSPECTION CAMERAS 2

6.2 DRAIN CLEANING EQUIPMENT - POWER OPERATED 3

6.3 HAND OPERATED TOP SNAKES 11

6.4 SNAP LOK SEWER RODS & ACCESSORIES 12

6.5 COIL SPRING DRAIN RODS & ACCESSORIES 14

6.6 POLYPROPYLENE RODS & ACCESSORIES 15

6.7 STEELFLEX RODS & ACCESSORIES 16

6.8 POWA PLUNGA 18

6.9 GULLY SCOOPS 19

6.10 EXTENDASCOPE CLOSET AUGER 20

6.11 KINO 10 KINETIC WATER RAM 21

6.12 KYCO20 KYNA-COLT BLOCKAGE GUN 21

6.13 CLOG BUSTER 22

6.14 DRAIN RAT 22

6.15 SINK PLUNGERS 23

6.16 DRAIN TRACING DYE 23

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


6.1 DIAGNOSTIC INSPECTION CAMERAS

PRODUCT CODE DESCRIPTIONRX440352 G-LINE SCOPE GLS2830 DIAGNOSTIC INSPECTION CAMERARX424954 G-LINE SCOPE BATTERYRX424960 G-LINE SCOPE CHARGERRX440364 G-LINE SCOPE BATTERY ADAPTORRX440366 G-LINE SCOPE 4” (100mm) SKIDRX440368 G-LINE SCOPE 6” (150mm) SKID

DIAGNOSTIC INSPECTION CAMERASThe G-line Scope diagnostic inspection camera can be used for all kinds of pipe inspections, structural inspections and air conditioning inspections. It incorporates camera, cable, monitor and drum in a single unit that weighs only 5.0kg!

THE MONITOR is a 5.5” TFT colour high luminosity LCD screen. The monitor displays cable extension lengths in 0.1m increments and folds down for increased portability.

THE CAMERA CABLE has a core of fibre reinforced plastic (FRP) for ideal rigidity and flexibility. Rigid enough to push down into the pipe yet flexible enough to negotiate bends.

THE CAMERA HEAD construction means it can pass through curved pipe as small as 40mm diameter. The camera head is waterproof up to 10m and comes with a shatter proof, scratch resistant sapphire glass lens cover. Its optical system uses an ultra-wide objective lens with a field vision of approximately 160˚, allowing it to capture a clear view of the sides of the pipe wall even when facing directly ahead. This combined with the use of high luminosity white LED’s as a light source increases the efficiency of any inspection.

THE (OPTIONAL) BATTERY allows you to use the G-Line Scope for up to 2hrs when no other power source is available.

THE (OPTIONAL) SKIDS keep the camera centred when inspecting either 4” (100mm) or 6” (150mm) diameter pipe.

DRAINCLEANING

2PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


6.1 DIAGNOSTIC INSPECTION CAMERAS

PRODUCT CODE DESCRIPTIONRX440352 G-LINE SCOPE GLS2830 DIAGNOSTIC INSPECTION CAMERARX424954 G-LINE SCOPE BATTERYRX424960 G-LINE SCOPE CHARGERRX440364 G-LINE SCOPE BATTERY ADAPTORRX440366 G-LINE SCOPE 4” (100mm) SKIDRX440368 G-LINE SCOPE 6” (150mm) SKID

DIAGNOSTIC INSPECTION CAMERASThe G-line Scope diagnostic inspection camera can be used for all kinds of pipe inspections, structural inspections and air conditioning inspections. It incorporates camera, cable, monitor and drum in a single unit that weighs only 5.0kg!

THE MONITOR is a 5.5” TFT colour high luminosity LCD screen. The monitor displays cable extension lengths in 0.1m increments and folds down for increased portability.

THE CAMERA CABLE has a core of fibre reinforced plastic (FRP) for ideal rigidity and flexibility. Rigid enough to push down into the pipe yet flexible enough to negotiate bends.

THE CAMERA HEAD construction means it can pass through curved pipe as small as 40mm diameter. The camera head is waterproof up to 10m and comes with a shatter proof, scratch resistant sapphire glass lens cover. Its optical system uses an ultra-wide objective lens with a field vision of approximately 160˚, allowing it to capture a clear view of the sides of the pipe wall even when facing directly ahead. This combined with the use of high luminosity white LED’s as a light source increases the efficiency of any inspection.

THE (OPTIONAL) BATTERY allows you to use the G-Line Scope for up to 2hrs when no other power source is available.

THE (OPTIONAL) SKIDS keep the camera centred when inspecting either 4” (100mm) or 6” (150mm) diameter pipe.

DRAINCLEANING

2PLUMBOSS

AUSTRALIA

PRODUCT CODE DESCRIPTIONMPF8080 DRAIN CLEANINGMACHINE COMPLETE 8122

6.2 DRAIN CLEANING EQUIPMENT - POWER OPERATED

MPF8080 is equipped with Australian 1/2HP electric motor and Drum Brake Control. Interchangeable 432 Cartridge Drum will hold ¾” x 50’ or 75’ cable. Enclosed drum is designed to resist cable torque conditions. It features Forward and Reverse Dual feed, Foot Switch, Safety Spring Guide and Snap-Lock couplings for quick head and cable attachment. It can feed 0-22 feet (approx. 0 - 6.5m) per minute.

For use in drains 3”- 8” in �

diameter and up to 76m long

Supplied with ¾” x 75’ (22m) continuous �

Plasticore Cable which allows for a 75’ (22m) run without stopping to add extra cable. (Covers most suburban jobs)

Automatic Dual feed unit maintains a safe �

forward and reverse cable feed of 0-22 feet per minute without altering cable rotation direction, whilst clearing drains. i.e.: cutters rotate forward when inserting and retracting cable in drains.

MPF8080-STANDARD EQUIPMENT SUPPLIED: 1/2 HP Electric Motor and Footswitch Dual Feed Unit No.1 Headset (see below) Tool Box Operation Manual

CONTENTS OF NO.1 HEADSET: 1 - #20 3” Cutter 1 - #21 4” Cutter 1 - #22 6” Cutter 1 - #23 Spear Fin 1 - #24 Retriever 1 - #25 Auger 1 - #307 Root Cutter

3 DR

AIN

CLEA

NING

SERV

ING

AUST

RALI

A’STR

ADES

MEN

SINC

E 19

86

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


6.2 DRAIN CLEANING EQUIPMENT - POWER OPERATEDCONT

SPARE PARTS - MPF8080

DRAINCLEANING

4

SPARE PARTS FOR MPF8080 CONTINUED ON NEXT PAGE

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



SPARE PARTS - MPF8080

DRAINCLEANING

4

SPARE PARTS FOR MPF8080 CONTINUED ON NEXT PAGE

PLUMBOSSAUSTRALIA

5 DR

AIN

CLEA

NING

PLUM

BOSS

- AU

STRA

LIA’S

OWN

PLUM

BING

TOOL

SPEC

IALI

STS


PRODUCT CODE KEY DESCRIPTIONMDFC 1 DUALFEED UNIT COMPLETE 6588 M750 2 750 SPRING GUIDE 8337

MN7362 4 DRUM BRAKE LEVER COMPLETE 9199MN7362A BRAKE LEVER TRIGGER ONLY 9200

MN7275 5 DRUM LEADER 5’ 8799MN702R 6 FEED MOUNT 8966MN729 7 FRONT BEARING MOUNT 8977MN707 8 SWING BEARING 8955

MN707A TENSION SPRING SWING BEARING 8956

MN37 9 TORQUE TUBE COMPLETE 8733MN37A BRONZE BEARING TORQUE TUBE 8754

MN37AOS BRONZE BEARING TORQUE TUBE OLD STYLE

MN37B RETAINER CLIP BRONZE BEARING 8755

MN37BOS RETAINER CLIP BRONZE BEARING OLD STYLE

MN731 10 REAR BEARING MOUNT ONLY 9066MN711A SPINDLE BEARING

MN711B SPINDLE WITH NUT 9088

MN703 11 REAR HANDLE MOUNT 9055MN7AC 12 AXLE CAP 8766

MN7068B 13 WHEEL 8”MN7066 WHEEL 6” LOADING

MN704 14 RIGHT AXLE MOUNT 9011MN730 15 LEFT AXLE MOUNT 9044

MN7365 16 CABLE DRUM BRAKE 9244MCMG12 17 ELECTRIC MOTOR 1/2HP WIREDMN716 18 MOTOR MOUNT COMPLETE 9111M712 20 HANDLE COMPLETE WITH WHEEL 9177

MP120 21 SHEAVE PULLEY GUARD 8700MN36 22 VEE BELT

MN713 23 BACK DRUM CASTING SET 8900MN715 24 DRUM RING 8788M606 26 CAM LOCK PIN 9277

M606OS CAM LOCK PIN OLD STYLE 9787

M119 27 SPLASH COVER 8699MN736 28 DRUM BRAKE ASSEMBLY 9188

MN7363 BRAKE ARM AND SHOE 9211

MN7364 BRAKE ADJUSTOR 9222

MN7366 BRAKE SPRING

MN737 36 PULLEY SMALL - DRIVEMN737B PULLEY LARGE - BRAKE

SPARE PARTS - MPF8080 (cont)

SEE PREVIOUS PAGE FOR DIAGRAM OF SPARE PARTS FOR MPF8080

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



PRODUCT CODE DESCRIPTIONMDFC DUAL FEED UNIT COMPLETE 6588 MDFB DUAL FEED BODY CASTING 9800

MRS1 CAM PLATE CASTING 9801MRS2 CAM PLATE LOCKING RING 9802MRS3 HANDLE FOR CAM PLATE 9803MRS4 HANDLE FOR TOP CAP CAM 9804MRS5 TOP “ADJUSTING” CAP 9805MRS6 SPRING & CAM PLUNGER SET 9806MRS7 WASHER FOR MRS9 HOLDER 9807MRS8 BEARING FOR MRS9 HOLDER 9808MRS9 TOP ROLLER HOLDER ASSEMBLY COMPLETE 9809MRS10 BOTTOM ADJUSTING CAP BOLT 9810MRS11 WASHER FOR MRS13 HOLDER 9811MRS12 BEARING FOR MRS13 HOLDER 9812MRS13 BOTTOM ROLLER HOLDER ASSEMBLY COMPLETE 9813MRS14 BOTTOM ROLLER HEAD 9814MRS15 ROLLER SMOOTH FORMED 9815MRS16 AXLE FOR MRS15 9816MRS17 BOTTOM CAM PIN 9817MRS18 TOP ROLLER HOLDER 9818MRS19 TOP CAM KNOB PIN 9818MRS20 CAM RETAINER PLATE 9832MFM1 FEED MOUNT BLOCK 9820MFM2 MOUNT BLOCK W/-WASHER 9821M750 750 SPRING GUIDE 8337

DUAL FEED PARTS BREAKDOWN - MPF8080

DRAINCLEANING

6PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



PRODUCT CODE DESCRIPTIONMDFC DUAL FEED UNIT COMPLETE 6588 MDFB DUAL FEED BODY CASTING 9800

MRS1 CAM PLATE CASTING 9801MRS2 CAM PLATE LOCKING RING 9802MRS3 HANDLE FOR CAM PLATE 9803MRS4 HANDLE FOR TOP CAP CAM 9804MRS5 TOP “ADJUSTING” CAP 9805MRS6 SPRING & CAM PLUNGER SET 9806MRS7 WASHER FOR MRS9 HOLDER 9807MRS8 BEARING FOR MRS9 HOLDER 9808MRS9 TOP ROLLER HOLDER ASSEMBLY COMPLETE 9809

MRS10 BOTTOM ADJUSTING CAP BOLT 9810MRS11 WASHER FOR MRS13 HOLDER 9811MRS12 BEARING FOR MRS13 HOLDER 9812MRS13 BOTTOM ROLLER HOLDER ASSEMBLY COMPLETE 9813MRS14 BOTTOM ROLLER HEAD 9814MRS15 ROLLER SMOOTH FORMED 9815MRS16 AXLE FOR MRS15 9816MRS17 BOTTOM CAM PIN 9817MRS18 TOP ROLLER HOLDER 9818MRS19 TOP CAM KNOB PIN 9818MRS20 CAM RETAINER PLATE 9832MFM1 FEED MOUNT BLOCK 9820MFM2 MOUNT BLOCK W/-WASHER 9821M750 750 SPRING GUIDE 8337

DUAL FEED PARTS BREAKDOWN - MPF8080

DRAINCLEANING

6PLUMBOSS

AUSTRALIA


7 DR

AIN

CLEA

NING

AUST

RALI

A’STR

USTE

DPL

UMBI

NGTO

OLBR

AND

PRODUCT CODE DESCRIPTIONMMP718 FORWARD/REVERSE SWITCH MMP719 FOOTSWITCH (UNWIRED)

MMPFC FAN COWL- CMG MMPFA FAN - CMG

MMPCCB CAPACITOR COVERBASE — CMG MMPCCO CAPACITOR COVER

PRODUCT CODE DESCRIPTIONM3450 CORE CABLE C3/4” x 50’ 8266 M3475 CORE CABLE C3/4” X 75’ 8288

M728M MALE COUPLING-3/4” Cable 8399 M728F FEMALE COUPLING—3/4” Cable 8511 M728S SPLICE COUPLING—3/4” Cable 8522

M728TH TEE HANDLE - REPAIR M432 DRUM WITH 5’ LEADER 8355

MOTOR SPARE PARTS - MPF8080

CABLES & ACCESSORIES - MPF8080

MMP718

M728 COUPLINGS TEE HANDLE M432 (5’ LEADER NOT PICTURED)

MMPFA MMPCCO/MMPCCB

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



PRODUCT CODE DESCRIPTIONMC20 OPEN CUTTER #20 3” 8533 MC21 OPEN CUTTER #21 411 8544

MC22 OPEN CUTTER #22 6” 8555 MC23 SPEAR FIN HEAD #23 8566 MC24 RETRIEVER HEAD #24 8577 MC25 AUGER HEAD #25 8588

MC24OS RETRIEVER HEAD OLD STYLE MC307 ROOT CUTTER #307 8599MC308 SAW CUTTER #308 8611MC312 TRAP LEADER #312 4” 8655

MCP20A CUTTER BLADES & PIN (PAIR) 3” 9793MCP21A CUTTER BLADES & PIN (PAIR) 4” 9794MCP22A CUTTER BLADES & PIN (PAIR) 6” 9795MCP23A SPEAR FIN BLADE & PIN 9796

MCP307A ROOT CUTTER BLADE & PIN 9797

DRAIN CLEANING GLOVESMDCG10 DRAIN CLEANING GLOVES (PAIR) 10”MDCG24 DRAIN CLEANING GLOVES (PAIR) 24”SGLH1 STUDDED GLOVE - LEFT HANDSGRH2 STUDDED GLOVE - RIGHT HAND

CUTTERS & ACCESSORIES - MPF8080

OPEN CUTTER

ROOT CUTTER

DRAIN CLEANING GLOVES

RETRIEVER HEAD

TRAP LEADER

AUGER HEAD

STUDDED GLOVE

SPEAR FIN HEAD SAW CUTTER

DRAINCLEANING

8PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



PRODUCT CODE DESCRIPTIONMC20 OPEN CUTTER #20 3” 8533 MC21 OPEN CUTTER #21 411 8544

MC22 OPEN CUTTER #22 6” 8555 MC23 SPEAR FIN HEAD #23 8566 MC24 RETRIEVER HEAD #24 8577 MC25 AUGER HEAD #25 8588

MC24OS RETRIEVER HEAD OLD STYLE MC307 ROOT CUTTER #307 8599MC308 SAW CUTTER #308 8611MC312 TRAP LEADER #312 4” 8655

MCP20A CUTTER BLADES & PIN (PAIR) 3” 9793MCP21A CUTTER BLADES & PIN (PAIR) 4” 9794MCP22A CUTTER BLADES & PIN (PAIR) 6” 9795MCP23A SPEAR FIN BLADE & PIN 9796

MCP307A ROOT CUTTER BLADE & PIN 9797

DRAIN CLEANING GLOVESMDCG10 DRAIN CLEANING GLOVES (PAIR) 10”MDCG24 DRAIN CLEANING GLOVES (PAIR) 24”SGLH1 STUDDED GLOVE - LEFT HANDSGRH2 STUDDED GLOVE - RIGHT HAND

CUTTERS & ACCESSORIES - MPF8080

OPEN CUTTER

ROOT CUTTER

DRAIN CLEANING GLOVES

RETRIEVER HEAD

TRAP LEADER

AUGER HEAD

STUDDED GLOVE

SPEAR FIN HEAD SAW CUTTER

DRAINCLEANING

8PLUMBOSS

AUSTRALIA

9 DR

AIN

CLEA

NING

THE

TUBE

& P

IPE

TOOL

SPEC

IALI

STS


PRODUCT CODE DESCRIPTIONKA200 BARREL TYPE DRAIN CLEANING MACHINERC15 CABLE 1¼” x 15’ FOR BARREL TYPE DRAIN CLEANER

RCC CABLE CARRIER

CUTTERS AND ACCESSORIES FOR BARREL TYPE DRAIN CLEANERRRC1 HEAVY DUTY ROOT SAWRU80 U-TYPE CUTTER 80mm

RU100 U-TYPE CUTTER 100mmRU150 U-TYPE CUTTER 150mmRSP1 SPADE CUTTERRRT1 RETRIEVERRFD1 FUNNEL DRILLRSD1 STRAIGHT DRILL

SGLH1 STUDDED GLOVE - LEFT HANDSGRH2 STUDDED GLOVE - RIGHT HAND

BARREL TYPE DRAIN CLEANING MACHINE

KA200 CUTTERS

The KA200 is applicable for all kinds of outdoor pipes of 50 – 200mm. It can clean lengths of pipe up to 50 metres long!

Accessories mounted on side of machine�

The 32mm sectional helical flexible�

shafts can be added toRotational speeds up to 700rpm at the press of a lever�

Input power: 1100W�

Rated Voltage: 240V�

This unit comes complete with:Power unit4x 4.6m cable of 32mm CableCable HolderRoot SawU-Type CutterSpade CutterRetrieverFunnel DrillStraight DrillGlovesProtection Tube

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



PRODUCT CODE DESCRIPTIONMH500C25 POWERPLUS H500 C3/8” x 25’ w/-HEADSET 1429 MH500C35 POWERPLUS H500 C3/8” x 35’ w/-HEADSET 1430

MP1405C25 PRO-PAK AUTO FEED C3/8” X 25’ w/-HEADSET 1405

REFILL CABLES AND SPARE CUTTER HEADSMCC3825 CABLE C3/8” x 25’ 5710 MCC3835 CABLE C3/8” x 35’ 5720 MCBH38 BORE HEAD C3/8” SNAP-LOCK 5199 MCDH38 DROP HEAD C3/8” SNAP-LOCK 5211 MCCH38 CUTTER HEAD C3/8” SNAP-LOCK 5222 MC38M MALE COUPLING C3/8” SNAP-LOCK 5233 MC38F FEMALE COUPLING C3/8” SNAP LOCK 5244

POWER PLUS UNITSThe POWERPLUS H500 and PRO-PAK operate with any standard hand drill 3/8” or 1/2” at variable speeds up to 1300 RPM (maximum). Just chuck drill motor to the unit and operate. It is also furnished with Hand Crank for use when power is not available. It operates in traps and 40mm lines with ¼” x 25ft or 35ft cable, or, in 40mm – 63mm lines with 3/8” x 25ft or 35ft cable. Both units come complete with cable, bore head, cutter head and drop head.

Motor is not included.

The PRO-PAK Auto Feed features Squeeze Ease chucking for automatic dispensing of cable down the drain.

PRO-PAK AUTO FEED

BORE HEAD

CUTTER HEAD

DROP HEADDRAIN

CLEANING 10

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



PRODUCT CODE DESCRIPTIONMH500C25 POWERPLUS H500 C3/8” x 25’ w/-HEADSET 1429 MH500C35 POWERPLUS H500 C3/8” x 35’ w/-HEADSET 1430

MP1405C25 PRO-PAK AUTO FEED C3/8” X 25’ w/-HEADSET 1405

REFILL CABLES AND SPARE CUTTER HEADSMCC3825 CABLE C3/8” x 25’ 5710 MCC3835 CABLE C3/8” x 35’ 5720 MCBH38 BORE HEAD C3/8” SNAP-LOCK 5199 MCDH38 DROP HEAD C3/8” SNAP-LOCK 5211 MCCH38 CUTTER HEAD C3/8” SNAP-LOCK 5222 MC38M MALE COUPLING C3/8” SNAP-LOCK 5233 MC38F FEMALE COUPLING C3/8” SNAP LOCK 5244

POWER PLUS UNITSThe POWERPLUS H500 and PRO-PAK operate with any standard hand drill 3/8” or 1/2” at variable speeds up to 1300 RPM (maximum). Just chuck drill motor to the unit and operate. It is also furnished with Hand Crank for use when power is not available. It operates in traps and 40mm lines with ¼” x 25ft or 35ft cable, or, in 40mm – 63mm lines with 3/8” x 25ft or 35ft cable. Both units come complete with cable, bore head, cutter head and drop head.

Motor is not included.

The PRO-PAK Auto Feed features Squeeze Ease chucking for automatic dispensing of cable down the drain.

PRO-PAK AUTO FEED

BORE HEAD

CUTTER HEAD

DROP HEAD

DRAINCLEANING

10PLUMBOSS

AUSTRALIA

The MP1500 TOP SNAKE is for use in basin �

and sink wastes using a 1/4” bulbous head and is available in a 15’ or 25’ plasticore cable length

The MP2500 TOP SNAKE is for use in �

1 1/2”-2 1/2” lines using a 3/8” bulbous head (‘B’ series) and is available in 25’ or 35’ plasticore cable length.

Easily convert boulbous head cable to a snap lock �

connection by adding on male coupling (MC38M)

The MP1500 and MP2500 TOP SNAKES �

have the offset handle for revolving balance. The handle casting is quickly removed for inspection. Positive ‘lock on’ spring when turning handle to right, revolve handle to left to release spring.

11

DRAI

NCL

EANI

NGIM

PORT

ERS

& MA

NUFA

CTUR

ERS

OFPL

UMBI

NGEQ

UIPM

ENT

PRODUCT CODE DESCRIPTIONTOPSNAKES WITH FIXED BULBOUS HEAD

MTB1415 MP1500 TOP SNAKE B1/4” x 15’ 4179

MTB1425 MP1500 TOP SNAKE B1/4” x 25’ 4201

MTB3825 MP2500 TOP SNAKE B3/8” x 25’ 4234MTB3835 MP2500 TOP SNAKE B3/8” x 35’ 4256

CABLE REFILLS AND SPARE CUTTERSMCB1415 CABLE B1/4” x 15’ 4602 MCB1425 CABLE B1/4” x 25’ 4619 MCB3825 CABLE B3/8” x 25’ 4696 MCB3835 CABLE B3/8” x 35’ 4706MCC3825 CABLE C3/8” x 25’ 5710MCC3835 CABLE C3/8” x 35’ 5720

MBH14 BULBOUS HEAD B1/4” SCREW-ON 4807MBH38 BULBOUS HEAD B3/8” SCREW-ON 4808

MCBH38 BORE HEAD C3/8” SNAP-LOCK 5199MCDH38 DROP HEAD C3/8” SNAP-LOCK 5211MCCH38 CUTTER HEAD C3/8” SNAP-LOCK 5222MC38M MALE COUPLING C3/8” SNAP-LOCK 5233MC38F FEMALE COUPLING C3/8” SNAP-LOCK 5244

TOP SNAKE

6.3 HAND OPERATED TOP SNAKES

BORE HEAD

CUTTER HEADDROP HEAD

MC38M MALE COUPLING

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


6.4 SNAP - LOK SEWER RODS & ACCESSORIES

MSR5 Sewer Rods (1.5m X 6mm) strong but flexible�

and have Snap-Lok couplings which are designed for rugged high torque conditions.... positive connect and disconnect without keys, screws or wrenches just depress the lock button

Designed for use in sewer lines up to 8” diameter �

High quality oil tempered wire is strong �

but flexible enough for 45˚ junctions,15° bends or long sweep bends.

SEWER ROD SETS All Contain: 1 MSR2 AUGER HEAD 1 MSR4 ROOT RETRIEVER 1 MSR7 ROOT CUTTER 1 M728TH TEE HANDLE 1 MSRP4 PLUNGER 4” MSR50: 10 x MSR5 1.5m x 6mm Rods MSR75: 15 x MSR5 1.5m x 6mm RodsMSR100: 20 x MSR5 1.5m x 6mm Rods

SNAP-LOK SEWER ROD

AUGER HEAD MSR2: Auger is a tool used for some root conditions, for retrieving rags, cloths etc.

ALL PURPOSE HEAD MSR3: All Purpose Head is used as a tool for all purposes, such as retrieving rags and cloths as well as retrieving roots.

ROOT CUTTER MSR7: Root Cutter is a tool for cutting through heavy and dense root blockages. It cuts through the roots with sharp cutting edge.

SAW CUTTER MSR8: Saw Cutter is a tool similar to the MSR7 for cutting through heavy and dense root blockages, but this tool has saw tooth capabilities for the extra heavy roots.

4” PLUNGER

TEE HANDLE

DRAINCLEANING

12PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


6.4 SNAP - LOK SEWER RODS & ACCESSORIES

MSR5 Sewer Rods (1.5m X 6mm) strong but flexible�

and have Snap-Lok couplings which are designed for rugged high torque conditions.... positive connect and disconnect without keys, screws or wrenches just depress the lock button

Designed for use in sewer lines up to 8” diameter �

High quality oil tempered wire is strong �

but flexible enough for 45˚ junctions,15° bends or long sweep bends.

SEWER ROD SETS All Contain: 1 MSR2 AUGER HEAD 1 MSR4 ROOT RETRIEVER 1 MSR7 ROOT CUTTER 1 M728TH TEE HANDLE 1 MSRP4 PLUNGER 4” MSR50: 10 x MSR5 1.5m x 6mm Rods MSR75: 15 x MSR5 1.5m x 6mm RodsMSR100: 20 x MSR5 1.5m x 6mm Rods

SNAP-LOK SEWER ROD

AUGER HEAD MSR2: Auger is a tool used for some root conditions, for retrieving rags, cloths etc.

ALL PURPOSE HEAD MSR3: All Purpose Head is used as a tool for all purposes, such as retrieving rags and cloths as well as retrieving roots.

ROOT CUTTER MSR7: Root Cutter is a tool for cutting through heavy and dense root blockages. It cuts through the roots with sharp cutting edge.

SAW CUTTER MSR8: Saw Cutter is a tool similar to the MSR7 for cutting through heavy and dense root blockages, but this tool has saw tooth capabilities for the extra heavy roots.

4” PLUNGER

TEE HANDLE

DRAINCLEANING

12PLUMBOSS

AUSTRALIA

13

DRAI

NCL

EANI

NGPL

UMBO

SSSU

PPLY

PLUM

BING

,IND

USTR

IAL,

ELEC

TRIC

AL &

REF

RIGE

RATI

ONEQ

UIPM

ENT

6.4 SNAP - LOK SEWER RODS & ACCESSORIESCONT

PRODUCT CODE DESCRIPTIONMSR50 SNAP-LOK SEWER ROD SET 50’ MSR75 SNAP-LOK SEWER ROD SET 75’

MSR100 SNAP-LOK SEWER ROD SET 100’

INDIVIDUAL RODS & ACCESSORIESMSR5 SNAP-LOK SEWER ROD 5’ x 1/4” MSR1 REAMER CUTTER 8” x 1½” MSR2 AUGER HEAD 5” x 2” MSR3 ALL PURPOSE HEAD 10” x 2½” MSR4 ROOT RETRIEVER 12” x 3½” MSR7 ROOT CUTTER 3” x 3½”

MSR8 SAW CUTTER 3” x 3½”M728TH TEE HANDLE -REPAIR + DRIVEMSRP4 PLUNGER 4” (100mm)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


6.5 COIL SPRING DRAIN RODS & ACCESSORIES

PRODUCT CODE DESCRIPTIONFRH30 COIL SPRING DRAIN ROD SET 30’ FRH60 COIL SPRING DRAIN ROD SET 60’

RIAC RODS IN A COILRIAC+ DELUXE RODS IN A COIL

INDIVIDUAL RODS & ACCESSORIESFRR1 COIL SPRING DRAIN ROD 3’ x 3/4” FRH4 COIL SPRING PLUNGER 4” (100mm) FRH5 COIL SPRING PLUNGER 6” (150mm)

FRH4R PLUNGER RUBBER ONLY 4” (100mm) FRH5R PLUNGER RUBBER ONLY 6” (150mm) FRH6 COIL SPRING DOUBLE WORM SCREW

FRH7 ROD KEY

FRH8 ROD CRANK HANDLE

3’ X 3/4” Sectional Flexible Sewer Rods that join together to form a Rod Set to clear 4” to 6” sewer drains and in some instances 3” to 3 1/2” stormwater and downpipes.

COIL SPRING ROD SETS – All Contain: 1 FRH4 PLUNGER 4” 1 FRH6 DOUBLE WORM SCREW 1 FRH7 ROD KEY 1 FRH8 ROD CRANK HANDLE FRH30: 8 FRR1 RODS 3’ x 3/4”FRH60: 18 FRR1 RODS 3’ x 3/4”

RODS IN A COIL SETS:RIAC10 x FRR1 Coil Spring Drain Rod 3’ x ¾”1x RCC Cable Carrier1x FRH7 Rod Key1x MC20 3” Open Cutter1x FRH8 Rod Crank Handle1x M728M ¾” Male Coupling

RIAC+10x FRR1 Coil Spring Drain Rod 3’ x ¾”1x RCC Cable Carrier1x FRH7 Rod Key1x MC20 3” Open Cutter1x FRH8 Rod Crank Handle1x M728M ¾” Male Coupling1x MC307 Root Cutter

COIL SPRING PLUNGER

SPRING DOUBLE SCREWCOIL SPRING DRAIN ROD

ROD KEY

SPRING HANDLE

DRAINCLEANING

14

RIAC

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


6.5 COIL SPRING DRAIN RODS & ACCESSORIES

PRODUCT CODE DESCRIPTIONFRH30 COIL SPRING DRAIN ROD SET 30’ FRH60 COIL SPRING DRAIN ROD SET 60’

RIAC RODS IN A COILRIAC+ DELUXE RODS IN A COIL

INDIVIDUAL RODS & ACCESSORIESFRR1 COIL SPRING DRAIN ROD 3’ x 3/4” FRH4 COIL SPRING PLUNGER 4” (100mm) FRH5 COIL SPRING PLUNGER 6” (150mm)

FRH4R PLUNGER RUBBER ONLY 4” (100mm) FRH5R PLUNGER RUBBER ONLY 6” (150mm) FRH6 COIL SPRING DOUBLE WORM SCREW

FRH7 ROD KEY

FRH8 ROD CRANK HANDLE

3’ X 3/4” Sectional Flexible Sewer Rods that join together to form a Rod Set to clear 4” to 6” sewer drains and in some instances 3” to 3 1/2” stormwater and downpipes.

COIL SPRING ROD SETS – All Contain: 1 FRH4 PLUNGER 4” 1 FRH6 DOUBLE WORM SCREW 1 FRH7 ROD KEY 1 FRH8 ROD CRANK HANDLE FRH30: 8 FRR1 RODS 3’ x 3/4”FRH60: 18 FRR1 RODS 3’ x 3/4”

RODS IN A COIL SETS:RIAC10 x FRR1 Coil Spring Drain Rod 3’ x ¾”1x RCC Cable Carrier1x FRH7 Rod Key1x MC20 3” Open Cutter1x FRH8 Rod Crank Handle1x M728M ¾” Male Coupling

RIAC+10x FRR1 Coil Spring Drain Rod 3’ x ¾”1x RCC Cable Carrier1x FRH7 Rod Key1x MC20 3” Open Cutter1x FRH8 Rod Crank Handle1x M728M ¾” Male Coupling1x MC307 Root Cutter

COIL SPRING PLUNGER

SPRING DOUBLE SCREWCOIL SPRING DRAIN ROD

ROD KEY

SPRING HANDLE

DRAINCLEANING

14

RIAC

PLUMBOSSAUSTRALIA

15

DRAI

NCL

EANI

NGSE

RVIN

GAU

STRA

LIA’S

TRAD

ESME

NSI

NCE

1986

6.6 POLYPROPYLENE RODS & ACCESSORIES

3’ x 3/4’ sectional poly lockfast sewer rods for use in 4” & 6” sewerage drains and in some instances 3” and 3 1/2” stormwater drains and downpipes. Unique brass locking nuts ensure rods stay joined whilst working rods into drain blockages.

POLY LOCKFAST ROD SETS Both Contain: 1 x BPPL4 PLUNGER 4” 1 x BPDWS2 DOUBLE WORM SCREW 2” 1 x BPRTH ROTATING HANDLE BP30: 10 x BP343 POLY ROD 3’ X ¾” BP60: 20 x BP343 POLY ROD 3’ X ¾”

GULLY PLUNGER KITS

BGP4 Contains:2 x BP343 POLY ROD 1 x BPPL4 PLUNGER 4”

BGP6 Contains: 2 x BP343 POLY RODS 1 x BPPL6 PLUNGER 6”

POLY LOCKFAST DRAIN ROD

CLEARING WHEEL: GUIDES RODS AROUND DIFFICULT BENDS AND REMOVES MINOR BLOCKAGES BY PUSHING MATERIAL CLEAR

DOUBLE WORM SCREW: PIERCES BLOCKAGES SUCH AS PAPER OR RAGS AND THE OBSTRUCTION IS DRAWN BACK TO CLEAR THE PIPE

FLUE BRUSH

ROTATING HANDLEPLUNGER: BUILDS UP PRESSURE OF WATER WHICH FORCES OBSTRUCTION CLEAR

DROP SCRAPER: GLIDES OVER SMALL OBJECTS AND DROPS INTO VERTICAL POSITION TO ALLOW THE OFFENDING MATERIAL TO BE DRAGGED BACK TOWARDS THE OPERATOR

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


6.6 POLYPROPYLENE RODS & ACCESSORIESCONT

6.7 STEELFLEX RODS & ACCESSORIES

PRODUCT CODE DESCRIPTIONBP30 POLY LOCKFAST DRAIN ROD SET 30’ BP60 POLY LOCKFAST DRAIN ROD SET 60’

BGP4 GULLY PLUNGER KIT 4” (100mm) BGP6 GULLY PLUNGER KIT 6” (150mm)

INDIVIDUAL RODS & ACCESSORIESBP343 POLY LOCKFAST DRAIN ROD 3’ x 3/4” BPRTH POLY LOCKFAST ROTATING HANDLEBPPL4 POLY LOCKFAST PLUNGER 4” (100mm) BPPL6 POLY LOCKFAST PLUNGER 6” (150mm)

BPPL4RO PLUNGER RUBBER ONLY 4” (100mm)BPPL6RO PLUNGER RUBBER ONLY 6” (150mm) BPDWS2 POLY LOCKFAST DOUBLE WORM SCREW 2”

BPDWS3 POLY DOUBLE WORM SCREW 3” (4” Pipe) BPDWS4 POLY DOUBLE WORM SCREW 4” (6” Pipe)

BPDS POLY LOCKFAST DROP SCRAPER BPCW POLY LOCKFAST CLEARING WHEEL

BPFL4M POLY LOCKFAST FLUE BRUSH 45 METAL/C.

STEELFLEXROTATING HANDLE

STEELFLEX SPEAR HEAD

STEELFLEX DRAIN ROD

STEELFLEX SINGLE WORM SCREW

STEELFLEXLOCKING SPANNER

CROWN ROOT CUTTER

STEELFLEX ROD GRIPPER

STEELFLEX DOUBLE WORM SCREW

DRAINCLEANING

16PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


6.6 POLYPROPYLENE RODS & ACCESSORIESCONT

6.7 STEELFLEX RODS & ACCESSORIES

PRODUCT CODE DESCRIPTIONBP30 POLY LOCKFAST DRAIN ROD SET 30’ BP60 POLY LOCKFAST DRAIN ROD SET 60’

BGP4 GULLY PLUNGER KIT 4” (100mm) BGP6 GULLY PLUNGER KIT 6” (150mm)

INDIVIDUAL RODS & ACCESSORIESBP343 POLY LOCKFAST DRAIN ROD 3’ x 3/4” BPRTH POLY LOCKFAST ROTATING HANDLEBPPL4 POLY LOCKFAST PLUNGER 4” (100mm) BPPL6 POLY LOCKFAST PLUNGER 6” (150mm)

BPPL4RO PLUNGER RUBBER ONLY 4” (100mm)BPPL6RO PLUNGER RUBBER ONLY 6” (150mm) BPDWS2 POLY LOCKFAST DOUBLE WORM SCREW 2”

BPDWS3 POLY DOUBLE WORM SCREW 3” (4” Pipe) BPDWS4 POLY DOUBLE WORM SCREW 4” (6” Pipe)

BPDS POLY LOCKFAST DROP SCRAPER BPCW POLY LOCKFAST CLEARING WHEEL

BPFL4M POLY LOCKFAST FLUE BRUSH 45 METAL/C.

STEELFLEXROTATING HANDLE

STEELFLEX SPEAR HEAD

STEELFLEX DRAIN ROD

STEELFLEX SINGLE WORM SCREW

STEELFLEXLOCKING SPANNER

CROWN ROOT CUTTER

STEELFLEX ROD GRIPPER

STEELFLEX DOUBLE WORM SCREW

DRAINCLEANING

16PLUMBOSS

AUSTRALIA

17

DRAI

NCL

EANI

NGPL

UMBO

SS -

AUST

RALI

A’SOW

NPL

UMBI

NGTO

OLSP

ECIA

LIST

S

6.7 STEELFLEX RODS & ACCESSORIESCONT

PRODUCT CODE DESCRIPTIONSFS50 STEELFLEX DRAIN ROD SET 50’ (15m) SFS100 STEELFLEX DRAIN ROD SET 100’ (30m)

SFSHR50 ROD SET WITH HAND RATCHET 50’ SFSHR100 ROD SET WITH HAND RATCHET 100’

RODS AND ACCESSORIESSF3000 STEELFLEX DRAIN ROD 1m x 8mm SF3001 STEELFLEX DRAIN ROD 1.5m x 8mm SF3010 STEELFLEX ROTATING HANDLE SF3012 STEELFLEX ROD GRIPPER SF3013 STEELFLEX LOCKING SPANNER SF3014 STEELFLEX TOMMY BAR

SF3048 HAND RATCHET WITH FOOT STIRRUP SF3018 STEELFLEX DOUBLE WORM SCREW 2” SF3123 DOUBLE WORM SCREW 3” (for 4” PIPE) SF3019 DOUBLE WORM SCREW 4” (for 6” PIPE) SF3020 DOUBLE WORM SCREW 6” (for 9” PIPE) SF3035 STEELFLEX PLUNGER 4” (100mm)

This range of rods and tools is manufactured from heat-treated steel. Used for heavy duty sewer cleaning applications. It can also be used with motorised tools.

STEEL FLEX ROD SETSContains:1 SF3018 DOUBLE WORM SCREW 2”1 SF3123 DOUBLE WORM SCREW 3”1 SF3035 PLUNGER 4”1 SF3036 PLUNGER 6”1 SF3028 SPEAR HEAD 1 SF3013 LOCKING SPANNER1 SF3010 ROTATING HANDLESFS50: 10 x SF3001 ROD 1.5m SFS100: 20 x SF3001 ROD 1.5m

ROD SET WITH HAND RATCHET Contains:1 SF3018 DOUBLE WORM1 SF3123 DOUBLE WORM1 SF3035 PLUNGER 4”1 SF3036 PLUNGER 6”1 SF3028 SPEAR HEAD1 SF3013 LOCKING SPANNER 1 SF3010 ROTATING HANDLE 1 SF3048 HAND RATCHETSFSHR50:10 x SF3001 ROD 1.5mSFSHR100:20 x SF3001 ROD 1.5m

CONNECTING STEELFLEX RODS

HAND RATCHET WITH FOOT STIRRUP. PLACE ROD IN END AND ROTATE RATCHET

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



PRODUCT CODE DESCRIPTIONRODS AND ACCESSORIES

SF3036 STEELFLEX PLUNGER 6” (150mm)SF3037 STEELFLEX PLUNGER 9” (225mm)SF3015 STEELFLEX SINGLE WORM SCREW 2”SF3041 STEELFLEX CROWN ROOT CUTTER 4”SF3042 STEELFLEX CROWN ROOT CUTTER 6”SF3028 STEELFLEX SPEAR HEADSF3033 STEELFLEX RETRIEVING TOOL

PRODUCT CODE DESCRIPTIONPP4S POWA PLUNGA 1200mm x 4”PP6S POWA PLUNGA 1200mm x 4” & 6”PP6L POWA PLUNGA 1900mm x 4” & 6”

6.8 POWA PLUNGA

Designed for heavy duty 4” and 6” plunging, these units utilise a solid galvanised bar and heavy duty rubber for the more serious plunging needs.

DRAINCLEANING

18PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



PRODUCT CODE DESCRIPTIONRODS AND ACCESSORIES

SF3036 STEELFLEX PLUNGER 6” (150mm)SF3037 STEELFLEX PLUNGER 9” (225mm)SF3015 STEELFLEX SINGLE WORM SCREW 2”SF3041 STEELFLEX CROWN ROOT CUTTER 4”SF3042 STEELFLEX CROWN ROOT CUTTER 6”SF3028 STEELFLEX SPEAR HEADSF3033 STEELFLEX RETRIEVING TOOL

PRODUCT CODE DESCRIPTIONPP4S POWA PLUNGA 1200mm x 4”PP6S POWA PLUNGA 1200mm x 4” & 6”PP6L POWA PLUNGA 1900mm x 4” & 6”

6.8 POWA PLUNGA

Designed for heavy duty 4” and 6” plunging, these units utilise a solid galvanised bar and heavy duty rubber for the more serious plunging needs.

DRAINCLEANING

18PLUMBOSS

AUSTRALIA

19

DRAI

NCL

EANI

NGAU

STRA

LIA’S

TRUS

TED

PLUM

BING

TOOL

BRAN

D

PRODUCT CODE DESCRIPTION DISCOUNT QTY.GS303 GULLY SCOOP 3’ x 3” PlumBOSS 5GS304 GULLY SCOOP 3’ x 4” PlumBOSS 5GS503 GULLY SCOOP 5’ x 3” PlumBOSS 5GS504 GULLY SCOOP 5’ x 4” PlumBOSS 5GS506 GULLY SCOOP 5’ x 6” PlumBOSS 5GS704 GULLY SCOOP 7’ x 4” PlumBOSS 5GS706 GULLY SCOOP 7’ x 6” PlumBOSS 5

6.9 GULLY SCOOPS

WHAT IS A PLUMBER’S HEALTH WORTH?

The plumBOSS Gully Scoop is made of zinc-plated steel. It is immune to Aids, Hepatitis B, Blood Poisoning and works better than any other hook or hooker. The Gully Scoop will grab with positive grip, toys, rocks, gravel, loosened cement slurry, syringes and balls. Use in DTs, stormwater gullies, boundary traps, pits and even post holes where the post hole shovel requires an oblique angle to clean out. With jaws closed, the scoop can be used like a plunger in reverse to draw material from further around the trap.

Available in 3 different lengths and 3 different scoop sizes: 3” Scoop fits in 3” pipes and larger and palazzi traps 4” Scoop fits in 4” pipes and larger 6” Scoop fits in 6” pipes and larger

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


6.10 EXTENDASCOPE® CLOSET AUGER

Designed for use in clearing toilet pan �

blockages but can also be used in urinal blockages and in some instances shower risers.

Cable on the Closet Auger extends from 3’ to 6’ �

when depressing male coupling button on handle.

Extra cable can be added on end of Closet �

Auger cable to clear that length of drain.

The 4’ extensions are economical, easily �

stored and transported and are quickly assembled with Snap-Lok fittings.

DROP HEADCLOSET AUGER

CRAWL HEAD

PRODUCT CODE DESCRIPTIONMWHE3-6 CLOSET AUGER EXTENDASCOPE® 1117 MCLEXT EXTENSION REFILL CABLE 1123 MCL24 OPEN HEAD C3/8” SNAP LOK 1233MCL25 CRAWL HEAD C3/8” SNAP-LOK 1244MCL26 DROP HEAD C3/8” SNAP-LOK 1255

MCL28M MALE COUPLING SNAP-LOK 1277MCL28F FEMALE COUPLING SNAP-LOK 1280

DRAINCLEANING

20PLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


6.10 EXTENDASCOPE® CLOSET AUGER

Designed for use in clearing toilet pan �

blockages but can also be used in urinal blockages and in some instances shower risers.

Cable on the Closet Auger extends from 3’ to 6’ �

when depressing male coupling button on handle.

Extra cable can be added on end of Closet �

Auger cable to clear that length of drain.

The 4’ extensions are economical, easily �

stored and transported and are quickly assembled with Snap-Lok fittings.

DROP HEADCLOSET AUGER

CRAWL HEAD

PRODUCT CODE DESCRIPTIONMWHE3-6 CLOSET AUGER EXTENDASCOPE® 1117 MCLEXT EXTENSION REFILL CABLE 1123 MCL24 OPEN HEAD C3/8” SNAP LOK 1233MCL25 CRAWL HEAD C3/8” SNAP-LOK 1244MCL26 DROP HEAD C3/8” SNAP-LOK 1255

MCL28M MALE COUPLING SNAP-LOK 1277MCL28F FEMALE COUPLING SNAP-LOK 1280

DRAINCLEANING

20PLUMBOSS

AUSTRALIA

21

DRAI

NCL

EANI

NGTH

ETU

BE &

PIP

ETO

OLSP

ECIA

LIST

S

6.11 KINO10 KINETIC WATER RAM

6.12 KYCO20 KYNA-COLT BLOCKAGE GUN

FOR 1 1/4” - 4” LINES

The Kinetic Water Ram uses a burst of compressed air that drives a shock wave through water to break up a stoppage. This force is called kinetic energy. The Ram is particularly useful when a stoppage is on the far side of a drum trap or a series of tight bends, since the shock wave can travel around bends and past stacks without losing its force.

A gauge indicates when the tool has been pumped up to desired pressure. 98% of the Ram’s kinetic force hits the stoppage, while only 2% is spent against the walls of the pipe. The instant impact protects pipes and joints because there’s no build up of pressure in the plumbing system.

KYNA COLT clears blockages by a shock wave �

through the waste water. The shock is released when a charged cartridge is pierced as the trigger is activated.

Guaranteed to clear 95% of all blockages in �

domestic waste pipes in less than 30 seconds.

Used for sinks, urinals, toilet bowls, showers, �

heating systems, fuel pipes, cooling systems etc.

Power supplied by a standard �

inexpensive 9gm CO2 bulb

No mess - no fuss �

No dangerous chemicals �

No damage to pipes�

PRODUCT CODE DESCRIPTIONKINO10 KINETIC WATER RAM

PRODUCT CODE DESCRIPTIONKYCO20 KYNA-COLT BLOCKAGE GUN (RUBBER CONES SOLD SEPERATELY) KYCOGB GAS BULBS FOR KYNA-COLT (PACKET OF 10)

KCBS SET OF 5 RUBBER CONES

RUBBER CONES SOLD SEPERATELY

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


DRAINCLEANING

22

6.13 CLOG BUSTER

6.14 DRAIN RAT

Unclog drain pipes fast with Cherne’s Clog Buster Drain Flusher. The Clog Buster is made of 100% natural rubber, ruggedly designed for use after use. The connection is a standard 3/4” female garden hose thread.

Cleans blocked drains easily and efficiently �

Simply attach to garden hose �

Ideal for stormwater and agricultural drains �

PRODUCT CODE DESCRIPTION303-127 CLOG BUSTER DRAIN FLUSHER 1”-2” CHERNE 303-135 CLOG BUSTER DRAIN FLUSHER 1½” - 3” CHERNE303-143 CLOG BUSTER DRAIN FLUSHER 4” - 6” CHERNE

PRODUCT CODE DESCRIPTIONDR01 PLUMBOSS DRAIN RAT

DR01BHC DRAIN RAT W/ BARB AND HOSE CLAMP FOR ½” HOSE

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


DRAINCLEANING

22

6.13 CLOG BUSTER

6.14 DRAIN RAT

Unclog drain pipes fast with Cherne’s Clog Buster Drain Flusher. The Clog Buster is made of 100% natural rubber, ruggedly designed for use after use. The connection is a standard 3/4” female garden hose thread.

Cleans blocked drains easily and efficiently �

Simply attach to garden hose �

Ideal for stormwater and agricultural drains �

PRODUCT CODE DESCRIPTION303-127 CLOG BUSTER DRAIN FLUSHER 1”-2” CHERNE 303-135 CLOG BUSTER DRAIN FLUSHER 1½” - 3” CHERNE303-143 CLOG BUSTER DRAIN FLUSHER 4” - 6” CHERNE

PRODUCT CODE DESCRIPTIONDR01 PLUMBOSS DRAIN RAT

DR01BHC DRAIN RAT W/ BARB AND HOSE CLAMP FOR ½” HOSE

PLUMBOSSAUSTRALIA

23

DRAI

NCL

EANI

NGIM

PORT

ERS

& MA

NUFA

CTUR

ERS

OFPL

UMBI

NGEQ

UIPM

ENT

6.15 SINK PLUNGERS

6.16 DRAIN TRACING DYE

DUAL ACTION FORCE PUMP

All plastic force pump with two interchangeable cups, one for clearing blocked sinks, wash basins, showers, baths and urinals, the other, WC’s.

PLUNGERS

Popular tools for clearing basins, kitchen sinks, laundry troughs, baths and showers.

Powder dyes for tracing the direction of flow or where a drain pipe runs to. Non Toxic!

PRODUCT CODE DESCRIPTIONBDA4 DUAL ACTION FORCE PUMP

PRODUCT CODE DESCRIPTIONHSP4 HANDYMAN SINK PLUNGER 4” HSP6 HANDYMAN SINK PLUNGER 6”

PRODUCT CODE DESCRIPTION1260S FLUORESCEIN DRAIN DYE 4oz (113g)126IV RED DRAIN DYE 4oz (113g)

FD1000 FLOURESCEIN DYE (1kg)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


7holesaws

7.1 BI-METAL HOLE SAWS - MORSE 2

7.2 TUNGSTEN CARBIDE TIPPED HOLE SAWS - MORSE 8

7.3 HOLE SAW LUBRICANT 12

7.4 HOLE SAW TOOL BOX 12

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


7.1 BI-METAL HOLE SAWS-MORSE

TA10 5/8”TA11 11/16”TA12 3/4”TA14 7/8”TA15 15/16”

TA16 1”

TA17 1 1/16”

TA18 1 1/8”

TA19 1 3/16”

TA20 1 1/4”

TA21 1 5/16”

TA22 1 3/8”

TA24 1 1/2”

TA26 1 5/8”

TA28 1 3/4”

TA30 1 7/8”

TA32 2”

TA33 2 1/16”

TA34 2 1/8”

TA36 2 1/4”

TA38 2 3/8”

TA40 2 1/2”

TA42 2 5/8”

TA44 2 3/4”

TA46 2 7/8”

TA48 3”

TA50 3 1/8”

TA52 3 1/4”

TA56 3 1/2”

TA64 4”

ME12 Extension Arbor

10 Carded Pilot Drills

TAF06 contains as above plus:

TA66 4 1/8”

TA76 4 3/4”

TA72 4 1/2”

TA80 5”

TA88 5 1/2”

TA96 6”

‘TA’ SERIESThe Real McCoy Variable Pitch Bi-Metal Hole Saw, deep-cutting with Built-In Arbor.

The Real McCoy Hole Saws cut wood, plastic, or any machineable metal including cast iron and stainless steel. More importantly, they’ll cut your operating costs!

Labour and Tool Cost Savings From:

Faster Cutting - Cuts faster than 6 �

pitch saws in most applications Longer Life - Outlasts 6 pitch hole �

saws in most applications Built in Arbor - Elimination of separate arbors can cut �

up to 40% off your total hole sawing costs. Check your own ratio of arbor versus hole saw purchases. No more wasted time searching for arbors, changing arbors, or waiting for arbors. Hole Saws available up to 6” (150mm) �

40mm cutting depth cuts through 2” X 4” joists �

High Wear Resistance �

Reduces Vibration �

Teeth are shock resistant and are longer �

lasting due to the M3 cutting edge

‘TA’ SERIES DISPLAY BOARDSAvailable up to 4” or 6”

TAF04 CONTAINS:

HOLESAW

S 2

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


7.1 BI-METAL HOLE SAWS-MORSE

TA10 5/8”TA11 11/16”TA12 3/4”TA14 7/8”TA15 15/16”

TA16 1”

TA17 1 1/16”

TA18 1 1/8”

TA19 1 3/16”

TA20 1 1/4”

TA21 1 5/16”

TA22 1 3/8”

TA24 1 1/2”

TA26 1 5/8”

TA28 1 3/4”

TA30 1 7/8”

TA32 2”

TA33 2 1/16”

TA34 2 1/8”

TA36 2 1/4”

TA38 2 3/8”

TA40 2 1/2”

TA42 2 5/8”

TA44 2 3/4”

TA46 2 7/8”

TA48 3”

TA50 3 1/8”

TA52 3 1/4”

TA56 3 1/2”

TA64 4”


10 Carded Pilot Drills

TAF06 contains as above plus:

TA66 4 1/8”

TA76 4 3/4”

TA72 4 1/2”

TA80 5”

TA88 5 1/2”

TA96 6”

‘TA’ SERIESThe Real McCoy Variable Pitch Bi-Metal Hole Saw, deep-cutting with Built-In Arbor.

The Real McCoy Hole Saws cut wood, plastic, or any machineable metal including cast iron and stainless steel. More importantly, they’ll cut your operating costs!

Labour and Tool Cost Savings From:

Faster Cutting - Cuts faster than 6 �

pitch saws in most applications Longer Life - Outlasts 6 pitch hole �

saws in most applications Built in Arbor - Elimination of separate arbors can cut �

up to 40% off your total hole sawing costs. Check your own ratio of arbor versus hole saw purchases. No more wasted time searching for arbors, changing arbors, or waiting for arbors. Hole Saws available up to 6” (150mm) �

40mm cutting depth cuts through 2” X 4” joists �

High Wear Resistance �

Reduces Vibration �

Teeth are shock resistant and are longer �

lasting due to the M3 cutting edge

‘TA’ SERIES DISPLAY BOARDSAvailable up to 4” or 6”

TAF04 CONTAINS:

HOLESAW

S 2

PLUMBOSSAUSTRALIA

7.1 BI-METAL HOLE SAWS-MORSECONT

‘TA’ series Hole Saw Kits

TA9 KIT Hole Saw Kit Contains:

TA12, 19mm TA24, 38mm TA36, 57mmTA16, 25mm TA28, 44mm TA58, 92mmTA18, 29mm TA30, 48mm TA72, 114mm3 Pilot Drills Metal box with foam insert

TA4 KIT Hole Saw Kit Contains:

TA30, 48mm TA58, 92mm TA36, 57mm TA72, 114mm 3 Pilot Drills Metal box with foam insert

TA01 MAINTENANCE Hole Saw Kit Contains:

TA12, 19mm TA22, 35mm TA32, 51mmTA14, 22mm TA24, 38mm TA36, 57mmTA18, 29mm TA28, 44mm TA40, 64mm4 Pilot Drills ME12 Extension Screwdriver

TA04P PLUMBERS Hole Saw Kit Contains:

TA12, 19mm TA18, 29mm TA28, 44mmTA14, 22mm TA24, 38mm TA36, 57mm3 Pilot Drills

TA05M MECHANICS Hole Saw Kit Contains:

TA14, 22mm TA18, 29mmTA16, 25mm TA20, 32mmTA24, 38mm1 Pilot Drill

3 HO

LESA

WS

SERV

ING

AUST

RALI

A’STR

ADES

MEN

SINC

E 19

86

TA01 DESIGNED FOR PLUMBERS, ELECTRICIANS, INDUSTRIAL AND GENERAL PURPOSE MAINTENANCE

TA9KIT TA4KIT

TA04P DESIGNED FOR PLUMBERS

TA05M DESIGNED FOR APPLICATIONS IN CONSTRUCTION INDUSTRY AND AUTOMOTIVE MARKETS

DESIGNED FOR AUSTRALIANPLUMBERS BASED ON DWVPIPE SIZES

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


PRODUCT CODE DESCRIPTION DISCOUNT QTY.DISPLAY BOARDS

TAF04 HOLE SAW DISPLAY BOARD WITH STOCK-4” MORSE TAF06 HOLE SAW DISPLAY BOARD WITH STOCK-6” MORSE

HOLE SAW KITSTA9KIT DWV PLUMBERS HOLE SAW KIT 9 PCE N/ATA4KIT DWV PLUMBERS HOLE SAW KIT 4 PCE N/ATA01 MAINTENANCE HOLE SAW KIT MORSE N/A

TA04P PLUMBERS HOLE SAW KIT MORSE N/ATA05M MECHANICS HOLE SAW KIT MORSE N/A

INDIVIDUAL HOLE SAWSTA09 HOLE SAW 9/16” (14mm) MORSE 20 ASSORTED

TA10 HOLE SAW 5/8” (16mm) MORSE 20 ASSORTEDTA11 HOLE SAW 11/16” (17mm) MORSE 20 ASSORTEDTA12 HOLE SAW 3/4” (19mm) MORSE 20 ASSORTEDTA13 HOLE SAW 13/16” (21mm) MORSE 20 ASSORTEDTA14 HOLE SAW 7/8” (22mm) MORSE 20 ASSORTEDTA15 HOLE SAW 15/16” (24mm) MORSE 20 ASSORTEDTA16 HOLE SAW 1” (25mm) MORSE 20 ASSORTEDTA17 HOLE SAW 1 1/16” (27mm) MORSE 20 ASSORTEDTA18 HOLE SAW 1 1/8” (29mm) MORSE 20 ASSORTEDTA19 HOLE SAW 1 3/16” (30mm) MORSE 20 ASSORTEDTA20 HOLE SAW 1 1/4” (32mm) MORSE 20 ASSORTEDTA21 HOLE SAW 1 5/16” (33mm) MORSE 20 ASSORTEDTA22 HOLE SAW 1 3/8” (35mm) MORSE 20 ASSORTEDTA24 HOLE SAW 1 1/2” (38mm) MORSE 20 ASSORTEDTA26 HOLE SAW 1 5/8” (41mm) MORSE 20 ASSORTEDTA28 HOLE SAW 1 3/4” (44mm) MORSE 20 ASSORTEDTA30 HOLE SAW 1 7/8” (48mm) MORSE 20 ASSORTEDTA32 HOLE SAW 2” (51mm) MORSE 20 ASSORTEDTA33 HOLE SAW 2 1/16” (52mm) MORSE 20 ASSORTEDTA34 HOLE SAW 2 1/8” (54mm) MORSE 20 ASSORTED

TA36 HOLE SAW 2 1/4” (57mm) MORSE 20 ASSORTED

TA37 HOLE SAW 2 5/16” (59mm) MORSE 20 ASSORTEDTA38 HOLE SAW 2 3/8” (60mm) MORSE 20 ASSORTEDTA40 HOLE SAW 2 1/2” (64mm) MORSE 20 ASSORTEDTA41 HOLE SAW 2 9/16” (65mm) MORSE 20 ASSORTEDTA42 HOLE SAW 2 5/8” (67mm) MORSE 20 ASSORTEDTA44 HOLE SAW 2 3/4” (70mm) MORSE 20 ASSORTEDTA46 HOLE SAW 2 7/8” (73mm) MORSE 20 ASSORTEDTA48 HOLE SAW 3” (76mm) MORSE 20 ASSORTEDTA50 HOLE SAW 3 1/8” (79mm) MORSE 20 ASSORTEDTA52 HOLE SAW 3 1/4” (83mm) MORSE 20 ASSORTED


HOLESAW

S 4

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


PRODUCT CODE DESCRIPTION DISCOUNT QTY.DISPLAY BOARDS

TAF04 HOLE SAW DISPLAY BOARD WITH STOCK-4” MORSE TAF06 HOLE SAW DISPLAY BOARD WITH STOCK-6” MORSE

HOLE SAW KITSTA9KIT DWV PLUMBERS HOLE SAW KIT 9 PCE N/ATA4KIT DWV PLUMBERS HOLE SAW KIT 4 PCE N/ATA01 MAINTENANCE HOLE SAW KIT MORSE N/A

TA04P PLUMBERS HOLE SAW KIT MORSE N/ATA05M MECHANICS HOLE SAW KIT MORSE N/A

INDIVIDUAL HOLE SAWSTA09 HOLE SAW 9/16” (14mm) MORSE 20 ASSORTED

TA10 HOLE SAW 5/8” (16mm) MORSE 20 ASSORTEDTA11 HOLE SAW 11/16” (17mm) MORSE 20 ASSORTEDTA12 HOLE SAW 3/4” (19mm) MORSE 20 ASSORTEDTA13 HOLE SAW 13/16” (21mm) MORSE 20 ASSORTEDTA14 HOLE SAW 7/8” (22mm) MORSE 20 ASSORTEDTA15 HOLE SAW 15/16” (24mm) MORSE 20 ASSORTEDTA16 HOLE SAW 1” (25mm) MORSE 20 ASSORTEDTA17 HOLE SAW 1 1/16” (27mm) MORSE 20 ASSORTEDTA18 HOLE SAW 1 1/8” (29mm) MORSE 20 ASSORTEDTA19 HOLE SAW 1 3/16” (30mm) MORSE 20 ASSORTEDTA20 HOLE SAW 1 1/4” (32mm) MORSE 20 ASSORTEDTA21 HOLE SAW 1 5/16” (33mm) MORSE 20 ASSORTEDTA22 HOLE SAW 1 3/8” (35mm) MORSE 20 ASSORTEDTA24 HOLE SAW 1 1/2” (38mm) MORSE 20 ASSORTEDTA26 HOLE SAW 1 5/8” (41mm) MORSE 20 ASSORTEDTA28 HOLE SAW 1 3/4” (44mm) MORSE 20 ASSORTEDTA30 HOLE SAW 1 7/8” (48mm) MORSE 20 ASSORTEDTA32 HOLE SAW 2” (51mm) MORSE 20 ASSORTEDTA33 HOLE SAW 2 1/16” (52mm) MORSE 20 ASSORTEDTA34 HOLE SAW 2 1/8” (54mm) MORSE 20 ASSORTED


TA37 HOLE SAW 2 5/16” (59mm) MORSE 20 ASSORTEDTA38 HOLE SAW 2 3/8” (60mm) MORSE 20 ASSORTEDTA40 HOLE SAW 2 1/2” (64mm) MORSE 20 ASSORTEDTA41 HOLE SAW 2 9/16” (65mm) MORSE 20 ASSORTEDTA42 HOLE SAW 2 5/8” (67mm) MORSE 20 ASSORTEDTA44 HOLE SAW 2 3/4” (70mm) MORSE 20 ASSORTEDTA46 HOLE SAW 2 7/8” (73mm) MORSE 20 ASSORTEDTA48 HOLE SAW 3” (76mm) MORSE 20 ASSORTEDTA50 HOLE SAW 3 1/8” (79mm) MORSE 20 ASSORTEDTA52 HOLE SAW 3 1/4” (83mm) MORSE 20 ASSORTED


HOLESAW

S 4

PLUMBOSSAUSTRALIA

5 HO

LESA

WS

PLUM

BOSS

- AU

STRA

LIA’S

OWN

PLUM

BING

TOOL

SPEC

IALI

STS

PRODUCT CODE DESCRIPTION DISCOUNT QTY.INDIVIDUAL HOLE SAWS


TA56 HOLE SAW 3 1/2” (89mm) MORSE 20 ASSORTEDTA58 HOLE SAW 3 5/8” (92mm) MORSE 20 ASSORTEDTA60 HOLE SAW 3 3/4” (95mm) MORSE 20 ASSORTEDTA62 HOLE SAW 3 7/8” (98mm) MORSE 20 ASSORTEDTA64 HOLE SAW 4” (102mm) MORSE 20 ASSORTEDTA66 HOLE SAW 4 1/8” (105mm) MORSE 20 ASSORTEDTA68 HOLE SAW 4 1/4” (108mm) MORSE 20 ASSORTEDTA70 HOLE SAW 4 3/8” (111mm) MORSE 20 ASSORTED TA72 HOLE SAW 4 1/2” (114mm) MORSE 20 ASSORTEDTA76 HOLE SAW 4 3/4” (121mm) MORSE 20 ASSORTEDTA80 HOLE SAW 5” (127mm) MORSE 20 ASSORTEDTA88 HOLE SAW 5 1/2” (140mm) MORSE 20 ASSORTEDTA92 HOLE SAW 5 3/4” (146mm) MORSE 20 ASSORTEDTA96 HOLE SAW 6” (152mm) MORSE 20 ASSORTED

ACCESSORIES FOR ‘TA’ SERIESME12 EXTENSION ARBOR 12” (300mm) MORSE

MPD410 PILOT DRILL 1/4” MORSE MIN BUY 10


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


PRODUCT CODE DESCRIPTION DISCOUNT QTY.AV09 HOLE SAW 9/16” (14mm) MORSE 20 ASSORTEDAV10 HOLE SAW 5/8” (16mm) MORSE 20 ASSORTEDAV11 HOLE SAW 11/16” (17mm) MORSE 20 ASSORTEDAV12 HOLE SAW 3/4” (19mm) MORSE 20 ASSORTEDAV13 HOLE SAW 13/16” (21mm) MORSE 20 ASSORTEDAV14 HOLE SAW 7/8” (22mm) MORSE 20 ASSORTEDAV15 HOLE SAW 15/16” (24mm) MORSE 20 ASSORTEDAV16 HOLE SAW 1” (25mm) MORSE 20 ASSORTEDAV17 HOLE SAW 1 1/16” (27mm) MORSE 20 ASSORTEDAV18 HOLE SAW 1 1/8” (29mm) MORSE 20 ASSORTEDAV19 HOLE SAW 1 3/16” (30mm) MORSE 20 ASSORTEDAV20 HOLE SAW 1 1/4” (32mm) MORSE 20 ASSORTEDAV21 HOLE SAW 1 5/16” (33mm) MORSE 20 ASSORTEDAV22 HOLE SAW 1 3/8” (35mm) MORSE 20 ASSORTEDAV24 HOLE SAW 1 1/2” (38mm) MORSE 20 ASSORTEDAV26 HOLE SAW 1 5/8” (41mm) MORSE 20 ASSORTEDAV28 HOLE SAW 1 3/4” (44mm) MORSE 20 ASSORTEDAV30 HOLE SAW 1 7/8” (48mm) MORSE 20 ASSORTEDAV32 HOLE SAW 2” (51mm) MORSE 20 ASSORTEDAV33 HOLE SAW 2 1/16” (52mm) MORSE 20 ASSORTEDAV34 HOLE SAW 2 1/8” (54mm) MORSE 20 ASSORTEDAV36 HOLE SAW 2 1/4” (57mm) MORSE 20 ASSORTEDAV37 HOLE SAW 2 5/16” (59mm) MORSE 20 ASSORTEDAV38 HOLE SAW 2 3/8” (60mm) MORSE 20 ASSORTEDAV40 HOLE SAW 2 1/2” (64mm) MORSE 20 ASSORTEDAV41 HOLE SAW 2 9/16” (65mm) MORSE 20 ASSORTEDAV42 HOLE SAW 2 5/8” (67mm) MORSE 20 ASSORTEDAV44 HOLE SAW 2 3/4” (70mm) MORSE 20 ASSORTEDAV46 HOLE SAW 2 7/8” (73mm) MORSE 20 ASSORTEDAV48 HOLE SAW 3” (76mm) MORSE 20 ASSORTEDAV50 HOLE SAW 3 1/8” (79mm) MORSE 20 ASSORTEDAV52 HOLE SAW 3 1/4” (83mm) MORSE 20 ASSORTEDAV54 HOLE SAW 3 3/8” (86mm) MORSE 20 ASSORTEDAV56 HOLE SAW 3 1/2” (89mm) MORSE 20 ASSORTED


‘AV’ SERIESThis premium line of professional quality Hole Saws feature an M3 high-speed cutting edge, electron beam welded to a tough steel backer. Caps stand up to abuse and punishment, yet are lighter and easier to use than those of competitors. The positive rake tooth design provides better chip clearance as teeth cut into wood, plastic or any machinable metal. The 40mm cutting depth makes cutting through 2x4’s easy. A separate arbor is required.

HOLESAW

S 6

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


PRODUCT CODE DESCRIPTION DISCOUNT QTY.AV09 HOLE SAW 9/16” (14mm) MORSE 20 ASSORTEDAV10 HOLE SAW 5/8” (16mm) MORSE 20 ASSORTEDAV11 HOLE SAW 11/16” (17mm) MORSE 20 ASSORTEDAV12 HOLE SAW 3/4” (19mm) MORSE 20 ASSORTEDAV13 HOLE SAW 13/16” (21mm) MORSE 20 ASSORTEDAV14 HOLE SAW 7/8” (22mm) MORSE 20 ASSORTEDAV15 HOLE SAW 15/16” (24mm) MORSE 20 ASSORTEDAV16 HOLE SAW 1” (25mm) MORSE 20 ASSORTEDAV17 HOLE SAW 1 1/16” (27mm) MORSE 20 ASSORTEDAV18 HOLE SAW 1 1/8” (29mm) MORSE 20 ASSORTEDAV19 HOLE SAW 1 3/16” (30mm) MORSE 20 ASSORTEDAV20 HOLE SAW 1 1/4” (32mm) MORSE 20 ASSORTEDAV21 HOLE SAW 1 5/16” (33mm) MORSE 20 ASSORTEDAV22 HOLE SAW 1 3/8” (35mm) MORSE 20 ASSORTEDAV24 HOLE SAW 1 1/2” (38mm) MORSE 20 ASSORTEDAV26 HOLE SAW 1 5/8” (41mm) MORSE 20 ASSORTEDAV28 HOLE SAW 1 3/4” (44mm) MORSE 20 ASSORTEDAV30 HOLE SAW 1 7/8” (48mm) MORSE 20 ASSORTEDAV32 HOLE SAW 2” (51mm) MORSE 20 ASSORTEDAV33 HOLE SAW 2 1/16” (52mm) MORSE 20 ASSORTEDAV34 HOLE SAW 2 1/8” (54mm) MORSE 20 ASSORTEDAV36 HOLE SAW 2 1/4” (57mm) MORSE 20 ASSORTEDAV37 HOLE SAW 2 5/16” (59mm) MORSE 20 ASSORTEDAV38 HOLE SAW 2 3/8” (60mm) MORSE 20 ASSORTEDAV40 HOLE SAW 2 1/2” (64mm) MORSE 20 ASSORTEDAV41 HOLE SAW 2 9/16” (65mm) MORSE 20 ASSORTEDAV42 HOLE SAW 2 5/8” (67mm) MORSE 20 ASSORTEDAV44 HOLE SAW 2 3/4” (70mm) MORSE 20 ASSORTEDAV46 HOLE SAW 2 7/8” (73mm) MORSE 20 ASSORTEDAV48 HOLE SAW 3” (76mm) MORSE 20 ASSORTEDAV50 HOLE SAW 3 1/8” (79mm) MORSE 20 ASSORTEDAV52 HOLE SAW 3 1/4” (83mm) MORSE 20 ASSORTEDAV54 HOLE SAW 3 3/8” (86mm) MORSE 20 ASSORTEDAV56 HOLE SAW 3 1/2” (89mm) MORSE 20 ASSORTED


‘AV’ SERIESThis premium line of professional quality Hole Saws feature an M3 high-speed cutting edge, electron beam welded to a tough steel backer. Caps stand up to abuse and punishment, yet are lighter and easier to use than those of competitors. The positive rake tooth design provides better chip clearance as teeth cut into wood, plastic or any machinable metal. The 40mm cutting depth makes cutting through 2x4’s easy. A separate arbor is required.

HOLESAW

S 6

PLUMBOSSAUSTRALIA

7HO

LE S

AWS

AUST

RALI

A’S T

RUST

ED P

LUMB

ING

TOOL

BRA

ND

PRODUCT CODE DESCRIPTION DISCOUNT QTY.AV58 HOLE SAW 3 5/8” (92mm) MORSE MORSE 20 ASSORTEDAV60 HOLE SAW 3 3/4” (95mm) MORSE MORSE 20 ASSORTEDAV62 HOLE SAW 3 7/8” (98mm) MORSE MORSE 20 ASSORTEDAV64 HOLE SAW 4” (102mm) MORSE MORSE 20 ASSORTEDAV66 HOLE SAW 4 1/8” (105mm) MORSE MORSE 20 ASSORTEDAV68 HOLE SAW 4 1/4” (108mm) MORSE MORSE 20 ASSORTEDAV72 HOLE SAW 4 1/2” (114mm) MORSE MORSE 20 ASSORTEDAV76 HOLE SAW 4 3/4” (121mm) MORSE MORSE 20 ASSORTEDAV80 HOLE SAW 5” (127mm) MORSE MORSE 20 ASSORTEDAV88 HOLE SAW 5 1/2” (140mm) MORSE MORSE 20 ASSORTEDAV92 HOLE SAW 5 3/4” (146mm) MORSE MORSE 20 ASSORTED

AV96 HOLE SAW 6” (152mm) MORSE MORSE 20 ASSORTED

ACCESSORIES FOR AV SERIES HOLESAWSME12 EXTENSION ARBOR 12” (300mm) MORSE MORSE

MPD410 PILOT DRILL 1/4” MORSE MORSE MIN BUY 10M44 7/16” HEX ARBOR FOR AV09 - AV19 HOLE SAWS

M44K 7/16” HEX ARBOR FOR AV09 - AV96 HOLE SAWSM45 7/16” HEX ARBOR FOR AV20 - AV38 HOLE SAWS


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


‘AT’ SERIES

Designed for sawing holes in abrasive materials �

such as fibreglass, particle board,asbestos board, cast iron and Formica Tungsten Carbide Tooth Tips �

Ground and set teeth �

3 Teeth per inch �

Separate Arbor required �

Highest wear resistance �

Better chip clearance �

Long life in abrasive materials �

Cuts abrasive material bi-metal will not cut �

Fast cuts �

‘AT’ SERIES DISPLAY BOARD

Available up to 4”

ATF04 contains:

AT12 3/4” AT14 7/8” AT15 15/16” AT16 1” AT17 1 1/16”

AT18 1 1/8”

AT19 1 3/16”

AT20 1 1/4”

AT21 1 5/16”

AT22 1 3/8”

AT24 1 1/2”

AT26 1 5/8”

AT28 1 3/4”

AT30 1 7/8”

AT32 2”

AT33 2 1/16”

AT34 2 1/8”

AT36 2 1/4”

AT38 2 3/8”

AT40 2 1/2”

AT42 2 5/8”

AT44 2 3/4”

AT46 2 7/8”

AT48 3”

AT50 3 1/8”

AT52 3 1/4”

AT56 3 1/2”

AT64 4”


M34CT Arbor

M45PCT Arbor

MPD4CT Carbide Tipped Pilot Drill


10 X MPD410 Pilot Drill

7.2 TUNGSTEN CARBIDE TIPPED HOLE SAWS - MORSE

HOLESAW

S 8

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


‘AT’ SERIES

Designed for sawing holes in abrasive materials �

such as fibreglass, particle board,asbestos board, cast iron and Formica Tungsten Carbide Tooth Tips �

Ground and set teeth �

3 Teeth per inch �

Separate Arbor required �

Highest wear resistance �

Better chip clearance �

Long life in abrasive materials �

Cuts abrasive material bi-metal will not cut �

Fast cuts �

‘AT’ SERIES DISPLAY BOARD

Available up to 4”

ATF04 contains:

AT12 3/4” AT14 7/8” AT15 15/16” AT16 1” AT17 1 1/16”

AT18 1 1/8”

AT19 1 3/16”

AT20 1 1/4”

AT21 1 5/16”

AT22 1 3/8”

AT24 1 1/2”

AT26 1 5/8”

AT28 1 3/4”

AT30 1 7/8”

AT32 2”

AT33 2 1/16”

AT34 2 1/8”

AT36 2 1/4”

AT38 2 3/8”

AT40 2 1/2”

AT42 2 5/8”

AT44 2 3/4”

AT46 2 7/8”

AT48 3”

AT50 3 1/8”

AT52 3 1/4”

AT56 3 1/2”

AT64 4”


M34CT Arbor

M45PCT Arbor



10 X MPD410 Pilot Drill

7.2 TUNGSTEN CARBIDE TIPPED HOLE SAWS - MORSE

HOLESAW

S 8

PLUMBOSSAUSTRALIA

9 HO

LESA

WS

IMPO

RTER

S &

MANU

FACT

URER

SOF

PLUM

BING

EQUI

PMEN

T

‘AT’ SERIES HOLE SAW KITS

AT100 MAINTENANCE KIT This kit contains one each of 9 carbide hole saw sizes for installation of ½” - 2” pipe and conduit in abrasive materials

CONTAINS:AT12, 19mm AT14, 22mm AT18, 29mm AT22, 35mm AT24, 38mm AT28, 44mm AT32, 51mm AT36, 57mm AT40, 64mm 3 Arbors to suit ME12 Extension Arbor

AT9 HOLE SAW KIT CONTAINS:AT12, 19mm AT16, 25mm AT18, 29mm AT24, 38mm AT28, 44mm AT30, 48mm AT36, 57mm AT58, 92mm AT72, 114mm 3 Arbors to suit 1 Pilot Drill

AT4 HOLE SAW KIT CONTAINS:AT30, 48mm AT36, 57mmAT58, 92mm AT72, 114mm 3 Arbors to suit 1 Pilot Drill

7.2 TUNGSTEN CARBIDE TIPPED HOLE SAWS - MORSECONT

AT9 KIT DISPLAYED

AT100 MAINTENANCE KIT

DESIGNED FOR AUSTRALIANPLUMBERS BASED ON DWVPIPE SIZES

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


HOLESAW

S 10


PRODUCT CODE DESCRIPTION DISCOUNTQTY.

DISPLAY BOARDSATF04 CARBIDE TIPPED HOLE SAW DISPLAY BOARD - 4”

HOLE SAW KITSAT100 CARBIDE TIPPED HOLE SAW KIT MORSE

AT9KIT DWV PLUMBERS HOLE SAW KIT 9 PCE


INDIVIDUAL HOLE SAWSAT12 CARBIDE TIPPED HOLE SAW 3/4” (19mm) MORSE 20 ASSORTEDAT13 CARBIDE TIPPED HOLE SAW 13/16” (21mm) MORSE 20 ASSORTEDAT14 CARBIDE TIPPED HOLE SAW 7/8” (22mm) MORSE 20 ASSORTEDAT15 CARBIDE TIPPED HOLE SAW 15/16” (24mm) MORSE 20 ASSORTEDAT16 CARBIDE TIPPED HOLE SAW 1” (25mm) MORSE 20 ASSORTEDAT17 CARBIDE TIPPED HOLE SAW 1 1/16” (27mm) MORSE 20 ASSORTEDAT18 CARBIDE TIPPED HOLE SAW 1 1/8” (29mm) MORSE 20 ASSORTEDAT19 CARBIDE TIPPED HOLE SAW 1 3/16” (30mm) MORSE 20 ASSORTEDAT20 CARBIDE TIPPED HOLE SAW 1 1/4” (32mm) MORSE 20 ASSORTEDAT21 CARBIDE TIPPED HOLE SAW 1 5/16” (33mm) MORSE 20 ASSORTEDAT22 CARBIDE TIPPED HOLE SAW 1 3/8” (35mm) MORSE 20 ASSORTEDAT24 CARBIDE TIPPED HOLE SAW 1 1/2” (38mm) MORSE 20 ASSORTEDAT26 CARBIDE TIPPED HOLE SAW 1 5/8” (41mm) MORSE 20 ASSORTEDAT28 CARBIDE TIPPED HOLE SAW 1 3/4” (44mm) MORSE 20 ASSORTEDAT30 CARBIDE TIPPED HOLE SAW 1 7/8” (48mm) MORSE 20 ASSORTEDAT32 CARBIDE TIPPED HOLE SAW 2” (51mm) MORSE 20 ASSORTEDAT33 CARBIDE TIPPED HOLE SAW 2 1/16” (52mm) MORSE 20 ASSORTEDAT34 CARBIDE TIPPED HOLE SAW 2 1/8” (54mm) MORSE 20 ASSORTED AT36 CARBIDE TIPPED HOLE SAW 2 1/4” (57mm) MORSE 20 ASSORTEDAT37 CARBIDE TIPPED HOLE SAW 2 5/16” (59mm) MORSE 20 ASSORTEDAT38 CARBIDE TIPPED HOLE SAW 2 3/8” (60mm) MORSE 20 ASSORTEDAT40 CARBIDE TIPPED HOLE SAW 2 1/2” (64mm) MORSE 20 ASSORTEDAT41 CARBIDE TIPPED HOLE SAW 2 9/16” (65mm) MORSE 20 ASSORTEDAT42 CARBIDE TIPPED HOLE SAW 2 5/8” (67mm) MORSE 20 ASSORTEDAT44 CARBIDE TIPPED HOLE SAW 2 3/4” (70mm) MORSE 20 ASSORTEDAT46 CARBIDE TIPPED HOLE SAW 2 7/8” (73mm) MORSE 20 ASSORTEDAT48 CARBIDE TIPPED HOLE SAW 3” (76mm) MORSE 20 ASSORTED

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


HOLESAW

S 10


PRODUCT CODE DESCRIPTION DISCOUNTQTY.

DISPLAY BOARDSATF04 CARBIDE TIPPED HOLE SAW DISPLAY BOARD - 4”

HOLE SAW KITSAT100 CARBIDE TIPPED HOLE SAW KIT MORSE



INDIVIDUAL HOLE SAWSAT12 CARBIDE TIPPED HOLE SAW 3/4” (19mm) MORSE 20 ASSORTEDAT13 CARBIDE TIPPED HOLE SAW 13/16” (21mm) MORSE 20 ASSORTEDAT14 CARBIDE TIPPED HOLE SAW 7/8” (22mm) MORSE 20 ASSORTEDAT15 CARBIDE TIPPED HOLE SAW 15/16” (24mm) MORSE 20 ASSORTEDAT16 CARBIDE TIPPED HOLE SAW 1” (25mm) MORSE 20 ASSORTEDAT17 CARBIDE TIPPED HOLE SAW 1 1/16” (27mm) MORSE 20 ASSORTEDAT18 CARBIDE TIPPED HOLE SAW 1 1/8” (29mm) MORSE 20 ASSORTEDAT19 CARBIDE TIPPED HOLE SAW 1 3/16” (30mm) MORSE 20 ASSORTEDAT20 CARBIDE TIPPED HOLE SAW 1 1/4” (32mm) MORSE 20 ASSORTEDAT21 CARBIDE TIPPED HOLE SAW 1 5/16” (33mm) MORSE 20 ASSORTEDAT22 CARBIDE TIPPED HOLE SAW 1 3/8” (35mm) MORSE 20 ASSORTEDAT24 CARBIDE TIPPED HOLE SAW 1 1/2” (38mm) MORSE 20 ASSORTEDAT26 CARBIDE TIPPED HOLE SAW 1 5/8” (41mm) MORSE 20 ASSORTEDAT28 CARBIDE TIPPED HOLE SAW 1 3/4” (44mm) MORSE 20 ASSORTEDAT30 CARBIDE TIPPED HOLE SAW 1 7/8” (48mm) MORSE 20 ASSORTEDAT32 CARBIDE TIPPED HOLE SAW 2” (51mm) MORSE 20 ASSORTEDAT33 CARBIDE TIPPED HOLE SAW 2 1/16” (52mm) MORSE 20 ASSORTEDAT34 CARBIDE TIPPED HOLE SAW 2 1/8” (54mm) MORSE 20 ASSORTED AT36 CARBIDE TIPPED HOLE SAW 2 1/4” (57mm) MORSE 20 ASSORTEDAT37 CARBIDE TIPPED HOLE SAW 2 5/16” (59mm) MORSE 20 ASSORTEDAT38 CARBIDE TIPPED HOLE SAW 2 3/8” (60mm) MORSE 20 ASSORTEDAT40 CARBIDE TIPPED HOLE SAW 2 1/2” (64mm) MORSE 20 ASSORTEDAT41 CARBIDE TIPPED HOLE SAW 2 9/16” (65mm) MORSE 20 ASSORTEDAT42 CARBIDE TIPPED HOLE SAW 2 5/8” (67mm) MORSE 20 ASSORTEDAT44 CARBIDE TIPPED HOLE SAW 2 3/4” (70mm) MORSE 20 ASSORTEDAT46 CARBIDE TIPPED HOLE SAW 2 7/8” (73mm) MORSE 20 ASSORTEDAT48 CARBIDE TIPPED HOLE SAW 3” (76mm) MORSE 20 ASSORTED

PLUMBOSSAUSTRALIA

11

HOLE

SAW

SPL

UMBO

SSSU

PPLY

PLU

MBIN

G,IN

DUST

RIAL

,ELE

CTRI

CAL &

REF

RIGE

RATI

ONEQ

UIPM

ENT

INDIVIDUAL HOLE SAWSAT50 CARBIDE TIPPED HOLE SAW 3 1/8” (79mm) MORSE 20 ASSORTEDAT52 CARBIDE TIPPED HOLE SAW 3 1/4” (83mm) MORSE 20 ASSORTEDAT54 CARBIDE TIPPED HOLE SAW 3 3/8” (86mm) MORSE 20 ASSORTEDAT56 CARBIDE TIPPED HOLE SAW 3 1/2” (89mm) MORSE 20 ASSORTEDAT58 CARBIDE TIPPED HOLE SAW 3 5/8” (92mm) MORSE 20 ASSORTEDAT60 CARBIDE TIPPED HOLE SAW 3 3/4” (95mm) MORSE 20 ASSORTEDAT62 CARBIDE TIPPED HOLE SAW 3 7/8” (98mm) MORSE 20 ASSORTEDAT64 CARBIDE TIPPED HOLE SAW 4” (102mm) MORSE 20 ASSORTEDAT66 CARBIDE TIPPED HOLE SAW 4 1/8” (105mm) MORSE 20 ASSORTEDAT68 CARBIDE TIPPED HOLE SAW 4 1/4” (108mm) MORSE 20 ASSORTEDAT70 CARBIDE TIPPED HOLE SAW 4 3/8” (111mm) MORSE 20 ASSORTEDAT72 CARBIDE TIPPED HOLE SAW 4 1/2” (114mm) MORSE 20 ASSORTEDAT76 CARBIDE TIPPED HOLE SAW 4 3/4” (121mm) MORSE 20 ASSORTEDAT80 CARBIDE TIPPED HOLE SAW 5” (127mm) MORSE 20 ASSORTEDAT88 CARBIDE TIPPED HOLE SAW 5 1/2” (140mm) MORSE 20 ASSORTEDAT92 CARBIDE TIPPED HOLE SAW 5 3/4” (146mm) MORSE 20 ASSORTEDAT96 CARBIDE TIPPED HOLE SAW 6” (152mm) MORSE 20 ASSORTED

ACCESSORIES FOR ‘AT’ SERIESM34CT ARBOR FOR AT12-AT19 w/-CARBIDE TIPPED PILOT DRILL

M45PCT ARBOR FOR AT20-AT96 w/-CARBIDE TIPPED PILOT DRILL ME12 ARBOR EXTENSION 12” (300mm) MORSE MORSE

MPD4CT CARBIDE TIPPED PILOT DRILL 4” X 1/4” MORSEMPD45CT CARBIDE TIPPED PILOT DRILL 2 7/8” MORSEMPD410 PILOT DRILL 1/4” MORSE MIN BUY 10


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


PRODUCT CODE DESCRIPTIONAXCCLUH 250ml AXXAIR LUBE

PRODUCT CODE DESCRIPTIONTBMH PlumBOSS HOLE SAW TOOL BOX

7.3 HOLE SAW LUBRICANT

7.4 HOLE SAW TOOL BOX

Axxair Lube is best used for �

stainless steel and hard metals.

No more time wasted searching the back �

of the Ute looking for that hole saw, that you probably left at the last job site

The plumBOSS Hole Saw Tool Box is a great way �

to keep track of your hole saws and arbors.

It is designed to accommodate both the �

built in arbor hole saws and hole saws that need an arbor attachment

KEEP TRACK OF YOUR HOLE SAWS

HOLESAW

S 12

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


PRODUCT CODE DESCRIPTIONAXCCLUH 250ml AXXAIR LUBE

PRODUCT CODE DESCRIPTIONTBMH PlumBOSS HOLE SAW TOOL BOX

7.3 HOLE SAW LUBRICANT

7.4 HOLE SAW TOOL BOX

Axxair Lube is best used for �

stainless steel and hard metals.

No more time wasted searching the back �

of the Ute looking for that hole saw, that you probably left at the last job site

The plumBOSS Hole Saw Tool Box is a great way �

to keep track of your hole saws and arbors.

It is designed to accommodate both the �


KEEP TRACK OF YOUR HOLE SAWS

HOLESAW

S 12

PLUMBOSSAUSTRALIA

8sheet metal

8.1 METALMASTER SNIPS 2

8.2 OFFSET SNIPS - WISS 2

8.3 HEAVY DUTY SNIPS - WISS 3

8.4 WISS SNIP SPRINGS 3

8.5 PLUMBOSS AVIATION SNIP 4

8.6 SNIPS 5

8.7 JEWELLERS’ SNIPS 5

8.8 HEAVY DUTY SHEARS 6

8.9 PARTS FOR SNIPS 6

8.10 HEAVY DUTY TURBO SHEAR 7

8.11 DRESSERS & MALLETS 7

8.12 PUNCHES 8

8.13 KLIKIN 11

8.14 SHEET METAL CRIMPERS 12

8.15 SHEET METAL FOLDER 12

8.16 RIVETERS 13

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


8.1 METALMASTER SNIPS

8.2 OFFSET SNIPS - WISS

PRODUCT CODE DESCRIPTION BOX QTYM1R AVIATION SNIP RED - CUTS LEFT WISS 30M2R AVIATION SNIP GREEN - CUTS RIGHT WISS 30M3R AVIATION SNIP YELLOW - CUTS STRAIGHT WISS 30

PRODUCT CODE DESCRIPTION BOX QTY.M6R OFFSET SNIP RED - CUTS LEFT WISS 6M7R OFFSET SNIP GREEN - CUTS RIGHT WISS 6

Metal Master snips have become the favourite �

of most craftsmen who work with metal Used in gutter and flashing work,�

fabrication of heating and cooling ducts and for aluminium siding installation Versatile, superior cutting qualities. �

Cut acute angles, complex patterns and�

perfect circles of even small diameter in galvanised steel up to 18 gauge (0.49”)

Jaws made of extra tough and wear�

resistant special molybdenum steel Cut flat sheet metal without distortion to cut edges �

Hot drop forged and polished jaws for smooth �

action, combined with cleaner cutting

Offset design keeps hands safely �

above work on long inside cuts.

M3R

M1R

M2R

M6R

M7R

SHEET METAL 2

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


8.1 METALMASTER SNIPS

8.2 OFFSET SNIPS - WISS

PRODUCT CODE DESCRIPTION BOX QTYM1R AVIATION SNIP RED - CUTS LEFT WISS 30M2R AVIATION SNIP GREEN - CUTS RIGHT WISS 30M3R AVIATION SNIP YELLOW - CUTS STRAIGHT WISS 30

PRODUCT CODE DESCRIPTION BOX QTY.M6R OFFSET SNIP RED - CUTS LEFT WISS 6M7R OFFSET SNIP GREEN - CUTS RIGHT WISS 6

Metal Master snips have become the favourite �

of most craftsmen who work with metal Used in gutter and flashing work,�

fabrication of heating and cooling ducts and for aluminium siding installation Versatile, superior cutting qualities. �

Cut acute angles, complex patterns and�

perfect circles of even small diameter in galvanised steel up to 18 gauge (0.49”)

Jaws made of extra tough and wear�

resistant special molybdenum steel Cut flat sheet metal without distortion to cut edges �

Hot drop forged and polished jaws for smooth �

action, combined with cleaner cutting

Offset design keeps hands safely �

above work on long inside cuts.

M3R

M1R

M2R

M6R

M7R

SHEET METAL 2

PLUMBOSS AUSTRALIA

PRODUCT CODE DESCRIPTION BOX QTY.M1RSI HEAVY DUTY SNIP-CUTS LEFT WISS 6M2RSI HEAVY DUTY SNIP-CUTS RIGHT WISS 6

PRODUCT CODE DESCRIPTION BOX QTY.P406 WISS SNIP SPRINGS (CARD OF 3)P407 WISS SNIP SPRINGS (CARD OF 3)

8.3 HEAVY DUTY SNIP - WISS

8.4 WISS SNIP SPRINGS

For Hard Metals - eg. Stainless Steel �

Blue Handles �

P406: Springs to suit M1R/M3R/M5R/M6R

P407: Springs to suit M2R/M7R

3SH

EET

META

LSE

RVIN

G AU

STRA

LIA’S

TRA

DESM

EN S

INCE

198

6

M2RSI

M1RSI

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


PRODUCT CODE DESCRIPTION DISCOUNT QTY.PB751 AVIATION SNIP RED CUTS LEFT PLUMBOSS 6 AND 36PB752 AVIATION SNIP GREEN CUTS RIGHT PLUMBOSS 6 AND 36PB753 AVIATION SNIP YELLOW CUTS STRAIGHT PLUMBOSS 6 AND 36PB765 OFFSET SNIP RED CUTS LEFT PLUMBOSS 6 AND 36PB766 OFFSET SNIP GREEN CUTS RIGHT PLUMBOSS 6 AND 36PB756 LONG CUT SNIP PLUMBOSS 6 AND 36

8.5 PLUMBOSS AVIATION SNIP WITH FREE HOLSTER WHILE STOCKS LAST

Perfect for both professional and DIY �

Drop forged Molybdenum Alloy �

steel, Sand blasted finish

Induction hardened cutting edges 60-62 HRC �

Cuts up to 1.5mm cold rolled steel�

and up to 1.0mm for stainless steel

Offset design keeps hands safely above work�

Long Cut snips can also cut up to 1mm cold �

rolled steel or 0.6mm stainless steel 58-60 HRC

Bi Mat Vinyl Grips�

SHEET METAL 4

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


PRODUCT CODE DESCRIPTION DISCOUNT QTY.PB751 AVIATION SNIP RED CUTS LEFT PLUMBOSS 6 AND 36PB752 AVIATION SNIP GREEN CUTS RIGHT PLUMBOSS 6 AND 36PB753 AVIATION SNIP YELLOW CUTS STRAIGHT PLUMBOSS 6 AND 36PB765 OFFSET SNIP RED CUTS LEFT PLUMBOSS 6 AND 36PB766 OFFSET SNIP GREEN CUTS RIGHT PLUMBOSS 6 AND 36PB756 LONG CUT SNIP PLUMBOSS 6 AND 36

8.5 PLUMBOSS AVIATION SNIP WITH FREE HOLSTER WHILE STOCKS LAST

Perfect for both professional and DIY �

Drop forged Molybdenum Alloy �

steel, Sand blasted finish

Induction hardened cutting edges 60-62 HRC �

Cuts up to 1.5mm cold rolled steel�

and up to 1.0mm for stainless steel

Offset design keeps hands safely above work�

Long Cut snips can also cut up to 1mm cold �

rolled steel or 0.6mm stainless steel 58-60 HRC

Bi Mat Vinyl Grips�

SHEET METAL 4

PLUMBOSS AUSTRALIA

8.6 SNIPS

8.7 JEWELLERS’ SNIPS 5

SHEE

T ME

TAL

PLUM

BOSS

- AU

STRA

LIA’S

OW

N PL

UMBI

NG T

OOL S

PECI

ALIS

TS

PRODUCT CODE DESCRIPTION BOX QTY.G245-10 STRAIGHT SNIP 10” (250mm) 6G245-12 STRAIGHT SNIP 12” (300mm) 6G245-14 STRAIGHT SNIP 14” (350mm) 6G246-12 CURVED SNIP 12” (300mm) 6PB29714 14” STRAIGHT SNIP N/APB29712 12” STRAIGHT SNIP N/APB29710 10” STRAIGHT SNIP N/APB29708 8” STRAIGHT SNIP N/A

PRODUCT CODE DESCRIPTION BOX QTY.G56 JEWELLERS SNIP STRAIGHT 7” (175mm) 6

G056 JEWELLERS SNIP CURVED 7” (175mm) 6PB29707 JEWELLERS SNIP STRAIGHT 7” (180mm) 6

Drop forged from carbon tool steel, hardened,�

tempered ground, glazed, assembled and tested Tested to guarantee the blades �

will cut right to the end Snips and Shears have a cutting capacity much �

greater than the strength of the individual user. Tests indicate that for most people the comfortable limit is 18 gauge mild steel, 23 stainless steel or their equivalents, but if you have strong hands, heavier gauges can be cut with safety. G245 General Purpose Snips - for straight and off-straight cutting. G246 Curved Blade Snips- designed to compliment the G245 range; these snips will make tight radius cuts in a clockwise or anti-clockwise direction.

Short bladed light duty snips, often used by jewellers, silversmiths, and model makers. Available in a straight blade (G56, PB29707) and a curved blade version (G056)

29-710

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


8.8 HEAVY DUTY SHEARS

8.9 PARTS FOR SNIPS

PRODUCT CODE DESCRIPTION BOX QTY.G950 H/DUTY STRAIGHT SHEARS 12” 6G69 H/DUTY CRANKED SHEARS - RIGHT 11” 6

G691 H/DUTY CRANKED SHEARS - RIGHT 14” 6G67 H/DUTY CRANKED SHEARS - LEFT 11” 6

PRODUCT CODE DESCRIPTIONG10NB NUT AND BOLT TO SUIT 10” SNIPS G12NB NUT AND BOLT TO SUIT 12” SNIPS G14NB NUT AND BOLT TO SUIT 14” SNIPS G56NB NUT AND BOLT TO SUIT JEWELLERS SNIPS G69NB NUT AND BOLT TO SUIT H/DUTY SHEARS

In addition to the G950’s used for straight cutting, this range includes three crank handled shears which can also be used for off-straight cutting. The G69 and G691 are right-hand cranked for working anti- clockwise and G67 is left-hand cranked for working clockwise.

Nuts and bolts available for all models: please specify model number when ordering.

G691

G950

G691

G67

SHEET METAL 6

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


8.8 HEAVY DUTY SHEARS

8.9 PARTS FOR SNIPS

PRODUCT CODE DESCRIPTION BOX QTY.G950 H/DUTY STRAIGHT SHEARS 12” 6G69 H/DUTY CRANKED SHEARS - RIGHT 11” 6G691 H/DUTY CRANKED SHEARS - RIGHT 14” 6G67 H/DUTY CRANKED SHEARS - LEFT 11” 6

PRODUCT CODE DESCRIPTIONG10NB NUT AND BOLT TO SUIT 10” SNIPS G12NB NUT AND BOLT TO SUIT 12” SNIPS G14NB NUT AND BOLT TO SUIT 14” SNIPS G56NB NUT AND BOLT TO SUIT JEWELLERS SNIPS G69NB NUT AND BOLT TO SUIT H/DUTY SHEARS

In addition to the G950’s used for straight cutting, this range includes three crank handled shears which can also be used for off-straight cutting. The G69 and G691 are right-hand cranked for working anti- clockwise and G67 is left-hand cranked for working clockwise.

Nuts and bolts available for all models: please specify model number when ordering.

G691

G950

G691

G67

SHEET METAL 6

PLUMBOSS AUSTRALIA

8.10 HEAVY DUTY TURBO SHEAR

7SH

EET

META

LAU

STRA

LIA’S

TRU

STED

PLU

MBIN

G TO

OL B

RAND

8.11 DRESSERS & MALLETS

PRODUCT CODE DESCRIPTION BOX QTY.TSHD TURBO SHEAR 3

TSHDRB REPLACEMENT BLADES (PAIR) FOR TSHD N/A

PRODUCT CODE DESCRIPTIONLD1 LEAD DRESSER

BES2 BENDING STICK BOS3 BOSSING STICKTIM5 TINSMANS MALLET

The TSHD have heavy-duty jaws and gearing that make it suitable for cutting 18 gauge galvanized steel and most other common sheet metals. The TSHD fits most 14.4-volt or larger A/C or cordless drills. It cuts straight and to the left. It even makes angled crosscuts through profiles of metal building panels and stone coated metal shingles! It can be repositioned upside down as necessary for greater manoeuvrability. Blind cuts require a 1” starting hole.

LD1

BES2BOS3

For use on sheet lead, aluminium or iron flashing

TIM5

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


8.12 PUNCHES

CHASSIS PUNCHES

Round standard metal punch units are complete �

units consisting of punch, die and draw stud Properly assembled through pilot holes,�

they will make clean, fast and accurate holes Economical 2-point design �

Requires less manual force�

than 3 & 4 point punches Less force means less draw �

stud strain and longer life Cuts holes in stainless steel eg.�

Sinks up to 20 gauge or 1mm Garbage Hole Cutter presses �

rebate after enlarging hole

ROOFING PUNCH

PRODUCT CODE DESCRIPTIONCP22 CHASSIS PUNCH ⅞” (22mm)CP25 CHASSIS PUNCH 1” (25mm)CP32 CHASSIS PUNCH 1 ¼” (32mm)CP35 CHASSIS PUNCH 1 ⅜” (35mm)

GHC01 GARBAGE HOLE CUTTER (83mm)GHC01HD GARBAGE HOLE CUTTER (83mm) HEAVY DUTY

PRODUCT CODE DESCRIPTIONRP02 ROOFING PUNCH

CHASIS PUNCH

GARBAGE HOLE CUTTER

SHEET METAL 8

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


8.12 PUNCHES

CHASSIS PUNCHES

Round standard metal punch units are complete �

units consisting of punch, die and draw stud Properly assembled through pilot holes,�

they will make clean, fast and accurate holes Economical 2-point design �

Requires less manual force�

than 3 & 4 point punches Less force means less draw �

stud strain and longer life Cuts holes in stainless steel eg.�

Sinks up to 20 gauge or 1mm Garbage Hole Cutter presses �

rebate after enlarging hole

ROOFING PUNCH

PRODUCT CODE DESCRIPTIONCP22 CHASSIS PUNCH ⅞” (22mm)CP25 CHASSIS PUNCH 1” (25mm)CP32 CHASSIS PUNCH 1 ¼” (32mm)CP35 CHASSIS PUNCH 1 ⅜” (35mm)

GHC01 GARBAGE HOLE CUTTER (83mm)GHC01HD GARBAGE HOLE CUTTER (83mm) HEAVY DUTY

PRODUCT CODE DESCRIPTIONRP02 ROOFING PUNCH

CHASIS PUNCH

GARBAGE HOLE CUTTER

SHEET METAL 8

PLUMBOSS AUSTRALIA

8.12 PUNCHESCONT

9SH

EET

META

LTH

E TU

BE &

PIP

E TO

OL S

PECI

ALIS

TS

HYDRAULIC PUNCHES

These permit the punching of holes into both mild steel, and stainless steel sheets quickly and with very little effort, clean and without burrs. There are four different styles of punching units:

Compact Hand Hydraulic Puncher

Practical hand puncher without hose and cylinder�

Ideal for workshop and work on construction sites�

Aluminium version – only 1.6kg �

Compact-Combi Hand Hydraulic Puncher

Suitable for confined working conditions�

90° offset, 360° revolving head�

Hand Pump Hydraulic Puncher

Two step operation�

Max operating pressure 700 bar�

Installed pump safety valve �

Foot Pump Hydraulic Puncher

Installed pump safety valve�

2.8m hose�

Max operating pressure 700 bar�

PRODUCT CODE DESCRIPTION02001 COMPACT HAND HYDRAULIC PUNCHER - ALUMINIUM VERSION02050 COMPACT-COMBI HAND HYDRAULIC PUNCHER 360° SWIVEL02110 HAND PUMP HYDRAULIC PUNCHER w/- 0.9m HOSE02120 FOOT PUMP HYDRAULIC PUNCHER w/- 2.8m HOSE

ALL PUNCHES COME WITH CASE AND ACCESSORIES (PUNCH & DIES NOT INCLUDED)

02001

02050

02110

02120

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


8.12 PUNCHESCONT

BATTERY PUNCH

This high performance and extremely manageable and light weight punch is the latest in punching technology. This unit is light and handy, ergonomic design, and weighs only 3.7kg including the high performance 18 volt rechargeable battery.

PUNCHES & DIES

TRI STAR PUNCH AND DIES

Tri Star punches and dies make light work of even the thickest sheet metal. By splitting the coupon in three pieces, the Tri Star punch eliminates the risk of blocking at the tension screw, and wearing down the life of the tool. These punches can be used with a bolt on their own, or preferably with the Hydraulic punching units. Thickness of sheet steel: 2mm normal steel ST.37.

PUNCHES AND DIES FOR STAINLESS STEEL ARE ALSO AVAILABLE

PRODUCT CODE DESCRIPTION02070 BATTERY POWERED COMPACT HYDRAULIC PUNCH

PRODUCT CODE DESCRIPTION01770 PUNCH & DIE 12.5mm (Tri-split) MILD STEEL ONLY 01772 PUNCH & DIE 16.2mm (Tri-split) MILD STEEL ONLY 01774 PUNCH & DIE 20.4mm (Tri-split) MILD STEEL ONLY01775 PUNCH & DIE 22.5mm (Tri-split) MILD STEEL ONLY 01776 PUNCH & DIE 25.4mm (Tri-split) MILD STEEL ONLY01779 PUNCH & DIE 30.5mm (Tri-split) MILD STEEL ONLY 01780 PUNCH & DIE 32.5mm (Tri-split) MILD STEEL ONLY 01781 PUNCH & DIE 37mm (Tri-split) MILD STEEL ONLY 01782 PUNCH & DIE 40.5mm (Tri-split) MILD STEEL ONLY01784 PUNCH & DIE 50.5mm (Tri-split) MILD STEEL ONLY01787 PUNCH & DIE 63.5mm (Tri-split) MILD STEEL ONLY 01225 PUNCH & DIE 75.5mm (standard) MILD STEEL ONLY

01257-8 PUNCH & DIE 100.5mm (standard) MILD STEEL ONLY01398 PISTON SHAFT & BLOCKING NUT (only for 100.5mm)

SHEET METAL 10

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


8.12 PUNCHESCONT

BATTERY PUNCH

This high performance and extremely manageable and light weight punch is the latest in punching technology. This unit is light and handy, ergonomic design, and weighs only 3.7kg including the high performance 18 volt rechargeable battery.

PUNCHES & DIES

TRI STAR PUNCH AND DIES

Tri Star punches and dies make light work of even the thickest sheet metal. By splitting the coupon in three pieces, the Tri Star punch eliminates the risk of blocking at the tension screw, and wearing down the life of the tool. These punches can be used with a bolt on their own, or preferably with the Hydraulic punching units. Thickness of sheet steel: 2mm normal steel ST.37.

PUNCHES AND DIES FOR STAINLESS STEEL ARE ALSO AVAILABLE

PRODUCT CODE DESCRIPTION02070 BATTERY POWERED COMPACT HYDRAULIC PUNCH

PRODUCT CODE DESCRIPTION01770 PUNCH & DIE 12.5mm (Tri-split) MILD STEEL ONLY 01772 PUNCH & DIE 16.2mm (Tri-split) MILD STEEL ONLY 01774 PUNCH & DIE 20.4mm (Tri-split) MILD STEEL ONLY01775 PUNCH & DIE 22.5mm (Tri-split) MILD STEEL ONLY 01776 PUNCH & DIE 25.4mm (Tri-split) MILD STEEL ONLY01779 PUNCH & DIE 30.5mm (Tri-split) MILD STEEL ONLY 01780 PUNCH & DIE 32.5mm (Tri-split) MILD STEEL ONLY 01781 PUNCH & DIE 37mm (Tri-split) MILD STEEL ONLY 01782 PUNCH & DIE 40.5mm (Tri-split) MILD STEEL ONLY01784 PUNCH & DIE 50.5mm (Tri-split) MILD STEEL ONLY01787 PUNCH & DIE 63.5mm (Tri-split) MILD STEEL ONLY 01225 PUNCH & DIE 75.5mm (standard) MILD STEEL ONLY

01257-8 PUNCH & DIE 100.5mm (standard) MILD STEEL ONLY01398 PISTON SHAFT & BLOCKING NUT (only for 100.5mm)

SHEET METAL 10

PLUMBOSS AUSTRALIA

11SH

EET

META

LIM

PORT

ERS

& MA

NUFA

CTUR

ERS

OF P

LUMB

ING

EQUI

PMEN

T

8.12 PUNCHESCONT

8.13 KLIKIN

STUD PUNCH

STP710 fast punches stud without �

the need of predrillingCan be used in tubing and wiring installations�

Punches 34.1mm DIA hole in up to 0.9mm thick steel�

PlumBOSS innovative design�

Single click action�

Flexible fingers allow ½”, ¾” or 1”�

tube to fit into the one size KLIKIN!Top hat design helps the brim tension the �

clips against stud resulting in an easy firm fit.

PRODUCT CODE DESCRIPTIONSTP710GM KLIKINS TO SUIT STP710 (100PK) plumBOSS

PRODUCT CODE DESCRIPTIONSTP710 STUD PUNCH 34.1mm 20 gauge cap. REED

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


SHEET METAL 12

8.14 SHEET METAL CRIMPERS

8.15 SHEET METAL FOLDER

5 BLADE CRIMPER - MALCOEasy hand motion and greater control. A�

superior, compound leverage mechanism offers maximum ease of operation. Comfortable opening, spring - activated handles, vinyl cushioned grips, and carefully placed hand stops

combine to give you even more comfort and control.

Longer lasting performance. Wear resistant,�

hardened steel construction features heavy duty linkage between handle and jaws, plus a closing stop to maintain the same crimp profile over the life of the tool. Hardened steel

also produces greater handle strength to stand up to abuse and resist collapsing.

Longer, shallowed crimps produced�

with the C5 result in a tighter, more self supporting, leak proof connection

3 BLADE CRIMPER - MALCOIdeal for crimping heavy 22 and 24 gauge sheet metal

SINGLE BLADE CRIMPER - MALCOFast, easy to use and lightweight. Handy lock makes tool pocket sized. Zinc plated steel.

PRODUCT CODE DESCRIPTION BOX QTY.C5 SHEET METAL OR FLUE CRIMPER FIVE BLADE MALCO 6

MSC3 SHEET METAL OR FLUE CRIMPER THREE BLADE MALCO 4MSC1 SHEET METAL OR FLUE CRIMPER SINGLE BLADE MALCO SINGLE

PRODUCT CODE DESCRIPTION8R SHEET METAL FOLDER VICE GRIP

C5

METAL CRIMPER IN USE

MSC1

MSC3

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


SHEET METAL 12

8.14 SHEET METAL CRIMPERS

8.15 SHEET METAL FOLDER

5 BLADE CRIMPER - MALCOEasy hand motion and greater control. A�

superior, compound leverage mechanism offers maximum ease of operation. Comfortable opening, spring - activated handles, vinyl cushioned grips, and carefully placed hand stops

combine to give you even more comfort and control.

Longer lasting performance. Wear resistant,�

hardened steel construction features heavy duty linkage between handle and jaws, plus a closing stop to maintain the same crimp profile over the life of the tool. Hardened steel

also produces greater handle strength to stand up to abuse and resist collapsing.

Longer, shallowed crimps produced�

with the C5 result in a tighter, more self supporting, leak proof connection

3 BLADE CRIMPER - MALCOIdeal for crimping heavy 22 and 24 gauge sheet metal

SINGLE BLADE CRIMPER - MALCOFast, easy to use and lightweight. Handy lock makes tool pocket sized. Zinc plated steel.

PRODUCT CODE DESCRIPTION BOX QTY.C5 SHEET METAL OR FLUE CRIMPER FIVE BLADE MALCO 6

MSC3 SHEET METAL OR FLUE CRIMPER THREE BLADE MALCO 4MSC1 SHEET METAL OR FLUE CRIMPER SINGLE BLADE MALCO SINGLE

PRODUCT CODE DESCRIPTION8R SHEET METAL FOLDER VICE GRIP

C5

METAL CRIMPER IN USE

MSC1

MSC3

PLUMBOSS AUSTRALIA

8.16 RIVETERS

13SH

EET

META

LPL

UMBO

SS S

UPPL

Y PL

UMBI

NG, I

NDUS

TRIA

L, E

LECT

RICA

L & R

EFRI

GERA

TION

EQU

IPME

NT

EG-2060 - Handy-man Riveter

TT55D - Tucker Pop Riveter is a heavy duty plier type tool suitable for low volume production.

It is ideal for fastening applications in the field.

All steel parts are hardened and tempered for maximum life. It will set up to 32mm Nickel/Copper and 4mm steel.

REPLACEMENT PARTS:

PO25266 – Fulcrum Pin

PO25268 – Fulcrum Pin R Clip

PO25286 – Power Unit

PO25278 – Set of Two Jaws

OTHER REPLACEMENT PARTS ARE AVAILABLE FOR THE TT55D

PO25266/PO25268

PO25286

TT55D

EG2060

PO25278

PRODUCT CODE DESCRIPTION DISCOUNT QTY.EG-2060 HAND RIVETER ETC N/ATT55D TUCKER POP RIVETER 5 AND 10

PO25266 FULCRUM PIN N/APO25268 FULCRUM PIN R CLIP N/APO25286 POWER UNIT N/APO25278 SET OF TWO JAWS N/A

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9general tools

9.1 APPRENTICE KITS 3

9.2 BUCKET MATE & TOOL BOXES 5

9.3 ABRASIVE DISCS 6

9.4 BLADES - DIAMOND 6

9.5 HAND SAWS 7

9.6 HACK SAWS 8

9.7 THREADED ROD CUTTERS 9

9.8 BOLT CUTTERS 9

9.9 NIPPLE CUTTERS 10

9.10 DRILL BITS 10

9.11 KNIVES 19

9.12 SCREW DRIVERS 20

9.13 SCREW DRIVER BITS 21

9.14 KEY SETS - BONDHUS 23

9.15 SOCKET SETS 24

9.16 PLIERS 25

FOR PART 2 OF CONTENTS TURN OVER

hand tools hand picked by tradesmen for tradesmen.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.20 MEASURING WHEEL 30

9.21 LEVELS 31

9.22 SPOT MARKING PAINT 31

9.23 CHALK LINES & REPLACEMENTS 32

9.24 STRING LINES 32

9.25 PLUMB BOB 32

9.26 PENCILS & CRAYONS 33

9.27 DOUBLE ENDED SCRIBER 33

9.28 TAP PULLER 33

9.29 TAP RESEATERS 34

9.30 RIVETERS 35

9.31 CAULKING GUNS 36

9.32 BRUSHES 36

9.33 RUBBER BUCKET 37

9.34 FILES 37

9.35 STRAPS 38

9.36 MIRRORS 39

9.37 NAIL BAGS 39

9.38 POWER LEADS & LEAD HOOKS 40

9.39 SAFETY GEAR 40

9.40 BRICK BOLSTER 41

9.41 CHISELS 41

9.42 HAMMERS 42

9.43 CROW BARS & WRECKING BARS 43

9.44 SHOVELS / PICKS / HANDLES 43

9.45 TROWELS / FLOATS 44

9.46 WORK LIGHT 44

9.17 BEVELS 29

9.18 SQUARES & RULERS 29

9.19 TAPE MEASURES 30

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.20 MEASURING WHEEL 30

9.21 LEVELS 31

9.22 SPOT MARKING PAINT 31

9.23 CHALK LINES & REPLACEMENTS 32

9.24 STRING LINES 32

9.25 PLUMB BOB 32

9.26 PENCILS & CRAYONS 33

9.27 DOUBLE ENDED SCRIBER 33

9.28 TAP PULLER 33

9.29 TAP RESEATERS 34

9.30 RIVETERS 35

9.31 CAULKING GUNS 36

9.32 BRUSHES 36

9.33 RUBBER BUCKET 37

9.34 FILES 37

9.35 STRAPS 38

9.36 MIRRORS 39

9.37 NAIL BAGS 39

9.38 POWER LEADS & LEAD HOOKS 40

9.39 SAFETY GEAR 40

9.40 BRICK BOLSTER 41

9.41 CHISELS 41

9.42 HAMMERS 42

9.43 CROW BARS & WRECKING BARS 43

9.44 SHOVELS / PICKS / HANDLES 43

9.45 TROWELS / FLOATS 44

9.46 WORK LIGHT 44

9.17 BEVELS 29

9.18 SQUARES & RULERS 29

9.19 TAPE MEASURES 30

9.1 APPRENTICE KITS

The famous Plumboss Apprentice kits have everything an apprentice will need to start their career as a plumber. These kits are easily affordable. Even more so for those who are eligible for the ‘Tools For Your Trade’ Australian Government Initiative. There are three kits to choose from, as listed below:

AKN01 –

¼” – ¾” FLARING TOOL½” – ¾” PLUMBOSS EXPANDER¾” PLUMBOSS TUBE BENDER½” PLUMBOSS TUBE BENDER½” EXTERNAL BENDING SPRING½” INTERNAL BENDING SPRING¾” EXTERNAL BENDING SPRING¾” INTERNAL BENDING SPRINGREED POCKET DEBURRER BUCKET MATE CANVAS TOOL POUCH

AKN02 –

14” FASGRIP ONE HAND PIPE WRENCHSUREFIRE MAPP GAS® TORCH42mm TELESCOPIC TUBE CUTTER 32mm PLUMBOSS POLY SCISSOR SHEARSSHEETMETAL FOLDER VICE GRIP13” XPERT VENEER SAW – JACKPLUMBERS HOLE SAW KIT – MORSE⅜” – 1 ¼” TELESCOPIC BASIN WRENCH – SILVASWIFT SEATER PRECISION RESEATERPRO-GUN WEXFORD1” POLY SQUEEZE OFF TOOL22mm PLUMBOSS MINI CUTTER19” PLUMBOSS TOOL BOX WITH TOTE TRAY

3 GE

NERA

L TOO

LSSE

RVIN

GAU

STRA

LIA’S

TRAD

ESME

NSI

NCE

1986

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


PRODUCT CODE DESCRIPTIONAKN01 APPRENTICE KIT No. 1AKN02 APPRENTICE KIT No. 2

AKN03 APPRENTICE KIT No. 3

AKN03 –

300mm COMBI SQUARE PLUMB BOB600mm SPIRIT LEVEL 10” BASTARD FILE2 POCKET NAIL BAG SLIDING BEVEL8m x 25mm TAPE MEASURE20mm COLD CHISELFOLDING RULE FIBREGLASS HANDLE CLAW HAMMER225mm FOOTPRINTS 3lb LUMP HAMMERPLUGGING CHISEL 1/8” - 1 1/8” COPPER TUBE CUTTER 13PCE SCREWDRIVER SETQUICK FLARE250mm MULTI GRIPS GROOVE JOINTPOP RIVETER10” SNIPS SQUARE FRAME HACKSAW200mm COMBINATION PLIERSRH AVIATION SNIPS8” IREGA SHIFTER LH AVIATION SNIPS12” IREGA SHIFTER 19” TOOL BOX WITH TOTE TRAY

9.1 APPRENTICE KITSCONT

GENERAL TOOLS 4

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


PRODUCT CODE DESCRIPTIONAKN01 APPRENTICE KIT No. 1AKN02 APPRENTICE KIT No. 2

AKN03 APPRENTICE KIT No. 3

AKN03 –

300mm COMBI SQUARE PLUMB BOB600mm SPIRIT LEVEL 10” BASTARD FILE2 POCKET NAIL BAG SLIDING BEVEL8m x 25mm TAPE MEASURE20mm COLD CHISELFOLDING RULE FIBREGLASS HANDLE CLAW HAMMER225mm FOOTPRINTS 3lb LUMP HAMMERPLUGGING CHISEL 1/8” - 1 1/8” COPPER TUBE CUTTER 13PCE SCREWDRIVER SETQUICK FLARE250mm MULTI GRIPS GROOVE JOINTPOP RIVETER10” SNIPS SQUARE FRAME HACKSAW200mm COMBINATION PLIERSRH AVIATION SNIPS8” IREGA SHIFTER LH AVIATION SNIPS12” IREGA SHIFTER 19” TOOL BOX WITH TOTE TRAY

9.1 APPRENTICE KITSCONT

GENERAL TOOLS 4

PLUMBOSSAUSTRALIA

9.2 BUCKET MATE & TOOL BOXES

5 GE

NERA

L TOO

LSPL

UMBO

SS -

AUST

RALI

A’S O

WN

PLUM

BING

TOOL

SPE

CIAL

ISTS

BM01 – Bucket Mate is a canvas tool pouch that fits over a bucket while holding tools inside and around the outside of the bucket.

TB19 – Plumboss Tool Box is 560mm long and comes with a tote tray. It has large suitcase style latches.

TBMH - No more time wasted searching the back of the Ute looking for that hole saw, that you probably left at the last job site

The plumBOSS Hole Saw Tool Box is a great �

way to keep track of your hole saws and arbor.It is designed to accommodate both �


PRODUCT CODE DESCRIPTIONTB19 PLUMBOSS TOOL BOX

TB19WTP PLUMBOSS TOOL BOX (DISCOUNTED WITH A $100 TOOL ORDER)BM01 BUCKET MATE

TBMH PlumBOSS HOLE SAW TOOL BOX

TOOLS NOT INCLUDED

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.3 ABRASIVE DISCS - CUT OFF WHEELS

9.4 BLADES - DIAMOND T20S - Turbo Super - Wet or Dry

High performance wet or dry cutting of marble, clay bricks, terracotta, ceramic tiles, fibrous cement sheets, terrazzo. (Not suitable for abrasive materials such as blocks/concrete pavers.)

4TR1000 - Tile Turbo - Wet or Dry

A thinner style turbo designed for sharp cleaning of tough ceramic tiles. (Not suitable for abrasive materials such as concrete block/concrete pavers etc.) The T20T blade is also a very good handyman blade for general purpose use.

PRODUCT CODE DESCRIPTIONT20S4 SUPER TURBO DIAMOND BLADE 4” (100mm)

4TR1000 TILE TURBO DIAMOND BLADE 4” (100mm)

T20S45 SUPER TURBO DIAMOND BLADE 4 ½” (115mm)T20S5 SUPER TURBO DIAMOND BLADE 5” (125mm)T20S9 SUPER TURBO DIAMOND BLADE 9” (225mm)

PRODUCT CODE DESCRIPTION DISCOUNT QTY.MASONRY CUTTING

SCW300 CUT-OFF WHEEL MASONRY 100x2.5x16mm 25

SCW320 CUT-OFF WHEEL MASONRY 125x2.5x22mm 25SCW410 CUT-OFF WHEEL MASONRY 230x2.5x22mm 25


METAL CUTTINGMCW35 CUT-OFF WHEEL METAL 100x2.5x16mm 25

MCW165 CUT-OFF WHEEL METAL 230x2.5x22mm 25MCW175 CUT-OFF WHEEL METAL 230x2.5x25mm 25MCW255 CUT-OFF WHEEL METAL 355x3.8x25mm 25MCW25 CUT-OFF WHEEL METAL 100x1.0x16mm THIN 25MCW60 CUT-OFF WHEEL METAL 125X2.5X22mm 25MCW65 CUT-OFF WHEEL METAL 125X1X22mm THIN 25

METAL GRINDINGMGW1030 GRINDING WHEEL METAL 100x6x16mm 25

GENERAL TOOLS 6

Other sizes available on request (min qty applies)

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.3 ABRASIVE DISCS - CUT OFF WHEELS

9.4 BLADES - DIAMOND T20S - Turbo Super - Wet or Dry

High performance wet or dry cutting of marble, clay bricks, terracotta, ceramic tiles, fibrous cement sheets, terrazzo. (Not suitable for abrasive materials such as blocks/concrete pavers.)

4TR1000 - Tile Turbo - Wet or Dry

A thinner style turbo designed for sharp cleaning of tough ceramic tiles. (Not suitable for abrasive materials such as concrete block/concrete pavers etc.) The T20T blade is also a very good handyman blade for general purpose use.

PRODUCT CODE DESCRIPTIONT20S4 SUPER TURBO DIAMOND BLADE 4” (100mm)

4TR1000 TILE TURBO DIAMOND BLADE 4” (100mm)

T20S45 SUPER TURBO DIAMOND BLADE 4 ½” (115mm)T20S5 SUPER TURBO DIAMOND BLADE 5” (125mm)T20S9 SUPER TURBO DIAMOND BLADE 9” (225mm)

PRODUCT CODE DESCRIPTION DISCOUNT QTY.MASONRY CUTTING

SCW300 CUT-OFF WHEEL MASONRY 100x2.5x16mm 25



METAL CUTTINGMCW35 CUT-OFF WHEEL METAL 100x2.5x16mm 25

MCW165 CUT-OFF WHEEL METAL 230x2.5x22mm 25MCW175 CUT-OFF WHEEL METAL 230x2.5x25mm 25MCW255 CUT-OFF WHEEL METAL 355x3.8x25mm 25MCW25 CUT-OFF WHEEL METAL 100x1.0x16mm THIN 25MCW60 CUT-OFF WHEEL METAL 125X2.5X22mm 25MCW65 CUT-OFF WHEEL METAL 125X1X22mm THIN 25

METAL GRINDINGMGW1030 GRINDING WHEEL METAL 100x6x16mm 25

GENERAL TOOLS 6

Other sizes available on request (min qty applies)

PLUMBOSSAUSTRALIA

9.5 HAND SAWS

7 GE

NERA

L TOO

LSAU

STRA

LIA’S

TRU

STED

PLU

MBIN

GTO

OL B

RAND

PLASTIC PIPE SAWS - REED

Tooth design, tooth set and hardness simplify cuts on ABS and PVC pipe. Die cast design of handle makes blade change fast and easy. Blades allow simultaneous cutting forward and backward producing a 50% productivity improvement.

XPERT HANDSAWS — JACK

Non-slip comfortable grip handle �

Premium 0.85mm thick steel for �

better stability while cutting 45° mitre and 90° square built into handle �

Hard point razor sharp teeth cut 40% faster �

than traditional saws. Stays sharper longer and cuts both across and with grain.

XP2001500 8 point universal hard point Saw 20” (500mm)

XP2049325 Veneer Saw 13 point, cross-cut toothing 13” (325mm) Extra fine hard point teeth for precision cuts make it suitable for cutting delicate material like thin plywood and PVC. Round nose with cutting teeth enables cut to start in middle of sheet.

TOOL BOX SAW — JACK

PL2001350 8 point universal toothing 14” (350mm) Ground teeth �


45˚ and 90˚ angles �


Hard point �

NOTE: Hard point teeth are harder than a file and will last 68 times longer than non-hardened. Hard point cannot be resharpened.

HANDSAW - BAHCO

309 - LENGTH: 20” (500mm) TEETH/POINTS: 8/10 Super cut bevel ground teeth �

Special blade shape for extra rigidity and depth � for a very fine cut

DRY WALL SAW

6” Hard point �

Moulded handle �

MASONRY SAW

Tungsten carbide teeth �

Suitable for limestone and hebel block�

Made in Germany�

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.5 HAND SAWSCONT

9.6 HACKSAWS


PPS18B BLADE FOR PPS18 SAW REED

XP2001500 XPERT HAND SAW 20” (500mm) JACK XP2049325 XPERT VENEER SAW 13” (325mm) JACKPL2001350 TOOL BOX SAW 14” (350mm) JACK

309 HAND SAW 20” (500mm) BAHCODWS150 DRY WALL SAW 6” (150mm)A-133034 AC MASONRY SAW

ECLIPSE BIMETAL HIGH SPEED STEEL BLADES

High performance�

Shatterproof blade �

PRODUCT CODE DESCRIPTION DISCOUNT QTY.JH01 JUNIOR HACKSAW N/A

JHB10 JUNIOR HACKSAW BLADES (10 PK) N/ASFH01 SQUARE FRAME HACKSAW ECLIPSE N/A

SFHQR SQUARE FRAME QUICK RELEASE HACKSAW N/AHBBM18 HACKSAW BLADE BIMETAL 18tpi ECLIPSE 100HBBM24 HACKSAW BLADE BIMETAL 24tpi ECLIPSE 100HBBM32 HACKSAW BLADE BIMETAL 32tpi ECLIPSE 100

JUNIOR HACKSAW

SQUARE FRAME HACKSAW

QUICK RELEASE HACKSAW

GENERAL TOOLS 8

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.5 HAND SAWSCONT

9.6 HACKSAWS


PPS18B BLADE FOR PPS18 SAW REED

XP2001500 XPERT HAND SAW 20” (500mm) JACK XP2049325 XPERT VENEER SAW 13” (325mm) JACKPL2001350 TOOL BOX SAW 14” (350mm) JACK

309 HAND SAW 20” (500mm) BAHCODWS150 DRY WALL SAW 6” (150mm)A-133034 AC MASONRY SAW

ECLIPSE BIMETAL HIGH SPEED STEEL BLADES

High performance�

Shatterproof blade �

PRODUCT CODE DESCRIPTION DISCOUNT QTY.JH01 JUNIOR HACKSAW N/A

JHB10 JUNIOR HACKSAW BLADES (10 PK) N/ASFH01 SQUARE FRAME HACKSAW ECLIPSE N/A

SFHQR SQUARE FRAME QUICK RELEASE HACKSAW N/AHBBM18 HACKSAW BLADE BIMETAL 18tpi ECLIPSE 100HBBM24 HACKSAW BLADE BIMETAL 24tpi ECLIPSE 100HBBM32 HACKSAW BLADE BIMETAL 32tpi ECLIPSE 100

JUNIOR HACKSAW

SQUARE FRAME HACKSAW

QUICK RELEASE HACKSAW

GENERAL TOOLS 8

PLUMBOSSAUSTRALIA

9.7 THREADED ROD CUTTERS

9.8 BOLT CUTTERS 9

GENE

RAL T

OOLS

THE

TUBE

& P

IPE

TOOL

SPE

CIAL

ISTS

Threaded rod cutters allow you to cut threaded rod without damaging the thread ridge on the cut side.This of course saves time used on tedious work.The blades, jaws and body are made of alloy steel and are completely heat treated in order to assure sharpness of the blades and long durability of the tool.

Other brands available

High tensile drop forged steel jaws for �

durability under extreme conditionsTwo-stage heat treated and ground jaws �

for extended cutting and resilienceCam adjustments for quick jaw alignment�

Centre cut for general purpose use�

Optimum performance for �

cutting high tensile material

PRODUCT CODE DESCRIPTIONNKM10 10mm THREADED ROD CUTTERNKM12 12mm THREADED ROD CUTTER

M6D 6mm DIE TO SUIT NKM10M8D 8mm DIE TO SUIT NKM10M10D 10mm DIE TO SUIT NKM10

M12D 12mm DIE TO SUIT NKM12

PRODUCT CODE DESCRIPTIONEBC24 BOLT CUTTER 24” (600mm) EBC36 BOLT CUTTER 36” (900mm)

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.9 NIPPLE CUTTER

PRODUCT CODE DESCRIPTIONTTNCO1 TRIM-A-THREAD NIPPLE CUTTER

TTNCO1B TRIM-A-THREAD NIPPLE CUTTER BLADE

Trim-a-Thread Nipple Cutter is a drill attachment used for trimming back excess 1/2” brass all-thread combinations. The tool is designed to shave the excess thread to desired length. The blade also chamfers the inside and outside of all-thread for ease of assembly with spout.

9.10 DRILL BITS

SPEEDBORE MAX

Full length heat treated body is �

stronger and lasts longerTapered flute for less binding and ease of use�

Cutting spurs for clean holes �

with minimal “break out”Full screw tip for ease of use and pull through�

“Tri-flute” design for faster chip ejection�

6mm hex shank prevents bit from slipping in chuck�

SBMS/6 – 6PCE SET Contains: 16, 18, 20, 22, 25 and 32mm Bits in pro-case

SBMS/3 – 3PCE SET Contains: 16, 20 and 25mm Bits

PRODUCT CODE DESCRIPTIONSBMS/6 6PCE SET 16, 18, 20, 22, 25 and 32mm IN PROCASESBMS/3 3PCE SET 16, 20 and 25mm

SBM16 SPEEDBORE MAX 16mm






GENERAL TOOLS 10

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.9 NIPPLE CUTTER

PRODUCT CODE DESCRIPTIONTTNCO1 TRIM-A-THREAD NIPPLE CUTTER

TTNCO1B TRIM-A-THREAD NIPPLE CUTTER BLADE

Trim-a-Thread Nipple Cutter is a drill attachment used for trimming back excess 1/2” brass all-thread combinations. The tool is designed to shave the excess thread to desired length. The blade also chamfers the inside and outside of all-thread for ease of assembly with spout.

9.10 DRILL BITS

SPEEDBORE MAX

Full length heat treated body is �

stronger and lasts longerTapered flute for less binding and ease of use�

Cutting spurs for clean holes �

with minimal “break out”Full screw tip for ease of use and pull through�

“Tri-flute” design for faster chip ejection�

6mm hex shank prevents bit from slipping in chuck�

SBMS/6 – 6PCE SET Contains: 16, 18, 20, 22, 25 and 32mm Bits in pro-case

SBMS/3 – 3PCE SET Contains: 16, 20 and 25mm Bits

PRODUCT CODE DESCRIPTIONSBMS/6 6PCE SET 16, 18, 20, 22, 25 and 32mm IN PROCASESBMS/3 3PCE SET 16, 20 and 25mm







GENERAL TOOLS 10

PLUMBOSSAUSTRALIA

9.10 DRILL BITSCONT

11GE

NERA

L TOO

LSIM

PORT

ERS

& MA

NUFA

CTUR

ERS

OF P

LUMB

ING

EQUI

PMEN

T

MASONRY DRILL BITS

Carbide tipped masonry drill suitable for rotary and impact drilling. Alpha masonry drill bits are supplied in Industrial hang packs.

More sizes available

PRODUCT CODE DESCRIPTIONMA030070G 3.0 x 70mm MASONRY DRILL BITMA040075 4 x 75mm MASONRY DRILL BIT

MA045065 4.5 x 65mm MASONRY DRILL BIT

MA050085 5 x 85mm MASONRY DRILL BITS

MA055085 5.5 x 85mm MASONRY DRILL BITS


MA065100 6.5 x 100mm MASONRY DRILL BITS






TURBO MAX

High Speed Steel 4 cutter auger �

bit with screw tip for effortless feedSpurs for cleaner faster cutting�

Designed for faster chip ejection�

4x faster than standard spade bits�

PRODUCTCODE

OVERALLLENGTH

FL. SHANKDIA.

DESCRIPTION

TS4C-10 165mm 55mm 1/4 4 CUTTER AUGER BIT WITH SCREW TIP 10 mmTS4C-13 165mm 55mm 1/4 4 CUTTER AUGER BIT WITH SCREW TIP 13mm

TS4C-16 165mm 70mm 1/4 4 CUTTER AUGER BIT WITH SCREW TIP 16mm





TS4C-SET3 n/a n/a n/a 3 pce Turbomax Auger Bit Set 16, 19, 25mm

TS4C-SET5 n/a n/a n/a 5 pce Turbomax Auger Bit Set 16, 19, 22, 25, 32mm

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.10 DRILL BITSCONT

GENERAL TOOLS 12

TURBO-BORE SPADE BITS - ALPHA

Quick release style ¼” shank�

Drills 40% faster than other spade bits!�

Available from 6mm – 40mm�

Attractive hang pack for display�

PRODUCT CODE DESCRIPTIONASB06 ALPHA GOLD SERIES SPADE BIT 6mmASB08 ALPHA GOLD SERIES SPADE BIT 8mm

ASB10 ALPHA GOLD SERIES SPADE BIT 10mm



















EXTENSIONSMBHQR65 65mm QUICK RELEASE EXTENSION

MBHQR150 150mm QUICK RELEASE EXTENSION

MBHC300 300mm EXTENSION – WITH ‘C’ RING

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.10 DRILL BITSCONT

GENERAL TOOLS 12

TURBO-BORE SPADE BITS - ALPHA

Quick release style ¼” shank�

Drills 40% faster than other spade bits!�

Available from 6mm – 40mm�

Attractive hang pack for display�

PRODUCT CODE DESCRIPTIONASB06 ALPHA GOLD SERIES SPADE BIT 6mmASB08 ALPHA GOLD SERIES SPADE BIT 8mm




















EXTENSIONSMBHQR65 65mm QUICK RELEASE EXTENSION

MBHQR150 150mm QUICK RELEASE EXTENSION

MBHC300 300mm EXTENSION – WITH ‘C’ RING

PLUMBOSSAUSTRALIA

9.10 DRILL BITSCONT

13

GENE

RAL T

OOLS

PLUM

BOSS

SUPP

LYPL

UMBI

NG,I

NDUS

TRIA

L,EL

ECTR

ICAL

& R

EFRI

GERA

TION

EQUI

PMEN

T


SDS PLUS MASONRY DRILL BITS

Aggressive chisel shaped masonry point for easy �

precision starting, centering and spot drilling

Patented, high volume, core reinforced �

multi flute drill to reduce vibration and transfermore impact energy to the drill bit head

Unique design flute channels the drilling dust�

from the hole, saving both time and money

Manufactured from Highest grade German �

steel which is not available in other countries

Brazing and hardening at 1100˚C which hardens�

the full drill body using special heat treatment procedures and a special surface finish to reduce

drill bit wear and improve resistance to bending forces

Unique brazing formula offers extremely tough �

soldered joints and guarantees the best performance

All drills carry the PGM-mark which �

guarantees that the drill bits meet the highest German standard for uniform anchor sizes

PRODUCT CODE DESCRIPTIONSP050110G 5 X 110mm SDS 4 PLUS MASONARY DRILLSP050160G 5 X 160mm SDS 4 PLUS MASONARY DRILL

SP055160G 5.5 X 160mm SDS 4 PLUS MASONARY DRILL

SP060110G 6 X 110mm SDS 4 PLUS MASONARY DRILL












Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


SDS-PLUS DRILL BIT

The SDS shank has the advantage of a simple spring-loaded chuck, so that bits can be chucked with a simple and quick hand action. Further, the shank and chuck are uniquely suited to hammer drilling in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shanks.Plumbers Kit

Electricians Kit

9.10 DRILL BITSCONT

SDS-MULTI MASONRY DRILL BITS

XR3 fitment suits SDS Plus and�

current Ramset R3® chucks

Self centering chisel head for �

excellent cutting performance

4+ Performance flute design for high�

strength & superior dust clearance

Manufactured in Germany�


PRODUCT CODE DESCRIPTIONSR050110G 5 X 110mm XR3 MULTI MASONARY DRILL BITSSR050160G 5 X 160mm XR3 MULTI MASONRY DRILL BITS

SR055160G 5.5 X 160mm XR3 MULTI MASONARY DRILL BITS

SR060110G 6 X 110mm XR3 MULTI MASONRY DRILL BITS


SR065110G 6.5 X 110mm XR3 MULTI MASONRY DRILL BITS






GENERAL TOOLS 14

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


SDS-PLUS DRILL BIT

The SDS shank has the advantage of a simple spring-loaded chuck, so that bits can be chucked with a simple and quick hand action. Further, the shank and chuck are uniquely suited to hammer drilling in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shanks.Plumbers Kit

Electricians Kit

9.10 DRILL BITSCONT

SDS-MULTI MASONRY DRILL BITS

XR3 fitment suits SDS Plus and�

current Ramset R3® chucks

Self centering chisel head for �

excellent cutting performance

4+ Performance flute design for high�

strength & superior dust clearance

Manufactured in Germany�


PRODUCT CODE DESCRIPTIONSR050110G 5 X 110mm XR3 MULTI MASONARY DRILL BITSSR050160G 5 X 160mm XR3 MULTI MASONRY DRILL BITS

SR055160G 5.5 X 160mm XR3 MULTI MASONARY DRILL BITS









GENERAL TOOLS 14

PLUMBOSSAUSTRALIA

9.10 DRILL BITSCONT

15

GENE

RAL T

OOLS

SERV

ING

AUST

RALI

A’STR

ADES

MEN

SINC

E 19

86

PRODUCT CODE DESCRIPTIONSDP5-160 SDS-Plus Drill 5mm x 160mmSDP5.5-110 SDS-Plus Drill 5.5mm x 110mm

SDP5.5-160 SDS-Plus Drill 5.5mm x 160mm

SDP6-160 SDS-Plus Drill 6mm x 160mm

SDP6.5-160 SDS-Plus Drill 6.5mm x 160mm























SDPROLLE SDS-Plus Drill Roll Kit Electricians

SDPROLLP SDS-Plus Drill Roll Kit Plumbing

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.10 DRILL BITSCONT

Ti NITE COATED JOBBER DRILL BITS

ALPHA

Superior M2HSS material, the �

ideal drill raw material.

Split point penetrates on contact �

and prevents wandering

Titanium Nitride coating hardens �

surface, extending the life of the drill

135˚ point angle cuts faster�

than standard 118˚ angle

29 PCE JOBBER DRILL SET – ALPHAContains: 1/16” – 1/2” Jobber drill bits Strong and rugged grey metal case

PRODUCT CODE DESCRIPTION BOX QTY.METRIC JOBBER DRILL BITS

C9LM030 JOBBER DRILL BIT 3mm ALPHA 10

C9LM040 JOBBER DRILL BIT 4mm ALPHA 10C9LM050 JOBBER DRILL BIT 5mm ALPHA 10C9LM055 JOBBER DRILL BIT 5.5mm ALPHA 5C9LM060 JOBBER DRILL BIT 6mm ALPHA 5C9LM070 JOBBER DRILL BIT 7mm ALPHA 5C9LM080 JOBBER DRILL BIT 8mm ALPHA 5C9LM090 JOBBER DRILL BIT 9mm ALPHA 5C9LM100 JOBBER DRILL BIT 10mm ALPHA 5C9LM110 JOBBER DRILL BIT 11mm ALPHA 5

C9LM120 JOBBER DRILL BIT 12mm ALPHA 5C9LM130 JOBBER DRILL BIT 13mm ALPHA 5

MORE SIZES AVAILABLEDRILL BIT SET

SI29 29PCE JOBBER DRILL SET ALPHA

PANEL DRILL BITS9D30SB DOUBLE ENDED DRILL BIT 1/8” MIN BUY 10

9S30SB SINGLE ENDED DRILL BIT 1/8” MIN BUY 10

GENERAL TOOLS 16

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.10 DRILL BITSCONT

Ti NITE COATED JOBBER DRILL BITS

ALPHA

Superior M2HSS material, the �

ideal drill raw material.

Split point penetrates on contact �

and prevents wandering

Titanium Nitride coating hardens �

surface, extending the life of the drill

135˚ point angle cuts faster�

than standard 118˚ angle

29 PCE JOBBER DRILL SET – ALPHAContains: 1/16” – 1/2” Jobber drill bits Strong and rugged grey metal case

PRODUCT CODE DESCRIPTION BOX QTY.METRIC JOBBER DRILL BITS

C9LM030 JOBBER DRILL BIT 3mm ALPHA 10

C9LM040 JOBBER DRILL BIT 4mm ALPHA 10C9LM050 JOBBER DRILL BIT 5mm ALPHA 10C9LM055 JOBBER DRILL BIT 5.5mm ALPHA 5C9LM060 JOBBER DRILL BIT 6mm ALPHA 5C9LM070 JOBBER DRILL BIT 7mm ALPHA 5C9LM080 JOBBER DRILL BIT 8mm ALPHA 5C9LM090 JOBBER DRILL BIT 9mm ALPHA 5C9LM100 JOBBER DRILL BIT 10mm ALPHA 5C9LM110 JOBBER DRILL BIT 11mm ALPHA 5

C9LM120 JOBBER DRILL BIT 12mm ALPHA 5C9LM130 JOBBER DRILL BIT 13mm ALPHA 5

MORE SIZES AVAILABLEDRILL BIT SET

SI29 29PCE JOBBER DRILL SET ALPHA

PANEL DRILL BITS9D30SB DOUBLE ENDED DRILL BIT 1/8” MIN BUY 10

9S30SB SINGLE ENDED DRILL BIT 1/8” MIN BUY 10

GENERAL TOOLS 16

PLUMBOSSAUSTRALIA

9.10 DRILL BITSCONT

17

GENE

RAL T

OOLS

PLUM

BOSS

- AU

STRA

LIA’S

OW

NPL

UMBI

NGTO

OL S

PECI

ALIS

TS

STEP DRILLS

HSS Titanium Nitride Coated�

Self start points �

Automatically deburs holes �

Individual drills supplied in sealed plastic tube�

Three piece set supplied in robust metal case�

9STM4-12Hole Sizes: 9 STEPS 4mm -12mm diameter

9STM4-20Hole Sizes: 9 STEPS4mm – 20mm diameter

9STM6-30Hole Sizes: 13 STEPS 6mm to 30mm diameter

9STI14-34Hole Sizes: 9 STEPS ¼” to ¾” diameter

STPSET3Hole Sizes: 3 PIECE SET4mm - 12mm; 4mm – 20mm; 6mm – 30mm diameter

9STM4-12

9STM4-20

9STM6-30

9STI14-34

STPSET3

PRODUCT CODE DESCRIPTION9STM4-12 STEP DRILL 9 STEPS 4mm – 12mm 9STM4-20 STEP DRILL 9 STEPS 4mm – 20mm

9STM6-30 STEP DRILL 13 STEPS 6mm - 30mm

9STI14-34 STEP DRILL 9 STEPS ¼” – ¾”

STPSET3 STEP DRILL 3 PIECE SET

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.10 DRILL BITSCONT

TILE DRILL BITS

ALPHA

Tungsten carbide tip�

Individual hang packs�

BOA BITS

Cuts all types of: Glass, Marble, Granite, �

Slate, Vitrified Ceramic and PorcelainFast Cutting�

Long Life�

Core Ejection�

Unique Welded Diamond Tip�

Bonus Drill Guide and Water Cooling System�

PRODUCT CODE DESCRIPTIONTD5 ALPHA TILE AND GLASS DRILL BIT 5mm

TD5.5 DYMAXION TILE AND GLASS DRILL BIT 5.5mm

TD6 ALPHA TILE AND GLASS DRILL BIT 6mm

TD6.5 ALPHA TILE AND DRILL BIT 6.5mm


9GTD050 5mm DIAMOND DRILL w/GUIDE AND COOLING SYSTEM









SGTD5-10 5,6,7,8, 10mm DIAMOND DRILL SET

SGTD10-25 10,12,15,20,25mm DIAMOND DRILL SET

DDISP01 3x(5,6,7,8,10mm) AND 2x(12,20,25mm) DIAMOND DRILL DISPLAY

DDISP02 3x(5,6,8,15mm) DIAMOND DRILL DISPLAY

GENERAL TOOLS 18

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.10 DRILL BITSCONT

TILE DRILL BITS

ALPHA

Tungsten carbide tip�

Individual hang packs�

BOA BITS

Cuts all types of: Glass, Marble, Granite, �

Slate, Vitrified Ceramic and PorcelainFast Cutting�

Long Life�

Core Ejection�

Unique Welded Diamond Tip�

Bonus Drill Guide and Water Cooling System�

PRODUCT CODE DESCRIPTIONTD5 ALPHA TILE AND GLASS DRILL BIT 5mm

TD5.5 DYMAXION TILE AND GLASS DRILL BIT 5.5mm


TD6.5 ALPHA TILE AND DRILL BIT 6.5mm











SGTD5-10 5,6,7,8, 10mm DIAMOND DRILL SET

SGTD10-25 10,12,15,20,25mm DIAMOND DRILL SET

DDISP01 3x(5,6,7,8,10mm) AND 2x(12,20,25mm) DIAMOND DRILL DISPLAY

DDISP02 3x(5,6,8,15mm) DIAMOND DRILL DISPLAY

GENERAL TOOLS 18

PLUMBOSSAUSTRALIA

Auto Load Knife Display comes complete with:12 x Auto Load Knives20 x Packs of 10 Blades5 x packs of 100 Blades1 x Presentation Box

9.11 KNIVES

19

GENE

RAL T

OOLS

AUST

RALI

A’STR

USTE

DPL

UMBI

NGTO

OL B

RAND

PRODUCT CODE DESCRIPTION BOX QTY.PB112-1 AUTO LOAD KNIFE COMPLETE W/ 5 BLADES 1

PB112-6 AUTO LOAD KNIFE COMPLETE W/ 5 BLADES 6PB112/DIS AUTO LOAD KNIFE DISPLAY N/A

921-2D AUTOLOAD KNIFE BLADES 100921-4D AUTOLOAD KNIFE BLADES 10PBHK HACKING KNIFE FOOTPRINT 1TK01 RETRACTABLE TRIMMING KNIFE 36

TKB05 TRIMMING KNIFE BLADES (5 PK) N/AIK01 WIDE BLADE INSULATION KNIFE 48

IKB05 SNAP-OFF BLADES FOR INSULATION KNIFE 5

Auto Load Knife Display

Retractable Knife Display (Box of 36)

Hacking Knife Insulation Knife

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


Comes with: 2 x Phillips® 2 x Slotted 2 x Nut Setter Bits

31PCE Screwdriver Set 18 x Bit Drives 1 x Bit Driver 8 x Slotted 4 x Phillips®

6018 Nut Setter Bits fits most Hose Clamps

6018 Screwdriver Display Complete with 12 Screwdrivers

Fully insulated to meet VDE standard �1000V Rating�Material: Chrome-Molybdenum Steel, �Magnetic Tip and Corrosion Free Blade

13PCE Screwdriver Set Slotted, Phillips® and Electrical Blade ESS13 has 6 Precision Screwdrivers

9.12 SCREWDRIVERS

PRODUCT CODE DESCRIPTION6018 SCREWDRIVER - 4 TIPS WHEELER / 6 in 16019 6018 SCREWDRIVER 12 PIECE DISPLAY

CS13 SCREWDRIVER SET - 13 PIECE CRESCENT

CS31 SCREWDRIVER SET – 31 PIECE CRESENT

ESS13 SCREWDRIVER SET 13 PIECE

EM8 8 PCE INSULATED TO 1000 VOLT SCREWDRIVER SET

GENERAL TOOLS 20

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


Comes with: 2 x Phillips® 2 x Slotted 2 x Nut Setter Bits

31PCE Screwdriver Set 18 x Bit Drives 1 x Bit Driver 8 x Slotted 4 x Phillips®

6018 Nut Setter Bits fits most Hose Clamps

6018 Screwdriver Display Complete with 12 Screwdrivers

Fully insulated to meet VDE standard �1000V Rating�Material: Chrome-Molybdenum Steel, �Magnetic Tip and Corrosion Free Blade

13PCE Screwdriver Set Slotted, Phillips® and Electrical Blade ESS13 has 6 Precision Screwdrivers

9.12 SCREWDRIVERS

PRODUCT CODE DESCRIPTION6018 SCREWDRIVER - 4 TIPS WHEELER / 6 in 16019 6018 SCREWDRIVER 12 PIECE DISPLAY

CS13 SCREWDRIVER SET - 13 PIECE CRESCENT

CS31 SCREWDRIVER SET – 31 PIECE CRESENT

ESS13 SCREWDRIVER SET 13 PIECE

EM8 8 PCE INSULATED TO 1000 VOLT SCREWDRIVER SET

GENERAL TOOLS 20

PLUMBOSSAUSTRALIA

21

GENE

RAL T

OOLS

THE

TUBE

& P

IPE

TOOL

SPE

CIAL

ISTS

9.13 SCREWDRIVER BITS

ALPHA DISPLAY

Contains:10x NS3865 10x NS384210x NS51665 10x NS5164210x PH245D 5x MBHC7510x PH265D 10x PH225S10x PH275D 10x PH250S10x PH275S 10x PH2150S

Alpha Display

Magnetic Bit Holder

Nutsetter Bit

Slotted Bit

No.2 Phillips Bit

Pozidrive Bit

Double Ended Phillips Bit

Hexagonal Insert Bit

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



PRODUCT CODE DESCRIPTION BOX QTY.PH125S NO.1 PHILLIPS BIT-25mm 10

PH225S NO.2 PHILLIPS BIT-25mm 10PZ225S NO.2 POZIDRIVE-25mm 10

PH325S NO.3 PHILLIPS BIT-25mm 10PH150S NO.1 PHILLIPS BIT-50mm 10PH250S NO.2 PHILLIPS BIT - 50mm 10PH275S NO.2 PHILLIPS BIT-75mm 10

PH2100S NO.2 PHILLIPS BIT-100mm 10PH2150S NO.2 PHILLIPS BIT-150mm 10PZ250S NO.2 POZIDRIVE BIT-50mm 10

SL525S NO. 5 SLOTTED BIT-25mm 10

SL625S NO.6 SLOTTED BIT-25mm 10

PH245D DOUBLE ENDED PHILLIPS BIT-45mm 10



NS1/442 1/4 NUTSETTER BIT - 42mm 10






MBHC54 MAGNETIC BIT HOLDER-54mm 10


HEX530S 5mm x 30mm HEXAGONAL INSERT BIT 10


ALPHDISP ALPHA DISPLAY 1

GENERAL TOOLS 22

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



PRODUCT CODE DESCRIPTION BOX QTY.PH125S NO.1 PHILLIPS BIT-25mm 10

PH225S NO.2 PHILLIPS BIT-25mm 10PZ225S NO.2 POZIDRIVE-25mm 10

PH325S NO.3 PHILLIPS BIT-25mm 10PH150S NO.1 PHILLIPS BIT-50mm 10PH250S NO.2 PHILLIPS BIT - 50mm 10PH275S NO.2 PHILLIPS BIT-75mm 10PH2100S NO.2 PHILLIPS BIT-100mm 10PH2150S NO.2 PHILLIPS BIT-150mm 10PZ250S NO.2 POZIDRIVE BIT-50mm 10

SL525S NO. 5 SLOTTED BIT-25mm 10

SL625S NO.6 SLOTTED BIT-25mm 10














ALPHDISP ALPHA DISPLAY 1

GENERAL TOOLS 22

PLUMBOSSAUSTRALIA

9.14 KEY SETS - BONDHUS

23

GENE

RAL T

OOLS

IMPO

RTER

S &

MANU

FACT

URER

S OF

PLUM

BING

EQUI

PMEN

T

FOLD—UP SETS

12589 IMPERIAL 9 PIECE Contains: 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32”,1/4”

12587 METRIC 7 PIECE Contains: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm

L-KEY SETS WITH TOOL HOLDER

12137 IMPERIAL 13 PIECE Contains- .05.”, 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”

12199 METRIC 9 PIECE Contains: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm

BALL END SETS WITH TOOL HOLDER

10937 IMPERIAL 13 PIECE Contains: .050”, 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”

10999 METRIC 9 PIECE Contains: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm

PRODUCT CODE DESCRIPTION12589 HEX KEY FOLD-UP SET IMPERIAL 9 PIECE BONDHUS 12587 HEX KEY FOLD-UP SET METRIC 7 PIECE BONDHUS

12137 HEX KEY L-KEY SET IMPERIAL 13 PIECE BONDHUS

12199 HEX KEY L-KEY SET METRIC 9 PIECE BONDHUS

10937 HEX KEY BALL END SET IMPERIAL 13 PIECE BONDHUS

10999 HEX KEY BALL END SET METRIC 9 PIECE BONDHUS

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.15 SOCKET SETS

8PCE MIXER TAP SOCKET SETDescription: 8 Piece Metric Tube Spanner SetSpecifications: Sizes: 8-9mm, 10-11mm, 12-13mm, 14-15mm, 16-17mm, 18-19mm

Manufactured from high quality steel tubing �

Different socket size on each end �

Sets come with 6 tube spanners and two Tommy bars �

Comes with a vinyl storage pouch�

PLUMBOSS 44PCE DEEP SOCKET SETThis 44 Piece AF & Metric Socket Set (3/8” Square Drive) contains:7 A/F Std Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” 7 A/F Deep Sockets:3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” 12 Metric Std Sockets:8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. 12 Metric Deep Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. 6 Accessories: 1 Ratchet Handle 1 Universal Joint 2 Extensions, 50 & 150mm 2 Adaptors.

70 PIECE PROFESSIONAL TOOL SETThis 70 Piece SAE & Metric Socket Set (1/4” and 3/8” Drive) contains16 1/4” Drive – 6 Point Sockets:3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16”5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm16 3/8” Drive – 12 Point Sockets:3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16”10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm12 Combination Wrenches:3/8, 7/16, 1/2, 9/16, 5/8, 11/16”10mm, 12mm, 13mm, 14mm, 15mm, 17mm12 1” Driver Bits:Phillips®, slotted, Torx® and hex8 SAE Hex Keys with Holder6 Accessories:1 3” Extension – 1/4” Drive1 3” Extension – 3/8” Drive1 1/4” Drive – 72 Teeth Quick Release Ratchet1 3/8” Drive - 72 Teeth Quick Release Ratchet1 1/4” (Male) x 3/8” (Female) Adapter1 MAGNETIC Dura-Driver™

GENERAL TOOLS 24

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.15 SOCKET SETS

8PCE MIXER TAP SOCKET SETDescription: 8 Piece Metric Tube Spanner SetSpecifications: Sizes: 8-9mm, 10-11mm, 12-13mm, 14-15mm, 16-17mm, 18-19mm

Manufactured from high quality steel tubing �

Different socket size on each end �

Sets come with 6 tube spanners and two Tommy bars �

Comes with a vinyl storage pouch�

PLUMBOSS 44PCE DEEP SOCKET SETThis 44 Piece AF & Metric Socket Set (3/8” Square Drive) contains:7 A/F Std Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” 7 A/F Deep Sockets:3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4” 12 Metric Std Sockets:8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. 12 Metric Deep Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. 6 Accessories: 1 Ratchet Handle 1 Universal Joint 2 Extensions, 50 & 150mm 2 Adaptors.

70 PIECE PROFESSIONAL TOOL SETThis 70 Piece SAE & Metric Socket Set (1/4” and 3/8” Drive) contains16 1/4” Drive – 6 Point Sockets:3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16”5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm16 3/8” Drive – 12 Point Sockets:3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16”10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm12 Combination Wrenches:3/8, 7/16, 1/2, 9/16, 5/8, 11/16”10mm, 12mm, 13mm, 14mm, 15mm, 17mm12 1” Driver Bits:Phillips®, slotted, Torx® and hex8 SAE Hex Keys with Holder6 Accessories:1 3” Extension – 1/4” Drive1 3” Extension – 3/8” Drive1 1/4” Drive – 72 Teeth Quick Release Ratchet1 3/8” Drive - 72 Teeth Quick Release Ratchet1 1/4” (Male) x 3/8” (Female) Adapter1 MAGNETIC Dura-Driver™

GENERAL TOOLS 24

PLUMBOSSAUSTRALIA

9.16 PLIERS 25

GE

NERA

L TOO

LS

9.15 SOCKET SETS

PRODUCT CODE DESCRIPTIONMTS7 MIXER TAP SOCKET SET 7 PCE

PBSS4438 plumBOSS DEEP SOCKET SET 44PCECTK70SET 70PCE PROFESSIONAL TOOL SET

EC-SS45CB1/2 45PCE 1/2”sq DRIVE COMBINATION SOCKET SET

PRODUCT CODE DESCRIPTION3248 INSULATED WIRING PLIER 8½” (216mm)

ECP7 COMBINATION PLIER 7” (175mm)

ECP8 COMBINATION PLIER 8” (200mm)

LINESMAN’S PLIERInsulating to 1000 Volts�

Cross hatch serrated jaws provide �

better grip on all work.

Anvil and knife cutting edge is hand �

honed; induction hardened and tested cutting frayed hemp and piano wire.

PLUM

BOSS

SUPP

LYPL

UMBI

NG,I

NDUS

TRIA

L,EL

ECTR

ICAL

& R

EFRI

GERA

TION

EQUI

PMEN

T

45 PIECE 1/2” SQUARE DRIVE COMBINATION SOCKET SETThis 45 piece AF and Metric Socket Set (1/2” Square Drive) contains:18 Metric Sockets:10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 27mm, 30mm, 32mm18 A/F Sockets:3/8, 13/32, 7/16, 1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 25/32, 13/16, 7/8, 15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4”2 Spark Plug Sockets:16mm and 21mm7 Accessories:1 Sliding T-Bar 250mm1 Universal Joint1 Speed Handle 395mm3 Extension Bars 75mm, 125mm and 250mm1 Reversible 72 Tooth Ratchet Handle with 5˚ Fine Adjustment, Push Down Socket release and 30˚ Ergonomic designed Offset Handle.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.16 PLIERSCONT

PRODUCT CODE DESCRIPTION BOX QTY.7R-3 STRAIGHT JAW LOCKING PLIER 175mm 5

10R-3 STRAIGHT JAW LOCKING PLIER 250mm 57CR-3 CURVED JAW LOCKING PLIER 175mm 5

10CR-3 CURVED JAW LOCKING PLIER 250mm 54WR-3 CURVED JAW PLIER W/-WIRE CUTTER 100mm 55WR-3 CURVED JAW PLIER W/-WIRE CUTTER 125mm 57WR-3 CURVED JAW PLIER W/-WIRE CUTTER 175mm 5

10WR-3 CURVED JAW PLIER W/-WIRE CUTTER 250mm 54LN-3 LONG NOSE PLIER W/-WIRE CUTTER 100mm 56LN-3 LONG NOSE PLIER W/-WIRE CUTTER 150mm 5

9LN-3 LONG NOSE PLIER W/-WIRECUTTER 225mm 5

6R LOCKING C-CLAMP 150mm 5

9R LOCKING WELDING CLAMP 225mm 5



11SP LOCKING C-CLAMPS W/-SWIVEL PADS 275mm 5


20R LOCKING CHAIN CLAMP 225mm 1

8R SHEETMETAL FOLDING TOOL 1

80DB VISE GRIP SHADOW BOARD WITH STOCK 1

428GS VISE GRIP GIFT SET - 4 PLIERS 1

LOCKING PLIERS

A simple hand squeeze can put one ton �

of controlled pressure between the jaws. Lock to the work, leaving both hands free. �

Easy release trigger - just press �

and the jaws snap open. Micro-adjustment can be adjusted for pliers �

action or to lock on various sizes of material with just the right amount of pressure. Quality materials-Only the finest high�

grade alloy steels are used. It is designed to give years of trouble free service. Wire Cutter-Vice-Grip tools with wire �

cutter will handle up to a 6.5mm bolt.

80DB Shadow Board displays 14 of the most common Vice-Grip pliers.

428GS Gift Set - Handy Kit contains: (1 each) - 10CR 250mm Curved Jaw Pliers, 7R 175mm Straight Jaw Pliers, 6LN 150mm Long Nose Pliers with wire cutter and 5WR 125mm Curved Jaw Pliers with wire cutter.

GENERAL TOOLS 26

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.16 PLIERSCONT

PRODUCT CODE DESCRIPTION BOX QTY.7R-3 STRAIGHT JAW LOCKING PLIER 175mm 5

10R-3 STRAIGHT JAW LOCKING PLIER 250mm 57CR-3 CURVED JAW LOCKING PLIER 175mm 5

10CR-3 CURVED JAW LOCKING PLIER 250mm 54WR-3 CURVED JAW PLIER W/-WIRE CUTTER 100mm 55WR-3 CURVED JAW PLIER W/-WIRE CUTTER 125mm 57WR-3 CURVED JAW PLIER W/-WIRE CUTTER 175mm 5

10WR-3 CURVED JAW PLIER W/-WIRE CUTTER 250mm 54LN-3 LONG NOSE PLIER W/-WIRE CUTTER 100mm 56LN-3 LONG NOSE PLIER W/-WIRE CUTTER 150mm 5

9LN-3 LONG NOSE PLIER W/-WIRECUTTER 225mm 5


9R LOCKING WELDING CLAMP 225mm 5





20R LOCKING CHAIN CLAMP 225mm 1

8R SHEETMETAL FOLDING TOOL 1

80DB VISE GRIP SHADOW BOARD WITH STOCK 1

428GS VISE GRIP GIFT SET - 4 PLIERS 1

LOCKING PLIERS

A simple hand squeeze can put one ton �

of controlled pressure between the jaws. Lock to the work, leaving both hands free. �

Easy release trigger - just press �

and the jaws snap open. Micro-adjustment can be adjusted for pliers �

action or to lock on various sizes of material with just the right amount of pressure. Quality materials-Only the finest high�

grade alloy steels are used. It is designed to give years of trouble free service. Wire Cutter-Vice-Grip tools with wire �

cutter will handle up to a 6.5mm bolt.

80DB Shadow Board displays 14 of the most common Vice-Grip pliers.

428GS Gift Set - Handy Kit contains: (1 each) - 10CR 250mm Curved Jaw Pliers, 7R 175mm Straight Jaw Pliers, 6LN 150mm Long Nose Pliers with wire cutter and 5WR 125mm Curved Jaw Pliers with wire cutter.

GENERAL TOOLS 26

PLUMBOSSAUSTRALIA

9.16 PLIERSCONT

27

GENE

RAL T

OOLS

MULTIGRIP PLIERS

TONGUE AND GROOVE PLIERSMade in the USA from very �

special high carbon steel. UNDERCUT TONGUE AND GROOVE. �

Prevents slip regardless of pressure applied. Undercut is machined, not forged REINFORCING FLANGE. Reduces stress �

breakage and coupled with the excellent heat treatment, negates stress riser problems. PERMALOCK FASTENER. Channellock has not �

had one return due to product breakage since this fastener was patented in 1982. Strength of the tool has been tested to a tensile force of 3000lbs.

The PERMALOCK is a unique fixing devicethat assures optional ease of jaw adjustment and eliminates the possibility of side-to-side jaw wobble.

PRODUCT CODE DESCRIPTION317 LONG NOSE PLIER W/-SIDE CUTTER 190mm

ELNP6 LONG NOSE PLIER 6” (150mm)

ELNP7 LONG NOSE PLIER 7” (175mm)

LONG NOSE PLIERS

317 Pliers - made with the highest quality US carbon steel, to provide strength, hardness, toughness, flexibility and long life.

SERV

ING

AUST

RALI

A’S T

RADE

SMEN

SIN

CE 1

986

TEETH CONSTRUCTION. The teeth at the bottom are rounded. Sharp corners cause �

stress risers. Teeth are induction hardened (to high 50’s on the Rockwell “C” scale.) HANDLES. Special heat treatment gives a special spring that is necessary for longer life under �

stressful conditions. The blue plasticised handle is for comfort and does not provide dielectric properties.

Straight Jaw Tongue and Groove Pliers can be used in a multitude of applications such as automotive, plumbing, refrigeration and electrical work and are a very handy acquisition for any tool box.

Round Jaw - shape makes the most versatile pliers, preferred by plumbers and maintenance trades. Multi-grip Pliers are designed for heavy duty work with pipe and round objects.

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.16 PLIERSCONT

PRODUCT CODE DESCRIPTIONPGP10 POSITIVE GRIP PLIER 10” (250mm) REED

PGP12 POSITIVE GRIP PLIER 12” (300mm) REED



groove design only requires downward pressure, no squeezing, once pliers are engaged. Smooth tongue and groove action makes the most �

effective pliers on the market for one hand operation. Forged from high quality, high carbon �


SIDE CUTTING PLIERS

Anvil knife cutting edge �

Hand honed and induction hardened �

Tested cutting piano wire and hemp �

PRODUCT CODE DESCRIPTION BOX QTY.3238 CUTTING PLIER, LAP JOINT, CONTOUR HANDLE 8” 5

PB358 END CUTTER CRESCENT 5

END CUTTER

GENERAL TOOLS 28

PRODUCT CODE DESCRIPTION BOX QTY.STRAIGHT JAW

424 MULTIGRIP STRAIGHT JAW 4” (111mm) 5426 MULTIGRIP STRAIGHT JAW 6 ½” (165mm) 5

420 MULTIGRIP STRAIGHT JAW 9 ½” (241mm) 5430 MULTIGRIP STRAIGHT JAW 10” (254mm) 5440 MULTIGRIP STRAIGHT JAW 12” (305mm) 5460 MULTIGRIP STRAIGHT JAW 16” (406mm) 2480 MULTIGRIP STRAIGHT JAW 20¼” (508mm) 2

ROUND JAW422 MULTIGRIP ROUND JAW 9 1/2” (241mm) 5

442 MULTIGRIP ROUND JAW 12” (305mm) 5

END CUTTING PLIERS


Designed for powerful & heavy cutting�

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.16 PLIERSCONT

PRODUCT CODE DESCRIPTIONPGP10 POSITIVE GRIP PLIER 10” (250mm) REED

PGP12 POSITIVE GRIP PLIER 12” (300mm) REED



groove design only requires downward pressure, no squeezing, once pliers are engaged. Smooth tongue and groove action makes the most �

effective pliers on the market for one hand operation. Forged from high quality, high carbon �


SIDE CUTTING PLIERS

Anvil knife cutting edge �


Tested cutting piano wire and hemp �

PRODUCT CODE DESCRIPTION BOX QTY.3238 CUTTING PLIER, LAP JOINT, CONTOUR HANDLE 8” 5

PB358 END CUTTER CRESCENT 5

END CUTTER

GENERAL TOOLS 28

PRODUCT CODE DESCRIPTION BOX QTY.STRAIGHT JAW

424 MULTIGRIP STRAIGHT JAW 4” (111mm) 5426 MULTIGRIP STRAIGHT JAW 6 ½” (165mm) 5

420 MULTIGRIP STRAIGHT JAW 9 ½” (241mm) 5430 MULTIGRIP STRAIGHT JAW 10” (254mm) 5440 MULTIGRIP STRAIGHT JAW 12” (305mm) 5460 MULTIGRIP STRAIGHT JAW 16” (406mm) 2480 MULTIGRIP STRAIGHT JAW 20¼” (508mm) 2

ROUND JAW422 MULTIGRIP ROUND JAW 9 1/2” (241mm) 5

442 MULTIGRIP ROUND JAW 12” (305mm) 5

END CUTTING PLIERS


Designed for powerful & heavy cutting�

PLUMBOSSAUSTRALIA

PLUM

BOSS

- AU

STRA

LIA’S

OW

NPL

UMBI

NGTO

OL S

PECI

ALIS

TS

9.18 SQUARES & RULERS

29

GENE

RAL T

OOLS

PRODUCT CODE DESCRIPTION1110IM TRADESMAN SQUARE 16” x 24” 240IM COMBINATION SQUARE 12” (300mm)120M TRI & MITRE SQUARE EMPIRELFBSI 1m WHITE (bevelled) FOLDING RULER

SSR300 STAINLESS STEEL RULER 300MM (other sizes available)

9.17 BEVELS

PRODUCT CODE DESCRIPTIONBEVSL SLIDING BEVEL

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.20 MEASURING WHEEL

Trigger Brake �

Measure up to 10,000 meters in 100mm increments�

Non slip Timing Belt �

318mm diameter wheel runs on roller �

bearings and has tyre moulded into rim. Folds in half for easy storage�

Debris removing scraper �

PRODUCT CODE DESCRIPTIONROTO2000DL CONTRACTOR MEASURING WHEEL (2YR Guarantee)

GENERAL TOOLS 30

9.19 TAPE MEASURES

PRODUCT CODE DESCRIPTION BOX QTY.FLUORO TAPE MEASURES

F38SI FLUOROLOK TAPE MEASURE 8m x 19mm LUFKIN 12F48SI FLUOROLOK TAPE MEASURE 8m x 25mm LUFKIN 10XL41M TAPE MEASURE 10m x 25mm LUFKIN 2

STERLING TAPE MEASURESTBC5019 PROFESSIONAL TAPE MEASURE 5m x 19mm STERLING 24TBC8025 PROFESSIONAL TAPE MEASURE 8m x 25mm STERLING 18RAK8025 TOP STOP TAPE MEASURE 8m x 25mm STERLING 18TC1025 DOUBLE STOP TAPE MEASURE 10m x 25mm STERLING 18SB889 TAPE TECH 8m x 25mm 10

SB892-328M TAPE TECH 8m x 32mm 8

LARGER SIZE TAPE MEASURESFTC30 FIBREGLASS TAPE MEASURE CLOSED REEL 30m 1

FT030 FIBREGLASS TAPE MEASURE OPEN WINDER 30m 1

FT050 FIBREGLASS TAPE MEASURE OPEN WINDER 50m 1FT0100 FIBREGLASS TAPE MEASURE OPEN WINDER 100m 1

HYV30M STEEL BLADE HI-VIZ TAPE MEASURE 30m LUFKIN 1

7½% DISCOUNT FOR 30 ASSORTED LUFKIN TAPE MEASURESPLUMBOSS

AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.20 MEASURING WHEEL

Trigger Brake �

Measure up to 10,000 meters in 100mm increments�

Non slip Timing Belt �

318mm diameter wheel runs on roller �

bearings and has tyre moulded into rim. Folds in half for easy storage�

Debris removing scraper �

PRODUCT CODE DESCRIPTIONROTO2000DL CONTRACTOR MEASURING WHEEL (2YR Guarantee)

GENERAL TOOLS 30

9.19 TAPE MEASURES

PRODUCT CODE DESCRIPTION BOX QTY.FLUORO TAPE MEASURES

F38SI FLUOROLOK TAPE MEASURE 8m x 19mm LUFKIN 12F48SI FLUOROLOK TAPE MEASURE 8m x 25mm LUFKIN 10XL41M TAPE MEASURE 10m x 25mm LUFKIN 2

STERLING TAPE MEASURESTBC5019 PROFESSIONAL TAPE MEASURE 5m x 19mm STERLING 24TBC8025 PROFESSIONAL TAPE MEASURE 8m x 25mm STERLING 18RAK8025 TOP STOP TAPE MEASURE 8m x 25mm STERLING 18TC1025 DOUBLE STOP TAPE MEASURE 10m x 25mm STERLING 18SB889 TAPE TECH 8m x 25mm 10

SB892-328M TAPE TECH 8m x 32mm 8

LARGER SIZE TAPE MEASURESFTC30 FIBREGLASS TAPE MEASURE CLOSED REEL 30m 1

FT030 FIBREGLASS TAPE MEASURE OPEN WINDER 30m 1

FT050 FIBREGLASS TAPE MEASURE OPEN WINDER 50m 1FT0100 FIBREGLASS TAPE MEASURE OPEN WINDER 100m 1

HYV30M STEEL BLADE HI-VIZ TAPE MEASURE 30m LUFKIN 1

7½% DISCOUNT FOR 30 ASSORTED LUFKIN TAPE MEASURES

PLUMBOSSAUSTRALIA

31

GENE

RAL T

OOLS

9.22 SPOT MARKING PAINT

A hand held marking paint for inverted use. Fast and convenient, fitted with the original one piece “Trigger Cap”. The double action valve will enable you to obtain both wide and narrow marks as required for your application.

Colours Available: Yellow, White, Fluoro Red, Fluoro Green, Fluoro Yellow, Fluoro Orange and Fluoro Pink.

PRODUCT CODE DESCRIPTION BOX QTY.SMP350 SPOT-MARKING PAINT 350g 12 ASSORTED

9.21 LEVELS

SPIRIT LEVELS

Solid I-Beam Frame �

Replaceable acrylic vial �

Top reading window �

Precision ground edges assure accuracy �

Bevelled end plates protect from shock �

Three vial �

PRODUCT CODE DESCRIPTION580-24 ALUMINIUM LEVEL 24” (600mm) EMPIRE 580-36 ALUMINIUM LEVEL 36” (900mm) EMPIRE580-48 ALUMINIUM LEVEL 48” (1200mm) EMPIRE

83-3 LINE LEVEL EMPIREL60V120Y LUFKIN SPIRIT LEVEL 1200mm WITH CARRY CASE

TORPEDO LEVELS

Strong accurate 9” (225mm) frame �

Vials read plumb, level and 45˚ �

Solid frame �

Magnetic base �

LV9PM vial indicates pitch�

PRODUCT CODE DESCRIPTION581-9 TORPEDO LEVEL ALUMINIUM FRAME 9” (225mm) EMPIRE

LV9PM TORPEDO LEVEL DIE CAST ALUMINIUM 9” (225mm) REED AU

STRA

LIA’S

TRUS

TED

PLUM

BING

TOOL

BRA

ND

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.24 STRING LINES

9.25 PLUMB BOB

PRODUCT CODE DESCRIPTION BOX QTY.SL50W STRING LINE 50m WHITE 10SL100W STRING LINE 100m WHITE 10SL50F STRING LINE 50m FLUORO 10SL100F STRING LINE 100m FLUORO 10

PRODUCT CODE DESCRIPTIONPLB01 PLUMB BOB

GENERAL TOOLS 32

9.23 CHALK LINES & REPLACEMENTS

PRODUCT CODE DESCRIPTION BOX QTY.64499 REEL AND CHALK SET – 30m and 4oz (113g) BLUE 364110 CHALK LINE REEL (30m) 664310 PLASTIC CHALK LINE (30m) 664610 REPLACEMENT CHALK LINE (30m) 664801 CHALK BLUE 4oz (113g) 664901 CHALK BLUE 8oz (226g) 664802 CHALK RED 4oz (113g) 664902 CHALK RED 8oz (226g) 6

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.24 STRING LINES

9.25 PLUMB BOB

PRODUCT CODE DESCRIPTION BOX QTY.SL50W STRING LINE 50m WHITE 10SL100W STRING LINE 100m WHITE 10SL50F STRING LINE 50m FLUORO 10SL100F STRING LINE 100m FLUORO 10

PRODUCT CODE DESCRIPTIONPLB01 PLUMB BOB

GENERAL TOOLS 32

9.23 CHALK LINES & REPLACEMENTS

PRODUCT CODE DESCRIPTION BOX QTY.64499 REEL AND CHALK SET – 30m and 4oz (113g) BLUE 364110 CHALK LINE REEL (30m) 664310 PLASTIC CHALK LINE (30m) 664610 REPLACEMENT CHALK LINE (30m) 664801 CHALK BLUE 4oz (113g) 664901 CHALK BLUE 8oz (226g) 664802 CHALK RED 4oz (113g) 664902 CHALK RED 8oz (226g) 6

PLUMBOSSAUSTRALIA

33

GENE

RAL T

OOLS

9.26 PENCILS & CRAYONS

9.27 DOUBLE ENDED SCRIBER

9.28 TAP PULLER

Carpenters Pencils - Box of 72Crayons - Box of 12 Colours Available: Red, Yellow, White or Blue

PRODUCT CODE DESCRIPTION BOX QTY.PCR01 MEDIUM CARPENTER’S PENCIL BROKEN PACK

PCR01C MEDIUM CARPENTER’S PENCIL 72CR02 CRAYON BROKEN PACK

CR02C CRAYON 12

PRODUCT CODE DESCRIPTIONDES01 DOUBLE ENDED SCRIBER

PRODUCT CODE DESCRIPTION2ATP TAP PULLER

THE

TUBE

& P

IPE

TOOL

SPE

CIAL

ISTS

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.29 TAP RESEATERS

PRODUCT CODE DESCRIPTIONSS150 SWIFT SEATER 1/2” plumBOSS TRS2 TAP RESEATER 1/2” & 3/4” STRAIGHTTRT2 TAP RESEATER 1/2” & 3/4” TAPERED

SWIFT SEATER - DRILL ATTACHMENT

PRECISION

These unique Swift Seaters have a precision ground stainless steel shaft fitting perfectly into a phosphorous bronze body. No lateral movement prevents out of square seating.

CLUTCH

When using the Swift Seater in 1/2” taps the bronze body is started in the tap body about half a turn. The shaft (connected to a drill) is withdrawn until the rubber cone on the shaft contacts with the Swift Seater body and screws it in. This also works in reverse, to remove the Swift Seater. This ensures ease of operation for regular checking of the seat, so excessive machining does not shorten the life of the tap body. Drill not included.

Swift Seater

Straight and Tapered Tap Reseater

GENERAL TOOLS 34

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.29 TAP RESEATERS

PRODUCT CODE DESCRIPTIONSS150 SWIFT SEATER 1/2” plumBOSS TRS2 TAP RESEATER 1/2” & 3/4” STRAIGHTTRT2 TAP RESEATER 1/2” & 3/4” TAPERED

SWIFT SEATER - DRILL ATTACHMENT

PRECISION

These unique Swift Seaters have a precision ground stainless steel shaft fitting perfectly into a phosphorous bronze body. No lateral movement prevents out of square seating.

CLUTCH

When using the Swift Seater in 1/2” taps the bronze body is started in the tap body about half a turn. The shaft (connected to a drill) is withdrawn until the rubber cone on the shaft contacts with the Swift Seater body and screws it in. This also works in reverse, to remove the Swift Seater. This ensures ease of operation for regular checking of the seat, so excessive machining does not shorten the life of the tap body. Drill not included.

Swift Seater

Straight and Tapered Tap Reseater

GENERAL TOOLS 34

PLUMBOSSAUSTRALIA

IMPO

RTER

S &

MANU

FACT

URER

S OF

PLUM

BING

EQUI

PMEN

T35

GE

NERA

L TOO

LS

9.30 RIVETERS

EG-2060 - Handy-man Riveter TT55D - Tucker Pop Riveter is a heavy duty plier type tool suitable for low volume production. It is ideal for fastening applications in the field. All steel parts are hardened and tempered for maximum life. It will set up to 32mm Nickel/Copper and 4mm steel.

REPLACEMENT PARTS:PO25266 – Fulcrum PinPO25268 – Fulcrum Pin R ClipPO25286 – Power Unit

PO25278 – Set of Two Jaws

OTHER REPLACEMENT PARTS ARE AVAILABLE FOR THE TT55D

PRODUCT CODE DESCRIPTION BOX QTY.EG-2060 HAND RIVETER ETC N/ATT55D TUCKER POP RIVETER 5 AND 10

PO25266 FULCRUM PIN N/APO25268 FULCRUM PIN R CLIP N/APO25286 POWER UNIT N/APO25278 SET OF TWO JAWS N/A

PO25266/PO25268 PO25286 PO25278

TT55D

EG - 2060

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.31 CAULKING GUNS

9.32 BRUSHES

PRO-GUN: Best Quality Available �

Hooked handle for hanging on ladder rung or gutter �

Made in the UK�

PRODUCT CODE DESCRIPTIONCGP1 PRO-GUN SVENIC CG1 SKELETON/CAULKING GUN

PRODUCT CODE DESCRIPTIONPB25 PAINT BRUSH 1” (25mm) PB50 PAINT BRUSH 2” (50mm)

PB100 PAINT BRUSH 4” (100mm)4WB WIRE BRUSH (FOUR ROW)

SPB12 SPIRIT BRUSHES

GENERAL TOOLS 36

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.31 CAULKING GUNS

9.32 BRUSHES

PRO-GUN: Best Quality Available �

Hooked handle for hanging on ladder rung or gutter �

Made in the UK�

PRODUCT CODE DESCRIPTIONCGP1 PRO-GUN SVENIC CG1 SKELETON/CAULKING GUN

PRODUCT CODE DESCRIPTIONPB25 PAINT BRUSH 1” (25mm) PB50 PAINT BRUSH 2” (50mm)

PB100 PAINT BRUSH 4” (100mm)4WB WIRE BRUSH (FOUR ROW)

SPB12 SPIRIT BRUSHES

GENERAL TOOLS 36

PLUMBOSSAUSTRALIA

37

GENE

RAL T

OOLS

9.33 RUBBER BUCKET

9.34 FILES

Excellent for and resists the effects of �

mixing mortar and concrete, acids, oils, salts, soaps, abrasive materials, fertilizers, animal feeds and strong detergents Heavy duty galvanised handle and fittings �

Strong reinforced �

Dry concrete easily removed due to flexibility �

Does not crush.. .bounces back into shape �

Robust, will carry heavy loads �

Does not rust, dent or crack �

Made to American standards�

BF10 - FLAT BASTARD FILE: For general work on iron, steel etc.

BF1/210 - HALF ROUND BASTARD FILE: For flat, concave and convex surfaces

WR1/210 - HALF ROUND WOOD RASP: For use on wood and soft metals

RTF10 - ROUND RAT TAIL FILE: For circular openings and concave surfaces

PRODUCT CODE DESCRIPTIONN12S RUBBER BUCKET 12L W/ SPOUT FORTEXN12 RUBBER BUCKET 12L FORTEX

PRODUCT CODE DESCRIPTION BOX QTY.BF10 FLAT BASTARD FILE 10” (250mm) 6

BF1/210 HALF ROUND BASTARD FILE 10” (250mm) 6WR1/210 HALF ROUND WOOD RASP 10” (250mm) 6

RTF10 RAT TAIL FILE 10” (250mm) 6

PLUM

BOSS

SUPP

LYPL

UMBI

NG,I

NDUS

TRIA

L,EL

ECTR

ICAL

& R

EFRI

GERA

TION

EQUI

PMEN

T

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.35 STRAPS

TIE DOWN STRAPSTie Down Straps are a quick and secure way to tie down your load. They come in assorted sizes from 1m up to 3.5m. They have a weight load of 350kg with metal clasp.

Tradesmen use these to suspend tube or pipe while strut system is installed.

CARGO STRAPSCargo straps are ideal for any application where you need strength and versatility. They are a heavy duty strap, made of vulcanised rubber, and have stainless steel hooks.

PRODUCT CODE DESCRIPTION BOX QTY.TDSDISP TIE DOWN STRAP DISPLAY BOX 8

TDS1 1M GREY TIE DOWN STRAP 8TDS1.5 1.5M GOLD TIE DOWN STRAP 8TDS2 2M GREEN TIE DOWN STRAP 8

TDS2.5 2.5M RED TIE DOWN STRAP 8TDS3.5 3.5M BLACK TIE DOWN STRAP 8

PRODUCT CODE DESCRIPTION BOX QTY.CRS15 RUBBER CARGO STRAP 15” 30CRS22 RUBBER CARGO STRAP 22” 30CRS31 RUBBER CARGO STRAP 31” 30

GENERAL TOOLS 38

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.35 STRAPS

TIE DOWN STRAPSTie Down Straps are a quick and secure way to tie down your load. They come in assorted sizes from 1m up to 3.5m. They have a weight load of 350kg with metal clasp.

Tradesmen use these to suspend tube or pipe while strut system is installed.

CARGO STRAPSCargo straps are ideal for any application where you need strength and versatility. They are a heavy duty strap, made of vulcanised rubber, and have stainless steel hooks.

PRODUCT CODE DESCRIPTION BOX QTY.TDSDISP TIE DOWN STRAP DISPLAY BOX 8

TDS1 1M GREY TIE DOWN STRAP 8TDS1.5 1.5M GOLD TIE DOWN STRAP 8TDS2 2M GREEN TIE DOWN STRAP 8

TDS2.5 2.5M RED TIE DOWN STRAP 8TDS3.5 3.5M BLACK TIE DOWN STRAP 8

PRODUCT CODE DESCRIPTION BOX QTY.CRS15 RUBBER CARGO STRAP 15” 30CRS22 RUBBER CARGO STRAP 22” 30CRS31 RUBBER CARGO STRAP 31” 30

GENERAL TOOLS 38

PLUMBOSSAUSTRALIA

39

GENE

RAL T

OOLS

9.36 MIRRORS

Two piece Telescoping Inspection and Magnet Set

50mm diameter glass mirror �

220mm long extends to 440mm �

PRODUCT CODE DESCRIPTIONTM440 TELESCOPIC MIRROR AND MAGNET SET

9.37 NAIL BAGS

REI-499-411 POCKET ECONOMY EXTRA CAPACITY PROFESSIONAL

SPLIT LEATHER CARPENTERS APRON

Made of heavy duty sueded split leather �

2 large flared main nail pockets, 2 medium�

sized nail pockets and 6 small tool pockets Leather hammer loops, one on each side �

Rivet reinforcement for double strength �

Fully adjustable 2” wide nylon web belt �

Leather tape holder �

REI-2262 POCKET NAIL BAG

Heavy Duty adjustable nylon belt�

Extra reinforced seams for durability�

Two large sized pockets�

PRODUCT CODE DESCRIPTIONREI-499-4 CARPENTER’S APRON 11 POCKET ROOSTER REI-226 NAIL BAG 2 POCKET ROOSTER

SERV

ING

AUST

RALI

A’S T

RADE

SMEN

SIN

CE 1

986

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.38 POWER LEADS AND LEAD HOOKS

15amp with 10amp plug

PRODUCT CODE DESCRIPTIONEL15 EXTENSION POWER LEAD 15mEL20 EXTENSION POWER LEAD 20mEL30 EXTENSION POWER LEAD 30m

ASLH001/3 LEAD HOOK (3 PK)

9.39 SAFETY GEAR

PRODUCT CODE DESCRIPTIONDMP50 DUST MASKS (50 PK)

EM2 EAR MUFFS (PAIR)EP2 EAR PLUGS (PAIR)

SG01 SAFETY GOGGLESSGA2 SAFETY GLASSESSHH01 HARD HATR-319 KNEE PADS (PAIR)

DNVXL DAY/NIGHT SAFETY VEST W/ SILVER TRIM (SIZE XL)DVXL DAY ONLY SAFETY VEST NO TRIM XL

REDAG45 RED ACID GLOVES 45CMES2M 2m EARTHING STRAP (OTHER SIZES AVAILABLE UPON REQUEST)

EARTHING STRAPS PROVIDE SAFETY PROVISION AGAINST ELECTROCUTION FROM ELECTRIC CURRENT IN EXISTING WATERLINES WHEN CUTTING

GENERAL TOOLS 40

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.38 POWER LEADS AND LEAD HOOKS

15amp with 10amp plug

PRODUCT CODE DESCRIPTIONEL15 EXTENSION POWER LEAD 15mEL20 EXTENSION POWER LEAD 20mEL30 EXTENSION POWER LEAD 30m

ASLH001/3 LEAD HOOK (3 PK)

9.39 SAFETY GEAR

PRODUCT CODE DESCRIPTIONDMP50 DUST MASKS (50 PK)

EM2 EAR MUFFS (PAIR)EP2 EAR PLUGS (PAIR)

SG01 SAFETY GOGGLESSGA2 SAFETY GLASSESSHH01 HARD HATR-319 KNEE PADS (PAIR)

DNVXL DAY/NIGHT SAFETY VEST W/ SILVER TRIM (SIZE XL)DVXL DAY ONLY SAFETY VEST NO TRIM XL

REDAG45 RED ACID GLOVES 45CMES2M 2m EARTHING STRAP (OTHER SIZES AVAILABLE UPON REQUEST)

EARTHING STRAPS PROVIDE SAFETY PROVISION AGAINST ELECTROCUTION FROM ELECTRIC CURRENT IN EXISTING WATERLINES WHEN CUTTING

GENERAL TOOLS 40

PLUMBOSSAUSTRALIA

41

GENE

RAL T

OOLS

9.40 BRICK BOLSTER

PRODUCT CODE DESCRIPTIONBRB01 BRICK BOLSTER

9.41 CHISELS

PRODUCT CODE DESCRIPTIONCC15012 COLD CHISEL 6” x 1/2” (150mm x 12.5mm) CC20020 COLD CHISEL 8” x 3/4” (200mm x 20mm)CC25025 COLD CHISEL 10” x 1” (250mm x 25mm)

COLD CHISELS

PRODUCT CODE DESCRIPTIONPGC PLUGGING CHISEL

PLUGGING CHISEL

PLUM

BOSS

- AU

STRA

LIA’S

OW

NPL

UMBI

NGTO

OL S

PECI

ALIS

TS

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


GENERAL TOOLS 42

9.41 CHISELSCONT

WOOD CHISELS

Europe’s most popular chisel. Features bevel edges. The slightly squared special polypropylene handle gives a good, comfortable grip on this hard wearing chisel for continuous use without fatigue. There is less danger of the chisel twisting and slipping during use.

PRODUCT CODE DESCRIPTION BOX QTY.M4441/2 WOOD CHISEL 1/2” (13mm) - MARPLES 6M4443/4 WOOD CHISEL 3/4” (19mm) - MARPLES 6M4441 WOOD CHISEL 1” (25mm) - MARPLES 6

M444S3 SET OF 3 WOOD CHISELS 1/2”,3/4”,1” - MARPLES 6

9.42 HAMMERS

PRODUCT CODE DESCRIPTIONFH20 CLAW HAMMER FIBERGLASS HANDLE 20ozLH3 LUMP HAMMER TIMBER HANDLE 3lb

LH3FG LUMP HAMMER FIBREGLASS HANDLE 3lb SH10 SLEDGE HAMMER FIBREGLASS HANDLE 10lb E20C ESTWING CLAW HAMMER 20oz LEATHER GRIP

E3-20C ESTWING CLAW HAMMER 20oz SHOCK REDUCTIONE3-28C-24 ESTWING CLAW HAMMER ENGLISH 24oz SHOCK REDUCTION

E-24C ESTWING CLAW HAMMER 24oz LEATHER HANDLE

E3-28SM ESTWING 28oz FRAMING HAMMERE-MRF20C ESTWING CLAW HAMMER SURE STRIKE 20oz FIBREGLASS HANDLE

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


GENERAL TOOLS 42

9.41 CHISELSCONT

WOOD CHISELS

Europe’s most popular chisel. Features bevel edges. The slightly squared special polypropylene handle gives a good, comfortable grip on this hard wearing chisel for continuous use without fatigue. There is less danger of the chisel twisting and slipping during use.

PRODUCT CODE DESCRIPTION BOX QTY.M4441/2 WOOD CHISEL 1/2” (13mm) - MARPLES 6M4443/4 WOOD CHISEL 3/4” (19mm) - MARPLES 6M4441 WOOD CHISEL 1” (25mm) - MARPLES 6

M444S3 SET OF 3 WOOD CHISELS 1/2”,3/4”,1” - MARPLES 6

9.42 HAMMERS

PRODUCT CODE DESCRIPTIONFH20 CLAW HAMMER FIBERGLASS HANDLE 20ozLH3 LUMP HAMMER TIMBER HANDLE 3lb

LH3FG LUMP HAMMER FIBREGLASS HANDLE 3lb SH10 SLEDGE HAMMER FIBREGLASS HANDLE 10lb E20C ESTWING CLAW HAMMER 20oz LEATHER GRIP

E3-20C ESTWING CLAW HAMMER 20oz SHOCK REDUCTIONE3-28C-24 ESTWING CLAW HAMMER ENGLISH 24oz SHOCK REDUCTION

E-24C ESTWING CLAW HAMMER 24oz LEATHER HANDLE

E3-28SM ESTWING 28oz FRAMING HAMMERE-MRF20C ESTWING CLAW HAMMER SURE STRIKE 20oz FIBREGLASS HANDLE

PLUMBOSSAUSTRALIA

43

GENE

RAL T

OOLS

9.43 CROW BARS & WRECKING BARS

PRODUCT CODE DESCRIPTIONCB25 HEX CROW BAR 6’x1” (1.8m x 25mm) CB32 HEX CROW BAR 6’ x 1 ¼” (1.8m x 32mm) SB25 HEX SPUD BAR 6’x1” (1.8m x 25mm) SB32 HEX SPUD BAR 6’x1 ¼” (1.8m x 32mm) WB18 WRECKING BAR 18” (450mm)WB24 WRECKING BAR 24” (600mm) WB36 WRECKING BAR 36” (900mm)

EWB18 ESTWING WRECKING BAR 18” (450mm)EWB24 ESTWING WRECKING BAR 24” (600mm)EWB36 ESTWING WRECKING BAR 36” (900mm)EHB15 ESTWING HANDY BAR 15” (381mm)

9.44 SHOVELS / PICKS / HANDLES

PICK AND MATTOCK HEADS ARE SOLD SEPERATELY TO HANDLE

Images, left to right:PMHA, MHE02, SCYL, HG350, ST10, SRMT10, SPHF20

CROW BAR SPUD BAR

PRODUCT CODE DESCRIPTION DISCOUNT QTY.SRMT10 ROUND MOUTH SHOVEL - TIMBER HANDLE 6SRMF20 ROUND MOUTH SHOVEL - FIBREGLASS HANDLE 6

SCYL10 POST HOLE SHOVEL - TIMBER HANDLE 6SPHF20 POST HOLE SHOVEL - FIBREGLASS HANDLE 6

ST10 TRENCHING SHOVEL - TIMBER HANDLE 6LHSB TIMBER SHOVEL HANDLE N/A

HG350 ALL STEEL SQUARE MOUTH D HANDLE SHOVEL 6PHE01 PICK HEAD N/AMHE02 MATTOCK HEAD N/APMHA PICK/MATTOCK HANDLE ONLY N/A

AUST

RALI

A’STR

USTE

DPL

UMBI

NGTO

OL B

RAND

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


9.45 TROWELS / FLOATS

PRODUCT CODE DESCRIPTIONPT150 POINTING TROWEL 6” (150mm) GT175 GAUGING TROWEL 7” (175mm)

9.46 WORK LIGHT

PRODUCT CODE DESCRIPTION60LED 60 LED WORK LIGHT

GENERAL TOOLS 44

PLUMBOSSAUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


9.45 TROWELS / FLOATS

PRODUCT CODE DESCRIPTIONPT150 POINTING TROWEL 6” (150mm) GT175 GAUGING TROWEL 7” (175mm)

9.46 WORK LIGHT

PRODUCT CODE DESCRIPTION60LED 60 LED WORK LIGHT

GENERAL TOOLS 44

PLUMBOSSAUSTRALIA

10valve boxes

10.1 VALVE BOXES 2

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00


10.1 VALVE BOXES

150mm RESIDENTIAL VALVE BOX Code: NP1-11

Ideal as a small inconspicuous valve �

box for residential systemsTapered wall for extra rigidity�

“T-Lip”�

CARTON QUANTITY: 20 PER CARTON / 480 PER PALLET

250mm ROUND VALVE BOXCode: NP2-21

Strong load strength�

Easy storage / transport�

Easy to install�

Pipe cut outs�

Lid retainer bolt�

Leak proof snap on “T” lip �

over prevents dirt ingress

PALLET QUANTITY: 120

FEATURES: All boxes have a two-step design for covers. This provides double support and helps lock out debris and dirt. Strong design of box and ribs provides extra structural support and prevents movement once box is installed.

Structural design of covers adds strength to carry heavier load weights. Four “closure snaps” assure a secure fit, but require no special tools in order to remove cover.

VALVEBOXES

2PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0


10.1 VALVE BOXES

150mm RESIDENTIAL VALVE BOX Code: NP1-11

Ideal as a small inconspicuous valve �

box for residential systemsTapered wall for extra rigidity�

“T-Lip”�

CARTON QUANTITY: 20 PER CARTON / 480 PER PALLET

250mm ROUND VALVE BOXCode: NP2-21

Strong load strength�

Easy storage / transport�

Easy to install�

Pipe cut outs�

Lid retainer bolt�

Leak proof snap on “T” lip �

over prevents dirt ingress

PALLET QUANTITY: 120

FEATURES: All boxes have a two-step design for covers. This provides double support and helps lock out debris and dirt. Strong design of box and ribs provides extra structural support and prevents movement once box is installed.

Structural design of covers adds strength to carry heavier load weights. Four “closure snaps” assure a secure fit, but require no special tools in order to remove cover.

VALVEBOXES

2PLUMBOSS AUSTRALIA

10.1 VALVE BOXESCONT

250mm x 300mm x 250mm RECTANGULAR VALVE BOX Code: NP3-31

Lightweight�

High load strength�

Easy Handling�

Excellent for single 50/80 mm valves�

PALLET QUANTITY: 120 Extension to NP3-31Code: NP3X

Extension for extra depth�

250mm x 400mm x 320mm STANDARD RECTANGULAR BOX Code: NP4-41

Rib Structure to provide extra strength and prevents �

movement once installed.

PALLET QUANTITY: 84 Extension to NP4-41 Code: NP4X

Extension for extra depth installations�

3VA

LVE

BOXE

SSE

RVIN

G AU

STRA

LIA’S

TRA

DESM

EN S

INCE

198

6

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

Ph

: 0

7 -

33

26

15

00



VALVEBOXES

4

DURA 350mm x 475mm x 150mm RECTANGULAR VALVE BOX Code: NP4LP-41

For use in non-vehicular traffic areas�

Suits manifold of multiple valves or larger valves�

Low depth profile saves installation time�

Snap Lid for easy access�

T-lip lid design to prevent dirt jamming lid lift�

No Pipe cut-outs �

PALLET QUANTITY: 98

DURA 425mm x 575mm x 300mm RECTANGULAR VALVE BOX Code: NP5-51



Standard depth profile suits most commercial jobs�



Pipe cut-outs �

PALLET QUANTITY: 48

PLUMBOSS AUSTRALIA

Emai

l: S

ales

@cl

tool

cen

tre.

com

Established 1969

P

h:

07

- 3

32

6 1

50

0



VALVEBOXES

4








PALLET QUANTITY: 98

DURA 425mm x 575mm x 300mm RECTANGULAR VALVE BOX Code: NP5-51



Standard depth profile suits most commercial jobs�



Pipe cut-outs �

PALLET QUANTITY: 48

PLUMBOSS AUSTRALIA


5VA

LVE

BOXE

SAU

STRA

LIA’S

TRU

STED

PLU

MBIN

G TO

OL B

RAND

PRODUCT CODE DESCRIPTIONNP1-11 ROUND ECONOMY TURF BOX 6” (150mm) w/-COVER NP11 COVER ONLY 6” (145mm)

NP2-21 CIRCULAR VALVE BOX 10” (250mm) w/-COVERNP21 COVER ONLY 10” (250mm)

NP3-31 RECTANGULAR VALVE BOX 250mm x 300mm x 250mm w/-COVERNP31 COVER ONLY 255mm x 305mmNP3X EXTENSION ONLY 250mm x 300mm x 165mm

NP4-41 STANDARD VALVE BOX 250mm x 400mm x 320mm w/-COVER.NP41 COVER ONLY 265mm x 405mmNP4X EXTENSION ONLY 400mm x 250mm x 165mm

NP4LP-41 STANDARD LOW PROFILE BOX 350mm x 475mm x 150mm w/-COVERNP5-51 JUMBO VALVE BOX 425mm x 515mm x 300mm w/—COVERNP51 COVER ONLY 540mm x 380mm

NP5LP-51 JUMBO LOW PROFILE BOX 425mm x 575mm x 150mm w/-COVER








PALLET QUANTITY: 56

ALL VALVE BOXES CAN BE PURCHASED INDIVIDUALLY OR AS A DISCOUNTQUANTITY BUY P.O.A

Documents

Plumboss Tube & Piping Tools