PNDMV007

March 2013

Process Industry Practices Piping

PIP PNDMV007 Butterfly Valve Data Sheet and Standard Terms

PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice.

This Practice is subject to revision at any time.

© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User’s client. PIP’s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice.

PRINTING HISTORY March 2013 Issued

Not printed with State funds

March 2013

Process Industry Practices Page 1 of 7

Process Industry Practices Piping

PIP PNDMV007 Butterfly Valve Data Sheet and Standard Terms

Table of Contents

1. Introduction .................................. 2 1.1 Purpose .............................................. 2 1.2 Scope ................................................. 2

2. Requirements ............................... 2

Data Form PNDMV007-D Butterfly Valve Data Sheet

PIP PNDMV007 Butterfly Valve Data Sheet and Standard Terms March 2013


1. Introduction

1.1 Purpose This Practice provides a data sheet and standard terms used for specifying butterfly valves.

1.2 Scope This Practice describes, in table format, the standard terms used in the drop down menus of the PIP butterfly valve data sheet appended to this Practice.

1.3 Additional New Standard Terms This first issue of this Practice contains only those standard terms used in PIP Valve Description Practices. In addition to new standard terms added by PIP as required to support new valve descriptions, future publications of this Practice may also contain additional valve description terms that are in general valve industry usage but not in the PIP Valve Descriptions Practices. Additional standard terms associated with non-PIP valve descriptions may be submitted to the PIP office at [email protected] for consideration for adoption into this Practice.

2. Requirements

Table 1 provides standard terms for specifying the characteristics of a butterfly valve using the PIP PNDMV007-D Data Sheet. The terms are included in drop down menus for each cell in the data sheet.

Table 1 – Butterfly Valve Characteristics Standard Terms

Characteristic Standard Terms

Valve Size Range (Min.)

NPS 1/8 NPS 1/4 NPS 3/8 NPS 1/2 NPS 3/4 NPS 1 NPS 1-1/4 NPS 1-1/2 NPS 2 NPS 2-1/2 NPS 3

NPS 3-1/2 NPS 4 NPS 5 NPS 6 NPS 8 NPS 10 NPS 12 NPS 14 NPS 16 NPS 18 NPS 20

NPS 22 NPS 24 NPS 26 NPS 28 NPS 30 NPS 32 NPS 34 NPS 36 NPS 38 NPS 40 NPS 42


NPS 78 NPS 84 NPS 90 NPS 96 NPS 102 NPS 108 NPS 120 NPS 144

Valve Size Range (Max.)

NPS 1/8 NPS 1/4 NPS 3/8 NPS 1/2 NPS 3/4 NPS 1 NPS 1-1/4 NPS 1-1/2 NPS 2 NPS 2-1/2 NPS 3





mailto:[email protected]



Table 1 – Butterfly Valve Characteristics Standard Terms (continued)


Valve Size NPS 1/8 NPS 1/4 NPS 3/8 NPS 1/2 NPS 3/4 NPS 1 NPS 1-1/4 NPS 1-1/2 NPS 2 NPS 2-1/2 NPS 3





Service - Class Cryogenic Flammable General or utility

High pressure High temperature Lethal

Low temperature Toxic

Service - Fluid Type

Air - instrument Air - plant Ammonia - anhydrous liquid Butane - liquid Carbon Dioxide - dry Carbon Dioxide - wet Crude oil - sour Crude oil - sweet Fuel gas Fuel oil Glycol Hydrochloric acid Lube oil Nitrogen

Nitric acid LNG Oxygen Propane Sewer sanitary - forced/gravity Steam, condensate Sulphur - liquid Water - boiler feed Water - fresh, cooling tower; Water

- demineralized Water - fire - AG Water - fire - BG Water - potable Water - sea

End Connection - Type

Compression Flanged

Lugged Threaded

Wafer Welded

End Connection - Style

Bolt holes tapped Bolt holes untapped BW Ferrule tube FF

MJ Oversized reducing

flange Push On RF

RF, Molded Roll Grooved SW Tubing

End Connection - Ends Standard

ANSI/AWWA C110/A21.10 ANSI/AWWA C111/A21.11 API 609 ASME B1.20.1 ASME B16.1 ASME B16.1 Class 125 ASME B16.11

ASME B16.25 ASME B16.47 ASME B16.47 Series B ASME B16.5 ASME B16.5 Class 125 ASME B16.5 Class 150 Mfg std

End Connection - Flange Face Finish Std

ASME B16.5 Mfg std Other





Pressure Rating - Class

ASME 75 ASME 125 ASME 150 ASME 200



ASME 2500 ASME 4500 ASME 6000 Mfg std

Body/Bonnet Material - Body - Material

Vinyl Ester – Graphite Reinforced

CI DI DI, Epoxy Coating

DI, PPS Coating CPVC PP - type 1 PVC CS

ITCS SS CK3MCuN Zirconium

Body/Bonnet Material - Body - ASTM Number

A105 A126-B A182-F316 A216-WCB A350-LF2-CL-1

A351-CF8M A351-CK3MCuN A352-LCB A352-LCC A395

A536-65-45-12 B550-UNS-R60705 B752-UNS-R60705 D1784-12454

Body/Bonnet Material - Body - Manufacturing Process

Annealed Cast Die formed

Forged Heat treated Precipitation hardened

Other

Trim Material - General Material

PFA PTFE

Trim Material - Disc - Material

Aluminum Bronze Vinyl Ester – Graphite

Reinforced CI CI, PFA Lining CI, PTFE Lining

DI, EDPM Coating DI, PFA Lining DI, PTFE Lining CPVC PP PVC

CS, PFA Lining CS, PTFE Lining SS 316 SS Zirconium

Trim Material - Disc - ASTM Number

A126-B A182-F44 A276-UNS-S31600 A351-CF8M

A351-CK3MCuN A395 A48-40 A536-65-45-12

B148 B148-UNS-C84400 B550-UNS-R60705 B752-UNS-R60705

Trim Material - Seat - Material

Mfg std Buna-N

EPDM RTFE

PTFE 316 SS

316 SS, Hard Facing

Trim Material - Seat Insert - Material

Mfg std Buna-N

EPDM RTFE

PTFE 316 SS

316 SS, Hard Facing

Trim Material - Stem - Material

Mfg std SS 17-4 PH SS

17-4 PH SS w/Molded Graphite/Vinyl Ester

316 SS Zirconium





Trim Material - Stem - ASTM Number

A126-B A182-F44 A276-UNS-S31600 A351-CF8M

A351-CK3MCuN A395 A48-40 A536-65-45-12

B148 B148-UNS-C84400 B550-UNS-R60705 B752-UNS-R60705

Trim Material - Disc Seal Ring - Material

Laminated SS Solid SS

Type & Design - Body - Type

Double-flanged Lug Wafer

Type & Design - Design

Concentric High performance Triple offset

Operation - Manual Operator

Gear Handle Handle - T-bar Handwheel

Handwheel – oval Lever Lever - bellcrank

Lever - hi-hub with lockout

Post indicator

Operation - Provided Actuator

Electric - motor Hydraulic

Hydraulic - pneumatic Pneumatic

Stem Packing & Stem Seals - Packing Material

Asbestos-free Graphite Flexible Graphite Alloy C Buna-N EPDM

FKM - Kalrez Viton, PTFE Coating FKM PFA PFA – virgin RTFE

PTFE PTFE, Filled TFE 316 SS

Stem Packing & Stem Seals - Packing Specs

Anti-extrusion rings Corrosion inhibited

Lantern ring Packing box purged

P energized seal

Stem Packing & Stem Seals - Packing Mfr Proc

Annealed Cast Die formed

Forged Heat treated

Precipitation hardened Other

Stem Packing & Stem Seals - Stem Seal Matl




Stem Packing & Stem Seals - Stem Seal Type

Bellows seal Braided rings Diaphragm

Laminated Solid V-ring - standard

V-ring - twin V-ring - vacuum





Body/Bonnet Gaskets - Gasket - Material

Asbestos-free Graphite Flexible Graphite Alloy B2 Mica

EPDM FKM RTFE PTFE PTFE, Filled

TFE 304H SS 316 SS 321 SS 321H SS

347 SS 347H SS

Body/Bonnet Gaskets - Gasket - Form

O-ring Ring

Ring Joint Solid flat

Spiral wound

Body/Bonnet Gaskets - Gasket - Standard

API 600 API 602 ASME B16.20

Other Seals - Body - Material




Other Seals - Body - Type

Diaphragm O-ring Solid

Other Seals - Seat - Material




Other Seals - Seat - Type

Diaphragm O-ring Solid

Body/Bonnet Bolting - Bolts - Material

CS SS

304 SS Steel Alloy

Body/Bonnet Bolting - Bolts - ASTM Number

A193 A193, as applicable

A193-B16 A193-B7

A320-L7 B408-UNS-N08811

Body/Bonnet Bolting - Nuts - Material

CS SS

304 SS Steel Alloy

Body/Bonnet Bolting - Nuts - ASTM Number

A194 A194, as applicable

A194-2H A194-3

A194-4 B564-UNS-N08811





Body/Bonnet Bolting - Nuts - Type

Heavy hex

Standards - Design

API 609 API 609 - A API 609 - B

API 609 - B, as applicable

ASME B16.34 AWWA C504

Mfg std MSS SP-67 UL - FM

Standards - Dimensions

API 609 - A API 609 - B API 609 - B – short

pattern

AWWA C504 ISO 5752 - short ISO 5752 - long

Mfg std

Standards - Rating

ASME B16.1 ASME B16.34

AWWA C504 Mfg std

Standards - Testing

API 598 API 600

API 603 API 608

Standards - Fire Safe Specification

API 607 API 6FA

Fire tested Fire tested for external leakage

Butterfly Valve Data Sheet PNDMV007-DRevision

URL Min

Class

Code

Class/Fluid Type Detailed desc.Service Temp (Min/Max)User service names

End Connection

Flange Face Finish Standard Ra(LRL/URL) μm

Pressure psi g Class Remarks

ASTM NumberBody General

DiscSeatSeat insertStem

Remarks Disc seal ringPins or wedgesSeat energizerSeat retainerRetainer screwsRemarks

Type and Design

Body Body

Design Remarks Extended Bonnet for Cryogenic Service Trim

Operation

Stem Packing and Stem Seals Mfg Std

Stem Seal2ndry Mfg StdPacking

Body-Bonnet Gaskets Mfg Std Gasket Standard

Gasket

Other Seals Mfg StdBodySeat

Body-Bonnet Bolting Mfg StdBoltsNuts

StandardsDesign & RatingDimension (face to face) Testing

Fire Safe Specification Oxygen Cleaned per CGA C-4.1 and G-4.4/ASTM G-93 Remarks

Face to Face Dimension in Valve Orientation Inclination Angle degCenterline to Operator Top ft Dry Weight lb (from horizontal)

Additional Information

Notes

RemarksMaterial ASTM NumberType

RemarksMaterial Type

Material Specifications Remarks

Manufacturing Process V-rings Low Emission

RemarksMaterial Form

RemarksMaterial Type

No. of pieces

Manual Operator Provided Actuator Remarks

RemarksType

Manufacturing Process

Pressure Rating

Body Material Trim MaterialMaterial ASTM Number Material

Type Style Ends Standard Remarks

PIP Line Class

Service

Pressure (Min/Max) psi

Purchaser Alternative Valve CodesSub-catalog Sub-catalog Code Sub-catalog Code Sub-catalog Code

Purchaser Line ClassesSub-catalog Sub-catalog Class Sub-catalog Class Sub-catalog Class

PIP Valve Size Range (Min/Max)

Company Name Model Number Drawing Number Size MaxRecommended Manufacturer/Supplier Valve Details Valve Size / Range

Approved

Catalog Name Current valve of

Date Remarks

PIP Valve Size

Valve Code Number

PIP Revision

Owner/Role/URL Purchaser

PIP Catalog Valve Number

°F

Documents

PNDMV007