Upload
duongdung
View
226
Download
1
Embed Size (px)
Citation preview
PNEUMATIC CONVEYING
DEDUSTING
VENTILATION
RAYMAN spol. s r. o. www.rayman.cz ___________________________________________________________________________
More information can be found in the technical terms RK 12 1355 on our website
www.rayman.cz.
___________________________________________________________________________
RAYMAN spol. s r. o. » seat: Ocelárenská 1781, 272 01 Kladno, Czech Republic Tel.: +420 312 247 252 fax: +420 312 247 621 e-mail: [email protected] RAYMAN spol. s r. o. » technical office: Nádražní 688, 399 01 Milevsko, Czech Republic Tel.: +420 382 522 115 fax: +420 382 522 117 e-mail: [email protected]
VENTURI (EJECTOR) FEEDER EP
A Venturi feeder is determined to pneumatic conveying of dry and loose powder and
fine grain materials. Feeder feeds material continually under pressure of conveying air
(gas) to pneumatic conveying
pipeline. Ejecting effect of
conveying air stream decreases
pressure in inlet chamber so
conveyed material is fed into conveying
pipeline. Used construction parts are pipeline
parts; the feeder is in light of inside
overpressure in conformity with regulation No.
26/2003 and is considered as a pipeline that
isn’t a pressure device. Temperature of ambient
temperature isn’t limited.
Venturi feeder is delivered in both, standard and wear
proof design with mixing chamber of cylindric or T shape.
Wear proof design has inner parts in contact with material
stream made of Si - ceramics. The conveying pipeline leads from the feeder body
horizontally or is inclined up. The air nozzle is movable to set the air stream ejecting
effect.
Venturi Feeder EP
Basic technical data Venturi Feeder parameters:
Conveying capacity up to 10 t/h, depends on conveying pipeline and conveying air pressure
Maximal temperature of conveyed material 100 °C resp. 200 °C
Ambient air temperature without limits
Maximal operating pressure 0,05 MPa
Mass acc. size and design
Inlet flange and shape of mixing chamber will be given in an equipment design and they will be delivered with
accordance with the equipment design by an order.
Boring od outlet flange DΝ 50, DΝ 65, DΝ 80, DΝ 100, DΝ 125, DΝ 150, DΝ 180, DΝ 200, DΝ 250
Conveying air needs:
Parameters acc. design
Temperature max. 100 °C
Quality oil and dust free, dewatered resp. dried (depends on conveyed material qualities)