Upload
vuminh
View
217
Download
0
Embed Size (px)
Citation preview
POLIboxPozzetti con cilindro portapaloWell boxes with pole holder cylinder
RoHS
C O M P L I A N T2
Pozzetti con fondo chiuso pretranciato Materiale PolipropileneTemperatura esercizio -15 +90°CCarico massimo sopportabile, modalità di prova secondo UNI EN 124
Well-boxes with closed precutted bottom Material PolypropyleneWorking Temperature -15 +90°CMax loading resistance complied to UNI EN 124
B
C
A
ArticoloItem
Pozzetto con coperchioWell boxe with cover
Carico massimoMax loading
Colore coperchioCover colour
Amm
Bmm
Cmm
2525V 300 Kg Verde pratoGreen lawn 250 250 250
2525G 300 Kg Grigio pietraGrey stone 250 250 250
2525R 300 Kg Rosso mattoneRed Brick 250 250 250
Per basi e coperchi separati vedere listino figurato278
Linea BOXY
I pozzetti portapalo POLI BOX han-no un cilindro interno per l’inseri-mento di un palo d’illuminazione Ø 60 mm, sono forniti con 4 viti in acciaio INOX e 1 flangia di finitura.
The well boxes POLI BOX have a cylinder inside, for a lighting pole Ø 60 mm.They are supplied with 4 stainless steel screws and 1 finish frame.
I pozzetti POLI BOX hanno un nuo-vo coperchio con il bordo mag-giorato che copre la base. Questa nuova soluzione garantisce sem-pre un’estrazione del coperchio facile e veloce.
The well boxes POLI BOX have a new cover with a brighter board. This new solution guarantees an easy and quickly extraction.
Vantaggi
1 La sede del portapalo ha un diametro di 80 mm che consente: - Il fissaggio del palo, riempiendo l’intercapedine con sabbia o sigillante schiumogeno. - La compensazione, fino a 4°, di un’eventuale incli- nazione del terreno
2 Vano per connessioni elettriche e per messa a terra, utilizzare il Kit sigillante IP68, pag 240.
3 Il pozzetto è pretranciato per la completa asportazione del fondo per l’installazione dei dispersori di terra.
4 Il pozzetto è fornito con una flangia di finitura in pla- stica per la copertura dell’intercapedine portapalo.
Advantages
1 The pole-holder cavity has a diameter of 80 mm that allows: - The fixing of the lighting pole, filling the cavity with sand or sealing foam. - The compensation, till 4°, of a possible ground rise.
2 Space for electric and ground connections, use the sealing Kit, see page 240.
3 The well box is pre-sheared to remove the bottom for the installation of the ground rods.
4 The well box is supplied with a finishing plastic frame to cover the casing for the lighting pole.
Fino/till 4°
4
12
3
Linea BOXY
279
DRAINboxPozzetti elettrici e per irrigazioneElectric and irrigation well boxes
RoHS
C O M P L I A N T2
Guida DIN integrata per morsettiera di terraIntegrated DIN rail for grounding terminal
Accessorio per palo illuminazione Ø 60 mmAccessory for lighting pole Ø 60 mm
Predisposizione per scatola di derivazionePre-arrangement for derivation box
280
Linea BOXY
Pozzetti con fondo aperto Materiale PolipropileneTemperatura esercizio -15 +60°CCarico massimo sopportabile, modalità di prova secondo UNI EN 124
Well-boxes with opened bottom Material PolypropyleneWorking Temperature -15 +60°CMax loading resistance complied to UNI EN 124 D
C
E
A
B
ArticoloItem
Pozzetto con coperchioWell boxe with cover
Colore coperchioCover colour
Carico massimoMax loading
Amm
Bmm
Cmm
Dmm
Emm
PB1520V Verde pratoGreen lawn
130 Kg 200 150 175 125 120PB1520G Grigio pietraGrey stone
PB1520R Rosso mattoneRed Brick
PB2020V Verde pratoGreen lawn
400 Kg 180 180 250 250 210PB2020G Grigio pietraGrey stone
PB2020R Rosso mattoneRed Brick
PB3030V Verde pratoGreen lawn
500 Kg 230 230 320 320 230PB3030G Grigio pietraGrey stone
PB3030R Rosso mattoneRed Brick
PB4040V Verde pratoGreen lawn
500 Kg 300 300 405 405 300PB4040G Grigio pietraGrey stone
PB4040R Rosso mattoneRed Brick
PB4050V Verde pratoGreen lawn
1.200 Kg 405 280 525 395 300PB4050G Grigio pietraGrey stone
PB4050R Rosso mattoneRed Brick
PB5060V Verde pratoGreen lawn
600 Kg 455 380 605 520 300PB5060G Grigio pietraGrey stone
PB5060R Rosso mattoneRed Brick
Per basi e coperchi separati vedere listino figurato
Linea BOXY
281
Dimensione CAVIDOTTI installabiliCorrugated pipes dimensions possible to install
ArticoloItem
Ø25mm
Ø30mm
Ø40mm
Ø50mm
Ø63mm
Ø75mm
Ø90mm
Ø110mm
Ø125mm
Ø140mm
Ø160mm
Ø200mm
PB1520 • • • •PB2020 • • • • • •PB3030 • • • • •PB4040 • • • • •PB4050 • • • • • • •PB5060 • • • • • •
Quantità elettrovalvole installabiliSolenoid valves quantity possible to install
ArticoloItem 1 2 3 4 6 8
PB2020 •PB3030 • •PB4040 • • • •PB4050 • • • • •PB5060 • • • • • •
Tappo per fondo e separatore internoBottom cap and internal separator
ArticoloItem
Per pozzettoFor well box
PF2020 PB2020
PF3030 PB3030
PF4040 PB4040
PF4050 PB4050
PF5060 PB5060É possibile chiudere il fondo del pozzetto e separarlo internamenteIt is possible to close the bottom of the well box and to separate it internally
Guida DIN per base pozzettoDIN rail for well box base
ArticoloItem
Tipo guidaRail type
PGDDIN Omega 3
DIN Omega 3
All’interno del pozzetto possono essere montate morsettiere di terra Inside the well box can be mounted grounding terminals
282
Linea BOXY
Fresa a tazza per taglio coperchioHole saw for cover cutting
ArticoloItem
DimensioneDimension
PFT90 Ø 90 mm
Cilindro portapaloQuesto accessorio permette l’installazione di un palo di illuminazione Ø 60 mm. Il diametro interno del cilindro è maggiorato, per potere recu-perare un’eventuale pendenza del terreno, max 4°. Lo spazio rimanente nel cilindro portapalo dovrà essere riempito con sabbia o schiumogeno.
Pole holder cylinderThis accessory allows the installation of a lighting pole of Ø 60 mm. The diameter of the pole holder cylinder is bigger, to regain the inclination of ground, max 4°. The remaining space in the cylinder must be filled with sand or foamer.
Giunto in gel e supporto di fissaggioGel joint and fixing support
ArticoloItem
DescrizioneDescription
PM2Bipolare
Bipolar
PRM4Per 2/4 giunti
For 2/4 joints
Per informazioni tecniche vedere pagina 288For technical infornations see page 288
NEW
Cilindro portapaloPole holder cylinder
ArticoloItem
DimensioneDimension
PBR60 Ø 60 mm Cilindro porta paloPole-holder cylynder
Terreno drenanteDraining ground
Vano per connessioni elettriche e messa a terra
Space for electricconnections and earthing
All’interno del pozzetto possono essere installati giunti in gelInside the well box can be mounted gel joints
NEW
Linea BOXY
283
Scatola di derivazione per pali Ø 60 mmDerivation box for lighting poles Ø 60 mm
Materiale PolipropileneDimensione Ø 52 mm x 170 mmColore Grigio
Dimension: Ø 52 mm x 170 mmMaterial Polypropylene Colour Grey
ArticoloItem
Articoli inclusiIncluded items
PVR60 Scatola di derivazioneDerivation box
PVR60M
Scatola di derivazione con 3 morsetti BOXLINE 6 mm2
Derivation box with 3 terminal blocks BOXLINE 6 mm2
RoHS
C O M P L I A N T2
1 Vano per derivazioneSpace for derivation
5
4
6
1
3
2
2 Bordino di tenuta interno paloEdge for internal pole holding
3 Fori per estrazione della scatolaHoles for extraction of the box
4 Foro per passaggio caviHoles for cables passage
5 Asole pre-tranciatePre-cutted holes
6 SerracaviCables holder
284
Linea BOXY
Pali in vetroresina Ø 60 mmFiberglass poles Ø 60 mm
Materiale VetroresinaTemperatura d’esercizio -25 +85°CColore Nero
Material FiberglassWorking Temperature: -25 +85°CColour Black
ArticoloItem
DimensioneDimension
PVR10 Ø 60 mm x 1,0 m
PVR15 Ø 60 mm x 1,5 m
PVR20 Ø 60 mm x 2,0 m
PVR25 Ø 60 mm x 2,5 m
PVR30 Ø 60 mm x 3,0 m
PVR35 Ø 60 mm x 3,5 m
PVR40 Ø 60 mm x 4,0 m
RoHS
C O M P L I A N T2
Linea BOXY
285
IDRAboxPozzetti elettrici con fondo chiusoElectric well boxes with closed bottom
RoHS
C O M P L I A N T2
Installazione di un dispersore di terraHearthing rod installation
Predisposizione per scatola di derivazionePre-arrangement for derivation box
286
Linea BOXY
NEW
NEW
NEW
NEW
Pozzetti con fondo chiuso pretranciato Materiale PolipropileneTemperatura esercizio -15 +60°CCarico massimo sopportabile, modalità di prova secondo UNI EN 124
Well-boxes with closed precutted bottomMaterial PolypropyleneWorking Temperature -15 +60°CMax loading resistance complied to UNI EN 124
E
D
C
A
B
ArticoloItem
Pozzetto con coperchioWell box with cover
Colore coperchioCover colour
Carico massimoMax loading
Amm
Bmm
Cmm
Dmm
Emm
PZ1520G Grigio pietraGrey stone 100 Kg 200 150 175 125 155
PZ1818G Grigio pietraGrey stone 350 Kg 180 180 125 125 185
PZ2323G Grigio pietraGrey stone 300 Kg 230 230 170 170 235
PZ3232G Grigio pietraGrey stone 400 Kg 300 300 215 215 300
Linea BOXY
287
Giunto in gel e supporto di fissaggio Joints with gel and fixing support RoHS
C O M P L I A N T2
Cavi: max 2 x 2,5 mm²Materiale: PolipropileneTemperatura d’esercizio: -15°C +60°C
Cables: max 2 x 2,5 mm²Material: PolypropyleneWorking Temperature: -15°C +60°C
A BC
ArticoloItem
DescrizioneDescription
Amm
Bmm
Cmm
PM2 Giunto bipolare con gel e morsetti ad avvitamento direttoBipolar joint with gel and screw terminals 65 23 54
Materiale: PolipropileneTemperatura d’esercizio: -15 +60°C
Material: PolypropyleneWorking Temperature: -15 +60°C
C
D
B
A
ArticoloItem
DescrizioneDescription
Amm
Bmm
Cmm
Dmm
PRM4 Supporto per applicare 2/4 giunti su pozzetti DRAINboxSupport for mounting 2/4 joints on DRAINbox well boxes 59 22 215 112
NEW
NEW
Sui pozzetti IDRAbox, il giunto in gel si ap-plica senza l’ausilio del supporto di fissaggio articolo PRM4On the IDRAbox well boxes, the gel joint is mounted without the fixing support item PRM4
Sui pozzetti DRAINbox, per il montaggio del giunto in gel, si deve usare il supporto di fissag-gio PRM4On the DRAINbox well boxes, for the mounting of the gel joint, must be used the fixing support item PRM4
Il supporto di fissagio per giunti in gel può es-sere usato anche per soli 2 giunti, tagliandolo lungo la pretranciatura (vedi foto)The fixing support for gel joints, can be used also for 2 joints only, cutting it along the pre-cutting lines (see photo)
288
Linea BOXY
Pozzetti con fondo chiuso pretranciatoMateriale PolipropileneTemperatura esercizio -15 +90°CCarico massimo sopportabile, modalità di prova secondo UNI EN 124
Well-boxes with closed precutted bottomMaterial PolypropyleneWorking Temperature -15 +90°CMax loading resistance complied to UNI EN 124
BC A
BD
A
ArticoloItem
Colore coperchioCover colour
Carico massimoMax loading
Amm
Bmm
Cmm
dmm
PZC2020 GrigioGrey 165 Kg 200 200 200
PZC3030 GrigioGrey 235 Kg 290 290 295
PZC4040 GrigioGrey 250Kg 390 390 395
Telaio e coperchioFrame and cover
PTL2020 GrigioGrey 165 Kg 240 240 19 19
PTL3030 GrigioGrey 235 Kg 335 335 20 20
Guarnizione in gommaRubber sealing
PGR2020 NeroBlack 200 200 -
PGR3030 NeroBlack 290 290 -
PGR4040 NeroBlack 390 390 -
EASYboxPozzetti con coperchioWell boxes with cover
RoHS
C O M P L I A N T2
Linea BOXY
289